Hi,
Had installed recently the ROM CM9-Stable, and was without any problem. After running out of battery, the phone to start peaked at loop in boot.
Tried flashing a rom 2.3.6 for Galaxy S i9000 (my GSM), by ODIN, and got a FAIL!
At the moment only have symbol on screen with a mobile phone, an orange triangle and a computer.
I still get access to download mode.
Someone who can help me?
Maybe try to flash some darky ressurection or other stock rom with odin?
Wysyłane z mojego GT-I9000 za pomocą Tapatalk 2
Is there any tutorial that I can follow? I'm noob in these things, little know more than install roms.
Thanks for tour response
jppm89 said:
Is there any tutorial that I can follow? I'm noob in these things, little know more than install roms.
Thanks for tour response
Click to expand...
Click to collapse
use a Ezbase or any other recovery kit chose from My android collections link below, guides included and you should be good to go as you are still in download mode without a bootable ROM
Soft Brick help
Maybe this will help you:
http://forum.xda-developers.com/showthread.php?t=1802778
If you can go into download mode most likely your phone is not brick. Try flashing JVU stock rom through. Just Google it you will find the instructions with files....
Sent from my GT-I9000 using xda app-developers app
flashing problem
i Wipe data/ factory reset
Wipe cache
Advanced -> Wipe dalvik cache
install zip from sdcard
wait until "install from sdcard complete"
reboot my phone.
but my phone remain in the start up animation..i waited upto 15 mints but it never goes to menu..plz help me out
kamran39006 said:
i Wipe data/ factory reset
Wipe cache
Advanced -> Wipe dalvik cache
install zip from sdcard
wait until "install from sdcard complete"
reboot my phone.
but my phone remain in the start up animation..i waited upto 15 mints but it never goes to menu..plz help me out
Click to expand...
Click to collapse
remove battery and go to recovery mode and re-install the zip(rom)
OK this has happend to me tons of times its not serious so don't worry your phone isn't bricked all you need to do it download a stock ROM and a cf root along with cwm in the kernel then flash the ROM with odin first then when it goes over all the checks (and probly fails them ) go back in to download mode and flash the rooted kernel with Odin then it will reboot THEN pull the battery and go in to recovery mode and flash a .zip that you have on the root of your sdcard with cwm and reboot and your done
Related
Hello everyone, I probably brick my s5570.. it constantly reboots after loading the first samsung image and the second one with the phone model. i can access at the recovery mode but when I try to change rom from sd, the installation aborting after an error.Same thing if I try to return to the factory settings. Also i tried with odin but the phone is not detected, and the problem can't be a bad installation of odin or drivers because i got another S5570 and I tried it and it works perfectly. I have not tried only with jig. have anyone other ideas or procedures by suggesting? Thanks
wipe
turc182 said:
Hello everyone, I probably brick my s5570.. it constantly reboots after loading the first samsung image and the second one with the phone model. i can access at the recovery mode but when I try to change rom from sd, the installation aborting after an error.Same thing if I try to return to the factory settings. Also i tried with odin but the phone is not detected, and the problem can't be a bad installation of odin or drivers because i got another S5570 and I tried it and it works perfectly. I have not tried only with jig. have anyone other ideas or procedures by suggesting? Thanks
Click to expand...
Click to collapse
have you tried wiping data? cache?
can press "Thanks" if i helped.;]
what error you get while doing task in cwm
yes i tried with all the option in the android systemrecovery,but nothing...the error is "rfs for at failed on dev stl13" or "rfs for at failed on dev stl14" if i try with wipe data or wipe cache and "error in tmp/sideload package.zip (status 0) installation aborted" if i try to change a rom
any idea?
turc182 said:
yes i tried with all the option in the android systemrecovery,but nothing...the error is "rfs for at failed on dev stl13" or "rfs for at failed on dev stl14" if i try with wipe data or wipe cache and "error in tmp/sideload package.zip (status 0) installation aborted" if i try to change a rom
Click to expand...
Click to collapse
Android system recovery ?
Are you not using CWM recovery !?!
