After a lot of "inventions" I decided to do factory reset, the SU app icon didn't appeared so, I made the "root" process again.
This time the phone restarted once and the second time he stops trying to reboot but without success... like if some file(s) missing.
I already tried the "factory reset", everything and nothing...
The command window to "root" displays this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
By netraider at 2012-08-20
Can someone help with this?
I'm so lucky that I delete the recovery backup from the sd card...
I don't have any .kdz to try to use the UpTestEX_mod2_marwin.exe
Thanks in advance
RuedasLocas said:
Can someone help with this?
.................
.................
.................
Thanks in advance
Click to expand...
Click to collapse
OK, solved.
I download the V10a.kdz and flash it with UpTestEX_mod2_marwin.exe.
Once the phone was working, I just need to use the LG Update Tool.
But I must confess... it was scary
Guess I brick my phone
I've tried to flash a kdz rom via kdz updater, an error was ocurred. Now when I turn on the phone it only shows S/W update mode.
What I have to do? Can you help me?
Flashing via kdz updater doesnt be a good idea after all...
xavierleonelbr said:
I've tried to flash a kdz rom via kdz updater, an error was ocurred. Now when I turn on the phone it only shows S/W update mode.
What I have to do? Can you help me?
Flashing via kdz updater doesnt be a good idea after all...
Click to expand...
Click to collapse
OK... you'll need this:
v10a lgp880 europe open > http://bayfiles.com/file/bRZx/AZaxbu/.kdz_et_.dz_.dll_LGP880.v10A.rar OR http://s08.real-debrid.com/dl/74b4v284v2034363943573/.kdz_et_.dz_.dll_LGP880.v10A.rar
KDZ_FW_UPD > http://www.multiupload.com/71BMALY5J7
The .dll to flash P880 > http://csmg.lgmobile.com:9002/swdat...8/[LGFlashTool1377]LGP880_120518_Download.zip
My steps were...
1- Install "msxml" (inside KDZ_FW_UPD folder)
2- Install "Windows Enabler" (inside KDZ_FW_UPD folder)
3- Run "UpTestEX_mod2_marwin.exe" (inside KDZ_FW_UPD folder), select model .dll, you need to select "P880_120518.dll" (downloaded from the link above).
Select .kdz file "V10A_00.kdz", (downloaded from the link above)
Hit the button "Start Upgrade" and wait untill the process be complete.
4- Run the LG Tool "B2CAppSetup" and Upgrade to the newest firmware v10d (it will be made automatically by the program).
And now you should have a "clean" phone
My advice is, before you do this, turn off the phone. Press the "down volume" key and at the same time turn on the phone (it will take a while until turn on).
You should have now the "Android system recovery". with the volume key select "wipe data/factory reset", hit the I/O key to start.
After that select "reboot system now" to restart the phone.
Like that, you'll have a clean phone before you install the new firmware.
Maybe there are some other ways but this was the one I found.
Other users are able to correct or help in this process.
Hope it helps.
Ok, i'll get the kdz file and flash. Can you tell me if this method only works in version V10A? Im trying to flash the V10C from hong Kong. My model used brasilian firmware.
I flash the rom and the work stops on "3GQT : wParam = 2010, Iparam = 18"
I will back later with more information. Hope i can save my phone!
xavierleonelbr said:
Ok, i'll get the kdz file and flash. Can you tell me if this method only works in version V10A? Im trying to flash the V10C from hong Kong. My model used brasilian firmware.
I flash the rom and the work stops on "3GQT : wParam = 2010, Iparam = 18"
I will back later with more information. Hope i can save my phone!
Click to expand...
Click to collapse
if your mobile is a developer edition, you cannot upgrade using kdz updater, and a similar error is seen (reported by others trying)
but otherwise any kdz firmware should do, its all about the mobile carrier and customization and signal support.
I've dowloaded the things already. When i go home I Will flash it! Hope it works!
Sent from my LG-P990 using xda app-developers app
xavierleonelbr said:
I've dowloaded the things already. When i go home I Will flash it! Hope it works!
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Hi, I discovered that my phone was developer edition, the problem is: how to flash in this case?
23:09:22 : wParam : 2010, lParam = 18
23:09:22 : CleanModelDll() : Free Model.dll
23:09:22 : _DetachDLL Call
23:09:22 : _DetachDLL Call End
23:09:22 : Page_Error ºÎºÐÀÔ´Ï´Ù
23:09:22 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
It's some tipe of a security blocker, maybe.
xavierleonelbr said:
23:09:22 : wParam : 2010, lParam = 18
23:09:22 : CleanModelDll() : Free Model.dll
23:09:22 : _DetachDLL Call
23:09:22 : _DetachDLL Call End
23:09:22 : Page_Error ºÎºÐÀÔ´Ï´Ù
23:09:22 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
It's some tipe of a security blocker, maybe.
Click to expand...
Click to collapse
Leonel, you have a PM. Let me know something later.
Good luck
Thanks, I Hope it can solved soon.
Sent from my LG-P990 using xda app-developers app
i believe you can actually upgrade your developer edition mobiles more easily than using kdz updates.
you can simply get a dump of partitions 1,2 and 3 (boot,recovery and system) and then write those to the same position.
if you check in /dev/block/by-name
you should find SOS=p1 and LNX=p2 and USD=p3 (if i remember correct)
write dumps from a non-developer edition and it should boot just like having a custom rom made, for your models.
Right, but how can we do that? How we can discover these files?
Any idea?
Sent from my LG-P990 using xda app-developers app
xavierleonelbr said:
Right, but how can we do that? How we can discover these files?
Any idea?
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
i do not have bandwidth to help, but if someone uploads those, which might already be the case in early threads, you get lucky.
but!
remember that if you cannot use kdz files to update/recover your mobile, and if this solution is not bullitt proof, you brick your mobile, if you do something wrong.
xavierleonelbr said:
Ok, i'll get the kdz file and flash. Can you tell me if this method only works in version V10A? Im trying to flash the V10C from hong Kong. My model used brasilian firmware.
I flash the rom and the work stops on "3GQT : wParam = 2010, Iparam = 18"
I will back later with more information. Hope i can save my phone!
Click to expand...
Click to collapse
Daniel, when in "R&D Test Tool", try in "select type" to use "3GQCT - SmartPhone (WM)" instead of "CDMA - SmartPhone (WM)"
It's just an idea, for now I'm a little lost and don't have a lot of time
RuedasLocas said:
Daniel, when in "R&D Test Tool", try in "select type" to use "3GQCT - SmartPhone (WM)" instead of "CDMA - SmartPhone (WM)"
It's just an idea, for now I'm a little lost and don't have a lot of time
Click to expand...
Click to collapse
its should contain "(WM)" which is WindowsMobile model. you need the one without those WM
Dexter_nlb said:
its should contain "(WM)" which is WindowsMobile model. you need the one without those WM
Click to expand...
Click to collapse
Dexter_nlb, just curious... how much that mater? When I flash mine I chose the "CDMA - SmartPhone (WM)" option.
Thanks :good:
When I press the power button to power on, the phone automatically enter de S/W update mode.
I've tried to make an hard reset, and that is'nt worked.
Hope a method that can solve it.
---------- Post added at 08:35 AM ---------- Previous post was at 08:22 AM ----------
RuedasLocas said:
Dexter_nlb, just curious... how much that mater? When I flash mine I chose the "CDMA - SmartPhone (WM)" option.
Thanks :good:
Click to expand...
Click to collapse
Hmmmm... I will try this.
RuedasLocas said:
Dexter_nlb, just curious... how much that mater? When I flash mine I chose the "CDMA - SmartPhone (WM)" option.
Thanks :good:
Click to expand...
Click to collapse
well, what you do not know, you should not try? so i guess i just do what the remaining guides say for flashing with the kdz updaters, which is not WM, but if it matters? well, if it becomes bricked , we know one reason maybe..
Dexter_nlb said:
well, what you do not know, you should not try? so i guess i just do what the remaining guides say for flashing with the kdz updaters, which is not WM, but if it matters? well, if it becomes bricked , we know one reason maybe..
Click to expand...
Click to collapse
But once that my phone didn't get "bricked", and the behavior of the phone is exactly the same, probably means that "WM" selected its not so important...
To be honest, after get to the point, that the phone don't work, I don't care a lot about try whatever it is, once that for me it's already "bricked"...
By the way, if hardware is not damaged, how it's possible to say that a device is definitely "bricked"?
