Database Develop

[Q] [I9001] Can't boot + flash (with ODIN)

Ok, now after i tried to flash the touch recovery thing, i can't boot into recovery mode and not into the normal android system...
I've flashed over 20 roms, so i'm quite experienced in flashing, and i already read every thread out therse with a similiar variant of this problem
ok, now a discription of the problem: once i try to normally boot it, it first shows the samsung logo, but then after +- 3 seconds, i get a logo with a phone, an exclaimation mark and a pc...
same goes for recovery..
i CAN however enter download mode, but i can't flash anything as this is what ODIN tells me:
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
i've waited over 1 hour to see if it went any further without luck though....
I hope anybody knows what i'm talking about and has a fix
Let's hope it isn't doomed...

`leon said:
I hope anybody knows what i'm talking about and has a fix Let's hope it isn't doomed...
Click to expand...
Click to collapse
Flash CWM 6.0 recovery, link below on MY Android Collection ,use Odin 4.43 with AriesVe.ops

still not flashing, but odin now gets stuck after setup connection
Code:
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...

`leon said:
still not flashing, but odin now gets stuck after setup connection
Click to expand...
Click to collapse
try reboot PC after a power plug disconnection and also reboot Phone after battery Pull.... change USB port to back of PC too
IF you have lap top use that to test

yeah, im on a laptop, trying now
edit, i ******* love you
worked after pc restart + port switch
thx

oops double post :s

turn off your mobile
then press the power+down+home buttons until the downloading mode appear
u should turn off then press the 3 buttons togrther

Thats exactly what you should do, when stuck during flashing via Odin:
- pull off your battery
- hold down power button till phone switches off
- disconnect USB cable
- insert battery again, restart your computer, switch off antivirus, firewall, any spyware blockers and guards you have.
- enter Download mode in your phone
- plug USB cable to different port
Cheers

divibyzero said:
Thats exactly what you should do, when stuck during flashing via Odin:
- pull off your battery
- hold down power button till phone switches off
- disconnect USB cable
- insert battery again, restart your computer, switch off antivirus, firewall, any spyware blockers and guards you have.
- enter Download mode in your phone
- plug USB cable to different port
Cheers
Click to expand...
Click to collapse
And dont forget to switch off Kies and remove it from autostart.
Sent from my GT-I9001 using xda app-developers app

`leon said:
yeah, im on a laptop, trying now
edit, i ******* love you
worked after pc restart + port switch
thx
Click to expand...
Click to collapse
Hey `leon,
can you please edit your header and add SOLVED, so that readers will stop giving you more advice and continue this thread . :laugh:

xsenman said:
Hey `leon,
can you please edit your header and add SOLVED, so that readers will stop giving you more advice and continue this thread . :laugh:
Click to expand...
Click to collapse
Yeah, yeah. Just tried to be helpful

[Q] Ace S5830 Brick after CWM

After unsuccessful flashing CWM I got a bad brick... Can't enter download mode. Screen is always black.
Tried:
1. Volume Down + Power + Home. Result: PC will not detect COM port and screen is black.
2. Volume Up + Power + Home. Reulst: PC will detect Samsung Mobile modem diagnostics serial port. Tried to flash anything(Ona package or split PHONE, PDA, CSC, but it will simply not flash although the timer counter increments.
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
Stuck on that.
No warranty for this phone so I can't get it fix ordinary way.

Can you get in recovery mode?
Sent from my GT-I5800 using xda app-developers app

jumper62 said:
Can you get in recovery mode?
Click to expand...
Click to collapse
If VolumeUP+Power+Home is how to enter then yes. But there is nothing on screen and I am not sure how to check if phone is in recovery mode or not.

