Related
Hello, i have one piece I9000 running on 2.1 and flashed it with ODIN to 2.1 JPJG8. I now want to install lagfix on it. Can someone instruct me how to do it?
what type of lagfix do u want ? there is a simple one called 'one click lag fix' (OCLF) available in market. or there is voodoo or speedmod.. have a look in the android development section you will see them all in there
azzledazzle said:
what type of lagfix do u want ? there is a simple one called 'one click lag fix' (OCLF) available in market. or there is voodoo or speedmod.. have a look in the android development section you will see them all in there
Click to expand...
Click to collapse
Which one to you recommend, im running on 2.1 version JPJG8? ALso, give me link...thank you.
Well checked the site you recommended and found OCLF ok...I wish to install Stock ROM using ODIN. After that can i just root the phone and then install lagfix?
http://forum.xda-developers.com/showthread.php?t=822756 - this is speedmod
http://forum.xda-developers.com/showthread.php?t=823300 - this is voodoo
i use speedmod but i am not saying that is the best one, i have also used voodoo, they are similar but it all boils down to personal choice there is no best / worst
also read through the whole thread before going ahead with it, make sure its compatible with your device and make sure you know how to recover if something goes wrong.
Ok, thanks for the info bro...i'll check out your link
guy27 said:
Well checked the site you recommended and found OCLF ok...I wish to install Stock ROM using ODIN. After that can i just root the phone and then install lagfix?
Click to expand...
Click to collapse
Yes you can do that
azzledazzle said:
Yes you can do that
Click to expand...
Click to collapse
Thanks, anyway i think i bricked my phone. Put another post on this forum. Maybe you can help.
what have you done ? what are the symptoms and how did u get it into the state its in now ?
azzledazzle said:
what have you done ? what are the symptoms and how did u get it into the state its in now ?
Click to expand...
Click to collapse
Well, i flashed my phone with this version to I9000JPJG8 using ODIN. It is just PDA file and i think i ticked re-partition. Phone version was:
PDA: I9000 XWJM2
PHONE: I9000 XXJM1
CSC: I9000 OXXJM2
Now i see a blue circle instead of my network logo. Can you help me?
guy27 said:
Thanks, anyway i think i bricked my phone. Put another post on this forum. Maybe you can help.
Click to expand...
Click to collapse
can you get into download mode for the least?
oggy059 said:
can you get into download mode for the least?
Click to expand...
Click to collapse
Yes i can...
any suggestions what i should do next...please really need help
reflash your firmware(just pick any firmware you like)...
open the samfirmware>samsung android>samsung galaxy s
you would find many firmwares available but you need to register first...any feedback please post here...
oggy059 said:
reflash your firmware(just pick any firmware you like)...
open the samfirmware>samsung android>samsung galaxy s
you would find many firmwares available but you need to register first...any feedback please post here...
Click to expand...
Click to collapse
My phone was originally European 2.1 or 2.2 firmware though can't recall exact version. Can u suggest me latest compatible firmware? Also, can you tell me if there are issues on upgrading or downgrading galaxy s phones?
guy27 said:
My phone was originally European 2.1 or 2.2 firmware though can't recall exact version. Can u suggest me latest compatible firmware? Also, can you tell me if there are issues on upgrading or downgrading galaxy s phones?
Click to expand...
Click to collapse
Lol, even I've forgotten mine because I bought it from Orange....I think all the 2.2.1 works...mine is I9000XXJPU(I've tried to flash I9000XXJPY, but failed )anyway, no need to recall back your original firmware, just take any 2.2.1 firmwares and flash it...but be careful, because there are possibilities to brick your SGS even though the risk is small....
Can you recommend any 2.2 european firmware i can flash with? I dont want 2.2.1 since i think its risky.
guy27 said:
Can you recommend any 2.2 european firmware i can flash with? I dont want 2.2.1 since i think its risky.
Click to expand...
Click to collapse
Sorry, I can't really recommand you any since I haven;t tried any 2.2 yet...but for those in france, I think they use I9000XXJPO...I don't know the other countries...
oggy059 said:
Sorry, I can't really recommand you any since I haven;t tried any 2.2 yet...but for those in france, I think they use I9000XXJPO...I don't know the other countries...
