Samsung Vibrant Front Facing Camera Modification
for CyanogenMod 10
For people with the FFC mod on the Vibrant, this is a CWM flashable ZIP that will work with the latest CM10 nightlies to enable FFC support.
Requirements
Samsung Vibrant, Model SGH-T959
Front Facing Camera hardware modification: Replace the internal phone camera with a i9000 camera
An AOSP JB ROM post-data/system partition swap (details about how to tell below)
Instructions
Copy file to SD card
Reboot into recovery
(Optional) Flash the ROM zip if you are upgrading to a newer ROM
Flash this ZIP
Reboot
Open up camera app. If it worked you will have a button just above the zoom slider to switch between front and rear cameras.
Compatible ROMs
- CyanogenMod 10 Nightly Builds 20120927 and later
- Helly Bean ??? and after
Non-Compatible ROMs
These ROMs do not work with this zip. If you are using any of these you may try using the CM9 files available here.
- CyanogenMod 10 20120926 or earlier
- Helly Bean ??? or earlier
If you have tested a ROM and would like to add it to the list please reply below!
How do I know if my ROM has the system/data partitions swapped?
Open up a shell, through ADB, Terminal Emulator, Connectbot, etc. Type the command
Code:
mount
and hit enter. Look for the line that mentions /system (it's a lot of jumble, I know! It's in there.) If you have the swap (and therefore are able to use this zip, you should see a line that look like this:
Code:
/dev/block/mmcblk0p2 /system ext4 rw,nodev,noatime, . . . . .
If you do not see mmcblk0p2 next to /system this mod is not for you! The non-compatible ROMs will say mtdblock2 next to system.
is this different from the cm9 ffc fix files or the same?
mryounghc said:
is this different from the cm9 ffc fix files or the same?
Click to expand...
Click to collapse
Different. If you try the CM9 FFC files you're gonna have a bad time.
OK reason I asked is because I have always used the cm9 without a problem on jb. Well, I never actually USED it in months but I am able to switch back and forth. I'll try this one out though
mryounghc said:
OK reason I asked is because I have always used the cm9 without a problem on jb. Well, I never actually USED it in months but I am able to switch back and forth. I'll try this one out though
Click to expand...
Click to collapse
The old one would likely have worked on CM10 up until recently, since any changes to camera were pretty minor between ICS and JB. However, with the recent system/data partition switcheroo the old zip could potentially screw things up.
chui101 said:
For people with the FFC mod on the Vibrant, here is a CWM flashable ZIP that will work with the latest CM10 nightlies to enable FFC support.
Just copy this file to the SD card and flash this after the nightly.
Enjoy!
Click to expand...
Click to collapse
Will this work with SlimBean 2.1 ?
UPDATE : It works!
I can confirm that the CM9 fix no longer works with CM10. I don't know that it caused issues after flashing but it didn't work. Hadn't put the time in to figure it out but thanks to chui101 I don't have to!
FFC
chui101 said:
For people with the FFC mod on the Vibrant, here is a CWM flashable ZIP that will work with the latest CM10 nightlies to enable FFC support.
Just copy this file to the SD card and flash this after the nightly.
Enjoy!
Click to expand...
Click to collapse
Unfortunately it did not work with the Helly Bean 817 version of CM10. Can someone send a couple of screenshots of the what the camera screen is supposed to look like? I have a compass-like icon in the upper left corner, but when I tap it - I just get a focus setting at that point. Never have fired up the FFC and don't know if it was DOA or not. Thanks.
JIM in FLA
tenantrep said:
Unfortunately it did not work with the Helly Bean 817 version of CM10. Can someone send a couple of screenshots of the what the camera screen is supposed to look like? I have a compass-like icon in the upper left corner, but when I tap it - I just get a focus setting at that point. Never have fired up the FFC and don't know if it was DOA or not. Thanks.
JIM in FLA
Click to expand...
Click to collapse
It will ONLY work with CM10. Helly bean does not have the new partition layout - You can probably use the CM9 zip with that.
the old one works with hellybean
mryounghc said:
the old one works with hellybean
Click to expand...
