Database Develop

[Q][Resolved] Unable to do something using CWM and unable to write on /system

Hi I'm unable to make a backup using the CWM, stuck while backing up "bb"
Code:
CWM-based Recovery v5.0.2.7
SD Card space 12492MB
backing up boot image...
backing up system...
bb
the backup process is stuck on bb (i've wait more than one hour)
I've also test on cwm 5.5
I'm using the franco kernel and the same problem on the r4 and r5
my flash hystory:
Stock GB -> Stock GB (newer) with root -> stock LPY (using Mobil odin for flash with chainfire kernel) (3 hours after, read warning about brick) -> stock GB using odin PC -> factory reset under GB -> (waiting a long time...) -> install cwm -> flash Criskelo's ICS V5.1 and without reboot flash franco kernel r5 -> trying to make a backucp (stuck on bb) -> wipe /data, /cache, /davil cache then trying to make a backup (still stuck on bb) -> try to flash Cassie's XtraLiteRom ICS Version 2.9 LQ2 stuck at the begenning -> flash franko kernel r4 and try to make a backup and still stuck on bb
I've made only one factory reset under android's ui and it was on GB, juste after roll back from LPY, and I've made only one full wipe under ICS (franko kernel r5 (Removed MMC_CAP_ERASE and chainfire's fix in cwm 5.5) so it might to be safe ?
How can I check if I've a damaged emmc chip ?
why i've these problems ?
Thanks
EDIT:
FIXED: http://forum.xda-developers.com/showpost.php?p=27169589&postcount=20

Up, nobody have an idea for solve my problem ??

You can use "gotbrickbug" in themes/apps by chainfire to see if you have dangerous firmware but there's no way to know if your emmc chip is damaged already unless its bricked.

andreww88 said:
You can use "gotbrickbug" in themes/apps by chainfire to see if you have dangerous firmware but there's no way to know if your emmc chip is damaged already unless its bricked.
Click to expand...
Click to collapse
I've tested the app yesterday and i've the brickbug (0x19 driver) but I havn't made any wipe on no-safe ics and I spend only 3 little hours on the stock LPY

Hi WormsCH,
You wrote stock LPY (using Mobil odin for flash with chainfire kernel) (3 hours after, read warning about brick) what version of CF-Root did you use then ? Did you perform wipe data/factory reset with it ?
Unfortunately it sounds like superbrick.

Boy124 said:
Hi WormsCH,
You wrote stock LPY (using Mobil odin for flash with chainfire kernel) (3 hours after, read warning about brick) what version of CF-Root did you use then ? Did you perform wipe data/factory reset with it ?
Unfortunately it sounds like superbrick.
Click to expand...
Click to collapse
He didn't do a data wipe on any of the bad kernels, he said he used franco. Sounds like a corrupted file or something.
Get into download mode and Odin back to gingerbread.

Boy124 said:
Hi WormsCH,
You wrote stock LPY (using Mobil odin for flash with chainfire kernel) (3 hours after, read warning about brick) what version of CF-Root did you use then ? Did you perform wipe data/factory reset with it ?
Unfortunately it sounds like superbrick.
Click to expand...
Click to collapse
I've used the first CF-Root for LPY released by chainfire.
I havn't made any wipe or factory reset under LPY.
just spent 3 hours (internet browsing, drawing, take some pictures) and after I'had read the brick bug, I've used odin PC for flash official GB and perform a factory reset under GB

andreww88 said:
He didn't do a data wipe on any of the bad kernels, he said he used franco. Sounds like a corrupted file or something.
Get into download mode and Odin back to gingerbread.
Click to expand...
Click to collapse
I get back on GB using Odin, then install CWM (I can perform a backup with the cwm under GB).
Then flash Criskelo's ICS V5.1 -> advanced -> reboot recovery
-> wipe cache/data => stuck while wiping...
get back under GB (Odin)-> install CWM -> flash franko kernel -> advanced, reboot recovery -> flash a rom => stuck at the begining...
it appear than each action on cache/data under ICS got stuck

I get back to GB LC1 stock frimware with PIT file, then flashed the pre rooted LC1, then install cwm for LC1.
-> wipe cache/data
-> install Criskelo's ICS V5.1 -> advanced -> reboot recovery
-> trying to make a backup and still stucked at the end of system backuping (bb)
how can I solv it ????
what it this problem ?
what can I try for solve my problem ?
Have I a dammaged chip ?

nobody can help me ?