Software didn't just "born" with it... It might be hard but a solution but be somehow, sooner or later. I'm I very wrong?
Thanks all to light a little this "road" of mine
Related
Here we go ( Read all instruction and comment before start flashing ) :
1 ) Download these 3 apps: http://www.4shared.com/rar/Re4VCOAS/kdz- udpate.htm (the original link is deleted, re-uploaded by RuedasLocas)
To get KDZ file you can find it here : http://lg-phone-firmware.com/index.php?id_mod=15
2 ) Once downloads complete Extract the file (ex.: C:\KDZ\) and u will get folder like this :-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3) Install B2CTools LG ( B2CAppSetup.exe ) this file is located on the folder that yr extract before .
4) Run LGMobile update (must be on your desktop) and install the usb drivers .
5 ) Turn off yr device and remove the battery .
6 ) Now just hold down vol - key ( hold hold hold dont release !!!! ) and plug the USB cable until you get screen like this :-
7 ) Wait for while due to yr computer will install some driver . Once the install is complete find "Device Manager" > Modems > disable the LGE Mobile USB Modem on yr computer ( me using win 7 -----> start ---> computer ---> right click / and you can find device manager )
8) Run as administrator KDZ_FW_UPD.exe ( file located at step no 2 )
9) - Run as administrator Windows Enabler.exe ( file located at step no 2 ) . After run the app, an icon will appear on your tray, single-click on the icon util the "ON" text appears over the icon like this :-
10 ) Go back to KDZ, locate press on the yellow folder and locate the .kdz file that you want to flash
11) Click on "Launch Software Update"
12 ) Please see below picture !! Very important !!!! Now standby to put yr battery back !!!!!!
When the log start to run, put the battery back on. ( thanks to RuedasLocas ) im copy from u
13 ) - WAIT until your phone reboots automatically and unplug the cable , ( ALL IS DONE ) please check yr firmware on yr phone ....
- Dont care about the errorlog, it's normal
If you got only bootloop after flash .kdz, just do a hard reset:
- press and hold [vol -] and [power] until you got the "android recovery figure" and wait until they reboot again.
INFO !
When you tried to update yr LG Optimus 4x HD , the error comes " Your Device Is Not Registered Yet "
That because you're using different version than the original country and you wont receive OTA update .
The only way to get it back is by using LG software or KDZ method and install yr country's firmware.
I hope this will help for those want to update firmware via KDS
And thanks to RuedasLocas because always help if we in trouble .. Thanks bro ..............
Before start flashing please do backup first ( yr photos , Videos , music on yr SD card )
For clean install wipe yr data / factory reset !!!
Did you really need to make another thread but with pics? Honestly, I think reading is enough.
Sent from my LG-P880 using Tapatalk 2
Thanks very helpful even if it is there in another thread
Sent from my LG-P880 using xda premium
babymatteo said:
Did you really need to make another thread but with pics? Honestly, I think reading is enough.
Sent from my LG-P880 using Tapatalk 2
Click to expand...
Click to collapse
yup i think so .. because on pinned tutorial there some confusion step . If think this thread rubbish just delete it !:good:
Someone will use this thread to upgrade the firmware .. Reading + picture = :good::good::good::good:
esag21 said:
Here we go ( Read all instruction and comment before start flashing ) :
1 ) Download these 3 apps: http://www.4shared.com/rar/Re4VCOAS/kdz- udpate.htm (the original link is deleted, re-uploaded by RuedasLocas)
To get KDZ file you can find it here : http://lg-phone-firmware.com/index.php?id_mod=15
2 ) Once downloads complete Extract the file (ex.: C:\KDZ\) and u will get folder like this :-
3) Install B2CTools LG ( B2CAppSetup.exe ) this file is located on the folder that yr extract before .
4) Run LGMobile update (must be on your desktop) and install the usb drivers .
5 ) Turn off yr device and remove the battery .
6 ) Now just hold down vol - key ( hold hold hold dont release !!!! ) and plug the USB cable until you get screen like this :-
7 ) Wait for while due to yr computer will install some driver . Once the install is complete find "Device Manager" > Modems > disable the LGE Mobile USB Modem on yr computer ( me using win 7 -----> start ---> computer ---> right click / and you can find device manager )
8) Run as administrator KDZ_FW_UPD.exe ( file located at step no 2 )
9) - Run as administrator Windows Enabler.exe ( file located at step no 2 ) . After run the app, an icon will appear on your tray, single-click on the icon util the "ON" text appears over the icon like this :-
10 ) Go back to KDZ, locate press on the yellow folder and locate the .kdz file that you want to flash
11) Click on "Launch Software Update"
12 ) Please see below picture !! Very important !!!! Now standby to put yr battery back !!!!!!
When the log start to run, put the battery back on. ( thanks to RuedasLocas ) im copy from u
13 ) - WAIT until your phone reboots automatically and unplug the cable , ( ALL IS DONE ) please check yr firmware on yr phone ....
- Dont care about the errorlog, it's normal
If you got only bootloop after flash .kdz, just do a hard reset:
- press and hold [vol -] and [power] until you got the "android recovery figure" and wait until they reboot again.
INFO !
When you tried to update yr LG Optimus 4x HD , the error comes " Your Device Is Not Registered Yet "
That because you're using different version than the original country and you wont receive OTA update .
The only way to get it back is by using LG software or KDZ method and install yr country's firmware.
I hope this will help for those want to update firmware via KDS
And thanks to RuedasLocas because always help if we in trouble .. Thanks bro ..............
Before start flashing please do backup first ( yr photos , Videos , music on yr SD card )
For clean install wipe yr data / factory reset !!!
Click to expand...
Click to collapse
Thanks ，I think If this or any other articles have helped you in any way, please tell one (or many) people about us. It's good job
:thumbup: Thanks
Sent from my LG-P880 using xda premium
Thank u sooo muchh!
All tht i needed..step by step thnks a lot. now seems easier
---------- Post added at 03:28 PM ---------- Previous post was at 03:18 PM ----------
one doubt...In type> does 3GQCT matters? if so..then what do i select for Indian GSM/3G sim?
23anand23 said:
All tht i needed..step by step thnks a lot. now seems easier
---------- Post added at 03:28 PM ---------- Previous post was at 03:18 PM ----------
one doubt...In type> does 3GQCT matters? if so..then what do i select for Indian GSM/3G sim?
Click to expand...
Click to collapse
ur welcome .. enjoy with new firmware .....:highfive: just follow the instruction then everything is done smoothly ...
Hansey said:
Thanks ，I think If this or any other articles have helped you in any way, please tell one (or many) people about us. It's good job
:thumbup: Thanks
Sent from my LG-P880 using xda premium
Click to expand...
Click to collapse
Seriouslly? You realy had to quote the whole first post?
Nice tutorial thank you. :thumbup:
Gesendet von meinem LG-P880 mit Tapatalk 2
babymatteo said:
Did you really need to make another thread but with pics? Honestly, I think reading is enough.
Sent from my LG-P880 using Tapatalk 2
Click to expand...
Click to collapse
Even with pictures will appear someone with some problem...
Normal, even cause there are other settings available and required to specific kind of flashes.
The work is very good specially the intention.
Thanks @esag21 :good:
RuedasLocas said:
Even with pictures will appear someone with some problem...
Click to expand...
Click to collapse
+1. Exactly this.
I think no need to remove battery
Still work even skip step 5
I updated my firmware , just by downloading the update software and following the instructions on the screen. Didn't disable modem and didn't remove battery. As far as I can see everything works fine. Battery is a bit crazy sometimes. One night I left it 100% before I went to sleep and found it at 100% in the morning and the other night I lost around 4% which is still ok.
I do get tiny lags in some games sometimes, not sure if I'm imagining it or not, but it didn't happen before, now I'm not sure if it's bcs I didn't remove the battery or disabled modem as you described.
Also is it possible for me to reflash from v10h to v10h but now disabling modem and removing battery?
elfen.lied said:
I updated my firmware , just by downloading the update software and following the instructions on the screen. Didn't disable modem and didn't remove battery. As far as I can see everything works fine. Battery is a bit crazy sometimes. One night I left it 100% before I went to sleep and found it at 100% in the morning and the other night I lost around 4% which is still ok.
I do get tiny lags in some games sometimes, not sure if I'm imagining it or not, but it didn't happen before, now I'm not sure if it's bcs I didn't remove the battery or disabled modem as you described.
