Hi all,
I have been browsing this site since last November, when i bought my Note.
I has a very basic understanding of phone software.
I am trying to upgrade to 4.0.4 but so far without success. OTA nor Kies works for me. OTA just says failed, try Kies. Kies says failed and goes into emergency recovery and fails that too. The phone still works fine.
I would like some simple instructions on how to get 4.0.4 on a phone which has the eMMC bug on it. I dont want to root, factory wipe or anything; just to go from 4.0.3 to 4.0.4.
I have read the guides but they are way too complicated for me. Normally i get my head round things but i cant on this one.
Failing this, can i just take my phone to any Vodafone shop and get them to do it?
Thanks in advance for any help.
Get odin and download from sammobile any gingerbread rom also any 4.0.4 rom...
While downloading backup your photos/ document /music/videos etc in your pc
Make sure kies is not running and unzip the Gingerbread rom you just downloaded...
Open odin press PDA and put there the file you just unzipped..
Do not touch the default check boxes options
PRE ODIN STEP(In your phone wich should not be connected to the pc (must have over 50% battery) press volume down+home+power until it reboots to odin mode (accept the warning with volume up))
ODIN STEP(Now connect it to the pc and you should see a yellow rectangle in Odin indicating that the phone its okay to go... Press start and wait until it finishes..) when the process finish close odin
FINAL STEP NOT FOR 4.0.4(Once finished unplug the phone from the pc and press volume up+home +power to get to recovery and wipe data then reboot..)
Unzip the 4.0.4 rom go to odin press PDA and select the file you just unzipped and repeat PRE ODIN STEP AND ODIN STEP... AND FOR TE LOVE OF GOD... DO NOT DO THE FINAL STEP ONCE YOU FINISH THE ODIN STEP WHEN FLASHING THE 4.0.4 ROM (if you perform the final step when fishined the Odin step you could brick your phone)
That's it and cheers
Do not go to Vodafone stores if you don't want to end up with a paperweight lol
Enviado desde mi LG-P990 usando Tapatalk 2
msedek said:
Get odin and download from sammobile any gingerbread rom also any 4.0.4 rom...
While downloading backup your photos/ document /music/videos etc in your pc
Make sure kies is not running and unzip the Gingerbread rom you just downloaded...
Open odin press PDA and put there the file you just unzipped..
Do not touch the default check boxes options
PRE ODIN STEP(In your phone wich should not be connected to the pc (must have over 50% battery) press volume down+home+power until it reboots to odin mode (accept the warning with volume up))
ODIN STEP(Now connect it to the pc and you should see a yellow rectangle in Odin indicating that the phone its okay to go... Press start and wait until it finishes..) when the process finish close odin
FINAL STEP NOT FOR 4.0.4(Once finished unplug the phone from the pc and press volume up+home +power to get to recovery and wipe data then reboot..)
Unzip the 4.0.4 rom go to odin press PDA and select the file you just unzipped and repeat PRE ODIN STEP AND ODIN STEP... AND FOR TE LOVE OF GOD... DO NOT DO THE FINAL STEP ONCE YOU FINISH THE ODIN STEP WHEN FLASHING THE 4.0.4 ROM (if you perform the final step when fishined the Odin step you could brick your phone)
That's it and cheers
Do not go to Vodafone stores if you don't want to end up with a paperweight lol
Enviado desde mi LG-P990 usando Tapatalk 2
Click to expand...
Click to collapse
Why not perform ALL 3 wipes when on GB??then move on to ICS?Why just wipe data?
galaxynotes said:
Why not perform ALL 3 wipes when on GB??then move on to ICS?Why just wipe data?
Click to expand...
Click to collapse
Why need to go back to GB just to perform all 3 wipes, when he's alrd on ICS 4.0.3 and he doesn't need any wiping at all.
VR4Note, just use PC ODIN.
you may download the tools and the firmware directly from samfirmware.com
like ms edek says, is easiest. But backup efs before that, cause I see to many losing service or updatability because of efs corruption. See dr ketans toolbox thread in general section.
preconditions for update ota/kies
No root(ota it doesnt matter)
All codes intact (imei, pcode)
All components installed of same rom and version of rom that was distributed through Kies or ota.
Rom csc must match the installed rom. Most updates arent available because for phone csc there is no update. This is the csc obtainable throught dialing *#06# for imei then dial *#272*yourimeihere#. Note changing csc triggers factory reset, so do from save kernel should you like to change.
Sent from my GT-N7000 using Tapatalk 2
galaxynotes said:
Why not perform ALL 3 wipes when on GB??then move on to ICS?Why just wipe data?
Click to expand...
Click to collapse
In stock recovery you can not do those wipes and when you perform a factory reset it does wipes cache...
Doing this will allow him to boot into gingerbread with a clean free of issues rom
antique_sonic said:
Why need to go back to GB just to perform all 3 wipes, when he's alrd on ICS 4.0.3 and he doesn't need any wiping at all.
VR4Note, just use PC ODIN.
you may download the tools and the firmware directly from samfirmware.com
Click to expand...
Click to collapse
You don't know what issues does he have.. He's not able to upgrade either by ota ir kies.. So it's better to wipe and start fresh.. He can not wipe in stock 4.0.3 nor 4.0.4...
Before trying to be an smart a$$ analyze the situations...
Enviado desde mi LG-P990 usando Tapatalk 2
Thank you msedek for laying it out in a way that is helpful.
Some one mentioned beacking up 'efs'. What does that mean?
Btw, my phone will brick if i do a factory wipe so i am limited in my choice here.
Will have to bite the bullet and try this ODIN method.
VR4Note said:
Thank you msedek for laying it out in a way that is helpful.
