Related
And now I'm at your mercy.
I received my Nook Color (1.1.0) today and immediately rooted it with Autonooter 3.0
After that, I went ahead and attempted to flash the Honeycomb rom. I was greeted with this error message in Clockwork and now no matter what I do, every time I clear everything and attemot to install a romm.zip, I get this error message in CWM:
Installing update...
assert failed: getprop("ro.product.device") == "zoom2" || getprop("ro.build.product") == "zoom2:
E:Error in /sdcard/romrestore.zip
(Status 7)
Installation aborted.
Any help?
If clockwork works you should be able to fix it. Try downloading the rom again. I had a bad download once.
-RioT- said:
If clockwork works you should be able to fix it. Try downloading the rom again. I had a bad download once.
Click to expand...
Click to collapse
Sadly I've tried it a good 5-6 times. I get the same error every time. I've even tried redownloading CWM too in case of a bad download, nothing works.
PGibbons999 said:
Sadly I've tried it a good 5-6 times. I get the same error every time. I've even tried redownloading CWM too in case of a bad download, nothing works.
Click to expand...
Click to collapse
are you attempting to use CWR from a SD card, or from internal memory? Which CWR version are you using? Also what are you selecting in CWR to install your zip file?
Have you tried Re-burning your SD card, it sounds like the image might be corrupted.
Also if you wiped everything try Restoring back to stock
http://forum.xda-developers.com/showthread.php?t=914690
Use this thread.
**O yeah also, which HC rom are you attempting to use, and did you check your download against the MD5?
Is it this rom? http://forum.xda-developers.com/showthread.php?t=947071 it listed MD5. so you can make sure you download is not corrupted.
therealguppy said:
are you attempting to use CWR from a SD card, or from internal memory? Which CWR version are you using? Also what are you selecting in CWR to install your zip file?
Have you tried Re-burning your SD card, it sounds like the image might be corrupted.
Also if you wiped everything try Restoring back to stock
http://forum.xda-developers.com/showthread.php?t=914690
Use this thread.
**O yeah also, which HC rom are you attempting to use, and did you check your download against the MD5?
Is it this rom? http://forum.xda-developers.com/showthread.php?t=947071 it listed MD5. so you can make sure you download is not corrupted.
Click to expand...
Click to collapse
-From SD card
-Already formatted and reburned a billion times, same thing
-Already tried that .zip, still no-go
Oh im not even trying HC right now. Just trying to get stock rom back first. I cant even boot into a rom anymore, it wont turn on unless there's CWM on the SD card.
PGibbons999 said:
Oh im not even trying HC right now. Just trying to get stock rom back first. I cant even boot into a rom anymore, it wont turn on unless there's CWM on the SD card.
Click to expand...
Click to collapse
Ok well that Link should work for you then.
http://forum.xda-developers.com/showthread.php?t=914690
Also I was reading on the HC thread, and looks like the newest version requires EXT4 CWR, which is Version 3.0.0.6 the old version 3.0.0.5 will not work for CM7 or that new HC version. So if you were using the old version that would be the problem.
Don't worry you haven't broken your nook if you can still boot off the SD card, then you can Recover your nook. It might just take some reading of the threads.
therealguppy said:
Ok well that Link should work for you then.
http://forum.xda-developers.com/showthread.php?t=914690
Also I was reading on the HC thread, and looks like the newest version requires EXT4 CWR, which is Version 3.0.0.6 the old version 3.0.0.5 will not work for CM7 or that new HC version. So if you were using the old version that would be the problem.
Don't worry you haven't broken your nook if you can still boot off the SD card, then you can Recover your nook. It might just take some reading of the threads.
Click to expand...
Click to collapse
My nook was 1.1.0, should I just re-download the 1.0.1 again and burn that and CWM on the SD card?
PGibbons999 said:
My nook was 1.1.0, should I just re-download the 1.0.1 again and burn that and CWM on the SD card?
Click to expand...
Click to collapse
Just download the 1.0.1 zip files put it in the root of the CWR Sd card, and flash it to the system like any flashable zip file. Remember to Clear your System and Data partitions first. then once that is done you should beable to boot into a completely clean and freash non-rooted 1.0.1 state, Then just download the 1.1 update from B&N website, and do a normal update to 1.1 then you can Root it or anything you want.
therealguppy said:
Just download the 1.0.1 zip files put it in the root of the CWR Sd card, and flash it to the system like any flashable zip file. Remember to Clear your System and Data partitions first. then once that is done you should beable to boot into a completely clean and freash non-rooted 1.0.1 state, Then just download the 1.1 update from B&N website, and do a normal update to 1.1 then you can Root it or anything you want.