Also is it possible for me to reflash from v10h to v10h but now disabling modem and removing battery?
Click to expand...
Click to collapse
Elfen Lied, ftw!
and yeah, You can do it
reas0n said:
Elfen Lied, ftw!
and yeah, You can do it
Click to expand...
Click to collapse
and will I get anything by doing that. Since I don't seem to be having any issues right now as far as I understand android
Also why go through all that procedure of removing the battery and disabling the modem when the simple version plug and follow instructions works as well? At least it did for me.
Some program behavior depends on your own computer setting, programs and drivers. Don't mean that the tutorial is wrong cause it's not. Your all welcome to post helpful hints but please, don't flood with minor issues. Thanks
Sent from my LG-P880 using xda app-developers app
RuedasLocas said:
Some program behavior depends on your own computer setting, programs and drivers. Don't mean that the tutorial is wrong cause it's not. Your all welcome to post helpful hints but please, don't flood with minor issues. Thanks
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Well in order to be helpful here's what I did:
1. Installed LGMobile Support Tool (I'm sure you can google it )
2. Run the program and click on Install USB Driver.
3. After the driver finished downloading and installing, close the LGMobile Support Tool and plug in your phone via USB cable.
4. Now run LGMobile Support Tool again and it will start checking your device. At this time I also changed my Country by going to Options & Help ----> Country and Language.
5. After that I clicked on START UPDATING and followed the instructions.
I'd describe instructions in detail, but since my phone is already updated, the START UPDATING button is greyed out.
After the process has finished phone reboots into a new firmware which you can confirm in settings and the Tool itself confirms it.
Hope this helps!
elfen.lied said:
Well in order to be helpful here's what I did:
1. Installed LGMobile Support Tool (I'm sure you can google it )
2. Run the program and click on Install USB Driver.
3. After the driver finished downloading and installing, close the LGMobile Support Tool and plug in your phone via USB cable.
4. Now run LGMobile Support Tool again and it will start checking your device. At this time I also changed my Country by going to Options & Help ----> Country and Language.
5. After that I clicked on START UPDATING and followed the instructions.
I'd describe instructions in detail, but since my phone is already updated, the START UPDATING button is greyed out.
After the process has finished phone reboots into a new firmware which you can confirm in settings and the Tool itself confirms it.
Hope this helps!
Click to expand...
Click to collapse
Thank you for your help but, in order to avoid another messed thread like all the others, lets get stick to the topic please.
"Update firmware through flashing the kdz files"
great tutorial
Great tutorial. Thanks a lot. I didn't get any error message.
finally an updated tutorial :good:
Hey!
I have a serious problem with my Xperia Z!
First i rooted it then i installed a ROM, after the ROM i got problems with the resolution.
So i thougt i might find a tool on the market, and i did!
After installing and changing resolution i "restarted" my device.
That was the big mistake, because now it won't boot past the Sony logo.
I have tried Recovery mode, and fastboot without luck!
The phone will just shut itself off, and try to load again.
I thought it might be the "sudden death" problem with Xperia Z, but i can't install any update!
PLZ help me! I'm kind of a noob in this area, and i will NOT root again!
i guess the warrenty is broken after rooting?
appreciate all the help i can get!
artipex said:
Hey!
I have a serious problem with my Xperia Z!
First i rooted it then i installed a ROM, after the ROM i got problems with the resolution.
So i thougt i might find a tool on the market, and i did!
After installing and changing resolution i "restarted" my device.
That was the big mistake, because now it won't boot past the Sony logo.
I have tried Recovery mode, and fastboot without luck!
The phone will just shut itself off, and try to load again.
I thought it might be the "sudden death" problem with Xperia Z, but i can't install any update!
PLZ help me! I'm kind of a noob in this area, and i will NOT root again!
i guess the warrenty is broken after rooting?
appreciate all the help i can get!
Click to expand...
Click to collapse
Try SUS it may work if FT didn't. Just remember that using FT you need the phone turned OFF and not leave it ON.
shadowboy23 said:
Try SUS it may work if FT didn't. Just remember that using FT you need the phone turned OFF and not leave it ON.
Click to expand...
Click to collapse
I have tried SUS (Sony Update Service), and SonyPCcomp. I don't think i have heard of "FT"...
artipex said:
I have tried SUS (Sony Update Service), and SonyPCcomp. I don't think i have heard of "FT"...
Click to expand...
Click to collapse
FT = FlashTool
Are you using latest FT?
shadowboy23 said:
FT = FlashTool
Are you using latest FT?
Click to expand...
Click to collapse
Kinda embarrassing, but i have no idea...
I used "EasyRootingToolkit" to root, and then installed Deodex ROM using XDA.
Can FT fix my boot problem?
And i live in Norway, what ROM should i pick?
Here are a list of UNBRANDED .434 ROMs I could find:
UNBRANDED STOCK .434 ROMs
Australia Stock .434 http://forum.xda-developers.com/show....php?t=2209281
German Stock .434 http://forum.xda-developers.com/show....php?t=2216743
Hong Kong Stock .434 http://forum.xda-developers.com/show....php?t=2201801
India Stock .434 http://forum.xda-developers.com/show....php?t=2212694
Netherlands Stock .434 http://forum.xda-developers.com/show....php?t=2200945
Singapore Stock .434 http://forum.xda-developers.com/show....php?t=2233312
UK Stock .434 http://forum.xda-developers.com/show....php?t=2221475
artipex said:
Kinda embarrassing, but i have no idea...
I used "EasyRootingToolkit" to root, and then installed Deodex ROM using XDA.
Can FT fix my boot problem?
And i live in Norway, what ROM should i pick?
Here are a list of UNBRANDED .434 ROMs I could find:
UNBRANDED STOCK .434 ROMs
Australia Stock .434 http://forum.xda-developers.com/show....php?t=2209281
German Stock .434 http://forum.xda-developers.com/show....php?t=2216743
Hong Kong Stock .434 http://forum.xda-developers.com/show....php?t=2201801
India Stock .434 http://forum.xda-developers.com/show....php?t=2212694
Netherlands Stock .434 http://forum.xda-developers.com/show....php?t=2200945
Singapore Stock .434 http://forum.xda-developers.com/show....php?t=2233312
UK Stock .434 http://forum.xda-developers.com/show....php?t=2221475
Click to expand...
Click to collapse
by the sound of it you have a currupt system folder in flashtool only tick system on what to flash, this might bring your phone back to life
REMEMBER VOLUME DOWN WHEN PLUGGING USB IN GREEN LED
EDIT: Just download a 434 global
part 1
part 2
even though it says uk it is global
Maddhouse said:
by the sound of it you have a currupt system folder in flashtool only tick system on what to flash, this might bring your phone back to life
REMEMBER VOLUME DOWN WHEN PLUGGING USB IN GREEN LED
EDIT: Just download a 434 global
part 1
part 2
even though it says uk it is global
Click to expand...
Click to collapse
I understand, but what ROM should i use?
http://forum.xda-developers.com/showthread.php?t=2216743
Will this work for me? Since i live in Norway?
artipex said:
I understand, but what ROM should i use?
http://forum.xda-developers.com/showthread.php?t=2216743
Will this work for me? Since i live in Norway?
Click to expand...
Click to collapse
by all means you can try that one or i have said one in my OP and that is a global lte one so it will be fine aswell
Edit: Just had a success in another post
http://forum.xda-developers.com/showthread.php?t=2264188
Maddhouse said:
by all means you can try that one or i have said one in my OP and that is a global lte one so it will be fine aswell
Click to expand...
Click to collapse
Ok, i will try!
Thx for your help!
Hope it works!
artipex said:
Ok, i will try!
Thx for your help!
Hope it works!
Click to expand...
Click to collapse
Try flashing system first,
Untick top 3 wipe and tick all other exept system in box below
Maddhouse said:
Try flashing system first,
Untick top 3 wipe and tick all other exept system in box below
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Already got problems....
I'm not exactly good at this :/
artipex said:
View attachment 1935843
Already got problems....
I'm not exactly good at this :/
Click to expand...
Click to collapse
what windows are you on?
Maddhouse said:
what windows are you on?
Click to expand...
Click to collapse
Windows 8...That could be the problem..
You're on Win8 please read my tutorial on how to install drivers on windows 8 in my sig.
You can find the tut in part of the tutorial in my sig.
artipex said:
Windows 8...That could be the problem..
Click to expand...
