Related
Hello xda users,
I need HELP !
I have a galaxy tab P1000
currently froyo 2.2
wanted to upgrade to GB
Tried the Odin way from another link on this site (MANUAL updation for galaxy tab(p1000) into 2.3.3 gingerbread ), it failed and the Tab got soft bricked,
somehow managed to unbrick it, now its back to its original fw, but it keeps restarting in a loop until i switchd the damn thing off completely
I have tried to go in download mode to flash but odin doesnt recognise it , tried differnt computers too, no use.
I have gone in recovery mode, hard reset, wipe cache , still when i switch it on, it goes in a reboot loop.
tried to use heimdall. cant get sucess as i might not understand how to use it properly
Please help.
Sincere thanks to you if you can help me get my tab up and running., if not in GB atleast back in froyo.
(PS- i im not worried about my data , and i have not backed up the rom etc before doing any of these)
Try to reinstall or install a usb driver from samsung
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Yeah, happened to me too, nearly had a sh*t my pants when Odin didn't recognise my Tab.
I would recommend -
charge the Tab fully using wall adapter (4 hrs+)
plug it in with Odin open and using USB cable
don't expect Odin to recognise the Tab immediately
check back after 5 mins or so (I don't know, does Odin refresh?)
I was able to restore my Tab from the PC - ! - Marvin screen.
I don't want to go back there again though!
yea dude.. same here
i kept it on charge for a couple of hours and then tried.. bam it conencts..
Libon
Tab not turning on
HI Guys I have Galaxy 1000 .I was updating it by using kies in between the process my computer shut down and when I am trying to connect my tab again its not turning on .can some one help me please ?
Waiting no charge baterry 2 3 j
Run odin
Connect tab . Wait Long time 20 30min
Tab is. Détect go flashing
Sorry for my english
I m.. French
Envoyé depuis mon GT-P1000
GT P1000 Odin wont detect
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
iamkakers said:
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
Click to expand...
Click to collapse
do u have samsung kies installed in your pc? if does, kill the kies process (Ctrl+Alt+Del). close, and open odin3, put your tab into download mode, and then plug it into usb port. try to change different ports.
i always had this problems.. if all if that didn't work, i'll format my pc
Sent from my GT-P1000
odin3
hi
i also have a gt p1000 and odin3 doesnt detect the tab. i've been trying to root my tab for a while, tried odin and it doesnt detect, tried doomlord and it doesnt even get past the first step. i tried uninstalling kies on my windows 8 laptop and still no luck im not too sure what to do. is there something that i might be doing wrong because i follow all the info thati get from here.
is there another rooting app i can try that doesnt brick my device? and or is there an app that i can get that i am able to use a ps3 controller on my device that does not require a rooted device. please help
thanks
My Galaxy tab also doesn't connect to usb after cache wiped humber os flash
Thanks in advance guys!..
Earlier I was using Cyanogen mode 10 Custom ROM but has few issues like recognize SD card.
later I flashed to Humber OS caused real problem.
It was clock work recovery installed but my tab tab boots stays on screen humber OS.
It goes to recovery mode, and also to some unknown recovery mode.
Either the way not recognized by computer. I tried all options like heimtal an Odin. No help.
Friends any help, would be highly appreciated.
BUMP
Any solution to this given the fact that usb drivers have been installed?
Are you sure it is recognised by the computer before trying Odin or Heimdall?
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
farza(db)astany said:
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
Click to expand...
Click to collapse
reason 1: my phone is samsung and it's detected by ODIN, kies and I transfer files from and to my computer without problems. also tried reinstalling just in case but nothing, so I guess this is not the answer for my problem
reason 2: tried with original cable, but as I didn't use the tablet for a long time I also thought it could be the cable, so I asked a friend of mine if he could lend me one cable, but that didn't work. pity. :/
reason 3: tried 3 different versions of ODIN, and in every version my phone (mentioned above) is detected. shame. :S
reason 4: tried the 3 different USB ports in my laptop. two 2.0 USB ports and one 3.0 USB port, so again I doubt this is the reason of my problem.
extra reason: ~~~ maybe it's the OS version ~~~ // this laptop came with windows 8 preinstalled. nothing. then, I updated to win 8.1. again nothing. now I'm running windows 10 and the same, nothing is detected neither by ODIN nor the computer. also tried in 4 different computers running win xp, win 7 and other with win 8.1.
btw, thank you anyway for your apportation; this may help other people, but unfortunately, it's not my case, so can anybody else join me to think about a new reason and a way to solve it? thank you very much :good: :highfive: :fingers-crossed:
~~~~~~~~~~~~ EDIT ~~~~~~~~~~~~
I have continued researching and found a software. it didn't work for me, but maybe it works for other people.
-first, you have to make sure you have java installed on your computer.
