Should I break the tab off the back cover? - Motorola Droid 4

I really hate that tab . But if I break it off... will the back cover stay on and I can just easily remove it from now on without the tool/pin/pen/ect.?

Try it? A replacement cover is pretty cheap. Just make sure you order one first.
Report back once done.

The whole purpose of asking was to try it without requiring a new back cover

smile_ppl said:
I really hate that tab . But if I break it off... will the back cover stay on and I can just easily remove it from now on without the tool/pin/pen/ect.?
Click to expand...
Click to collapse
So then break it off. If it works then great if not then get a new one.
Sent from my DROID4 using xda premium

smile_ppl said:
The whole purpose of asking was to try it without requiring a new back cover
Click to expand...
Click to collapse
If that were the case, nobody would ever get anything done. Stop being a part of the ME generation and be a pioneer!

640k said:
If that were the case, nobody would ever get anything done. Stop being a part of the ME generation and be a pioneer!
Click to expand...
Click to collapse
You know how to recognize a pioneer, right? They're the ones laying face-down on the prairie with arrows in their backs.

works fine
I just pioneered it.
it works fine and seems tight enough. You drop your phone and it's going to go flying though

kahnvex said:
I just pioneered it.
it works fine and seems tight enough. You drop your phone and it's going to go flying though
Click to expand...
Click to collapse
Same here. I just got a D4 yesterday. Tried to get the back off to insert my memory card, failed with a pen and with a paper clip (no key, or whatever they call it, was included), took it to Verizon where they opened it up. They seemed surprised that that was all I wanted, haha. Didn't actually buy anything. Just walked out with the back cover and phone in separate hands. Inserted the card when I got home, searched to see if anyone had ever just broken that damned thing off, found this thread, did it myself...success! The back cover now works just like any normal one. It's as secure as the cover of my LG Revolution, or more, and no more hassle or ridiculous key to keep track of. And actually, I think because of the way the little hooks slide in, it's less likely to go flying off when dropped than the Revo's is.

You don't need a key anything to poke in the hole. Just finger nails to push along the top seam. Cover comes off quite easily.

Have you tried just pressing with all your fingers on the center of the cover and sliding down? I was at verizon today and thats what the lady who helped me did. Works just fine. I dont think ill ever stick anything in the hole again.
Sent from my DROID4 using xda app-developers app

I wonder if the precision with which the back is made isn't great so that different phones vary in the ease of opening. For me it didn't matter where I applied pressure, it just wouldn't open. And believe me, I tried it everywhere, and held in one hand, two hands, laying flat on a table, etc. But yeah, at least on mine it doesn't seem to need the tab at all. The back is still very secure without it.

Related

Mother of fail: battery cover?