Click to collapse
Thanks for letting me know. I've updated the OP to be more informative!
chui101 said:
It will ONLY work with CM10. Helly bean does not have the new partition layout - You can probably use the CM9 zip with that.
Click to expand...
Click to collapse
OK great, can you provide a link? Thanks.
tenantrep said:
OK great, can you provide a link? Thanks.
Click to expand...
Click to collapse
I took the time to type out a detailed OP, if you can't read it, then no I won't provide you a link.
mryounghc said:
the old one works with hellybean
Click to expand...
Click to collapse
Great, can you provide a link? Thanks.
JIM
tenantrep said:
Great, can you provide a link? Thanks.
JIM
Click to expand...
Click to collapse
Strike two.
Great, will you please provide a link to FFC CM9 zip? Searched and came up dry. Thanks.
Oh sorry about that, I will post it when I get home. Now the cm doesn't work with the newest Shelly 0828. Only the cm10. So you might want to DL that if your going to the newest helly. I figure all the proceeding helly's also.
I'll still post it though
Oh. I forgot I had it lol
http://www.4shared.com/zip/FU6AqCOR/cm9_ffc_fix_camera_files_v10.html
tenantrep said:
Great, will you please provide a link to FFC CM9 zip? Searched and came up dry. Thanks.
Click to expand...
Click to collapse
It's been linked in the op. How could you not find it lol?
Sent from my SGH-T959 using xda app-developers app
Hey thanks again - my senior moment! As for the double post, I guess there was a lag here at the office and I sincerely apologize for ruffling any feathers. You see I go back to the time of 8086, 80286 etc and sometimes things like OP just do not register. Regardless, really appreciate the assist and the chance to proved that the FFC really DOES work! BTW, I still attend local SIG computer group where the oldest member is 104! He just bought an ASUS tablet and get this demanded a 2-yr warranty! Now that is positive thinking. . . . Take care.
JIM
Thanks bud, works great.
Off topic (Still related):
Unfortunately, my front camera shows as it's sideways, its an old bug, but I was wondering if anyone made any progress with it?
Related
Now some may ask why I would want to do this? Well I watched a few video reviews on the Captivate, and I noticed their camera software was different, the menus were layed out differently, and honestly they are better organized.
You can switch scene modes with a button on the left side instead of drilling down into settings>page 2>scenes
The video recording is much better, it actually records as soon as you press the button instead of having to wait a few seconds before it starts recording. It also stops as soon as you hit stop with no delay or lag like there was on the stock software.
Overall I think it improves an already awesome camera.
Still has all the same camera modes and scene modes as the vibrant, so you won't be losing anything by flashing this
Installation:
Copy zip to internal SD
Reboot into Clockwork MOD recovery
Flash zip
Reboot and Enjoy!
EDIT: Added the Camera-Stock-signed.zip if you want to revert back to the original software
EDIT2: Tested out the Odexed build on a deodexed ROM, wasn't throwing any errors on flash, so I just simplified both zips into 1 zip. So flash away!
Video: http://www.youtube.com/watch?v=8wcCb6tbzY8 (Sorry for the blurry cam will update it shortly)
THANK YOU!
This is really a simple, awesome addition/mod to the phone, should have been the default camera app!
cheers.
Thanks for this! Definitely, quicker and more usable. Everything seems to work as advertised. Good catch!
Anyone have the stock app? I flashed this thinking I'd like it but for some reason I prefer the stock one. I'd greatly appreciate either another flashable ZIP or just the Camera.apk file.
advil0 said:
Anyone have the stock app? I flashed this thinking I'd like it but for some reason I prefer the stock one. I'd greatly appreciate either another flashable ZIP or just the Camera.apk file.
Click to expand...
Click to collapse
Updated the first post, look in the attachments, there's a zip to flash back to the stock Camera app
Are we to flash both zip files or which one? There is an odexed one and a deodexed one.
chaoscentral said:
Updated the first post, look in the attachments, there's a zip to flash back to the stock Camera app
Click to expand...
Click to collapse
Very much appreciated!
kizer said:
Are we to flash both zip files or which one?
Click to expand...
Click to collapse
if you are running a stock rom or other non deodexed rom, flash the odexed one, otherwise if you are running Vibrant4, or anomalous3's rom, flash the deodexed one.
