Database Develop

[Review] SGP Ultra Silke Case

I just received the SGP Ultra Silke case for my Nexus S yesterday and like it a lot. Actually I was waiting for the Otterbox Defender case for Nexus S to come out but am getting tired of it so I just decided to give this case a shot because no one has written a review about it here yet.
Yeah, I know what you're thinking. Let's start with the pictures then
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First thing I'd like to say is this case costs $19.99 (excl. shipping) and comes in a standard SGP Case package (a.k.a. a hard clear plastic box), which includes the case itself and an Ultra Crystal Clear Steinheil screen protector. I did not install the screen protector because I already have full BSE skin on my Nexus S. I bought this case from SGP Store on eBay because the shipping cost is cheaper than buying from the official site. I was surprised that it took only about a week to ship from CA, US to Thailand (normally I'd expect about 10-14 days)
My first impression about the case is it looks almost the same as the Rearth Rinke case [1], [2]. However, from the information on its website, the SGP Ultra Silke is made of "hi-polymer coated silicon" so it is quite soft like a silicon case (unlike TPU cases) and has matted/smooth texture -- which feels very good in my hand. The installation was very easy. The case covers the front bezel and in the back there is an SGP Case logo which, for me, makes it looks good while keeping the minimalistic look
What I like most about this case are the cutouts -- the speaker and camera/flash holes fit perfectly. There is a raised edge around the camera hole, the speaker hole also get this little "curve" touch in the middle The USB and headphone holes work fine and there is even a separate hole for the microphone. I think SGP people did a very nice job on these small details.
And if you're in doubt, the power and volume buttons are fully functional -- just like there is no case on it. No annoying issues like the popular "S" shape TPU case whatsoever. And as you can see, there is a small power icon on the power button of the case. The volume button, however, looks a little bit plain to me though.
IMO, this case adds a lot less bulk than the "S" shape TPU case and provides more protection than the Incipio Feather case. It fits perfectly and adds more grip to the Nexus S while being stylish with its minimalistic look. I'll be happily using this SGP Ultra Silke as my main case until something better shows up (may be not the Otterbox Defender, who knows)

Bro is urs a i9020 nexus s or a I9023 nexus s?

noobhero said:
Bro is urs a i9020 nexus s or a I9023 nexus s?
Click to expand...
Click to collapse
It's I9020.
FYI, the "official" Nexus S that is being sold in Thailand is I9023 but I bought mine 2 months ago from Best Buy

Thanks mate, cant find an exact fitting case and sp for the i9023

noobhero said:
Thanks mate, cant find an exact fitting case and sp for the i9023
Click to expand...
Click to collapse
Found the case a couple of weeks ago at Momax but dunno if you'll like the design or not

suksit said:
Found the case a couple of weeks ago at Momax but dunno if you'll like the design or not
Click to expand...
Click to collapse
Hah thanks man, but i'll stick to the ringke for now, just need a screen protector.

Does it attract alot of dust and fabric when you leave it out or put in your pocket?

Nizzay! said:
Does it attract alot of dust and fabric when you leave it out or put in your pocket?
Click to expand...
Click to collapse
Hmm... just got it for like 24 hrs. so I cannot tell about that yet, but as least from the SGP Store site:
The Premium Silicone case SGP Case Ultra Silke Series Prevetns your mobile from scratchesm damages and dust. Surface is coated with high polymer which reduces dust sticking on the surface, and even makes easier to put in and out of pocket.
Click to expand...
Click to collapse
For me the surface feels similar to the matted part on the back of the "S" Shape TPU case so I guess it *should* be harder to attract dust/lint/oil etc.

Nizzay! said:
Does it attract alot of dust and fabric when you leave it out or put in your pocket?
Click to expand...
Click to collapse
I have the silk for vibrant before. The material does not attract dust and hair at all, unlike silicon. But like all cases, there will be dust deposit INSIDE between case and phone eventually. Now I rock NS naked with squaretrade.

^^^
Just came back from a whole-day normal usage and wanna confirm what he said about the material. It won't attract dust, lint, or hair at all.
BTW, my friend who has seen my Nexus S in the "S" TPU case before said this when he saw my phone today: "Now you've got a good case" xD

suksit said:
^^^
Just came back from a whole-day normal usage and wanna confirm what he said about the material. It won't attract dust, lint, or hair at all.
BTW, my friend who has seen my Nexus S in the "S" TPU case before said this when he saw my phone today: "Now you've got a good case" xD
Click to expand...
Click to collapse
I have the same case and the best thing about it is that it does not attract dust.

