I recently picked up the SupCase Slim Fit Leather case for the Nexus 7, and this is my review.
Build Quality: The case is pretty well made. It's not the most well constructed leather case, but it's made well enough. The stitching is alright with a few quirks here and there. It's also not genuine leather if you couldn't already tell. It's like a rubbery and synthetic like material wrapped in a leather wrapping. Despite not being genuine, the leather does look and feel nice.
Cutouts: No issues here really. SupCase did a really nice job with this case, it offers near perfect cutouts for all ports and buttons. I had no issues accessing anything.
Design: The Slim Fit Leather Case is a folio-style case, or book-like if you will. You need to slip your Nexus 7 inside and tuck a flap underneath. The flap is held nicely with velcro so it's very secure. The fit and alignment of the Nexus is also good inside the case. I did notice at times that because there is a frame that surrounds the tablets bezel, it would sometimes hinder accessing things at the top, bottom, and sides of the screen. You just need to sort of work around it, but it is definitely something to keep note of. The case also incorporates a stand. You prop it up by taking the front flap and tucking it underneath the holder on the back of the case. This gives you two stand options: a keyboard typing angle, and an upright viewing angle for videos and other media consumption.
Sleep/Wake: The case has embedded magnets that turn the Nexus 7 on/off. Not ON/OFF literally, but it awakes it and puts it to sleep. The magnet also keeps the front flap closed as well to prevent it from flopping around. The magnets are just strong enough to perform the sleep/wake and keep shut. I have also not noticed the front flap turning the Nexus to sleep when folded all the way back.
Overall, I can highly recommend the SupCase Slim Fit Leather case for the Nexus 7. It offers nice style, protection, precise cutouts, and decent functionality. Moreover, it's only $15!
View my high res pics of the case below. I'd also appreciate it if you can thank me if this review helped you out.
You can purchase the case here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looks like the same as my CaseCrown Bold (I went with black, on sale at amazon.com for $5.21). The material is what they call PU leather, a faux leather.
I purchased this a while back as my first case. I chose the dark maroon/purple one. I like it, but I think the stand is a little weak; it flops over pretty easily. I think I only paid $12ish so it wasn't a bad choice for my first case, but I'm definitely looking into one that doesn't cover the bezel. Good review!
A lot of cases like that for less.
BTW.. you can have a link to the product without all that extra stuff (like the referral code)
www.amazon.com/dp/B008HDLI9Y
LovelyLush said:
I purchased this a while back as my first case. I chose the dark maroon/purple one. I like it, but I think the stand is a little weak; it flops over pretty easily. I think I only paid $12ish so it wasn't a bad choice for my first case, but I'm definitely looking into one that doesn't cover the bezel. Good review!
Click to expand...
Click to collapse
Yea, the stand doesn't work too well when upright. It usually only works well for me on a hard surface.
Sent from my Nexus 7 using Tapatalk 2
I like the case as well. However in the tall stand mode (for watching movies, etc.) it can be a bit unstable.
krelvinaz said:
A lot of cases like that for less.
BTW.. you can have a link to the product without all that extra stuff (like the referral code)
www.amazon.com/dp/B008HDLI9Y
Click to expand...
Click to collapse
sneaky, sneaky.
Choose the deep blue color!
Thank you!
Bought the deep blue one!
LBLB1234 said:
Thank you!
Bought the deep blue one!
Click to expand...
Click to collapse
Did you get your case? :laugh:
I got my case! It is a nice product.
spade56 said:
Did you get your case? :laugh:
Click to expand...
Click to collapse
LBLB1234 said:
I got my case! It is a nice product.
Click to expand...
Click to collapse
Which color did you pick?
Perfect case for the Nexus 7. I was a bit skeptical at first, I've bought cases for many electronics and they usually end up disappointing. The Nexus fits snugly in the case, like a good set of driving gloves. The case has cutouts for microUSB, microphones, power button, volume rocker, rear speaker, camera, light sensor and headset jack. It adds minor weight to the Nexus. It comes with a magnet on the front cover, which auto wakes and sleeps Nexus. Overall feels like a quality item for the price, recommend to anyone looking for a Nexus case.
I got my in white. Just want to share the pics. It's pretty awesome.
Wow this looks really nice. I Think ill buy this one. Thank you for Review
I hate the design. It covers the edge of the screen and it makes it hard to navigate. And its uncomfortable to hold. Not worth it.
I recently bought a Nexus 7, and then when it became available one of these cases. I normally do not bother to write reviews, but was so pleased by the product and price am glad to do so now. The design is excellent, as is the quality. According to my friend (who knows about these things) it is indeed nicely done leather. It does a very good job of protecting the device, cunningly folds to make a handy stand, and I find all the controls and ports to be completely accessible. Especially considering the price, what's not to love?
It's personal preference I guess, for me I have no problem with navigating or holding the device. Only one con would be the kickstand, you can only stand it in one angle. Other than that this case is perfect for me.