Some one mentioned beacking up 'efs'. What does that mean?
Btw, my phone will brick if i do a factory wipe so i am limited in my choice here.
Will have to bite the bullet and try this ODIN method.
Click to expand...
Click to collapse
Efs is the partition where all the imei/carrier/phone number details are stored.you can take backup with ktool. Download it from playstore. Its free..
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
Where do i get this Odin from? I looked on Google Store and there is one for around £3 or so by Chainfire that specifies rooted phones.
I take it i need to install Odin on the pc and on the phone?
VR4Note said:
Where do i get this Odin from? I looked on Google Store and there is one for around £3 or so by Chainfire that specifies rooted phones.
I take it i need to install Odin on the pc and on the phone?
Click to expand...
Click to collapse
http://www.mediafire.com/?60g52sdy9t2mgya
Cheers
Either PC or phone.
Phone only for rooted devices
Sent from my GT-N7000 using Xparent SkyBlue Tapatalk 2
Related
Hi,
I came from an LG 2x, so I thought rooting my device in order to have some extra authorizations was no big deal. I first tried with pc software Unlockroot, but it failed in the process.
Being my GB 236 Note quite dirty I wanted to do some extra backup and cleanup. So I googled and stopped at rootyourgalaxynote.com, I tried the first ROOT method, not working, I tried the second method with pc ODIN 3.04 and abyss kernel 42, ODIN says it worked, note reboots but it stops at Samsung galaxy Note Gt-N7000 with yellow triangle. shocked, I didnt really expect that! After reading a little bit else, I went to sammobile downloaded italian gb 236 stock (the version I had befor kernel flashing) and tried to flash with PC Odin. It Failed. Device still gets in download mode. But now I'm seriously worried. What can I do?
[UPDATE]: I tried using Odin 1.85 and the same gb 236 stock rom but it stops half the factoryfs.img flashing...please explain me what's happening. I don't really want to bring it in assistance and lose my warranty
strangermyself said:
Hi,
I came from an LG 2x, so I thought rooting my device in order to have some extra authorizations was no big deal. I first tried with pc software Unlockroot, but it failed in the process.
Being my GB 236 Note quite dirty I wanted to do some extra backup and cleanup. So I googled and stopped at rootyourgalaxynote.com, I tried the first ROOT method, not working, I tried the second method with pc ODIN 3.04 and abyss kernel 42, ODIN says it worked, note reboots but it stops at Samsung galaxy Note Gt-N7000 with yellow triangle. shocked, I didnt really expect that! After reading a little bit else, I went to sammobile downloaded italian gb 236 stock (the version I had befor kernel flashing) and tried to flash with PC Odin. It Failed. Device still gets in download mode. But now I'm seriously worried. What can I do?
[UPDATE]: I tried using Odin 1.85 and the same gb 236 stock rom but it stops half the factoryfs.img flashing...please explain me what's happening. I don't really want to bring it in assistance and lose my warranty
Click to expand...
Click to collapse
First you should t have flash abyss through odin since now you are not rooted and do t have the warranty too, the counter of flashes increased to 1 (look at the download mode small text), for rooting you can use chainfire's tool (in the cf-root kernel thread look for it in devolepment section) next get a stock rooted kernel and flash using the tool (read instructions).
For now use pc odin 1.87 and get a firmware 2.3.6 use the pc odin select the file on PDA and flash it, make sure phone is charged 100% and press start, if it doesn't work then uninstall drivers, reboot machine, reinstall them and kill kies process if present in task manager and then goto download mode connect USB and open pc odin wait for the port to be ready aka green and select file then start.... you should be fine its a soft brick afterall.
Sent from my GT-N7000 using Tapatalk 2
Yeah I know atm I don't have system nor root nor warranty.
I tried odin 1.87 with the stock rom from sammobile but at one point or another is it cache.img or factoryfs.img, it fails (I also uninstalled kies and drivers and reinstalled them, i also tried installing only drivers, for at&at note, but it doesn't let me). I'm gonna download another stock rom, I just hope in some way I soon solve the thing, given that I also don't know how much charge is left and if the phone still gets charged. it just displays an idle circle near an empty battery when connected to pc or A\C cable.
strangermyself said:
Yeah I know atm I don't have system nor root nor warranty.
I tried odin 1.87 with the stock rom from sammobile but at one point or another is it cache.img or factoryfs.img, it fails (I also uninstalled kies and drivers and reinstalled them, i also tried installing only drivers, for at&at note, but it doesn't let me). I'm gonna download another stock rom, I just hope in some way I soon solve the thing, given that I also don't know how much charge is left and if the phone still gets charged. it just displays an idle circle near an empty battery when connected to pc or A\C cable.
Click to expand...
Click to collapse
When connected to charger make sure phone is off the battery meter will show as soon as you connect, case it doesnt leave it for like 3 hours is fine... next about that ROM redownload. The package cleanup you temp directories in PC and try again if still goto recovery abyss I guess? Wipe everything and use the mount option and format partitions I would recommed you to have repartition but I dont have the file you can look for ot in forum its. PIT file download fireup odin select it in PIT section and see if repartitioning is shocked, of so select firmware as PDA and flash again.
Sent from my GT-N7000 using Tapatalk 2
REVERSiN said:
... if still goto recovery abyss I guess? Wipe everything and use the mount option and format partitions I would recommed you to have repartition but I dont have the file you can look for ot in forum its. PIT file download fireup odin select it in PIT section and see if repartitioning is shocked, of so select firmware as PDA and flash again.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thx for your prompt answer, but I really didn't catch this part, if it still fails I must go in recovery and wipe cache and dalvik cache?I don't have CWM installed as rooting was the first flashing I tried on NOTE, so I don't have recovery installed. Since it stopped in the middle of flashing factoryfs.img, my Note is now displaying sth like 'updrading went wrong, try recovery mode in Kies': can it help in anyway? The PIT file and procedure are the same that are used for the EMMC bug?
strangermyself said:
[UPDATE]: I tried using Odin 1.85 and the same gb 236 stock rom but it stops half the factoryfs.img flashing...please explain me what's happening. I don't really want to bring it in assistance and lose my warranty
Click to expand...