I just realized how difficult it is to open the battery cover after you've inserted the battery. Anyone having trouble with it or am I just a huge failure? I don't want to push and wrench away at it in fear of breaking the thing, what with it being plastic.
grainysand said:
I just realized how difficult it is to open the battery cover after you've inserted the battery. Anyone having trouble with it or am I just a huge failure? I don't want to push and wrench away at it in fear of breaking the thing, what with it being plastic.
Click to expand...
Click to collapse
Try applying pressure nearer to the bottom of the phone and push away from you. You scaredy cat
Yeah, you have to apply pressure at the right place (at the center near the bottom) but it can be really difficult to open sometimes. At first I thought I'd get a spare battery to be able to switch when one is empty, but I can't see myself opening the phone every other day, I'm pretty sure I would break it eventually...
Stea1thmode said:
Try applying pressure nearer to the bottom of the phone and push away from you. You scaredy cat
Click to expand...
Click to collapse
Every time I apply pressure it makes this sound like it's about to break. D: And I keep getting the feeling I'm going to crack the screen. I'll flash damn near anything all day long, but breaking the thing physically scares the daylight out of me.
No success, btw. Either I'm not pressing in the right place or not pressing hard enough. Swear to god I opened the thing multiple times the first day I got it (after the battery was in, no less) since I got the SIM card in the wrong way. Now it's tight as... well, very tight. Plastic isn't supposed to expand, damn it.
grainysand said:
Every time I apply pressure it makes this sound like it's about to break. D: And I keep getting the feeling I'm going to crack the screen. I'll flash damn near anything all day long, but breaking the thing physically scares the daylight out of me.
No success, btw. Either I'm not pressing in the right place or not pressing hard enough. Swear to god I opened the thing multiple times the first day I got it (after the battery was in, no less) since I got the SIM card in the wrong way. Now it's tight as... well, very tight. Plastic isn't supposed to expand, damn it.
Click to expand...
Click to collapse
the trick is to handle the phone at its sides, that way you wont risk breaking your screen. So apply preesure at the sides of the battery door and push with both thumbs.
Here's how to do it properly.
Hold the phone, using both hands, between index fingers and thumbs, so that the thumbs are just above the silver (engraveable) strip in the back. Bring the thumbs in toward the center line of the phone.
Angle your index fingers a bit, so that the pressure is applied not at the screen but the edges of the device. Curl the index fingers so that the upper half of the fingers are pointing toward your body and are positioned alongside the edges of the device.
Now, with your thumbs, push in and up. It helps if fingertips are nice and dry
I get the very same feeling of just how fragile it seems to be when trying to pop the cover off
This is not a problem I've ever had. It just slides off; what the heck are you people trying to do to your poor battery covers? ^_^
danguyf said:
This is not a problem I've ever had. It just slides off; what the heck are you people trying to do to your poor battery covers? ^_^
Click to expand...
Click to collapse
Harry, it's only a problem for the original poster
Guess I'm just a clumsy ****. It kind of moved a little bit when I tried what you guys said, but otherwise unless I'm willing to go at it with my nails, I should probably ask someone else to do it.
On the other hand, no dust under my screen! The tightness of the battery cover might as well be why.
I find sticking your fingernail in the little slot where the speaker is and dragging back from there helps. I also get the feeling im going to crack the screen when im pressing hard on the phone, its scary stuff!
Try this, hold your phone in your left hand facing down with your index finger and thumb just on the sides of the phone just above the capacitive buttons. Then place the ball of your right palm on the back of the cover and push up while applying a little force, it should open pretty easily.
nDrg said:
Try this, hold your phone in your left hand facing down with your index finger and thumb just on the sides of the phone just above the capacitive buttons. Then place the ball of your right palm on the back of the cover and push up while applying a little force, it should open pretty easily.
Click to expand...
Click to collapse
YES. This did the trick fantastically. It seems so simple now, I've no idea how I kept doing it wrong.
? You've read P 18 of the user guide ?? Nice wee diagrams... they work for me...
http://www.google.com/googlephone/nexusone-userguide.pdf
(In other words, RTFM ?? - no offence intended ...)
Cheers!
Lodger
I rarely, if ever, read manuals. But it's not as if I had trouble removing the battery cover the first day (especially since I had to do it several times as my SIM card was inserted the wrong way in).

Taking the battery cover off my HD2?