WormsCH said:
nobody can help me ?
Click to expand...
Click to collapse
It is superbricked.
Flash stock kernel and send it to SSC. MoBo needs to be replaced.

Boy124 said:
It is superbricked.
Flash stock kernel and send it to SSC. MoBo needs to be replaced.
Click to expand...
Click to collapse
how can I explain to Sammy than I've a problem with my note...
Under GB evrything seem to works correctly and under the CWM on a GB kernel i can backup, restor, flash etc....
under ICS i got stuck when backup, restor, or flash a rom (flash kernel and some fixes seem to works)
Ive the same issue on franco kernel r4 and r5

If you can be on GB, it's obviously not super bricked. I'm sorry I haven't responded sooner. Went to bed last night and forgot to get back on this morning and check it out. Let me read slowly back through everything and see what I can come up with. Go back to Gingerbread right now and root it and get CWM recovery.
---------- Post added at 10:42 AM ---------- Previous post was at 10:37 AM ----------
WormsCH said:
I get back on GB using Odin, then install CWM (I can perform a backup with the cwm under GB).
Then flash Criskelo's ICS V5.1 -> advanced -> reboot recovery
-> wipe cache/data => stuck while wiping...
get back under GB (Odin)-> install CWM -> flash franko kernel -> advanced, reboot recovery -> flash a rom => stuck at the begining...
it appear than each action on cache/data under ICS got stuck
Click to expand...
Click to collapse
Okay, you can't flash Franco kernel on GB so that would explain it not working I think.
Like I said last post, get on Gingerbread w/ root and CWM. Flash an ICS rom (I would suggest CM9 variation but that's just me). If you flash a Samsung ICS rom thats fine but don't wipe data. Wipe cache and dalvik. Flash Franco or Speedmod if on Sammie ICS rom. Let it boot up. If it doesn't boot, wipe data (only if on the safe kernel).
Edit:
Also, sounds like you having problems with the Franco kernel. Will you try Speedmod kernel?

andreww88 said:
If you can be on GB, it's obviously not super bricked. I'm sorry I haven't responded sooner. Went to bed last night and forgot to get back on this morning and check it out. Let me read slowly back through everything and see what I can come up with. Go back to Gingerbread right now and root it and get CWM recovery.
---------- Post added at 10:42 AM ---------- Previous post was at 10:37 AM ----------
Okay, you can't flash Franco kernel on GB so that would explain it not working I think.
Like I said last post, get on Gingerbread w/ root and CWM. Flash an ICS rom (I would suggest CM9 variation but that's just me). If you flash a Samsung ICS rom thats fine but don't wipe data. Wipe cache and dalvik. Flash Franco or Speedmod if on Sammie ICS rom. Let it boot up. If it doesn't boot, wipe data (only if on the safe kernel).
Edit:
Also, sounds like you having problems with the Franco kernel. Will you try Speedmod kernel?
Click to expand...
Click to collapse
I can flash franco kernel from a GB kernel, and I can boot to ICS and use my phone on ICS, evrything seem to works (not fully tested) but, when I'm on ICS kernel (the franco kernel) I can't flash other rom, or make a backup, or restor a backup or sometime wipe data and cache from CWM, just get stuck, need to remove battery or wait with power button hold down.
Once my phone reboot I'm still under ICS and my phone is still working
From CWM under ICS kernel, I can switch between franco kernel r4 and r5, but that's all.
the issue seem to be only on CWM with an ICS kernel. Maybe could I try to write something on /system for see if it's work ?
EDIT:
I'll test the SpeedMod kernel

