I'm not that great at prose. Bullet points for all of you!
Bought from here. Also comes in white and red.
Notes:
The great big DANGER sticker and Big Scary Laser sticker is something I bought separately.
Pros:
It's 6 freaking dollars!
Does not feel cheap
Volume/power buttons retain their 'click'
Reasonable protection
High lip for drop protection
Lip does not impede touching the edge of the screen
Stand actually useful (comfortable angle)
Slippery enough to slide into my pocket, grippy enough to comfortably stay on a table
Does not attract fingerprints at all
Fit is very tight, phone absolutely won't come out on its own
Feels comfortably rugged but not ridiculously so
Would not be afraid to drop the phone whilst in the case
Cons:
Volume/power buttons have very little definition on the case, very easy to accidentally press volume down whilst holding the phone
Stylus cutout could be a tad bigger
Larger headphone connectors may not fit
Larger microUSB connectors may not fit
Can be a little fiddly to get the phone out of the case due to tight fit
Neutral:
Stand only has one angle (I like it for the simplicity, but each to their own)
Stand feels a little flimsy (I don't think it will break unless someone smacks the phone down whilst standing)
No dust covers on the jacks (I personally like this as I hate having to remove dust covers when I want to plug anything in)
Wrapup:
For $6 shipped I couldn't be happier.
Unless I find something hugely better or the otterbox commuter drops in price by $20, I'm sticking with this.
Pics:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've got the same case, modded it to use with my flip cover and it works great. With the flip cover on I can fold it back and prop the stand on it or it lays flat in front like a keyboard on a laptop. The only problem I have with it is the kickstand is a bit flimsy.
I like to break stuff!
-EViL-KoNCEPTz- said:
I've got the same case, modded it to use with my flip cover and it works great.
Click to expand...
Click to collapse
I think I might give this one a go - can't say no to extra protection!
montymintypie said:
I think I might give this one a go - can't say no to extra protection!
Click to expand...
Click to collapse
I put the flip cover on, then put the case on and marked it just 1mm-2mm from the top and bottom of the flip cover then removed the case and cut it down to the little groove along the back edge, then cut along the groove. Afterwards I sanded the back edge with 200-1800 grit sand paper and it looks factory finished now.
I like to break stuff!
-EViL-KoNCEPTz- said:
I put the flip cover on, then put the case on and marked it just 1mm-2mm from the top and bottom of the flip cover then removed the case and cut it down to the little groove along the back edge, then cut along the groove. Afterwards I sanded the back edge with 200-1800 grit sand paper and it looks factory finished now.
I like to break stuff!
Click to expand...
Click to collapse
I don't quite read you... Pics?
Monty, i found one exact replica of the Otterbox Commuter for $5 and mod it to have a thin kickstand.
http://forum.xda-developers.com/showthread.php?t=2153383
I spliced in the kickstand from a $9 TPU casing. The point is it's more protected from drops & has a functional stand without the $70 cost from where I come from.
Sent from my HTC ChaCha A810e using xda app-developers app
TheNeighbor101 said:
Monty, i found one exact replica of the Otterbox Commuter for $5 and mod it to have a thin kickstand.
Click to expand...
Click to collapse
If you can find me an ebay link I'll happily buy some to experiment with!
montymintypie said:
If you can find me an ebay link I'll happily buy some to experiment with!
Click to expand...
Click to collapse
Sorry, mate. I could only find it in a kiosk shop chain here called Swisstech. Nothing online.
SG Note II rooted with stock 4.1.1
Im pretty sure THIS is the same case.
Double0EK said:
Im pretty sure THIS is the same case.
Click to expand...
Click to collapse
Correct, it is identical.
Got the same case from amazon for a buck with 5 bucks shipping. Very god review and I agree with all of it.
Pics of the models version would be awesome.
Sent from my SAMSUNG-SGH-I317 using xda premium
Im uploading some pics of the case and flip cover now, will take some with them on the phone when my wife gets home so I can use her phone camera
I like to break stuff!
Anyone with the white case notice a halo when taking flash pictures?
Sent from the TermiNOTEr 2!
I just received my uag scout case and then I see this thread. Blast. The uag case is nice. Fit is not a hundred percent but protection feels good. What it is, is not worth 39 that I paid for it. This case looks like it would offer similar level of protection to the uag case. Anybody compared the two? Might get it to cutout the back to allow for better charging wen I finally get around to performing the induction charging mod.
I like to break stuff!
I'll post pictures on the phone soon, either tonight if I can get decent pics with my wifes photon on weds when I get home and have my 2nd note I can put the case on and take pics
I like to break stuff!
I just got the same one. It's tight. No pun intended.
Sent from my SGH-T889 using xda app-developers app
The only thing to be careful with on this case is the inside edges are pretty sharp, at least on mine, and scuff up the edges of the phone. The reason I don't use it on my new note.
Sent from my Note II
asmd6230 said:
I just received my uag scout case and then I see this thread. Blast. The uag case is nice. Fit is not a hundred percent but protection feels good. What it is, is not worth 39 that I paid for it. This case looks like it would offer similar level of protection to the uag case. Anybody compared the two? Might get it to cutout the back to allow for better charging wen I finally get around to performing the induction charging mod.
