Hello!
I want to change my android version and i want to install the latest CM9 =)
but i have a question..i have the latest italian version of android
Android Version: 4.0.4
Kernel: 3.0.15 - N7000XXLRI
Baseband: N7000XXLRB
i just bricked it once a few month ago :highfive: but i want the CM9!
I have ROOT!
Q: can i change the OS without dangers to bricked up my phone again?
thanks
Yes, you can but to be 100% safe, I recommend you first downgrade to stock GB and then flash cm9. Using some safe kernel on ics rom will work too, you can find instructions in the particular rom thread.
Sent from my GT-N7000
dek4 said:
Hello!
I want to change my android version and i want to install the latest CM9 =)
but i have a question..i have the latest italian version of android
Android Version: 4.0.4
Kernel: 3.0.15 - N7000XXLRI
Baseband: N7000XXLRB
i just bricked it once a few month ago :highfive: but i want the CM9!
I have ROOT!
Q: can i change the OS without dangers to bricked up my phone again?
thanks
Click to expand...
Click to collapse
Just flash notecore or speedmod kernels via odin... Then go cwm and do all the wipes and flash cm9 and gapps
Once booted Into android get triangle away app and remove the yellow triangle that's it
Sent from my GT-N7000 using xda premium
msedek said:
Just flash notecore or speedmod kernels via odin... Then go cwm and do all the wipes and flash cm9 and gapps
Once booted Into android get triangle away app and remove the yellow triangle that's it
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
thaks! can i use also the temporarly CWM?
Only if you want to brick your phone, temp touch cwm is not safe, dont use it.
Sent from my GT-N7000
jeetu1981 said:
Only if you want to brick your phone, temp touch cwm is not safe, dont use it.
Sent from my GT-N7000
Click to expand...
Click to collapse
WoW ... thanks!
i can't find the guide to install the definitive cmw ... how can i do this?
can I install the kernel via Odin Mobile Pro?
And as you said you have root, so use mobile odin to flash custom kernel, it will flash cwm recovery too.
Sent from my GT-N7000
THANKS!!! =)
now i try to flash CM9
Good luck
Clicking thanks button is much easier than typing "thanks", lol
Sent from my GT-N7000
jeetu1981 said:
Good luck
Clicking thanks button is much easier than typing "thanks", lol
Sent from my GT-N7000
Click to expand...
Click to collapse
+1
Sent from my GT-N7000 using xda premium
It WORKS!!! :good: :good: :good:
dek4 said:
It WORKS!!! :good: :good: :good:
Click to expand...
Click to collapse
What do you lose / gain by switching to CM9 - thinking of doing so myself - except I use the S-Pen apps quite a bit - and I assume they stop working?
gf_gollum said:
What do you lose / gain by switching to CM9 - thinking of doing so myself - except I use the S-Pen apps quite a bit - and I assume they stop working?
Click to expand...
Click to collapse
More customization, speed compared to TW roms, and you are right no stock Samsung apps on CM9.
gf_gollum said:
What do you lose / gain by switching to CM9 - thinking of doing so myself - except I use the S-Pen apps quite a bit - and I assume they stop working?
Click to expand...
Click to collapse
this rom is amazing! it's the REAL Android not that thing target by SAMSUNG
i read that it exist a valid app on the market for the s-pen ... the original app doesn't work because they need the original samsung framework
the PEN works perfectly!
dek4 said:
this rom is amazing! it's the REAL Android not that thing target by SAMSUNG
i read that it exist a valid app on the market for the s-pen ... the original app doesn't work because they need the original samsung framework
the PEN works perfectly!
Click to expand...
Click to collapse
This
Sent from my GT-N7000 using xda premium
Related
Hello,
Right now, my Galaxy Note is running a rooted version Samsung ICS:
Android Version: 4.0.3
Baseband Version: N7000XXLPT
Kernel Version: 3.0.150N7000XXLPY-CL474507
Build Number: IML74K.XXLPY
I'd like to try CM10, but I've been reading a lot of issues from people flashing ROMs from Samsung ICS. What would be the safest way to install CM10? Should I downgrade to a Samsung Gingerbread ROM first? What procedure would you guys recommend?
