Problems after factory reset - Galaxy Ace S5830 Q&A, Help & Troubleshooting

I've majorly screwed up. I'm using a samsung galaxy ace s5830. After partioning my sd card I found that I couldn't root my phone since cwm was not allowing it. So I got frustrated and did a factory reset. Now my phone will not get passed the samsung intro and the blinking samsung sign. Please help

Reflash a rom with odin, it will wipe anything wrong (just remember to wipe data, wipe cache, and wipe dalvik cache)

Thanks will do so. can you shed some light as to how a simple factory reset got me into a boot loop

sjg2797 said:
Thanks will do so. can you shed some light as to how a simple factory reset got me into a boot loop
Click to expand...
Click to collapse
After wipe data/factory reset, bootloops can be solved by wiping cache and dalvik cache.
If something got messed in the kernel while trying to flash the root zip, then wiping everything will still keep an error, maybe that's what caused the bootloop, this is fixed with a fresh odin flash.
Check that your root zip is compatible and thay you use the correct recovery to flash it (sometimes it must be done through stock recovery, sometimes through cwm)

Related

Stuck at samsung logo after flashing to stock rom

Hi guys. Tried to root my Note but got stuck at samsung logo. so I went back to download mode and flashed back to N7000DXLP9 and tried a few other different stock roms as well. But I keep getting stuck at Samsung logo. Please help guys.
Simply go to recovery mode. Wipe catch / factory reset - reboot
chintamanijaipuri said:
Simply go to recovery mode. Wipe catch / factory reset - reboot
Click to expand...
Click to collapse
tried that many times but still stuck at samsung logo
any other suggestions?
Have Same Problem Brother
mee too got same problem any help would be appreciated..!
How long did you wait. I found that after installing a new rom or factory wipe that it would take up to 5 minutes to boot. It would just sit at the samsung logo with a pulsing glow for ages.
Maybe you just need to give it more time?
What tools and packages did you use?
zolakt said:
tried that many times but still stuck at samsung logo
Click to expand...
Click to collapse
Wipe cache, do a factory reset, wipe dalvik cache. If still stuck, it looks like a bad flash/kernel problem. Try flashing it again.
Finally succeed
It's work for me, I simply entered my galaxy S3 into recovery, make factory reset, wipe chache and then reboot and my S3 finally boot normally. Thank You all.
Make my thorough wipe as below when flashing a new ROM:
1) Wipe data
2) Wipe cache
3) Wipe dalvik cache
4) Format /system & /preload
5) Format internal sdcard (make sure you save anything you need before)
6) Flash ROM
7) Wipe cache again
8) Wipe dalvik cache again
9) Reboot
This way you ensure you flash your new ROM in a completely clean environment. Then when booting the new ROM, wait some time before saying it's stuck at the boot logo. As people already said, sometimes it takes a long time to display the setup screen (but should be less than 8 minutes in any case). I'm assuming you have CWM to do this; if you don't, try the equivalent in the stock recovery (but it doesn't have all these options), poweroff, boot in download mode, then flash using Odin.
ATTENTION: make sure you make the wipes using a brick-free kernel! Search the forums if you don't know what it is. If you don't, you may brick your phone. You should flash a brick-free kernel before anything, without any wipes (it can be done through Odin if you download a safe kernel in this format); then you are ready to go with the wipes and flashing a new ROM.
my j500h keeps on restarting just after displaying samsung logo. i have tried nearly everything but seem to be stuck on the same bootloop. any idea am so stressed up.

[Q] I9305 Won't boot new rom

Hi. My galaxy s3 4g I9305 OPTUS AUSTRALIA. has been rooted cwm installed. I have tried to install Xtreme.v6.1 and supreme rom 5.0. Neither would fire up after multiple attempts. I have wiped delvic cache, cache partition, wipe data/ factory reset, battery stats and fix permissions.
both roms load (flash) sucessfully then I get the samsung reboot screen and after that a pulsing samsung logo which stays for hours. can any one tell me what I may have missed? Flash is done via cwm install zip from sd card.
tommo the noob said:
Hi. My galaxy s3 4g I9305 OPTUS AUSTRALIA. has been rooted cwm installed. I have tried to install Xtreme.v6.1 and supreme rom 5.0. Neither would fire up after multiple attempts. I have wiped delvic cache, cache partition, wipe data/ factory reset, battery stats and fix permissions.
both roms load (flash) sucessfully then I get the samsung reboot screen and after that a pulsing samsung logo which stays for hours. can any one tell me what I may have missed? Flash is done via cwm install zip from sd card.
Click to expand...
Click to collapse
Try to do the 3 wipes...
I would try TWP recovery, as big as CWM is I have found many bugs and such with it and so far absolutely zero with TWP. Is it giving you any errors when trying to flash via CWM? Read the text because it may just be warnings and install anyway. There are also logs you can upload (go to advanced settings I believe)
Sent from my GT-I9305 using xda premium
Yea, Try this recovery : http://forum.xda-developers.com/showthread.php?t=2140681

[Q] Installed CM10 but didnt wipe the data now its stuck at boot, what do I do?