Sent from my Nexus 7 using XDA Premium HD app
The white looks great. I just bought the white one for my backup case.
Thanks!
Anon1992 said:
I got my in white. Just want to share the pics. It's pretty awesome.
Click to expand...
Click to collapse
Anon1992 said:
It's personal preference I guess, for me I have no problem with navigating or holding the device. Only one con would be the kickstand, you can only stand it in one angle. Other than that this case is perfect for me.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
I have another case with muti angle, however, I still like this slim fit one.
Thanks for your reply
goofball2k said:
Looks like the same as my CaseCrown Bold (I went with black, on sale at amazon.com for $5.21). The material is what they call PU leather, a faux leather.
Click to expand...
Click to collapse
This case is so nice
Related
Just got my Rearth Ringke case for the Nexus S.
Aqua Black in color which is transparent.
Background: I purchased the Best Buy Platinum Series Combo Case (rebranded Seidio Innocase Surface) when I first bought my Nexus S on release date Dec. 16, 2010.
Unfortunately because of the curvature of the Nexus S, this case isn't as high quality as Seidio's previous Innocases for other phones. I've stopped using it and only use the Sprint-Clip Holster along with other cases. Here is my post (just pictures) about the Platinum/Seidio case: http://forum.xda-developers.com/showthread.php?t=875231
In looking for other cases, I purchased a really cheap TPU style case on eBay, and have been using it. I'm ok with it, but there are some issues that I do not like (volume/power buttons are flush and hard to push/find).
Review: Received the Rearth Ringke case today for my Nexus s.
Packaging was great. Sturdy box, mailed from Louisiana. The actual packaging for the case is nice too.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm not sure if it's because of the transparent color/material, but it's very silicone like, and very squishy. The eBay TPU case I have was very hard.
It's easy to put the phone in the case, but because of how "squishy" it is, once you get the phone in, it is not perfecly in. You'll need to move it around and adjust the case and line up the camera/flash/speaker holes. My eBay TPU case, once I put the phone in, it fits perfectly in and no adjustments needed. I've only had this Ringke case today, so I will see how it lasts for the next few days and see if in the normal use of my phone if the case will move around and misalign.
So how does it feel? To me it feels pretty good. It's very thin and has some kind of texture in it. I've read others saying it's slippery and offers no grip. I disagree. There is a matte sort of feeling and it's not slippery at all.
You can see in some of the pictures, the Ringke logo is on top of the Samsung logo, visible in the transparent Black Ash colored case. This doesn't matter in the solid non transparent colors, but in this particular case, I would have prefered if they moved the Ringke logo up a bit as to not block the Samsung logo.
I noticed on the power button, there is a picture of a power icon. Nice touch but not sure if it's necessary since it's almost impossible to see. (The actual Nexus S does have a power icon on the power button, that's probably why they did it).
A huge plus with this case vs other TPU cases, the Power button/Volume control actually works! They stick out a bit and you can actually feel the buttons and press it with a nice feel and the buttons work!
I like the little indentation above the speaker hole, the raised edges around the camera hole, and the little notches above the FFC and Light Sensors. You can tell they did some design work on the case to make it a little different.
Also, the phone with the Ringke Case fits my Platinum Series Spring Clip Holster. That is a major plus.
All in all, this is a very nice case. Steps above cheap HK eBay cases. The price is line with similar style (non eBay) cases.
More Pictures:
Does the case feel like it will start rubbing off? Like rubber cases that if you slide in and out of jeans pockets will start to peel and whatnot.
Sent from my Nexus S
wyaeiga said:
Does the case feel like it will start rubbing off? Like rubber cases that if you slide in and out of jeans pockets will start to peel and whatnot.
Sent from my Nexus S
Click to expand...
Click to collapse
Nah. It's not coated in rubber, no it doesn't feel/look like it'll wear off.
Sent from my Nexus S
Very Happy with this case, good texture, very good fit. It protects enough for the everyday normal usage and very occasional drops (don't tell me you never drop things...). I got the black one.
I ordered a tougher one for when I do all my crazy cycling, climbing, travelling, running, hiking, etc... so it can safely take a few more higher&tougher impacts.
nxt said:
Nah. It's not coated in rubber, no it doesn't feel/look like it'll wear off.
Sent from my Nexus S
Click to expand...
Click to collapse
The matte texture is actually rubbing off for me around the edges. Makes it a bit shinnier and stickier around the edges.
Sent from my Nexus S using XDA App
I got this case pretty neat will review soon
Can you tell me if the case can be bought in stores in the US?
My brother is currently in the US and I'd ask him to bring me one along ...
I have both ...both great case minimal bulk added and love the back finish doesn't collect sweat/.fingerprints
the plus on the Rearth Ringke is the buttons they seem to stick out so easier to find were the case on the right they dont.