Hello, I have still yet to take the battery cover off my HD2 since it's brand new, and I need to know the least effortless way to take it off without damaging. I have tried with the little slot by pulling up on it but haven't tried very hard and it never comes off. I'm afraid of breaking it.... Help?
Do a Google search on
"remove battery cover hd2"
PurpleLlamaLover said:
Hello, I have still yet to take the battery cover off my HD2 since it's brand new, and I need to know the least effortless way to take it off without damaging. I have tried with the little slot by pulling up on it but haven't tried very hard and it never comes off. I'm afraid of breaking it.... Help?
Click to expand...
Click to collapse
Yeah, you've got the right idea there...it's built to have tension so it takes a bit of effort to get it open. First, that little slot is indeed for your nail to help pop it open...now, when you pull on it, do it as if the opposite side (with the volume buttons) is a hinge, and the door needs to swing open like that. I place one of my thumbs on the "hinge" side, and pull up on the other. Once it snaps up about an inch, I lift my thumb and it comes right off. Putting it back on is the exact opposite...first seat the side with the volume buttons securely (this takes some practice), and then swing it closed and snap down on the notch side.
Ugh, that sounds really difficult. This is actually making me regret my decision of buying the HD2. I love everything about it but this stuipid battery cover. Why couldn't it take up the entire middle-bottom of the phone!
http://www.youtube.com/watch?v=SfemA_G2QYA
Thanks, but I can't view the movie. Shows up as a white square...
don't worry about it really, your finger isn't going to damage the metal battery cover. it just pops right off.
i hold the phone with my right hand on the top and bottom and push the slot with my left thumb, easy peasy.
I'm not worried about the battery cover, just the phone. I've had it since Wednesday and have been phoneless for the past 2 weeks...
Just pull on it its not going to damage your phone, I do it every day.
Its really not that hard to do, you're making it a bigger deal than it actually is. Its made out of metal so I think you will be ok.
come on purple lama lover! just do it; don't be a pink lama
This thread, coupled with this post from another thread:
PurpleLlamaLover said:
I'm very meticulous when it comes to cosmetics. At night, when I'm not using my phone I wrap it in a lint free sunglass cloth, then in a layer of bubble wrap, then in a small bubble wrap lined packaging envelope, then in a larger bubble wrap lined shipping envelope, and then in a prefectly sized cardboard box that I put very carefully in a drawer. Lol, but the case and all it's openings fit perfect.
Click to expand...
Click to collapse
Makes me believe that you may need to see a doctor. Your worries are baseless and way too superficial.
You're regretting buying the HD2 because of the battery cover? For real? Definitely don't get an evo then. That one feels like it could snap at any moment when you try to take it off. At least the HD2's is metal.
This is a joke, right? How are you going to damage a metal battery cover? What are you using to take it off, The Jaws of Life?
Just take it off. You won't damage it at all. I know it feels like its just going to rip apart but the HD2 can take it
Guys, Please don't feed the troll.
FlawlesStyle said:
This thread, coupled with this post from another thread:
Makes me believe that you may need to see a doctor. Your worries are baseless and way too superficial.
Click to expand...
Click to collapse
WOW...if it rings your wouldnt even be able to hear it much less get it out in time to answer the call...
PurpleLlamaLover said:
Ugh, that sounds really difficult. This is actually making me regret my decision of buying the HD2. I love everything about it but this stuipid battery cover. Why couldn't it take up the entire middle-bottom of the phone!
Click to expand...
Click to collapse
"UGHH thats difficult".....This guy / gal is really sad
LOL... This is hilarious!
This is what works for me
1) Phone face down
2) Stick your fingernail in the bottom left corner of the metal cover and lift it up. Voila.
Pocketnow technique didn't really work for me. Almost felt like I was going to break it.
There seriously is a thread about how to remove the battry cover???
I cant belive i just wasted my time in reading it WOW!!!!

Raider digitizer glass shattered, anyone know the proper way to install a new one?