Click to expand...
Click to collapse
Sorry, but in terms of quality these are in a different category. Two months ago I said to myself after getting a handful of ebay cases - hey they all cost as much as one of the premium one. Then, I compared it to those from UAG, Case-Mate, and Otterbox - and the quality and fitment of ebay cases was pale in comparison. They will offer a similar level of protection, I will not deny that. But you will see how brittle plastic material is, how hard to push volume/power buttons, how flimsy and stretchy silicone inserts, how poorly inner/outer shells interconnect, how flimsy kickstand is, the silicone/plastic gets a blue shade from your jeans pocket, and how poor some of the port openings are. Regarding price of UAG - that's expected when a brand new product is released and there is such a high demand for it, thanks to a great reputation of their S3 cases.
Here's pics of it on the phone itself
I like to break stuff!
Related
Just got my Rearth Ringke case for the Nexus S.
Aqua Black in color which is transparent.
Background: I purchased the Best Buy Platinum Series Combo Case (rebranded Seidio Innocase Surface) when I first bought my Nexus S on release date Dec. 16, 2010.
Unfortunately because of the curvature of the Nexus S, this case isn't as high quality as Seidio's previous Innocases for other phones. I've stopped using it and only use the Sprint-Clip Holster along with other cases. Here is my post (just pictures) about the Platinum/Seidio case: http://forum.xda-developers.com/showthread.php?t=875231
In looking for other cases, I purchased a really cheap TPU style case on eBay, and have been using it. I'm ok with it, but there are some issues that I do not like (volume/power buttons are flush and hard to push/find).
Review: Received the Rearth Ringke case today for my Nexus s.
Packaging was great. Sturdy box, mailed from Louisiana. The actual packaging for the case is nice too.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm not sure if it's because of the transparent color/material, but it's very silicone like, and very squishy. The eBay TPU case I have was very hard.
It's easy to put the phone in the case, but because of how "squishy" it is, once you get the phone in, it is not perfecly in. You'll need to move it around and adjust the case and line up the camera/flash/speaker holes. My eBay TPU case, once I put the phone in, it fits perfectly in and no adjustments needed. I've only had this Ringke case today, so I will see how it lasts for the next few days and see if in the normal use of my phone if the case will move around and misalign.
So how does it feel? To me it feels pretty good. It's very thin and has some kind of texture in it. I've read others saying it's slippery and offers no grip. I disagree. There is a matte sort of feeling and it's not slippery at all.
You can see in some of the pictures, the Ringke logo is on top of the Samsung logo, visible in the transparent Black Ash colored case. This doesn't matter in the solid non transparent colors, but in this particular case, I would have prefered if they moved the Ringke logo up a bit as to not block the Samsung logo.
I noticed on the power button, there is a picture of a power icon. Nice touch but not sure if it's necessary since it's almost impossible to see. (The actual Nexus S does have a power icon on the power button, that's probably why they did it).
A huge plus with this case vs other TPU cases, the Power button/Volume control actually works! They stick out a bit and you can actually feel the buttons and press it with a nice feel and the buttons work!
I like the little indentation above the speaker hole, the raised edges around the camera hole, and the little notches above the FFC and Light Sensors. You can tell they did some design work on the case to make it a little different.
Also, the phone with the Ringke Case fits my Platinum Series Spring Clip Holster. That is a major plus.
All in all, this is a very nice case. Steps above cheap HK eBay cases. The price is line with similar style (non eBay) cases.
More Pictures:
Does the case feel like it will start rubbing off? Like rubber cases that if you slide in and out of jeans pockets will start to peel and whatnot.
Sent from my Nexus S
wyaeiga said:
Does the case feel like it will start rubbing off? Like rubber cases that if you slide in and out of jeans pockets will start to peel and whatnot.
Sent from my Nexus S
Click to expand...
Click to collapse
Nah. It's not coated in rubber, no it doesn't feel/look like it'll wear off.
Sent from my Nexus S
Very Happy with this case, good texture, very good fit. It protects enough for the everyday normal usage and very occasional drops (don't tell me you never drop things...). I got the black one.
I ordered a tougher one for when I do all my crazy cycling, climbing, travelling, running, hiking, etc... so it can safely take a few more higher&tougher impacts.
nxt said:
Nah. It's not coated in rubber, no it doesn't feel/look like it'll wear off.
Sent from my Nexus S
Click to expand...
Click to collapse
The matte texture is actually rubbing off for me around the edges. Makes it a bit shinnier and stickier around the edges.
Sent from my Nexus S using XDA App
I got this case pretty neat will review soon
Can you tell me if the case can be bought in stores in the US?
My brother is currently in the US and I'd ask him to bring me one along ...
I have both ...both great case minimal bulk added and love the back finish doesn't collect sweat/.fingerprints
the plus on the Rearth Ringke is the buttons they seem to stick out so easier to find were the case on the right they dont.
And the cut outs are slightly better
But the case on the right has a glossy finish on the front and IMO looks better like the phone has no case on
Both are great cases TPU is much better than silicone cases that get sweaty and lose shape after a while
here is a vid review also
http://www.youtube.com/watch?v=Yo9swPPpDVU
Any hints on where to get it?