WormsCH said:
I can flash franco kernel from a GB kernel, and I can boot to ICS and use my phone on ICS, evrything seem to works (not fully tested) but, whene I'm on ICS kernel (the franco kernel) I can't flash other rom, or make a backup, or restor a backup or sometime wipe data and cache from CWM, just get stuck, need to remove battery or wait with power button hold down.
Once my phone reboot I'm still under ICS and my phone is still working
From CWM under ICS kernel, I can switch between franco kernel r4 and r5, but that's all.
the issue seem to be only on CWM with an ICS kernel. Maybe could I try to write something on /system for see if it's work ?
Click to expand...
Click to collapse
Yeah, definitely not bricked then. So, have you TRIED another kernel, like Speedmod? Or just franco ones?
You might not have complete root. So yeah, open up root explorer (or something equivalent) and try to paste a file in /system (make sure you are on R/W). See if that works. If it does, you have root.
I'd say go back to Gingerbread and flash a CM9 rom this time and see if that works just so we can rule out something.

Sorry. It is not super brick.
Did you try different ICS kernels ?
See if you can finish backup with speedmod kernel.

Hi, sorry for long reply.
I've flashed SpeedMode Kernel, and when I tryed to make a backup, the backup stuck at the begin (camera_shoot.ogg)
I tryed to write something to /system, but I wasn't correctly root, so I installed SU-installer.zip from cwm then reboot, i was root, but unable to remount /system in rw mode, and unable to install superSU.
i've tested to write on /system under GB, and it's working.
Why can't I remount /system under ICS ??
EDIT:
on ICS the /system is on /dev/block/mmcblk0p7 and on GB the /system partition is on /dev/block/mmcblk0p9
could mmcblk0p7 be dammaged ??

WormsCH said:
on ICS the /system is on /dev/block/mmcblk0p7 and on GB the /system partition is on /dev/block/mmcblk0p9
could mmcblk0p7 be dammaged ??
Click to expand...
Click to collapse
the mmcblk0p7 equal to cache on GB

up ?

FIXED !!
Finally get it worked !!
I'll describ all the steps for others who can have this issue.
Some steps are maybe useless, but after 4 days of test, flash, wipe, softbrick It's finally works.
-I've flashed with Odin PC: N7000XXKKA -- 2.3.6 201--November-- N7000OXXKK5 --Switzerland and I used the .pit file "Q1_20110914_16GB.pit"
-boot in default recovery for wipe data/cache
-full boot on GB then type *#272*IMEI# then change the CSC to AUT (was on KOR ) Auto reboot & wipe after apply
-After reboot, apply the OAT update N7000XXLA6--2.3.6--2012 January N7000OXXLA1--Switzerland (~75MB)
-Flash with pdin PC the AbyssNotekernel42CWTouchOriginalLogo (this setp Add the warning triangl and incrase counter) after that step I was able to backup and write on /system
-Flash without wipe the KingDroid ICS NoteMania Edition v2.0 after that step I was still able to make a backup under the new CWM and write on /system under ICS
-Flash without wipe Criskelo's ICS V5 then without reboot, the 5.1 fix, then the 15 Scrolling Toggles SystemUI, then the franco r5, then reboot.
after that I was still able to backup and write on /system
-Boot in recovery -> wipe /data, /cache, /davil cache then restored my google account and all my apps.
now I'm able to write on /system and make a backup on CWM
I hop this will help other people
And Thanks for your help

Please help, Stuck on Paranoid android animation.