Click to collapse
If you are stcuk at factoyfs.img I think you have got a super Brick
use this link and follow the instructions given.. Worked for me
http://forum.xda-developers.com/showthread.php?t=1682444
Whiskeyjack4855 said:
If you are stcuk at factoyfs.img I think you have got a super Brick
use this link and follow the instructions given.. Worked for me
http://forum.xda-developers.com/showthread.php?t=1682444
Click to expand...
Click to collapse
Dude its a GB rom not superbrick bug in it and he didn't mention LPY yet.
Sent from my GT-N7000 using Tapatalk 2
strangermyself said:
Thx for your prompt answer, but I really didn't catch this part, if it still fails I must go in recovery and wipe cache and dalvik cache?I don't have CWM installed as rooting was the first flashing I tried on NOTE, so I don't have recovery installed. Since it stopped in the middle of flashing factoryfs.img, my Note is now displaying sth like 'updrading went wrong, try recovery mode in Kies': can it help in anyway? The PIT file and procedure are the same that are used for the EMMC bug?
Click to expand...
Click to collapse
Sorry for tea doubled post its a dumb app X's
You wipe using the CWM file in the Iss root section, and a normal recovery wipe would do too (aka restore defaults)
Sent from my GT-N7000 using Tapatalk 2
Hi REVERSIN,
Thx. I was starting to fear it could be sth more than a soft brick. Can the initial use of unlockroot have caused anything (at least a week ago, Note still working after that)?
Sorry but I really can't understand what procedure should I follow since these initial attempts at flashing stocks failed. Should I try to flash CWM? What is the ISS root section (is it in the forum)? Where can i do a normal recovery wipe from? CWM I guess..
THX for your help
strangermyself said:
Hi REVERSIN,
Thx. I was starting to fear it could be sth more than a soft brick. Can the initial use of unlockroot have caused anything (at least a week ago, Note still working after that)?
Sorry but I really can't understand what procedure should I follow since these initial attempts at flashing stocks failed. Should I try to flash CWM? What is the ISS root section (is it in the forum)? Where can i do a normal recovery wipe from? CWM I guess..
THX for your help
Click to expand...
Click to collapse
If you have the stock recovery, restore default wipes everything.
If you have stock re every and want CWM temporary just to wipe goto n7000 devolepment and check how to root by dr.ketan and get files there
If you have CWM then wipe data, wipe cache, wipe dalvik.... and try. Old download another firmware like kk5.... something else not the new LC1 LX1 releases.... (Latest GB) get an old one to get root easly
Sent from my GT-N7000 using Tapatalk 2
Hello!
First of all I've searched all the posts about this problem.. and personally I can't fix it.
So here is what I've done to brick my Galaxy Note GT-N7000 (I think that's called a non-usable device).
Installed few ROMs and finally after taking some decisions I've returned back on ICS 4.0.3 (Flashed with ODIN 1.85).
Restored EFS with kTool (because ClearNotev5 did something wrong with my phone.. and discovered after few hours that I can restore EFS).
Updated ICS 4.0.3 to 4.0.4 using WIFI (OTA I think it's called) and BANG after restart phone stucked at Bootscreen.
So from yesterday untill now I've restored my phone to factory settings few times(GB 2.3.5 & 2.3.6/ICS 4.0.4),repartitioned with .pit files for N7000 16GB,installed different custom/stock ROMs and nothing.
I've discovered few minutes ago while triyng to make a factory restore (GB 2.3.5) that my phone stucked at data.img... I've read about this and it is said that I must change my N7000 motherboard.. I have no warranty so please help.. and sorry for my bad english
Read many times about ota harbrick, i think its not advisable to use ota for upgrade. Sorry for your loss.
Flash gb in pc odin, if sucessfull and still stuck in logo go to CWMR and perform 3 wipes. This is all advise i can give you.
And try different gb rom.
allexsava said:
So from yesterday untill now I've restored my phone to factory settings few times(GB 2.3.5 & 2.3.6/ICS 4.0.4),repartitioned with .pit files for N7000 16GB,installed different custom/stock ROMs and nothing.
I've discovered few minutes ago while triyng to make a factory restore (GB 2.3.5) that my phone stucked at data.img...
Click to expand...
Click to collapse
^^
I think you had already tried the recovery method from a bricked device. So if you still facing problems you have to change the MB.
OTA Brick or Soft Brick?
I still haven't fix it but here is what I want:
Can someone give me different versions of GB (I've tried only one with CSC,MODEM but this now stops at data.img..) :crying:
I have to make a repartition to my phone? Will that help?
And can someone guide me through a tutorial step by step on how to revive my phone from EMMC Bug..?
PS: When I try to wipe data in CWM (using Hydracore Kernel v2.0b STD) with ICS 4.0.4 (Stock) my N7000 stucks,same for installing CleaNotev5.0 (stucks at Extracting\System).. But what is curios is that, I can clear Dalvik Cache and Cache, I can install Kernels and run N7000 in DOWNLOAD/CWM or stock Restore mode.
Any solutions?Please help..
allexsava said:
I still haven't fix it but here is what I want:
Can someone give me different versions of GB (I've tried only one with CSC,MODEM but this now stops at data.img..) :crying:
I have to make a repartition to my phone? Will that help?