All usable colors seem to be out of stock on their website.
DerSeppel said:
Any hints on where to get it?
All usable colors seem to be out of stock on their website.
Click to expand...
Click to collapse
I had wanted a black, but settled for an aqua black just a couple weeks ago from their website. Seems all they have left are colors other than black:
http://www.rearthusa.com/Nexus-S-Nexus-S-4G_p_160.html
I was able to find one or two other retailers via Google Shopping, but their price was the best (with free shipping). I was impressed. It was basically next day from LA to CA (although YMMV).
Also, I wanted to add, I have a Casemate Pop, Seido Active X, and this case. The Ringke is my favorite out of all of them thus far.
As far as the feel of it is, I liken it to the feel of the Nexus One's Teflon exterior.
I just bought two of these for my girlfriend and myself (i9020T) and we're both very happy with it. Sticks well to the phone, not too heavy/bulky and looks good. My only gripe with it is that the Black is not really that black in person like it is in the promo pictures
mageyb said:
I just bought two of these for my girlfriend and myself (i9020T) and we're both very happy with it. Sticks well to the phone, not too heavy/bulky and looks good. My only gripe with it is that the Black is not really that black in person like it is in the promo pictures
Click to expand...
Click to collapse
Did you get black or aqua black? Black has been out of stock which might explain the discrepancy you're seeing
Sent from my Nexus S 4G
DerSeppel said:
Any hints on where to get it?
All usable colors seem to be out of stock on their website.
Click to expand...
Click to collapse
um.. no they aren't?
http://www.rearthusa.com/Nexus-S-Nexus-S-4G_p_160.html
Man the case look to bulky for my taste, is there a superthin case anywhere?
Or am i stuck with my pouch?
Linus82 said:
Man the case look to bulky for my taste, is there a superthin case anywhere?
Or am i stuck with my pouch?
Click to expand...
Click to collapse
Only thing thinner is the Incipio Feather case. But it's not going to offer the same degree of protection.
Sent from my Nexus S using Tapatalk
i wish they came with a clear case!. i bought a white nexus s, and would love to see the white beneath the case lol. the clear cases i've found look cheap and bulky. but i did find a really good case, i am rockin Proporta's Mizu Shell in charcoal. Has a great feel and fit to it but again, i wish it was clear, as it only comes in charcoal. anyone know a good clear and slim case?
Thanks for the review! Once I had found out OtterBox wasn't releasing one for the Nexus S I couldn't decide between this and the Ultra Silke. I Ordered the Rearth one after reading this review. Only wish they had Black in stock, and quicker shipping to Canada..
Does this case make it hard for you to access the phone in your pockets? I bought a silicone one it was really hard to put it in and take it out of the pockets.
I usually wear jeans...
This looks like exactly what I want. Thanks for the thorough review.
Okay I would prefer to have an Otterbox for my Nexus S, but apparently they won't be making one. Anyone know of an Otterbox alternative? I already have a silicon case, a TPU case on the way, and a hard case. (The hard case is a generic piece of crap, doesn't have any padding or rubber coating on the inside so the phone gets scratched when it vibrates, etc.)
Im open to suggestions. Willing to spend $25ish.
$25ish... otterbox style cases sell for 40+. But check out the casemate pop http://www.youtube.com/watch?v=Z4auzR3OVB8 it's the best case i could find on the market right now.
Feel free to suggest the $40+ alternatives. If its worth it, a few bucks don't matter to me.
Thanks for the suggestion on Cast Mate, but it doesn't cover the front top area.
Yeah i was in the same predicament, the trident is the only 3 layer case i could find (a la defender)
http://www.youtube.com/watch?v=MenxwxVixGM&feature=channel_video_title but it's not out yet and the makers don't even say when it will be. the best cases you can butyright now are the pop and the seido active x. neither have the glass protector but the pop comes with a crappy scratch protector for the screen, and you can buy it at best buy (which is why i chose it over the active x). if you find one with a glass protector let me know as i am terrified i'm gonna drop my phone screen first on a rock.
themapleboy said:
Yeah i was in the same predicament, the trident is the only 3 layer case i could find (a la defender)
http://www.youtube.com/watch?v=MenxwxVixGM&feature=channel_video_title but it's not out yet and the makers don't even say when it will be. the best cases you can butyright now are the pop and the seido active x. neither have the glass protector but the pop comes with a crappy scratch protector for the screen, and you can buy it at best buy (which is why i chose it over the active x). if you find one with a glass protector let me know as i am terrified i'm gonna drop my phone screen first on a rock.
Click to expand...
Click to collapse
The Trident Cyclops? Its out: http://www.tridentcases.com/product_52_67.html
EDIT: I was about ready to buy this phone until I saw in that video review that the screen protector isnt a perfect fit to the curved design of the nexus...
its not out the buy now button takes you to a preorder now page. and it isnt a perfct fit because of the curve, it can probably be adjusted for with some scratch protectors on the glass to make it a tighter fit.
It's showing that the Trident Cyclops is available on amazon.
http://www.amazon.com/Trident-CY-GN..._1_3?s=wireless&ie=UTF8&qid=1303943168&sr=1-3
I own the Trident Case, and I have no issues with the screen cover not matching 100%.