-second, extract the oneclick.rar file on an easy-access directory.
-third, put your tab on download mode (while charging icon when tab is turned off, press power + volume down until a yellow triangle appears).
-fourth, click start unsoft-brick and let the magic begin! 8)
note: if a warning error pops up, trust the software and click on resolution center and follow the instructions of one of the three "alternative ways".
download: https://www.dropbox.com/s/8ix6yygu23a1kjn/OneClick.rar?dl=0
good luck!!
help
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
hi can you plz help me out with the processess you followed to as im suffring the same problum only CWM working and even it shows sd card mount error also not installing any rom via SD card showing error and odin not detecting it nothing happening only CWM and blank screen
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
How did you did it im having the same error???
i did the same thing with my tab exactly like yours plzzzz help me recover it
I've flashed 6-8 ROMS on a couple different phones, so not a total noob, but I bow to the vastly superior knowledge here:
My Captivate was running CM7.1 stable from October with no further mods since. I hadn't flashed anything or really messed with the phone in awhile. I was just using the same phone in the same config I had been for 6 months.
A few days ago, CM7 started to force close all my programs. Annoying, but not a problem that rebooting wouldn't probably fix. Rebooted into bootloop (skater logo). 3 Button didn't put me into CWM Recovery, nor would any button combos get me to download mode.
Homemade a jig and got the phone into Download mode, with Odin One Click up and ready to flash to stock. Odin read the phone and I started the flash, but it hung at DO NOT TURN OFF TARGET for a couple hours. I checked on this forum to see what was next. All the previous posts just said to pull battery, re-jig, and start again.
This time, I didn't get the skater, I got the comp!phone. All button & USB combos I've read here bring me comp!phone (even the "hold until two blank screens" one). My PC won't recognize the phone now (so neither will Odin or Heimdall), even after I've reinstalled the Samsung drivers. I've read here that you can flash from the comp!phone screen, but the PC has to see your phone first, obviously.
So I guess I want to know how screwed I am. Magic tips on a easy fix would be just outstanding, too! Is the fact that I wasn't flashing or anything when it bombed interesting to anyone? Thanks in advance...
not sure it's identical but this worked for me: http://forum.xda-developers.com/showthread.php?p=15330252#post15330252
OP,
Check out the "Connection Issues..." Stickied Thread in this forum.
Sent from my SAMSUNG-SGH-I777 using xda premium
Zadig won't load drivers for Heimdall 1-click
I'd tried Heimdall 1-Click Unbrick, but the problem again seems to be with the phone not being recognized. Unbrick runs, fails, and asks if the phone is plugged in.
It refers me to the Resolution Center, where Zadig tries to load the driver, for Captivate, but can't. Zadig provides a dropdown list of devices (my cam, printer, mass storage devices, wireless mouse/keyboard etc.), but the phone isn't listed, and I've tried every USB port. Which is too bad, because that seems like a great tool.
macbuckets said:
I'd tried Heimdall 1-Click Unbrick, but the problem again seems to be with the phone not being recognized. Unbrick runs, fails, and asks if the phone is plugged in.
It refers me to the Resolution Center, where Zadig tries to load the driver, for Captivate, but can't. Zadig provides a dropdown list of devices (my cam, printer, mass storage devices, wireless mouse/keyboard etc.), but the phone isn't listed, and I've tried every USB port. Which is too bad, because that seems like a great tool.
Click to expand...
Click to collapse
If you are still stuck...
Did you actually load a full version of Heimdall? Once I used unbrick as a mini-program. Another time I had to install a full version on my computer in order to get my phone and computer to communicate (that may be the missing driver step).
I know you have probably already done so but search the threads for AdamOutler and his work with Heimdall.
If you're using windows, windows update might be installing the drivers automatically. You might want to disable this feature, uninstall the current drivers and install new ones.
You can also try another pc that doesn't have any installed drivers - just to make sure...
Sent from a Captivate using XDA
macbuckets said:
I'd tried Heimdall 1-Click Unbrick, but the problem again seems to be with the phone not being recognized. Unbrick runs, fails, and asks if the phone is plugged in.
It refers me to the Resolution Center, where Zadig tries to load the driver, for Captivate, but can't. Zadig provides a dropdown list of devices (my cam, printer, mass storage devices, wireless mouse/keyboard etc.), but the phone isn't listed, and I've tried every USB port. Which is too bad, because that seems like a great tool.
Click to expand...
Click to collapse
Did you try manually installing the Samsung/Google usb drivers ? That's the usual culprit since stock are Samsung drivers and roms ( if its Aosp/Cyanogen) the Google drivers prime in that case.
Nearly Identical Problem
I've got the same problem with my Captivate...tried everything I've found in the forums but nothing works.