Click to collapse
http://msdn.microsoft.com/en-us/library/windows/hardware/ff553484(v=vs.85).aspx
1. download flashtool and install
2. type "bcdedit /set testsigning on" in cmd and restart PC
3. install driver in the flashtool "drivers" folder, check fastboot, agree when prompts
4. type "bcdedit /set testsigning off" in cmd and restart PC
Do as what Maddhouse posted
OR
Okay since people are having trouble installing drivers for the Xperia Z in Windows 8. I made a tutorial on how to install the Xperia Z driver using the FlashTool in Windows 8.
As shown in the picture below when you try to install the drivers for the Xperia Z in Windows 8 for the first time this is what happens:
As you can see the drivers didn't install:
So here are the steps to install the drivers:
Step 1: Go to "Settings" (if you don't know how to do this, place your mouse pointer in the upper right corner or bottom right corner of your screen and the sidebar should pop out as shown in the picture below):
Step 2: Click on "Change PC settings" as shown in the picture below:
Step 3: When you get to this screen, scroll down to "Advanced start-up" and click the "Restart now" tab. See picture below:
Step 4: When your PC restarts and goes to this screen click on "Troubleshoot" as shown in the picture below:
Step 5: Now click on "Advanced options" as shown in the picture below:
Step 6: Now click on "Start-up Settings" as shown in the picture below:
Step 7: When you get to this screen, click on the "Restart" tab as shown in the picture below:
Step 8: Okay when you get to this screen just hit the "F7" on your keyboard:
Step 9: Now go and reinstall the driver for the Xperia Z. When you get this pop-up window, please select "Install this driver software anyway" as shown in the picture below:
The process will look like this:
As you can see in the last picture that the drivers are now installed.
shadowboy23 said:
You're on Win8 please read my tutorial on how to install drivers on windows 8 in my sig.
You can find the tut in part of the tutorial in my sig.
Click to expand...
Click to collapse
I have access to Win7, so i will try that first!
I have no idea what i'm doing, so i will do it the simplest way i can!
Just posted the tut above or you can do what Maddhouse suggested. But if you want to use Win7 thta's fine too.
shadowboy23 said:
Do as what Maddhouse posted
OR
Okay since people are having trouble installing drivers for the Xperia Z in Windows 8. I made a tutorial on how to install the Xperia Z driver using the FlashTool in Windows 8.
As shown in the picture below when you try to install the drivers for the Xperia Z in Windows 8 for the first time this is what happens:
As you can see the drivers didn't install:
So here are the steps to install the drivers:
Step 1: Go to "Settings" (if you don't know how to do this, place your mouse pointer in the upper right corner or bottom right corner of your screen and the sidebar should pop out as shown in the picture below):
Step 2: Click on "Change PC settings" as shown in the picture below:
Step 3: When you get to this screen, scroll down to "Advanced start-up" and click the "Restart now" tab. See picture below:
Step 4: When your PC restarts and goes to this screen click on "Troubleshoot" as shown in the picture below:
Step 5: Now click on "Advanced options" as shown in the picture below:
Step 6: Now click on "Start-up Settings" as shown in the picture below:
Step 7: When you get to this screen, click on the "Restart" tab as shown in the picture below:
Step 8: Okay when you get to this screen just hit the "F7" on your keyboard:
Step 9: Now go and reinstall the driver for the Xperia Z. When you get this pop-up window, please select "Install this driver software anyway" as shown in the picture below:
The process will look like this:
As you can see in the last picture that the drivers are now installed.
Click to expand...
Click to collapse
This is starting to get a littlebit too complicated for a unexperienced person :/
I have never done this before, and now i have no idea what order to do it in...sorry..
The TESTSIGNING boot configuration option determines whether Windows Vista and later versions of Windows will load any type of test-signed kernel-mode code. This option is not set by default, which means test-signed kernel-mode drivers will not load by default on 64-bit versions of Windows Vista and later versions of Windows.
http://msdn.microsoft.com/en-us/library/windows/hardware/ff553484(v=vs.85).aspx
Click to expand...
Click to collapse
You will still have to do it on there aswell
EDIT
artipex said:
This is starting to get a littlebit too complicated for a unexperienced person :/
I have never done this before, and now i have no idea what order to do it in...sorry..
Click to expand...
Click to collapse
No your fine here to help you can we have given you 2 ways to do it, its just becuase they are not a signed windows drivers, new windows wont install it unless you turn that part of security off
If you use "xFSTK-SoC-Driver-Setup" and "unbrick.bat" to "Unbrick your phone, and you got the "Service code corrupt" error..., This method is untested but i think it is the problem...You need This:
Original ICS FIRMWARE that come with your phone.
xFSTK-SoC-Driver-Setup Installed (read How Install "xFSTK-SoC-Driver-Setup")
Unbrick.bat and respective folders.
Motorola Handset USB Drivers (x86 or x64).
ADB/ FASTBOOT or SDK.
Steps to revive:
Extract Unbrick.zip in "C:\atomSOC"
Go to unbrick folder. "C:\atomSOC\unbrick"
Go to your firmware folder and copy this files (dnx; ifwi)
Replace this files in "C:\atomSOC\unbrick".
Press CAMERA button and Plug in the USB to your phone (MEDFIELD FLASH)
Run unbrick.bat in "C:\atomSOC"
How Install "xFSTK-SoC-Driver-Setup":
Run Setup
When Say "Intel Soc Is about to begin" Click OK
When Say "In Order to Complete (...) Will a device be attached (...)" Press Yes.
When Say "Step 1 (...)" Plug In your USB Cable to the pc. and click ok
When Say "Step 2 (...)" Press CAMERA button and Plug in the USB to your phone (MEDFIELD FLASH)
¿How know if my phone go to the medfield flash method?
release the camera button, your phone will stay in a black screen with the green led.
And your pc says "New hardware recognized"
Name of hardware: MEDFIELD
Before the driver install:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads:
Unbrick.bat + xFSTK-SoC-Driver-Setup Download
If it works.. please, let me know
Nope.
I just tried it, and it starts the download says a few numbers then carries on downloading.
Then the phone reboots and goes to the service required code corrupt screen
1994deano said:
I just tried it, and it starts the download says a few numbers then carries on downloading.
Then the phone reboots and goes to the service required code corrupt screen
Click to expand...
Click to collapse
Try again, your phone is not going to medfield flash mode correctly
I did not get the part - Go to your firmware folder and copy this files (dnx; ifwi)
How to go to firmware folder?,
I do not understand how to copy
i just re tried it and its got rid of the service required screen but now the screen is just black with the green led on
Me too samething, any sugestion?
gmpdri said:
Me too samething, any sugestion?
Click to expand...
Click to collapse
csn you boot to bootloader?? (power+vol.down)?
Nope
pangyaaaaaa said:
csn you boot to bootloader?? (power+vol.down)?
Click to expand...
Click to collapse
no that is why we are trying to use the medfield flash, as the bootloader is screwed up
1994deano said:
no that is why we are trying to use the medfield flash, as the bootloader is screwed up
Click to expand...
Click to collapse
I found some tools for intel lenovo pad, im trying to found how work, im think i can use it on razr i...
Boss442 said:
I found some tools for intel lenovo pad, im trying to found how work, im think i can use it on razr i...
Click to expand...
Click to collapse
ooh nice, let us know how you get on with it
S***, REALLY GOOD NEWS.....
RDS recognizes your phone on Medfield Mode...
Someone try to flash a firmware
Flashing Firmware dont work... ¿Maybe a custom XML Work?
HELP
For that ADB / Fastboot or SDK.?
Copying pro firmware?
saiko.sensei said:
For that ADB / Fastboot or SDK.?
Copying pro firmware?
Click to expand...
Click to collapse
if i found a way for bypass the "service required" error.. maybe you need fastboot... I am working with a lenovo pad (Intel SoC) maybe can use his flash tool to work (need fastboot). But dont recognize my phone, ¿Maybe need a custom driver? i am working in that
Yes, RSD lite recognises bricked phones, but it tries to enter fastboot mode to flash anything, so we're stuck...
Good luck!