There may be a slight gap between the screen cover and the phone itself, but it is minuscule at worst. I have yet to have an issue with the touchscreen not working because of this 'gap'.
The case is pretty sturdy overall, the only real gripe I have against it is the plastic cover over the rear-facing camera reflects a fair amount of flash, distorting pictures. I had to remove it to take a decent picture.
Hope this helps.
Thank you for the feedback. It does help. I will probabaly go for the Trident case unless a better alternative is given.
No worries.
I should also mention that the silicon ring around the outside of the shell is very grippy stuff. Which means it will stick to the inside of your pockets and such.
Sent from my infin1ty Nexus S using XDA Premium App
May I ask where you got yours from? The one from Amazon ships in "1 to 3 months" and there doesn't seem to be a way to order directly from Trident's website.
I ordered mine straight from their website roughly a month ago. Very pleasant company to work with. I had to call and change my order and they were very helpful. You could try calling them and seeing if they are out of stock or whatnot.
Sent from my infin1ty Nexus S using XDA Premium App
I ordered the trident case yesterday. It said it wouldn't be in stock until 5/11 but I'm ok with that. As far as the screen protector goes, with all of my otterbox cases I've always taken that out and put my own sp on it.
The only benefit of the sp on the case is that it seals your phone from dust.
Can't wait to get mine and see how it feels. Best of luck finding what your looking for.
Sent from my Nexus S using XDA Premium App
donharden2002 said:
I ordered the trident case yesterday. It said it wouldn't be in stock until 5/11 but I'm ok with that. As far as the screen protector goes, with all of my otterbox cases I've always taken that out and put my own sp on it.
The only benefit of the sp on the case is that it seals your phone from dust.
Can't wait to get mine and see how it feels. Best of luck finding what your looking for.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
Did you get your case? How do you like it? Does the phone scratch from the inside of the case since there is no interior soft padding?
http://www.seidioonline.com/product-p/bd4-hkr4ssn2.htm
I bought the Seidio Convert.
Like the otterbox it comes with a holster.
It is actually 2 cases in one.
The 1st case is a thin 2 piece hard shell. Nice for in the pocket.
Then you pop a silicone case over that with an additional hard plastic exo-skeleton that protects the sides and corners.
The holster is much better than the otterbox holster and can even lock the phone in.
Sent from my Nexus S using XDA App
wpghtc said:
I bought the Seidio Convert.
Like the otterbox it comes with a holster.
It is actually 2 cases in one.
The 1st case is a thin 2 piece hard shell. Nice for in the pocket.
Then you pop a silicone case over that with an additional hard plastic exo-skeleton that protects the sides and corners.
The holster is much better than the otterbox holster and can even lock the phone in.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
I bought the same case and I'm pretty happy with it. I find it a little bulky with the full protection and the holster but it's not that bad. I'll come back with pictures.
I just bought that case at bust buy. I hope the inner hard shell case doesn't scratch due to vibration. With all three layers on, it feels like I'm sticking my finger into an oraface.... The outside shell reminds me of fingers. Add that all together and I get the mental image of "what you see you cannot unsee," goatse.
I might have to "circumcise" the rubber lens cap flap so I can do some stealth video/photo shots a little easier. There's nothing more annoying than your flap getting in the way!
LMAO
Now all I need as a home screen wallpaper pic is a shot of someone's "insides" and that would, LOL, complete the whatever. LOL
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.bestbuy.com/site/Platinu...8335742853&skuId=2553277&st=Nexus S&cp=1&lp=8
This is made by Siedio so it's pretty much exactly the same thing and price is the same too except you can buy it in a store and bypass the waittime on shipping
Whoops, didn't see above post, well there's the link for you to check which BB's have them in stock in case you decided on that one.
herbthehammer said:
I just bought that case at bust buy. I hope the inner hard shell case doesn't scratch due to vibration. With all three layers on, it feels like I'm sticking my finger into an oraface.... The outside shell reminds me of fingers. Add that all together and I get the mental image of "what you see you cannot unsee," goatse.
I might have to "circumcise" the rubber lens cap flap so I can do some stealth video/photo shots a little easier. There's nothing more annoying than your flap getting in the way!
LMAO
Now all I need as a home screen wallpaper pic is a shot of someone's "insides" and that would, LOL, complete the whatever. LOL
Click to expand...
Click to collapse
I am with you on this one. This case is something else. The lady at best buy says the same company manufactures otterbox cases. I saved the receipt, just in case I feel this is overkill in a couple days. Typing the "p" and "q" are a little annoying.
Sent from my Nexus S using XDA Premium App
Well I only had to swallow my pride for about a day because my new ebay case arrived today after only having ordering it about a day and a half ago so off goes pink and grey and on come white on white. I really wanted a white case since i opted gor the white Note 2 it just didnt seem right to put any other case on it. So here are a few pics. To me I would compair it to a siedio since it is a two piece case consisting of a silica rubber case and a plastic outer shell. The case also has a built in stand for watching movies as well as a holster whose belt clip doubles as a stand as well.