Hello,
I was using the Anidroid Rom with my galaxy note.
Then I flashed it with abyss, and and wipe out data/factory reset.
then installed Paraandroid, and then gapp-hybrid.
But my phone starts and stuck on paranoid android animation at start.
I even tried to wipe all data again, even used darkside cache wipe and super wipe also.
But still no luck, Please help me to get paranoid android.

jeet.chaudhari said:
Hello,
I was using the Anidroid Rom with my galaxy note.
Then I flashed it with abyss, and and wipe out data/factory reset.
then installed Paraandroid, and then gapp-hybrid.
But my phone starts and stuck on paranoid android animation at start.
I even tried to wipe all data again, even used darkside cache wipe and super wipe also.
But still no luck, Please help me to get paranoid android.
Click to expand...
Click to collapse
Were you rooted on the base Android ROM? Was it GB? Whatever it was, first flash a standard GB using PC ODIN and then root it and then try a new ROM. You can get stock GB ROMs here
Cheers!

smaiitm said:
Were you rooted on the base Android ROM? Was it GB? Whatever it was, first flash a standard GB using PC ODIN and then root it and then try a new ROM. You can get stock GB ROMs here
Cheers!
Click to expand...
Click to collapse
Hi i flashed with PC odin after downloading stock rom from the link you gave, then i flashed Paranoid again, and later Gapps hybrid, but everytime i still stuck on the same oot animation.
I have even tried, full wipe means not only factory reset and cache wipe, but also format /data, format /system and and format /cache. but still no luck, stuck again.
I even have tried then darkside cache wipe 1st time, but not solved, then i also used darkside super wipe, but still no luck.
My phone is rooted, is there any other solution or anything that i am forgetting to do?
please help...!

smaiitm said:
Were you rooted on the base Android ROM? Was it GB? Whatever it was, first flash a standard GB using PC ODIN and then root it and then try a new ROM. You can get stock GB ROMs here
Cheers!
Click to expand...
Click to collapse
IT was ANIDROID ROM Which i was using from here http://forum.xda-developers.com/showthread.php?t=1761190 , before, but now i am using stock GB 2.3.6 which is also rooted, everytime i flash Paranoid Android, it stucks at boot animation, then i have to use restore.

jeet.chaudhari said:
IT was ANIDROID ROM Which i was using from here http://forum.xda-developers.com/showthread.php?t=1761190 , before, but now i am using stock GB 2.3.6 which is also rooted, everytime i flash Paranoid Android, it stucks at boot animation, then i have to use restore.
Click to expand...
Click to collapse
I am having a similar problem, but instead of getting stuck on boot screen my mobile goes back in CWM. I am trying to install LiquidSmooth 3.2 and am currently on Criskelo 5.1....when I tried to go from Criskelo 5.1 to 8, the phone got stuck on the boot screen. (Used Abyss Kernel to flash)

tariqsaleem said:
I am having a similar problem, but instead of getting stuck on boot screen my mobile goes back in CWM. I am trying to install LiquidSmooth 3.2 and am currently on Criskelo 5.1....when I tried to go from Criskelo 5.1 to 8, the phone got stuck on the boot screen. (Used Abyss Kernel to flash)
Click to expand...
Click to collapse
I also tried to doing flash with abyss and speedmod also, but none was successfull, i do not get any error message, but after doing all procedure when i reboot my device, it is started but when paranoid logo appears, it goes in loop, may be this only called as boot loop, i tried 9-10 times doing all this, finally restored GB now, Lets see for solution then i will try again, to flash paranoid android.

When in bootloop, remove battery and try agaim after 10 minutes.
Sent from my GT-N7000 using xda app-developers app

praetorius said:
When in bootloop, remove battery and try agaim after 10 minutes.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Ok, Let me try this and check this.

jeet.chaudhari said:
Ok, Let me try this and check this.
Click to expand...
Click to collapse
Unfortunately removing battery for 10 mins, in boot loop didnt help anything, Please help...!

Sir which state are u now?
Sent from my GT-N7000 using xda premium

adamskoc said:
Sir which state are u now?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Currently i am at a state where nothing is working, paranoid, anidroid, all seems like trouble, paranoid stucks at animation, anidroid dont go further than start boot screen.
may be only STOCK GB will be working now. trying that via odin.