Sent from my GT-S5570 using XDA
are you using ROM manager?
i tried to flash the cwr but nothing cause odin dont see my phone..i tried only with odin or with the flash by recovery,not with rom manager
You dint brick the phone I think...answer these questions carefully ---
1. What rom are u using? Stock or custom?
2. Did u properly download the rom? To verify, open the rom on PC and see if its opening or giving error.
3. If the above problem is true..download again and flash again
4. What cwm recovery are u using? ?
5. If Odin not detecting, have u installed KIES in PC? Without kies and mini drivers, Odin won't detect.
6. Check whether USB cable is working or not...
7. Have u wiped data and cache before flashing new rom?
freakyfriday said:
You dint brick the phone I think...answer these questions carefully ---
1. What rom are u using? Stock or custom?
2. Did u properly download the rom? To verify, open the rom on PC and see if its opening or giving error.
3. If the above problem is true..download again and flash again
4. What cwm recovery are u using? ?
5. If Odin not detecting, have u installed KIES in PC? Without kies and mini drivers, Odin won't detect.
6. Check whether USB cable is working or not...
7. Have u wiped data and cache before flashing new rom?
Click to expand...
Click to collapse
answers 1-2
this phone was complety stock and dont boot.i flashed the root with the android system recovery,the i tried to return to the factory setting without success,the same with the wipe data or cache.then i tried to flash with the android system recovery another rom ([ROM][Samsung gt-s5570]MiniMod X FINAL -very mini very fast) and give me the error,the same with other rom.All the procedures were tested more times.
answers 4-5-6-7
i tried to flash the cwm without success from the sd..i dont try kies, but odin and drivers are all ok because detected the other s 5570 that i have..the usb cable is ok. I tried to wipe data but give me an error (i wrote the errors in the other post)
no idea??
Well try first put your device in download mode (power button+volume down+home button)
If success open odin connect your phone to PC and to flash (install) CWM put:
OPS--OPS
then mark one package and put
ONE PACKAGE-- CWM file.
Hope ti helped.
It will take about 3-5 min.
suky08 said:
Well try first put your device in download mode (power button+volume down+home button)
If success open odin connect your phone to PC and to flash (install) CWM put:
OPS--OPS
then mark one package and put
ONE PACKAGE-- CWM file.
Hope ti helped.
It will take about 3-5 min.
Click to expand...
Click to collapse
freakyfriday said:
You dint brick the phone I think...answer these questions carefully ---
1. What rom are u using? Stock or custom?
2. Did u properly download the rom? To verify, open the rom on PC and see if its opening or giving error.
3. If the above problem is true..download again and flash again
4. What cwm recovery are u using? ?
5. If Odin not detecting, have u installed KIES in PC? Without kies and mini drivers, Odin won't detect.
6. Check whether USB cable is working or not...
7. Have u wiped data and cache before flashing new rom?
Click to expand...
Click to collapse
turc182 said:
answers 1-2
this phone was complety stock and dont boot.i flashed the root with the android system recovery,the i tried to return to the factory setting without success,the same with the wipe data or cache.then i tried to flash with the android system recovery another rom ([ROM][Samsung gt-s5570]MiniMod X FINAL -very mini very fast) and give me the error,the same with other rom.All the procedures were tested more times.
answers 4-5-6-7
i tried to flash the cwm without success from the sd..i dont try kies, but odin and drivers are all ok because detected the other s 5570 that i have..the usb cable is ok. I tried to wipe data but give me an error (i wrote the errors in the other post)
Click to expand...
Click to collapse
odin dont recognized my phone..i explain this up here..
Hi. You're in a big problem i see :/ u tried heimdall alternatively to odin?? First check if our mini it's compatible... I don't remember.
Inviato dal mio GT-S5570 usando Tapatalk
turc182 said:
Hello everyone, I probably brick my s5570.. it constantly reboots after loading the first samsung image and the second one with the phone model. i can access at the recovery mode but when I try to change rom from sd, the installation aborting after an error.Same thing if I try to return to the factory settings. Also i tried with odin but the phone is not detected, and the problem can't be a bad installation of odin or drivers because i got another S5570 and I tried it and it works perfectly. I have not tried only with jig. have anyone other ideas or procedures by suggesting? Thanks
Click to expand...