And the cut outs are slightly better
But the case on the right has a glossy finish on the front and IMO looks better like the phone has no case on
Both are great cases TPU is much better than silicone cases that get sweaty and lose shape after a while
here is a vid review also
http://www.youtube.com/watch?v=Yo9swPPpDVU
Any hints on where to get it?
All usable colors seem to be out of stock on their website.
DerSeppel said:
Any hints on where to get it?
All usable colors seem to be out of stock on their website.
Click to expand...
Click to collapse
I had wanted a black, but settled for an aqua black just a couple weeks ago from their website. Seems all they have left are colors other than black:
http://www.rearthusa.com/Nexus-S-Nexus-S-4G_p_160.html
I was able to find one or two other retailers via Google Shopping, but their price was the best (with free shipping). I was impressed. It was basically next day from LA to CA (although YMMV).
Also, I wanted to add, I have a Casemate Pop, Seido Active X, and this case. The Ringke is my favorite out of all of them thus far.
As far as the feel of it is, I liken it to the feel of the Nexus One's Teflon exterior.
I just bought two of these for my girlfriend and myself (i9020T) and we're both very happy with it. Sticks well to the phone, not too heavy/bulky and looks good. My only gripe with it is that the Black is not really that black in person like it is in the promo pictures
mageyb said:
I just bought two of these for my girlfriend and myself (i9020T) and we're both very happy with it. Sticks well to the phone, not too heavy/bulky and looks good. My only gripe with it is that the Black is not really that black in person like it is in the promo pictures
Click to expand...
Click to collapse
Did you get black or aqua black? Black has been out of stock which might explain the discrepancy you're seeing
Sent from my Nexus S 4G
DerSeppel said:
Any hints on where to get it?
All usable colors seem to be out of stock on their website.
Click to expand...
Click to collapse
um.. no they aren't?
http://www.rearthusa.com/Nexus-S-Nexus-S-4G_p_160.html
Man the case look to bulky for my taste, is there a superthin case anywhere?
Or am i stuck with my pouch?
Linus82 said:
Man the case look to bulky for my taste, is there a superthin case anywhere?
Or am i stuck with my pouch?
Click to expand...
Click to collapse
Only thing thinner is the Incipio Feather case. But it's not going to offer the same degree of protection.
Sent from my Nexus S using Tapatalk
i wish they came with a clear case!. i bought a white nexus s, and would love to see the white beneath the case lol. the clear cases i've found look cheap and bulky. but i did find a really good case, i am rockin Proporta's Mizu Shell in charcoal. Has a great feel and fit to it but again, i wish it was clear, as it only comes in charcoal. anyone know a good clear and slim case?
Thanks for the review! Once I had found out OtterBox wasn't releasing one for the Nexus S I couldn't decide between this and the Ultra Silke. I Ordered the Rearth one after reading this review. Only wish they had Black in stock, and quicker shipping to Canada..
Does this case make it hard for you to access the phone in your pockets? I bought a silicone one it was really hard to put it in and take it out of the pockets.
I usually wear jeans...
This looks like exactly what I want. Thanks for the thorough review.
I hate the cases that cover the bezel and basically leave only the screen viewable. I find they add bulk, get in the way of your fingers sometimes, etc. This is the thread for cases that don't do this. Preferably these cases have only 2-3 "layers." A lid (or not), the tablet, then the back, and the holding mechanism is typically kind of invisible or unobtrusive. I find it's generally the fourth layer in the middle that goes on top of the bezel or on the back where there's a rotation mechanism that adds the unneeded bulk. Hopefully these cases still allow you to pocket your N7. Personally I'd love some kind of TPU case with a kickstand, but no luck so far.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.amazon.com/MoKo-Automati...4?s=electronics&ie=UTF8&qid=1344274935&sr=1-4 (stylus loop and hand sleeve)
http://www.amazon.com/Blurex-Ultra-...2?s=electronics&ie=UTF8&qid=1344274912&sr=1-2
http://www.amazon.com/i-Blason-Slee...N0NS/ref=sr_1_3?ie=UTF8&qid=1344275193&sr=8-3 (color choices)
http://www.amazon.com/KaysCase-Slim...?s=electronics&ie=UTF8&qid=1344275049&sr=1-47 (this one is different than the previous three) (color choices)
So far these are all basically Folio cases.
All those case are exactly the same except for the Kay's. Theres a few different ones one ebay too. Im waiting for a nice slim case too, one like the poetic smart case.
http://www.amazon.com/gp/product/B008IEGS9W/ref=ox_sc_act_title_4?ie=UTF8&smid=A29LLD0WGS56WE
This poetic case differs slightly as it has a hand grip and elastic strap to hold the case closed.
I wonder how it compares to the kayscase one you posted (particularly how the stand holds up to slight shaking on airplanes)
Sent from my Nexus 7 using Tapatalk 2
what about this one??
http://www.amazon.co.uk/Poetic-Port...TQ/ref=sr_1_22?ie=UTF8&qid=1344281928&sr=8-22
ragmanchu said:
what about this one??
http://www.amazon.co.uk/Poetic-Port...TQ/ref=sr_1_22?ie=UTF8&qid=1344281928&sr=8-22
Click to expand...