And can someone guide me through a tutorial step by step on how to revive my phone from EMMC Bug..?
PS: When I try to wipe data in CWM (using Hydracore Kernel v2.0b STD) with ICS 4.0.4 (Stock) my N7000 stucks,same for installing CleaNotev5.0 (stucks at Extracting\System).. But what is curios is that, I can clear Dalvik Cache and Cache, I can install Kernels and run N7000 in DOWNLOAD/CWM or stock Restore mode.
Any solutions?Please help..
Click to expand...
Click to collapse
You can try the post here :
http://forum.xda-developers.com/showthread.php?t=1667886&highlight=emmc
Just follow the step there.
I've experienced before, and revive it using this method. So far mine still work well, and no further error ever since.
You will loose certain GB on your internal storage. Which for me it's not a big deal. I'm kinda lazy to go to samsung repair center, unless my phone is totally dead.
Here is my step (follow at your own risk) :
1. You have to know first your N7000 is the 16GB or 32GB, and then you download the correct pit for your phone.
2. After you download, extract the zip file.
3. Since mine is the 16GB, I've picked this pit file to use (inside the zip) : Q1_20110914_16GB-patched-regain-0102400-kB.pit (the pit file will be vary depending on which sector your phone brick)
4. Put your phone on to download mode.
5. Open ODIN PC and connect your phone, and wait till ODIN say "Added" and you see that your phone has connected.
6. Put the patch pit file I choose, then put the samsung stock rom as the PDA (if you downloaded 1 file only for the stock ROM, if not, put properly for the PDA, Phone, and CSC).
7. Check ON the "repartition", "Auto-reboot", "F-reset time"
8. Click Start, and wait till the process has finished. Your phone should auto reboot by then.
9. My phone has recovered, and I lost 1GB internal storage.
One last thing, try not to do wipe on ICS, unless you are on a safe kernel like speedmod / GLNotecore.
For Hydracore (You may check with the developer), I haven't tested it yet for wiping. But for those speedmod and GLNotecore, is confirm safe kernel. I've tried these 2 for wiping.
PS : if you are not sure with my step on reviving with the pit file, I suggest you to read the link above from the OP for the pit revive method.
Good Luck !
antique_sonic said:
You can try the post here :
http://forum.xda-developers.com/showthread.php?t=1667886&highlight=emmc
Just follow the step there.
I've experienced before, and revive it using this method. So far mine still work well, and no further error ever since.
You will loose certain GB on your internal storage. Which for me it's not a big deal. I'm kinda lazy to go to samsung repair center, unless my phone is totally dead.
Here is my step (follow at your own risk) :
1. You have to know first your N7000 is the 16GB or 32GB, and then you download the correct pit for your phone.
2. After you download, extract the zip file.
3. Since mine is the 16GB, I've picked this pit file to use (inside the zip) : Q1_20110914_16GB-patched-regain-0102400-kB.pit (the pit file will be vary depending on which sector your phone brick)
4. Put your phone on to download mode.
5. Open ODIN PC and connect your phone, and wait till ODIN say "Added" and you see that your phone has connected.
6. Put the patch pit file I choose, then put the samsung stock rom as the PDA (if you downloaded 1 file only for the stock ROM, if not, put properly for the PDA, Phone, and CSC).
7. Check ON the "repartition", "Auto-reboot", "F-reset time"
8. Click Start, and wait till the process has finished. Your phone should auto reboot by then.
9. My phone has recovered, and I lost 1GB internal storage.
One last thing, try not to do wipe on ICS, unless you are on a safe kernel like speedmod / GLNotecore.
For Hydracore (You may check with the developer), I haven't tested it yet for wiping. But for those speedmod and GLNotecore, is confirm safe kernel. I've tried these 2 for wiping.
PS : if you are not sure with my step on reviving with the pit file, I suggest you to read the link above from the OP for the pit revive method.
Good Luck !
Click to expand...
Click to collapse
Thank you for this magnific guide but.. I got one question? How do I know wich sector on my phone is bricked? Is there a tool to flash or something? Can you simplify for me because here(http://forum.xda-developers.com/show...highlight=emmc) it's to complicated for me
Find your gb rom here. http://forum.xda-developers.com/showthread.php?t=1424997
No more option left, for mmc cap erase brick, go here. Pls read carefully. http://forum.xda-developers.com/showthread.php?t=1667886
I've got a problem: I am from Romania and all GB's from Romania are on COSMOSTE and VODAFONE but I'm on ORANGE..Is there a problem to install a VODAFONE/COSMOTE GB?
allexsava said:
I've got a problem: I am from Romania and all GB's from Romania are on COSMOSTE and VODAFONE but I'm on ORANGE..Is there a problem to install a VODAFONE/COSMOTE GB?
Click to expand...
Click to collapse
No problem. Just pick any gb rom, one problem at a time, your problem now is how your phone can boot up.
If you want go to www.sammobile.com and pick your specific rom.
I've downloaded the COSMOTE GB ROM and I will flash it with PC ODIN.
After that I need as I was saying few posts ago how to identify which part of my internal storage is bricked..but a simplified method/guide please.. and sorry for my requests but believe me I'm kinda desperate..
allexsava said:
I've downloaded the COSMOTE GB ROM and I will flash it with PC ODIN.
After that I need as I was saying few posts ago how to identify which part of my internal storage is bricked..but a simplified method/guide please.. and sorry for my requests but believe me I'm kinda desperate..
Click to expand...
Click to collapse
You may refer to this post.
http://forum.xda-developers.com/showthread.php?t=1823918
The OP stated very clear on how to get the part of your bricked storage.
