[Q] Back Camera is showing red lines and doesn't take pitures - Galaxy S I9000 Q&A, Help & Troubleshooting

EDIT: as of cm7 0506 nightly, nearly all camera issues are are resolved. read my post on cm forums for details.
hello everybody,
i seem to have a similar problem as kroat999 posted in this thread, as my back camera is showing a lot of red lines/dashes throughout the viewer area.
also, the pictures take look like this, seems like the file was saved before the camera chip finished capturing.
i'm using cm7-nightly from 03/18 and platypus kernel from 03/22 (from the thread mentioned above). this definitely didn't happen with stock firmware 2 days ago, i haven't tried the cam with the default cm7-kernel.
any ideas or suggestions?
btw: viewer image of the ffc looks ok, but is tilted by 90°.
Click to expand...
Click to collapse

Hi kwantenmechaniker,
did this problem with the picture also happen with earlier kernels (from 21st or earlier ?)
the vertical (or horizontal) red lines are a known problem right now
but should only be an aesthetic issue - with the taken picture they're not present anymore
so it's probably an camera overlay or camera driver problem
sorry - I took several pictures and couldn't reproduce your truncated picture
yes, I noticed the 90° (clockwise) rotated picture, too
others get this with bilboa1's kernel also - so it's an upstream problem
you could try one thing:
make a nandroid backup then do a factory reset/wipe and see if that "fixes" it
if not you have a backup to restore
currently I'm out of ideas what might cause this

zacharias.maladroit said:
did this problem with the picture also happen with earlier kernels (from 21st or earlier ?)
Click to expand...
Click to collapse
yes, it was the same with the 03/04 and 03/21 kernel. it's possibly a cm7 problem, but noone else seems to suffer from it...
the vertical (or horizontal) red lines are a known problem right now
but should only be an aesthetic issue - with the taken picture they're not present anymore
Click to expand...
Click to collapse
yes i noticed that. i took a series of 15 shots, 1 was a full pic (without stripes), the rest were truncated, some more, some less.
make a nandroid backup then do a factory reset/wipe and see if that "fixes" it
Click to expand...
Click to collapse
thanks, i'll try this as soon the battery is fully charged again.

the factory reset didn't solve the problem, i guess i'll try a complete system/data/cache reformat and install the complete platypus-cm7-package.
i'll check back in the evening when i have the time to do this.
btw: i had 2 random reboots with this kernel so far, one during a phone call, the other one while using xda-app.

Make that 3 reboots. Just had one while starting the browser.
Sent from my GT-I9000 using XDA App

kwantenmechaniker said:
the factory reset didn't solve the problem, i guess i'll try a complete system/data/cache reformat and install the complete platypus-cm7-package.
i'll check back in the evening when i have the time to do this.
btw: i had 2 random reboots with this kernel so far, one during a phone call, the other one while using xda-app.
Click to expand...
Click to collapse
kwantenmechaniker said:
Make that 3 reboots. Just had one while starting the browser.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
sorry for any inconvenience caused:
I just removed the offending unstable kernels & update packages from the list
please install initial + the nightly update directly from Sourceforge
afterwards you can install the kernel from 03/24/2011
that should be stable
thanks !

please install initial + the nightly update directly from Sourceforge
afterwards you can install the kernel from 03/24/2011
Click to expand...
Click to collapse
I skipped the 'install initial' part, is it important? Running 03/25 Kernel as of now, gonna report back tomorrow after some testing.
Sent from my GT-I9000 using XDA App

after updating to each cm nightly that was available in the meantime, including a full system/data/cache/dalvik format & initial reinstall, the camera problem still persists (running 05/01 version with stock kernel by now).
gonna post it on cm forum, maybe someone there knows how to fix this.

kwantenmechaniker said:
after updating to each cm nightly that was available in the meantime, including a full system/data/cache/dalvik format & initial reinstall, the camera problem still persists (running 05/01 version with stock kernel by now).
gonna post it on cm forum, maybe someone there knows how to fix this.
Click to expand...
Click to collapse
they're aware of it and working on it
4 more posts and afaik you should be allowed to post in the dev section

they're aware of it and working on it
Click to expand...
Click to collapse
good to know but i still posted a new thread there
4 more posts and afaik you should be allowed to post in the dev section
Click to expand...
Click to collapse
3 more

as of cm7 0506 nightly, nearly all camera issues are are resolved. kudos to the cm7 devs, you guys rock