I tried to put the Note 2 with the pink and grey body glove case on it in the holster but it was too loose and would not stay so that lead me to believe that this combo in thick but not by much which equals more protection to me.
The case and holster were only about $12 bucks shipped and it is an unbranded unit but better built then some of the units I have seen that people have purchased off ebay.
I am happy with the case, I may or may not purchase a "Big Name Brand" case in holster in the future but only if it comes in white.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I just got this case in black, it's really very nice. I like that it covers all the buttons and the ports, it really provides some great protection. Having two options for stands is nice too.
Thanks for posting this, I just ordered one myself. I had a few questions if you don't mind. How does the overall fit of the case, is it easy to put on and take back off? How much thicker does it actually make the phone? Does it attract lint/dust when it's in your pocket, or is it too big to carry around in your pocket.
Link to ebay please??
Sent from my GT-N7100 using xda app-developers app
.i ordered a case that had a similar belt clip for my GS2 and i broke the clip...TWICE
please comment on whether or not the belt clip seems secure (if it will snap off easily or not)...both times i broke it i barely even touched it
with a phone this large i can see it getting caught somewhere or banging into something
also...does the phone fit properly in the holster (when the screen is facing out) so that you can actually use the kickstand feature? not the kickstand that is connected to the case...im asking about the kickstand that is connected to the belt holster... the one i bought for my GS2 didnt...it only fit when the screen was faced inwards
Thanks for showing this. I bought the white and black one today. I did consider getting the white only. It looks pretty nice. Thanks for sharing.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Link to ebay please??
Sent from my SGH-T889 using xda premium
A lot of questions?..........
To all that wanted a few better pictures then what is posted on ebay your welcome.
Unfortunately my work computer will not allow me to look at online auctions so ebay links are out........maybe....wait one
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110973691923
I find the case to be very easy to put on and take of if necessary, fit and finish a very good, as far as lint from pocket, I cannot comment on that one because that why I got a case with a holster.....lol. I dont think it makes the phone that much thicking and its weight is still very minimal.
I have not attempted to put the phone in the holster with the screen out. I had an experience once walking by the ironing board in my bedroom and bumped a metal piece sticking out and a had a wonderful 1 1/2 inch scratch on my beautiful phone but I or someone else will check that out and post it up later.
I do think that the holster clip is the weak link of this whole package. Its is no Otterbox or Ballistic but I have broken my Otterbox holster clip getting into my truck in the past.
I can say that for the cost it is one of the nicest, cheap cases floating around on ebay. I am happy to display my incredibly expensive phablet in it.
bignibb said:
To all that wanted a few better pictures then what is posted on ebay your welcome.
Unfortunately my work computer will not allow me to look at online auctions so ebay links are out........maybe....wait one
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110973691923
I find the case to be very easy to put on and take of if necessary, fit and finish a very good, as far as lint from pocket, I cannot comment on that one because that why I got a case with a holster.....lol. I dont think it makes the phone that much thicking and its weight is still very minimal.
I have not attempted to put the phone in the holster with the screen out. I had an experience once walking by the ironing board in my bedroom and bumped a metal piece sticking out and a had a wonderful 1 1/2 inch scratch on my beautiful phone but I or someone else will check that out and post it up later.
I do think that the holster clip is the weak link of this whole package. Its is no Otterbox or Ballistic but I have broken my Otterbox holster clip getting into my truck in the past.
I can say that for the cost it is one of the nicest, cheap cases floating around on ebay. I am happy to display my incredibly expensive phablet in it.
Click to expand...
Click to collapse
the holster clip is my concern...as you said that you believe it is the weakest link as well...like i mentioned i went through 2 of these on my GN2 (not the same exact one, but the holster clip part looks to be exactly the same) which ended up costing me like $30..that is why im strongly considered getting the Seidio Surface combo..but that is gonna cost me $57..i think i might have to pay a higher premium to get better quality this time around
follow up
does the phone fit properly in the holster (when the screen is facing out) so that you can actually use the kickstand feature? not the kickstand that is connected to the case...im asking about the kickstand that is connected to the belt holster...
The answer is...... It does not go into the holster with the screen facing out. I know that seems kind of weird since it has a kickstand feature but it does not slide into the holster that way.
bignibb said:
does the phone fit properly in the holster (when the screen is facing out) so that you can actually use the kickstand feature? not the kickstand that is connected to the case...im asking about the kickstand that is connected to the belt holster...
The answer is...... It does not go into the holster with the screen facing out. I know that seems kind of weird since it has a kickstand feature but it does not slide into the holster that way.
Click to expand...
Click to collapse
lol yeah...design flaw...i remember when i emailed the guy i bought it from he was like "just apply pressure and force it"...i was like..umm no lol
Is the rubber thick around the top and bottom? Is the rubber soft or more tpu like? Can I get a close up pic of the rubber thickness off the phone?
thanks
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Search ebay: WHITE RUGGED CASE & BELT CLIP HOLSTER KICKSTAND FOR SAMSUNG GALAXY NOTE 2 II
Forum wont allow links..
sl5400 said:
Search ebay: WHITE RUGGED CASE & BELT CLIP HOLSTER KICKSTAND FOR SAMSUNG GALAXY NOTE 2 II
Forum wont allow links..