The mistake u have done acording to your explanation on paranoid thread on 7 th step after flashing para v5 u again made a full wipe... try gb ... if success start from the beginning...
İf gb stucks on boot go to Recovery wipe cache and under advanced wipe dalvik...
Waiting ....
Sent from my GT-N7000 using xda premium

Any news?
Sent from my GT-N7000 using xda premium

jeet.chaudhari said:
Hi i flashed with PC odin after downloading stock rom from the link you gave, then i flashed Paranoid again, and later Gapps hybrid, but everytime i still stuck on the same oot animation.
I have even tried, full wipe means not only factory reset and cache wipe, but also format /data, format /system and and format /cache. but still no luck, stuck again.
I even have tried then darkside cache wipe 1st time, but not solved, then i also used darkside super wipe, but still no luck.
My phone is rooted, is there any other solution or anything that i am forgetting to do?
please help...!
Click to expand...
Click to collapse
Flash stock GingerBread rom from PC odin and root it . Else you can flash pre rooted GB roms like Checkrom, rocketrom etc etc etc from the whichever ICS rom you are currenntly on .This is how I flash Gingerbread rom from EMMC bug infected ICS rom , flash abyss kernel 3.9 and the reboot recovery into abyss kernel 3.9 and then wipe data , cache and dalvik cache and then flash CheckRom Revo HD V6 and reboot your phone.
Once your phone is successfully running GB rom with proper root and clockworkmod recovery , go to clockworkmod recovery and wipe data , cache , dalvik cache and flash paranoid android directly ( dont flash abyss kernel or any other kernel , GB rom with CF root kernel or whichever kernel the pre-rooted GB roms like checkrom and rocketrom come with ) , and finally after flashing wipe data , cache and dalvik cache . You will boot paranoid android properly .
I dont want you to brick your phone , so explained the whole process from gingerbread rom installation
---------- Post added at 09:45 PM ---------- Previous post was at 09:32 PM ----------
Download link for XXLC1_CheckROM_NoteHD_V6 :
http://checkrom.com/download/
Also download abyssnote kernel 3.9

Archangel919 said:
Flash stock GingerBread rom from PC odin and root it . Else you can flash pre rooted GB roms like Checkrom, rocketrom etc etc etc from the whichever ICS rom you are currenntly on .This is how I flash Gingerbread rom from EMMC bug infected ICS rom , flash abyss kernel 3.9 and the reboot recovery into abyss kernel 3.9 and then wipe data , cache and dalvik cache and then flash CheckRom Revo HD V6 and reboot your phone.
Once your phone is successfully running GB rom with proper root and clockworkmod recovery , go to clockworkmod recovery and wipe data , cache , dalvik cache and flash paranoid android directly ( dont flash abyss kernel or any other kernel , GB rom with CF root kernel or whichever kernel the pre-rooted GB roms like checkrom and rocketrom come with ) , and finally after flashing wipe data , cache and dalvik cache . You will boot paranoid android properly .
I dont want you to brick your phone , so explained the whole process from gingerbread rom installation
---------- Post added at 09:45 PM ---------- Previous post was at 09:32 PM ----------
Download link for XXLC1_CheckROM_NoteHD_V6 :
http://checkrom.com/download/
Also download abyssnote kernel 3.9
Click to expand...
Click to collapse
Really Thank You for your detailed Reply, But as you said I wastrying this all from STOCK GB Rom only which i rooted, But in paranoid one of senier member told me that, as i used darkside scripts and which are not made for Note, So I have screwed my partitions, and may be i will need to repartition with four filed STOCK ROM. because now the problem is even critical, when i flash, it stucks at SAmsung Note GT-N7000.
So really need to solve this issue 1st, so starting new thread now, for flashing Stock Rom with odin for repartition.

adamskoc said:
Any news?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sorry for late reply, i am currently on stock GB by the way u said. but still i am not able to use any custom rom.
As i mentioned in last post, may be i need to flash stock rom with repartitions, so now after searching and reading all posts and google i am starting new thread for this strange problem.
Still thank You for your help.