Click to expand...
Click to collapse
Which version of CWM should I use? Download link?
PGibbons999 said:
Which version of CWM should I use? Download link?
Click to expand...
Click to collapse
If you are restoring to Stock 2.1 then the old one 3.0.0.5 will work fine,
if you need to install that HC rom, or CM7 then you wil need the 3.0.0.6 version which supports EXT4
http://forum.xda-developers.com/showthread.php?t=959240
I'm pretty sure you can use that to flash EX3 partition as well, so that one will be good for using from now on till a newer version comes out.
therealguppy said:
If you are restoring to Stock 2.1 then the old one 3.0.0.5 will work fine,
if you need to install that HC rom, or CM7 then you wil need the 3.0.0.6 version which supports EXT4
http://forum.xda-developers.com/showthread.php?t=959240
I'm pretty sure you can use that to flash EX3 partition as well, so that one will be good for using from now on till a newer version comes out.
Click to expand...
Click to collapse
O man I'm behind the times, CWR is up to 3.0.1.0 which is what you should be using for everything now.
http://forum.xda-developers.com/showthread.php?t=971197
therealguppy said:
O man I'm behind the times, CWR is up to 3.0.1.0 which is what you should be using for everything now.
http://forum.xda-developers.com/showthread.php?t=971197
Click to expand...
Click to collapse
This is all greek to me. Explain/help?
Jesus christ Im so lost/confused.
I think I've already tried 3.0.0.6 with CWM before and it didnt change anything. The new version is a bunch of files I dont understand.
I just got this thing today and now it's completely useless and I dont understand half of the instructions.
ARG
PGibbons999 said:
Jesus christ Im so lost/confused.
I think I've already tried 3.0.0.6 with CWM before and it didnt change anything. The new version is a bunch of files I dont understand.
I just got this thing today and now it's completely useless and I dont understand half of the instructions.
ARG
Click to expand...
Click to collapse
http://mirror1.kanged.net/recoveries/recovery-clockwork-3.0.1.0-encore.img
This is the IMG file that you will need to burn to your SD card..... if your on windows I recommend using Win32Imager..... once you have your CWR sd card, Download the 1.0.1 Zip then drop that zip file into the root of the CWR SD card.... Boot off the CWR SD card. clear your system, data, and cache. Install the Zip file......
if you still can not boot after this you might have corrupted your boot Partition.
in which case you will need to download and flash THIS FILE which is a stock boot partition.
there are so many helpfully threads on this forum, you should really take some time and read through them.
Using win32
I write the .img file to the SD card (E
Then I try to drop the romrestore.zip file on to the SD card and it says I need to reformat it. This would wipe the original win32 write, wouldn't it?
PGibbons999 said:
Using win32
I write the .img file to the SD card (E
Then I try to drop the romrestore.zip file on to the SD card and it says I need to reformat it. This would wipe the original win32 write, wouldn't it?
Click to expand...
Click to collapse
If windows is not seeing your sd card correctly then you either did something wrong or you sd cards is messed up..
Please tell me what windows you are using and what steps you did when you burned the img to the SD card... Also tell me what brand of SD card it is and what size.
also did you verify you download of the SD card img with MD5 checksum?
therealguppy said:
If windows is not seeing your sd card correctly then you either did something wrong or you sd cards is messed up..
Please tell me what windows you are using and what steps you did when you burned the img to the SD card... Also tell me what brand of SD card it is and what size.
Click to expand...
Click to collapse
I was using win32 wrong.
Windows 7
Chose the file (recovery-clockwork-3.0.1.0-encore)
Chose the drive ( E: )
"Write" - It flashed just for a second
"Write" - Correctly wrote recovery-clockwork-3.0.1.0-encore to the SD
Put rom on SD card (romrestore.zip)
Put micro-SD into Nook
Cleared System/Data/Cache
Chose romrestore.zip
Received the same error.... again.
It's a SanDisk 4gb
also did you verify you download of the SD card img with MD5 checksum?
Click to expand...
Click to collapse
Not sure what this means.
PGibbons999 said:
I was using win32 wrong.
Windows 7
Chose the file (recovery-clockwork-3.0.1.0-encore)
Chose the drive ( E: )
"Write" - It flashed just for a second
"Write" - Correctly wrote recovery-clockwork-3.0.1.0-encore to the SD
Put rom on SD card (romrestore.zip)
Put micro-SD into Nook
Cleared System/Data/Cache
Chose romrestore.zip
Received the same error.... again.
It's a SanDisk 4gb
Not sure what this means.