I like it, just gotta find out where to buy it in Italy

How well does the case hold the phone? I have one of the platinum cases from best buy now and the phone almost feels loose inside the case, causing it to creak and squeak some. The clips that hold the 2 half's of the case are very weak on the platinum case also and its pretty annoying to have the case come apart in your pocket. So can you tell me how the two compare?
Sent from my Nexus S using XDA App

tohg2 said:
How well does the case hold the phone? I have one of the platinum cases from best buy now and the phone almost feels loose inside the case, causing it to creak and squeak some. The clips that hold the 2 half's of the case are very weak on the platinum case also and its pretty annoying to have the case come apart in your pocket. So can you tell me how the two compare?
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
First of all, it's not a hard case like the platinum case, it is a one-piece case just like other silicon/TPU cases (but with nicer material) so you just push the phone in and it stays there. The case fits perfectly and shouldn't move easily

suksit: You have a I9020 right?
How does it fit in your opinion, couuld this fit/strech on a I9023?
(ordered one already, but will take about another week for it to get here)
Second question is about the sides, I watched a video on youtube by nexedzero on this case with the iPhone 4, and the user fairly easily "flips" the sides after the case is on
= are the sides firm(er) on the Nexus version or the same as in that video?
(search youtube: SGP Ulta Silke for iPhone 4" between 3:37 - 3:56mins)

From the pics it looks like a 2 Peice case. My fault for skimming the description and just looking at the pics. It looks as if there is a seam. To add to the above post. Does the silicone seem more ridgid than others?
Sent from my Nexus S using XDA App

i like it, but last month i buy the S Shape Case already.

FoCsU said:
suksit: You have a I9020 right?
How does it fit in your opinion, couuld this fit/strech on a I9023?
(ordered one already, but will take about another week for it to get here)
Second question is about the sides, I watched a video on youtube by nexedzero on this case with the iPhone 4, and the user fairly easily "flips" the sides after the case is on
= are the sides firm(er) on the Nexus version or the same as in that video?
(search youtube: SGP Ulta Silke for iPhone 4" between 3:37 - 3:56mins)
Click to expand...
Click to collapse
Yes I have a i9020, the fit is perfect so hmm... I guess it *may* have the same issue as Rearth Rinke case here.
For the "flip" issue, yes the sides can be flipped just like the iPhone 4 case, however, I never "flip" the sides from my normal usage -- I think it may be because of the larger gaps (than iPhone's) between the actual screen and the case.
tohg2 said:
To add to the above post. Does the silicone seem more ridgid than others?
Click to expand...
Click to collapse
Nope, it's quite soft actually.

neungs said:
i like it, but last month i buy the s shape case already.
Click to expand...
Click to collapse
สวัสดีครับ ดีใจที่เจอคนไทยโพสต์ในนี้ด้วย

suksit said:
Yes I have a i9020, the fit is perfect so hmm... I guess it *may* have the same issue as Rearth Rinke case here.
For the "flip" issue, yes the sides can be flipped just like the iPhone 4 case, however, I never "flip" the sides from my normal usage -- I think it may be because of the larger gaps (than iPhone's) between the actual screen and the case.
Click to expand...
Click to collapse
OK, lets see how it fits when it arrives, will post some pics
The flipping seemed pretty huge, but hopefully it wont be the same....
Nope, it's quite soft actually.
Click to expand...
Click to collapse
Actually I'm counting on this to make the difference between the SGP and Rearth, more softness & flexibility hopefully compensates the size difference...
tnx for the quick reply

Otterbox alternative?

Okay I would prefer to have an Otterbox for my Nexus S, but apparently they won't be making one. Anyone know of an Otterbox alternative? I already have a silicon case, a TPU case on the way, and a hard case. (The hard case is a generic piece of crap, doesn't have any padding or rubber coating on the inside so the phone gets scratched when it vibrates, etc.)
Im open to suggestions. Willing to spend $25ish.

$25ish... otterbox style cases sell for 40+. But check out the casemate pop http://www.youtube.com/watch?v=Z4auzR3OVB8 it's the best case i could find on the market right now.

Feel free to suggest the $40+ alternatives. If its worth it, a few bucks don't matter to me.
Thanks for the suggestion on Cast Mate, but it doesn't cover the front top area.

