Related
I'm looking to root my phone.
I read a lot on xda and I found a lot of interesting information.
But right now I don't know which kernel/rom combination to use.
I've looked around and I don't really like the feel of ICS. I prefer GB.
So what now?
custom kernel and stock rom?
darky rom?
cm7?
Thank you!
have you root your phone?
what firmware you using now?
Sent from my GT-I9000 using Tapatalk
awandroid89 said:
have you root your phone?
what firmware you using now?
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
No I didn't root it yet.
Stock Bell UGKG3 firmware from kies.
mathieums said:
No I didn't root it yet.
Stock Bell UGKG3 firmware from kies.
Click to expand...
Click to collapse
If u want ics go dark Knight, they got good support
If you like my posts hit thanks
mathieums said:
I'm looking to root my phone.
I read a lot on xda and I found a lot of interesting information.
But right now I don't know which kernel/rom combination to use.
I've looked around and I don't really like the feel of ICS. I prefer GB.
So what now?
custom kernel and stock rom?
darky rom?
cm7?
Thank you!
Click to expand...
Click to collapse
Darky Rom is a good place to start for your first custom rom flash.
All you need to do is reboot to download mode.
Connect your phone to your PC
Open Odin
Install an RE version of Darky Rom
If you do want to try ICS Slim Rom is very nice and i have been running it here for a few weeks with no issues
JaY_III said:
Darky Rom is a good place to start for your first custom rom flash.
All you need to do is reboot to download mode.
Connect your phone to your PC
Open Odin
Install an RE version of Darky Rom
Click to expand...
Click to collapse
+1 :thumbup:
Sent from my GT-I9000 using XDA
im using dark knight rom with the devil kernel and is really good and quick. its also really easy to install for a beginner through cwm so give it a try
i have problem on dark knight v5.5
im gettin sd card scanning error
heres my question please reply my question
http://forum.xda-developers.com/showthread.php?p=25736760#post25736760
I'll post a link to a fool proof way of getting ur phone back, then just root and flash again, It was just a bad flash. It happens to the bestowed for us every now and again
If you like my posts hit thanks
Nevermind here the whole post
Heres the links for how to root gingerbread 2.3.3 jvk
Download JVK http://www.multiupload.nl/1DFDXTO27I and extract it.
Go to this page for a guide on how to install http://www.theandroidsoul.com/how-t...d-2-3-3-rom-on-samsung-galaxy-s-instructions/
Download odin http://www.multiupload.nl/VRM4PMTM10 ignore the pit files
Install the rom
To root it use this guide http://www.theandroidsoul.com/rooting-xxjvk-android-2-3-3-rom-for-galaxy-s/
and download this file http://www.mediafire.com/?925zdf1j73nx94n
I TAKE NO RESPONSIBILTY FOR ANY DAMAGE DONE TO YOUR PHONE.
If you like my posts hit thanks
For ics this is a good thread of bench marks for the various roms.
http://forum.xda-developers.com/showthread.php?p=23793688
Sent from my GT-P7500 using Tapatalk 2
Thanks for the benchmark thread.
Does CM9 have swype?
or which rom does have it?
For swype just search for swype beta and you can install on any rom. I've tried a lot of the ics roms (cm9, weui, aokp, cna, team icsgs, dark night, slim ics). My favourite was Team ICSSGS. Unfortunately this has not been updated in a while so currently on slim ics which is fast becoming my favourite.
If you havn't flashed ics before i recomend either following ics for dummies or ics333 installation thread in the general section of the sgs forum. Once you've got an ics rom and basics then it is easy to update to slim or any other rom you choose.
Sent from my GT-P7500 using Tapatalk 2
Recommend：Shadow0-Rom-v2.0.1G-The-pendulum
-DO NOT FLASH or WIPE FROM I9220 LEAK REPACK ROMS and KERNELS
-DO NOT FLASH or WIPE FROM LPY BASED ICS ROMS and KERNELS (including this one!)
-For any wipe or flash purpose use Abyss Kernel v 4.2 with redpill recovery!