Background:
I had connection issues before trying to flash, but thought it was a driver issue with my Windows 7 machine. Which is why I had loaded the file onto the SD card when I attempted to upgrade to ICS. During the flash the phone hung and I eventually removed the plug and battery to see if I could reboot. I can get up to the Galaxy S I9000 screen, or the "Downloading..." screen, but I cannot get to the recovery menu or past the initial boot screen. My wife's captivate (same batch) IS recognized by the computer in "download mode" and in the USB transfer mode.
Attempts:
- Installed/uninstalled Kies many times
- Bought and tried a new data cable
- Installed/uninstalled the Galaxy S driver and the Captivate driver many times
- Tried Zadig, Odin, Heimdale, and Adb
- Used programs to remove USB devices and clean registry
- Installed Linux and tried within that OS
- Re-installed Windows 7
- Tried most of the above on my Windows XP system
Has anyone been successful in getting the computer to recognize a Captivate in this circumstance?
macbuckets said:
I'd tried Heimdall 1-Click Unbrick, but the problem again seems to be with the phone not being recognized. Unbrick runs, fails, and asks if the phone is plugged in.
It refers me to the Resolution Center, where Zadig tries to load the driver, for Captivate, but can't. Zadig provides a dropdown list of devices (my cam, printer, mass storage devices, wireless mouse/keyboard etc.), but the phone isn't listed, and I've tried every USB port. Which is too bad, because that seems like a great tool.
Click to expand...
Click to collapse
if u r still facing the problem..and problem isnt solved then just clean the pin of usb connector pin of ur phone...with a thin metal pin..or something like that...
and then u r good to go...
If all else fails...
I managed to brick my Captivate trying to get MUIU off my phone and flash back to Cognition. After many frustrating hours, I contacted Josh at mobiletechvideos.com. He fixed my phone and upgraded me to ICS for $50.00. I mailed my phone to him on a Thursday and received it back the following Friday.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A
Hi..
I am facing an issue with Odin v4.43 .
My Laptop specs are :
USB3.0
HP-pavilion dv6 - 7023Tx (intel i7 3610QM)
OS : Windows 8 -64 bit
.
When i run this application and connect my samsung galaxy S plus device through USB cable, It don't detect Comport nor even displayed "Added" in Message box.
I even installed its 64 bit USB driver but still not. Why?
==================================================================
Whenever i run this application through my old laptop (P4, OS is Windows 7 32 bit and USB2.0 ).
It works and detect the comports and display added in message box.
How could i solve this issue in my new Laptop because i 'll have to leave my old laptop.
Did you already try this:
http://forum.xda-developers.com/showpost.php?p=35227656&postcount=1
hi Gripping,
I installed the same driver on my new laptop but didn't follow the step as mentioned in your refered article.
I try with it then 'll share my experience .
Or this
http://blog.vacs.fr/index.php?post/...ot-detected-problem-on-Android-Samsung-phones
thanks everyone but unfortunately didn't work.
empnetsol said:
thanks everyone but unfortunately didn't work.
Click to expand...
Click to collapse
I was having same problem when I tried to flash with odin (not 4.43). I managed to install the drivers using Heimdall suite 1.3.1. Heimdall comes with drivers folder and a application called zadig inside the drivers folder. It did not work right away but after trail and error it finally showed up as samsung usb driver. sometimes you have to restart your phone to be recognised by your computer. I did on windows 7 too and also I have i9000M. Hopefully will work for you too.
Thanks osterizerble, i have tried many times with different approaches but didn't work.
This is an issue with this machine or might be with 64 bit OS to install its accurate driver completely.
It works smoothly in my old machine without any effort.
It seems Odin V4.43 have the capability to operate through 32-bit systems too.
Thats' the restrictions , i think so.
I have Windows 8 x 64 bit too and I have already successfully flashed a stock Rom to my SGS using Odin.
I used an older version of Odin, I think it's version 1.3.
But my phone wasn't recognized immediately by the PC.
I think it took 2 or 3 times re-starting and re-booting my phone & PC before my phone was finally recognized by Odin.
I used the USB drivers from SamHaLeKe's thread:
http://forum.xda-developers.com/showpost.php?p=11498043&postcount=1
Thansk Gripping and everyone for putting an effort of resolution.
Gripping I am pretty sure,Odin 4.43 will not work.
because i have been tried too mauch with every USB driver with Samsung Kies and after uninstalling it too.
I used SAMSUNG USB Drivers for Mobile Phones (x86 & x64) v1.5.16.0 driver too but it couldn't worked.
Yes Old , I think Odin 3 V1.8 detect Comports and display a message "Added" in Message box.
But i have tried it too, it start flashing and then stuck in no limit of time.
Moreover, i 'll make another try today night again. Hope this may help but i have already tired with it .
It's a good thing nothing happened to your phone when it got stuck in the middle of flashing.