Click to expand...
Click to collapse
They are all the same pics. I want to see actual pics.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
oh gawd that (3rd pic) is freakin ugly... someone had to say it congrats on your new protection tho
.....
boodies said:
oh gawd that (3rd pic) is freakin ugly... someone had to say it congrats on your new protection tho
Click to expand...
Click to collapse
It's the back side of the holster..........
I have nothing more to say......lol
Is the rubber thick around the top and bottom? Is the rubber soft or more tpu like? Can I get a close up pic of the rubber thickness off the phone?
The rubber around the top and bottom is the same as it is on all sides, no extra padding in possible problem areas. The rubber is soft which should give some shock absorbtion as well as bounce if dropped on a hard surface (may I never need to know)
I will try to post a pick of it later.
So after my Nilkin case took a tumble and broke one of the edges by the volume rocker I wanted to review some other cases that offered more protection around the edges without adding bulk. The criteria was simple, stick as close to the thickness of the Nilkin as possible but add more protection.
Today I have the Samsung official case that Mobilefun have kindly sent me.
One thing is for certain, pictures make it look thicker than it actually is. The Nilkin case is barely any thinner but you get the added top and bottom protection on this Samsung case which gives the impression of a thicker case in images. In reality it feels more comfortable than the Nilkin due to the curvier shape and soft case bezel. I find it nicer to type with this case on as my fingers are no longer rubbing against the straight edge at the bottom like they would with the Nilkin and all other snap on cases like it.
Negatives:
I can spot one immediately which is that the back is glossy and as such does attract fingerprints, dust and scratches. Over time this finish will look tired like car paintwork that's seen sponges and machine car washes (I've yet to see a glossy black finish that doesn't end up this way on a gadget!) so bare this in mind. It might be possible to take a scouring pad to it like we did with the glossy Galaxy S2 bits back in the day
Regardless of the name "Hard case" it's not actually all hard, the Nilkin is harder. The back of the Samsung case is hard glossy plastic but the rest is harder flexible material and feels like it will take more of an absorbing impact.
Pics & final thoughts:
Vs Nilkin
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's a £15 case so for once it's not unreasonably priced compared to the branded 3rd party cases out there (Casemate, Otterbox etc) given that it's an official accessory. I'm due a couple of other cases so will compare the lot in a few days but so far this Samsung case has impressed me. It will definitely take more of a beating than the Nilkin has and protect my phone at the same time... Which leads me on to beatings. Had I received this case a couple of days earlier I would not currently have a chip on the lower right of the screen on my handset after a nasty fall on brick stairs.
Such is life
I also use this case now and like it. Although got it slightly cheaper from amazon - around £10 ( http://www.amazon.co.uk/gp/product/B009KZ36ZM/ref=oh_details_o00_s00_i00 )
I was thinking of combining this case with the official flip case (to better protect the screen surface). Has anyone tried it? Does it work or the extra bulk of the flip case does not allow this protective case to be fitted?
Hmm not sure how the flip would work with this case on without cutting the soft side bits?
I tried the case mate tough first but the cutouts around the usb port and s-pen were too sharp and made the phone uncomfortable to hold.
Have the Samsung case on my wife's Note II and and liked it, have one myself now
robbiekhan said:
Hmm not sure how the flip would work with this case on without cutting the soft side bits?
Click to expand...
Click to collapse
I am not sure too - would be good to try it myself, but nobody of my friends with Note2 has a flip case.
I have seen this idea being implemented using a slightly moded UAG case (if I am not mistaken) and official flip cover. I think I saw it in this thread: http://forum.xda-developers.com/showthread.php?t=1931209
Update:
Here it is - look a short discussion around posts 1002-1010: http://forum.xda-developers.com/showthread.php?t=1931209&page=101
And another combination of a protective case with a flip cover: http://forum.xda-developers.com/showpost.php?p=38575302&postcount=1082
Wow.... Those photos.... So beautifully shot it made me tempted to get one myself too!
DaniLoveSky said:
I am not sure too - would be good to try it myself, but nobody of my friends with Note2 has a flip case.
I have seen this idea being implemented using a slightly moded UAG case (if I am not mistaken) and official flip cover. I think I saw it in this thread: http://forum.xda-developers.com/showthread.php?t=1931209
Update:
Here it is - look a short discussion around posts 1002-1010: http://forum.xda-developers.com/showthread.php?t=1931209&page=101
And another combination of a protective case with a flip cover: http://forum.xda-developers.com/showpost.php?p=38575302&postcount=1082
Click to expand...
Click to collapse
Hmm I'm still undecided on this, if you give it a try then be sure to post your thoughts and of course pics!
kEvinErd said:
Wow.... Those photos.... So beautifully shot it made me tempted to get one myself too!
Click to expand...
Click to collapse
Thanks! You don't have to buy one just because of the pictures but I do try to put across how stuff looks in reality in my pictures because I've never been a fan of stock photos as it looks different in person.
Mujja said:
I tried the case mate tough first but the cutouts around the usb port and s-pen were too sharp and made the phone uncomfortable to hold.