EDIT: When in doubt, flash the Odexed one, if an error comes up during flash, that means you have a deodexed ROM and you should use the other one. If you try the deodexed one first, you will get no errors on install, but you will get force closes when using the camera.
EDIT2: Turns out the Odexed build which looks for 2 files that dont exsist on a deodexed build doesn't throw any errors anyways, so I'm just going to use that as the main update. removed the confusion of having 2 different updates
Thanks for the info. Its been a while since I've gone gungho mod crazy on my phone and I seem to have forgotten all of the lingo.
Thanks for the app and I will give it a try.
Working great. Thanks for this. Was missing the quick setting drawer thingy-ma-bob coming from a MT3GS.
Very cool. Good work
Thanks alot for this! I like it alot!
Seems to work
Ill leave feed back when i test it in the wild
Thanks for your work
Thanks a lot!
For me it was very buggy when I first launched it. Almost seemed to FC, but it kinda just went black.
After I relaunched the app it worked very well.
Thanks for Sharing.
I had messed with a friend's Captivate before I got my Vibrant and wondered why the camera was set up so weird compared to the Captivate.
Awesome mod, thanks OP. Works well on my Vibrant.
Thx for the mod but I really like the vibrant camera better my friend has a captivate and I don't care for his cam but hay everyone is different so thx I don't have any issues with my cam so I'd say if it ain't broke don't fix it. Its cool to see this work on the vibrant though.
Sent from my SGH-T959 using XDA App
AustinKnight45 said:
Thx for the mod but I really like the vibrant camera better my friend has a captivate and I don't care for his cam but hay everyone is different so thx I don't have any issues with my cam so I'd say if it ain't broke don't fix it. Its cool to see this work on the vibrant though.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
i actually don't see why we wouldn't use this over the stock vibrant one. The menu seems more streamlined.
could someone put a video together of the stock vibrant software for comparison?
Berserk87 said:
could someone put a video together of the stock vibrant software for comparison?
Click to expand...
Click to collapse
I'd like to see that too. The video in the OP looks a lot like the camera app in my I9000. What did they do for the Vibrant?
EDIT: as of cm7 0506 nightly, nearly all camera issues are are resolved. read my post on cm forums for details.
hello everybody,
i seem to have a similar problem as kroat999 posted in this thread, as my back camera is showing a lot of red lines/dashes throughout the viewer area.
also, the pictures take look like this, seems like the file was saved before the camera chip finished capturing.
i'm using cm7-nightly from 03/18 and platypus kernel from 03/22 (from the thread mentioned above). this definitely didn't happen with stock firmware 2 days ago, i haven't tried the cam with the default cm7-kernel.
any ideas or suggestions?
btw: viewer image of the ffc looks ok, but is tilted by 90°.
Click to expand...
Click to collapse
Hi kwantenmechaniker,
did this problem with the picture also happen with earlier kernels (from 21st or earlier ?)
the vertical (or horizontal) red lines are a known problem right now
but should only be an aesthetic issue - with the taken picture they're not present anymore
so it's probably an camera overlay or camera driver problem
sorry - I took several pictures and couldn't reproduce your truncated picture
yes, I noticed the 90° (clockwise) rotated picture, too
others get this with bilboa1's kernel also - so it's an upstream problem
you could try one thing:
make a nandroid backup then do a factory reset/wipe and see if that "fixes" it
if not you have a backup to restore
currently I'm out of ideas what might cause this
zacharias.maladroit said:
did this problem with the picture also happen with earlier kernels (from 21st or earlier ?)
Click to expand...
Click to collapse
yes, it was the same with the 03/04 and 03/21 kernel. it's possibly a cm7 problem, but noone else seems to suffer from it...
the vertical (or horizontal) red lines are a known problem right now
but should only be an aesthetic issue - with the taken picture they're not present anymore
Click to expand...
Click to collapse
yes i noticed that. i took a series of 15 shots, 1 was a full pic (without stripes), the rest were truncated, some more, some less.
make a nandroid backup then do a factory reset/wipe and see if that "fixes" it
Click to expand...