Also tried USB jig with 300K between 4&5 pins, no download mode...

peter-kim said:
After unsuccessful flashing CWM I got a bad brick... Can't enter download mode. Screen is always black.
Tried:
1. Volume Down + Power + Home. Result: PC will not detect COM port and screen is black.
2. Volume Up + Power + Home. Reulst: PC will detect Samsung Mobile modem diagnostics serial port. Tried to flash anything(Ona package or split PHONE, PDA, CSC, but it will simply not flash although the timer counter increments.
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
Stuck on that.
No warranty for this phone so I can't get it fix ordinary way.
Click to expand...
Click to collapse
SAME HAPPENED TO ME!
Setup ODIN and remember you have to close kies from task manager, then when odin is ready go to download mode from mobile and connect to PC! you'll get a yellow box on odin....Then start ODIN and let it do its work!
REMEMBER you have to select a working stock firmware from a known site like SAMDROID.com
your device stucks at "setup connection" bcuz of KIES!!!
Press thanks if i helped

saadistan said:
SAME HAPPENED TO ME!
Setup ODIN and remember you have to close kies from task manager, then when odin is ready go to download mode from mobile and connect to PC! you'll get a yellow box on odin....Then start ODIN and let it do its work!
REMEMBER you have to select a working stock firmware from a known site like SAMDROID.com
your device stucks at "setup connection" bcuz of KIES!!!
Press thanks if i helped
Click to expand...
Click to collapse
Like I said, I am not able go to download mode, looks like the boot area is erased.
On the PC where Odin is installed I don't have Kies.

peter-kim said:
Like I said, I am not able go to download mode, looks like the boot area is erased.
On the PC where Odin is installed I don't have Kies.
Click to expand...
Click to collapse
Well you should try to install kies, because it comes with galaxy ace's usb drivers, maybe drivers are the problem! Hope it helps!

Or if you dont have Kies, Install drivers needed for your phone, then connect to your pc, Start Odin and Flash Rom and if you can get to CWM mode with Blue and White text, then just download any rom and flash it, it will solve the prob

Mobile doesn't react at all, but Download-Modus works.

Hey, I really need your help.
Today I tried to install new Custom ROM (MIU or something).
I installed it normaly and rebooted. I didn't watch what the mobile is doing in that moments and when I took a look at it it was turned off.
The problem now is that it doesn't react at all.
I managed to put it in the download modus. Pressing the buttons and turn in the battery then. It connects via USB but it does show nothing on the display.
The next step then was to flash it completely new with ODIN.
But ODIN just stops at setup connection:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
Once I got the error messages:
<1> --- cannot open the usb serial port. code: 87
and
<1> --- cannot open the usb serial port. code: 2
Can you please please help me get it going!!!
Greetings,
Your Dematik

Dematik said:
Hey, I really need your help.
Today I tried to install new Custom ROM (MIU or something).
I installed it normaly and rebooted. I didn't watch what the mobile is doing in that moments and when I took a look at it it was turned off.
The problem now is that it doesn't react at all.
I managed to put it in the download modus. Pressing the buttons and turn in the battery then. It connects via USB but it does show nothing on the display.
The next step then was to flash it completely new with ODIN.
But ODIN just stops at setup connection:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
Once I got the error messages:
<1> --- cannot open the usb serial port. code: 87
and
<1> --- cannot open the usb serial port. code: 2
Can you please please help me get it going!!!
Greetings,
Your Dematik
Click to expand...
Click to collapse
Hi Dematik!
You can read about similar issues here (unsolved)
or here or this or this
It looks bad, but...
Good luck anyway.

Hey, thanks for your effort.
I think I pressed Volume UP + Home + Power. This is the RAMdump Mode isn't it?
If I'm correct it isn't useful to recover my mobile?
Thank again.

Dematik said:
Hey, thanks for your effort.
I think I pressed Volume UP + Home + Power. This is the RAMdump Mode isn't it?
If I'm correct it isn't useful to recover my mobile?
Thank again.
Click to expand...
Click to collapse
Hello Dematik!
You enter in recovery mode when you press just 2 buttons: Home + Power.
You're welcome.
Good luck.