jeet.chaudhari said:
Really Thank You for your detailed Reply, But as you said I wastrying this all from STOCK GB Rom only which i rooted, But in paranoid one of senier member told me that, as i used darkside scripts and which are not made for Note, So I have screwed my partitions, and may be i will need to repartition with four filed STOCK ROM. because now the problem is even critical, when i flash, it stucks at SAmsung Note GT-N7000.
So really need to solve this issue 1st, so starting new thread now, for flashing Stock Rom with odin for repartition.
Click to expand...
Click to collapse
Well I will help you for sure , XDA's philosophy :good:. Well I want you to check whether you have EMMC brick bug in your kernel . Let me ask you sth , have you ever done a data wipe while on stock ICS roms ??? And dont worry my friend , i can help you reset your partitions as i have done this many times

Archangel919 said:
Well I will help you for sure , XDA's philosophy :good:. Well I want you to check whether you have EMMC brick bug in your kernel . Let me ask you sth , have you ever done a data wipe while on stock ICS roms ??? And dont worry my friend , i can help you reset your partitions as i have done this many times
Click to expand...
Click to collapse
Thanx Friend,
I have flashed b4 from stock ICS kernal to Anidroid ROM, but now that is not the real problem, now i am on stock GB Rom, which i have installed via Odin, Kindly check http://forum.xda-developers.com/showthread.php?t=1783625 this thread which i have just started, i hope you will understand my problem by looking to this thread, also as i am on GB kernal right now, without rooted, so still i dont need to afraid of EMMC brick bug (I assume it is problem with stock ICS kernals.).

And I had screwed my galaxy bote and had hard bricked my phone , it was gone mate , my phone had almost seem its last days , but i did save it and gave it a new life . Well here is what happened ( again in detail ) - I was KingDroid V2 rom , even when i knew all the ics roms at that time had emmc brick bug , I was fool enough to do a data wipe :crying: , and **** !!!! my phone did boot any rom , i was not even able to flash any rom , not even stock unrooted samsung roms via pc odin . I couldnt even get my phone into recovery mode !!!!!! The only thing that was working on my phone was the download mode !! Thank god !!!!:fingers-crossed: . I tried to re-partition using the original 16GB pit file( as i have 16GB Galaxy note N7000 ) but it was in vain. And then I read some post in XDA developers which mentioned how to RE-ARRANGE the partition.
[ Well I think you don't know what happens when you do a data wipe with emmc bug infected kernel ???? Right ? well here goes an explaination fro that , (i love explaining things to others :cyclops In simple words when you do a data wipe on an EMMC bug infected kernel a part of your internal SD card gets infected , I mean it becomes non-functional , it doesn't respond to read /write commands issued over that sector of internal SD ]
so out of my 16GB internal memory , memory sectors from 1049MB to 2200MB had got corrupted( found it by trial and error method ) , i couldn't use them anymore , so using the adb from the android platform tools , I edited the partitions and shifted the partition corresponding to 1049 MB to 2200MB, and then flashed abyss note kernel and then checkrom revo HD :fingers-crossed: . Viola my phone booted , I had got over the hard brick , but my internal storage had reduced to 10 Gb instead of 11 Gb due to unresponsive sectors in internal memory !!!
Next i did a reset of the flash counter and removed the yellow triangle and flashed the stock gingerbread rom (Indian version , where I am from ) via pc odin and it got stucj at FactoryFS stage , as expected !!!! . Next I handed it to Samsung service center and just told them that i was trying to update to ICS via kies and it got stuck . After few days they replaced my phone's motherboard for free :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:

My friend i think your prob started while flashing paranoid rom u said that after flashing rom u made a full wipe... so i think u lost your root... just an idea
İf u can find a prerooted gb rom or u can root your gb rom u can flash paranoid rom
Sent from my GT-N7000 using xda premium