Click to collapse
thanks, i'll try this as soon the battery is fully charged again.
the factory reset didn't solve the problem, i guess i'll try a complete system/data/cache reformat and install the complete platypus-cm7-package.
i'll check back in the evening when i have the time to do this.
btw: i had 2 random reboots with this kernel so far, one during a phone call, the other one while using xda-app.
Make that 3 reboots. Just had one while starting the browser.
Sent from my GT-I9000 using XDA App
kwantenmechaniker said:
the factory reset didn't solve the problem, i guess i'll try a complete system/data/cache reformat and install the complete platypus-cm7-package.
i'll check back in the evening when i have the time to do this.
btw: i had 2 random reboots with this kernel so far, one during a phone call, the other one while using xda-app.
Click to expand...
Click to collapse
kwantenmechaniker said:
Make that 3 reboots. Just had one while starting the browser.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
sorry for any inconvenience caused:
I just removed the offending unstable kernels & update packages from the list
please install initial + the nightly update directly from Sourceforge
afterwards you can install the kernel from 03/24/2011
that should be stable
thanks !
please install initial + the nightly update directly from Sourceforge
afterwards you can install the kernel from 03/24/2011
Click to expand...
Click to collapse
I skipped the 'install initial' part, is it important? Running 03/25 Kernel as of now, gonna report back tomorrow after some testing.
Sent from my GT-I9000 using XDA App
after updating to each cm nightly that was available in the meantime, including a full system/data/cache/dalvik format & initial reinstall, the camera problem still persists (running 05/01 version with stock kernel by now).
gonna post it on cm forum, maybe someone there knows how to fix this.
kwantenmechaniker said:
after updating to each cm nightly that was available in the meantime, including a full system/data/cache/dalvik format & initial reinstall, the camera problem still persists (running 05/01 version with stock kernel by now).
gonna post it on cm forum, maybe someone there knows how to fix this.
Click to expand...
Click to collapse
they're aware of it and working on it
4 more posts and afaik you should be allowed to post in the dev section
they're aware of it and working on it
Click to expand...
Click to collapse
good to know but i still posted a new thread there
4 more posts and afaik you should be allowed to post in the dev section
Click to expand...
Click to collapse
3 more
as of cm7 0506 nightly, nearly all camera issues are are resolved. kudos to the cm7 devs, you guys rock
[Old Now Froyo Only!]
Hi all,
Update 30/03: Testing seems okay so flashable zip file for recovery added.
There seems to be a lot of demand for a silent video camera and I sometimes wonder if the motives are questionable but nevertheless, I aim to please.
LG have put security around the video camera sound files (these are in camera.apk/res/raw/ - camstart01.wav and camstop01.wav). They verify the file by name, id and most significantly a hash key. This means it is impossible to change the files without changing the code.
So here we have the modified Camera.apk with code changes.
No video camera start sound
No video camera end sound
Still camera sounds not affected
Sound file verification and sound trigger code removed, no code added
Download the .zip file below and flash it from ClockworkMod Recovery.
Download: O2xNoVideoSound-unsigned.zip
Please report back and I like the 'Thanks' button below...
It seems to work like it should, no beep when starting/stopping recording!
Thank you very much
works great thanks!
Thanks! It works without problem!
Won't get it to work with my 2X
Sorry, im new at this...Why won't it install? Im opening it through Superbox/file manager to install it, but it won't work...help plz
Ekkis said:
Sorry, im new at this...Why won't it install? Im opening it through Superbox/file manager to install it, but it won't work...help plz
Click to expand...
Click to collapse
It dont work that way, you must adb push it
Sent from my Nexus S using Tapatalk
I tried adb push camera.apk system/app
but it says "read only file system". what's wrong?
tablighs said:
I tried adb push camera.apk system/app
but it says "read only file system". what's wrong?
Click to expand...
Click to collapse
I've just added an update.zip to the first post, you can use this to flash it from recovery.
Works nicely, thanks
Sent from my LG-P990 using XDA App
Super cool only sound that irritates me is the sound when you take a screenshot
jaapschaap said:
Super cool only sound that irritates me is the sound when you take a screenshot
Click to expand...
Click to collapse
Should be possible, I'll have a look.
"I sometimes wonder if the motives are questionable but nevertheless, I aim to please."