Related

ClockWork Recovery5.0

CWR5.0 is the newest and Boi I would luv a Theme as Vibrant as that..It resembles Cyan but w/a splash of Neon sprinkled on it..Given it a Metallic Blue look..Absolutely Beautiful..Has anyone seen it yet?I wish a Good Themer can make a theme like that that's universal to Froyo, GB and CM7
How did you get the updated version? I update through ROM Manager and it says I have the most current version.
i like the new neon cyan color.
be cautious with the new update some are having issues with backup and restore. It is supposedly not restoring everything. Some had to do a factory reset
GMoGoody said:
be cautious with the new update some are having issues with backup and restore. It is supposedly not restoring everything. Some had to do a factory reset
Click to expand...
Click to collapse
where are you reading this?
GMoGoody said:
be cautious with the new update some are having issues with backup and restore. It is supposedly not restoring everything. Some had to do a factory reset
Click to expand...
Click to collapse
I had an issue where unable to restore a rom b/c it couldn't read the script -- updated rom manager on the market and have used both cwr and rom manager without issue.
yeah i did some reading up, i wouldn't recommend using this update. i just reverted back to an older version that worked.
fixxxer2008 said:
where are you reading this?
Click to expand...
Click to collapse
Over on MikMik
http://themikmik.com/showthread.php?8382-New-Clockwork-recovery-5.0.01
I'm scared of it. I can deal with anything breaking with roms or themes, but not my back up's.
Sent from the Bolt via Tapatalk
sreddos said:
How did you get the updated version? I update through ROM Manager and it says I have the most current version.
Click to expand...
Click to collapse
Never mind this. I had a retard moment and then realized that I do have the 5.0 version. Duhhh
I saw some posted on the MikMik that they were having issues with the camera after updating CW...
I am also having issues, where the camera app will not open on the 5.0.0.8 update of CW...I see there is a newer version 5.0.0.9 -- I 'll update and check back.
There is now a new version to 5.0.1.0
Kroaker said:
There is now a new version to 5.0.1.0
Click to expand...
Click to collapse
Anybody report any other issues with this version?
im not updating until this weekend. i want to make sure there is no bugs.
fixxxer2008 said:
im not updating until this weekend. i want to make sure there is no bugs.
Click to expand...
Click to collapse
Yea, avoid it...unfortunately --- uped to 5.0.1.0 and it fixed the camera but now I can't load zips from Rom manager...prolly need to wait on an update for that too...lol
ThunderRootedDragon said:
I saw some posted on the MikMik that they were having issues with the camera after updating CW...
I am also having issues, where the camera app will not open on the 5.0.0.8 update of CW...I see there is a newer version 5.0.0.9 -- I 'll update and check back.
Click to expand...
Click to collapse
CWM did not cause the Camera Google talk issues. It seems to be data and time related as some TBs are having the issue occur at different times of the day depending on their time zone.
There are two fixes for that posted here it appears to be an outdated libOlaEngine.so
http://rootzwiki.com/showthread.php?4280-FIX-Camera-amp-Google-Talk
GMoGoody said:
CWM did not cause the Camera Google talk issues. It seems to be data and time related as some TBs are having the issue occur at different times of the day depending on their time zone.
There are two fixes for that posted here it appears to be an outdated libOlaEngine.so
http://rootzwiki.com/showthread.php?4280-FIX-Camera-amp-Google-Talk
Click to expand...
Click to collapse
Yea...thanks! Did some searching and downloaded the zip...seems to be working pretty well right now...but I still can't download zips on Rom manager and it won't let me install an older recovery....for now I'm installing zips manually
I flashed cwm5.0.1.0 via hboot. Downloaded from Absolute _Zero's thread in developer section. Working fine for me.
Flashed my update using rom manager.
It still has some bugs. I couldn't restore any of my backups.