Yes, I already broke my phone. Go ahead, grin and chuckle..now that you've gotten it out of your system, anyone want to offer a little guidance? Never disassembled a newer cellphone before. New glass is ordered and has been shipped, just waiting for it to arrive. I'm hoping the process is fairly simple. I do have a specialized set of screwdrivers with all the hard-to-find bits, so that's not a problem ..it even has the tiny blackberry bit.. but from what I can see HTC uses standard micro Philips screws. Yay for standard formats!
Sent from my HTC PH39100 using xda premium
If this phone is anything like hd2 you're gunna want the flat pry tools they sell (search hd2 screen replacement tools). Their not needed but a nice handy thingy to have, other wise you might crack your LCD from flexing it too much.
Sent from my HTC PH39100 using XDA App
I wont grin and chuckle too much, I broke my Atrix after 4 days.
The Vivid screen seems very fragile. 2 of my coworkers have broken theirs within a few weeks of having them. Small drops from waist distance. Its too bad because I have seen the current Samsung models dropped from 6 feet face first and survive
Sent from my HTC PH39100 using xda premium
Yeah, I've cracked mine as well. If you google HTC raider teardown on YouTube.. There's a vid.... Butttt, it's not in English and it's a teardown not a screen replacement tutorial.
It seems as thought HTC has been using reeeeally thin glass in their devices.
Whered you get the glass? It'd be very thoughtful of you to do a tutorial as you do it. I really want to replacement mine but if you remove one on the screws by the battery it voids your warranty
Send it to HTC then? You get a 1 year warranty when you buy the phone.
Honestly, I think Corning had another incident of releasing faulty glass. I've dropped mine numerous times, from pretty high up and I don't have a single scratch on my phone.
travisxcore said:
Send it to HTC then? You get a 1 year warranty when you buy the phone.
Honestly, I think Corning had another incident of releasing faulty glass. I've dropped mine numerous times, from pretty high up and I don't have a single scratch on my phone.
Click to expand...
Click to collapse
How much is it for them to fix it?
I have no idea. Shoot them an email (not Support Inquiry, youre gonna wanna send it to Repair Inquiry) and they should be able to tell you. Make sure you fill out the S/N box out now, or their just gonna send you an email back asking for it.
travisxcore said:
I have no idea. Shoot them an email (not Support Inquiry, youre gonna wanna send it to Repair Inquiry) and they should be able to tell you. Make sure you fill out the S/N box out now, or their just gonna send you an email back asking for it.
Click to expand...
Click to collapse
I'll do that right now. Thanks alot
(sorry to hijack the thread lol)
They use a double sided tape that hopefully comes with your replacement screen , I tried to replace a water damaged screen and it really wasn't a fun process
Sent from my HTC PH39100 using xda premium
It didn't fall very far..
Yeah when mine fell I had it in a shirt pocket, bent over to pick something up and it slid out, fell about a foot and a half..directly onto the search button corner on ceramic tile. Crunch. I ordered a new panel from tmart.com .. I got a confirmation email back on the 4th saying its been shipped via usps.. should be here soon. I hope it comes with everything I need - cost me about $50.00 with the shipping and everything. I paid the extra 3 bucks for insurance lol..
bproulx said:
Yeah when mine fell I had it in a shirt pocket, bent over to pick something up and it slid out, fell about a foot and a half..directly onto the search button corner on ceramic tile. Crunch. I ordered a new panel from tmart.com .. I got a confirmation email back on the 4th saying its been shipped via usps.. should be here soon. I hope it comes with everything I need - cost me about $50.00 with the shipping and everything. I paid the extra 3 bucks for insurance lol..
Click to expand...
Click to collapse
So, how was the installation process? And did it come with the adhesive? I'm going to buy it from that site as well
And then it was fixed..! FTW!
Ok sorry for the delay getting back to you guys.. been frantically waiting for the screen to clear US customs (ugh) and arrive, which it finally did today. I was able to get my hands on it at about 3 this afternoon, but I wasn't able to actually look at it until about an hour ago..
So.. I open the package, big grin on my face..and the first thing I notice is that the glass is AT&T branded. Funny, considering I'm in Canada and using Rogers..but hey a digitizer by any other name...and all that. So! I open the bag that my "tools" came in.. There are 2 blue plastic tools, one a prying tool and one looked a lot like a guitar pick. Cool. There are also 2 screwdrivers included, and I'm momentarily excited, until I realize they're just tiny torqx bits. The Raider uses TINY philips head screws, so those were useless. I put them into my tiny tool set..for later consideration.
Back to the screen. Looks like it the real deal, so I watch half of the teardown vid on youtube.. As mentioned in an earlier post it isn't an english-language vid so aside from seeing the locations of the screws and the methods of levering off the internal components, there's no exchange of information going on. I would like to mention however that the video kind of glazes over the locations and removal processes for some sensitive connections, so having only experienced laptop repairs personally.. I was in fairly uncomfortable and unfamiliar territory - but I was determined.