After emmc_find_brick_start.zip I get stucked on:
scanning 1167 Mib = 1224 MB ... (picture below)
And now I am waiting emmc_find_brick_end.zip to get stuck
LE: emmc_find_brick_end.zip stuck at:
scanning 3356 MiB = 3520 MB ... (picture below)
allexsava said:
I've got a problem: I am from Romania and all GB's from Romania are on COSMOSTE and VODAFONE but I'm on ORANGE..Is there a problem to install a VODAFONE/COSMOTE GB?
Click to expand...
Click to collapse
Shouldn't be a problem. However, best to root current, then efs backup multiple locations. See dr ketans toolbox thread on how.
Your phones csc is also Romania? Best to stick with your phones csc and those country roms if you want to continue ota/kies updatability in the future Dial *#06# for emei and then *#272*yourimeihere# to find out 3 letter csc.
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
Shouldn't be a problem. However, best to root current, then efs backup multiple locations. See dr ketans toolbox thread on how.
Your phones csc is also Romania? Best to stick with your phones csc and those country roms if you want to continue ota/kies updatability in the future Dial *#06# for emei and then *#272*yourimeihere# to find out 3 letter csc.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
If I can boot up my phone I'll consider your reply
allexsava said:
If I can boot up my phone I'll consider your reply
Click to expand...
Click to collapse
goodluck booting!
Sent from my GT-N7000 using Tapatalk 2
SOLVED
:fingers-crossed: Sorry for late response guys but yeah I've fixed it by patching the right .pit file and got only 8,83 GB internal memory.. Flashing CriskeloRomNOTE.vICS-V11.2 and HydraCore v3.5 STD.. I've got few problems with ROM, suddenly stuck in different situations but again yeah.. I'm happy I didn't changed my MB ..if someone got some ideas why it stucks please reply
At least you dont have to pay for mobo which is 200 dollars.
Sent from my GT-N7000 using xda premium
if you get succesful flash of gb then stay on it don't upgrade to ics.. "something is better then nothing"
Sent from my GT-N7000 using Tapatalk 2
Thank you all for the support
Sent from my GT-N7000 using xda premium
Hi and sry if my post is like many others, but i need strait answers for my particular software version.
So i am running Galaxy Note N7000 is rooted and unlocked with Galaxy_S Unlock apk i think (was locked on SRF France)
Android Version :2.3.6
Baseband version :N7000BUKK1
Kernel version : 2.6.35.7-N7000XXKKA-CL726566
[email protected] #2
Build number :GINGERBREAD.XXKKA
My question is:
Can i upgrade the software from the phone menu Software Upgrade? it is always asking me if i want to install or not.
Can i brick my phone using this method?
If i manage to get ICS on the device will i still be able to use unlock .apk on 4.0.x ?
I use vodafone romania sim
Should i use Odin or Kies or phone upgrade from menu?
Ihave downloaded all the stock roms for my country and carrier (Vodafone)
BTW mobile odin said there is something wrong with my partition, and emmc check will leave black screen and crash after a few seconds (is this something to be worried?)
What method do you guys recommend ?
Thanx in advance !
bustard83 said:
Should i use Odin or Kies or phone upgrade from menu?
Ihave downloaded all the stock roms for my country and carrier (Vodafone)
Click to expand...
Click to collapse
from the phone it becomes OTA and lot of chances that the phone gets screwed up
BTW mobile odin said there is something wrong with my partition, and emmc check will leave black screen and crash after a few seconds (is this something to be worried?)
Click to expand...
Click to collapse
if emmc check crashes or hangs that means there are corrupted blocks.
What method do you guys recommend ?
Click to expand...
Click to collapse
it is best to upgrade via odin .. then comes kies but i am not sure if installing it will lock ur device again.
nokiamodeln91 said:
from the phone it becomes OTA and lot of chances that the phone gets screwed up
if emmc check crashes or hangs that means there are corrupted blocks.
it is best to upgrade via odin .. then comes kies but i am not sure if installing it will lock ur device again.
Click to expand...
Click to collapse
So i should go ahead and put the stoc ics firmware for my country and update with odin over my rooted gb 2.3.6, no harm will occur?
Should i put the .pit for 16GB when using odin or just put the fw in PDA and hit Start?
I asked if the unlock apk is compatible with ICS also...but i will find out soon )
Thanx
Just read first line on my signature and flash ICS using Odin
I recommend go clean(first wipe cache and data before flashing ICS) and don't wipe once you are on ICS stock kernel
After this find second link on my sign and use method 1A/1B to root.
No need to use pit, though detail instruction is there on my thread
I asked if the unlock apk is compatible with ICS also...but i will find out soon )
Click to expand...
Click to collapse
go thru this thread.. althou no personal exp
http://forum.xda-developers.com/showthread.php?t=1806486
dr.ketan said:
Just read first line on my signature and flash ICS using Odin
I recommend go clean(first wipe cache and data before flashing ICS) and don't wipe once you are on ICS stock kernel
After this find second link on my sign and use method 1A/1B to root.
No need to use pit, though detail instruction is there on my thread
Click to expand...
Click to collapse
Let me get this right:
1 go to CMWR and clear data and cash, then exit, reboot
2.go into download mode vol - + home+ power
3 connect odin and select the rom into pda
4 hit start and let it do its job, it will reboot into the new ics after that.
then my phone will probably have ICS running but no root and so i cannot use unlock apk, only if i IMEI unlock it so i can stay on stock all the way.
