Database Develop

[Q] why does my xda app indicate its not installed?

OK did the forever root & updated to .893 then installed Liberty ROM. I did this to get new radio and kernel since my 4G hanged and market was acting up. I was on theory rom 1.7 and 1.8. Seems that on all custom roms I install, my xda app would uninstall or vindicates its not installed a reboot seems to fix sometimes not all. And if I try to install android is says I am out of memory, but that is not the case, I have over 2GBs of available space on internal SD. What is going on? Anyone having the same problem?
Sent from my DROID BIONIC using xda premium

Blanco954 said:
OK did the forever root & updated to .893 then installed Liberty ROM. I did this to get new radio and kernel since my 4G hanged and market was acting up. I was on theory rom 1.7 and 1.8. Seems that on all custom roms I install, my xda app would uninstall or vindicates its not installed a reboot seems to fix sometimes not all. And if I try to install android is says I am out of memory, but that is not the case, I have over 2GBs of available space on internal SD. What is going on? Anyone having the same problem?
Sent from my DROID BIONIC using xda premium
Click to expand...
Click to collapse
Settings>Applications>Media Area>XDA app>Move to phone

[Q] Is my Tab dead?

I've been running CM 10.1 on my 7310 for a couple of months - it's slow, but it does the job.
Today it started misbehaving more than usual, so I rebooted. It's spent the afternoon rebooting itself about once every five minutes - freeze and hard reboot (Samsung splash screen). I tried different versions of CM and AOKP to figure out if it was hardware or software, no change.
I wiped it and flashed CM 9 nightlies a couple of hours ago, and got the same behaviour. After some googling I found aLogrec and turned it on. As soon as it boots and tries to start recording the logcat, it hard reboots. I figure the onboard flash storage is borked - is there anything I can do? I can't even get it to boot into Recovery, it just loops forever.
I'm hoping someone out there can give me some ideas before I go out and spend on a Nexus 7..

Have you tried to see what happens if you install official ICS with Odin?
Sent from my GT-P7310 using xda app-developers app

I can't even get into the tab to do anything at this point.

vinfromuk said:
I can't even get into the tab to do anything at this point.
Click to expand...
Click to collapse
You could see if odin still recognize it and fish a stock rom. But by the sound of it I think you're sol.
Sent from my SGH-I727 using xda app-developers app

Odin recognised it and has flashed the right ICS official, but it just sits on a glowing Samsung logo.

Odp: [Q] Is my Tab dead?
I will wipe all data/cache from recovery and see if that works, but I'm not so experienced and you should wait for someone with proper knowledge to give you advice But you just might give it a try

First thing I tried, but thanks for the suggestion

vinfromuk said:
First thing I tried, but thanks for the suggestion
Click to expand...
Click to collapse
Do s factory reset. That'll work.
Sent from my SGH-I727 using xda app-developers app

I just applied the Honeycomb 3.2 shipped image using Odin and it seems to be working. Going to attempt to reapply CWM and flash an ICS build now..

Glad to hear it worked out for you.
Sent from my GT-P7310 using xda app-developers app

It's been stable on the CM10.1 M2 build all day. I don't know why the official 4.0.4 firmware didn't work, but I'm glad I tried 3.2 before giving up.
Thanks again to everyone who offered suggestions.

link
vinfromuk said:
It's been stable on the CM10.1 M2 build all day. I don't know why the official 4.0.4 firmware didn't work, but I'm glad I tried 3.2 before giving up.
Thanks again to everyone who offered suggestions.
Click to expand...
Click to collapse
Be a ninja and paste the link to the rom you used. I've borked my upgrade too. I can get in to loki for oden to send the rom, just need the rom that will work with oden.
Thanks,
R

AnRkey said:
Be a ninja and paste the link to the rom you used. I've borked my upgrade too. I can get in to loki for oden to send the rom, just need the rom that will work with oden.
Thanks,
R
Click to expand...
Click to collapse
You can get the stock firmware from sammobile.com. just register on line, it's free.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

http://samsung-updates.com/device/?id=GT-P7310
I flashed the 4.0.4 from here and it didn't work, so I tried the 3.2 and restored it to shipped state using Odin. After that I rooted and reinstalled CWM with Odin, and then flashed the CM 10.1 M2 build from the Development forum here the usual way (copy to SDcard, reboot recovery).

Good. I should have mentioned you have to start with gingerbread. Could have saved you a step.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

Can I rsd back to stock after installing safestrap??

