No safestrap with charger? - Motorola Droid 3

When I have the charger plugged in and the phone off the phone will skip safestrap and go straight to the stock boot logo and boot loop. If I pull the battery then unplug it and power on if works fine.
I'm on safestrap 2.01
Also how do I get Google now to work? I've downloaded it from mikey6 and flashed it but it doesn't work 100% so I'm not sure if hash has a better one I don't know about.
I'm running A4.
Sent from my XT862 using xda app-developers app

That's a known bug with SS2.1. Unplug the charger until you see the boot screen.
Sent from my XT883 using xda app-developers app

Missed that issue, but yeah thanks.
Sent from my XT862 using xda app-developers app

Related

Galaxy Tab P1000 stuck on Downloading... !!!

hey
suddenly may tab p1000 wont boot, what happened is i left it to sleep, woke up and found a yellow android logo inside a warning Triangle, i pressed power button then it turned off and never started again
any idea what happened?
UPDATE
It started but stuck on: Downloading... Don not turn off Target!!!
Get it fully charged.
Hopefully you can flash stock firmware on it. Your data are likely gone though.
Sent from my GT-I9300 using xda app-developers app
thank you priyana
but it turns off it self every time yellow android appears, keeps doing it always
Hold power button for a while then it will power off.
Sent from my GT-P1000 using xda app-developers app
panpjp said:
Hold power button for a while then it will power off.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
At least 10 seconds - and once you're sure the device is off, connect it to your charger (wall plug) and visit it in a few hours and see if it turns on normally again, or maybe even check for the "charging" animation and see if it's charging/full.
After turning it off and charging, if you are unable to reboot, then flash a stable gb firmware.
Mesho Arc said:
hey
suddenly may tab p1000 wont boot, what happened is i left it to sleep, woke up and found a yellow android logo inside a warning Triangle, i pressed power button then it turned off and never started again
any idea what happened?
UPDATE
It started but stuck on: Downloading... Don not turn off Target!!!
Click to expand...
Click to collapse
Is it the android mining coal screen? Use Odin from p1010 noob guide. And PIT file.
Sent from my HTC Desire using xda app-developers app
panpjp said:
Is it the android mining coal screen? Use Odin from p1010 noob guide. And PIT file.
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
Using a P1010 pit file on P1000? Are you serious? You have tried this yourself?
Sent from my GT-P1000 using xda app-developers app
priyana said:
Using a P1010 pit file on P1000? Are you serious? You have tried this yourself?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Yes I'm not joking. This is the only way to use Odin with p1000. Don't waste time downloading those craps from the bull$hit hotfile.com thingies (I wasted more than half an hour Googling furiously.)XDA surely will help ya. Then after finding this it works like a charm, believe me. Tried it
, only prob is tab auto shutting down sometimes, look at my another thread in Q&A section and please reply to that.
Sent from my HTC Desire using xda app-developers app
That is not the only way.
I have used Odin few dozen times with P1000 pit file from overcome GB stock safe.
Never I heard using P1010
P1010 is a WiFi only device.
Sent from my GT-I9300 using xda app-developers app
priyana said:
That is not the only way.
I have used Odin few dozen times with P1000 pit file from overcome GB stock safe.
Never I heard using P1010
P1010 is a WiFi only device.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Hmmmmmmm...... new discovery :beer:
Sent from my HTC Desire using xda app-developers app
Sorry. I just doubt P1010 has compatible pit file.
It doesn't even have a radio/modem/baseband.
One of the partition we have is for baseband.
Do have in mind that yours is now acting funny, I can't say your using P1010 pit is solid.
Sent from my GT-I9300 using xda app-developers app
priyana said:
That is not the only way.
I have used Odin few dozen times with P1000 pit file from overcome GB stock safe.
Never I heard using P1010
P1010 is a WiFi only device.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Have you experienced any shutdowns when turning off screen? It happens every time to me if i open wifi then press screen off.
Sent from my GT-P1000 using xda app-developers app
No, it has never happened to me before. Maybe try to get logcat.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Sorry. I just doubt P1010 has compatible pit file.
It doesn't even have a radio/modem/baseband.
One of the partition we have is for baseband.
Do have in mind that yours is now acting funny, I can't say your using P1010 pit is solid.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I now used the pit from Overcome safe stock and its rom and the prob is still there (seen your another comment, just telling.)
Sent from my GT-P1000 using xda app-developers app
Did you undervolt your CPU by any chance?
Sent from my GT-P1000 using xda app-developers app
priyana said:
Did you undervolt your CPU by any chance?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
No, not rooted ,seems solved. My new discovery is that it will shut down when battery is lower than +-30. Currently it is 40 and no shutdowns at all :fingers-crossed:
Sent from my HTC Desire using xda app-developers app
My Samsung Galaxy TAb GT-P1000 is not starting after firmware upgradation faild
anyone can help me to make my galaxy tab P1000 start as i was downloading the FIRMWARE "P1000XWJQ8_P1000AUTJQ1_P1000XXJPZ_HOME.tar.md5" through ODIN and after 25% of downloading, it failed and i again tried to download the same file but it was stuck on "setup conection", i waited around 30 min but it was going smooth and stuck on that option. I restart my tab "POWER+VLOUME DOWN" but after that it is not showing any downloading page as it was appearing before but the messege i recieve is in the attached picture that "mobile not connected to PC/laptop".
need suggessions as i need to make it work :crying:
That is just another download mode.
You can flash it when Odin detected it.
But make sure it is fully charge.
Sent from my GT-P1000 using xda app-developers app
priyana said:
That is just another download mode.
You can flash it when Odin detected it.
But make sure it is fully charge.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
But it is not detecting in ODIN as well n which file shall i use to flash it again bcaz nothing is working and it is fully charged still same
I will try again to do it after few hours.
Thanks for the suggession and will let you know the result.