For anyone wants to flash the kernel via cwm here is the cwm formatted zip of Cfroot 5.3 LPY kernel. Thanks to Chainfire for the rooting the kernel.
So having chainfires cf-root thread isn't enough then...
Sent from my GT-N7000 using Tapatalk 2
thank you
Reb0rn said:
So having chainfires cf-root thread isn't enough then...
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
this is not the odin version. there are situations that this version is necessary.
Hi,
I used it to flash from ALBA V2 DAFUQ to LPY without using having to go home and use ODIN.
So ... MUCHAS GRACIAS ;-)
You have been thanked for your post
MaxiJavi said:
Hi,
I used it to flash from ALBA V2 DAFUQ to LPY without using having to go home and use ODIN.
So ... MUCHAS GRACIAS ;-)
You have been thanked for your post
Click to expand...
Click to collapse
You never heard of mobile odin ore cwm app?
robertberma said:
You never heard of mobile odin ore cwm app?
Click to expand...
Click to collapse
There are some scenarios that it could be vital. Think little bit about it. If you cannot contribute, i recommend at least your criticts should. If somebody needs it, its there. That's it!
I lost root after installing ICS, just want to be sure that this is flashable through Mobile Odin?
encrypshun said:
I lost root after installing ICS, just want to be sure that this is flashable through Mobile Odin?
Click to expand...
Click to collapse
This is flashable through cwm recovery. If you want to use it in mobile odin, extract the "zImage" file from the zip, put it to your sdcard and show it in mobile odin.
encrypshun said:
I lost root after installing ICS, just want to be sure that this is flashable through Mobile Odin?
Click to expand...
Click to collapse
Yes but first extract the zip and you can flash zimage.
Thanks mate just what i needed. Could not instal via odin pro.
Sent from my GT-N7000 using xda premium
Huge thank you. Got stuck at boot screen during an Odin mobile flash but was able to boot to recovery and install via cwm. Saved me some grief for sure!
Sent from my GT-N7000 using XDA
Definitely a version of the kernel that we need to have in our disposal. CWM is a very practical solution In many cases.
Sent from my GT-N7000 using Tapatalk 2
Any review for this new kernel?
is this the same kernel that they are talking about it here:
http://forum.xda-developers.com/showthread.php?t=1633943
weng_cas said:
is this the same kernel that they are talking about it here:
http://forum.xda-developers.com/showthread.php?t=1633943
Click to expand...
Click to collapse
NO, this is NOT the same kernel. Please do not spread wrong information. This is LPY Kernel that came with official ICS, this is no the leaked kernel.
ajamils said:
NO, this is NOT the same kernel. Please do not spread wrong information. This is LPY Kernel that came with official ICS, this is no the leaked kernel.
Click to expand...
Click to collapse
well forgive me i forgot to add a question mark at the end of the sentence but eventually my sentence started with "is" so apparently it is most likely a question. i was just asking if this is the same kernel that has a bug?
this is what's written:
Kernels that are likely affected - it's too early to be sure:
XXLPY official ICS release for the Samsung Galaxy Note (thanks to Chasmodo for sacrificing his device to find this out) - One hardbrick has been reported in the past few days, others say it's safe, use at your own risk! In my opinion one hardbrick is enough not to trust it.
@weng_cas
yeah this looks to be the same LPY kernel chainfire released shortly after the official german ics rom was released
chainfire's post as to whether its safe or not:
http://forum.xda-developers.com/showpost.php?p=25966147&postcount=1322
weng_cas said:
well forgive me i forgot to add a question mark at the end of the sentence but eventually my sentence started with "is" so apparently it is most likely a question. i was just asking if this is the same kernel that has a bug?
this is what's written:
Kernels that are likely affected - it's too early to be sure:
XXLPY official ICS release for the Samsung Galaxy Note (thanks to Chasmodo for sacrificing his device to find this out) - One hardbrick has been reported in the past few days, others say it's safe, use at your own risk! In my opinion one hardbrick is enough not to trust it.
Click to expand...