I tried several ways at getting the phone down to its base components, and finally succeeded in locating the panel's ribbon connector interface on one of the phone's circuit boards. I had to remove the back of the phone, pull the batt, sim and sd, and pull the 4 main screws that lock the housing down onto the phone.. From there its a matter of levering off the black plastic shell and whats underneath is a whole lot of tech in a very tight space. There were 3 or 4 wires I had to disconnect, about 15 tiny screws in 3 different lengths, and then when all was said and done I had to pry the busted panel off using the supplied blue lever tool (pretty handy, actually.) and then lift the lcd away from the metal housing enough to slide the old connector out and the new one through.. This was a very tricky process - I drink way too much coffee to hold completely steady for long..lol.. Finally got it all through, but by this time I had smudged the inside of both glass surfaces pretty badly and it took some serious mechanical dexterity to hold the surfaces and wipe them down without wrecking any of the flapping, loose circuit boards, screens, etc.. it was a frightening experience.. I won't lie.. I definitely feared the worst possible outcome given my limited experience.
So.. the panel's ribbon cable is inserted, the white clip back down securing it.. I manage after several attempts to remember how to put the puzzle all back together, and after about 45 minutes of messing with it I had a visually complete phone again. I hit power, and miracle of miracles the HTC logo flashes on the screen.. I'm hopeful..
The phone boots up, looks great (aside from a few smudges I missed on the inside..grr) so I start touching the screen and here's where we have the first problem..lol.. its recognizing that I'm touching the screen..but not really accurately.. it seems to be that there are dead areas.. So now I'm thinking I broke something..lol..
Smoke break.
Took it all apart again, forgot to clean the smudges, removed and re-seated all the connections, and about 15 minutes later I had it back together again. I booted it up and waited.
Success!! It sees where I'm touching accurately now - I think the ribbon must have moved while I was putting it back together, I was shifting things a lot as I was trying to figure it all out, so I must have stressed the cable enough to move it slightly in the slot.. that, or I didn't have it all the way in / straight the first time I did it. Either way, it works fine now. I was successful on the 2nd attempt, and now the only difference is that this glass feels..rougher? less smooth? not sure how to describe it.. it feels different, anyway.. and the at&t logo of course. Aside from that, you'd never know it was in pieces an hour ago..lol.
Would I do this again? ..I hope I don't have to. Its not impossible, but man, if you're going to try this BE SUPER CAREFUL!! lol..
edit: and no - it didn't come with the double sided tape, but it seems to be staying without having to replace it.. it wasn't too hard to remove it from the panel, but getting it back on straight took some finesse.. lol.. it comes apart easier now when you're tryingn to disassemble it..but seems to be holding together fine on its own.
travisxcore said:
Send it to HTC then? You get a 1 year warranty when you buy the phone.
Honestly, I think Corning had another incident of releasing faulty glass. I've dropped mine numerous times, from pretty high up and I don't have a single scratch on my phone.
Click to expand...
Click to collapse
Corning makes the glass on the Raider/Vivid?
I would suspect it to be more sturdy if its corning, my SGS has been without a screen protector and still does not have any scratches. Yes i know SGS is Gorilla Glass and this is not but i would think it would be stronger.
@ bproulx
You should take it apart again and make a tutorial . I hope i never have to go though what you did. Knock on wood.
lol..might take it apart again..
So..I have smudges on the inside of the glass. Stupid sweaty fingers. Now I'm tempted to pull it apart again ..but not far enough to make a tutorial lol.. besides.. I'm glad I didn't have a camera on me - you guys woulda had a good laugh at me breaking into a sweat trying to pry loose the glass panel the first time..lol. I know it was already broken but (a) I was trying not to cut myself on it and (b) I was also trying not to break the lcd underneath. Which I believe also has smudges on it. Oi.. I guess I'll have to get in there and clean it. Probably not tonight tho. I'm just glad the thing still works - I was scared I was going to bust something. There are a LOT of little things in there. For the record the CPU looks neat. Its smaller than a sim card, a little bigger than a micro sd. Pretty impressive.
bproulx said:
So..I have smudges on the inside of the glass. Stupid sweaty fingers. Now I'm tempted to pull it apart again ..but not far enough to make a tutorial lol.. besides.. I'm glad I didn't have a camera on me - you guys woulda had a good laugh at me breaking into a sweat trying to pry loose the glass panel the first time..lol. I know it was already broken but (a) I was trying not to cut myself on it and (b) I was also trying not to break the lcd underneath. Which I believe also has smudges on it. Oi.. I guess I'll have to get in there and clean it. Probably not tonight tho. I'm just glad the thing still works - I was scared I was going to bust something. There are a LOT of little things in there. For the record the CPU looks neat. Its smaller than a sim card, a little bigger than a micro sd. Pretty impressive.
Click to expand...
Click to collapse