Stuck mith mu GNote

Hi,
I' in trouble with my note. It stucks at samsung logo animation and i cant make it boot to ics anymore (i'm on stock 4.03 ics rom)
This is what happend : i played/bench beetween gl_notecore kernel v9.x/v10.x and chainfire 3D driver install/uninstall, all was fine and suddenly my phone freezed at ics homescreen after a soft reboot (OC or whatever make it freezed).
So i hard reboot it by pressing power button 10 sec, and now, it dont full boot anymore.
I tried to flashed many kernel through cwm onboard kernel stuff (notecore/speedmod..), tried wipe cache, tried to flash stock rom (N7000XXLQ3_N7000XXLPT_N7000XEFLP1_HOME.tar.md5) throught odin but result is same. Phone is indefinitly show samsung animation logo screen without finally boot into ics.
I dont know if chainfire 3d driver is the guilty one but fresh rom flash dont unbrick it ?
What's my solution now ? i didnt tried to full wipe before flashing stock rom and i'd prefer not. but...
thanks for your help :good:

To be on safe side i would try to flash a stock gb rom first then move to ics later. Flash gb stock from dr.ketan thread then go into recovery and wipe ....then it should boot.
Sent from my phone

Thanks for reply.
So i'm going to download a gb stock rom and wipe it from there if necessary.

Shuff said:
Thanks for reply.
So i'm going to download a gb stock rom and wipe it from there if necessary.
Click to expand...
Click to collapse
Download a GB Rom from here http://forum.xda-developers.com/showthread.php?t=1424997
Flash it using PC Odin. If your phone stuck at bootscreen logo or you face any issues do a Wipe by going to recovery mode. (GB Kernels are safe to Wipe)
Now Check whether the issue is still there or not.

Gb flashed successfully, and phone boot normally.
But GB soft reboot a lot. Seems flashing gb over ics without a wipe make a mess in the rom =)
Going to wipe and flash ics back.
Tanks a lot !

Shuff said:
Gb flashed successfully, and phone boot normally.
But GB soft reboot a lot. Seems flashing gb over ics without a wipe make a mess in the rom =)
Going to wipe and flash ics back.
Tanks a lot !
Click to expand...
Click to collapse
Remember not to WIPE on ICS Stock Kernel. When you want to flash on Stock ICS remember to flash a safe kernel first like notecore/hardcore/etc

No matter, i'm aware of MMC_CAP_ERASE brick of the death
I will do like i did before. flashing notecore kernel through odin and triangle away
Edit : oh wait.. and i'll never install chainfire 3d again

[Help Needed] Can

i really need help on those Root Gurus out there.
Android Version : 4.0.3
Baseband Version : N7000XXLPT
Kernel Version : 3.0.15-Franco Kernel [email protected] #5 SMP PREEMPT
Build Number : KingDroid NoteMania Edition V3.0
Click to expand...
Click to collapse
Okay heres the thing , I want to flash a new roms and I did the same old thing
Wipe data/Factory reset
Wipe cache partition
Go to advance screen and wipe dalvik cache
Install zip from sd card - > choose zip from sd card. Find your ROM in the extSDcard.
Flash the ROM and reboot system.
While flashing , it took so long to actually flash like 10mins or so and I give up and I did a hard reset.
Can anyone point to me where did I do wrong ?
And I'm trying to flash this
http://rootgalaxynote.com/galaxy-note-roms/tmt4-jelly-bean-rom-for-galaxy-note-gt-n7000/

Up this post .

Up.for.awareness

Just download Hydracore, go back to recovery and flash it... Then go advanced options and reboot recovery.. After that wipe everything again and flash the new rom... Stay away from franco kernel that's way outdated and doesn't work with anything
Tapatalking on my n7000

msedek said:
Just download Hydracore, go back to recovery and flash it... Then go advanced options and reboot recovery.. After that wipe everything again and flash the new rom... Stay away from franco kernel that's way outdated and doesn't work with anything
Tapatalking on my n7000
Click to expand...
Click to collapse
i tried flashing hydracore and it took for me 10mins plus at the screen and still at the same place.

you tried to flash hydracore, and its not installing ?
may be try to flash back the stock ICS using odin and then flash Philz kernel to gain root
.boot into recovery and go to mounts & storage.
format / sytem
format / data
then try to install your TMT rom