Click to collapse
I just love these guys who came out of space and get in conversation
You have hole (closed) thread to read about that mysterious bricking of that 1/100000 device on this kernel and other stuff so search and read, stop spamming this guys thread
Reb0rn said:
So having chainfires cf-root thread isn't enough then...
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Ignore the losers who come into threads with nothing to add but waste time typing useless and negative posts.
Thanks for the zip though, it is useful to have
From the Best: Galaxy Note
Hey Everyone
I have SAMSUNG GALAXY S and is currently running on the FROYO 2.2.1
FROYO.XXJPU and want to go to the ICS version
I tried searching on the forums and still not got the complete answer
Please let me know on how to do this
Thanks
First flash valúe pack and then root it using cfroot.
After that install any ics rom you like through recovery mode.
Sent from my GT-I9000 using Tapatalk 2
You would need to be on GB to be able to upgrade to ICS...
1st Step is to Update your phone to GB: https://www.fixmystuff.in/FMS_Forum/threads/samsung-galaxy-s-gt-i9000-flashing-to-original-rom.46/
2nd Step is to root your phone: https://www.fixmystuff.in/FMS_Forum...-i9000-rooting-gt-i9000-2-3-3-india-ddjv9.47/
3rd Step is try any ICS ROMs available: https://www.fixmystuff.in/FMS_Forum...dwich-4-0-x-for-samsung-galaxy-s-gt-i9000.83/
gopalasubramanium said:
You would need to be on GB to be able to upgrade to ICS...
1st Step is to Update your phone to GB
2nd Step is to root your phone
3rd Step is try any ICS ROMs available
Click to expand...
Click to collapse
Why all the spam?
- CF ROOT
- CM7 or straight CM9 will be enough too imho!
I prefer going to CM9 through CM7. Giving me less problems.
So CF ROOT - just pick a CM7 nightly here http ://get.cm/?device=galaxysmtd - a CM9/ICS ROM of choice and let's go!
ratl0lz said:
Why all the spam?
- CF ROOT
- CM7 or straight CM9 will be enough too imho!
I prefer going to CM9 through CM7. Giving me less problems.
So CF ROOT - just pick a CM7 nightly here http ://get.cm/?device=galaxysmtd - a CM9/ICS ROM of choice and let's go!
Click to expand...
Click to collapse
Thanks everyone
Now for this CF ROOT there are lot of files here
http://forum.xda-developers.com/showthread.php?t=788108
As I have FROYO 2.2.1 XXJPU right now
Do I install any of these
CF-Root-XX_OXA_JPU-v1.3-BusyBox-1.15.3.zip
CF-Root-XX_OXA_JPU-v1.3-BusyBox-1.17.1.zip
Again thanks for your help
Just take the last one, and you can flash it in Heimdall or Odin. Don't forget to install the proper drivers.
Sent from my GT-I9000 using Tapatalk
ratl0lz said:
Just take the last one, and you can flash it in Heimdall or Odin. Don't forget to install the proper drivers.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
I flashed this from ODIN CF-Root-XX_OXA_JPU-v1.3-BusyBox-1.17.1.zip
and it installed the SUPER USER and then downloaded the ROM MANAGER from market. But now the CWM recovery options are not coming at boot
WHat could be the reason for this ???????????????????????????????????/
serein1 said:
I flashed this from ODIN CF-Root-XX_OXA_JPU-v1.3-BusyBox-1.17.1.zip
and it installed the SUPER USER and then downloaded the ROM MANAGER from market. But now the CWM recovery options are not coming at boot
WHat could be the reason for this ???????????????????????????????????/
Click to expand...
Click to collapse
you have to flash it twice, to get in new recovery, i mean the update.zip from rom manager...
after then flash CM9 twice, because on the first time it bootloops- dont panic! just do a three combo (to get to recovery and then flash cm9 and then any ICS Rom of your choise)
did it work?
matesc said:
you have to flash it twice, to get in new recovery, i mean the update.zip from rom manager...
after then flash CM9 twice, because on the first time it bootloops- dont panic! just do a three combo (to get to recovery and then flash cm9 and then any ICS Rom of your choise)
did it work?