Yeah i was in the same predicament, the trident is the only 3 layer case i could find (a la defender)
http://www.youtube.com/watch?v=MenxwxVixGM&feature=channel_video_title but it's not out yet and the makers don't even say when it will be. the best cases you can butyright now are the pop and the seido active x. neither have the glass protector but the pop comes with a crappy scratch protector for the screen, and you can buy it at best buy (which is why i chose it over the active x). if you find one with a glass protector let me know as i am terrified i'm gonna drop my phone screen first on a rock.

themapleboy said:
Yeah i was in the same predicament, the trident is the only 3 layer case i could find (a la defender)
http://www.youtube.com/watch?v=MenxwxVixGM&feature=channel_video_title but it's not out yet and the makers don't even say when it will be. the best cases you can butyright now are the pop and the seido active x. neither have the glass protector but the pop comes with a crappy scratch protector for the screen, and you can buy it at best buy (which is why i chose it over the active x). if you find one with a glass protector let me know as i am terrified i'm gonna drop my phone screen first on a rock.
Click to expand...
Click to collapse
The Trident Cyclops? Its out: http://www.tridentcases.com/product_52_67.html
EDIT: I was about ready to buy this phone until I saw in that video review that the screen protector isnt a perfect fit to the curved design of the nexus...

its not out the buy now button takes you to a preorder now page. and it isnt a perfct fit because of the curve, it can probably be adjusted for with some scratch protectors on the glass to make it a tighter fit.

It's showing that the Trident Cyclops is available on amazon.
http://www.amazon.com/Trident-CY-GN..._1_3?s=wireless&ie=UTF8&qid=1303943168&sr=1-3

I own the Trident Case, and I have no issues with the screen cover not matching 100%.
There may be a slight gap between the screen cover and the phone itself, but it is minuscule at worst. I have yet to have an issue with the touchscreen not working because of this 'gap'.
The case is pretty sturdy overall, the only real gripe I have against it is the plastic cover over the rear-facing camera reflects a fair amount of flash, distorting pictures. I had to remove it to take a decent picture.
Hope this helps.

Thank you for the feedback. It does help. I will probabaly go for the Trident case unless a better alternative is given.

No worries.
I should also mention that the silicon ring around the outside of the shell is very grippy stuff. Which means it will stick to the inside of your pockets and such.
Sent from my infin1ty Nexus S using XDA Premium App

May I ask where you got yours from? The one from Amazon ships in "1 to 3 months" and there doesn't seem to be a way to order directly from Trident's website.

I ordered mine straight from their website roughly a month ago. Very pleasant company to work with. I had to call and change my order and they were very helpful. You could try calling them and seeing if they are out of stock or whatnot.
Sent from my infin1ty Nexus S using XDA Premium App

I ordered the trident case yesterday. It said it wouldn't be in stock until 5/11 but I'm ok with that. As far as the screen protector goes, with all of my otterbox cases I've always taken that out and put my own sp on it.
The only benefit of the sp on the case is that it seals your phone from dust.
Can't wait to get mine and see how it feels. Best of luck finding what your looking for.
Sent from my Nexus S using XDA Premium App

donharden2002 said:
I ordered the trident case yesterday. It said it wouldn't be in stock until 5/11 but I'm ok with that. As far as the screen protector goes, with all of my otterbox cases I've always taken that out and put my own sp on it.
The only benefit of the sp on the case is that it seals your phone from dust.
Can't wait to get mine and see how it feels. Best of luck finding what your looking for.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
Did you get your case? How do you like it? Does the phone scratch from the inside of the case since there is no interior soft padding?

http://www.seidioonline.com/product-p/bd4-hkr4ssn2.htm
I bought the Seidio Convert.
Like the otterbox it comes with a holster.
It is actually 2 cases in one.
The 1st case is a thin 2 piece hard shell. Nice for in the pocket.
Then you pop a silicone case over that with an additional hard plastic exo-skeleton that protects the sides and corners.
The holster is much better than the otterbox holster and can even lock the phone in.
Sent from my Nexus S using XDA App

wpghtc said:
I bought the Seidio Convert.
Like the otterbox it comes with a holster.
It is actually 2 cases in one.
The 1st case is a thin 2 piece hard shell. Nice for in the pocket.
Then you pop a silicone case over that with an additional hard plastic exo-skeleton that protects the sides and corners.
The holster is much better than the otterbox holster and can even lock the phone in.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
I bought the same case and I'm pretty happy with it. I find it a little bulky with the full protection and the holster but it's not that bad. I'll come back with pictures.