Click to expand...
Click to collapse
Can i install 2.2.1 directly or should i install 2.2 first then 2.2.1?
Can i downgrade to I9000XXJM2 2.1 from I9000JPJG8 2.1?
Hello, i have odin v1.85 and also have stock firmware for p7300, just need to know what are the instructions to flash using odin?
Thanks
also need to know, can i downgrade from 3.2 to 3.1? BTW sorry for double post
andrew21 said:
also need to know, can i downgrade from 3.2 to 3.1? BTW sorry for double post
Click to expand...
Click to collapse
itry but not worck please any solution
andrew21 said:
Hello, i have odin v1.85 and also have stock firmware for p7300, just need to know what are the instructions to flash using odin?
Thanks
Click to expand...
Click to collapse
Hi,
There is a nice thread here: http://forum.xda-developers.com/showthread.php?t=1406137
It has complete instructions for using ODIN. I used it to flash stock two weeks ago.
I have had my phone rooted and am using GingerDX v022. I have changed my baseband to 015.
I applied to get my netowkr unlock code off my operator and they sent it to me. But when I tried to enter the unlock code, it would not accept it. Has this got anything to do with the fact that I have changed my phone?
If so, how to I change it all back?
Thank you.
ummmm what do you mean changed your phone?? what phone did you request the code for??? codes are only meant for the device that you requested it for.....if you mean rooted, mine was rooted when i put the network unlock code in, did you write it down correctly??? you can ask them for it again, it will be on they're system
Changed my phone as in, new rom, baseband etc. I was on the phone to the company, and double checked the code was the right one, which it was. They told me if it didn't work I'd have to send it away to get flashed.
I then assumed that the rom/baseband/root hace somehow interfered with my unlocking process.
swap your kernel to stock, and go back to stock OFFICAL rom, and input the code...i had to do that for the X10 mini pro.
Okay, thank you so much for the help. Would you be able to tell me how to do those two things? It'd be a great help as it'd been a while since I've done this kind of thing. And where to get them?
flashtool for flashing kernels etc http://forum.xda-developers.com/showthread.php?t=986697
and the thread for reverting etc
http://forum.xda-developers.com/showthread.php?t=1425240
Just a fyi in case you have a similar issue next time.
This kind of queries are to be posted in the Q&A section instead of the General section.
Sent from my E15i using Tapatalk 2
Which do I do first, the stock kernal or stock rom? Do I need to change the baseband back?
briansuxx said:
Which do I do first, the stock kernal or stock rom? Do I need to change the baseband back?
Click to expand...
Click to collapse
Using Flashtool or SEUS or PCC will restore both stock rom and kernel simultaneously.
As for baseband, try with 015 first, if it doesn't work try 006.
Sent from my E15i using Tapatalk 2
Okay, and if install a custom rom again, will it undo my network unlock??
briansuxx said:
Okay, and if install a custom rom again, will it undo my network unlock??
Click to expand...
Click to collapse
Technically it wouldn't, but if it does, just network unlock again.
Sent from my E15i using Tapatalk 2
SpyderX said:
Technically it wouldn't, but if it does, just network unlock again.
Sent from my E15i using Tapatalk 2
Click to expand...
Click to collapse
Okay thank you so much for the help. And in future I will post this in the proper section.
Do I just download the stock 2.1 Eclair ROM in this topic (http://forum.xda-developers.com/showthread.php?t=1425240) and and flash it using Flashtool or SEUS and then I can enter my code?
you WILL NOT lose network unlock, and not flashing stock BEFORE using seus has been known to brick phones. hence me saying flash stock kernel 1st. you can download the 1.6 version which i know 100% is in english, the 2.1 isnt in english and is pain in the ass
this is the 2.1 you want for flashtool
http://www.mediafire.com/?5tb64hyrin6aa1c
briansuxx said:
Okay thank you so much for the help. And in future I will post this in the proper section.
Do I just download the stock 2.1 Eclair ROM in this topic (http://forum.xda-developers.com/showthread.php?t=1425240) and and flash it using Flashtool or SEUS and then I can enter my code?
