Related
Upgraded my SGS stock 2.3.3 yesterday to CM9 nightly posted on 07-06-2012. I love the ROM, but the only problem is - i don't have any network signal on my phone. Wifi works. It seems to scan the mobile networks and registers also and creates APN connections automatically. But on selecting any of the networks, it shows the message: "unable to connect to this network at this time. Please try again later." The IMEI number shows up correctly. Using Vodafone India network.
I feel it should be just a minor setting somewhere that is missing...
Does anyone know how to make this work?
...or should i switch back to the stock ROM, and maybe later to CM7? I'm on Linux. Found XXJVU ROM in Heimdall format. Do i need to install clockwork again after installing XXJVU?
Thanks in advance.
Wipe again.Flash again.
hey! make a copy from the zip file of the ROM and replace the file (apns-conf.xml) which is uploaded here as a zip file with the file (apns-conf.xml) in this directory "System/etc". it worked for me and i wish it will work for u bro.
send me if it work with u or not.
Why you don´t install de modem from the your ROM stock 2.3.3 ( via Odin ) ?
I think the new modem ICS is not compatible with the system of their country.
Tell me how you solved your problem.
Sorry, for my poor English.
JCBG
You need to flash a Cm7/9 modem from here
http://forum.xda-developers.com/showthread.php?t=1158783
[CM7/MIUI/ICS/CM9][06.01.12] Modems + Bootloaders(MD5)
I had this problem and it was because my Efs folder was empty. I re-flashed GB and backed up Efs. Flashed cm9 again and restored Efs with root explorer rebooted and had service again. Hope I helped
Sent from my GT-I9000 using xda premium
thanks! i reflashed the stock GB XXJVU and now it works well. going to try the efs backup and restore this time. and if this doesn't work, will try the modem fix and the apn fix. will let you know how it works. though.. how to pick up the modem from the stock or how to pick up the appropriate CM7/CM9...
feb8born said:
thanks! i reflashed the stock GB XXJVU and now it works well. going to try the efs backup and restore this time. and if this doesn't work, will try the modem fix and the apn fix. will let you know how it works. though.. how to pick up the modem from the stock or how to pick up the appropriate CM7/CM9...
Click to expand...
Click to collapse
Here
http://forum.xda-developers.com/showthread.php?t=1158783
[CM7/MIUI/ICS/CM9][06.01.12] Modems + Bootloaders(MD5)
went back to stock 2.3.6 and then wiped and tried again in the beginning of this month.. at first it got stuck in the bootloop, then wiped and reflashed again and now cm9 nightlies work well.
Tried but did not worked...
Chappac said:
I had this problem and it was because my Efs folder was empty. I re-flashed GB and backed up Efs. Flashed cm9 again and restored Efs with root explorer rebooted and had service again. Hope I helped
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Before upgrading I had taken the back up of EFS Pro application, after upgrading since EFS Pro was not detecting my mobile. I had installed root explorer on my mobile and copied the EFS data into /efs folder but it did not helped.
Hey guys before I had 2.3 and I had used an SGS unlocker off the market store to extract my nv_data.bin, I then used the samsung tool unlock code generator, when I used this I remember it unlocking my phone. I'm now running a custom JB rom and my network isn't working at all and when I search for it, it says "error while searching for network" I tried using the same method as last time to do it, i deleted my old nv_data and its just erroring in the samsung unlock tool. It's not asking for an unlock code or anything either What can I do guys
http://forum.xda-developers.com/showthread.php?t=1731931
blasteryui said:
I'm now running a custom JB rom and my network isn't working at all
Click to expand...
Click to collapse
check your IMEI and get solution from My Android Solutions
to solve it
xsenman said:
check your IMEI and get solution from My Android Solutions
to solve it
Click to expand...
Click to collapse
I really can't figure this out I'm pretty much a noob at this to be honest. Is there anyway you could help me out a bit more, i really need this fixed.
blasteryui said:
I really can't figure this out I'm pretty much a noob at this to be honest. Is there anyway you could help me out a bit more, i really need this fixed.
Click to expand...
Click to collapse
type *#06# in your phone dialer for IMEI number of your phone, if it start with 000 or missing, read this http://forum.xda-developers.com/showthread.php?t=1857054
to solve it IF this happens after you flashed CM 10
Solution:- Reason is you had Jumped from GB to JB (should be on ICS before JB), so now you need to
1) Download Root Explorer from Play Store and use it to
2) Search you internal SD card for sdcard/backup/efs
3) Copy nv_data.bin, nv_data.bin.md5 and nv.log paste them into /efs in your Phone memory
4) Reboot to get back your original IMEI
or
you can start from the beginning.. go back to GB 2.36 (use a JVU ROM + Root, upgrade to ICS CM 9 and than to CM10
Solution for i9000 on JB:-Try not to jump from Gingerbread to Jellybean, as all upgrades should be done progressively. meaning you need to be on a GB 2.3.6> than into ICS and finally into JB.