Thanks,
Tiago
It is important to downgrade first to samsung stock GB.
http://www.youtube.com/watch?v=JO93XJ2C8pc&feature=plcp
Follow his instructions to a tee and you should be good to go.
The youtube video is courtesy of aphroditelikesme(all credits to the dude, as I constantly subscribed to his youtube videos)
Don't forget to hit the 'Thank's button if I have helped you in some way or the other.
Thanks a lot!
But should I flash a stock Samsung GB ROM or a rooted GB ROM? Should I use CWM or Odin to flash GB?
tiagobt said:
Thanks a lot!
But should I flash a stock Samsung GB ROM or a rooted GB ROM? Should I use CWM or Odin to flash GB?
Click to expand...
Click to collapse
you can flash the pre rooted GB rom by Chainfire...then flash the cf kernel....do a full wipe and then just flash CM10. Find the procedure here:
http://forum.xda-developers.com/showthread.php?t=1331784
Go to section 1.3 and u find the way....hope it helps....:good:
Flash it to stock GB
here's the other link for the video.. again all courtesy to the creator of that video. http://www.youtube.com/watch?v=jr3DDEh8vyc
There's also the links of the ROM (choose checkROM GB or RocketROM) and the kernel you need to download.
Just follow his video bud, (I'm following his video for flashing roms and I never miss going back to this video to downgrade to GB)
Cheers!
I see. So flashing Abyss kernel from Samsung ICS (LPY kernel) using CWM is actually safe? I just want to be sure because I've seen many people advising not to use CWM at all if you are on a Samsung ICS ROM.
abysskernel is not an infected kernel, that is why mostly when your going to downgrade to gingerbread.. most flashers will tell you to flash first to abysskernel then flash the GB rom after.
letters_to_cleo said:
abysskernel is not an infected kernel, that is why mostly when your going to downgrade to gingerbread.. most flashers will tell you to flash first to abysskernel then flash the GB rom after.
Click to expand...
Click to collapse
OK, I flashed Abyss kernel (worked fine), rebooted recovery, made a full wipe, flashed Rocket ROM and rebooted the system. I see the boot animation, but after that, nothing happens (blank screen). I've waited over 5 minutes, but the ROM doesn't boot. Anything else I can try?
I'm f*cking tired of explaining this over and over again...MY GOD!! You could've just read the CM9 installation instructions, CHECKED OUT THE STICKIES, ANYTHING LIKE THAT!
THE ONLY 100% SAFE WAY TO GET RID OF AN INFECTED KERNEL IS TO FLASH TO GB THROUGH PC ODIN!! Why the F*CK does everyone prefer to flash abyss and take that risk...!?
IF!! You're confident that RocketRom flashed correctly, you could probably full wipe (AGAIN) from recovery (you'd be on a safe kernel) and that should solve your problem...
Wait for a 2nd opinion though...
eug3n91 said:
I'm f*cking tired of explaining this over and over again...MY GOD!! You could've just read the CM9 installation instructions, CHECKED OUT THE STICKIES, ANYTHING LIKE THAT!
Click to expand...
Click to collapse
Then don't reply, you pud.
Just flash a safe kernel then flash CM10.
Sent from my GT-N7000 using Tapatalk 2
trell959 said:
Just flash a safe kernel then flash CM10.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thanks a lot!
I reflashed Abyss kernel, did a full wipe and installed CM10 right away. It worked just fine! CM10 is working quite well, I'm really impressed!
You guys got me worried for a second. I guess I just had a bad download of Rocket ROM after all.
tiagobt said:
Thanks a lot!
I reflashed Abyss kernel, did a full wipe and installed CM10 right away. It worked just fine! CM10 is working quite well, I'm actually impressed!