Click to expand...
Click to collapse
You have to flash it using Flashtool...
That's about it, afterwards just enter your code.
If it doesn't work flash the 006 baseband and try again.
Btw, hitting the thanks button is more appropriate than posting thanks.
Sent from my E15i using Tapatalk 2
Lloir said:
you WILL NOT lose network unlock, and not flashing stock BEFORE using seus has been known to brick phones. hence me saying flash stock kernel 1st. you can download the 1.6 version which i know 100% is in english, the 2.1 isnt in english and is pain in the ass
Click to expand...
Click to collapse
I know I'm being a pain in the ass but things have to be spelt out for me. What do I download first? Stock kernal and then flash with flashtool and then put the 2.1 ROM you linked to on my phone and that's it? Can I flash both the stock kernal and stock rom using flashtool?
no no your not the 2.1 update is because it aint 100% english yes you can flash BOTH using flashtool. either the 2.1 update i linked OR the 1.6 at top of the thread
Lloir said:
no no your not the 2.1 update is because it aint 100% english yes you can flash BOTH using flashtool. either the 2.1 update i linked OR the 1.6 at top of the thread
Click to expand...
Click to collapse
Ok! Which one of these files is the stock kernal though?
(http://www.mediafire.com/?8bce4dx39e4vp)
It's confusing.
sorry i was meant to say, you can flash the big download INSTEAD of the smaller one to revert, they include the kernel if i remember rightly. but this is stock kernel
http://www.mediafire.com/?ei7ecyzf5wc48qb (small one JUST kernel) i tend to flash that one to be on safe side BEFORE reverting to stock with the 1.6 or 2.1 big download
Lloir said:
sorry i was meant to say, you can flash the big download INSTEAD of the smaller one to revert, they include the kernel if i remember rightly. but this is stock kernel
http://www.mediafire.com/?ei7ecyzf5wc48qb (small one JUST kernel) i tend to flash that one to be on safe side BEFORE reverting to stock with the 1.6 or 2.1 big download
Click to expand...
Click to collapse
okay, and after i flash this file to my phone, which file do i flash to it?
Step 1: flash this http://www.mediafire.com/?ei7ecyzf5wc48qb
Step 2: Pick your poison between the 1.6 or 2.1 download
Step 3: INSERT a simcard thats not meant for your phone in
Step 4: Insert the code
Step 5: you should be unlocked
---------- Post added at 07:58 PM ---------- Previous post was at 07:20 PM ----------
i just remembered DONT TRY THE CODE TO MANY TIMES IT CAN BLOCK YOUR PHONE if you still have problems, phone network provider
I searched every possible location but still can't find stock rom for my phone
I have android 2.3.3 installed
Below is PDA and CSC info
http://fotkica.com/slika.php?slika=256965_167852444_SC20120720-222332.png
it doesn't even need to match, just download one of the newest firmwares
What about warranty?
TwinHeadedEagle said:
What about warranty?
Click to expand...
Click to collapse
If you want waranty use kies to update
End of story.
Sent from my GT-I9001
TwinHeadedEagle said:
I searched every possible location but still can't find stock rom for my phone
I have android 2.3.3 installed
Below is PDA and CSC info
http://fotkica.com/slika.php?slika=256965_167852444_SC20120720-222332.png
Click to expand...
Click to collapse
make nandroid backup of your stock then flash stuff =)
TwinHeadedEagle said:
I searched every possible location but still can't find stock rom for my phone
I have android 2.3.3 installed
Below is PDA and CSC info
http://fotkica.com/slika.php?slika=256965_167852444_SC20120720-222332.png
Click to expand...
Click to collapse
Why can't
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Stock_ROMs
Let's start from beginning:
I have Android 2.3.3 rooted and installed CWM, i need to know how to uninstall CWM in case of some repair, because warranty is lost then...
I searched and people told me I have to flash stock again, and that's why I am searching my original stock ROM
TwinHeadedEagle said:
Let's start from beginning:
I have Android 2.3.3 rooted and installed CWM, i need to know how to uninstall CWM in case of some repair, because warranty is lost then...