Bricked while flashing JB Radio to ICS
hy,
i did the stupid error of flashing a jb radio fw to a ics phone, now also with this tool i only get the message "service required / code corrupt"
anny idea?
btw.: i found a gui tool that does the same thing, there you can not only upload the firmware but also an operating system (you need a fw dnx and ifwi file and a os dnx and image file) anny idea where we could get the os files? i suppose flashing both (fw and dns) would unbrick the phone in all bricking cases.
i know it has already been said, but turn off your phone and keep the camera button pressed while connecting it (if you get the service required error). if the screen stays black just run the tool.
in my case flashing an ics fw dnx leads to the device corrupt message, and flashing a jb fw dnx leads to the black screen.
Boss, you are a good man for trying to help other people. Getting something like this working in the community would be brilliant, as I've tried to communicate to others. The most help I got was from outside the RAZR i forum, most here just don't give a sh1t in helping others. I have created 2 help threads to guide people - information to help prevent further cases.
I have concluded the same - that 'unbrick.bat' fixes some problems and creates a far bigger one - the service required, code corrupt problem. I wasn't sure if I could say that directly but I've a lot of messages in my inbox about this and almost everyone arrived at that after using that unbrick. How that is still available is incredible, since it's the biggest brick-creator on here that I know.
mercurio. said:
hy,
i did the stupid error of flashing a jb radio fw to a ics phone, now also with this tool i only get the message "service required / code corrupt"
anny idea?
btw.: i found a gui tool that does the same thing, there you can not only upload the firmware but also an operating system (you need a fw dnx and ifwi file and a os dnx and image file) anny idea where we could get the os files? i suppose flashing both (fw and dns) would unbrick the phone in all bricking cases.
i know it has already been said, but turn off your phone and keep the camera button pressed while connecting it (if you get the service required error). if the screen stays black just run the tool.
in my case flashing an ics fw dnx leads to the device corrupt message, and flashing a jb fw dnx leads to the black screen.
Click to expand...
Click to collapse
You can found Ifwi and dnx in your firmware folder... download a rds firmware and you found the two files. Upload and send me the gui-tool please!
So.. You cannot downgrading ifwi and dnx, but if you use ifwi and dnx (JB) with a ICS system, you got the black screen... so the black screen brick and "service required"brick are the same brick
SharpnShiny said:
Boss, you are a good man for trying to help other people. Getting something like this working in the community would be brilliant, as I've tried to communicate to others. The most help I got was from outside the RAZR i forum, most here just don't give a sh1t in helping others. I have created 2 help threads to guide people - information to help prevent further cases.
I have concluded the same - that 'unbrick.bat' fixes some problems and creates a far bigger one - the service required, code corrupt problem. I wasn't sure if I could say that directly but I've a lot of messages in my inbox about this and almost everyone arrived at that after using that unbrick. How that is still available is incredible, since it's the biggest brick-creator on here that I know.
Is your phone bricked in this condition right now? If it is, feel free to PM me.
Click to expand...
Click to collapse
My phone isn't bricked, i know people that unbrick.bat work right, but some people brick your phone, so i know this is a "Most devices problem" (Firmware problem, work for people that IFWI and dnx are extracted from the same firmware that are using)
Unbrick.bat provides a tool can flash some files (IFWI & DNX) to the phone (These files are responsible for the brick) and i only im working with the same tool that can solve the problem, unbrick.bat (or xFSTK-Downloader) is a good tool, but the use brick the phone, example: if i solve my downgrading brick , and i upload my files (Unbrick.bat with ifwi and dnx) this work only for people with use my firmware (example: Orange ICS), for other people that uses other firmware (Claro Argentina) the phone bricks and show "Service required blah blah blah" im trying to go back to the original "ifwi and dnx" files, some people on other forums says that the phone dont show anymore the "service required" error... but the phone only shows a green led (same thing that downgrading brick).
xFSTK-Downloader is used to update the Orange sandiego (First Intel Atom android, dont use fastboot) and Ienovo pad (Use xFSTK-Downloader-GUI, and a "Flashtool").
xFSTK-Downloader is like a Odin for intel phones. sorry for my english but if you know spanish pm me and can explain more
I read 80 pages in modaco for intel san diego and 40 for Ienovo pad, and they uses xFSTK-Downloader to update the phones.
Boss442 said:
You can found Ifwi and dnx in your firmware folder... download a rds firmware and you found the two files. Upload and send me the gui-tool please!
So.. You cannot downgrading ifwi and dnx, but if you use ifwi and dnx (JB) with a ICS system, you got the black screen... so the black screen brick and "service required"brick are the same brick
My phone isn't bricked, i know people that unbrick.bat work right, but some people brick your phone, so i know this is a "Most devices problem" (Firmware problem, work for people that IFWI and dnx are extracted from the same firmware that are using)
Unbrick.bat provides a tool can flash some files (IFWI & DNX) to the phone (These files are responsible for the brick) and i only im working with the same tool that can solve the problem, unbrick.bat (or xFSTK-Downloader) is a good tool, but the use brick the phone, example: if i solve my downgrading brick , and i upload my files (Unbrick.bat with ifwi and dnx) this work only for people with use my firmware (example: Orange ICS), for other people that uses other firmware (Claro Argentina) the phone bricks and show "Service required blah blah blah" im trying to go back to the original "ifwi and dnx" files, some people on other forums says that the phone dont show anymore the "service required" error... but the phone only shows a green led (same thing that downgrading brick).
xFSTK-Downloader is used to update the Orange sandiego (First Intel Atom android, dont use fastboot) and Ienovo pad (Use xFSTK-Downloader-GUI, and a "Flashtool").
xFSTK-Downloader is like a Odin for intel phones. sorry for my english but if you know spanish pm me and can explain more
I read 80 pages in modaco for intel san diego and 40 for Ienovo pad, and they uses xFSTK-Downloader to update the phones.
Click to expand...
Click to collapse
I found out that the tool I ment is the xFSTK-Downloader ( rghost.net/44421368 ) that was alreaddy linked here at xda by U1138 in: http://forum.xda-developers.com/showthread.php?t=2184877
And yes, i suppose the black screen only and the service required brick are the same. they probably are due to a not working combination of firmware (ifwi & dnx) and flashed OS (i suppose the fastboot, no idea how where to get the dnx file needed for flashing it). you can try different ifwi and dnx files and get different results (so far i think there are only two types, the ones for JB fw and the others for ICS).
If you flash your rom with RSD going from JB to ICS you also flash the ifwi & dnx files, but not the bootloader. Therefore you end up with a non working combination of firmware (ifwi) and OS (fastboot) => nothing starts at all.
This problem was easy to fix for me flashing the appropriate JB firmware.
Then I did the mistake of flashing the JB radio before flashing a JB rom. This lead to a situation where neither the JB (leads to service required warning) nor the ICS (black screen, green led on) firmware works anymore and I have no idea how i could change the situation.
Anyone has some ideas how to flash the fastboot with the xFSTK-Downloader?
mercurio. said:
Anyone has some ideas how to flash the fastboot with the xFSTK-Downloader?
Click to expand...
Click to collapse
+ 1
Everything else I was try with U 1138`s help - without result
St.Noigel said:
+ 1
Everything else I was try with U 1138`s help - without result
Click to expand...
Click to collapse
I read more than 120 pages in forums, and... NOTHING!
But i'm triyng to port a "flash tool" from lenovo pad... :silly:
Honor 6 H60-L04 ROOTING METHOD
Step by Step (Even newbies can easily follow)
Standard Disclaimer: You are rooting your device on your own risk, responsibility and consequences. I am NOT responsible if your device is bricked, or your house burns down on Step 6 - just kidding.
Thanks to @VirusPlus for his Multi-Tool, @warea for invaluable advice.
STEP 1:
NOTE: This method to unlock bootloader does not seem to work anymore. Click the button below and use either of these two methods instead:
jusumgeezer said:
*SOLVED*
For anybody struggling to unlock the Bootloader site, I finally managed to get it working.
Using incognito mode in chrome I went to the emui homepage, & translated with Google.
Then selected my phone Honor 6plus PE-TL10.
On the download page there is a link for unlocking. This took me to the homepage & I selected "log in with Facebook" It asked me to create a nickname, then took me back to the unlock page.
Here I was able to select smartphone in the first drop down box. The second box kept coming up empty & took a while for the page to load the list of phones.
However I was able to choose the correct model without trying to edit the page info.
I used IMEI from sim #1 was instantly given the code in red text at the bottom of the page.
Just be patient when using teanslate as the page may still be loading. Also don't expect a new page or window to open up with the code. Mine just appeard at the bottom & you could easily miss it.