[MOD] FFC for Vibrant - CyanogenMod 10

Samsung Vibrant Front Facing Camera Modification
for CyanogenMod 10
​
For people with the FFC mod on the Vibrant, this is a CWM flashable ZIP that will work with the latest CM10 nightlies to enable FFC support.
Requirements
Samsung Vibrant, Model SGH-T959
Front Facing Camera hardware modification: Replace the internal phone camera with a i9000 camera
An AOSP JB ROM post-data/system partition swap (details about how to tell below)
Instructions
Copy file to SD card
Reboot into recovery
(Optional) Flash the ROM zip if you are upgrading to a newer ROM
Flash this ZIP
Reboot
Open up camera app. If it worked you will have a button just above the zoom slider to switch between front and rear cameras.
Compatible ROMs
- CyanogenMod 10 Nightly Builds 20120927 and later
- Helly Bean ??? and after
Non-Compatible ROMs
These ROMs do not work with this zip. If you are using any of these you may try using the CM9 files available here.
- CyanogenMod 10 20120926 or earlier
- Helly Bean ??? or earlier
If you have tested a ROM and would like to add it to the list please reply below!
How do I know if my ROM has the system/data partitions swapped?
Open up a shell, through ADB, Terminal Emulator, Connectbot, etc. Type the command
Code:
mount
and hit enter. Look for the line that mentions /system (it's a lot of jumble, I know! It's in there.) If you have the swap (and therefore are able to use this zip, you should see a line that look like this:
Code:
/dev/block/mmcblk0p2 /system ext4 rw,nodev,noatime, . . . . .
If you do not see mmcblk0p2 next to /system this mod is not for you! The non-compatible ROMs will say mtdblock2 next to system.
is this different from the cm9 ffc fix files or the same?
mryounghc said:
is this different from the cm9 ffc fix files or the same?
Click to expand...
Click to collapse
Different. If you try the CM9 FFC files you're gonna have a bad time.
OK reason I asked is because I have always used the cm9 without a problem on jb. Well, I never actually USED it in months but I am able to switch back and forth. I'll try this one out though
mryounghc said:
OK reason I asked is because I have always used the cm9 without a problem on jb. Well, I never actually USED it in months but I am able to switch back and forth. I'll try this one out though
Click to expand...
Click to collapse
The old one would likely have worked on CM10 up until recently, since any changes to camera were pretty minor between ICS and JB. However, with the recent system/data partition switcheroo the old zip could potentially screw things up.
chui101 said:
For people with the FFC mod on the Vibrant, here is a CWM flashable ZIP that will work with the latest CM10 nightlies to enable FFC support.
Just copy this file to the SD card and flash this after the nightly.
Enjoy!
Click to expand...
Click to collapse
Will this work with SlimBean 2.1 ?
UPDATE : It works!
I can confirm that the CM9 fix no longer works with CM10. I don't know that it caused issues after flashing but it didn't work. Hadn't put the time in to figure it out but thanks to chui101 I don't have to!
FFC
chui101 said:
For people with the FFC mod on the Vibrant, here is a CWM flashable ZIP that will work with the latest CM10 nightlies to enable FFC support.
Just copy this file to the SD card and flash this after the nightly.
Enjoy!
Click to expand...
Click to collapse
Unfortunately it did not work with the Helly Bean 817 version of CM10. Can someone send a couple of screenshots of the what the camera screen is supposed to look like? I have a compass-like icon in the upper left corner, but when I tap it - I just get a focus setting at that point. Never have fired up the FFC and don't know if it was DOA or not. Thanks.
JIM in FLA
tenantrep said:
Unfortunately it did not work with the Helly Bean 817 version of CM10. Can someone send a couple of screenshots of the what the camera screen is supposed to look like? I have a compass-like icon in the upper left corner, but when I tap it - I just get a focus setting at that point. Never have fired up the FFC and don't know if it was DOA or not. Thanks.
JIM in FLA
Click to expand...
Click to collapse
It will ONLY work with CM10. Helly bean does not have the new partition layout - You can probably use the CM9 zip with that.
the old one works with hellybean
mryounghc said:
the old one works with hellybean
Click to expand...
Click to collapse
Thanks for letting me know. I've updated the OP to be more informative!
chui101 said:
It will ONLY work with CM10. Helly bean does not have the new partition layout - You can probably use the CM9 zip with that.
Click to expand...
Click to collapse
OK great, can you provide a link? Thanks.
tenantrep said:
OK great, can you provide a link? Thanks.
Click to expand...
Click to collapse
I took the time to type out a detailed OP, if you can't read it, then no I won't provide you a link.
mryounghc said:
the old one works with hellybean
Click to expand...
Click to collapse
Great, can you provide a link? Thanks.
JIM
tenantrep said:
Great, can you provide a link? Thanks.
JIM
Click to expand...
Click to collapse
Strike two.
Great, will you please provide a link to FFC CM9 zip? Searched and came up dry. Thanks.
Oh sorry about that, I will post it when I get home. Now the cm doesn't work with the newest Shelly 0828. Only the cm10. So you might want to DL that if your going to the newest helly. I figure all the proceeding helly's also.
I'll still post it though
Oh. I forgot I had it lol
http://www.4shared.com/zip/FU6AqCOR/cm9_ffc_fix_camera_files_v10.html
tenantrep said:
Great, will you please provide a link to FFC CM9 zip? Searched and came up dry. Thanks.
Click to expand...
Click to collapse
It's been linked in the op. How could you not find it lol?
Sent from my SGH-T959 using xda app-developers app
Hey thanks again - my senior moment! As for the double post, I guess there was a lag here at the office and I sincerely apologize for ruffling any feathers. You see I go back to the time of 8086, 80286 etc and sometimes things like OP just do not register. Regardless, really appreciate the assist and the chance to proved that the FFC really DOES work! BTW, I still attend local SIG computer group where the oldest member is 104! He just bought an ASUS tablet and get this demanded a 2-yr warranty! Now that is positive thinking. . . . Take care.
JIM
Thanks bud, works great.
Off topic (Still related):
Unfortunately, my front camera shows as it's sideways, its an old bug, but I was wondering if anyone made any progress with it?