Thank you sooo much, my 8month old son almost always instantly stopped what i wanted to record because of this F*cking camera sound. Never seen an stupid idea like this, damnd LG.
Thanks alot for fixing this _BUG_.
h0rst said:
"I sometimes wonder if the motives are questionable but nevertheless, I aim to please."
Thank you sooo much, my 8month old son almost always instantly stopped what i wanted to record because of this F*cking camera sound. Never seen an stupid idea like this, damnd LG.
Thanks alot for fixing this _BUG_.
Click to expand...
Click to collapse
I tried flashing this through CWM and it ended up getting stuck in a boot loop. Had to restore my backup to get it to boot again. I'm running stock Android 2.2.2, Kernal 2.6.32.9, Build FRG83G and LGE version LGP990-V10d.
Any ideas why it's not working?
Seilen said:
I tried flashing this through CWM and it ended up getting stuck in a boot loop. Had to restore my backup to get it to boot again. I'm running stock Android 2.2.2, Kernal 2.6.32.9, Build FRG83G and LGE version LGP990-V10d.
Any ideas why it's not working?
Click to expand...
Click to collapse
No, I don't know why sorry. It should work, it simply replaces one file.
In fact I can't imagine what could even cause the loop. To be honest I'd need to see a log to confirm what the problem was.
If you can get a log with adb whilst it's looping I'd take a look for you but of course this is effort you may not care to go to.
Thanks for the reply and offer, but yea that is a bit more effort than I think the silent video is worth at the moment. Hopefully nobody else is having issues.
Seilen said:
Thanks for the reply and offer, but yea that is a bit more effort than I think the silent video is worth at the moment. Hopefully nobody else is having issues.
Click to expand...
Click to collapse
Thought so!
And it seems like a rare occurrence thankfully.
Here is modded stock camera in su660 (aka optimus 2x in korea).
I couldn't test this with p990, but it will operate on your p990, maybe.
Please test this and reply.
Includes.
1. silent video start/end sound.
2. silent shutter sound. (select at setting/Shutter sound/tone 4)
3. silent AF sound.
4. supports only two languages. (Eng,Kor)
5. " only froyo stock rom or mcr."
Install.
1. Needs to root.
2. Rename system/app/Camera.apk to Camera.ap (Don't delete for undoing).
3. Must to reboot.
4. Just install this.
5. And reply plz.
kitty's_daddy said:
Here is modded stock camera in su660 (aka optimus 2x in korea).
I couldn't test this with p990, but it will operate on your p990, maybe.
Please test this and reply.
Install.
Click to expand...
Click to collapse
FC on start on Topogigi's 1.3 (German) GB, unfortunately. But thanks for sharing!
M.
Sent from my LG-P990 using xda premium
morckx said:
FC on start on Topogigi's 1.3 (German) GB, unfortunately. But thanks for sharing!
M.
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
Thanks. what is FC?
kitty's_daddy said:
Thanks. what is FC?
Click to expand...
Click to collapse
Force-Close, ie. a crash.
This is 4.2 Camera app. I have tested it working on Stock, Rooted, Deodexed 4.1.2. AND CM-10.0.0
All features in the camera app are working for me. This will also change your gallery to the updated version as well (because it is packaged together).
To install:
YOU WILL NEED APPROX 10M FREE IN YOUR SYSTEM PARTITION!!!
1) Check the amount of space available in your system partition. You can just go to /system with root explorer and look in the upper left for available space.
2) If you do not have enough space you can flash Slim LatinIME, reboot and check your available space.
*This will remove all languages from the keyboard except english. So if you need another language do not use this.*
3) If you have enough space then flash only 4.2 Camera for Xoom (make a nandroid first if you like)
THIS IS WORKING ON:
STOCK 4.1.2.
CM-10.0.0.
IF IT DOES NOT WORK ON YOUR ROM PLEASE INCLUDE A LOGCAT IN YOUR POST. THX.
Credit to dmmarck for the files
I only had to mod the script and include the right files for this to work on the Xoom.
DOWNLOAD
4.2 Camera for Xoom
Slim LatinIME
flashed this on eos 155 and it deleted my camera/gallery
Nothing changed on CM10. No photosphere
Sent from my MZ601 using xda premium
Please could someone with EOS 155 try to flash this zip? and let us know the results?