Have the Samsung case on my wife's Note II and and liked it, have one myself now
Click to expand...
Click to collapse
Yeah that's the problem with some cases where they have sharp/non curved bits around the bottom so when you use the phone it's a bit uncomfortable. Normally it's not noticeable until you use another case that doesn't have it and it's a nice welcome difference.
This case can be used along with the replacement backdoor flip cover (OEM Samsung with nfc). I also use the backdoor flip cover with my Otterbox commuter case without a problem and without modification. It's awesome in both applications because you get full phone protection, and in the instance I'm using the case discussed in this thread, without adding a lot of bulk to the phone.
Sent from my SCH-I605 using Tapatalk 2
harajyuks said:
This case can be used along with the replacement backdoor flip cover (OEM Samsung with nfc). I also use the backdoor flip cover with my Otterbox commuter case without a problem and without modification. It's awesome in both applications because you get full phone protection, and in the instance I'm using the case discussed in this thread, without adding a lot of bulk to the phone.
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Thank you for the info!
Could you post few photos of the combo in closed and open states please?
Just to make sure it is convenient for my use patterns before buying it...
If you want to use the official Samsung case with the flip cover, many people (myself included) just cut the softer outer plastic bit where it impedes the flip cover. Thanks to the back being a harder plastic it doesn't lose too much integrity and still holds onto the phone fine. There was a thread about it here in this section with photos and stuff, I'm sure you'll find it with a bit of searching.
The benefit of actually cutting the case rather than leaving it intact is you can still fold the cover back and type with two hands, whereas I'd you didn't the case would only open to about 90° from the screen
Sent from my GT-N7100 using xda premium
DaniLoveSky said:
Thank you for the info!
Could you post few photos of the combo in closed and open states please?
Just to make sure it is convenient for my use patterns before buying it...
Click to expand...
Click to collapse
D3_ said:
If you want to use the official Samsung case with the flip cover, many people (myself included) just cut the softer outer plastic bit where it impedes the flip cover. Thanks to the back being a harder plastic it doesn't lose too much integrity and still holds onto the phone fine. There was a thread about it here in this section with photos and stuff, I'm sure you'll find it with a bit of searching.
The benefit of actually cutting the case rather than leaving it intact is you can still fold the cover back and type with two hands, whereas I'd you didn't the case would only open to about 90° from the screen
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Here you go
The phone with the flip cover back door installed
A few pictures with the car in question in this post
Some more with the flip cover back door in combination with the Otterbox commuter
The case would fit better with modification but I chose to not modify and it works fine. Definitely requires 2 handed use until your used to welding it in these configurations.
Sent from my SCH-I605 using Tapatalk 2
And here I've made the glossy back matte
Sent from a Toaster using XDA App
robbiekhan said:
And here I've made the glossy back matte
Sent from a Toaster using XDA App
Click to expand...
Click to collapse
And why would you do that, Back to the review I brought this case off amazon uk and yes its a good case does not add to much bulk ti the phone either. No point wasting money on cheap tpu cases anymore as the official is only £10.
Sent from my GT-N7100 using xda premium
To see what it's like with a matte finish as matte looks more professional than glossy. And why not for the sale of posting feedback?
Nice post!
Could you post a picture of the inside of the case, specifically the part where the lanyard loop goes? Is it recessed, and is it strong?
Amazing pictures, makes me want to get it more, and it's one of the few cases with a lanyard loop :good:
Damn sorry I don't have it any more
Anyone have the Surplus Wind Heavy Duty Metal Anti Shock Drop Protection Case yet? Any good?
Link
BigPimpin said:
Anyone have the Surplus Wind Heavy Duty Metal Anti Shock Drop Protection Case yet? Any good?
Link
Click to expand...
Click to collapse
No... but looks cool... wonder how bulky it is?
BigPimpin said:
Anyone have the Surplus Wind Heavy Duty Metal Anti Shock Drop Protection Case yet? Any good?
Link
Click to expand...
Click to collapse
They're great! I have one for the Galaxy S4, and it feels like a tank. I can't imagine how big it would be for the Note 2 though.
The two aluminium halves of the case support the phone where the screw holes are, so I wouldn't be surprised if it could withstand being run over by a car. It's a good idea to install a wireless charging pad as well. It works through the silicone cutout in the back, and makes charging much more convenient! The built-in glass screen protector is also nice. None of this!:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I wouldn't trust it to be fully waterproof though. It's weather resistant at most, protecting it from rain and stuff. Just look at that camera cutout!
to bulky
looks to bulky for my taste. if it adds that much to a s4. can imagine what it's gonna add to a note 2. i'll stick with my otterbox defender
OvrDriVE said:
looks to bulky for my taste. if it adds that much to a s4. can imagine what it's gonna add to a note 2. i'll stick with my otterbox defender
Click to expand...
Click to collapse
Went ahead and ordered one the other day. I'll post pics when it comes in. I'll get some side by sides of it vs the OtterBox Defender I have.
on the coffin like)))
i agree. coffin like. lol
Wow! Thats huge!
If you look on that site there's another heavy duty case. It's not as coffin like and has rounded edges.