Boot Menu Manager

Has anyone used Boot Menu Manager instead of Safestrap for duel booting?
Sent from my MZ609 using xda app-developers app
cnorman76 said:
Has anyone used Boot Menu Manager instead of Safestrap for duel booting?
Sent from my MZ609 using xda app-developers app
Click to expand...
Click to collapse
Why bother you can have up to 4 roms going at the same time in SS 3.05. In essence you can quad boot.
Sent from my BNTV250A using xda app-developers app
I believe that boot manager is not compatible with the Bionic due to the locked bootloader.
Theoretically they could modify it to have safestrap auto-flash something at bootup (or modify the safestrap config file), but all those solutions would still require Safestrap, and anyway they haven't.
Thought since it was for the RAZR with ICS (which by the way has a locked bootloader) it might work on the Bionic! I just went with SS! It works fine! Thanks!
Sent from my MZ609 using xda app-developers app

Safestrap 3.12

Anybody got an alternate download link? I can't download from goo.im on my phone even with the app. Would be greatly appreciated.
Sent from my MB886 using xda app-developers app
That is old stuff man haha
Sent from my MB886 using xda app-developers app
Semborski said:
Anybody got an alternate download link? I can't download from goo.im on my phone even with the app. Would be greatly appreciated.
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
don't use safe strap. unlock the bootloader, flash a real rom. change the boot logo to the stock one and noone will ever know you that you unlocked it.
Which would you suggest? I do have unlocked boot loader currently.
Sent from my MB886 using xda app-developers app
Well you don't use safe strap with am unlocked bootloader. Get cwm.
Sent from my PACMAN MATRIX HD MAXX
That has to be flashed with fastboot right? Any tutorials?
Sent from my MB886 using xda app-developers app
There's a whole bunch. And a tool that does it all for you also. Look in the development section man. Ain't hard to search.
Sent from my PACMAN MATRIX HD MAXX
Semborski said:
That has to be flashed with fastboot right? Any tutorials?
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Just download the cwm file and place it in fast boot folder or platform tools if you have SDK.. Open command window there by presssing shift key and right clicking simultaneously... Type the command "fastboot flash recovery recovery_name.img". Replace the name of your recovery To recovery_name... Then "fastboot reboot"
Sent from my MB886 using xda app-developers app
Just did it and saw you posted. When I restored my phone last night I did it manually in cmd with fast boot so it was easy enough.
Sent from my MB886 using xda app-developers app
Semborski said:
Just did it and saw you posted. When I restored my phone last night I did it manually in cmd with fast boot so it was easy enough.
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Always use manual fastboot/adb commands... Those are better than tools..
Sent from my MB886 using xda app-developers app
Can I use a 4.0.4 ROM or anything? I miss otg support. Otherwise what are some good 4.1.2 ROMs?
Also to your reply: by cmd I meant command prompt. I did it with adb and fastboot directly.
Sent from my MB886 using xda app-developers app
Semborski said:
Can I use a 4.0.4 ROM or anything? I miss otg support. Otherwise what are some good 4.1.2 ROMs?
Also to your reply: by cmd I meant command prompt. I did it with adb and fastboot directly.
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Yes you can get 4.0.4 back... But reg otg, it works in 4.1.2 as well ... Even it works with all 4.2.2 nightlies... What problem you face in otg?
Sent from my MB886 using xda app-developers app
Im on stock 4.1.1 right now. I try to use an app called arduino commander and it doesn't work. Nothing plugged into my externally powered otg cable works. What's a good 4.1.2 ROM to use?
Sent from my MB886 using xda app-developers app
Semborski said:
Im on stock 4.1.1 right now. I try to use an app called arduino commander and it doesn't work. Nothing plugged into my externally powered otg cable works. What's a good 4.1.2 ROM to use?
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
try this app and tell me whether it works or not....
Myth tools will flash it at the push if a button.
Sent from my MB886 using xda premium
dalbig said:
Myth tools will flash it at the push if a button.
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
no devoloper will recomend myth tools.. it is for lazy noobs..
Aingaran said:
no devoloper will recomend myth tools.. it is for lazy noobs..
Click to expand...
Click to collapse
That's a matter of opinion.. all I know is the program works. Someone was asking for help so I gave them my thoughts on what I've experienced.
Sent from my MB886 using xda premium
Aingaran said:
no devoloper will recomend myth tools.. it is for lazy noobs..
Click to expand...
Click to collapse
one click tools aren't for lazy noobs... if it helps you then thats alright.
How do you flash a ROM? I want to install the pacman ROM. I tried to erase factory reset and install zip from SD card but it gave an error. Any advice?
Sent from my MB886 using xda app-developers app
Are you using the cwm from Matt groff or the version from the photon Q?
Sent from my PACMAN MATRIX HD MAXX