Click to expand...
Click to collapse
When you "Chose romrestore.zip" what menu item are you using in CWR
You should be going to "install zip from sdcard" >then "choose zip from sdcard" > then select your zip... I assume you are doing it like this.
the only thing I can think of if you are doing everything write is that your Zip file is corrupted. or you permission are screwed up....
Please download http://www.winmd5.com/ and verify that the file matches the MD5 checksum...
If your using the 1.0.1 from the link I gave you then the checksum is this
md5sum: 6d00a461a221e69195440355f6706104
While I was waiting, I tried the CWM removal and that worked, I can get to the "Touch the future of reading" screen.
A step further but it's stuck there...
Hi, I've installed needed zipfile on sd card of my galaxy mini, but when I open in recovery mode and need to select I can't find the zip file on my sd card.
Could someone tell me what I need to do. Guess I'm doing something wrong
thank you
runmo
runmo said:
Hi, I've installed needed zipfile on sd card of my galaxy mini, but when I open in recovery mode and need to select I can't find the zip file on my sd card.
Could someone tell me what I need to do. Guess I'm doing something wrong
thank you
runmo
Click to expand...
Click to collapse
Please go through this article to falsh CM7 without any problem... It also has got solutions to most common problems user get while flashing...
http://yagyagaire.blogspot.com/2011/09/flashing-cyanogen-mod-710-in-samsung.html
Also, make sure you don't copy the zip file inside any folder. Copy it to /sdcard/ and everything will be fine...
I just picked up a Bionic, but don't have a micro sd card for it yet. I already rooted it, but was wondering if I can just save rome on the internal memory and flash them like that or if that would be an issue?
Any quick help would be appreciated.
I don't see why not. When I download a row or theme, it downloads to the internal sd in the download folder and I flash from there
I would be careful with that, because from what I've read, they always recommend flashing from the sdcard because if the internal memory gets erased and something goes wrong, you won't have the zip file to flash the rom from.
Reverence12389 said:
I would be careful with that, because from what I've read, they always recommend flashing from the sdcard because if the internal memory gets erased and something goes wrong, you won't have the zip file to flash the rom from.
Click to expand...
Click to collapse
I believe reverence is right it can be done but risky cause if that internal sdcard is wiped you are screwed lol
Sent from my DROID BIONIC using Tapatalk
Hello,
I am so new to this it is not even funny. I have been relentlessly trying to root an SD card for my nook. I am following the thread on this site that gives step by step instructions and all links - ([ROM][CM7] [v1.3] Size-agnostic SD Card image and CM7 installer for SD Cards.). When I download the "image" at the beginning of the steps - the one you have to unzip- my computer downloads it as a .bin file and nothing, and I mean nothing, I have tried will unzip that damn image. I have burned through 2 SD cards trying. I do not know what to do. I have downloaded every unzip utility on both Mac and Windows to no avail. If anyone can help me I would really appreciate it. Thank you for your time.
TragykJosh said:
Hello,
I am so new to this it is not even funny. I have been relentlessly trying to root an SD card for my nook. I am following the thread on this site that gives step by step instructions and all links - ([ROM][CM7] [v1.3] Size-agnostic SD Card image and CM7 installer for SD Cards.). When I download the "image" at the beginning of the steps - the one you have to unzip- my computer downloads it as a .bin file and nothing, and I mean nothing, I have tried will unzip that damn image. I have burned through 2 SD cards trying. I do not know what to do. I have downloaded every unzip utility on both Mac and Windows to no avail. If anyone can help me I would really appreciate it. Thank you for your time.
Click to expand...
Click to collapse
Go to my tips thread linked in my signature and there is a link to a new image file that should work. It says ics on it, but it still works great on CM7.
leapinlar said:
Go to my tips thread linked in my signature and there is a link to a new image file that should work. It says ics on it, but it still works great on CM7.
Click to expand...
Click to collapse
Thank you for the help. I downloaded the file from your thread, I get a boot.bin file. When I go to unzip it I get another zipped file with the addition of .cgpz Am I doing something wrong??
TragykJosh said:
Thank you for the help. I downloaded the file from your thread, I get a boot.bin file. When I go to unzip it I get another zipped file with the addition of .cgpz Am I doing something wrong??
Click to expand...
Click to collapse
Something is wrong with your PC. It should have a single file in the zip that ends in .img. Try downloading with your nook or a different PC. (Also some PCs hide the .zip ending from you, which I think really sucks.)
leapinlar said:
Something is wrong with your PC. It should have a single file in the zip that ends in .img. Try downloading with your nook or a different PC. (Also some PCs hide the .zip ending from you, which I think really sucks.)