[Official] LANIGHT for Captivate Q&A

I decided to create a new thread solely for Q/A and for people who are exeriencing issues running LANIGHT. Many issues can be solved by flashing different kernel/patch/fix/modem or going back to stock.
Try flashing DarkyRom RE: http://www.darkyrom.com/index.php?th...aptivate.6062/ (Captivate guide)
Then flash JB on it with proper instructions.
When an application crashes I get the option to close it or report the crash. When I click to report the crash it then says that the Play Store crashed. Is there a fix for this?
Still have ringtone issue
I installed 6.5 dd and all went well, but I still have the disappearing ringtone issue. Tried the fix and didn't work. I came from 4.2 dd. Any comments on how to try to fix this? This ROM is great.
Flip_RX said:
I installed 6.5 dd and all went well, but I still have the disappearing ringtone issue. Tried the fix and didn't work. I came from 4.2 dd. Any comments on how to try to fix this? This ROM is great.
Click to expand...
Click to collapse
Did you try flashing semaphore or flashing the rom with a complete wipe? People reported flashing the different kernel sometimes fixes it... Not sure if it's kernel related which is highly unlikely.
I ran the rom with no issues. I remember it was an issues back in 4.2DD but it was gone when i applied the fix... Not everyone that flashed reported that issue maybe that's why i never got serious about it.
Lockscreen wallpaper image?
is there a way to set a different wallpaper image to the lockscreen?
I can't seem to find this option in the Lanigh 6.5 rom.
Flip_RX said:
I installed 6.5 dd and all went well, but I still have the disappearing ringtone issue. Tried the fix and didn't work. I came from 4.2 dd. Any comments on how to try to fix this? This ROM is great.
Click to expand...
Click to collapse
Same here, but I have to confess that I made a dirty flash wiping dalvik cache only. I'll try to make a full wipe to see what happens.
AceofSpades90 said:
Did you try flashing semaphore or flashing the rom with a complete wipe? People reported flashing the different kernel sometimes fixes it... Not sure if it's kernel related which is highly unlikely.
I ran the rom with no issues. I remember it was an issues back in 4.2DD but it was gone when i applied the fix... Not everyone that flashed reported that issue maybe that's why i never got serious about it.
Click to expand...
Click to collapse
I followed instructions from the OP, full wipe 3 times...format individual system/data/datadata/cache/dalvik. Haven't tried semaphore, I like devil ever since team nyx's 4.0.3. With this ROM I have never had wifi issues, since v1. Besides the disappearing ringtones, gallery pictures also disappear just leaving online pics...no FC though. I use quikpic so no biggie.
Telpesoron said:
Same here, but I have to confess that I made a dirty flash wiping dalvik cache only. I'll try to make a full wipe to see what happens.
Click to expand...
Click to collapse
No luck. Actually it it's worse, since before flashing I had access to standard ringtones, those that come with the ROM, but not those which I created by myself. After flashing, all ringtones disappeared. Tried with the ringtones patch, but also no luck.
Next step, it's to find semaphore and flash new kernel. Any clue where I can download it?
Another repeating issue that occurs to me is the FC in the messages app.
EDIT: I've foud Semaphore and flashed it with Odin. I couldn't check if it solved the ringtone issue, since after apply this kernel, I had two severe issues: my screen rotated 90° to the right and the external-sd was not recognized. I've cleared cache, dalvik, fixed permissions and no luck.
Going back to 4.2 by now.
Sent from my SGH-I897 using xda app-developers app
Quick question how do i disable the led notifications, cant seem to find the setting (im probably blind )
BradleyR2010 said:
Quick question how do i disable the led notifications, cant seem to find the setting (im probably blind )
Click to expand...
Click to collapse
In devil kernel manager, go to misc tab (last 1 to the right) > scroll to the bottom, it's there.
BradleyR2010 said:
Quick question how do i disable the led notifications, cant seem to find the setting (im probably blind )
Click to expand...
Click to collapse
Uncheck "Backlight Notification" in the "Misc" tab if using Devil Kernel Config app. :thumbup:
Sent from my SGH-I897 using XDA