I am super tempted also.... but ill let you take the plunge and tell us about it...to the dude that will stick with his otterbox... Ive never seen anything bigger than a defender
quatis7 said:
I am super tempted also.... but ill let you take the plunge and tell us about it...to the dude that will stick with his otterbox... Ive never seen anything bigger than a defender
Click to expand...
Click to collapse
lol, if you saw the size of my hands you'd understand why the otterbox feels so comfortable to me. i like the feel and overall protection provided by the defender case. anything else feels almost dainty to me so.
BigPimpin said:
Anyone have the Surplus Wind Heavy Duty Metal Anti Shock Drop Protection Case yet? Any good?
Link
Click to expand...
Click to collapse
No idea about it but thanks to inform
Got the case today. Ordered it on April 29th and got it in today, May 12th.
The case comes nicely packaged. The outside of the box says it's waterproof, but I wouldn't trust it at all. The camera area has a small piece of tempered glass over it and the seal around it looks like black glue. I't might be waterproof, but risk it. Also, the earplug port doesn't seem like the best seal either. It close really tight, but still seems like a risk. The phone speaker and seems like it has a small black screen over it, doesn't look water proof at all there. That's pretty much the only negative things about the case. The rest is pretty damn good.
The case comes packaged like this:
Opening the box you get the extra screws and the tool to remove the crews.
Now for size comparison. The case next to an Otterbox Defender case. This case is 1/8" longer and 1/8" wider then the Otterbox. To me, that doesn't feel any bigger in my hand at all.
The big difference is the height. The Otterbox is 1/4" thicker then the metal case. Here they are laying flat next to each other.
I weighed the phone in the Otterbox and it was 9.6 oz. In the metal case it weighed 11.4 oz., so a slight increase in weight. And to me the 2 oz. is that big of a deal. What's really nice is the tempered glass screen protector. It feels about 3x's thicker then the plastic one on the Otterbox. There isn't any problem with sensitivity screen interaction. Also, the black square on the back is some of the rubber from the inside of the case and it sits right in the palm and keeps the phone from slipping. The black all along the edges is rubber too and helps with grip. I can see the rubber possibly attracting some dust. Have to wait a few days and see how dirty it gets. All of the buttons work easily too. Power, volume and home button all work perfectly.
I showed this case to 3 other friends and family that have Note 2's and all want to order one now. The only thing that would make this case better would be a big name brand behind it that would back up the waterproof claim. If this case had been around when the Note 2 launched, I would have definitely picked it over the Otterbox.
nice side by side comparison. ty.
Before I got the case I did the live chat on the site and asked a few questions and they said NFC would not work once the case was on. I can use S Beam and all of that just fine since there isn't metal behind the black square on the back.
Also worth mentioning is the impact truss inside of the case's silicone bumper. They are triangular holes that help absorb shock when dropped.
Thanks for the awesome review. I couldn't wait and ordered mine before this review came out. I hope mine arrives as swiftly ad yours did. I am concerned that it won't fit in my iottie dash mount
Sent from my GT-N7105 using Tapatalk
Order Link?
Where I can order one?
BigPimpin said:
Got the case today. Ordered it on April 29th and got it in today, May 12th.
The case comes nicely packaged. The outside of the box says it's waterproof, but I wouldn't trust it at all. The camera area has a small piece of tempered glass over it and the seal around it looks like black glue. I't might be waterproof, but risk it. Also, the earplug port doesn't seem like the best seal either. It close really tight, but still seems like a risk. The phone speaker and seems like it has a small black screen over it, doesn't look water proof at all there. That's pretty much the only negative things about the case. The rest is pretty damn good.
The case comes packaged like this:
Opening the box you get the extra screws and the tool to remove the crews.
Now for size comparison. The case next to an Otterbox Defender case. This case is 1/8" longer and 1/8" wider then the Otterbox. To me, that doesn't feel any bigger in my hand at all.
The big difference is the height. The Otterbox is 1/4" thicker then the metal case. Here they are laying flat next to each other.
I weighed the phone in the Otterbox and it was 9.6 oz. In the metal case it weighed 11.4 oz., so a slight increase in weight. And to me the 2 oz. is that big of a deal. What's really nice is the tempered glass screen protector. It feels about 3x's thicker then the plastic one on the Otterbox. There isn't any problem with sensitivity screen interaction. Also, the black square on the back is some of the rubber from the inside of the case and it sits right in the palm and keeps the phone from slipping. The black all along the edges is rubber too and helps with grip. I can see the rubber possibly attracting some dust. Have to wait a few days and see how dirty it gets. All of the buttons work easily too. Power, volume and home button all work perfectly.
I showed this case to 3 other friends and family that have Note 2's and all want to order one now. The only thing that would make this case better would be a big name brand behind it that would back up the waterproof claim. If this case had been around when the Note 2 launched, I would have definitely picked it over the Otterbox.
Click to expand...
Click to collapse
m4ttj00 said:
Where I can order one?
Click to expand...
Click to collapse
The link is in the first post of this topic.
BigPimpin said:
The link is in the first post of this topic.
Click to expand...
Click to collapse
D'oh, thanks.
How do you like it so far? I've got an Otterbox Defender now and I do like it, but it's a little too bulky and makes the screen corners hard to touch.