Click to collapse
I've been looking at that one myself, nice and slim but too expensive for what it is at £24 inc del (ignoring the vastly over-inflated 'original' price it was never sold at). I'll wait and see what price it ends up being sold for.
I have the top one listed. The black. Works good. Adds quite a bit of thickness but comes off easy. I think I'll use it to snap on when I leave the house and run nekkid when at home.
The Smart Cover works very well and doesn't turn the screen off when folded behind. I was wondering what that little lanyard loop was for, stylus. Good to know. Again it is nice that this case can just pop off whenever you need and not requiring any extra effort to get it off like a sleeve or a tight fit. The N7 is pretty snug in there but comes off with little effort.
I have the slim Poetic Smart Case on order. I like a thin profile. So far I've tried a TPU case and this one. As long as the Poetic doesn't have some major flaw, I'll probably switch to that once I get it. Sure it's $20 but I spent $30 for my Ringke Slim for my Galaxy Nexus.
I have this one, which I just posted a review about, with pics:
http://www.amazon.com/gp/product/B007S9ZSGW/ref=oh_details_o06_s00_i00
My post:
http://forum.xda-developers.com/showthread.php?t=1818755
I prefer the cases which allow the 360 degree rotation, so those will be a bit bulkier. Don't mind it though since I prefer the versatility over the slight bulkiness.
neotekz said:
All those case are exactly the same except for the Kay's. Theres a few different ones one ebay too. Im waiting for a nice slim case too, one like the poetic smart case.
Click to expand...
Click to collapse
There are a few minor differences hence multiple links. Some are different prices, some will be out of stock, some have a stylus loop, some come in different colors, some have a differently designed speaker cutout, etc. So I didn't feel it was redundant.
Remove all Amazon referrer links.
The official case doesn't really cover much bezel
*expects to get flamed*
Sent from my Galaxy Nexus using Tapatalk 2
For a book reader like myself, the official cover is great and doesn't really cover the bezel, and its still able to maintain a relatively thin profile.
Sent from my Nexus 7 using xda app-developers app
any reviews on the i-blason one. i'm tempted to buy but am very stingy with my money ha
These cases look great, especially the Kays. Unfortunately, they don't ship to Australia.
I'm considering just buying the Asus case and adding a magnet.
Sent from my Nexus 7 using XDA Premium HD app
I agree. I was hoping for a thread like this to pop up thank goodness
I also hate bezel covering cases. Hopefully more pop up.
I'd waiting on a nexus 7 version of http://www.incipio.com/BlackBerry-PlayBook-Cases-Accessories/Incipio-BlackBerry-PlayBook-Executive-Premium-KICKSTAND-Leather-Case.asp
Waiting for the MoKo to come out with more colors! Love this style but it would be perfect if it had a kickstand in the back for portrait mode. Not sure why anyone hasn't made one like that yet.
Please keep this thread updated! I'm still holding out on buying a new case until I find one that's just what I want (I already have a cheapo case protecting my N7 for the time being). Thanks!
I would like something that doesn't snap over the back cover but replaces it similar to what the galaxy note has since the back just snaps off. Here is an example of a very ugly one I can't find the matte black or white ones with a quick google search but they exist link. The only addition I would like to see is the tri fold front cover with magnet to make it a smart cover like this case. If the case had the same outside texture as the stock back that would be a bonus as well. I doubt we will get one though.
I have the poetic case ams and it works quite well.
It's still thin and pocketable while offering great protection due to the sturdy front cover.
Sent from my Nexus 7 using xda premium
The colored i-Blason cases seem to cover half of the speaker. Anyone own one of these? I'm thinking about getting the blue one. I'd like to know if this is a problem.
saw this in another thread from R3dbeaver
http://forum.xda-developers.com/showthread.php?t=1823702
http://www.ebay.ca/itm/221095819899?var=520103808876&ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_3125wt_1143
http://www.ebay.com/itm/15088047618.../sch/i.html?_sacat=0&_nkw=150880476182&_rdc=1
I ordered the case on 20th August and it arrived yesterday 31st so not bad from HK to the UK signed for delivery.
The case is very slim, in one of the pics I've included a 5 pence piece for comparison, the case is almost exactly the same thickness as the coin at about 18mm closed.
It looks very smart and the chrome strip for the magnetic closure looks better than I'd expected. The case section is hard plastic like many others and has a soft neoprene style backing to it. The N7 clips in very securely (I've yet to figure out how to get it out again...) and is protected all round. All the cutouts are in the right place and nicely bevelled, the on/off switch and vol controls have their own cutouts which makes finding them easier than my previous case,
In the open stand position the nap of the cloth interior holds the N7 at the angle you want, nice touch. No auto on/off magnet, but that's just a lazy mans gimmick anyway and doesn't bother me as long as the switch is easy to get to. You can see in the second picture the speaker grill and the PU material the 'hinge' strap is made from, because of the way it's made there's a bit of rotational play to the cover when closed but not too much, time will tell if that increases or not.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for the review
Is it possible to fold the cover back completely, how does it look?