Click to expand...
Click to collapse
THe recovery came after flashing twice now flashing the CM9
Thanks
serein1 said:
THe recovery came after flashing twice now flashing the CM9
Thanks
Click to expand...
Click to collapse
Y r welcome
I had to figure it out by my self. I have tried to flash cm9 about 10 times, before it has been done
Sent from my GT-I9000 using XDA
matesc said:
Y r welcome
I had to figure it out by my self. I have tried to flash cm9 about 10 times, before it has been done
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
For some reasons the CM9 was giving errors
(THIS APPLICATION HAS STOPPED WORKING)
so I flashed another rom [ICS ROM]Tiramisu+ I.C.E.A.G.E. V.1.9.6 I'M DIFFERENT!
and its working great.
I was thinking if there is any way by which we could keep multiple roms on phone. SO that we could choose at the boot which one to logon.
I wish if that was possible.
Sorry again ratl0lz, but this is not spamming. I have already written something for helping others and just asking them to visit the page instead of reproducing everything here. Just see the reply to your reply, just writing too technical may not help for someone who does not know things as good as you know.
Thanks,
Hey Guys,
I have P990 and I'm using CM10 nightly, and I really want to change ROM as this works really bad on my device.
I downloaded DjangoManouche X 1.6.1 and whenever I go to install, it goes through the first steps, then screen gets black and goes back to Clockwork Recovery. I tried with other ROMs and similar things happen.
What could it be?
Thanks|
Did you make ful wipe?
Factory reset,wipe cache partiton,wipe data,wipe cache,wipe system and wipe dlvik.
Sent from my LG-P880 using xda app-developers app
xperia u20i said:
Did you make ful wipe?
Factory reset,wipe cache partiton,wipe data,wipe cache,wipe system and wipe dlvik.
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your response.
Yes, I've wiped everything, I tried formatting everything, I did a factory reset, all of that
I don't know...maybe you could try reflash recovery...
And do you pay attention on wich bootloader version of rom you installing...
Sorry for bad english
Sent from my LG-P880 using xda app-developers app
---------- Post added at 07:40 PM ---------- Previous post was at 07:38 PM ----------
And if you installing from external sd card,maybe that could be problem...try from internal...maybe is sd card broken
Sent from my LG-P880 using xda app-developers app
xperia u20i said:
I don't know...maybe you could try reflash recovery...
And do you pay attention on wich bootloader version of rom you installing...
Sorry for bad english
Sent from my LG-P880 using xda app-developers app
---------- Post added at 07:40 PM ---------- Previous post was at 07:38 PM ----------
And if you installing from external sd card,maybe that could be problem...try from internal...maybe is sd card broken
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Sorry for my ignorance,
how can I do that?
Oh also, I can install other CM ROMs, those are the only ROMs I can install...not other one!
With all in one tool i think there must be option,...i'm not expert so you better check this before try'n...but first try install rom from internal card if you didn't...
Sent from my LG-P880 using xda app-developers app
xperia u20i said:
With all in one tool i think there must be option,...i'm not expert so you better check this before try'n...but first try install rom from internal card if you didn't...
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Ok, so a few things I haven't mentioned before, whenever I connect my phone VIA usb to my computer, nothing happens. I don't have the possibility to flash anything VIA USB, so what can I do?
Do you install all drivers?look in all in one tool section...there is everything...
Sent from my LG-P880 using xda app-developers app
if you're on an official cm nightly then you're on a old bootloader... django is on the new bootloader...
search dev thread for aio tools and how to switch to a new bootloader
edit:
or install one of cm based old bl roms outthere (there is also an old/new bootloader converter tool somewhere in dev thread as well but i don't know if it works for converting all roms - it worked for me on tonyp "the rom" roms up to build 26)
60nine said:
if you're on an official cm nightly then you're on a old bootloader... django is on the new bootloader...
search dev thread for aio tools and how to switch to a new bootloader
edit:
or install one of cm based old bl roms outthere (there is also an old/new bootloader converter tool somewhere in dev thread as well but i don't know if it works for converting all roms - it worked for me on tonyp "the rom" roms up to build 26)
Click to expand...