Remember :-
*email login doesn't work
*phone number login doesn't work (Chinese numbers only)
*use incognito mode or clear cache/history/cookies
*use Facebook to log register a new account
*go to the site via the homepage not the link
*be patient using translate (page loads slow)
*profit ��
Click to expand...
Click to collapse
ike101 said:
you have to send an email [to [email protected]] like this:
Dear Sir or Madam,
I am not able to generate my bootloader unlock code for my Honor 6. Please send me the unlock code for my device:
Model: H60-L/02/12/04
SN: XXXXXXXXXXXXXXX
IMEI: XXXXXXXXXXXXXXX
Product ID: XXXXXXXX
Thanks for your assistance
Kind Regards
Your Name
Click to expand...
Click to collapse
(use google chrome to translate):
http://www.emui.com/plugin.php?id=unlock&mod=detail
Choose your model from the drop down list.
Fill in the rest of the fields:
To get your Product SN: Settings> About phone> Status > here you can find the serial number.
To get your IMEI: On your dialpad enter: *#06#
(These two you can also get on the box your phone came in)
To get your Product ID: On your dialpad enter: *#*#1357946#*#*
Now enter the security code and click submit.
Your unlock code will be at the bottom in red. Copy it, write it down or save it.
STEP 2:
Download, unzip and open the Honor 6 Multi Tool folder.
Extract the file SuperSU.zip from the 'Tools' folder and put it on your phone's SD Card.
Make sure you have the phone drivers installed on your computer (if you have connected thru USB before, or installed the HiSuite, you should be fine)
STEP 3:
On your phone, enable developer mode. (Go to Setting>About Phone>Click on Build Number 8 times.) Then go to settings>Developer Options and enable USB Debugging.
STEP 4:
Power off your phone and now press Volume Down and connect USB to computer (while pressing volume down) to enter Fastboot mode:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
STEP 5:
On your computer, run the Multi-Tool.
Choose 1 - Unlock Bootloader. Enter the code you got in step 1 and hit enter. Your device will now be unlocked.
If it says 'waiting for device' then disconnect and reconnect in fastboot mode - volume down then connect USB - the multi-tool should now complete its process.
Now go to Step two in the Multi Tool. - Install CWM. (option 1). This will take a few minutes.
Now restart phone - you can boot into CWM by pressing Volume Up+ Power and choose to save a backup of your phone system and data before it is rooted. Might come in handy later. This will take some time.
Reboot into fastboot and this time choose root (option 3) on the multi tool.
If your phone is stuck in fastboot at any time don't panic! Press Volume up + Volume Down + Power all at the same time and your phone will reboot.
STEP 6:
You can now boot into CWM on your phone (Volume Up+Power) and go to 'Install Zip from SD Card' option and choose the SuperSU.zip from your SD card and install it. Select reboot. The phone may ask "Root may be lost! Restore root Now?" Select 'No'.
Restart the phone and if you have the SuperSU app on your homescreen you are now rooted. Go to playstore and update SuperSU (if required)
Aaaaaand you're done!!!
.
.
.
.
.
HAVE FUN!!!
.
.
.
.
NOTE: You can always go back to stock recovery by using the Multi tool again. The Multi Tool now includes a stock recovery for the H60-L04 as well.
H60L02
Does this procedure work for H60-L02?
itsnotmeatall said:
Honor 6 H60-L04 ROOTING METHOD
Step by Step (Even newbies can easily follow)
Standard Disclaimer: You are rooting your device on your own risk, responsibility and consequences. I am NOT responsible if your device is bricked, stoned, or rocked.
Thanks to @VirusPlus for his Multi-Tool, @warea for invaluable advice, @pudup and @VargheseJohn for being the intrepid explorers that they are and trying out this rooting method first.
STEP 1:
Go to:
http://en.club.vmall.com/emotiondownload.php?mod=unlock&action=pre
OR
If at all this site does not work, you can try the Chinese site (use google chrome to translate):
http://www.emui.com/plugin.php?id=unlock&mod=detail
Click on Product type - pick smartphone.
Then click on product model and select any of them. (H60-L04 will not be available as in above image. Don't worry, we can change that)
Right click in the field of the product model and choose inspect element.
In the HTML code look for the product you just selected: eg HUAWEI C8812. Rename it to your product model, H60-L04.
Fill in the rest of the fields:
To get your Product SN: Settings> About phone> Status > here you can find the serial number.
To get your IMEI: On your dialpad enter: *#06#
(These two you can also get on the box your phone came in)
To get your Product ID: On your dialpad enter: *#*#1357946#*#*
Now enter the security code and click submit.
Your unlock code will be at the bottom in red. Copy it, write it down or save it.
STEP 2:
Download, unzip and open the Honor 6 Multi Tool folder.
Extract the file SuperSU.zip from the 'Tools' folder and put it on your phone's SD Card.
Make sure you have the phone drivers installed on your computer (if you have connected thru USB before, or installed the HiSuite, you should be fine)
STEP 3:
On your phone, enable developer mode. (Go to Setting>About Phone>Click on Build Number 8 times.) Then go to settings>Developer Options and enable USB Debugging.
STEP 4:
Power off your phone and now press Volume Down and connect USB to computer (while pressing volume down) to enter Fastboot mode:
STEP 5:
On your computer, run the Multi-Tool.
Choose 1 - Unlock Bootloader. Enter the code you got in step 1 and hit enter. Your device will now be unlocked.
If it says 'waiting for device' then disconnect and reconnect in fastboot mode - volume down then connect USB - the multi-tool should now complete its process.
Now go to Step two in the Multi Tool. - Install CWM. (option 1). This will take a few minutes.
Now restart phone - you can boot into CWM by pressing Volume Up+ Power and choose to save a backup of your phone system and data before it is rooted. Might come in handy later. This will take some time.
Reboot into fastboot and this time choose root (option 3) on the multi tool.
If your phone is stuck in fastboot at any time don't panic! Press Volume up + Volume Down + Power all at the same time and your phone will reboot.
STEP 6:
You can now boot into CWM on your phone (Volume Up+Power) and go to 'Install Zip from SD Card' option and choose the SuperSU.zip from your SD card and install it. Select reboot. The phone may ask "Root may be lost! Restore root Now?" Select 'No'.
Restart the phone and if you have the SuperSU app on your homescreen you are now rooted. Go to playstore and update SuperSU (if required)
Aaaaaand you're done!!!
.
.
.
.
.
HAVE FUN!!!
.
.
.
.
NOTE: You can always go back to stock recovery by using the Multi tool again. The Multi Tool now includes a stock recovery for the H60-L04 as well.
Click to expand...
Click to collapse
giac96 said:
Does this procedure work for H60-L02?
Click to expand...
Click to collapse
Yes it should, process is same. Just be careful when writing your model number in the unlock bootloader step, and when restoring stock recovery from multi-tool.
Thanks itsnotmeatall , well done, hopfully it works for H60-l02, and please, if any one tested it in H60-l02 tell us the results.
Regards.
This procedure works fine on H60-L02
subrban said:
Thanks itsnotmeatall , well done, hopfully it works for H60-l02, and please, if any one tested it in H60-l02 tell us the results.
Regards.
Click to expand...
Click to collapse
I used procedure described above and it works. I unlocked bootloader, upgraded EMUI from 2.3 to 3.0, installed TWRP recovery and root phone successfully. All works fine.
Thanks ,appreciate it
Dear Brothers,
I am getting some problem in unlocking the boot-loader. Though I will like to be specific that I am not new to all these things but honestly speaking it seems tough to the purpose. I have purchased the device Honor 6 (H60-L04) on 31st Jan 2015 from FlipKart.com, India.
Problem:- Getting Incorrect Product ID on Huawei Website.
Screenshot:-
Now I did all the procedure, very carefully but then the error in red is coming. So requesting you all to help me out in this.
Image has been added for the reference of the error.
Thanks & Regards
BOND
SuperDroid-BOND said:
Dear Brothers,
I am getting some problem in unlocking the boot-loader. Though I will like to be specific that I am not new to all these things but honestly speaking it seems tough to the purpose. I have purchased the device Honor 6 (H60-L04) on 31st Jan 2015 from FlipKart.com, India.
Problem:- Getting Incorrect Product ID on Huawei Website.
Screenshot:-
Now I did all the procedure, very carefully but then the error in red is coming. So requesting you all to help me out in this.
Image has been added for the reference of the error.
Thanks & Regards
BOND
Click to expand...