For others, like missing IMEI, NO service, NO network problems, scroll down to EFS problems and Solutions in link given earlier
xsenman said:
type *#06# in your phone dialer for IMEI number of your phone, if it start with 000 or missing, read this http://forum.xda-developers.com/showthread.php?t=1857054
to solve it IF this happens after you flashed CM 10
Solution:- Reason is you had Jumped from GB to JB (should be on ICS before JB), so now you need to
1) Download Root Explorer from Play Store and use it to
2) Search you internal SD card for sdcard/backup/efs
3) Copy nv_data.bin, nv_data.bin.md5 and nv.log paste them into /efs in your Phone memory
4) Reboot to get back your original IMEI
or
you can start from the beginning.. go back to GB 2.36 (use a JVU ROM + Root, upgrade to ICS CM 9 and than to CM10
Solution for i9000 on JB:-Try not to jump from Gingerbread to Jellybean, as all upgrades should be done progressively. meaning you need to be on a GB 2.3.6> than into ICS and finally into JB.
For others, like missing IMEI, NO service, NO network problems, scroll down to EFS problems and Solutions in link given earlier
Click to expand...
Click to collapse
I don't have a backup EFS I tried that method? What else can i do. My EMI wouldn't show and under about my phone my baseband is ???? It sounds like I need to go to stock firmware.. where would I get my stock, this phone was Virgin/Bell I9000 Model.
blasteryui said:
I don't have a backup EFS I tried that method? What else can i do. My EMI wouldn't show and under about my phone my baseband is ???? It sounds like I need to go to stock firmware.. where would I get my stock, this phone was Virgin/Bell I9000 Model.
Click to expand...
Click to collapse
try My Android Collections have you Search you internal SD card for sdcard/backup/efs
xsenman said:
try My Android Collections have you Search you internal SD card for sdcard/backup/efs
Click to expand...
Click to collapse
what am i trying in the collection and what do i do exactly.. and i dont have a backup folder in sdcard.
blasteryui said:
what am i trying in the collection and what do i do exactly.. and i dont have a backup folder in sdcard.
Click to expand...
Click to collapse
flash a JVU + Root with a 512 Pit File using Odin or use a rescue kit to downgrade to Gingerbread 2.3.6 to get back your IMEI and baseband
xsenman said:
flash a JVU + Root with a 512 Pit File using Odin or use a rescue kit to downgrade to Gingerbread 2.3.6 to get back your IMEI and baseband
Click to expand...
Click to collapse
I'm still a bit confused friend, I've gone to the sammyfirmware site and I'm downloading the offical 2.3.3 UGKG3 rom, can I just put that on my phone and flash the .zip? If not, where can I get those 3 files above you mentioned, or would it be easier to use this "rescue kit" sorry I'm unfamiliar with most of thing. I didn't think upgrading was going to cause this problem at all. Really appreciate the help. I was going to try Kies but when I plug my phone in the only option i have is to turn on the usb?
blasteryui said:
I'm still a bit confused friend, I've gone to the sammyfirmware site and I'm downloading the offical 2.3.3 UGKG3 rom, can I just put that on my phone and flash the .zip? If not, where can I get those 3 files above you mentioned, or would it be easier to use this "rescue kit" sorry I'm unfamiliar with most of thing. I didn't think upgrading was going to cause this problem at all. Really appreciate the help. I was going to try Kies but when I plug my phone in the only option i have is to turn on the usb?
Click to expand...
Click to collapse
were you originally on a 2.3.3 UGKG3?? anyway the procedure for upgrade is you need a 2.3.6 bootloader with CWM , than into CM 9 and finally into CM 10...to avoid having problems
xsenman said:
were you originally on a 2.3.3 UGKG3?? anyway the procedure for upgrade is you need a 2.3.6 bootloader with CWM , than into CM 9 and finally into CM 10...to avoid having problems
Click to expand...
Click to collapse
Yes i believe i was on 2.3.3.. so what do I do to get back there to get the network to work again?
blasteryui said:
Yes i believe i was on 2.3.3.. so what do I do to get back there to get the network to work again?
Click to expand...