So after i flash stock ics using odin i shall never do a hard reset on my phone even if i do not root it?
thanx for patience and help
correct me if i am wrong at any steps.
thanx again
bustard83 said:
Let me get this right:
1 go to CMWR and clear data and cash, then exit, reboot
2.go into download mode vol - + home+ power
3 connect odin and select the rom into pda
4 hit start and let it do its job, it will reboot into the new ics after that.
then my phone will probably have ICS running but no root and so i cannot use unlock apk, only if i IMEI unlock it so i can stay on stock all the way.
So after i flash stock ics using odin i shall never do a hard reset on my phone even if i do not root it?
thanx for patience and help
correct me if i am wrong at any steps.
thanx again
Click to expand...
Click to collapse
1. yes You are on GB ROM, so safe
2.OK
3.OK
4.Not probably but it will boot to ROM which you have flash.
If you have network lock, then you have to Root your device to unlock it.
For that use 2nd link on my signature to root it.
Again here one more thin i have to clear
If you select ICS 4.0.4 to flash, then direct network unlock won't work.
For this refer to 'Toolbox' in my signature and follow tool No 18 and then 17
In case of 4.0.3, Tool No 17 only will be fine.
dr.ketan said:
1. yes You are on GB ROM, so safe
2.OK
3.OK
4.Not probably but it will boot to ROM which you have flash.
If you have network lock, then you have to Root your device to unlock it.
For that use 2nd link on my signature to root it.
Again here one more thin i have to clear
If you select ICS 4.0.4 to flash, then direct network unlock won't work.
For this refer to 'Toolbox' in my signature and follow tool No 18 and then 17
In case of 4.0.3, Tool No 17 only will be fine.
Click to expand...
Click to collapse
hmm mine is not CMWR is Android System recovery 3e... would that make any difference? in the process mentioned by you?
You mean after flashing ics?
Sent from my GT-N7000 using xda premium
dr.ketan said:
You mean after flashing ics?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
No, now on GB 2.3.6 ! I pushed vol up home and power
and it rebooted in Android System Recovery (3e)
GB is safe for wipe, even you are on stock 3e recovery, wipe cache and data/factory reset
Sent from my GT-N7000 using xda premium
dr.ketan said:
GB is safe for wipe, even you are on stock 3e recovery, wipe cache and data/factory reset
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Should i flash Hydracore v5 kernel with odin after my odin upgrade to stock ics just to be sure that no brick bug will happen to my note if i ever do a HW reset?
Yes safe kernel always safe.
Flashing kernel with Odin raise flash counter.
You can flash phillz kernel (which is also safe) from stock recovery. If you want to flash hydracore or any other later you can flash with phillz recovery without raising counter.
Sent from my GT-N7000 using xda premium
I was trying to install Ultimate_N7000_LSC_JB_4.1.2_v5.1 on non-rooted device.
After booting into Recovery and installing CWM, i tried Data wipe/Factory reset.
(Battery was 100%)
The screen switched of suddenly and now i am stuck.
Here are somethings i have tried:
1) Tried flashing N7000DDLRB_N7000ODDLR4_N7000DDLR1_HOME.tar.md5 using ODIN. Never goes beyond NAND flashing (Tried in Admin mode, with ODIN Mode)
2) Tried flashing cm-9.1.0-n7000 and had status 0 and status 7 error many times.
Most of the flashing methods mention : "wipe data/Factory reset". Whenever i do that, i get stuck in "Wiping Data... .Formatting /data"
I have tried "Fix permissions", it wont work.
I didnt take a ROM backup and now i really regret it.
Currently when i navigate using CWM i can see all my internal as well as external memory files. So, i guess my OS is gone and files are still there.
The Custom Rom Counter says: Yes (Count 4) in ODIN mode.
Can someone help ? Please i am desperate.
What rom you on before flashing?..GB or ICS?
Sent from my GT-N7000 using Tapatalk 2
ICS 4.0.4
I had not done any Modifications, rooting to my N7000 before yesterday.
Would like to go back to Any ROM.
Unrooted ROM (ICS 4.0.4), Leaked JB Rom, CM9, CM10. Any ROM. Just want to get my phone up and running
What error do you get when flashing with Odin?
Does it stop at "factoryfs.img"?
How did you install CSM on your stock Rom ICS 4.0.4?
Your "soft bricked" sounds more like "super bricked" to me.. Did you use CWM.zip to wipe?
Tapatalking on my n7000
Yes. I used CWM.zip.
But now that my phone is not working, how do know what is the firmware version?
(http://forum.xda-developers.com/showthread.php?t=1656635)
Can you tell me the exact file names i should use
PDA: CODE_N7000xxxxx_CL627135_REV02_user_low_ship.tar.m d5
PHONE: MODEM_N7000xxxxx_REV_05_CL1067428.tar.md5
CSC: GT-N7000-MULTI-CSC-Oxxxxx.tar.md5
What does xxxx stand for? I have the Serial No. of my phone. And have done normal OTA updates only.
Brought from flipkart in August (if it helps narrow down the xxxx)
Superbricked or soft, please help.
Just downloaded some CWM file (Sorry i searched a lot, i couldnt remember the source)
Here are the steps:
Flash it with Odin 1.85, (Click PDA, choose the file and press Start)
After this you will have Root on your phone.
Now you can go into CWM and flash the Rom.
1) Download Ultimate XXLSC Jelly Bean 4.1.2 custom ROM for Galaxy Note to the PC
2) Connect the device to PC using USB cable and transfer the downloaded ROM zip file to the phone's SD card
3) Unplug the USB cable from the phone and then turn it off
4) Enter into Recovery mode by switching on the phone while pressing and holding Volume Up, Home and Power buttons together
5) In CWM Recovery, perform a full data wipe
Here is where it suddenly stopped and the screen went blank. (I am double sure battery was 100%)
Thanks for the prompt replies
Yup..its a wrong way to flash costum rom on stock ics...
try flash stock rom using odin, if its stuck on "factoryfs.img".. I'm sure your super bricked your phone..