Yes it is possible, the cover folds back flat and stays flat without any pressure.
even cheaper
Found a cheaper one from the ausies for $13.4 - http://www.ebay.com/itm/ULTRA-SLIM-...ccessories&hash=item46078371f9#ht_6402wt_1194
It comes without the metallic Nexus7 part, I prefer this version.
I'd like to hear the OP thinks based on the photos, is this the same product or a cheaper/inferior replica?
Beautyfull
karaya said:
Found a cheaper one from the ausies for $13.4 - http://www.ebay.com/itm/ULTRA-SLIM-...ccessories&hash=item46078371f9#ht_6402wt_1194
It comes without the metallic Nexus7 part, I prefer this version.
I'd like to hear the OP thinks based on the photos, is this the same product or a cheaper/inferior replica?
Click to expand...
Click to collapse
Looks pretty much the same, except without the chrome strip as you say. the magnet is built in to the case so I assume there must be some metal strip in the cover to keep it shut. Auction doesn't give any details though.
karaya said:
Found a cheaper one from the ausies for $13.4
It comes without the metallic Nexus7 part, I prefer this version.
I'd like to hear the OP thinks based on the photos, is this the same product or a cheaper/inferior replica?
Click to expand...
Click to collapse
I asked the ebay seller. I am afraid that the metallic label and the magnet are missing from this case. I cannot understand how it remains closed.
akism said:
I asked the ebay seller. I am afraid that the metallic label and the magnet are missing from this case. I cannot understand how it remains closed.
Click to expand...
Click to collapse
hhmm, maybe that's why it's cheaper? or maybe there is a metal insert inside the cover that connects with the magnet.
I just got mine in today and I actually like it a lot. It has a nice soft leather feeling in hand and the plastic back feels quite sturdy. The tablet really clicks into the back solidly, it actually takes some work to remove it from the case. The construction is pretty nice, it has the felt on the inside of the lid and the plastic, the cutouts are nice (especially the separate power button) and the magnet holds it closed firmly.
The downsides are minor, the lid is a little oversized and doesn't lock into place when closed. It can wiggle and twist around some. Other then that it looks nice and feels nice, it compliments my bulkier Portenzo case well
I've found a good use for the chrome N7 strip, I bought an Appldea Maglus stylus and it has a strong magnet in it which holds it onto the metal very securely.
Troute said:
hhmm, maybe that's why it's cheaper? or maybe there is a metal insert inside the cover that connects with the magnet.
Click to expand...
Click to collapse
Confirmed: There is no magnet in this cheaper version.
Is anyone concerned about that metal strip contacting the screen and scratching it? Looks like a nice case though. Thanks for the review and pics.
very nice review. may consider getting one of these!
JB426 said:
Is anyone concerned about that metal strip contacting the screen and scratching it? Looks like a nice case though. Thanks for the review and pics.
Click to expand...
Click to collapse
No. the magnet in the base is slightly raised so the chrome strip does not come into contact with the screen when closed. Use a screen protector anyway, they are so cheap it's daft not to.
JB426 said:
Is anyone concerned about that metal strip contacting the screen and scratching it? Looks like a nice case though. Thanks for the review and pics.
Click to expand...
Click to collapse
Will not contacting the screen and scratching ，confirmed
I have this case as well, though I haven't written a review on it. My recommendation: DO NOT BUY.
First off, the biggest miss in this case is no sleep/wake magnet. On top of that, its difficult using the case as a stand for the tablet. Although the cover looks and feels good (almost like leather), $20 is way too expensive for something that is lacking a smart-cover feature, a mechanism to use it as a stand, and fake leather.
theomni said:
I have this case as well, though I haven't written a review on it. My recommendation: DO NOT BUY.
First off, the biggest miss in this case is no sleep/wake magnet. On top of that, its difficult using the case as a stand for the tablet. Although the cover looks and feels good (almost like leather), $20 is way too expensive for something that is lacking a smart-cover feature, a mechanism to use it as a stand, and fake leather.
Click to expand...
Click to collapse
I have to disagree, Asus/Google very kindly provided us with an on/off button and I don't mind using it, I don't need a 2 cent magnet to do the job for me. I've also not had any problem using the case as a stand when I've wanted to, as explained above the nap of the cloth interior holds it nicely for me.
$20 is at the top of the cheaper end of the range but it's hardly bank robbery, I've bought a number of cheaper cases and all of them do the job to a greater or lesser extent but all of them look cheap compared to this one.
Each to their own though, ymmv etc. the world would be a dull place if we all thought the same.