Does it work fine or not?
alex94kumar said:
flashed this on eos 155 and it deleted my camera/gallery
Click to expand...
Click to collapse
check to make sure the permissions got set correctly for GoogleGallery.apk (rw-r-r) if they didnt just change it with root explorer, a reboot may be needed.
also, the script does not delete the original gallery, so if it dont work on eos than just delete GoogleGallery.apk from system/app and you should be fine.
assuming im able to get it to work, does this version have a functioning photosphere?
Same here.No photosphere on cm10.
in theory it should work, we have a gyroscope/accelerometer in our xooms
work on cm10 20121029 nigtlies ,
only editor contrast crash
using eos 155 photosphere is not working here too
thenemis said:
work on cm10 20121029 nigtlies ,
only editor contrast crash
Click to expand...
Click to collapse
gax said:
Same here.No photosphere on cm10.
Click to expand...
Click to collapse
ahmed007 said:
using eos 155 photosphere is not working here too
Click to expand...
Click to collapse
if any of you could provide a logcat I can see what may be stopping it from working for you.
jase33 said:
This is the leaked 4.2 Camera app. I have tested it working on Stock, Rooted, Deodexed 4.1.2.
All features in the camera app are working for me. This will also change your gallery to the updated version as well (because it is packaged together).
To install just flash the zip in recovery (make a nandroid first if you like)
Credit to dmmarck for the files
I only had to mod the script and include the right files for this to work on the Xoom.
DOWNLOAD
4.2 Camera for Xoom
Click to expand...
Click to collapse
The app did not work for me, it just uninstalled my present camera and nothing more. I'll just wait on team eos.
Flashing these 4.2 gapps
http://d-h.st/K47
taken from here
http://forum.xda-developers.com/showthread.php?t=1965895
4.2 camera installed correctly but Gallery FC on photosphere selection
View attachment logcat_and_device_info.zip
heres a logcat, i hope it includes the necessary information. this is when the panorama mode force closes the app with no warning
Working on Wingray
Team EOS 3 stable.
Just flashed it from recovery and rebooted.
Its quite funky, thanks.
edit: The "apply tiny planet" function does not work. The app just bins to launcher. Still cool though.
Whats an easy way to get hold of my logcat. Where does it live?
alex94kumar said:
View attachment 1459202
heres a logcat, i hope it includes the necessary information. this is when the panorama mode force closes the app with no warning
Click to expand...
Click to collapse
Thanks. I will look at it tomorrow.
jase33 said:
Thanks. I will look at it tomorrow.
Click to expand...
Click to collapse
Sweet. Just don't open it in notepad, otherwise it's almost incomprehensible lol
alex94kumar said:
Sweet. Just don't open it in notepad, otherwise it's almost incomprehensible lol
Click to expand...
Click to collapse
sorry took so long but I just PM'd you a possible fix. let me know if it works. THX
It didnt
alex94kumar said:
It didnt
Click to expand...
Click to collapse
OK. I PM'd you another link to a new "fix". let me know if it that solves it.
BUGS
Wired headset/headphone is not working.
CM Bugs - Boot Animation disappears.
Torch - Hangs/Causes FC
Camera - Freezes after a snapshot. (Possible Fix)
Click to expand...
Click to collapse
DOWNLOAD
v3.8.2
This is a completely different port and all previous fixes will be invalid. And you will have to erase data and cache and dalvik-cache completely!
Do a factory wipe.
Flash this ROM.
ROM
Boot into the ROM.
Then, reboot into recovery and flash Gapps.
GApps
Boot into the ROM. Setup your Google Account.
Reboot into the recovery and flash this fix.
Fix-2 for 3.8.2
Click to expand...
Click to collapse
SCREENSHOTS will come soon.
For now, please flash this and provide us with some feedback. Let's get this thing up and running. :highfive: :laugh:
CREDITS
@fareeed
@Taylor_Swift
@Everyone who worked on getting MIUI running
Click to expand...
Click to collapse
Omar! This is for you lol :good:
I shall take this.