You guys got me worried for a second. I guess I just had a bad download of Rocket ROM after all.
Click to expand...
Click to collapse
Glad it worked. Going back to GB is just a myth. If you have a safe kernel to flash from, then use it.
Sent from my GT-N7000 using Tapatalk 2
I know I shouldn't be busting into another's threads but I have a same sort of question.
@tiagobt I hope you don't mind.
Is SpeedMod K3-11 a safe kernel to flash a custom ROM from? I'm running on stock ICS 4.0.3.
Sent from my GT-N7000 using XDA Premium HD app
aurator said:
I know I shouldn't be busting into another's threads but I have a same sort of question.
@tiagobt I hope you don't mind.
Is SpeedMod K3-11 a safe kernel to flash a custom ROM from? I'm running on stock ICS 4.0.3.
Sent from my GT-N7000 using XDA Premium HD app
Click to expand...
Click to collapse
Yes.
Sent from my GT-N7000 using xda app-developers app
i dont know if im intruding too.....
but can we flash a CM9 or CM 10 rom from a speedmod ics kernel on a TW custom ics rom ?
rraaka said:
i dont know if im intruding too.....
but can we flash a CM9 or CM 10 rom from a speedmod ics kernel on a TW custom ics rom ?
Click to expand...
Click to collapse
Yes.
Sent from my GT-N7000 using XDA Premium HD app
post number 744 CM10 thread official preview
wonder which kernel he used ...
Hi Guys... So I have flashed to CM10 on my Note... Running very well.... Does anyone know where I can get the SamsungApps store from?... I've tried various ones from here but cannot seem to get them to work... I've tried the links from below thread but doesn't work... any help would be great.
http://forum.xda-developers.com/showthread.php?t=1632639&page=6
dmonuk said:
Hi Guys... So I have flashed to CM10 on my Note... Running very well.... Does anyone know where I can get the SamsungApps store from?... I've tried various ones from here but cannot seem to get them to work... I've tried the links from below thread but doesn't work... any help would be great.
http://forum.xda-developers.com/showthread.php?t=1632639&page=6
Click to expand...
Click to collapse
All Samsung apps require touchwiz framework and will not run on cm based roms.
Sent from my GT-N7000 using xda premium
Hey Guys,
I want to install the stable release of CM9, but I'm on Criskelo v9 right now.
Do I need to do anything before I flash the CM9 ROM or can I just go to recovery, wipe, and install the new ROM?
Thanks!
Visual360 said:
Hey Guys,
I want to install the stable release of CM9, but I'm on Criskelo v9 right now.
Do I need to do anything before I flash the CM9 ROM or can I just go to recovery, wipe, and install the new ROM?
Thanks!
Click to expand...
Click to collapse
Yes! u ve to downgrade back to GB Rom and do wipes den flash CM9...!!!
All d Best...!!!
When i went from criskelo to cm9
I first flashed abyssnote
Reboot recovery and then did a full wipe and then flashed cm9
Visual360 said:
Hey Guys,
I want to install the stable release of CM9, but I'm on Criskelo v9 right now.
Do I need to do anything before I flash the CM9 ROM or can I just go to recovery, wipe, and install the new ROM?
Thanks!
Click to expand...
Click to collapse
As far as you are on a safe kernel (notecore/speedmod) you can go cwm wipe and flash cm9/10 that's it
Sent from my GT-N7000 using xda premium
msedek said:
As far as you are on a safe kernel (notecore/speedmod) you can go cwm wipe and flash cm9/10 that's it
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks everyone!
Hey msedek, I'm not too familiar with kernels, could you please elaborate.
current kernel:
3.0.15 - N7000XXLRG-CL811902
[email protected] #3
SMP PREEMPT Wed Jul 4 00:57:35 KST 2012
Is that a safe kernel?
Thank you.
It is a stock kernel and not safe, use notecore or speedmod.