It happened to me twice already, during flashing via Odin, it got stucked and won't continue running. (In my old Windows 7 and recently with Windows 8)
I have no choice but to close Odin and disconnect my phone.
After disconnection, my phone became "hard-bricked". No buttons responding whatsoever.
I was lucky (twice already) to revive my phone and brought it to download mode by doing the following:
1. remove the battery for a few minutes
2. connect the phone to PC via USB cable
3 press the vol down - home button - power buttons and at the same time insert the battery.
After reviving my phone, flashing via Odin became smooth already.
My computer is still giving a same message.
USB drive not recognized and when i come into the device manager, it display 3 wrong things in Other devices.
-> PCI Device
-> Unknown device.
->Unknown device.
empnetsol said:
My computer is still giving a same message.
USB drive not recognized and when i come into the device manager, it display 3 wrong things in Other devices.
-> PCI Device
-> Unknown device.
->Unknown device.
Click to expand...
Click to collapse
Try this may be
http://forum.xda-developers.com/showthread.php?t=2038555
i have already tried with it.
As i Gripping suggest in his first post.
My computer is not recognizing this device.
Moreover, i have tried with solution again but same response.
It says "The best software for your device is already installed".
but i connect my phone, it add three more devices with error as i mentioned in above post.
It shows in device manager "SAMSUNG USB Composite Device".
and when i see the device status
it displays
This device cannot start. Code 10
A request for the USB BOS descriptor failed.
I bricked my galaxy mini (gt-s5570) one year ago while trying to flash a rom to it. Now when i try to unbrick it odin wont recognize it while it is in download mode. Widows does atleast realize that i connected a device but it is not recognizing it. i have tried multiple borts on my computer but none seem to work. Also while in download mode i only see the picture and "Downloading...", no "do not turn off target!" like i see in many pictures. Anybody know how to fix this? i have tried multiple unbrick tutorials but either i get stuck in "setup connection.." in odin while in ramdump or in android system recovery on my phone.
You don't need to say "do not turn off target" in your mini, it's normal.
Try download drivers (from Kies) and try again, or you can try with another PC.
I just hardbricked my S5830 while trying to install cwm.
Actually I tried to install cwm without rooting the phone, and when i checked after this the phone was not going to recovery even samsung default recovery was gone.
Now there was no way through phone to install cwm. So i tried to factory reset the phone. My bad luck, phone is not getting on now.
The problem I am facing now is I am not able to use odin as drivers are not recognising the phone. It always gives drivers malfunctioned error. Even for the adb drivers too.
Has anybody faced this issue?
It is going to download mode. But in pc it is not recognising the phone. I installed all the available drivers.. But still the same.
Thank you in advance.
sie4kor said:
I just hardbricked my S5830 while trying to install cwm.
Actually I tried to install cwm without rooting the phone, and when i checked after this the phone was not going to recovery even samsung default recovery was gone.
Now there was no way through phone to install cwm. So i tried to factory reset the phone. My bad luck, phone is not getting on now.
The problem I am facing now is I am not able to use odin as drivers are not recognising the phone. It always gives drivers malfunctioned error. Even for the adb drivers too.
Has anybody faced this issue?
It is going to download mode. But in pc it is not recognising the phone. I installed all the available drivers.. But still the same.
Thank you in advance.
Click to expand...
Click to collapse
Have a look in the rooting and troubleshooting threads.
If odin isn't recognising your phone then:
1/ drivers for "download-mode" not installed properly.
2/ phone is not actually in download-mode.
3/ usb cable or pc usb port is faulty.
Ri9000 said:
Have a look in the rooting and troubleshooting threads.
If odin isn't recognising your phone then:
1/ drivers for "download-mode" not installed properly.
2/ phone is not actually in download-mode.
3/ usb cable or pc usb port is faulty.
Click to expand...
Click to collapse
I am glad you replied.
I think the drivers for download mode has not installed properly.
I searched in rooting and trouble shooting, couldnt find the proper drivers which detects. Even i installed windows 7 as someone mentioned in some thread. Still nothing worked.
sie4kor said:
I am glad you replied.
I think the drivers for download mode has not installed properly.
I searched in rooting and trouble shooting, couldnt find the proper drivers which detects. Even i installed windows 7 as someone mentioned in some thread. Still nothing worked.
Click to expand...
Click to collapse
1/ All I can suggest is install drivers/ odin as administrator. Windows should detect running phone with "ding-dong" even in wrong mode.
2/ remove phone battery for 20 secs.
3/ replace battery.
4/ press and hold down home button, down-Volume & then press power for 4 secs, then release power.
5/ keep holding home and down-Volume (about 5 more secs) until screen flashes and "downloading" is displayed.
6/ release buttons, plug phone to pc, flash stock rom with odin.