I've taken apart laptops (MacBooks at all) and successfully reassembled them so I think I'm up to the job. I'm reaaaally thankful that it says AT&T at the top and not HTC like the pic shows (since I'm on att).. Another question though, did you successfully get the "void" plastic piece back over the screw? Because, I want to keep this phone as "under warranty" as possible
Getting better at taking it apart..lol..
Chism87 said:
I've taken apart laptops (MacBooks at all) and successfully reassembled them so I think I'm up to the job. I'm reaaaally thankful that it says AT&T at the top and not HTC like the pic shows (since I'm on att).. Another question though, did you successfully get the "void" plastic piece back over the screw? Because, I want to keep this phone as "under warranty" as possible
Click to expand...
Click to collapse
No, the little void sticker on mine was less like a sticker and more like... glue, with paint on it.. lol.. it just flaked apart when I tried to lift it.. but I wasn't concerned with preserving it. Maybe if u use an x-acto or something like that you can lift it intact..? Let me know how you do.
I started getting some random touch input glitches yesterday, and today they got worse.. then my son spilled hot coffee on me and I dropped my phone on the carpet where it of course popped apart..lol..and then when I booted it back up I had some *major* touch glitches.. it was seeing input higher up than the actual contact point, and just acting real buggy..the phone was lagging.. so I took it apart again, completely.. took my sweet time reassembling it this time - I even got out the micro-fibre cloth and cleaned all the glass, and voila.. this time - its like new. I can already tell its put together right this time, which tells me something wasn't quite right before - I'm guessing I didn't get the ribbon cable seated properly before.. there are a lot of tiny, offset contacts on the end of that little cable. Anyway, I guess the moral of the story is screw warranties, and the more times you disassemble your phone the better you get at it.. lol.. it wasn't anywhere near as intimidating this time around. Felt kinda easy, actually. I think I just psyched myself into thinking it would be hard to do the first time around.
I do miss my original glass tho.. I'm thinking about contacting HTC and ordering an oem panel lol.. this one feels.. grippy. The HTC one felt smooth as silk.. I dunno this one kinda feels more like window glass. Meh.. better than a broken ghetto phone. At least now I can whip it out in public without hanging my head in shame and peeking around to see who's looking at my ugly screen. I never even tried HTC directly..I just googled the part and went with the one with good reviews..
OMFG...FML..
Sooo.. I got angry at my Raider today.. started doing the weird touch input glitches again after a battery pull, got frustrated and slammed my phone down on the table in anger...and.... smash. Brand new panel is now ten times as shattered as the old one was. AND...now the phone won't even light up. AND..it looks like I may have cracked the actual LCD this time.. just a small crack at the very bottom - wouldn't even be visible with the shell on the phone.. but.. I'm not very optimistic. I get absolutely nothing on my screen when I boot the phone, all I get is one haptic "bump" and thats it. Nada.
Sooo... looks like I need a new phone. Again.
Lame.
There goes $600.00
....sigh.
Anyone wanna donate an old android device to a guy who's now really really sad and has no phone? LOL.. why did I give away my legend????
Not giving up my phone!! LOL!
Ok so I decided to try my luck at replacing the LCD as well as the busted digitizer that I just re-broke..lol.. back to tmart, and ordered both. I really wish I could have found the whole assembly pre-built, but the only company I found selling both as a single unit had a minimum order of 5 pcs. Out of my price range for repairs, although with my track record maybe it wouldn't have been a bad idea? lol.. anyway, I just bought both parts from tmart and am still waiting for one of them to show up. The good news is I was able to replace the LCD already. It really is just held in there with tape. Like.. there's nothing really holding it all together..you'd think with all those screws and tabs they could have come up with a better way?? Ah well. I have a display again, but until I can get the digitizer and install it I'm without input.. so I can just watch the phone boot and then sit on my lock screen. Or boot into recovery mode and use the vol and power buttons to mess about.. But why..lol. I'll just wait.
I'm just happy that nothing else seems to be affected. I had my alarm going off still with no screen, so that tipped me off that everything else should still be ok. I won't know for 100% certain til I complete the repair, but it looks promising. I picked up a used HTC Magic (ugh) from kijiji for $80 and it came with 3 batteries, 3 chargers, 3 usb cables, 3 leather cases, and a bunch of other crap in threes. Just so I'm not completely without a phone in the meantime. Overall not bad for $80 but man is this phone slow. I installed a custom rom **THANKS XDA!!** on it and it improved the performance and look of the OS a little, but it lags a lot even overclocked when just typing a text.. I can't wait to get my phone back!!
Aside from the screens, this phone is pretty tough. I slammed that sucker down pretty hard that day.. Cmon HTC - why didn't you give us gorilla glass on a $600 LTE phone!?!?!?!? I wish I could find an aftermarket panel that was made from gorilla glass. That would totally rock!
Yeah, i really wish they would've put gorilla glass on it. I used to have the atrix and ive dropped it on tile floor at least 3 times... Nothing. Keys in the same pocket as phone.. No scratches at all.
I didn't want to try my luck, so I just got a replacement vivid