Loving the ROM so far. Finally decided that I don't need most of the customization options offered by other JB roms. however, I do miss the battery percentage. Any way to enable that, maybe through a theme or app?
EDIT: sneaky ba$terds, hiding it in the display options.... Looks awesome now. Found a new fav daily driver!
I installed new devil kernes 1.7.4VC and did not loose sound as others are posting. I wiped cache / dalvik & reboot recovery.
P.S. version 1.7.5 fixes the sound accourding the kernel thread.
Flip_RX said:
I installed new devil kernes 1.7.4VC and did not loose sound as others are posting. I wiped cache / dalvik & reboot recovery.
P.S. version 1.7.5 fixes the sound accourding the kernel thread.
Click to expand...
Click to collapse
I can confirm, 1.7.5 VC up and running beautifully. No sound issues whatsover. :thumbup:
Sent from my SGH-I897 using XDA
Lockscreen Custom Image .?.
ronkoni said:
is there a way to set a different wallpaper image to the lockscreen?
I can't seem to find this option in the Lanigh 6.5 rom.
Click to expand...
Click to collapse
I think this must be a common issue, I fixed this by plugging into my pc and safely removing the sd card. but next day same thing .?. I tried to apply a different lockscreen image and it wouldnt load images in gallery .?.
-btw, Love this Rom :highfive: ! It Is Fast. :Thanx Yo: :good:
In a week ive took a Captivate i897 from stock froyo 2.2 to cwmR to Devil kernel 1.6.1 <- which I really like. I first installed CM10 and was satisfied but got to reading around and flashed LAnight 6.5 DD last night (the proper way explained on thread). only played with it for a few hours and loved its speed. But today ran into problem with changing lock screen background image to custom image.
** is there a permanent fix for this, i dont always have my pc with me.
--Also noticed in both CM10 and LAnight 6.5DD, I can only turn on Bluetooth, is there a way to configure it like settings menu in stock froyo .?.
*edit, figured it out, long press WiFi or Bluetooth opens sub menu for settings, DuH. Im a Android Newb.
BradleyR2010 said:
Quick question how do i disable the led notifications, cant seem to find the setting (im probably blind )
Click to expand...
Click to collapse
You don't need to download Devil kernel manager if you don't want to. It's somewhere in the settings (different Lanight versions have it hidden in different places...).
Probably, under settings -> developer options
Or settings -> extras
Or settings -> tvout
Or there's a galaxy s app...
Maybe there are more places I hid it in different versions lol I had to move things and its as unorganized as my rom thread :/
ronkoni said:
is there a way to set a different wallpaper image to the lockscreen?
I can't seem to find this option in the Lanigh 6.5 rom.
Click to expand...
Click to collapse
I remember putting an option in 5.2 for that... Not sure where but it should be in 6.5?
A lot of custom things are hidden so you may have to find them...
BradleyR2010 said:
Quick question how do i disable the led notifications, cant seem to find the setting (im probably blind )
Click to expand...
Click to collapse
In 6.5 its under Settings/TV Out :thumbup:
Sent from my SGH-I897 using XDA
AceofSpades90 said:
I remember putting an option in 5.2 for that... Not sure where but it should be in 6.5?
A lot of custom things are hidden so you may have to find them...
Click to expand...
Click to collapse
I have searched every menu option under settings that i saw. i still cant find a way to set the lock screen image. could someone please point me in the right direction?
feature request
Hi
I know that is Q&A section
However I did not find feature request section
You ROM is naturally briliant! Thanks!
However could you please include Russian T9 letters in dialer in future releases?
Thank you very much in advance
Vladimir
Very weird problem when on lanlight (or any JB rom)
I installed V6.5DD using the exact method you wrote on the OP. I was coming from CM9, it booted up correctly and everything works great except three things: 1) i have no lock screen (it is checked) 2) I don't get any notifications, whatsoever(i can pull it down, but i hear an email or sms come in and nothing appears) 3) when i hold the home button the recent apps don't show.
I formatted everything again and re flashed, same exact problem.
What should i do? everything worked well on cm9
please help if you can.
I installed different JB roms and none worked.
I decided to go back to CM9, and guess what? none of those thing i outlined works.
It looks i have to odin back to stock. Can anyone please help me
sincerely,
Thatguy