Click to collapse
I just installed CM7 stable, so what should I do now?
And how you did this?where was the problem?
Sent from my LG-P880 using xda app-developers app
why cm7?
---------- Post added at 09:02 PM ---------- Previous post was at 09:00 PM ----------
xperia u20i said:
And how you did this?where was the problem?
Click to expand...
Click to collapse
i explained his problem, but i still don't know why he installed a prehistoric cm7 instead one of the newer cm10.2 based roms
I wonder to...maybe is gb lower... who know's
Sent from my LG-P880 using xda app-developers app
xperia u20i said:
I wonder to...maybe is gb lower... who know's
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Well, just because it's the only ROM I can install. Still want to upgrade, but I can't do anything. USB isn't working, ROM from external SD don't install...
don't get me wrong, cm7 is a good rom (especially if you installed Temasek one + vadonka kernel) - battery is great with this combo (i was using that combo for almost a year until cm10/10.1/10.2 versions of tonyp roms + pengus kernels came out in the beginning of 2013)...
but cm10.2 has some usefull stuff and many improvements over cm7...
i can only suggest you to read some more threads in the developer section... moving to a new bootloader can give you some more benefits if you're into the newest roms (since the rom developers usually support only the new bootloader first, and then they make an old bootloader versions of their roms/kernels as well - or they don't - it's up to them and their free time)
i'm also considering to finally switch to a new bootloader - but i'm still waiting for the new cm11 (kitkat) roms and 3.1+ kernel to become stable enough for a daily use...
it's up to you to see what you need most out of the rom... but some reading before flashing is mandatory... if you've read some more - you'd already know your problem before i wrote my post and explaining the old/new bl issue...
once a week someone comes up with the same problem because he doesn't read about bootloaders or is just lazy to read the 1st posts in the rom threads...
i hope i helped... cheers
occured kenblis
60nine said:
don't get me wrong, cm7 is a good rom (especially if you installed Temasek one + vadonka kernel) - battery is great with this combo (i was using that combo for almost a year until cm10/10.1/10.2 versions of tonyp roms + pengus kernels came out in the beginning of 2013)...
but cm10.2 has some usefull stuff and many improvements over cm7...
i can only suggest you to read some more threads in the developer section... moving to a new bootloader can give you some more benefits if you're into the newest roms (since the rom developers usually support only the new bootloader first, and then they make an old bootloader versions of their roms/kernels as well - or they don't - it's up to them and their free time)
i'm also considering to finally switch to a new bootloader - but i'm still waiting for the new cm11 (kitkat) roms and 3.1+ kernel to become stable enough for a daily use...
it's up to you to see what you need most out of the rom... but some reading before flashing is mandatory... if you've read some more - you'd already know your problem before i wrote my post and explaining the old/new bl issue...
once a week someone comes up with the same problem because he doesn't read about bootloaders or is just lazy to read the 1st posts in the rom threads...
i hope i helped... cheers
Click to expand...
Click to collapse
How is Cm10.2 working for you? Battery life/speed/etc
I had 10.1 I believe and it was horrible.
I can' install new bootloaders, etc...as I can't enter debug mode, nor do anything
just to make sure...
your usb doesn't work when the phone is fully booted into the rom or it doesn't work for SW upgrade?
did you try other usb ports? (don't use usb hubs for this, especially for SW upgrade stuff)
did you install the correct windows drivers for the phone?
---------- Post added at 09:27 PM ---------- Previous post was at 09:23 PM ----------
tom9191 said:
I had 10.1 I believe and it was horrible.
Click to expand...