Click to expand...
Click to collapse
OKay so I used a different computer - Windows this time, I use a Mac. and I burned the image to an SD and all necessary files. When I loaded it into my nook I got the penguin and the blue script, but then it says Initial install files not found please download from nook.linuxhacker.ru
Any ideas what that is about?
TragykJosh said:
OKay so I used a different computer - Windows this time, I use a Mac. and I burned the image to an SD and all necessary files. When I loaded it into my nook I got the penguin and the blue script, but then it says Initial install files not found please download from nook.linuxhacker.ru
Any ideas what that is about?
Click to expand...
Click to collapse
Yes, you need to rename the rom zip file with update- at the beginning. CM changed their naming standard to cm-. You obviously did not use my image or that would have been fixed. You will have to rename the zips everytime you flash a new one.
leapinlar said:
Yes, you need to rename the rom zip file with update- at the beginning. CM changed their naming standard to cm-. You obviously did not use my image or that would have been fixed. You will have to rename the zips everytime you flash a new one.
Click to expand...
Click to collapse
Okay I see what I did. I used the wrong file - I had yours and the old one saved and like the dork I am I used the wrong one. I dont know how to add the extension update- to the file, it will not let me make changes to it. So I downloaded your file and I was wondering if I am supposed to unzip them? When I do unzip them I get two files that my computer doesnt recognize and one is named uRecIMG and one is uRecRAM. What am I supposed to do with those files?? Sorry to be a total bother I am just totally clueless. Thanks
TragykJosh said:
Okay I see what I did. I used the wrong file - I had yours and the old one saved and like the dork I am I used the wrong one. I dont know how to add the extension update- to the file, it will not let me make changes to it. So I downloaded your file and I was wondering if I am supposed to unzip them? When I do unzip them I get two files that my computer doesnt recognize and one is named uRecIMG and one is uRecRAM. What am I supposed to do with those files?? Sorry to be a total bother I am just totally clueless. Thanks
Click to expand...
Click to collapse
Yes, unzip them. Just put the card in your PC and copy those two files to the SD. They will replace the two files that are there. That's all there is to it. Next time you boot to sd recovery it will use those files instead of the old ones. And it will recognize the new file names for the rom zips.
leapinlar said:
Yes, unzip them. Just put the card in your PC and copy those two files to the SD. They will replace the two files that are there. That's all there is to it. Next time you boot to sd recovery it will use those files instead of the old ones. And it will recognize the new file names for the rom zips.
Click to expand...
Click to collapse
Thank you so so much for all your help. Unfortunately my SD is only 2GB and it says there is not enough room to place to the new files on the SD. I guess I will have to buy a larger card when I can (which sucks I was sooo close). I just wanted to make sure I thanked you for all the help and advice and walking this noob through it. Again thanks I really appreciated it
TragykJosh said:
Thank you so so much for all your help. Unfortunately my SD is only 2GB and it says there is not enough room to place to the new files on the SD. I guess I will have to buy a larger card when I can (which sucks I was sooo close). I just wanted to make sure I thanked you for all the help and advice and walking this noob through it. Again thanks I really appreciated it
Click to expand...
Click to collapse
Something is very wrong there. Those two files are tiny. And they are replacing files already there so should take no more room. You were probably not taking the card out and putting in your PC. You were probably plugging in the USB cable. You need to do the first thing. Put card in PC.
Edit: Something is really wrong with your Mac. First it will not download or read the zips right, then it will not let you rename the rom .zip and now it will not let you copy files to the boot partition. It is your Mac that is the problem, not the card size.
leapinlar said:
Something is very wrong there. Those two files are tiny. And they are replacing files already there so should take no more room. You were probably not taking the card out and putting in your PC. You were probably plugging in the USB cable. You need to do the first thing. Put card in PC.
Edit: Something is really wrong with your Mac. First it will not download or read the zips right, then it will not let you rename the rom .zip and now it will not let you copy files to the boot partition. It is your Mac that is the problem, not the card size.
Click to expand...
Click to collapse
I was placing the card into the PC. Also I didnt use my Mac for the card, I used a Windows PC. I followed all the instructions from verygreen when making the card and used Winimage to write it. When I insert the card into my computer I get two different files a boot that contains the boot.bin file and the ram and image files. And then there is a seperate file/drive on the sd labeled SD cm7.
If I make a new SD card, do I use verygreens' image file and then add your two files or do I use your two files only or is there another file I am missing? I might end up paying the 40 for the SD card already done, though I really hate t spend the money if I could just get it right.