I did everything right exceept for forgeting to wipe the data, now its stuck at boot, the cyanogenmod logo just stays on the screen spinning. Not sure whst to do. I tried wiping the data/factory reset through android recovery but that didnt work so I'm ouot of ideas
jarentzen3 said:
I did everything right exceept for forgeting to wipe the data, now its stuck at boot, the cyanogenmod logo just stays on the screen spinning. Not sure whst to do. I tried wiping the data/factory reset through android recovery but that didnt work so I'm ouot of ideas
Click to expand...
Click to collapse
How long did you let to boot logo spin? It can take a while before it gets past that the first time you run it.
Have you wiped cache and dalvik cache? Those usually fix the issue. You could also try fixing permissions to see if that helps too.
When you say you wiped in android recovery, do you mean safestrap?
jarentzen3 said:
I did everything right exceept for forgeting to wipe the data, now its stuck at boot, the cyanogenmod logo just stays on the screen spinning. Not sure whst to do. I tried wiping the data/factory reset through android recovery but that didnt work so I'm ouot of ideas
Click to expand...
Click to collapse
if I'm right, you should wipe in the custom recovery instead of stock recovery.

[Q] Help Stuck in CWM bootloop after formatting system

Hey guys sorry if this has already been posted. I tried to search through the other threads but couldn't find anything with my exact problem. I am a noob when it comes to this stuff so please bear with me. I was trying to reinstall my ROM when I made the dumb mistake to format system, When I was in recovery I wiped data/factory reset, wiped the cache partition, wiped Dalvik cache, and then for some reason went to format system. After I did that and went to reboot the phone it asked me to fix root. I did this and it started the CWM bootloop. Does anyone have any ideas what I can do to fix it?
exitrecovery.zip will stop the boot loop.
Sent from my Nexus 10 using Tapatalk 2
chadsky92 said:
Hey guys sorry if this has already been posted. I tried to search through the other threads but couldn't find anything with my exact problem. I am a noob when it comes to this stuff so please bear with me. I was trying to reinstall my ROM when I made the dumb mistake to format system, When I was in recovery I wiped data/factory reset, wiped the cache partition, wiped Dalvik cache, and then for some reason went to format system. After I did that and went to reboot the phone it asked me to fix root. I did this and it started the CWM bootloop. Does anyone have any ideas what I can do to fix it?
Click to expand...
Click to collapse
Also try this...
Pull battery..
Count to 10.
Replace battery.
Press and hold Volume Down and power until the Factory Reset screen comes up..
Hit the power button twice, once to start and the second to confirm.
This should put you into your recovery mode... There you should be able to install the ROM again..
At least this is what has always worked for me...

HELP!!! how to fix boot loop on samsung that did not fix after hard reset

please help.. how to fix my samsung galaxy s duos 2 having boot loop.. it boot and it freeze on boot animation then the screen flicker then reboot and again and again.. i did wipe cache, wipe data, hard reset, wipe dalvik, i also tried flashing stock rom but it did not fix my device.. it started when i partitioned my sd card using the samsung galaxy y cwm recovery. and i did also wipe cache wipe dalvik using it, after that, my device got this boot loop.. :crying:
daganteng15 said:
please help.. how to fix my samsung galaxy s duos 2 having boot loop.. it boot and it freeze on boot animation then the screen flicker then reboot and again and again.. i did wipe cache, wipe data, hard reset, wipe dalvik, i also tried flashing stock rom but it did not fix my device.. it started when i partitioned my sd card using the samsung galaxy y cwm recovery. and i did also wipe cache wipe dalvik using it, after that, my device got this boot loop.. :crying:
Click to expand...
Click to collapse
You're in the wrong forum section, this is for the Captivate.
That being said, it sounds like there's no ROM on your device or that your internet memory died. You can try to run your ROM from a SD card (there are guides on how to do it around here).

Categories

Resources