I searched and people told me I have to flash stock again, and that's why I am searching my original stock ROM
Click to expand...
Click to collapse
Or you could just flash the stock recovery from the wiki?
Sent from my GT-I9001
TwinHeadedEagle said:
Let's start from beginning:
I have Android 2.3.3 rooted and installed CWM, i need to know how to uninstall CWM in case of some repair, because warranty is lost then...
I searched and people told me I have to flash stock again, and that's why I am searching my original stock ROM
Click to expand...
Click to collapse
To unroot, flash the UnRoot-i9001-signed.zip
To go back stock recovery, flash the 9001_stock_recovery-signed.zip
Don't want to do all this, simply download a stock ROM that suit your region and flash with Odin 4.43 or upgrade your firmware by Samsung Kies.
All of the information you can get it from the Wiki page
Search from there I think all the information that provided in the wiki page is more than enough and easy to understand.
Ok, thanks, now I know
I am living in f***ing Serbia separated from the rest of IT world where everything comes last or doesn't come at all.
I don't have official Gingerbread above 2.3.3 so my only option is to backup my current ROM which is stock and to restore it one day if needed...
TwinHeadedEagle said:
Ok, thanks, now I know
I am living in f***ing Serbia separated from the rest of IT world where everything comes last or doesn't come at all.
I don't have official Gingerbread above 2.3.3 so my only option is to backup my current ROM which is stock and to restore it one day if needed...
Click to expand...
Click to collapse
Above 2.3.3? You're joking, right?
Sent from my GT-I9001
DreamerTKM said:
To unroot, flash the UnRoot-i9001-signed.zip
To go back stock recovery, flash the 9001_stock_recovery-signed.zip
Click to expand...
Click to collapse
Here is a THANX from me for your help. I dont need it but I hate ppl dont say thanks. So here's my instaed :good:
domi525 said:
Above 2.3.3? You're joking, right?
Sent from my GT-I9001
Click to expand...
Click to collapse
Ne salim se...
I'm not joking
TwinHeadedEagle said:
Ne salim se...
I'm not joking
Click to expand...
Click to collapse
Brate niste jedini odsjeceni od svijeta ...
Btw you didnt explain well in first post what you were looking for...
Sent from my GT-I9001 using xda premium
Jel imate vi Pay Pal?
I said I need my stock ROM if anyone knows where to find it...
I gave PDA and CSC
But it doesn't matter, I will backup the current which is stock and save it if it's needed in future
Have you search in SamMobile Firmware?I found one,it have same PDA as you and the build date is September 2011,for more information you can check in SamFirm page.BTW,here the download link : http://www.hotfile.com/dl/156719871/41e0c70/I9001XXKI2_I9001SEBKH1_SEB.zip.html
I found it, but the CSC is not the same. Btw is CSC important to be the same?
I don't know,i still new to android & samsung rom.I think PDA is more important:silly:btw,only this rom has have same PDA as your.
CSC is the Country/Carrier Specific Code (not sure exactly which it is, both kinda make sense). It contains the files for customisation for specific networks, so will have the APN settings, maybe custom ringtones or backgrounds, and can have programs too. Some CSC files contain a lot more than others, hence the file size differences.
Mixing different PDA/PHONE/CSC files is certainly possible, although it might be best not to stray too far on the PDA and PHONE side. The CSC isn't really very important in most cases - at worst you'll probably just have to set up the APN manually
Click to expand...
Click to collapse
from http://forum.xda-developers.com/showthread.php?t=772201
TwinHeadedEagle said:
Jel imate vi Pay Pal?
I said I need my stock ROM if anyone knows where to find it...
I gave PDA and CSC
But it doesn't matter, I will backup the current which is stock and save it if it's needed in future
Click to expand...
Click to collapse
still no pay pal, they promissed it in beggining of 2012 in Serbia, but nothing from that ... Montenegro cant expect it before that thats for sure .. =D
Hello All,
Please guide me on how i can root the INU ROM DDJVB 2.3.6.
I've tried looking for it. But seem to come up to the 2.3.3 one.
Thanks in advance.