Click to collapse
Are you sure you entered all the fields correctly?
Common mistake: <option value="HUAWEI C8812">H60-L04</option>
Correct entry: <option value="H60-L04">H60-L04</option>
Also clear cache etc in your browser
itsnotmeatall said:
Are you sure you entered all the fields correctly?
Common mistake: <option value="HUAWEI C8812">H60-L04</option>
Correct entry: <option value="H60-L04">H60-L04</option>
Also clear cache etc in your browser
Click to expand...
Click to collapse
Thanks a lot for your reply brother, but still after clearing cache and writing correct entry instructed by you, I am getting " The information you are looking are not found. Please mail us on [email protected]. We will respond to you shortly."
Now is there anything that I need to do correctly.
Thanks & Regards
BOND
SuperDroid-BOND said:
Thanks a lot for your reply brother, but still after clearing cache and writing correct entry instructed by you, I am getting " The information you are looking are not found. Please mail us on [email protected]. We will respond to you shortly."
Now is there anything that I need to do correctly.
Thanks & Regards
BOND
Click to expand...
Click to collapse
Go through this thread from the beginning, there are a lot of people who had this problem... all the solutions are there. You can also try the Chinese unlock site (using Google translate) maybe that will work.
itsnotmeatall said:
Go through this thread from the beginning, there are a lot of people who had this problem... all the solutions are there. You can also try the Chinese unlock site (using Google translate) maybe that will work.
Click to expand...
Click to collapse
i have the same problem, can't solve yet. ...
SuperDroid-BOND said:
Thanks a lot for your reply brother, but still after clearing cache and writing correct entry instructed by you, I am getting " The information you are looking are not found. Please mail us on [email protected]. We will respond to you shortly."
Now is there anything that I need to do correctly.
Thanks & Regards
BOND
Click to expand...
Click to collapse
Tabo8226 said:
i have the same problem, can't solve yet. ...
Click to expand...
Click to collapse
Had the same problem with you guys, but the problem fixed when I use internet explorer (windows 7).
hope this help.
Fmlover said:
Had the same problem with you guys, but the problem fixed when I use internet explorer (windows 7).
hope this help.
Click to expand...
Click to collapse
no, same with IE, i'll write you s/n, product ID and imei and can you check it? maybe i'm doing something wrong?
Tabo8226 said:
no, same with IE, i'll write you s/n, product ID and imei and can you check it? maybe i'm doing something wrong?
Click to expand...
Click to collapse
okay I'll help you.
please provide both s/n which is on the box and in setting-about phone-status.
or you can email to : [email protected]
using this template and send this email with high priority:
Subject: URGENT Request Bootloader Unlock Code.
Dear Sir/Madam
Please may I request the bootloader unlock code for my Huawei Honor 6?
Here are some Details:
Serial Number: (Found under the battery) (it is abbreviated to S/N)
IMEI: (Found with the Serial number under the battery)
MAC: (Found with the serial number under the battery)
Baseband: 2030
Please could you send me the code directly, as I cannot access the product ID on my device.
Thank You
(Your Name)
Click to expand...
Click to collapse
Fmlover said:
okay I'll help you.
please provide both s/n which is on the box and in setting-about phone-status.
or you can email to : [email protected]
using this template and send this email with high priority:
Click to expand...
Click to collapse
i have writted you, and huawei too...
Fmlover said:
okay I'll help you.
please provide both s/n which is on the box and in setting-about phone-status.
or you can email to : [email protected]
using this template and send this email with high priority:
Click to expand...
Click to collapse
Very Unfortunate to say that nothing is working for me as well. Tried with different browsers, cleared history, cache, cookies but nothing. On Chinese site its saying IMEI & S/N not matching while its matching with the one on box and in about phone. Written 2 mails yet to Huawei but no reply yet from last 2 days.
Don't know what to expect now.
BTW Thank You very much for your reply and help brother. Grateful to you.
Thanks & Regards
BOND
Had the same problem with IE, Firefox and Chrome but I was able to solve it. Do all the steps mentioned in the first post ( I tried the english site), but in the dropdown list, after changing it to H60-L04, select a different model and then select H60-L04 again. Then I entered IMEI SV instead of IMEI, clicked "submit", got an error message, then entered correct IMEI and I got my unlock code.
SuperDroid-BOND said:
Very Unfortunate to say that nothing is working for me as well. Tried with different browsers, cleared history, cache, cookies but nothing. On Chinese site its saying IMEI & S/N not matching while its matching with the one on box and in about phone. Written 2 mails yet to Huawei but no reply yet from last 2 days.
Don't know what to expect now.
BTW Thank You very much for your reply and help brother. Grateful to you.
Thanks & Regards
BOND
Click to expand...
Click to collapse
I'll try to help you also, please provide me the detail information about your phone.
Already PM-ed Tabo8226 for the unlock bl code. :good:
Fmlover said:
I'll try to help you also, please provide me the detail information about your phone.
Already PM-ed Tabo8226 for the unlock bl code. :good:
Click to expand...
Click to collapse
he gave me unlock code without problems, i think there is COUNTRY restriction maybe? IDK, but FMLOVER gave me unlock code for my HUAWEI
Tabo8226 said:
he gave me unlock code without problems, i think there is COUNTRY restriction maybe? IDK, but FMLOVER gave me unlock code for my HUAWEI
Click to expand...
Click to collapse
Well Idk really, but my problem fixed when I am using IE..
Superdroid-Bond, I already gave you the code please check your PM.
Enjoy guys :good:
Hi guys i need someone to upload latest official V20C rom (open euro ita or ger) because i cant download it from LG Firmware site and the one i have when i flash it auto brightness isnt working (i checked everything is ok with hardwer just software problem prob bad copy or whatever).Thanks
Please Check HERE
These are only .kdz
Direct download ITALY
(Please refresh direct link, If download does not start OR click on link and press Enter Key)
Salman Al-Badgail said:
Please Check HERE
These are only .kdz
Direct download ITALY
(Please refresh direct link, If download does not start OR click on link and press Enter Key)
Click to expand...
Click to collapse
Thank you trick with enter helped me
dimi89 said:
Thank you trick with enter helped me
Click to expand...
Click to collapse
great :good:
InterrtuptoR said:
Unfortunately u didnt tag me xD i made a mistake when i created my name so im not interruptor xD
Iam now on v20c and things didnt change much on cm11, ril droped and nfc is buggy, nfc isnt a problem that much after a couple of restarts it works it just freezes device for less then a minute and then works, but after one reboot it worked better, it switched on/of faster, but ril dropped... i need stable ril now so im back to stock where everything works fine...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-P880 using Tapatalk
Click to expand...
Click to collapse
Phil_Smith said:
Oh, nevermind: Thanks @Salman Al-Badgail
Click to expand...
Click to collapse
Salman Al-Badgail said:
great :good:
Click to expand...
Click to collapse
OK..., take time to check : LGExtract.exe -kdz V20C_00.kdz
Then just open resulting cab for .dz_verification: "LGP880AT-00-V20c-EUR-XXX-OCT-07-2014+0.dz"
If needed I can upload it.
oF2pks said:
OK..., take time to check : LGExtract.exe -kdz V20C_00.kdz
Then just open resulting cab for .dz_verification: "LGP880AT-00-V20c-EUR-XXX-OCT-07-2014+0.dz"
If needed I can upload it.
Click to expand...
Click to collapse
So you think i dont have the right v20c?
Where can i find the lgextract.exe?
InterrtuptoR said:
So you think i dont have the right v20c?
Where can i find the lgextract.exe?
Click to expand...
Click to collapse
Check here for LGExtract.exe
I am not sure if this help you or not.
oF2pks said:
OK..., take time to check : LGExtract.exe -kdz V20C_00.kdz
Then just open resulting cab for .dz_verification: "LGP880AT-00-V20c-EUR-XXX-OCT-07-2014+0.dz"
If needed I can upload it.
Click to expand...
Click to collapse
I have the same dz...
@InterrtuptoR now your main problem is about ril and nfc ??? Please confirm. Please change firmware to v20A and give a shot and let us know, also try changing SIM so that we can come to conclusion
Salman Al-Badgail said:
@InterrtuptoR now your main problem is about ril and nfc ??? Please confirm
Click to expand...
Click to collapse
Mainly ril, i dont use nfc that much...
Im on stock now and everything is fine...