[rom share][KK] Liquid Kitkat for Atrix HD MB886

I found this rom on line and I took no credit to this rom. All right belong to its developers and flash at your own risk.
You could find the link here.
Update: new links here:
http://liquidsmooth.net/?page_id=12
Go to " LiquidSmooth KK 3.0 - NIGHTLY", then select "Moto_msm8960dt"
Following is old link
http://www.drdevs.com/devs/?dir=teamliquid/official/Test
Note: I am just an user for the rom and know nothing about development. There are some FC in this rom according to some users. Flash this rom if you are fully aware of that.
This is a better link
http://www.drdevs.com/devs/teamliquid/official/Test/
TecknoFreak said:
This is a better link
http://www.drdevs.com/devs/teamliquid/official/Test/
Click to expand...
Click to collapse
You are fast, dude!
For those who also want to try, you might need 4.4.2 gapps from BaNK's theat: http://forum.xda-developers.com/showthread.php?t=2012857
or direct link here: http://www.androidfilehost.com/?a=show&w=files&flid=10306
Just installed and love it so far battery seems decent so far on my stock battery, settings are amazing, kind of like the ose interface but two flaws that I have to report in the 3.1.0 version there is a wifi bluetooth gps and sound toggle in my notifications that I can't figure out how to get rid of and the last and probably biggest flaw is when charging the phone goes crazy . lol I put in my charger and the sytemui freezes and disappears and brings me back to the lockscreen and repeats until I take it out.... Lol still charges but I'm going to reflash and see if it helps any or just flash the 3.0 version and see if there's a difference. Excellent find bro.
i just installed this and so far i like it. so far the only problem i encounter is i cant input the ATN. anyone has the same problem?
Sent from my MB886 using XDA Premium 4 mobile app
laofan said:
You are fast, dude!
For those who also want to try, you might need 4.4.2 gapps from BaNK's theat: http://forum.xda-developers.com/showthread.php?t=2012857
or direct link here: http://www.androidfilehost.com/?a=show&w=files&flid=10306
Click to expand...
Click to collapse
Lol yeah because i been testing this since before it was officially build for mb886. Lol
Also is about the same as Validus since come from same developers with the exemption of having theme manager from cyanogen.
Has anyone figured out how to remove this annoying notification toggle on this rom? Any help?
No is build to it. Lol
TecknoFreak said:
No is build to it. Lol
Click to expand...
Click to collapse
Seriously? The notification toggles kind of defeat the purpose when you have quick settings. I think there might be a way to modify the sytemui with apktoolsapktools or something because it gets really annoying especially since the quick pull down on this rom actually works there's no need for it. I'm going to look for a fix.
very very buggy/broken.
going into APN menu causes phone to crash
sound->volumes causes crash
many random force closes, etc.
on the other hand it is incredibly smooth.
centipedes said:
very very buggy/broken.
going into APN menu causes phone to crash
sound->volumes causes crash
many random force closes, etc.
on the other hand it is incredibly smooth.
Click to expand...
Click to collapse
Seems like you did a dirty flash or forget to wipe cache/davik.
Maybe try clean install again?
So far my only issue is FC in liquid wallpapers.
laofan said:
Seems like you did a dirty flash or forget to wipe cache/davik.
Maybe try clean install again?
So far my only issue is FC in liquid wallpapers.
Click to expand...
Click to collapse
no i didn't
centipedes said:
no i didn't
Click to expand...
Click to collapse
Yea, I had lots of issues with it as well. I really want to try it for an extended period, but with the FCs on adding an apn I have to wait and hope it gets an update. Really like the customizations available but without me being able to get data plan and mms I am not comfortable testing it more than an hour or two at home. So back to ProBam for the time being.
Black_halo said:
Seriously? The notification toggles kind of defeat the purpose when you have quick settings. I think there might be a way to modify the sytemui with apktoolsapktools or something because it gets really annoying especially since the quick pull down on this rom actually works there's no need for it. I'm going to look for a fix.
Click to expand...
Click to collapse
At first I thought this was the quickbar enabled via developer and thought we could just disable it. But no, it's "another" one besides that one..
centipedes said:
very very buggy/broken.
going into APN menu causes phone to crash
sound->volumes causes crash
many random force closes, etc.
on the other hand it is incredibly smooth.
Click to expand...
Click to collapse
laofan said:
Seems like you did a dirty flash or forget to wipe cache/davik.
Maybe try clean install again?
So far my only issue is FC in liquid wallpapers.
Click to expand...
Click to collapse
idontkn1 said:
Yea, I had lots of issues with it as well. I really want to try it for an extended period, but with the FCs on adding an apn I have to wait and hope it gets an update. Really like the customizations available but without me being able to get data plan and mms I am not comfortable testing it more than an hour or two at home. So back to ProBam for the time being.
Click to expand...
Click to collapse
System format, clean new rom install wipe caches. Using philz touch recovery. Tried to go to APN to get data working to log in google, Force closed.
Let me get it because i can't setup CM11
THX
same error as CM11......
set_metadata_recursive ; some changes failed
E:error in /(sd path)
(status 7)
maybe recovery problem?
using 6.0.3.2
before_c said:
Let me get it because i can't setup CM11
THX
same error as CM11......
set_metadata_recursive ; some changes failed
E:error in /(sd path)
(status 7)
maybe recovery problem?
using 6.0.3.2
Click to expand...
Click to collapse
Epinter's CM11 does clearly state 6.0.4.4 at a minimum is required for 4.4 ROMs....
Sent from my MB886 using xda app-developers app
palmbeach05 said:
Epinter's CM11 does clearly state 6.0.4.4 at a minimum is required for 4.4 ROMs....
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Use the recovery 6.0.4.4 for XT925/926 is OK?
before_c said:
Use the recovery 6.0.4.4 for XT925/926 is OK?
Click to expand...
Click to collapse
http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.4.4-mb886.img
jaweinre said:
download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.4.4-mb886.img[
Click to expand...
Click to collapse
Thx
======
headsets still can't use same as CM11......
why?
before_c said:
Thx
======
headsets still can't use same as CM11......
why?
Click to expand...
Click to collapse
Maybe its a common problem with CM11? This is still a relatively new ROM/Android version. Be patient and the devs will fix things.