I just bought that case at bust buy. I hope the inner hard shell case doesn't scratch due to vibration. With all three layers on, it feels like I'm sticking my finger into an oraface.... The outside shell reminds me of fingers. Add that all together and I get the mental image of "what you see you cannot unsee," goatse.
I might have to "circumcise" the rubber lens cap flap so I can do some stealth video/photo shots a little easier. There's nothing more annoying than your flap getting in the way!
LMAO
Now all I need as a home screen wallpaper pic is a shot of someone's "insides" and that would, LOL, complete the whatever. LOL
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

http://www.bestbuy.com/site/Platinu...8335742853&skuId=2553277&st=Nexus S&cp=1&lp=8
This is made by Siedio so it's pretty much exactly the same thing and price is the same too except you can buy it in a store and bypass the waittime on shipping
Whoops, didn't see above post, well there's the link for you to check which BB's have them in stock in case you decided on that one.

herbthehammer said:
I just bought that case at bust buy. I hope the inner hard shell case doesn't scratch due to vibration. With all three layers on, it feels like I'm sticking my finger into an oraface.... The outside shell reminds me of fingers. Add that all together and I get the mental image of "what you see you cannot unsee," goatse.
I might have to "circumcise" the rubber lens cap flap so I can do some stealth video/photo shots a little easier. There's nothing more annoying than your flap getting in the way!
LMAO
Now all I need as a home screen wallpaper pic is a shot of someone's "insides" and that would, LOL, complete the whatever. LOL
Click to expand...
Click to collapse
I am with you on this one. This case is something else. The lady at best buy says the same company manufactures otterbox cases. I saved the receipt, just in case I feel this is overkill in a couple days. Typing the "p" and "q" are a little annoying.
Sent from my Nexus S using XDA Premium App

Ebay case arrived today!!!!!!

Well I only had to swallow my pride for about a day because my new ebay case arrived today after only having ordering it about a day and a half ago so off goes pink and grey and on come white on white. I really wanted a white case since i opted gor the white Note 2 it just didnt seem right to put any other case on it. So here are a few pics. To me I would compair it to a siedio since it is a two piece case consisting of a silica rubber case and a plastic outer shell. The case also has a built in stand for watching movies as well as a holster whose belt clip doubles as a stand as well.
I tried to put the Note 2 with the pink and grey body glove case on it in the holster but it was too loose and would not stay so that lead me to believe that this combo in thick but not by much which equals more protection to me.
The case and holster were only about $12 bucks shipped and it is an unbranded unit but better built then some of the units I have seen that people have purchased off ebay.
I am happy with the case, I may or may not purchase a "Big Name Brand" case in holster in the future but only if it comes in white.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I just got this case in black, it's really very nice. I like that it covers all the buttons and the ports, it really provides some great protection. Having two options for stands is nice too.

Thanks for posting this, I just ordered one myself. I had a few questions if you don't mind. How does the overall fit of the case, is it easy to put on and take back off? How much thicker does it actually make the phone? Does it attract lint/dust when it's in your pocket, or is it too big to carry around in your pocket.

Link to ebay please??
Sent from my GT-N7100 using xda app-developers app

.i ordered a case that had a similar belt clip for my GS2 and i broke the clip...TWICE
please comment on whether or not the belt clip seems secure (if it will snap off easily or not)...both times i broke it i barely even touched it
with a phone this large i can see it getting caught somewhere or banging into something
also...does the phone fit properly in the holster (when the screen is facing out) so that you can actually use the kickstand feature? not the kickstand that is connected to the case...im asking about the kickstand that is connected to the belt holster... the one i bought for my GS2 didnt...it only fit when the screen was faced inwards

Thanks for showing this. I bought the white and black one today. I did consider getting the white only. It looks pretty nice. Thanks for sharing.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

Link to ebay please??
Sent from my SGH-T889 using xda premium

A lot of questions?..........
To all that wanted a few better pictures then what is posted on ebay your welcome.
Unfortunately my work computer will not allow me to look at online auctions so ebay links are out........maybe....wait one
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110973691923
I find the case to be very easy to put on and take of if necessary, fit and finish a very good, as far as lint from pocket, I cannot comment on that one because that why I got a case with a holster.....lol. I dont think it makes the phone that much thicking and its weight is still very minimal.
I have not attempted to put the phone in the holster with the screen out. I had an experience once walking by the ironing board in my bedroom and bumped a metal piece sticking out and a had a wonderful 1 1/2 inch scratch on my beautiful phone but I or someone else will check that out and post it up later.
I do think that the holster clip is the weak link of this whole package. Its is no Otterbox or Ballistic but I have broken my Otterbox holster clip getting into my truck in the past.
I can say that for the cost it is one of the nicest, cheap cases floating around on ebay. I am happy to display my incredibly expensive phablet in it.