Sent from my GT-N7000
jeetu1981 said:
It is a stock kernel and not safe, use notecore or speedmod.
Sent from my GT-N7000
Click to expand...
Click to collapse
Thanks jeetu.
Mind showing me or a link on how to go about doing doing this? Or should I just go back to GB route?
Or any link with similar situation as mine, and proper procedure to go about it.
Thanks again.
Visual360 said:
Thanks jeetu.
Mind showing me or a link on how to go about doing doing this? Or should I just go back to GB route?
Or any link with similar situation as mine, and proper procedure to go about it.
Thanks again.
Click to expand...
Click to collapse
Go to original development section and download notecore kernel.. Flash it via mobile odin and then you are safe to go
Sent from my GT-N7000 using xda premium
msedek said:
Go to original development section and download notecore kernel.. Flash it via mobile odin and then you are safe to go
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks msedek.
Is it this one?
http://forum.xda-developers.com/showthread.php?t=1749863
Visual360 said:
Thanks msedek.
Is it this one?
http://forum.xda-developers.com/showthread.php?t=1749863
Click to expand...
Click to collapse
Yep
Sent from my GT-N7000 using xda premium
msedek said:
Yep
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thank you sir.
I know lots of questions, but just wan to make sure.
Anyway, so just flash this, and flash CM9?
Yay! Running CM9 now.
Thanks everyone.
Hey guys.
I have installed jb leaked on my note and note wont start +_+
Can i have a help plz
Sent from my GT-N7000 using xda premium
Lol thanks for the detailed explanation of your situation /sarcasm.
Seriously bud you're gonna need to give more information than that. Could be anything. Odds are you flashed from an unsafe kernel and your note is toast :/
Sent from my GT-N7000 using XDA Premium HD app
Which kernel did you flash and was the jb rom for the note gt n7000 or the correct one for your model?
Sent from my GT-N7000 using xda premium
so the question is galaxy note didnt start or s note didnt start
Reynaldinho111 said:
Lol thanks for the detailed explanation of your situation /sarcasm.
Seriously bud you're gonna need to give more information than that. Could be anything. Odds are you flashed from an unsafe kernel and your note is toast :/
Sent from my GT-N7000 using XDA Premium HD app
Click to expand...
Click to collapse
Sorry man i install xxls2 speedmod karnel and jb works perfect i mean about the S Note.
Sent from my GT-N7000 using xda premium
better stick to PhiLz JB kernel with XXLS2 and LS7
Yiannis75 said:
Sorry man i install xxls2 speedmod karnel and jb works perfect i mean about the S Note.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
XXLS2 speedmod kernel? a you sure?
wich JB that you use? xxls2 or xxls7?
Sent from my GT-N7000
========================
Rom:
Leaked JB 4.1.2
Kernel:
Philz 2.7
========================
Yiannis75 said:
Sorry man i install xxls2 speedmod karnel and jb works perfect i mean about the S Note.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
If you are using speedmod kernel on jb, your note well never start. You need phils jb kernel.
Sent from my GT-N7000 using xda premium
triangle
hi guys i'm new on this forum,
i installed the leaked jelly bean rom on my note using odin (4.1.1) and it work very well.
Then i installed the kernel phil....etc... and it also works well but i just have the yellow triangle on my boot screen and i cannot remove it because i'm not root
any solution?
chiefs aanhist
dknight2000 said:
hi guys i'm new on this forum,
i installed the leaked jelly bean rom on my note using odin (4.1.1) and it work very well.
Then i installed the kernel phil....etc... and it also works well but i just have the yellow triangle on my boot screen and i cannot remove it because i'm not root
any solution?
Click to expand...
Click to collapse
UPDATE
I totally bricked my note: i installed hydracore 5.4 and after this my note bricked. I can actually go in download mode but everytime i try to install via odin the leaked jb rom it crashes while loading
Install an ics rom
Sent from my GT-N7000 using xda app-developers app
dknight2000 said:
UPDATE
I totally bricked my note: i installed hydracore 5.4 and after this my note bricked. I can actually go in download mode but everytime i try to install via odin the leaked jb rom it crashes while loading
Click to expand...