Click to collapse
it was horrible if you used the official CM10.1 nightlies... not if you've been using tonyp cm10.1 based roms and pengus kernels... believe me...
currently i'm on the tonyp "The rom" build 26 + pengus kk126 kernel (no ram hack version)
battery lasts for almost 2 days with moderate use (around 3 hrs screen on + wi-fi on, some calls, some messages)
phone is snappy, i don't have syncs turned on in any app...
phone is oc-ed to 1500mhz (min 216, max 1500mhz), and if you care about the benchmarks - it gives a solid 9000+ in antutu...
for a 3 year old phone - i'm satisfied enough...
btw what version of cwm do you have?
your starting point can be here
http://forum.xda-developers.com/showthread.php?t=2020737
and please at least read the 1st page of the thread if not all of it (for user comments)
there is also an option to install the correct windows drivers and a tutorial for windows 8 (i'm on win7 x64)
I've tried different ports, different cables, different copmuters...I've read that a lot of people have this issue though, especially after upgrading to CM7...which was my case. Ever since I haven't been able to do it
60nine said:
just to make sure...
your usb doesn't work when the phone is fully booted into the rom or it doesn't work for SW upgrade?
did you try other usb ports? (don't use usb hubs for this, especially for SW upgrade stuff)
did you install the correct windows drivers for the phone?
---------- Post added at 09:27 PM ---------- Previous post was at 09:23 PM ----------
it was horrible if you used the official CM10.1 nightlies... not if you've been using tonyp cm10.1 based roms and pengus kernels... believe me...
currently i'm on the tonyp "The rom" build 26 + pengus kk126 kernel (no ram hack version)
battery lasts for almost 2 days with moderate use (around 3 hrs screen on + wi-fi on, some calls, some messages)
phone is snappy, i don't have syncs turned on in any app...
phone is oc-ed to 1500mhz (min 216, max 1500mhz), and if you care about the benchmarks - it gives a solid 9000+ in antutu...
for a 3 year old phone - i'm satisfied enough...
btw what version of cwm do you have?
your starting point can be here
http://forum.xda-developers.com/showthread.php?t=2020737
and please at least read the 1st page of the thread if not all of it (for user comments)
there is also an option to install the correct windows drivers and a tutorial for windows 8 (i'm on win7 x64)
Click to expand...
Click to collapse
tom9191 said:
I've tried different ports, different cables, different copmuters...I've read that a lot of people have this issue though, especially after upgrading to CM7...which was my case. Ever since I haven't been able to do it
Click to expand...
Click to collapse
omg...this is a puzzle (at least for me ,maybe some on can solve this in a snap,but it really seems complicated)
first, we need to resolved why smart flash won't recognize your device...than everything should go with no problems
---------- Post added at 11:19 PM ---------- Previous post was at 11:06 PM ----------
what color is INSTALL APX in aio toolkit...is it gray or is white like every thing else, when you connect phone?
if you have installed all drivers(lg united,nvflash drivers,apx,adb usb drivers...that is in tonyp basketbuild downloads in p990 staff-->various ) and if you are not did this: SU660 Users: Download Both P990 & SU660-AddOn packages. Run & extract the P990 first and then extract in the same folder the SU660-AddOn. AIO-Toolkit will be converted to support SU660 device
by mistake i really dont know where is problem...
Please help me out. I know I shouldn't have done it alone but it was tempting.
I already rooted my phone (Samsung Galaxy Note GT-N7000), and I was trying to install the PhilZ Recovery.
It said on my recovery menu that it was successful, and as I try to reboot my phone it does not show up the Samsung logo like it usually does. After the "Galaxy Note GT-N7000" screen" all it does is enter a black screen. I tried wiping all user data, cache, and Dalvik cache with the PhilZ recovery, but to no avail.
EDIT: It's on ICS 4.0.3
What can I do to restore it back to normal? I didn't flash any custom ROMs or anything, just the recovery. I just got my phone, and I don't want to have to wait to spend for another one. Please help, thanks.
3415 9985694
BTICETeKS said:
Please help me out. I know I shouldn't have done it alone but it was tempting.
Click to expand...
Click to collapse
If it's a new phone you shouldn't have too much data on it, so what I would do is just install a custom ROM (There are lot's of them out there for the N7000). Sounds like you can still boot into PhilZ and already wiped the device, so just copy the ROM and necessary files to the phone's SD and install away
You should charge your battery to at least 80% before fiddling with things like that I believe
BTICETeKS said:
Please help me out. I know I shouldn't have done it alone but it was tempting.