Click to collapse
Hi bro, because you did it the wrong way that's the problem "never ever, flash a custom rom from stock recovery"
now your phone isn't bricked but in amnesia and need to be revived, this is the cure :
since you're able to access stock recovery that let you flash cwm recovery from there:
1- download the custom recovery (update-CWM-5.2.0.8-touch-squadzone.zip) from here http://www.mediafire.com/?xk637cg12kt2cl0
2- copy it to your sd card (through card reader via your pc) then reboot the phone to recovery mode (press and hold power button+home button)
3- on android stock recovery hit "apply update from sdcard" then choose "update-CWM-5.2.0.8-touch-squadzone.zip" wait till it shows "install from sdcard complete"
4-Turn Off your phone, remove your sdcard then put a custom rom on it, insert back the sd card into phone then reboot to recovery mode
5- now you should see the new custom recovery, in the list choose: Wipe data/factory reset, wipe cache partition then hit install zip from sdcard and choose your custom rom
6-after completing install process, wipe data and cache then hit reboot system
7-if all goes well your phone will boot normally like it should
abdovar said:
Hi bro, because you did it the wrong way that's the problem "never ever, flash a custom rom from stock recovery"
now your phone isn't bricked but in amnesia and need to be revived, this is the cure :
since you're able to access stock recovery that let you flash cwm recovery from there:
1- download the custom recovery (update-CWM-5.2.0.8-touch-squadzone.zip) from here http://www.mediafire.com/?xk637cg12kt2cl0
2- copy it to your sd card (through card reader via your pc) then reboot the phone to recovery mode (press and hold power button+home button)
3- on android stock recovery hit "apply update from sdcard" then choose "update-CWM-5.2.0.8-touch-squadzone.zip" wait till it shows "install from sdcard complete"
4-Turn Off your phone, remove your sdcard then put a custom rom on it, insert back the sd card into phone then reboot to recovery mode
5- now you should see the new custom recovery, in the list choose: Wipe data/factory reset, wipe cache partition then hit install zip from sdcard and choose your custom rom
6-after completing install process, wipe data and cache then hit reboot system
7-if all goes well your phone will boot normally like it should
Click to expand...
Click to collapse
thanks man..i did all that you explain..the new custom recovery is installed but when i tried to wipe data,it was blocked(while the wipe cache success).i tried to install a new rom, the installation successful.but when i reboot the phone,it freeze in the first screen..
Double post..
Sent by Mister Mini ®
Wipe data/cache before and after you flash the rom.. or reinstall the rom again.. and by the way, you have GB installed before you did all these, right? Just making sure you did not install all these with froyo..
Sent by Mister Mini ®
I had a working stock firmware until I decided to install this http://forum.xda-developers.com/showthread.php?t=1793511
First it worked after few application installation and restart, I had booting loop problems, the Samsung Animation at start up then the Samsung Text and stuck in it for ever ..
I used Odin to flash to stock firmware DDKQ7_annson08.tar.md5, previously it worked. I did factory reset and wipe cache, but still the same problem,
I tried flashing for three times but no luck. I did the factory reset and wipe cache both before the flashing and after the flashing but no luck.
Please give me some ideas to fix it.
Whenever I quit the default stock firmware recovery it says Can't mount data partition
E: failed to mount /data invalid argument something like this.
Help
Have you installed it through ClockWorkMod recovery?
The steps needed to follow precisely is:
- Install Stock GB Firmware through Odin (You'll get it from Sammobile)
(It would be helpful if you specified the link where you installed the stock firmware)
- Install CWM recovery through Odin
- Boot into recovery and wipe data/cache/dalvik-cache/battery stats
- Install Zip from SD card
- Again wipe data/cache/dalvik-cache/battery stats
- Reboot
EDIT: I guess you installed/updated to GB from this link:
http://forum.xda-developers.com/showthread.php?t=1551586
If you updated from Froyo to GB with that link, it won't work because the bootloaders are removed from them. In order for Gingerbread/ICS/JB to work you need to have GB bootloader. So search in Sammobile and install stock firmware from there.
download stock fw from yagyagaire.blogspot.com
n then to move further..
Sent from my GT-S5570 using xda app-developers app
flash 4 package file it will write /data partition
coolsandie said:
Have you installed it through ClockWorkMod recovery?
The steps needed to follow precisely is:
- Install Stock GB Firmware through Odin (You'll get it from Sammobile)
(It would be helpful if you specified the link where you installed the stock firmware)
- Install CWM recovery through Odin
- Boot into recovery and wipe data/cache/dalvik-cache/battery stats
- Install Zip from SD card
- Again wipe data/cache/dalvik-cache/battery stats
- Reboot
EDIT: I guess you installed/updated to GB from this link:
http://forum.xda-developers.com/showthread.php?t=1551586
If you updated from Froyo to GB with that link, it won't work because the bootloaders are removed from them. In order for Gingerbread/ICS/JB to work you need to have GB bootloader. So search in Sammobile and install stock firmware from there.
Click to expand...
Click to collapse
Yes I used the one from the url you mentioned but previously it worked I don;t know how ? I always used the same to revert back to stock firmware.