bignibb said:
To all that wanted a few better pictures then what is posted on ebay your welcome.
Unfortunately my work computer will not allow me to look at online auctions so ebay links are out........maybe....wait one
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110973691923
I find the case to be very easy to put on and take of if necessary, fit and finish a very good, as far as lint from pocket, I cannot comment on that one because that why I got a case with a holster.....lol. I dont think it makes the phone that much thicking and its weight is still very minimal.
I have not attempted to put the phone in the holster with the screen out. I had an experience once walking by the ironing board in my bedroom and bumped a metal piece sticking out and a had a wonderful 1 1/2 inch scratch on my beautiful phone but I or someone else will check that out and post it up later.
I do think that the holster clip is the weak link of this whole package. Its is no Otterbox or Ballistic but I have broken my Otterbox holster clip getting into my truck in the past.
I can say that for the cost it is one of the nicest, cheap cases floating around on ebay. I am happy to display my incredibly expensive phablet in it.
Click to expand...
Click to collapse
the holster clip is my concern...as you said that you believe it is the weakest link as well...like i mentioned i went through 2 of these on my GN2 (not the same exact one, but the holster clip part looks to be exactly the same) which ended up costing me like $30..that is why im strongly considered getting the Seidio Surface combo..but that is gonna cost me $57..i think i might have to pay a higher premium to get better quality this time around

follow up
does the phone fit properly in the holster (when the screen is facing out) so that you can actually use the kickstand feature? not the kickstand that is connected to the case...im asking about the kickstand that is connected to the belt holster...
The answer is...... It does not go into the holster with the screen facing out. I know that seems kind of weird since it has a kickstand feature but it does not slide into the holster that way.

bignibb said:
does the phone fit properly in the holster (when the screen is facing out) so that you can actually use the kickstand feature? not the kickstand that is connected to the case...im asking about the kickstand that is connected to the belt holster...
The answer is...... It does not go into the holster with the screen facing out. I know that seems kind of weird since it has a kickstand feature but it does not slide into the holster that way.
Click to expand...
Click to collapse
lol yeah...design flaw...i remember when i emailed the guy i bought it from he was like "just apply pressure and force it"...i was like..umm no lol

Is the rubber thick around the top and bottom? Is the rubber soft or more tpu like? Can I get a close up pic of the rubber thickness off the phone?
thanks
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

Search ebay: WHITE RUGGED CASE & BELT CLIP HOLSTER KICKSTAND FOR SAMSUNG GALAXY NOTE 2 II
Forum wont allow links..

sl5400 said:
Search ebay: WHITE RUGGED CASE & BELT CLIP HOLSTER KICKSTAND FOR SAMSUNG GALAXY NOTE 2 II
Forum wont allow links..
Click to expand...
Click to collapse
They are all the same pics. I want to see actual pics.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

oh gawd that (3rd pic) is freakin ugly... someone had to say it congrats on your new protection tho

.....
boodies said:
oh gawd that (3rd pic) is freakin ugly... someone had to say it congrats on your new protection tho
Click to expand...
Click to collapse
It's the back side of the holster..........
I have nothing more to say......lol
Is the rubber thick around the top and bottom? Is the rubber soft or more tpu like? Can I get a close up pic of the rubber thickness off the phone?
The rubber around the top and bottom is the same as it is on all sides, no extra padding in possible problem areas. The rubber is soft which should give some shock absorbtion as well as bounce if dropped on a hard surface (may I never need to know)
I will try to post a pick of it later.