Tiny bulge under SIM slot after 6 days

I just noticed this evening that I have a little bulge under my SIM slot. The rubber protrudes about 1mm, and is about 1/4" long. It happens to be exactly above where my ring finger rests when I hold my phone, as if my finger (over the past 6 days) has forced the separation. It's nothing a bumper or case won't fix -- but I don't have a bumper or a case.
Hopefully it's an isolated case **He naively says starting at the screen lift on his Nexus 7**
ralexand said:
I just noticed this evening that I have a little bulge under my SIM slot. The rubber protrudes about 1mm, and is about 1/4" long. It happens to be exactly above where my ring finger rests when I hold my phone, as if my finger (over the past 6 days) has forced the separation. It's nothing a bumper or case won't fix -- but I don't have a bumper or a case.
Hopefully it's an isolated case **He naively says starting at the screen lift on his Nexus 7**
Click to expand...
Click to collapse
I dont see it. Can you get a closer picture?
Sent from my GT-P7310 using xda premium
ctowne said:
I dont see it. Can you get a closer picture?
Sent from my GT-P7310 using xda premium
Click to expand...
Click to collapse
Buy specs mate. Or get a better monitor.
Oh nevermind I see it now. I would send it back. He said under so i was looking under. That is more like above it.
Sent from my GT-P7310 using xda premium
Looks like the rubber band warping. Not sim slot.
I ordered a nexus 4 and all I got was bo.
Yeah, that looks like a clear defect. I'd definitely have Google replace it.
I've had mine for over a week. It doesn't have that issue. Thank God.
That's a definite defect. Get a replacement ASAP.
Sent from my Nexus 7
At least it still works mine is lifeless
Hi
Might just be clip on the back cover that hasn't engaged. Can you clip it back in by squeezing the back at that point against the front?
Regards
Phil
PhilipL said:
Hi
Might just be clip on the back cover that hasn't engaged. Can you clip it back in by squeezing the back at that point against the front?
Regards
Phil
Click to expand...
Click to collapse
Nah, it's surprisingly stubborn. I've put quite a bit of pressure trying to "pop" it back into place to no avail. I really do hope this isn't a mass problem. I'm going to do an RMA (also have the rattle & hiss). The next one I'll have a case from Day 1.
Hi
ralexand said:
Nah, it's surprisingly stubborn. I've put quite a bit of pressure trying to "pop" it back into place to no avail. I really do hope this isn't a mass problem. I'm going to do an RMA (also have the rattle & hiss). The next one I'll have a case from Day 1.
Click to expand...
Click to collapse
The rattle is just the plastic lens in the camera related to auto focus, a lot of phones have the same rattle, search for "camera rattle". Hiss is caused by the DC-DC power converters in the phone, it's a known issue with low power equipment such as mobile phones, just do a search for the terms "dc dc converter audible noise". These are not faults, just side effects of the technology that most people will ignore or not notice.
Such is the variable nature of these components you may get another phone that appears better or just the same or even worse, but very likely the rattle will always be there as that is just how the cameras are at rest with nothing powering the magnetic servo of the lens.
Obviously the bulge in the side of the case shouldn't be there, certainly a reason to get it replaced.
Regards
Phil
OP - I finally received my phone yesterday and noticed that I too have the same little bulge. Mine is on the opposite side of the phone. It does look like it's just a clip that didn't engage. However, like you, I tried to push it in to no avail. Since there is nothing else wrong with my phone at all I am holding off on sending it in for an RMA because I'd be afraid to get a phone with worse defects. This one is so minimal that I can live with it. Especially since I REALLY have to look for it to see it.
With that said, I'm contemplating just removing the backing, which I have read is super easy (just remove the two screws at the bottom and the sim tray and it pops off). I was thinking about doing this to inspect that little section to see if something is just protruding a tiny bit that can be easily corrected. I'm going to wait until I see others have successfully removed the backing before attempting it myself.
Just wanted to let you know that you are not alone.
UPDATE: I called Play Support and told the rep about the issue. He said I'm not the first person to have the small bulge and recommended an RMA since it's considered a defect so I went that route.
I returned a Nexus 7 that had the same problem. There was no screen lift, so I hesitated, but after taking the back off and seeing that internal components were pressing the bezel outwards (and the screen had been attached onto the already-bent bezel, leaving the bulgey spot without any adhesive to speak of even if I could get the bezel straight) I decided I didn't want to wait for dust to start creeping in and took it back. Glad I did, my replacement was perfect. Hope you get the same result with a new N4 (whenever they get around to having a new one for you :| ).
Damn I have the buldge to Don't know if i'm just noticing or if it's been there all along. I've decided i can live with the tiny amount of hiss in the ear piece and the camera rattle (which i've been told and believe is normal and not a defect). Can't decide if this is something that'll worsen over time or just live with this in fear of getting a device with worse issues. DOH
marnel47 said:
Damn I have the buldge to Don't know if i'm just noticing or if it's been there all along. I've decided i can live with the tiny amount of hiss in the ear piece and the camera rattle (which i've been told and believe is normal and not a defect). Can't decide if this is something that'll worsen over time or just live with this in fear of getting a device with worse issues. DOH
Click to expand...
Click to collapse
Don't fret. I called Google about this issue since I have it too. The rep told me he had a few reports of this and recommended an RMA for it. It won't get worse but if it does bother you just call and have them send you a new one. The process is really easy. I've done this in the past with other Nexus devices as well. They send you a new one within 3-5 business days and put an auth charge on your card for the full price of the phone. Then, when you get the new phone you put the old one in the box and send it back to them. When they receive the phone they remove the auth hold. This way you are never left without a phone.
Anyone opened theirs up?
Sent from my Nexus 4

Video Die/Burn out?