Then I downloaded the official stock firmware for india from http://yagyagaire.blogspot.com/2012/01/official-samsung-firmwares.html#.UCPX3PbibOs
S5570DDKQ7
PDA: S5570DDKQ7
CSC: S5570ODDKQ6
OPS: TASS.OPS
Version: Android 2.3.6 Gingerbread
Country: India
Released: November 2011
I flashed it but still the same problem can anyone please give me step by step guide.. am lost and nothing getting in my head
I also flashed cwm recovery via Odin and Installed the custom firmware but still stuck in the logo,
the dalvik cache flush option doesn't work in cwm recovery is this the reason ?
Bump.. my mobile is NP can I flash this one this has boot files also ? http://www.androidaddicted.com/firm...read-2-3-6-s5570jvkt1-firmware-update-38.html please help
camelgrg said:
Bump.. my mobile is NP can I flash this one this has boot files also ? http://www.androidaddicted.com/firm...read-2-3-6-s5570jvkt1-firmware-update-38.html please help
Click to expand...
Click to collapse
Yes, its okay to flash that.
camelgrg said:
I had a working stock firmware until I decided to install this http://forum.xda-developers.com/showthread.php?t=1793511
First it worked after few application installation and restart, I had booting loop problems, the Samsung Animation at start up then the Samsung Text and stuck in it for ever ..
I used Odin to flash to stock firmware DDKQ7_annson08.tar.md5, previously it worked. I did factory reset and wipe cache, but still the same problem,
I tried flashing for three times but no luck. I did the factory reset and wipe cache both before the flashing and after the flashing but no luck.
Please give me some ideas to fix it.
Whenever I quit the default stock firmware recovery it says Can't mount data partition
E: failed to mount /data invalid argument something like this.
Help
Click to expand...
Click to collapse
Hello camerg,
There can be many indication of the problem that you are facing... It looks like you are from India, so I suggest you to flash this latest official Indian firmware using Odin. Full instructions are at : http://yagyagaire.blogspot.com/2011/12/how-to-upgrade-samsung-galaxy-pop-to.html
After flashing the rom, wait till Odin says PASS and then go to recovery and do a data and cache wipe and reboot your handset. Your galaxy mini should boot fine.
If your handset doesn't boot still then, install CWM using Odin and then flash any custom rom using clockwork mod recovery. Now after flashing the rom wait for few minutes and your handset should boot fine.
Good Luck and Happy flashing!
Hey man, how are you doin'?
were you able to flash it using odin and followed all of the steps these guys informing you and the links given to you.
which one, if you are stuck on the Samsung logo and it doesnt wanna go all the way through, you either go and visit the service center or if you know a repair shop, go there and your phone needs JTAGGING. if your phone is stuck on the SAMSUNG logo.
if you can access the stock recovery mode, install the latest CWM, go to the mounts and storage > select format data, cache, system, and SD-ext. this similarly happened to me. i selected the wipe data/factory reset option but it didnt resolve the problem and it is saying something like E: error cant mount yada yada yada.... i wiped them one by one and worked.
your phone wont be needing JTAGGING if you can access the recovery mode of it. it means that your phone's system (Hardware) has no damaged in it, it is your phone's software. do these steps in order for the phone to wipe everything by doing it one by one
give us a reply if this worked.
Hi
Go and flash a stock 2.3.6 ROM from Samfrimware.com using odin after you get pass sign from odin if you get boot loop clear data an cache from recovery and reboot if you get boot loop flash the file that is same to your ROM with Odin from here like if you downloaded gt-s5570 jpkt2 then the jpkt2 PDA file
http://forum.xda-developers.com/showthread.php?t=1398797
And partion your SD card to ext4 to be your new data partion and the secondary partion that you must fat if you have a 2gb SD or smaller and if you have 4gb SD or larger select fat32 and the two partions must be primary then pot your SD in the phone and reboot this will make the phone mount the ext4 partion as your phones data partion so if there are a problem with the phones data partion it will make the work again
Sent from my GALAXY mini using xda premium
Hi everyone so i was using my n7000 on stock GB for daily and suddenly it stopped working and wouldn't boot ( stock on SAMSUNG brand ), even if i can get to download mode and recovery and flash stock again , doesn't work . here is a list of thing i tried :
- flash stock GB KKA ( with and without pit )
- flash rooted stock GB KJ1 ( with and without pit )
- flash stock ICS LRI ( with and without pit )
- flash stock ICS LRI then flash CF Root
- tried adb to push the a custom zip rom and boot directly in the installing but doesn't work
- tried repartition of the memory and reflash the stock roms
none of this seem to work always same problem i'm still stuck at the brand logo, oh and i tried putting the custom rom zip on external sdcard but it doesn't get detected in cwm
here is a list of errors that i get when trying to flash from cwm :
- error couldn't mount /sdcard
- couldn't moun't /emmc
- unable to write to ums lumfile (no such file or directory)
I'm runing out of ideas, is there something that i missed ? all suggestions are appreciated, Many thanks
Did you get errors while flashing with Odin ? If not, you are clear fromm emmc bug.