Sent from my GT-N7000 using Tapatalk 2
zai89 said:
Yup..its a wrong way to flash costum rom on stock ics...
try flash stock rom using odin, if its stuck on "factoryfs.img".. I'm sure your super bricked your phone..
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
ok. But please help me. How to take it out of super-brick.
In ODIN it gets stuck in "NAND write start"
I already tried flashing Stock ROM N7000DDLRB_N7000ODDLR4_N7000DDLR1_HOME.tar.md5 in ODIN and it gets stuck in "NAND write start"
I found this post. http://forum.xda-developers.com/show....php?t=1656635
Should i follow this?
Can you tell me the exact file names i should use
PDA: CODE_N7000xxxxx_CL627135_REV02_user_low_ship.tar.m d5
PHONE: MODEM_N7000xxxxx_REV_05_CL1067428.tar.md5
CSC: GT-N7000-MULTI-CSC-Oxxxxx.tar.md5
What does xxxx stand for? I have the Serial No. of my phone. And have done normal OTA updates only.
Brought from flipkart in August (if it helps narrow down the xxxx)
(Thanks in advance)
If you have warranty then claim it.. Super brick means that the emmc chip it's burned.. There's some methods to get it to partially work but you lose around 3Gb of memory and generally you can not use TW roms.. Or at least stock TW.. Not to mention the random reboots and freezes..
So most likely if you don't have warranty then use the pit file method or pay for a motherboard replacement..
Tapatalking on my n7000
Thanks for the suggestion.
I managed to flash 4.0.3 ROM and stock Kernel and it somehow worked. (did too many things)
Here's the current status: Running 4.1.2 (XXSLO, ZSLM5). Unrooted and stock ROM. (Updated from 4.0.3 to 4.1.2 in kies)
Everything is back. The phone runs good. But when i try installing any software, it will freeze. The apk/app installs eventually but after 2-3 reboots.
Can you tell me the issue?
I read it somewhere that the "Cache" partition is damaged.
Can someone please tell me any way to avoid freezes.
msedek said:
If you have warranty then claim it.. Super brick means that the emmc chip it's burned.. There's some methods to get it to partially work but you lose around 3Gb of memory and generally you can not use TW roms.. Or at least stock TW.. Not to mention the random reboots and freezes..
So most likely if you don't have warranty then use the pit file method or pay for a motherboard replacement..
Tapatalking on my n7000
Click to expand...
Click to collapse
Hope you guys can help me.
Was updating my ICS (Criskelorom) to JB 4.1.2 XXLT6 ROM of Philz (PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5) via Odin 3.07. Initially had some issues but, managed to get to where Odin resulted in a PASS. On REBOOT I only get up to the Samsung Galaxy GT-N7000 screen with a yellow ! triangle at the bottom. I was able to get to both Recovery and Download modes but would never get passed to homescreen and just stay on black screen.
Did it several times and got worried I'd brick my phone so I ran the ICS zip I had stored on my SD via Recovery mode and was able to get my phone running. Still want to pursue my JB upgrade though but, not sure if I was doing it right. Any help would be much appreciated guys.
Here is what I did...
MADE SURE OF THE FF.:
1) Install USB driver for Samsung Galaxy Note to transfer files between the phone and the computer using download of KIES from Samsung site
2) Enable USB Debugging Mode on the phone to connect the Android device with the computer
3) created a back-up of my contacts only
4) charged to above 80% battery charge
5) The phone should be factory unlocked and not locked to any particular carrier - I had unlocked it during my ICS upgrade from the GB original OS
THEN FOLLOWED THE STEPS:
Step-1: Download PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 for Samsung Galaxy Note to the computer
Step-2: Download Odin 3.07 which will help to install the root package on the phone. Extract the Odin zip to get Odin3 v3.07.exe file with some other files
Step-3: Place the Galaxy Note into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot appears on the phone's screen. Now press the Volume Up button to continue to enter into Download Mode
Step-4: Run Odin3 v3.07.exe as an Administrator
Step-5: Connect the Note to the computer using USB cable while it is in the Download Mode. Wait for some time until Odin detects the phone. When the device is connected successfully, the ID: COM box in Odin will turn yellow with the COM port number. Also, the successful connection will be indicated by a message saying Added in Odin.
Note: If the Added message does not come then try another US port, try the one located at the back side of the computer. If Odin still fails to detect the device then re-install USB driver
Step-6: In Odin, click the PDA button and select the PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 file
Step-7: Now configure the Odin settings. Ensure that the Auto Reboot and F.Reset Time checkboxes are selected in Odin. As for the Re-Partition, uncheck the option
Step-8: Once everything is set, click the Start button in Odin. The installation should begin now and would take about few minutes to complete
Step-9: When the installation process is completed the phone will restart automatically. And soon a PASS message with green background will appear in the Odin indicating successful installation. After the home screen appears on the phone, unplug the USB cable from the device to disconnect it from the computer
Was able to reach Step-9 but my phone would not get to home screen.
Please help me with any advise anyone can give me?
thanks.
By the way, saw another option for Steps 5-6:
Step-5: Connect your Note N7000 with your PC using a data cable. Once the device is successfully connected, you will see a notification in Odin in the bottom left saying Added!! - if for some reason, you do not see the said notification, try another USB port. Also, check for ID:COM port being depicted by a number in yellow to make sure that you have successfully added your device.
Select the following files in Odin at their respective tabs from extracted XXLT6 firmware folder:
Step-6:
Click the PDA button to select the .tar file extracted earlier.
Click the Phone button, and select file with *modem* in its name (ignore, if this file does not file exist).