Otterbox Commuter case for the galaxy note 2

I got some pictures of the latest Otterbox Commuter case for the galaxy note 2 from Android forums >
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-
-
-
-
-
-
-
-
thanks to the original author who toke this pictures
note : I do not own this case because I live in the third world (no way to buy it or even to ship it to Algeria) if you want to know more, follow the source link >
Source
A very good review about the Otterbox defender case (useful to decide whether your priority is to protect the phone from all kind of drops or just to add some protection without much bulk) https://www.youtube.com/watch?v=l_c0tWkBhDA&feature=youtube_gdata_player
The longest, most detailed video about the commuter case https://www.youtube.com/watch?v=rJpcPC-88LI&feature=youtube_gdata_player
A video about comparing the two Otterbox cases, the commuter vs defender https://www.youtube.com/watch?v=JsPFLcpOFUs&feature=youtube_gdata_player
A video about the white commuter case https://www.youtube.com/watch?v=CzDGAmVdXQQ&feature=youtube_gdata_player
More pictures of the commuter case on a note 2:
gpgalanis said:
Our beautiful Notes 2 with the Otterbox Commuter cases on. Best case in my opinion.
Click to expand...
Click to collapse

I wonder when this will be available in stock. Really need one for my precious.

Hi
Thanks for posting pics.
I am now thinking of getting this case, but I have some questions.
It looks really thick, is the thickness of the Note 2 doubled or less than doubled?
How is the grip ? does it slip off your hands easily?
thanks

Hi,
Well sir, as i said in the op, i don't really own one i hope that i can get one someday ^_^
This case as lots of people noticed, is less bulkier than the defender case from the same manufacturer, and it delivers almost the same protection. The main difference you'll notice is a couple of millimeters less and no plastic screen protector (a simple screen protector is supplied instead)
I don't really know how much is the thickness after applying it, but it shouldn't bother you if you are planning to protect your phone.
Best regards
Sifou
Using a Samsung N7100

I also ordered it in glacier color.

Just got mine, great so far. Doest add that much bulk surpringly. The rubber part is much better than previous models, doesn't pick up lint as much. Very glad I got it!
Sent from my SCH-I605 using Tapatalk 2

I also have the commuter and find protection wise it is pretty good, however I find the outer part abit on the slippery side, and the buttons abit harder to press. I have owned a Ballistic SG for my older SG2X which I found offered good protection as well, but abit less slippery and buttons were easier to press, but did not offer port closures.
Does anyone who currently owned/tried both the commuter and ballistic case for the note 2 care to comment if the Ballistic offers similar protection to the Note 2 as well as easier to press buttons?
I am considering switching if the Ballistic offered similar/better shell protection with easier to press button... or I may add a flygrip to the commuter (not sure if it would attach well to the commuter.... has anyone added anything to their commuter to make it less slippery?).... or some other similar alternative case you'd recommend?

artofwar said:
I am considering switching if the Ballistic offered similar/better shell protection with easier to press button... or I may add a flygrip to the commuter (not sure if it would attach well to the commuter.... has anyone added anything to their commuter to make it less slippery?).... or some other similar alternative case you'd recommend?
Click to expand...
Click to collapse
The slippy part is the only thing I don't like about the Commuter for the Note 2 bc it also has rounded edges so makes it even worse. I am considering black skate tape which might do the job or this other grip product designed for cellphones (forgot the name so have to dig).
Anyone do any type of MODs on their Commuter? I would be interested in hearing what.

I was thinking about grip earlier today for mine. I think grip tape would be easy but alittle rough for my liking. Maybe some kind of non slip stickers like the ones you can put on your dash to prevent slip. I maybe even the rubber of a ping pong paddle.?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

I have the Commuter series case for my Note II and am actually very happy with it. I've owned Commuter cases for both the GALAXY S III and the GALAXY S II LTE (Skyrocket) in the past, and this is by far my favorite design. Unlike some of the Commuter cases, this one doesn't make the buttons hard to press at all -- they retain their tactile feedback and make a resounding click when pressed which is nice, and it's pretty easy to install and remove (so if you're a flash-a-holic and pull your battery or whatnot, it's not a complex procedure to pull off).
The silicone material feels different too -- almost has a slight leather texture to it -- but lint doesn't stick to it and if dirt or dust gets on it, it's a lot easier to clean off.

Mine arrived today.. too bad my phone glass broke yesterday, yeah.. im not kidding.
Ill change it tomorrow and it will cost 290$ with service included. This time with the case and screen protector from otterbox

krwkenn said:
I have the Commuter series case for my Note II and am actually very happy with it. I've owned Commuter cases for both the GALAXY S III and the GALAXY S II LTE (Skyrocket) in the past, and this is by far my favorite design. Unlike some of the Commuter cases, this one doesn't make the buttons hard to press at all -- they retain their tactile feedback and make a resounding click when pressed which is nice, and it's pretty easy to install and remove (so if you're a flash-a-holic and pull your battery or whatnot, it's not a complex procedure to pull off).
The silicone material feels different too -- almost has a slight leather texture to it -- but lint doesn't stick to it and if dirt or dust gets on it, it's a lot easier to clean off.
Click to expand...
Click to collapse
yah I agree with you this is way easier to take off and put on better then the s3 ones I love mine I have the black one with my gray note 2
Sent From My SCH - I605 Rooted Unlocked Bootloader Running Clean Rom 3.5 Red Theme Using Xda Premium