Click to collapse
UPDATE 2
I unbricked my note, now i'm with the stock ICS 4.0.4 and notecore kernel 14 and root access, but the counter is at 12 atm and the triangle away doesn't want to run. If i try to reinstall via odin the leaked jb 4.1.1 it crashes and so i have to reinstall ICS 4.0.4 again. Now what i have to do to install leaked jb 411? (the first time, ics404notecore14 was easy, just odin and the rom jb411).
Thanks
dknight2000 said:
UPDATE 2
I unbricked my note, now i'm with the stock ICS 4.0.4 and notecore kernel 14 and root access, but the counter is at 12 atm and the triangle away doesn't want to run. If i try to reinstall via odin the leaked jb 4.1.1 it crashes and so i have to reinstall ICS 4.0.4 again. Now what i have to do to install leaked jb 411? (the first time, ics404notecore14 was easy, just odin and the rom jb411).
Thanks
Click to expand...
Click to collapse
make sure you have full root, triangle away should work if you have root..
if you on notecore kernel, thats mean you have CWM.
download rom from this link http://forum.xda-developers.com/showthread.php?p=33225786
install via CWM..
See this video..
http://www.youtube.com/watch?v=TxohEy4HeXM&feature=g-user-u
Sent from my GT-N7000
========================
Rom:
Leaked JB 4.1.2
Kernel:
Philz 2.7
========================
zai89 said:
make sure you have full root, triangle away should work if you have root..
if you on notecore kernel, thats mean you have CWM.
download rom from this link http://forum.xda-developers.com/showthread.php?p=33225786
install via CWM..
See this video..
http://www.youtube.com/watch?v=TxohEy4HeXM&feature=g-user-u
Sent from my GT-N7000
========================
Rom:
Leaked JB 4.1.2
Kernel:
Philz 2.7
========================
Click to expand...
Click to collapse
OK i followed the instructions on this video and downloaded the rom you linked before. In CWM I did the 3 wipes (same as the video) and then i clicked on install xxls7.....etc.zip
I waited a long time and now all i can say is that I REALLY ****IN' LOVE YOU MAN!!!!!!!
dknight2000 said:
OK i followed the instructions on this video and downloaded the rom you linked before. In CWM I did the 3 wipes (same as the video) and then i clicked on install xxls7.....etc.zip
I waited a long time and now all i can say is that I REALLY ****IN' LOVE YOU MAN!!!!!!!
Click to expand...
Click to collapse
no need to love me, just click Thanks button..
its better to read every pages on that tread..enjoy you JB
Sent from my GT-N7000
========================
Rom:
Leaked JB 4.1.2
Kernel:
Philz 2.7
========================
dknight2000 said:
hi guys i'm new on this forum,
i installed the leaked jelly bean rom on my note using odin (4.1.1) and it work very well.
Then i installed the kernel phil....etc... and it also works well but i just have the yellow triangle on my boot screen and i cannot remove it because i'm not root
any solution?
Click to expand...
Click to collapse
Root,then Triange away...
Hello forum users
can anyone share a recent lag fix for my i9000 please?
i rooted my device and i have got Busybox 1.17.1
kindly regards,
stepan12
Hey,
First update your busybox, and if you doesn't matter, I would recommend you to change to a custom Rom. I'm from the i9001 but I'm sure that in the development forum of the s1 are a lot of tweaks for GB. If not look into the i9001 forum
Sent from the Internet
android_smiley said:
Hey,
First update your busybox, and if you doesn't matter, I would recommend you to change to a custom Rom. I'm from the i9001 but I'm sure that in the development forum of the s1 are a lot of tweaks for GB. If not look into the i9001 forum
Sent from the Internet
Click to expand...