I already rooted my phone (Samsung Galaxy Note GT-N7000), and I was trying to install the PhilZ Recovery.
It said on my recovery menu that it was successful, and as I try to reboot my phone it does not show up the Samsung logo like it usually does. After the "Galaxy Note GT-N7000" screen" all it does is enter a black screen. I tried wiping all user data, cache, and Dalvik cache with the PhilZ recovery, but to no avail.
EDIT: It's on ICS 4.0.3
What can I do to restore it back to normal? I didn't flash any custom ROMs or anything, just the recovery. I just got my phone, and I don't want to have to wait to spend for another one. Please help, thanks.
Click to expand...
Click to collapse
You should mention the name of the file you flashed.....
nokiamodeln91 said:
You should mention the name of the file you flashed.....
Click to expand...
Click to collapse
I flashed PhilZ-cwm6-XXLS7-XJB-3.1.zip.
You flashed a JB kernel? Flash an ICS philz kernel to get it to boot up. Or install the rom again using Odin.
nokiamodeln91 said:
You flashed a JB kernel? Flash an ICS philz kernel to get it to boot up. Or install the rom again using Odin.
Click to expand...
Click to collapse
It was? Oh my God I should've looked it up...so that's why.
Where can I find the kernel that's fit for mine?
Sorry for my carelessness.
BTICETeKS said:
It was? Oh my God I should've looked it up...so that's why.
Where can I find the kernel that's fit for mine?
Sorry for my carelessness.
Click to expand...
Click to collapse
Look for it from Philz kernel thread in Original Android Dev section.
Sent from my GT-N7000 using Tapatalk 2
forest1971 said:
Look for it from Philz kernel thread in Original Android Dev section.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
But how do I know which is for my phone?
I don't understand how can I pick the kernel.
BTICETeKS said:
But how do I know which is for my phone?
I don't understand how can I pick the kernel.
Click to expand...
Click to collapse
In Philz main thread there is a topic "Update to all ICS 4.0.4 kernels from 3.71 ---> 3.99:"... these are 4.0.4 Kernels.. Try one of these and check if the phone boots up..
OR
As you have already done wipe data, you may also install a new custom rom like Aryamod...
You wrote that you just got the Note.
So why do you want to stay on ICS and try to install things you obviously do not understand - and risking your device?
Select an JB or KK Custom Rom, follow the specific installation instructions and be happy with your new-born device.
---------- Post added at 12:54 PM ---------- Previous post was at 12:52 PM ----------
nokiamodeln91 said:
...OR
As you have already done wipe data, you may also install a new custom rom like Aryamod...
Click to expand...
Click to collapse
Maybe two posts with the same intention will convince him...
ThaiDai said:
Maybe two posts with the same intention will convince him...
Click to expand...
Click to collapse
You know the drill....
nokiamodeln91 said:
You know the drill....
Click to expand...
Click to collapse
Hmm...
I do want to install CyanogenMod...
Will the latest stable release be compatible with PhilZ?
BTICETeKS said:
Hmm...
I do want to install CyanogenMod...
Will the latest stable release be compatible with PhilZ?
Click to expand...
Click to collapse
Go read the instruction from the rom thread that you want! better stay stock if you don't read or don't understand.
Sent from my GT-N7000 using Tapatalk 2
forest1971 said:
Go read the instruction from the rom thread that you want! better stay stock if you don't read or don't understand.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thanks. I'll have a look at it.
So I downloaded the stable version of CyanogenMod: "cm-10.1.3-n7000.zip"
Is it compatible with the recovery I have?
BTICETeKS said:
So I downloaded the stable version of CyanogenMod: "cm-10.1.3-n7000.zip"
Is it compatible with the recovery I have?
Click to expand...
Click to collapse
start reading and understanding the instructions yourself.
spoon-feeding a lazy baby. for my part I quit here.
ThaiDai said:
start reading and understanding the instructions yourself.
spoon-feeding a lazy baby. for my part I quit here.
Click to expand...
Click to collapse
Yeah, well, sorry.