Next, click the CSC button, and select file with *csc* in its name (ignore, if this file does not file exist).
Click the PIT button to select the .pit file. (ignore, if this file does not file exist).
Ensure that Auto Reboot and F. Reset Time are the only options selected in Odin window. Also ensure to select Re-Partition checkbox only if you are using a .pit file.
Except since I only had the TAR file I ignored the rest so I assumed I was doing it right up to that point. Also, the YELLOW highlight in Odin 3.07, wasn't yellow but kind of light blue.
That was it. All I did. Still, not succesful.
Please help.
Thanks.
Phew! That's a lot to read.. The file you are trying to flash is just a kernel not a whole rom. That's why your phone after the flash has a JB kernel and ICS rom. That's why the phone does not boot. To upgrade to JB, download a stock rom from sammobile.com and flash it using Odin the same way just in PDA of Odin.
nokiamodeln91 said:
Phew! That's a lot to read.. The file you are trying to flash is just a kernel not a whole rom. That's why your phone after the flash has a JB kernel and ICS rom. That's why the phone does not boot. To upgrade to JB, download a stock rom from sammobile.com and flash it using Odin the same way just in PDA of Odin.
Click to expand...
Click to collapse
Sorry about the read. =)
Was thinking I'd rather be complete than have anyone helping need to ask more clarifications to help me. =D
Oh that's why. Thanks for the reply. I will do that.
So I need to get the WHOLE ROM from the site you mentioned. A ROM that is complete, Kernel and all. Actually I thought I did get a complete ROM. Did not realize it was just a Kernel. What would be the best way to determine if a ROM is complete? What is usually the size of the file itself? The one I downloaded was like 8MB so I thought that was pretty big. Kinda looked for awhile for that XXLT6 original JB ROM so didn't stop to think if it was just a Kernel. My bad.
By the way, are the ROMs on Sammobile rooted? Or do I need to root them?
thanks again!
izmoothski said:
Sorry about the read. =)
Was thinking I'd rather be complete than have anyone helping need to ask more clarifications to help me. =D
Oh that's why. Thanks for the reply. I will do that.
So I need to get the WHOLE ROM from the site you mentioned. A ROM that is complete, Kernel and all. Actually I thought I did get a complete ROM. Did not realize it was just a Kernel. What would be the best way to determine if a ROM is complete? What is usually the size of the file itself? The one I downloaded was like 8MB so I thought that was pretty big. Kinda looked for awhile for that XXLT6 original JB ROM so didn't stop to think if it was just a Kernel. My bad.
By the way, are the ROMs on Sammobile rooted? Or do I need to root them?
thanks again!
Click to expand...
Click to collapse
They are just stock roms, to root again use the philz kernel but for jb this time. Also use the .zip this time instead of tar file, you can flash the zip file from stock recovery itself. You can raed more in philz kernel thread
Sent from my GT-N7000 using Tapatalk
treacherous_hawk said:
They are just stock roms, to root again use the philz kernel but for jb this time. Also use the .zip this time instead of tar file, you can flash the zip file from stock recovery itself. You can raed more in philz kernel thread
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Got it, thank you Sirs you've all been a very big help. I ran into some issues with TW right after completing the install of 4.1.2. Every darn thing was stopping even acore and TW. Was about to chicken out and go back to my safety ICS ROM when I got to read some stuff about needing to Clear/Reset on Recovery mode after any firmware flashing as well as Clearing the Cache so I did. And voila, it worked. I think I'll rest my worrying brain for now on the root. =P
I'll root it next week. I'll just have fun with it for now. Been up playing around with this for over 24hours now. Having too much fun but already drained.
Thank you again for you help!
same situation here...!!!
hello XDA ppl...
I had ICS 4.0.4 and attempted to use PhilZ-cwm6-XXLTA-ATL-5.15.0.tar.md5.
That took me to the same situation I think... kernel for JB and ICS ROM...
I power on my phone and it gets to a GT-N7000 Note + Yellow Triangle screen and NO MORE!
I can get to PhilZ Recovery Mode or ODIN Download Mode.
That´s all...
I will attempt right now what you told the creator of this thread and update if it helped.
any help is welcome...
FIXED!!!
AWESOME!!!
My bot is back again!!!
Thanks a lot guys...
This thread worked as a charm. :victory:
1. Odin 3.0.X
2. Factory Firmware
3. Flash it as PDA.
4. No yellow triangle.
5. Removed battery and waited 5 seconds.
6. recovery mode.
7. clear data/factory reset.
Done!
---------- Post added at 03:33 AM ---------- Previous post was at 03:28 AM ----------
juliowong said:
AWESOME!!!
My bot is back again!!!
Thanks a lot guys...
This thread worked as a charm. :victory:
1. Odin 3.0.X
2. Factory Firmware
3. Flash it as PDA.
4. No yellow triangle.
5. Removed battery and waited 5 seconds.
6. recovery mode.
7. clear data/factory reset.
Done!
Click to expand...
Click to collapse
Well... finally I am back to ICS.
Now gotta find a safe way to get it to JB.
juliowong said:
Now gotta find a safe way to get it to JB.
Click to expand...
Click to collapse
Safest way to get to JB with wipe (that is formatting) is to get philz kernel for ICS and then reboot to recovery do factory reset and wipe /system /data /internal storage /cache and then reboot to download mode and flash JB from odin. Else if you dont want to loose data, just boot into download mode and flash JB using odin.
juliowong said:
6. recovery mode.
7. clear data/factory reset.
Well... finally I am back to ICS.
Now gotta find a safe way to get it to JB.
Click to expand...
Click to collapse
Yeah!! May be you want to start by not wiping on a stock ICS kernel.