Click to collapse
i dont want a custom rom i just want a lag fix..
For my experience, stock ROM sucks and always lag. Ever since I updated mine to Supernexus 2.0 M1 ROM, my phone is just as stable as Nexus 4.
No joke. Do it to believe. If you don't wanna do, then hard reset your phone and format the entire drive. Should be pack with a lot temp files and caches.
Sent from my GT-I9000 w/ Supernexus M1 rom using xda app-developers app
kickurasss said:
For my experience, stock ROM sucks and always lag. Ever since I updated mine to Supernexus 2.0 M1 ROM, my phone is just as stable as Nexus 4.
No joke. Do it to believe. If you don't wanna do, then hard reset your phone and format the entire drive. Should be pack with a lot temp files and caches.
Sent from my GT-I9000 w/ Supernexus M1 rom using xda app-developers app
Click to expand...
Click to collapse
which rom has a lag fix? and if i install is my device the same? i mean the theme etc etc..?
You don't need to install a custom rom. Speedmod kernel should be what you're looking for.
http://forum.xda-developers.com/showthread.php?t=1044519
Sent from my GT-P7510
stepan12 said:
i dont want a custom rom i just want a lag fix..
Click to expand...
Click to collapse
U didn't read everything what i wrote - i said that there are some tweaks that work on GB just open ur eyes! for GB i can recommend wolfscript, look in the i9001 forum
Sent from the Internet
Soryuu said:
You don't need to install a custom rom. Speedmod kernel should be what you're looking for.
http://forum.xda-developers.com/showthread.php?t=1044519
Sent from my GT-P7510
Click to expand...
Click to collapse
thanks i was looking for that
Soryuu said:
You don't need to install a custom rom. Speedmod kernel should be what you're looking for.
http://forum.xda-developers.com/showthread.php?t=1044519
Sent from my GT-P7510
Click to expand...
Click to collapse
benchmark score (1300+)
i expected no lag while i play some games :/
same **** as before
any suggestions?
Hi there everybody
first of all i wanna thank you for this amazing Site and Forum.....i really like it and appreciate your efforts here
so my story is simple.....
as you all know that JB 4.1.2 is out for a while now.....but in my country it's not available until now so i decided to update manually
and it work really.....i used the 4.1.2 XXLQG version (don't now if this is the most stable or not)
but after updating my mobile is lagging like hell and freezes when running a game or any heavy apps
so i don't know what to do???.....is this ver of JB not Stable or something??....
if there is any whay to help me it'll be great....
thank You all
Did u factory reset and wipe cache after upgrading? If not do it. LQG is good. Flash CoCore E 7.2 kernel and feel the smoothness.
Sent from my GT-I9070 using xda premium
phyowaiummg said:
Did u factory reset and wipe cache after upgrading? If not do it. LQG is good. Flash CoCore E 7.2 kernel and feel the smoothness.
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
thanks alot for the reply.....but i'm abit of a noob at android can you tell me how to do that
ok i've done the first step but what is (Flash CoCore E 7.2 kernel ) ?
sorry but like i said i'm new to android
totta_fadil said:
thanks alot for the reply.....but i'm abit of a noob at android can you tell me how to do that
ok i've done the first step but what is (Flash CoCore E 7.2 kernel ) ?
sorry but like i said i'm new to android
Click to expand...
Click to collapse
Root your JB and use universal kernel flash app to update to cocore 7.2. It is an zip you can unpack and use the bin file in the ukf app, then reboot
Sent from my GT-I9070 using xda app-developers app
Phoneboot said:
Root your JB and use universal kernel flash app to update to cocore 7.2. It is an zip you can unpack and use the bin file in the ukf app, then reboot
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
so i need to root my device?
is it dangerous?
and the steps....is it here in the forum?
and also what is the advantage of "this" (cocore7.2)
Use this guide for all...
http://forum.xda-developers.com/showthread.php?t=2198341
Sent from my CM10.1
R_a_z_v_a_n said:
Use this guide for all...
http://forum.xda-developers.com/showthread.php?t=2198341
Sent from my CM10.1
Click to expand...