Anyway thanks for everything....again!!! and I am sorry for my incompetence
(continued from above) I am attaching screenshots of what the SD card contains when i plug it into the computer.
TragykJosh said:
I was placing the card into the PC. Also I didnt use my Mac for the card, I used a Windows PC. I followed all the instructions from verygreen when making the card and used Winimage to write it. When I insert the card into my computer I get two different files a boot that contains the boot.bin file and the ram and image files. And then there is a seperate file/drive on the sd labeled SD cm7.
If I make a new SD card, do I use verygreens' image file and then add your two files or do I use your two files only or is there another file I am missing? I might end up paying the 40 for the SD card already done, though I really hate t spend the money if I could just get it right.
Anyway thanks for everything....again!!! and I am sorry for my incompetence
Click to expand...
Click to collapse
If you are going to start fresh, use my image zip file. Follow verygreen's instructions but use my image file. It is on the same post you got the updated files. It already has the updated files on it. Then it will install the rom zips that have the new naming standard (cm-).
leapinlar said:
If you are going to start fresh, use my image zip file. Follow verygreen's instructions but use my image file. It is on the same post you got the updated files. It already has the updated files on it. Then it will install the rom zips that have the new naming standard (cm-).
Click to expand...
Click to collapse
Yeah I believe I will start anew. So the image file is the file beneath the ones I downloaded from you? Or is it in another spot. THanks
TragykJosh said:
Yeah I believe I will start anew. So the image file is the file beneath the ones I downloaded from you? Or is it in another spot. THanks
Click to expand...
Click to collapse
Same place.
leapinlar said:
Same place.
Click to expand...
Click to collapse
I DID IT!!!!!! THank you so much for everything. This is amazing!!
If I pull the card out does it go back to being a nook??
Again Thank you soo much
Yes. But to get back to stock to just run it, press the n key while the cyanoboot logo first shows and the boot menu comes up. Then you can choose to boot to emmc, which in your case is stock. Or just take the card out.
Long story short -- I'm selling my Note 4 so I wiped/formatted EVERYTHING (used "format data" option in TWRP which required me to type "yes"). After that happened I found I didn't have an OS installed. Ok, no big deal right? I'll mount my sdcard and copy the stock firmware over than flash with TWRP.
WRONG. Every time I try to copy a file to either the sd card or the internal storage, I get the following error message:
"Cannot copy Trltetmo_N910TUVU1ANJ7_Stock_Deodexed.zip
Its file size is larger than the device limit."
Click to expand...
Click to collapse
Wtf? In file explore it says that the SD card has 29.7GB free space available. And internal storage has 24.1GB. Obviously something is not right here.
Is it possible that TWRP didn't format things correctly? I just want to know how to fix this so I can get the stock firmware back on this bad boy and get it sold. I have been out of the android scene for awhile so any and all help is greatly appreciated.
Also, not sure if it's worth noting but when I mount my Note 4 in windows with TWRP both the internal storage and sd card have like no file structure or files whatsoever. Completely empty. Also interesting is every time I reboot with TWRP, it asks if I want to install supersu or whatever to root the phone. I say "yes" but each time I reboot after that it asks me the same thing like it didn't actually do anything.
You can use ODIN to install Stock firmware on phone. So you won't need to copy anything to phone/sdcard memory.
If you still want to install that deodexed rom you mentioned, you need to plug your sdcard to computer using a sdcard adapter. TWRP built-in mount fails most of the times when trying to copy big files.
pvsgh said:
You can use ODIN to install Stock firmware on phone. So you won't need to copy anything to phone/sdcard memory.
If you still want to install that deodexed rom you mentioned, you need to plug your sdcard to computer using a sdcard adapter. TWRP built-in mount fails most of the times when trying to copy big files.
Click to expand...
Click to collapse
I guess that's not actually the "stock" stock firmware. Because the file I have is a .zip and is apparently incompatible with Odin. I will go to sam mobile and download the firmware there.
Do you recommend I download the most recent firmware should I flash the one that came with the phone?
Also, I hope that once I get the firmware back on, I will be able to copy large files when mounting normally once booted into the OS...
lmills.117 said:
I guess that's not actually the "stock" stock firmware. Because the file I have is a .zip and is apparently incompatible with Odin. I will go to sam mobile and download the firmware there.
Do you recommend I download the most recent firmware should I flash the one that came with the phone?
Also, I hope that once I get the firmware back on, I will be able to copy large files when mounting normally once booted into the OS...
Click to expand...
Click to collapse
Yes, download the latest firmware and install it using ODIN.
You would be able to see and copy/paste to your internal and memory card normally after phone boots into android.