Try doing a factory reset in recovery (wipe data, factory reset)
lionelia said:
Did you get errors while flashing with Odin ? If not, you are clear fromm emmc bug.
Try doing a factory reset in recovery (wipe data, factory reset)
Click to expand...
Click to collapse
no i don't get error on odin, and yes i tried wiping data / cache/dalvik / format system / format emmc ... many times
nothing work :/
You should try to restore bootloader
1.Flash ClockWorkMod Recovery.
2.Wipe everything - Data,Cache,Dalvik Cache etc.
3.Then re-boot the device.
4.When it comes to the Samsung logo take out the Battery and then power on the device.
5.Wait 15 minutes-20 minutes and do something else in the meantime to ward of anxiety.
6.If the device doesn't start properly try removing sim and sd card and re-trying steps 2 to 5.
7.If that also fails then do step 2 to 4 and then enter download mode.
8.Flash stock GB or ICS.
9.When the device boots to the Logo, remove the battery.
10.Disconnect from PC and then re-boot and then wait for 15-20 minutes.
Just my two cents! Let me know if it works! If it doesn't then no other go then to take it to a service center.
Sent from my Xperia Pro using xda app-developers app
better flash a GB rom.. does it say pass in odin and successful? if no, then paste the logs
Try flashing a stock ODEX rom. I'd personally go for the Rooted_Stock_Odex_N7000XXLC1, as its a full-wipe, rooted GB rom. Flash that in Odin and you shouldn't have any problems.
http://forum.xda-developers.com/showthread.php?t=1535025
ajabhi95 said:
1.Flash ClockWorkMod Recovery.
2.Wipe everything - Data,Cache,Dalvik Cache etc.
3.Then re-boot the device.
4.When it comes to the Samsung logo take out the Battery and then power on the device.
5.Wait 15 minutes-20 minutes and do something else in the meantime to ward of anxiety.
6.If the device doesn't start properly try removing sim and sd card and re-trying steps 2 to 5.
7.If that also fails then do step 2 to 4 and then enter download mode.
8.Flash stock GB or ICS.
9.When the device boots to the Logo, remove the battery.
10.Disconnect from PC and then re-boot and then wait for 15-20 minutes.
Just my two cents! Let me know if it works! If it doesn't then no other go then to take it to a service center.
Sent from my Xperia Pro using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply i'll give it a shot and see if it works
nokiamodeln91 said:
better flash a GB rom.. does it say pass in odin and successful? if no, then paste the logs
Click to expand...
Click to collapse
Flashing in odin is perfectly normal there is no errors no weird messages and it flash in normal time
Your last chance is to flash bootloader with Odin, anyway it wont be worst.
My Samsung Galaxy Note N-7000 is stuck on Samsung logo, I have some photos still not backup, I tried to root my device but unsuccessful:crying:. How can i backup my data? or what can i do in recovery mode?
What steps did you take to root?
Sent from my GT-N7000 using xda premium
Thank you for your reply. Here are the steps i did:
1. I was download a file (00-Note_ICS_Root) on other website. when i unzip this file, there are two files CWM.zip (clockworkmod recovery) & SU-Busybox-Installer.zip.
2. Copy them to external micro sdcard, and boot into recovery mode
3. Choose "apply update from external storage"
4. Go to "00-Note_ICS_Root" folder and choose CWM.zip, the screen show a few lines of texts and boot into ClockworkMod Recovery
5. There are 7 options, (1. reboot system now, 2. install zip from sdcard, 3. wipe data/ factory reset, 4. wipe cache partition, 5. backup and restore, 6. mounts and storage, 7. advanced) I was choose option 2, then follow the steps and choose the "SU-Busybox-Installer.zip"
6. After the phone loading something and show completed, reboot system.
00-Note_ICS_Root attached for your reference, thanks!