So, been having the issue where the touchscreen doesn't respond.. fnally did the recovery and put t back to stock and didnt root.. let it run and do its nstalls and then DL'd subway surfers again.played it for maybe 10-15min max and it started doing t agan.. i went ot home screen and back to game and the chararters and items were black and then it had a hard time rsponding like it was sluggish and not reacting.
is it possible the video card or whatever may be "burned" ut or somthn.. nto sure what else to do.. any ideas? and would i call att or who to try and fix/swap out if u think its video?
Zugshad said:
So, been having the issue where the touchscreen doesn't respond.. fnally did the recovery and put t back to stock and didnt root.. let it run and do its nstalls and then DL'd subway surfers again.played it for maybe 10-15min max and it started doing t agan.. i went ot home screen and back to game and the chararters and items were black and then it had a hard time rsponding like it was sluggish and not reacting.
is it possible the video card or whatever may be "burned" ut or somthn.. nto sure what else to do.. any ideas? and would i call att or who to try and fix/swap out if u think its video?
Click to expand...
Click to collapse
Does it do it at other times without playing the game first?
Solarenemy68 said:
Does it do it at other times without playing the game first?
Click to expand...
Click to collapse
Yes.. i thought it might be the game too, but sometimes ill just be swiping through the homescreens, app drawer, and othe rthings. it just doesn't respond.
right now i am testing something. I had/have the S-view flip case on it.. so i took that off and put the stock backing back on it. ive been playing it for a bit and so far nothing.. but.. the phone is also cold as F right now so not sure if its just that the phone hasn't heated up to possibly trip it or if thew s-view case really could be the culprit...
does this sound possible? i am most likely stopping by BB today since still within my 45days and going to possibly try and swap it out, and i think i might stay away from the s-view case.. never really used that screen anyway and the bumper protection is non existent.. haven't dropped the phone and there is already a slight nick on the side just from being in pocket.
I use an Otterbox case myself so i am not sure how an s-view fits. I have found in the past with some case if they have a lip that extends over the edge of the display it can sometimes cause false touches if it is touching the digitizer area on the display. If it touches in more than one spot this could confuse the display in that it does not know if you are tapping, swiping, or pinching.
Solarenemy68 said:
I use an Otterbox case myself so i am not sure how an s-view fits. I have found in the past with some case if they have a lip that extends over the edge of the display it can sometimes cause false touches if it is touching the digitizer area on the display. If it touches in more than one spot this could confuse the display in that it does not know if you are tapping, swiping, or pinching.
Click to expand...
Click to collapse
so the new case (well stock) seemed like it was working and then it still did it. .so just swapped the phone out.. so brand new one.. though it came wiht mi9. wondering now if i should OTA then root. not sure what i should do
Zugshad said:
so the new case (well stock) seemed like it was working and then it still did it. .so just swapped the phone out.. so brand new one.. though it came wiht mi9. wondering now if i should OTA then root. not sure what i should do
Click to expand...
Click to collapse
Definitely root first with RDLV. Once you take the OTA you run the risk of the bootloader being patched and can potentially screw yourself out of a chance of getting a real recovery in the future.
Sent from my SM-N900A using Xparent Red Tapatalk 2
Zugshad said:
Yes.. i thought it might be the game too, but sometimes ill just be swiping through the homescreens, app drawer, and othe rthings. it just doesn't respond.
right now i am testing something. I had/have the S-view flip case on it.. so i took that off and put the stock backing back on it. ive been playing it for a bit and so far nothing.. but.. the phone is also cold as F right now so not sure if its just that the phone hasn't heated up to possibly trip it or if thew s-view case really could be the culprit...
does this sound possible? i am most likely stopping by BB today since still within my 45days and going to possibly try and swap it out, and i think i might stay away from the s-view case.. never really used that screen anyway and the bumper protection is non existent.. haven't dropped the phone and there is already a slight nick on the side just from being in pocket.
Click to expand...
Click to collapse
Ive noticed that some games just genuinely do NOT like the 1920x1080 resolution and the buttons have very small sections that actually work. A few games require me to use the s-pen to actually tap the buttons to go through menus. thought my digitizer was having issues until i found out almost everything else works perfectly in those same spots.

Categories

Resources