Troute said:
I have to disagree, Asus/Google very kindly provided us with an on/off button and I don't mind using it, I don't need a 2 cent magnet to do the job for me. I've also not had any problem using the case as a stand when I've wanted to, as explained above the nap of the cloth interior holds it nicely for me.
$20 is at the top of the cheaper end of the range but it's hardly bank robbery, I've bought a number of cheaper cases and all of them do the job to a greater or lesser extent but all of them look cheap compared to this one.
Each to their own though, ymmv etc. the world would be a dull place if we all thought the same.
Click to expand...
Click to collapse
agree，that is not real leather case 。but feels good in hands and nice looking，smooth ，No offensive smell
Troute said:
No. the magnet in the base is slightly raised so the chrome strip does not come into contact with the screen when closed. Use a screen protector anyway, they are so cheap it's daft not to.
Click to expand...
Click to collapse
surprise123 said:
Will not contacting the screen and scratching ，confirmed
Click to expand...
Click to collapse
Cool thanks guys, that's good to know.
Looks good.
Sent from my Nexus 7 using XDA Premium HD app
I really like these cases.
Here are some pictures (sorry, I took them in low light with the Galaxy S3):
I got the black and white cases, I personally like the white one more, but the black is also nice.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The case is very sturdy and very nice to the touch. It's kind of slippery, but it feels fine in the hand.
It doesn't hinder the Spen. I've had other cases for this note, and the original, and the Spen on some cases were impossible to take out
Buttons are easily accessible and they're raised! FINALLY! They're easy and clicky! Also, it has a charm loop or a lanyard loop.
Here are some pics of the black one
The cases are easy to apply and the phone basically snaps on, it's not a tight tight fit, but it's not going to come out on its own. It's snug in there, but you don't feel bad having to press really hard or anything like that to get the case off. It basically just comes out with ease.
These cases are going to be my daily drivers for a while, until something better comes along. I usually like Samsung cases. I love the S3 cases and now the Note 2 cases. The only thing I wish it had was the silicon flap to cover the USB or the headphone jack (or both!) to not let any dust in.
Hit thanks if this review has helped you or you just like the pics Or if you'd like me to continue reviewing cases I buy .
Thanks for reading!
Regards,
ZKYEVOLVED
Update: I have been getting a lot of PMs about where I got the case. I finally ordered it from here: CLICK, 15 euros.
On another thread (this thread) I had found some ebay links, and then I found some stores
All you need to do is search for the model number of the one you're looking for:
Black case: EFC-1J9BBEG
White case: EFC-1J9BWE
Pink case: I don't remember sorry!
Hope I've helped!
UPDATE: Today is my birthday, and last night I went out with some friends and I used this case. Oh my... The dark photos were ... let's just say that they could be used for Paranormal Activity 10! The white case gives off a reflection! Check this out. I don't recommend the white case if you're going to take night time pictures with flash. Without flash the pictures were fine, but the white edges of the case reflect and kind of destroyed the pictures. The reflection kind of threw off the rest of the picture (exposure, white balance, not to mention the spirit appearing at the bottom of my picture)!
Thanks for posting so many pics. I just ordered one of the white ones today and feel more secure in my decision after seeing your post. I'm currently using one of the generic "folio" type cases off of Amazon and was looking for something that was less awkward to use while I wait for Otterbox to release the Commuter/Defender cases.
It's disappointing to hear the cases are a little slippery. I was hoping for quite a bit of grip improvement.
DeoreDX said:
It's disappointing to hear the cases are a little slippery. I was hoping for quite a bit of grip improvement.
Click to expand...
Click to collapse
The back plate is a slippery (and on the black, it's a fingerprint magnet, as you can see!) but the sides are rubber, and it won't slide out of your hand if you're holding the sides. But the back itself is slippery. It's plastic... Of course it is! It's SAMSUNG!
Dual Boot said:
Thanks for posting so many pics. I just ordered one of the white ones today and feel more secure in my decision after seeing your post. I'm currently using one of the generic "folio" type cases off of Amazon and was looking for something that was less awkward to use while I wait for Otterbox to release the Commuter/Defender cases.
Click to expand...
Click to collapse
I'm glad to have helped! I'm really content with the cases. You can tell that they've been made specifically for this phone. All the details are there for the ports and buttons. It is actually slimmer than my other TPU cases.
I'm not a fan of folio cases because I don't want to cover the LED Notification light, or when it's open cover the camera! They're probably two of the most important features about this phone for me.
get the bodyglove :good:
Looks like a winner so far.. still waiting for one to arrive. For now using the body glove case
Sent from my SGH-T889 using xda app-developers app
+1 for this case, got mine in the mail today..
thanks! just ordered the white one based on the pictures (especially since my white tpu case from asia is taking forever to get here).
hope this case isn't too thick. i need a tpu case for accidental drops, but with minimal added thickness.
chuhsi said:
thanks! just ordered the white one based on the pictures (especially since my white tpu case from asia is taking forever to get here).
hope this case isn't too thick. i need a tpu case for accidental drops, but with minimal added thickness.