So I installed safestrap and flashed a ROM based off the new ota. Now that it looks like pwnmymoto2 will provide root on phones that took the ota I was wondering if I can red back to stock. My phone is running flawlessly with the ROM, its just I used quite a bit of space to do all this.
Sent from my XT1060 using xda app-developers app

Slimkat install

Anyone have specific install instructions for slim kat on targa? Do I need a specific version of ss, do I need to install on slot 1? Any help would be greatly appreciated. Thanks!
Sent from my SCH-I535 using xda app-developers app

Well I got no replies, but I went ahead and updated safestrap to 3.65, and installed on slot 1. It is working well.
Sent from my SCH-I535 using xda app-developers app

Bully for You!
mr_cj said:
Well I got no replies, but I went ahead and updated safestrap to 3.65, and installed on slot 1. It is working well.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Well, then. That's better than I got on my Bionic. CyanFox, CM11, or SlimKat(current) would not even breathe on slot 1.
Any other slot, and I was golden.
Yep, test, play, tweak, or wreck.....blow that slot up and go at it again.

antennaman1969 said:
Well, then. That's better than I got on my Bionic. CyanFox, CM11, or SlimKat(current) would not even breathe on slot 1.
Any other slot, and I was golden.
Yep, test, play, tweak, or wreck.....blow that slot up and go at it again.
Click to expand...
Click to collapse
Did you update your SS?
Sent from my SCH-I535 using xda app-developers app

mr_cj said:
Did you update your SS?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Running 3.65; was looking into updating TWRP since I went from SlimKat 3.2 to 3.6.

I'm running SlimKat just fine on Slot 1.

Wifi Tether does not work
Sent from my XT875 using Tapatalk

It works now. Did the AOSP WiFi Fix (check the CM11 topic)
I personally recommend updating to 3.72 safestrap. I was getting errors flashing JBX Kernel until I did that (correctly).

Was anyone able to download the new update? I keep getting a server error.
Sent from my XT875 using Tapatalk

roms
Its good to see people still flashing custom ROMs on their bionics. I still have my bionic and its going as strong as ever. My son uses it and he loves it.

I installed Slimkat and I can't get past the loading screen. It just keeps flashing the Slimkat logo over and over indefinitely.

Alright, I fixed the problem. I made the mistake of using the old bootstrap to install Slimkat, so I wound up with a bricked device. Even the recovery was wiped out so I thought I was screwed. I did some digging and figured it out over the course of a few hours...
I downloaded the latest firmware for the Bionic and tried installing them in the command line while the phone was in fastboot. The img files supposedly loaded successfully, but I still couldn't get into recovery to finalize the system installation. Luckily I discovered RSD 5.6. It worked except there were a few problems in the xml file within the firmware, so I had to take out both lines that had "oem" in them to get it to finish.
After that my Bionic was brought back to factory stock condition. I rooted using the Safe Root command line tool, installed Safestrap 3.73, and flashed Slimkat. It worked great!
If you're having similar issues and I didn't give enough info just let me know and I'll try to help.

[Q] Need help with Bionic, that has Safestrap 3.6 installed but no OS

I work at a cell fix shop and one of my customers brought in a Bionic that his son tried to root and ended up with Safestrap 3.6 installed but no OS. I have done OS fixes by completely wiping the phone and re-installing the stock OS but I would like to just be able to place the stock os in the stock os rom slot but I have no idea how or where to start looking for those files and I have tried searching here for them but I don't know what the official os is for this phone. Any help would be awesome, until this happened I had never even seen safestrap, and I have no idea how to use it and not the time to figure it out by myself. Thanks guys!

If I remember correctly I don't think your going to be able to because he wiped the system, you could try installing the deoxided stock and see
Sent from my XT875 using Tapatalk 2

B.E.McAllister said:
If I remember correctly I don't think your going to be able to because he wiped the system, you could try installing the deoxided stock and see
Sent from my XT875 using Tapatalk 2
Click to expand...
Click to collapse
Ok so should I look then for "deoxided stock" for bionic? or is there a specific version # or something specific I should be looking for? Also if you happen to have a link to that it would be awesome

Here's a link
http://www.droidrzr.com/index.php?/topic/16256-[Bionic][MODs]-Deodex-&-1%-Battery-Mods-for-Stock-JB-98.72.22
But I did notice it's just the os not the system so I doubt it'll work. You could flash a stock based ROM like FlyingJelly and that should take but it would have tweaks and themes different from stock
Sent from my XT875 using Tapatalk 2

FXZ that baby back to stock! I made an oopsie and that was the ticket. Restores file structure and bootloader, etc. Reinstall Safestrap.
Sent from my GT-P3110 using Tapatalk