I had mine for about a week now. Can you guys see if your case feels loose at the corner near the volume buttons? Mine just doesn't seem to fit tight enough.

scoobmd said:
I had mine for about a week now. Can you guys see if your case feels loose at the corner near the volume buttons? Mine just doesn't seem to fit tight enough.
Click to expand...
Click to collapse
mine is a little lose but not real bad
Sent From My SCH - I605 Rooted Unlocked Bootloader Running Clean Rom 3.5 Red Theme Using Xda Premium

Zacedward said:
yah I agree with you this is way easier to take off and put on better then the s3 ones I love mine I have the black one with my gray note 2
Sent From My SCH - I605 Rooted Unlocked Bootloader Running Clean Rom 3.5 Red Theme Using Xda Premium
Click to expand...
Click to collapse
I like how you don't have to try to put the phone and silicone in the hard plastic a certain way or pull on the plastic in order for it to line up 100% correctly; with the S III I found that the power button was pretty hard to press and had almost no feedback to it (same thing on the S II Skyrocket case as well, but that's to be expected since they used almost the same design case wise).

scoobmd said:
I had mine for about a week now. Can you guys see if your case feels loose at the corner near the volume buttons? Mine just doesn't seem to fit tight enough.
Click to expand...
Click to collapse
I received the Commuter case today and my silcone also feels loose around the volume button area. It is also slightly loose above the the power button area. I don't think it is down to the inner silcone layer being too big or loose, rather the fact that the hard outer case shell doesn't wrap around on that part. This means the silcone has no support unlike the ends of the case where the outer shell wraps around and offers support and keeps it tight.. A bad design really.

My case is also as you say loose since the outer shell doesn't support the silicon there but this isn't really a problem for me. Actually I believe that this is by far the best case so I also ordered a spare one.

The silicon on top of the power button is a little lose as well. I tried the hair dryer trick to form it to place which made it fit a little tighter.

I had one last week but returned it within 24 hours. Too bulky, also more slippery than the original Samsung TPU case. I hope they change the grip on the back. Also the back does not really need to be so thick. I want a little more thickness to the bottom and top, because these are the areas than hit the ground first most of the time when the phone is dropped. The screen protector is not that good either. Not worth £30 that I paid for it.
edit:
the bottom flap also is very stiff and it pushes the usb connetor when it's plugged.

I kind of wish they went with a square design instead of rounded edges, would probably help the grip on the back too :crying:

MYBAT Jolt Case mini review - amazing case for only $6

I'm not that great at prose. Bullet points for all of you!
Bought from here. Also comes in white and red.
Notes:
The great big DANGER sticker and Big Scary Laser sticker is something I bought separately.
Pros:
It's 6 freaking dollars!
Does not feel cheap
Volume/power buttons retain their 'click'
Reasonable protection
High lip for drop protection
Lip does not impede touching the edge of the screen
Stand actually useful (comfortable angle)
Slippery enough to slide into my pocket, grippy enough to comfortably stay on a table
Does not attract fingerprints at all
Fit is very tight, phone absolutely won't come out on its own
Feels comfortably rugged but not ridiculously so
Would not be afraid to drop the phone whilst in the case
Cons:
Volume/power buttons have very little definition on the case, very easy to accidentally press volume down whilst holding the phone
Stylus cutout could be a tad bigger
Larger headphone connectors may not fit
Larger microUSB connectors may not fit
Can be a little fiddly to get the phone out of the case due to tight fit
Neutral:
Stand only has one angle (I like it for the simplicity, but each to their own)
Stand feels a little flimsy (I don't think it will break unless someone smacks the phone down whilst standing)
No dust covers on the jacks (I personally like this as I hate having to remove dust covers when I want to plug anything in)
Wrapup:
For $6 shipped I couldn't be happier.
Unless I find something hugely better or the otterbox commuter drops in price by $20, I'm sticking with this.
Pics:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I've got the same case, modded it to use with my flip cover and it works great. With the flip cover on I can fold it back and prop the stand on it or it lays flat in front like a keyboard on a laptop. The only problem I have with it is the kickstand is a bit flimsy.
I like to break stuff!