Click to expand...
Click to collapse
It's not too thick. Hehe. Its on par with other tpu cases if not thinner. It's very well planned.
Sent from my GT-N7100 using Tapatalk 2
zkyevolved said:
It's not too thick. Hehe. Its on par with other tpu cases if not thinner. It's very well planned.
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
Looks good in them pics! I checked my tracking number and looks like my black case is waiting for me at home :good:
I might just wait for the T-Mo D3O cases before deciding but these cases look good. I was hoping the interior would be silicone or something like those Speck cases.
Thank You for the review!
uchosen said:
Looks good in them pics! I checked my tracking number and looks like my black case is waiting for me at home :good:
Click to expand...
Click to collapse
What day did you order yours?
Sent from my SPH-L900 using Tapatalk 2
Jocelyn said:
Thank You for the review!
What day did you order yours?
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
I ordered mine on the 25th and shipped out on the 27th. I'm in SoCal USA and it shipped from Dallas, TX.
Received and agree on all points. Fit is superb. Yeah, it's a little slippery on that glossy back piece but you're going to be gripping the rubbery sides so I wouldn't worry too much about it. Those raised plastic button covers on the sides for the volume and power are indeed nice and very assuring to the touch. It's not as thick as I thought it would be from seeing the pics.
Only con is it does add more weight than I would prefer but I feel more secure with the phone inside so I can deal with it.
My new favorite case over the Nilkin that exposed the top and bottom of the phone. :victory:
mine shipped today. I usually dont use cases, but i gotta say i loved the way the samsung cases looked on the GS3, looking so thin, i barely even noticed people had cases on them when i saw people pull them out. gotta love the samsung 50% off coupon too, ordered the tectiles and charging dock and battery. ( rE155266e coupon code)
I've received some PMs about where I got my cases from. It's a company here in Madrid. Their website is www.Octilus.com, they had the cheapest price I could find and their shipping was only 1€. I'm enjoying the cases highly recommended.
Sent from my GT-N7100 using Tapatalk 2
I was concerned about adding bulk to this sexy device, but I can safely say its a non-issue with this..
I got my black case yesterday and I'm very pleased with fit and finish. I don't think it's possible for a case to add less bulk and provide similar protection. The hard back does show finger prints and finger oil smears very clearly but no big deal and overall looks better than the T-mobile logo IMHO. Soft sides provide good grip and the charcoal gray color looks very good with the front bezels of titanium model. It didn't seem like a tight fit going on but doesn't seem loose in use. I imagine a little looseness is a good thing when it comes to shock adsorption and I believe the rubber sides will grip well enough to prevent the phone from separating during most falls. The edge surrounding the screen is raised enough to keep it from touching a flat surface when face down but just barely. I expect the screen could make contact if the phone is dropped on an irregular surface. I have a Spigen SGP Ultra Clear screen protector for that situation and highly recommend it as well. I can't even tell it's there from looks or function. Invisible to the eye and S-pen with cut outs for camera, proximity and light sensors as well as the speaker and home button. Feels like the native glass to finger and pen might actually feel better with a very very slight and benefitial increase in drag. So slight it may be imaginary.
,
Sent from my SGH-T889 using xda app-developers app
Got my white one today. Looks amazing. Now come on Verizon, send me my GN2!!! Getting the case is just a teaser!
Ordered the black for myself and white for the wife. Still waiting on them to get here, we usually only use Speck cases but since Speck has not came out with one yet These will have to do. Plus we got each of them for 50% off for registering our phones on the Samsung site.
Sent from my SGH-T889 using xda premium
Hi
Ordered my black case yesterday as it seems the only nice and simple case at this moment. Probably will get it middle of next week.
Thanks for all the pictures and comments, they confirm my choice
Sent from my GT-N7100 using xda app-developers app
I'm not that great at prose. Bullet points for all of you!
Bought from here. Also comes in white and red.
Notes:
The great big DANGER sticker and Big Scary Laser sticker is something I bought separately.
Pros:
It's 6 freaking dollars!
Does not feel cheap
Volume/power buttons retain their 'click'
Reasonable protection
High lip for drop protection
Lip does not impede touching the edge of the screen
Stand actually useful (comfortable angle)
Slippery enough to slide into my pocket, grippy enough to comfortably stay on a table
Does not attract fingerprints at all
Fit is very tight, phone absolutely won't come out on its own
Feels comfortably rugged but not ridiculously so
Would not be afraid to drop the phone whilst in the case
Cons:
Volume/power buttons have very little definition on the case, very easy to accidentally press volume down whilst holding the phone
Stylus cutout could be a tad bigger
Larger headphone connectors may not fit
Larger microUSB connectors may not fit
Can be a little fiddly to get the phone out of the case due to tight fit
Neutral:
Stand only has one angle (I like it for the simplicity, but each to their own)
Stand feels a little flimsy (I don't think it will break unless someone smacks the phone down whilst standing)
No dust covers on the jacks (I personally like this as I hate having to remove dust covers when I want to plug anything in)
Wrapup:
For $6 shipped I couldn't be happier.