CM12 Move to SD card

Hey guys can you guys tell me if any ROM got this feature working? On Lollipop of course.
Thanks I want to make sure is working like it should
It works in official cm12
Sent from my ATRIX HD using XDA Free mobile app
OK great
Thanks
I will put the fix anyway for order ROMs in vase someone needs it to fix it
TecknoFreak said:
I will put the fix anyway for order ROMs in vase someone needs it to fix it
Click to expand...
Click to collapse
It's great if you can post it I'm lazy to change rom now.
---------- Post added at 09:56 PM ---------- Previous post was at 09:55 PM ----------
Aingaran said:
It works in official cm12
Sent from my ATRIX HD using XDA Free mobile app
Click to expand...
Click to collapse
Can you write some review about official cm12? I'm using mujiu's one.
devilsking said:
It's great if you can post it I'm lazy to change rom now.
---------- Post added at 09:56 PM ---------- Previous post was at 09:55 PM ----------
Can you write some review about official cm12? I'm using mujiu's one.
Click to expand...
Click to collapse
I was on the official rom before I switched back to mijuus cm. Because its more stable
The best part with the official rom is that its more mainstream, and has app2sd capability.
Once you start going on an internet browser maybe a few minutes in it will crash unexpectedly. Sometimes it could cause a bootloop as well which for me, I had to hard reset my device to start over which is very annoying. It happens with all browsers.
Theres also a music bug as well, it could fc or crash when you are using a few more apps at the same time, especially games.
Edit: what a difference a week can make, faster roms, a fix/workaround I discovered Im now using Blisspop 2/23 version which has been handling some cm12 issues pretty well than other roms. Some issues could be caused by gapps(I recommend banks), bootanimation mem leak (theres a fix), and browsing the internet issue (sabermod in Blisspop is just a temp solution), all these contributions are key to make this device last more longer and I hope more will come
Whether it is some memory leak issues or it could mean that our device is getting more dated, we w
Justatechie said:
I was on the official rom before I switched back to mijuus cm. Because its more stable
The best part with the official rom is that its more mainstream, and has app2sd capability.
Once you start going on an internet browser maybe a few minutes in it will crash unexpectedly. Sometimes it could cause a bootloop as well which for me, I had to hard reset my device to start over which is very annoying. It happens with all browsers.
Theres also a music bug as well, it could fc or crash when you are using a few more apps at the same time, especially games.
Click to expand...
Click to collapse
Thank you so much. I think I will wait for more versions of nightly to be out before flashing
devilsking said:
Thank you so much. I think I will wait for more versions of nightly to be out before flashing
Click to expand...
Click to collapse
Its either that or wait to flash a new build from mijuu.
Justatechie said:
I was on the official rom before I switched back to mijuus cm. Because its more stable
The best part with the official rom is that its more mainstream, and has app2sd capability.
Once you start going on an internet browser maybe a few minutes in it will crash unexpectedly. Sometimes it could cause a bootloop as well which for me, I had to hard reset my device to start over which is very annoying. It happens with all browsers.
Theres also a music bug as well, it could fc or crash when you are using a few more apps at the same time, especially games.
Click to expand...
Click to collapse
The last build I tried from mijjus had the same problem. I switched back to stock now. Waiting for stable lollipop Roms. How stabe are they need more reviews.
Justatechie said:
I was on the official rom before I switched back to mijuus cm. Because its more stable
The best part with the official rom is that its more mainstream, and has app2sd capability.
Once you start going on an internet browser maybe a few minutes in it will crash unexpectedly. Sometimes it could cause a bootloop as well which for me, I had to hard reset my device to start over which is very annoying. It happens with all browsers.
Theres also a music bug as well, it could fc or crash when you are using a few more apps at the same time, especially games.
Click to expand...
Click to collapse
Omg. This has happened to me NUMEROUS times! Even with XDA app
Sent from my MB886 using Tapatalk
Yes, even tried four browsers...same result. Bootloop and/or force close
Sent from my MB886 using Tapatalk
marknoll said:
Yes, even tried four browsers...same result. Bootloop and/or force close
Sent from my MB886 using Tapatalk
Click to expand...
Click to collapse
Im not encountering this issue that much using the newest nightly of Blisspop. Try that its got linaro and sabermod built in, then set the governor to msm dcvs to prevent some memory leaks and at most what you could get is a fc and a reduced chance of a reboot.
Time to bring this thread back on topic,changes for cm12 move apps to sd card last week are reverted so back to square one. (im not bothered cuz nothing I see is getting moved)
Justatechie said:
Time to bring this thread back on topic,changes for cm12 move apps to sd card last week are reverted so back to square one. (im not bothered cuz nothing I see is getting moved)
Click to expand...
Click to collapse
AFAIK, nothing has been reverted.
The noemulatedsd vold flag is still in fstab and the sepolicy has been moved to common sepolicy in vendor/cm...
I'm not sure what you mean by "nothing I see is getting moved", could you please explain?
kabaldan said:
AFAIK, nothing has been reverted.
The noemulatedsd vold flag is still in fstab and the sepolicy has been moved to common sepolicy in vendor/cm...
I'm not sure what you mean by "nothing I see is getting moved", could you please explain?
Click to expand...
Click to collapse
Oh, it must an issue with the rom I am using possibly.
What happens is that it gets stuck on "moving" and then just stays there until reboot and then it is located in the internal memory.
When I saw something on github I thought that was the answer.
I just downloaded and flashed the newest nightly seems like everything is fine, idk what that was. bad download?! possibly
kabaldan said:
AFAIK, nothing has been reverted.
The noemulatedsd vold flag is still in fstab and the sepolicy has been moved to common sepolicy in vendor/cm...
I'm not sure what you mean by "nothing I see is getting moved", could you please explain?
Click to expand...
Click to collapse
Hi,
I m a atrix HD user. Can I know which ROM you are using. And if its lolipoo then how is it going?

Categories

Resources