Somniloquist
somniloquist said:
Hello All,
Please guide me on how i can root the INU ROM DDJVB 2.3.6.
I've tried looking for it. But seem to come up to the 2.3.3 one.
Thanks in advance.
Somniloquist
Click to expand...
Click to collapse
look here http://forum.xda-developers.com/showthread.php?t=788108
xsenman said:
look here http://forum.xda-developers.com/showthread.php?t=788108
Click to expand...
Click to collapse
Thank you for your response. However, i am unable to find the exact version i might need.
Regards
EDIT: I tried CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.zip and phone is still working. So that does it i guess
somniloquist said:
Thank you for your response. However, i am unable to find the exact version i might need.
Regards
EDIT: I tried CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.zip and phone is still working. So that does it i guess
Click to expand...
Click to collapse
you only need to scroll down that page for JVB
xsenman said:
you only need to scroll down that page for JVB
Click to expand...
Click to collapse
Hi. I rooted the phone as i informed above. Now, SuperUser Request keeps looping. Keeps asking repeatedly to grant permissions. What do i do?
somniloquist said:
Hi. I rooted the phone as i informed above. Now, SuperUser Request keeps looping. Keeps asking repeatedly to grant permissions. What do i do?
Click to expand...
Click to collapse
you have allow permissions for those apps that you have installed and running , or go to open Superuser > settings > automatic response > touch allow
Its Worked for me like a charm!!!!!!!!!
somniloquist said:
Thank you for your response. However, i am unable to find the exact version i might need.
Regards
EDIT: I tried CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.zip and phone is still working. So that does it i guess
Click to expand...
Click to collapse
Hi Thanks for your suggestion i was fed up with custom roms
with regards,
Bharat
hey, can someone help me with rooting my galaxy s
firmware version 2.3.6
baseband version : I9000XXJVT
kernel version: 2.6.35.7-I9000XWJVZ
i dont know witch file do i need to download in this page :
http://forum.xda-developers.com/showthread.php?t=788108
emka123 said:
hey, can someone help me with rooting my galaxy s
firmware version 2.3.6
baseband version : I9000XXJVT
kernel version: 2.6.35.7-I9000XWJVZ
i dont know witch file do i need to download in this page :
http://forum.xda-developers.com/showthread.php?t=788108
Click to expand...
Click to collapse
use this http://download.chainfire.eu/130/CF-Root/SGS/CF-Root-XX_OXA_JVZ-v4.3-CWM3RFS.zip
was looking for this....and worked.
somniloquist said:
Thank you for your response. However, i am unable to find the exact version i might need.
Regards
EDIT: I tried CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.zip and phone is still working. So that does it i guess
Click to expand...
Click to collapse
Thanks,
This CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.zip worked for me too....
Root the INU ROM DDJVB 2.3.6.
Hi,
I tried CF-Root-XX_OXA_JW4-v4.4-CWM3RFS on my DDJVB 2.3.6. It worked on My Galaxy I9000.
You should try...
sgvikramsgv said:
Thanks,
This CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.zip worked for me too....
Click to expand...
Click to collapse
Hi,
I have got the CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.zip and Odin 3_v3.04 with me downloaded on my PC. Please could you share the procedure for rooting my phone GT I9000 on DDJVB Gingerbread 2.3.6 . Sorry for these questions but I am really new to this whole thing.
Regards,
Kaustav
root i9000
hey i wanna ask that is there any problem if task (kies.exe, etc) are killed or not?????
i tried 2-3 times all i got is that the phone is stuck on the boot loop... please suggest something coz i had paid enough to restore my phone
Dude download Odin v1.85 that would be best.... Bring your phone to download mode(volume down + menu+ power button). Now run Odin and connect ur phone, Odin will detect your phone. Now take the cf root file and put it in the PDA and just press start. At finish Odin will make the column green and pass would be written on it.
Congrats ur phone is rooted
Sent from my GT-I9000 using xda app-developers app
Actually flashing jw4 just changes your kernel from jvb to jw4. And it is rooted so works by the way there is.no cf root for jvb.
Sent from my GT-I9000 using Tapatalk 2