Unless I find something hugely better or the otterbox commuter drops in price by $20, I'm sticking with this.
Pics:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've got the same case, modded it to use with my flip cover and it works great. With the flip cover on I can fold it back and prop the stand on it or it lays flat in front like a keyboard on a laptop. The only problem I have with it is the kickstand is a bit flimsy.
I like to break stuff!
-EViL-KoNCEPTz- said:
I've got the same case, modded it to use with my flip cover and it works great.
Click to expand...
Click to collapse
I think I might give this one a go - can't say no to extra protection!
montymintypie said:
I think I might give this one a go - can't say no to extra protection!
Click to expand...
Click to collapse
I put the flip cover on, then put the case on and marked it just 1mm-2mm from the top and bottom of the flip cover then removed the case and cut it down to the little groove along the back edge, then cut along the groove. Afterwards I sanded the back edge with 200-1800 grit sand paper and it looks factory finished now.
I like to break stuff!
-EViL-KoNCEPTz- said:
I put the flip cover on, then put the case on and marked it just 1mm-2mm from the top and bottom of the flip cover then removed the case and cut it down to the little groove along the back edge, then cut along the groove. Afterwards I sanded the back edge with 200-1800 grit sand paper and it looks factory finished now.
I like to break stuff!
Click to expand...
Click to collapse
I don't quite read you... Pics?
Monty, i found one exact replica of the Otterbox Commuter for $5 and mod it to have a thin kickstand.
http://forum.xda-developers.com/showthread.php?t=2153383
I spliced in the kickstand from a $9 TPU casing. The point is it's more protected from drops & has a functional stand without the $70 cost from where I come from.
Sent from my HTC ChaCha A810e using xda app-developers app
TheNeighbor101 said:
Monty, i found one exact replica of the Otterbox Commuter for $5 and mod it to have a thin kickstand.
Click to expand...
Click to collapse
If you can find me an ebay link I'll happily buy some to experiment with!
montymintypie said:
If you can find me an ebay link I'll happily buy some to experiment with!
Click to expand...
Click to collapse
Sorry, mate. I could only find it in a kiosk shop chain here called Swisstech. Nothing online.
SG Note II rooted with stock 4.1.1
Im pretty sure THIS is the same case.
Double0EK said:
Im pretty sure THIS is the same case.
Click to expand...
Click to collapse
Correct, it is identical.
Got the same case from amazon for a buck with 5 bucks shipping. Very god review and I agree with all of it.
Pics of the models version would be awesome.
Sent from my SAMSUNG-SGH-I317 using xda premium
Im uploading some pics of the case and flip cover now, will take some with them on the phone when my wife gets home so I can use her phone camera
I like to break stuff!
Anyone with the white case notice a halo when taking flash pictures?
Sent from the TermiNOTEr 2!
I just received my uag scout case and then I see this thread. Blast. The uag case is nice. Fit is not a hundred percent but protection feels good. What it is, is not worth 39 that I paid for it. This case looks like it would offer similar level of protection to the uag case. Anybody compared the two? Might get it to cutout the back to allow for better charging wen I finally get around to performing the induction charging mod.
I like to break stuff!
I'll post pictures on the phone soon, either tonight if I can get decent pics with my wifes photon on weds when I get home and have my 2nd note I can put the case on and take pics
I like to break stuff!
I just got the same one. It's tight. No pun intended.
Sent from my SGH-T889 using xda app-developers app
The only thing to be careful with on this case is the inside edges are pretty sharp, at least on mine, and scuff up the edges of the phone. The reason I don't use it on my new note.
Sent from my Note II
asmd6230 said:
I just received my uag scout case and then I see this thread. Blast. The uag case is nice. Fit is not a hundred percent but protection feels good. What it is, is not worth 39 that I paid for it. This case looks like it would offer similar level of protection to the uag case. Anybody compared the two? Might get it to cutout the back to allow for better charging wen I finally get around to performing the induction charging mod.
Click to expand...
Click to collapse
Sorry, but in terms of quality these are in a different category. Two months ago I said to myself after getting a handful of ebay cases - hey they all cost as much as one of the premium one. Then, I compared it to those from UAG, Case-Mate, and Otterbox - and the quality and fitment of ebay cases was pale in comparison. They will offer a similar level of protection, I will not deny that. But you will see how brittle plastic material is, how hard to push volume/power buttons, how flimsy and stretchy silicone inserts, how poorly inner/outer shells interconnect, how flimsy kickstand is, the silicone/plastic gets a blue shade from your jeans pocket, and how poor some of the port openings are. Regarding price of UAG - that's expected when a brand new product is released and there is such a high demand for it, thanks to a great reputation of their S3 cases.
Here's pics of it on the phone itself
I like to break stuff!