Click to collapse
ok follow this ...will upgrade you to ICS, after that you can upgrade to JB
xsenman said:
ok follow this ...will upgrade you to ICS, after that you can upgrade to JB
Click to expand...
Click to collapse
Hey i just need to get my network working, how would I just get back to 2.3.3, I can look into getting into ics after, or i might no even bother i just need to get this network working again lol. I believe i'm flashing it back to stock now.. ill let you know what happens
blasteryui said:
Hey i just need to get my network working, how would I just get back to 2.3.3, I can look into getting into ics after, or i might no even bother i just need to get this network working again lol.
Click to expand...
Click to collapse
just follow that guide to flashing the UGKG3 ROM with the 512 PIT file ( this Rom is used on i9000M, whereas the JVU ROM, I asked you and gave you link for is for i9000)
It seems you may need pictures, lol...so that why I sent you that web site
xsenman said:
just follow that guide to flashing the UGKG3 ROM with the 512 PIT file ( this Rom is used on i9000M, whereas the JVU ROM, I asked you and gave you link for is for i9000)
It seems you may need pictures, lol...so that why I sent you that web site
Click to expand...
Click to collapse
Lol, I reply before I even bother looking and then I end up finding the same answer, just trying to rush because it's not my phone. I'll attempt at ICS after, network is asking for an unlock code.. so now I could do what I did before to unlock it. Should I just go to ICS now and then unlock it?
blasteryui said:
Lol, I reply before I even bother looking and then I end up finding the same answer, just trying to rush because it's not my phone. I'll attempt at ICS after, hope going back to 2.3.3 fixes the network.
Click to expand...
Click to collapse
it should, just follow the picture you can download the files from the first link
xsenman said:
it should, just follow the picture you can download the files from the first link
Click to expand...
Click to collapse
Read my reply again,
blasteryui said:
Lol, I reply before I even bother looking and then I end up finding the same answer, just trying to rush because it's not my phone. I'll attempt at ICS after, network is asking for an unlock code.. so now I could do what I did before to unlock it. Should I just go to ICS now and then unlock it?
Click to expand...
Click to collapse
up to you, which ever is convenient for you
xsenman said:
up to you, which ever is convenient for you
Click to expand...
Click to collapse
Okay, everything works great now, on ics. How would I upgrade to JB safely lol? To unlock I used SGS unlock pro
blasteryui said:
Okay, everything works great now, on ics. How would I upgrade to JB safely lol? To unlock I used SGS unlock pro
Click to expand...
Click to collapse
just backup your EFS folder and flash following the guide from that chosen JB ROM
Hello,
I have a Samsung Galaxy S with 2.3.3 Gingerbread. I never rooted it so look for step-by-step guide to install 4.1.X. I will appreciate any help on that.
Thanks,
Can
Here is it http://forum.xda-developers.com/showthread.php?t=1494493, just skip this part:
4. Connect phone to PC via USB Cable and open Odin (windows should detect the phone and install some drivers, after it`s finished you should see the message "Added!" in Odin which means Odin succesfully detected your phone so now you are ready to flash)>check Re-Partition Option>press PIT button and browse for the s1_odin_20100512.pit file, press BOOTLOADER button and browse for the APBOOT… file, press PDA button and browse for the CODE….file, press PHONE button and browse for the MODEM….file, press CSC button and browse for the GT-I9000-CSC….file. PRESS START button and wait for the green pass notification in Odin
Click to expand...
Click to collapse
It works for JB too, after finishing it, if you had problems with IMEI do this:
1) Download Root Explorer from Play Store and use it to
2) Search you internal SD card for sdcard/backup/efs
3) Copy nv_data.bin, nv_data.bin.md5 and nv.log paste them into /efs in your Phone memory
4) Reboot to get back your original IMEI
or
you can start from the beginning.. go back to GB 2.36 (use a JVU ROM + Root, upgrade to ICS CM 9 and than to CM10
Solution for i9000 on JB:-Try not to jump from Gingerbread to Jellybean, as all upgrades should be done progressively. meaning you need to be on a GB 2.3.6> than into ICS and finally into JB.
For others, like missing IMEI, NO service, NO network problems, scroll down to EFS problems and Solutions
Click to expand...
Click to collapse
ramy670 said:
Here is it http://forum.xda-developers.com/showthread.php?t=1494493, just skip this part:
It works for JB too, after finishing it, if you had problems with IMEI do this:
Click to expand...
Click to collapse
I managed to install 4.1.1 JB but now cannot pass CWM mode and boot the device... Any idea?