Sent from my LG-P880 using Tapatalk
@InterrtuptoR For RIL you can change firmware to either v20b or v20a and also try changing sim card and please check. For bad network some time sim card that too old might create a problem, anyway give a shot and please do report so that we can see what else we can do for you. For now I am sleeping its already late. will get back to you after next 12-14hr
Thanks
Salman Al-Badgail said:
@InterrtuptoR For RIL you can change firmware to either v20b or v20a and also try changing sim card and please check. For bad network some time sim card that too old might create a problem, anyway give a shot and please do report so that we can see what else we can do for you.
Thanks
Click to expand...
Click to collapse
I was on 20b, now on 20c, will try 20a and change sim, but i think its not the hardware cause all works on stock...
If it was the sim it wouldnt work on stock, right? I dont have time now to try all that, but will report when i try...
Sent from my LG-P880 using Tapatalk
@InterrtuptoR sure give a try, Thanks
@Phil_Smith @InterrtuptoR , after many readings:
http://forum.xda-developers.com/search/thread/2780274?query=02.1233
http://forum.xda-developers.com/showthread.php?t=2329768
it looks logical that your AboutPhone/screen indicates a v20c/01.1233 firmware different from last kdz flashed...; if not : it means you used a "tricky" method to upgrade to v20c_00.kdz...
FIRST (lucky? ) remove your battery for few and reboot back to check changes in AboutPhone/screen for KitKat minimum;
CHECK BEST: http://forum.xda-developers.com/optimus-4x-hd/general/lg-p880-firmware-flash-upgrade-t2919195
(I remember I used odd ref http://forum.xda-developers.com/showthread.php?t=2069723 with v20d/02.1216.01)
@dimi89 can you upgrade this thread/title with cleared ref V20c-EUR-XXX-OCT-07-2014
Download mirror for official LG2014 v20c_00.kdz (zipped) & P880-Flashtools.rar : https://www.androidfilehost.com/?w=files&flid=128886
@oF2pks Appreciate Man for uploading .kdz This might help many users. Also upload any v10xyz for ICS stock user like a complete package.
Thanks again
oF2pks said:
@Phil_Smith @InterrtuptoR , after many readings:
http://forum.xda-developers.com/search/thread/2780274?query=02.1233
http://forum.xda-developers.com/showthread.php?t=2329768
it looks logical that your AboutPhone/screen indicates a v20c/01.1233 firmware different from last kdz flashed...; if not : it means you used a "tricky" method to upgrade to v20c_00.kdz...
FIRST (lucky? ) remove your battery for few and reboot back to check changes in AboutPhone/screen for KitKat minimum;
CHECK BEST: http://forum.xda-developers.com/optimus-4x-hd/general/lg-p880-firmware-flash-upgrade-t2919195
(I remember I used odd ref http://forum.xda-developers.com/showthread.php?t=2069723 with v20d/02.1216.01)
@dimi89 can you upgrade this thread/title with cleared ref V20c-EUR-XXX-OCT-07-2014
Download mirror for official LG2014 v20c_00.kdz (zipped) & P880-Flashtools.rar : https://www.androidfilehost.com/?w=files&flid=128886
Click to expand...
Click to collapse
First of all thanks for all your research and help!
Sadly the LG Mobile Support Tool always stops saying "Upgrade stopped due to an error".
Anything I can do?
Edit: And thinking that it might have to do with Windows version (running Windows 10 x64), I tried using a virtual machine emulating Win 7 x64, but here it says "Cannot connect to server"...
(usual at your own risks...)
Phil_Smith said:
First of all thanks for all your research and help!
Sadly the LG Mobile Support Tool always stops saying "Upgrade stopped due to an error".
Anything I can do?
Edit: And thinking that it might have to do with Windows version (running Windows 10 x64), I tried using a virtual machine emulating Win 7 x64, but here it says "Cannot connect to server"...
Click to expand...
Click to collapse
( @InterrtuptoR )
Remember that .kdz is LG' file_support for upgrade/init firmware; the good is that the Win dll/flash is included in the .kdz (better option than tricky .dz flash): check whole thread http://forum.xda-developers.com/optimus-4x-hd/general/lg-p880-firmware-flash-upgrade-t2919195
- use CSE flash with custom rom
(- OR restore a JB nandroid and then use NORMAL flash for an upgrade on JB)
If trouble :
-FIRST (lucky ?) : try another usb cable
-HARD : format via cwm and proceed http://forum.xda-developers.com/showthread.php?t=2069723
I'm pretty sure @dimi89 just went threw this; he is an early p880' user and will help for steps or different way (?)
Once done, you need to flash cwm and a custom rom to check that AboutPhone/baseband is showing exact kdz :"LGP880AT-00-V20c-EUR-XXX-OCT-07-2014" and not the version firmware 02.1233, ie a different kdz origin.
(Under resulting LG JB, the AboutPhone/os firmware indication is always the rom in use, not the original kdz, so it always looks good even if not...like old 2013 V20C or remix... )
oF2pks said:
( @InterrtuptoR )
Remember that .kdz is LG' file_support for upgrade/init firmware; the good is that the Win dll/flash is included in the .kdz (better option than tricky .dz flash): check whole thread http://forum.xda-developers.com/optimus-4x-hd/general/lg-p880-firmware-flash-upgrade-t2919195
- use CSE flash with custom rom
(- OR restore a JB nandroid and then use NORMAL flash for an upgrade on JB)
If trouble :
-FIRST (lucky ?) : try another usb cable
-HARD : format via cwm and proceed http://forum.xda-developers.com/showthread.php?t=2069723
I'm pretty sure @dimi89 just went threw this; he is an early p880' user and will help for steps or different way (?)
Once done, you need to flash cwm and a custom rom to check that AboutPhone/baseband is showing exact kdz :"LGP880AT-00-V20c-EUR-XXX-OCT-07-2014" and not the version firmware 02.1233, ie a different kdz origin.
(Under resulting LG JB, the AboutPhone/os firmware indication is always the rom in use, not the original kdz, so it always looks good even if not...like old 2013 V20C or remix... )
Click to expand...
Click to collapse
Thanks for your response!
"-FIRST (lucky ?) : try another usb cable"
Tried another one, but the errors stay the same. I also know that the cable I use worked for data transfer before.
"-HARD : format via cwm and proceed http://forum.xda-developers.com/showthread.php?t=2069723"
I tried that, but the LG software update tool keeps saying "phone not found"... Tried an 2.0 usb port at the back of my PC and also here tried a different cable - the error persists.
Phil_Smith said:
Thanks for your response!
"-FIRST (lucky ?) : try another usb cable"
Tried another one, but the errors stay the same. I also know that the cable I use worked for data transfer before.
"-HARD : format via cwm and proceed http://forum.xda-developers.com/showthread.php?t=2069723"
I tried that, but the LG software update tool keeps saying "phone not found"... Tried an 2.0 usb port at the back of my PC and also here tried a different cable - the error persists.
Click to expand...
Click to collapse
Okay, I tried it on a PC that natively runs Windows 7 and of course again the Windows version caused the mess... On that 7 machine everything went smoothly (although the "Cannot connect to server" error persisted, I was able to ignore it, as the program proceeded in the background).
Really to all of you having issues with upgrading LG software and running Windows 8 or higher:
Do not waste hours and simply try on a Windows 7 machine!
I remember having had troubles likes that before on win 8.1 , where the only solution in the end had been the same... it can drive you mad, so just please skip that!
Now I'm on cm11 nightly and "about phone" still shows L6260_MODEM_SIC_02.1233.00 under Baseband-Verison ...
Phil_Smith said:
Okay, I tried it on a PC that natively runs Windows 7 and of course again the Windows version caused the mess... On that 7 machine everything went smoothly (although the "Cannot connect to server" error persisted, I was able to ignore it, as the program proceeded in the background).
Really to all of you having issues with upgrading LG software and running Windows 8 or higher:
Do not waste hours and simply try on a Windows 7 machine!
I remember having had troubles likes that before on win 8.1 , where the only solution in the end had been the same... it can drive you mad, so just please skip that!
Now I'm on cm11 nightly and "about phone" still shows L6260_MODEM_SIC_02.1233.00 under Baseband-Verison ...
Click to expand...
Click to collapse
I'm now on @csk1jw 's new 7.1 ROM where my baseband version now shows the correct "LGP880AT-00-V20c-EUR-XXX-OCT-07-2014" which seems to be good, right?
GetRIL though still says "unknown RIL", but I'm not sure if that's just normal.