Click to collapse
thanks alot guys for the help.....it works fine now
just another question not related to this post
can i now (my phone is rooted).......put games data in my Sd card
I cant flash SGA XXLQG
phyowaiummg said:
Did u factory reset and wipe cache after upgrading? If not do it. LQG is good. Flash CoCore E 7.2 kernel and feel the smoothness.
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Hello,
I was trying to flash CoCore E 7.2 in recovery, but after start, there was a problem and there was sign: signature verification failed.
I have installed XXLQG on SGA, and i isnt work corrcetly, there are lags, it is really slowly and i am crazy of starting contact book and dialer. It takes 3 or 4 sec.
I dont know if flash repair it, i dont know. And I dont know why I cant flash CoCore E, CoCore + TWRP. Can anybody help me? I need faster phone.
Thanks
Root your phone first.
And dialer lag its a known bug. Use exDialer from market.
Powered by CM10.1
R_a_z_v_a_n said:
Root your phone first.
Powered by CM10.1
Click to expand...
Click to collapse
It is rooted. Why I cant flash kernel?
Sig verification is on stock recovery. Unzip kernel file and flash kernel md5 file using universal kernel flasher.
Sent from my SGS Adv. using xda-developers app.
th3cr0w said:
Sig verification is on stock recovery. Unzip kernel file and flash kernel md5 file using universal kernel flasher.
Sent from my SGS Adv. using xda-developers app.
Click to expand...
Click to collapse
It is ok now, thanks, for your help
what do you mean by ok
tino26 said:
It is ok now, thanks, for your help
Click to expand...
Click to collapse
what do you mean by ok?
Were you able to update the kernel?
After updating kernel is the phone working fast and normal? Is the dialer lag gone?
What is your current kernel then?
and
What is your current ROM?
You also have to disable signature verification in recovery mode, That should do the trick.
Sent from my GT-I9070 using xda app-developers app
Name your current KERNEL & ROM please
totta_fadil said:
thanks alot guys for the help.....it works fine now
just another question not related to this post
can i now (my phone is rooted).......put games data in my Sd card
Click to expand...
Click to collapse
Could you tell me what your current KERNEL is?
Could you tell me what your current ROM is?
Everything running smooth with this combination?
tino26 said:
It is rooted. Why I cant flash kernel?
Click to expand...
Click to collapse
Delete
phyowaiummg said:
Did u factory reset and wipe cache after upgrading? If not do it. LQG is good. Flash CoCore E 7.2 kernel and feel the smoothness.
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
I have I9070JVMD1 and stock kernel.
It lags a lot especially the dialer.
also, while playing long video the device goes into coma - I mean it becomes non-responsive.
If I flash CoCore 7.2 kernel should I get rid of the lags?
Nishad1982 said:
I have I9070JVMD1 and stock kernel.
It lags a lot especially the dialer.
also, while playing long video the device goes into coma - I mean it becomes non-responsive.
If I flash CoCore 7.2 kernel should I get rid of the lags?
Click to expand...
Click to collapse
If you flashed the kernel, the lags won't magically disappear but it is considerably reduced because the lags in dialer/camera/contacts are samsung's fault.
Sent from my GT-I9070 using xda app-developers app
tino26 said:
It is rooted. Why I cant flash kernel?
Click to expand...
Click to collapse
-Deleted-
Nishad1982 said:
what do you mean by ok?
Were you able to update the kernel?
After updating kernel is the phone working fast and normal? Is the dialer lag gone?
What is your current kernel then?
and
What is your current ROM?
Click to expand...
Click to collapse
I´ve updated kerner with universal kelner flasher. Yes phone is faster and i am using exdialer. It is better than original samsung dialer, mainly faster.
I´m using CoCore E 7.5 and XXLQG.