Well I'd suggest you to try the "POWER + HOME + VOLUME DOWN" combo instead of the one you tried, because they are different. If a yellow "downloading..." appears in the middle of a black screen you are in the right downloading mode that should work with odin, just talking from my experiences

Or If you can open CWM, then just flash another Rom if not Odin is your last choice

If you are getting an error of cannot connect to the serial port, reinstall the drivers and flash via Odin.
Press that damn thanks button even if I didn't help you. I just love to earn more of them

Hel please

Hi everybody ! First of all, i'm sorry for my poor english. I have a Samsung Galaxy Mini S5570, whit Android 2.3.6. Yesterday the phone works ok almost all day, but in the evening it shut down. I try to turn it on, and it appers on the screen the Galaxy Logo and that's all. I enter in the recovery mode and try to do a wipe data\factory reset but the result is the same. I have an error it sound like this: rfs for at failed on /dev/stl13 and /dev/stl14. What can i do ? I am a begginer at Android and i don't know very more. Please help me, step by step, to do something whith my phone, and fix it. Thank you everybody.

is the first time i've heard this problem. try to check some solution

danyhhh said:
Hi everybody ! First of all, I'm sorry for my poor English. I have a Samsung Galaxy Mini S5570, whit Android 2.3.6. Yesterday the phone works ok almost all day, but in the evening it shut down. I try to turn it on, and it appears on the screen the Galaxy Logo and that's all. I enter in the recovery mode and try to do a wipe data\factory reset but the result is the same. I have an error it sound like this: rfs for at failed on /dev/stl13 and /dev/stl14. What can i do ? I am a beginner at Android and i don't know very more. Please help me, step by step, to do something whith my phone, and fix it. Thank you everybody.
Click to expand...
Click to collapse
reflash a the rom via Odin. then wipe data and cache via recovery.
should work. seems that your system partition and data is corrupted.
where did you see the error logcat...?

Dark Passenger said:
reflash a the rom via Odin. then wipe data and cache via recovery.
should work. seems that your system partition and data is corrupted.
where did you see the error logcat...?
Click to expand...
Click to collapse
When i enter into the Recovery mode and try to do wipe.

danyhhh said:
When i enter into the Recovery mode and try to do wipe.
Click to expand...
Click to collapse
try to flash 4 files(modem,code,csc,apboot) through odin,not one package file,,

taran181 said:
try to flash 4 files(modem,code,csc,apboot) through odin,not one package file,,
Click to expand...
Click to collapse
I try to flash all that 4 files and doesen't work.
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
And stop. Any ideas ?

danyhhh said:
I try to flash all that 4 files and doesen't work.
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
And stop. Any ideas ?
Click to expand...
Click to collapse
did u place the files at correct place..??see this tutorial to flash four files and flash below firmware http://androidflip.com/how-to-flash-install-firmware-samsung-galaxy-mini-s5570/
http://hotfile.com/dl/145759054/6b0ffaf/S5570DDKA7_ODDKA7_DDKA7.zip.html
try this firmware if still nothing happens than i have no idea,,

[Q]Hard brick

Hello to everyone! First, sorry for my bad english.
I have a big problem, a few days ago i flashed new ROM and kernel to my Galaxy Mini, from this moment phone is dead.. Phone can't be flashed to recovery, download mode, or anything else. I buyed Jig USB and this don't work (screen is always black with no backlight).. and i have question from this moment, i really must buy JTAG box? It's unprofitable, better choice is buy new phone...
Odin no detect phone on Vol Down + Home + Pwr Button, odin only detect phone on Vol Up + Home + Pwr Button and i have problem again
Code:
<1> Added!!!
<1> Detected!!!
Check MD5 FileName...
MD5 File Name : S5570XWKTH_S5570XWKT4_S5570PLSKT1_HOME.tar
Open File Name : S5570XWKTH_S5570XWKT4_S5570PLSKT1_HOME.tar
Check MD5 ...
Tail MD5 : 148B0F4EFAAB270CBC1A9CC065BA6AAA
Image MD5 : 148B0F4EFAAB270CBC1A9CC065BA6AAA
Check MD5 ... ok
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
I'm waiting from ~2 hours, no reaction.. What can i do, phone must go to the trash?

Wtf, be happy that it died... it's 2016 and some people still have galaxy mini... even the trash would reject it...