Phone shuts down

This happen twice on me both times I had to hold power and volume down than the phone just wakes up. Also both times this has happen I was riding my bike from work listening to music and it just shuts down. I'm wondering if anyone else had experienced the same problem or if anyone knows why this is happening. I'm considering calling sprint and swapping for a new phone.
Sent from my HTCONE using xda app-developers app
SkinnyBiggs said:
This happen twice on me both times I had to hold power and volume down than the phone just wakes up. Also both times this has happen I was riding my bike from work listening to music and it just shuts down. I'm wondering if anyone else had experienced the same problem or if anyone knows why this is happening. I'm considering calling sprint and swapping for a new phone.
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
What rom did you flash, did you flash any kernel? More details are needed.
Sent from my lair.
Just viper Rom that's the only thing I've flashed since gaining s off
Sent from my HTCONE using xda app-developers app
SkinnyBiggs said:
Just viper Rom that's the only thing I've flashed since gaining s off
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
I would flash different sense rom, just to rule out the phone hardware problem. After full wipe of course.
Sent from my lair.
SkinnyBiggs said:
Just viper Rom that's the only thing I've flashed since gaining s off
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
ViperRom is solid, I have been running it with no issues at all since the phone was released. Maybe you didn't wipe properly before flashing or maybe just a bad flash, last thing I would consider is hardware. Try downloading the Rom again (don't flash the same download again) wipe and flash and see how you get on.
Sent from my HTCONE using xda app-developers app
I agree with volk and try a different rom. Just remember no 2 phones are alike, What works well on mine may not work at all on yours. Odd, yes but true.
I flashed cleanrom last night, and just a few minutes ago it happen again. I'm starting to think it's a hardware issue
Sent from my HTCONE using xda app-developers app
Will running ruu undo s off? I'm just going to return the phone for another One I need to get back to s on can one of you provide the link please
Sent from my HTCONE using xda app-developers app
SkinnyBiggs said:
Will running ruu undo s off? I'm just going to return the phone for another One I need to get back to s on can one of you provide the link please
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
Have you tried locking the boot loader and then running the RUU and starting over?
Not yet haven't had the time but this weekend I will be able to. My plan is to unroot, undo s off. stay stock for a few days see if the issue disappears. Than root again and if that fixes the problem than I'm keep my phone if not I'm swap phones.
Sent from my HTCONE using xda app-developers app
SkinnyBiggs said:
Will running ruu undo s off? I'm just going to return the phone for another One I need to get back to s on can one of you provide the link please
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
Running RUU should not affect s-off but it is known to fix many issues people have had where flashing new roms didnt fix the problem. I would try it over anything else at this point and then root again and flash away and see how you get on.
Mine also . Can anyone let me know how to relock. So I can use RUU.
Sent from my LG-LS970 using xda premium
strskysun1 said:
Mine also . Can anyone let me know how to relock. So I can use RUU.
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
fastboot oem lock
Sent from my HTC One Everything you're phone isn't
Yea type that code bigdaddy posted in the command I undid s off, than ran a ruu than, re s off with moonshine everything works perfectly now
Sent from my HTCONE using xda app-developers app

Serious problem real help needed

I have galaxy note I want to update it via Odin but my mistake I flashed Galaxy s2 stock ROM
After that the device reboot with sounds but without screen on after that I flashed the stock note 1 the device reboot with sound and touck key light but also screen off, the touch of the screen work I can open lock screen and other touch
But with screen off
What can I do please help me
Thanks in advanced
Sent from my HTC One using xda app-developers app
Do you get screen on with download mode or recovery?
Sent from my GT-N7000 using XDA Premium 4 mobile app
SpyderTracks said:
Do you get screen on with download mode or recovery?
Sent from my GT-N7000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No screen still off even in download mod
I'd tried USB jig and also the screen still off
Sent from my HTC One using xda app-developers app
Sounds like the screen's fried, but I'd wait for someone else to reply.... I know there are a few people who've flashed s2 roms by mistake.
Sent from my GT-N7000 using XDA Premium 4 mobile app
mustapharma said:
No screen still off even in download mod
I'd tried USB jig and also the screen still off
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
boot into download mode using vol dwn+home+power.(even though the screen is off keep pressing the buttons for 15 secs).. then after a few seconds press vol up.. connect the phone to pc and open odin. check if it recognizes the phone., if the COM port show yellow or blue... try flashing a GB rom which has boot loader....
Good luck. I hope you have success.

Categories

Resources