And this last one.
so, sd card doesn't work with this? sorry for being overzealous.. just itching for MIUI...
alnikki25k said:
Omar! This is for you lol :good:
Click to expand...
Click to collapse
Thanks bro. I'll be posting fixes and also Sony based builds too
Sent from my C6603 using xda premium
theminigame said:
so, sd card doesn't work with this? sorry for being overzealous.. just itching for MIUI...
Click to expand...
Click to collapse
Yup. This was ported from the One. So expected to not work. But shouldn't be difficult to fix that.
Thanks a lot for what all of you did to getting MIUI on the Xperia Z !
I will be following this thread to give you feedback.
On the other thread, i mentioned my data network didn't work, forget that. I check my access point and it work perfectly now.
But i was really surprised when i wanted to go to my clockworkmod and i saw a "Teamwin mod"-thing... It's not very kind to do some thing we didn't want...
Somebody have a *.zip to get back my old clockworkmod ? Thanks
The MIUI V5 Rom work very well. Unfortunately, there is the SD Card problem who cause a lot of ForceClose. But i'm sure you will get it work.
Keep the good work guys !
PS: Sorry for my bad english speaking, i'm french.
EmryX said:
On the other thread, i mentioned my data network didn't work, forget that. I check my access point and it work perfectly now.
But i was really surprised when i wanted to go to my clockworkmod and i saw a "Teamwin mod"-thing... It's not very kind to do some thing we didn't want...
Somebody have a *.zip to get back my old clockworkmod ? Thanks
Click to expand...
Click to collapse
The recovery is built into the kernel. If you want me to post CWM, I shall post another boot.img. However, I do suggest you to try TWRP. It's much faster and easier.
The recovery is built into the kernel
Click to expand...
Click to collapse
Oh, i didn't know that. Sorry
I don't want to bother you with this. But if you could teach me how i can put my recovery on your build, i will be happy
And keep Mega.Co for the build upload, it's awesome and fast !
Fix-1 By lzyllp.
Fix google pinyin input FC
remove unused settings option from One
add customize screen key positions
fix wrong storage list in framework-res but storage still not work now
http://www.mediafire.com/download/0q3vn350kq0v3mh/Fix-1.zip
for google aosp input FC.
U only need take the lib from input apk and put it into system lib
Some screenshots
Perfect !!!miui are the best rom ever!!!!
alnikki25k said:
Yup. This was ported from the One. So expected to not work. But shouldn't be difficult to fix that.
Click to expand...
Click to collapse
I'm guessing some changes in vold.fstab
Sent from my C6602 using Tapatalk 4 Beta
Crashes in Permission manager, so I can't get root.
[email protected] said:
Crashes in Permission manager, so I can't get root.
Click to expand...
Click to collapse
SuperSU. Just got Settings/About to work as well
Sent from my C6603 using xda premium
Sorry @alnikki25k for a bit of a thread steal (its OK we're a team). You know this means. Sense 5.0 from the One is possible. Forget our Droid DNA port cause that ruined my phone (Sony are replacing it). I'll talk later on Hangouts in more depth cause I had a Sense 5.0 ROM that booted (stuck on the boot screen just like the original versions of yours and my MIUI builds, However Android being Android, ADB won't work...)
Let me know what you think
Sent from my C6603 using xda premium
Alhaddad said:
I'm guessing some changes in vold.fstab
Sent from my C6602 using Tapatalk 4 Beta
Click to expand...
Click to collapse
The storage maybe the services.jar problem.
In services.jar.out\smali\com\android\server the all filename start with MountService
I think we need patch some code from yuga
this services mount the usb storage
Taylor_Swift said:
Sorry @alnikki25k for a bit of a thread steal (its OK we're a team). You know this means. Sense 5.0 from the One is possible. Forget our Droid DNA port cause that ruined my phone (Sony are replacing it). I'll talk later on Hangouts in more depth cause I had a Sense 5.0 ROM that booted (stuck on the boot screen just like the original versions of yours and my MIUI builds, However Android being Android, ADB won't work...)
Let me know what you think
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
I was actually thinking about this as well. If we could get Sense 5 to work somehow, it would be fantastic! And go ahead and steal lol. I am working on mounting the storage now.