If TMT is installed, Or even part installed then it wont boot with Hydracore kernel, The main thing is just having the kernel installed cause its safe, So, In recovery (with Hydracore installed)
Do all the necessary wipes, Flash the ROM, Then flash the kernel (Philz kernel)
then it should boot
If not, follow the above post to revert back to stock ICS / GB with odin, and then start the whole procedure again :good:

[Q] URGENT My Note doesn't boot after flashing HydraCore v7

Hello guys, i have a Note on stock ICS 4.0.4 and i was using SpeedMod kernel untill a few minutes ago, but now i tried to flash HydraCore v7 Standard(From here https://www.dropbox.com/sh/tgt862w7t0dbbwf/wtCeOLxSsU/HydraCore 7 ) and after that my phone refuses to boot, it only gets to "Samsung Galaxy Note GT-N7000" screen but after that the screen just turns black and i need to remove the battery to try again or to go into CMW.
I tried to reflash the SpeedMod .zip but it doesn't work(The CMW version changes, but i still can't boot).
I'm a noob, brought my Note two months ago and i am an Android noob(Came from iOS).
Could someone here PLEASE help me?

Quimerinha said:
Hello guys, i have a Note on stock ICS 4.0.4 and i was using SpeedMod kernel untill a few minutes ago, but now i tried to flash HydraCore v7 Standard(From here https://www.dropbox.com/sh/tgt862w7t0dbbwf/wtCeOLxSsU/HydraCore 7 ) and after that my phone refuses to boot, it only gets to "Samsung Galaxy Note GT-N7000" screen but after that the screen just turns black and i need to remove the battery to try again or to go into CMW.
I tried to reflash the SpeedMod .zip but it doesn't work(The CMW version changes, but i still can't boot).
I'm a noob, brought my Note two months ago and i am an Android noob(Came from iOS).
Could someone here PLEASE help me?
Click to expand...
Click to collapse
Did you wipe cache and dalvik cache?
Next time read the threads for a new kernel or a new Custom Rom here in XDA and follow the installation instructions carefully. This reduces the chances of error dramatically.
But first try to clean the caches and reboot again.

Just wiped Dalvik Cache and Partition Cache but i still can't boot.

Quimerinha said:
Just wiped Dalvik Cache and Partition Cache but i still can't boot.
Click to expand...
Click to collapse
Please try the factoy reset.

As the poster before said: factory reset is a possibility.
But: only if you really sure you're using a recovery in a safe kernel. This should be from what you told before.
Another option I would try first:
So I would search for the Philz kernel for your ICS and install this first in CWM. Maybe you can boot with this into Android. If not this gives you a safe environment for factory reset or installing a new Rom

When you want revert from HydraCore v7 kernel you need to flash this:
http://forum.xda-developers.com/showpost.php?p=32806581&postcount=10783
After flashing this .zip, see if it boots properly, then you can try flash any other kernel that you want (speedmod, philz, or other version of HydraCore/Notecore)
Edit: oh I see this file isnt avilable anymore, so try this link:
https://docs.google.com/file/d/0B_a9lzwtDaN5VnNzME1YUWRKNVk/edit?usp=sharing

djoni_gitara said:
When you want revert from HydraCore v7 kernel you need to flash this:
http://forum.xda-developers.com/showpost.php?p=32806581&postcount=10783
After flashing this .zip, see if it boots properly, then you can try flash any other kernel that you want (speedmod, philz, or other version of HydraCore/Notecore)
Edit: oh I see this file isnt avilable anymore, so try this link:
https://docs.google.com/file/d/0B_a9lzwtDaN5VnNzME1YUWRKNVk/edit?usp=sharing
Click to expand...
Click to collapse
Thanks dude, you saved me!
Didn't need to do the factory resets, used this .zip and now i can boot. Think i will stay with that kernel for a while now Maybe later i get back to SpeedMod. But, anyway, thank you all for helping me out with this guys, I really appreciate it.