-EViL-KoNCEPTz- said:
I've got the same case, modded it to use with my flip cover and it works great.
Click to expand...
Click to collapse
I think I might give this one a go - can't say no to extra protection!

montymintypie said:
I think I might give this one a go - can't say no to extra protection!
Click to expand...
Click to collapse
I put the flip cover on, then put the case on and marked it just 1mm-2mm from the top and bottom of the flip cover then removed the case and cut it down to the little groove along the back edge, then cut along the groove. Afterwards I sanded the back edge with 200-1800 grit sand paper and it looks factory finished now.
I like to break stuff!

-EViL-KoNCEPTz- said:
I put the flip cover on, then put the case on and marked it just 1mm-2mm from the top and bottom of the flip cover then removed the case and cut it down to the little groove along the back edge, then cut along the groove. Afterwards I sanded the back edge with 200-1800 grit sand paper and it looks factory finished now.
I like to break stuff!
Click to expand...
Click to collapse
I don't quite read you... Pics?

Monty, i found one exact replica of the Otterbox Commuter for $5 and mod it to have a thin kickstand.
http://forum.xda-developers.com/showthread.php?t=2153383
I spliced in the kickstand from a $9 TPU casing. The point is it's more protected from drops & has a functional stand without the $70 cost from where I come from.
Sent from my HTC ChaCha A810e using xda app-developers app

TheNeighbor101 said:
Monty, i found one exact replica of the Otterbox Commuter for $5 and mod it to have a thin kickstand.
Click to expand...
Click to collapse
If you can find me an ebay link I'll happily buy some to experiment with!

montymintypie said:
If you can find me an ebay link I'll happily buy some to experiment with!
Click to expand...
Click to collapse
Sorry, mate. I could only find it in a kiosk shop chain here called Swisstech. Nothing online.
SG Note II rooted with stock 4.1.1

Im pretty sure THIS is the same case.

Double0EK said:
Im pretty sure THIS is the same case.
Click to expand...
Click to collapse
Correct, it is identical.

Got the same case from amazon for a buck with 5 bucks shipping. Very god review and I agree with all of it.
Pics of the models version would be awesome.
Sent from my SAMSUNG-SGH-I317 using xda premium

Im uploading some pics of the case and flip cover now, will take some with them on the phone when my wife gets home so I can use her phone camera
I like to break stuff!

Anyone with the white case notice a halo when taking flash pictures?
Sent from the TermiNOTEr 2!

I just received my uag scout case and then I see this thread. Blast. The uag case is nice. Fit is not a hundred percent but protection feels good. What it is, is not worth 39 that I paid for it. This case looks like it would offer similar level of protection to the uag case. Anybody compared the two? Might get it to cutout the back to allow for better charging wen I finally get around to performing the induction charging mod.

I like to break stuff!

I'll post pictures on the phone soon, either tonight if I can get decent pics with my wifes photon on weds when I get home and have my 2nd note I can put the case on and take pics
I like to break stuff!

I just got the same one. It's tight. No pun intended.
Sent from my SGH-T889 using xda app-developers app

The only thing to be careful with on this case is the inside edges are pretty sharp, at least on mine, and scuff up the edges of the phone. The reason I don't use it on my new note.
Sent from my Note II

asmd6230 said:
I just received my uag scout case and then I see this thread. Blast. The uag case is nice. Fit is not a hundred percent but protection feels good. What it is, is not worth 39 that I paid for it. This case looks like it would offer similar level of protection to the uag case. Anybody compared the two? Might get it to cutout the back to allow for better charging wen I finally get around to performing the induction charging mod.
Click to expand...
Click to collapse
Sorry, but in terms of quality these are in a different category. Two months ago I said to myself after getting a handful of ebay cases - hey they all cost as much as one of the premium one. Then, I compared it to those from UAG, Case-Mate, and Otterbox - and the quality and fitment of ebay cases was pale in comparison. They will offer a similar level of protection, I will not deny that. But you will see how brittle plastic material is, how hard to push volume/power buttons, how flimsy and stretchy silicone inserts, how poorly inner/outer shells interconnect, how flimsy kickstand is, the silicone/plastic gets a blue shade from your jeans pocket, and how poor some of the port openings are. Regarding price of UAG - that's expected when a brand new product is released and there is such a high demand for it, thanks to a great reputation of their S3 cases.

Here's pics of it on the phone itself
I like to break stuff!