ICS and cwm.zip: risk of hard bricking your device.
So, if you only choose option 2 this shouldn't have happened until now.
But stop using this!
First of all get into safety:
Download a JB stock Rom and install it with PC Odin (read here).
If this works then you didn't brick your device.
After this you can try to root your device again (if you really need this and accept to learn and read).
ThaiDai, I have fixed the problem and get back my data already, thank you so much for your help!
Galaxy Note stuck on samsung screen
karsonleung said:
ThaiDai, I have fixed the problem and get back my data already, thank you so much for your help!
Click to expand...
Click to collapse
How did you fix it?
I recently flashed Paranoid android 3.9 on a Galaxy Note N-7000, was working fine until it switched off. Every time I switch it on, it doesn't go past the "Samsung Galaxy Note" boot page. I can't get to the recovery options either.
Please Help!
Flash a custom kernel tar file from odin (like philz) and thus will give you access to recovery. Then you can reflash the same rom again.
OR
Flash a stock JB rom using odin and phone in download mode.
Sent from my GT-I9500 using xda premium
fuelrodgun said:
How did you fix it?
I recently flashed Paranoid android 3.9 on a Galaxy Note N-7000, was working fine until it switched off. Every time I switch it on, it doesn't go past the "Samsung Galaxy Note" boot page. I can't get to the recovery options either.
Please Help!
Click to expand...
Click to collapse
I had same issue. In recovery mode I did again dirty flashed the pa ROM and then cleared the dalvik cache (which is important)
This should do the trick
Sent from my GT-N7000 using Tapatalk 2
Solution
Please do Following:-
Normally such problems occur if Dirty Flash is made. you need to boot into recovery and wipe data, cache and Delvik Cache.
If you cant boot into recovery unfortunately you have to do what i suggest in succeeding lines;
Download Stock Rom and Odin on PC from here http://forum.xda-developers.com/showthread.php?t=1424997
there is also a guideline how to flash Stock rom with Odin.
Home+Vol Down+ Power button will take you to Download Mode. Press volume up button once and connect the phone to PC. Open Odin and Flash the stock rom (Complete Guide on above referred thread)
Once done with it .. let the phone to start
Now download Philz Recovery from here http://forum.xda-developers.com/showthread.php?t=1901191
Please remember to download corresponding recovery as mentioned in Post 2 & 3
Put it into SD card
Now boot into Recovery mode. With Default Recovery Flash Philz Recovery and Reboot into Recovery.
Now your Note is rooted and you can safely install any Rom .. Remember always be on safe kernel before you flash any rom
I've been running the SOKP ROM which runs kitkat 4.4.4 and I decided to give this phone to my younger bro, but he says he wants the original samsung ROM so I download the ROM from sammobile and also the latest philz kernel. I flashed the kernel from recovery and rebooted, wiped dalvik/cache, formatted system/cache/preload and then flashed the ROM...
BUT..
when I flash the ROM, it starts and then the installation aborts on its own. I've tried it a few times. Did all the wipes again, still no luck.
Can anyone please tell me how to switch from the SOKP rom to TW ? I tried the same method last time and it worked, but this time it just doesn't go that way... What am I doing wrong?
Just use odin, don't use your recovery
Flash with Odin
Go into recovery mode
Wipe data
Reboot
?
Profit!
Thing is, I've never used Odin before and I'm not sure how its supposed to work..
Can you tell me if its correct please..
I rebooted to download mode and the phone just says "Downloading.. Don't turn off target" (This is the first time I started download mode so I'm not sure if it was supposed to say that)
Does Odin show a sign which tells us the phone is connected? (Sammobile says "Wait till blue sign appears in odin".. I didn't see any)
Does the yellow triangle appear if we flash the stock ROM or is it only for custom ROMs?
Edit : I tried to add the .zip file to AP but it won't add.. And there's so many options here they confuse me.. I'm scared :crying:
XxPixX said:
Just use odin, don't use your recovery
Flash with Odin
Go into recovery mode
Wipe data
Reboot
?
Profit!
Click to expand...
Click to collapse
I managed to work it out with odin but I still have just ONE more question.. in recovery should I go to mounts/storage and wipe data there? Or just do the wipe data/factory reset?
aurator said:
I managed to work it out with odin but I still have just ONE more question.. in recovery should I go to mounts/storage and wipe data there? Or just do the wipe data/factory reset?
Click to expand...
Click to collapse
The wipe data/factory reset will do.