Can you take a photo of the screen you're stucked at?
ramy670 said:
Can you take a photo of the screen you're stucked at?
Click to expand...
Click to collapse
When i finished the install, i rebooted. Now my phone is booting into CWM only and cannot pass that...
hello!! my sgs i9000 is currently rooted with GB rom (2.3.4. surface rom) and semaphore 1.5.
can i flash from internal SDcard straight to some JB rom ? (like hellybean or c-rom mix)
i dont want to use odin at all : it has never flashed my sgs successfully on the first try, it always need 3 or 4 attempts and i'd like to avoid that step as much as possible, cause im on old GB already.
so hellybean installation guide,for the example, says:
- make sure to have gingerbread bootloaders (<- this step should be done since im on a GB rom, correct me if im wrong)
- flash allinone.zip
- reboot recovery
- flash allinone.zip again
- flash gapps
i have a backup of EFS folder and i'll wipe everything, also should i revert filesystems to rfs before flashing, or will ext4 work too? maybe that point is not important because of partitions being changed (i dont know...).i know there are tons of installation guides but i cant browse everything. so if i just do it like that way will it be ok?? sounds too good to be true. what do you think?
dimsoron said:
When i finished the install, i rebooted. Now my phone is booting into CWM only and cannot pass that...
Click to expand...
Click to collapse
It can be that u have 2 flash custom 2 or 3 times
Just like Donovan662 said, sorry I thought that you've read that in ROM's thread. Actually you need to do it from 2 to 4 times, depending on what ROM you are installing.
kaott said:
hello!! my sgs i9000 is currently rooted with GB rom (2.3.4. surface rom) and semaphore 1.5.
can i flash from internal SDcard straight to some JB rom ? (like hellybean or c-rom mix)
i dont want to use odin at all : it has never flashed my sgs successfully on the first try, it always need 3 or 4 attempts and i'd like to avoid that step as much as possible, cause im on old GB already.
so hellybean installation guide,for the example, says:
- make sure to have gingerbread bootloaders (<- this step should be done since im on a GB rom, correct me if im wrong)
- flash allinone.zip
- reboot recovery
- flash allinone.zip again
- flash gapps
i have a backup of EFS folder and i'll wipe everything, also should i revert filesystems to rfs before flashing, or will ext4 work too? maybe that point is not important because of partitions being changed (i dont know...).i know there are tons of installation guides but i cant browse everything. so if i just do it like that way will it be ok?? sounds too good to be true. what do you think?
Click to expand...
Click to collapse
God you've made installing new ROM looks like walking on water.. , here are your answers:
1-You don't need Odin.
2-Yes if you have ClockWorkMod you can install new JB ROM.
3-You don't have to convert file system.
4-If you had problems with IMEI check quoted post in my first comment.
ramy670 said:
Just like Donovan662 said, sorry I thought that you've read that in ROM's thread. Actually you need to do it from 2 to 4 times, depending on what ROM you are installing.
Click to expand...
Click to collapse
It seems I am screwed. I forgot to backup EFS folder and IMEI is now lost. Even worse, i do not remember with which ROM my phone was shipped. No idea how to go from here... Any advice?
@dimsoron
In my case I didn't back up anything, yet I found efs folder in sdcard/backup/efs, so check it first and see what you have, and about the ROM version, it doesn't matter, you can flash any stock ROM even if it's region doesn't match yours, but I'm not sure if that can resolve IMEI problem.
---------- Post added at 06:34 PM ---------- Previous post was at 06:24 PM ----------
but I'm not sure if that can resolve IMEI problem.
Click to expand...
Click to collapse
It turned out it DOES solve the problem. Actually I've never read what's after "or" in restoring IMEI mini giude until now.
ramy670 said:
@dimsoron
In my case I didn't back up anything, yet I found efs folder in sdcard/backup/efs, so check it first and see what you have, and about the ROM version, it doesn't matter, you can flash any stock ROM even if it's region doesn't match yours, but I'm not sure if that can resolve IMEI problem.
Click to expand...
Click to collapse
Wow. I found efs and efs-466 under backup folder. What is the difference?
And how can i restore from that?
Hmmm..I have no idea what's the difference between them, but if I can recall right you only need the efs file, and how you do that is mentioned in quoted post in my first comment.
ramy670 said:
Hmmm..I have no idea what's the difference between them, but if I can recall right you only need the efs file, and how you do that is mentioned in quoted post in my first comment.
Click to expand...
Click to collapse
I copied. Device complains that No SIM card. I recognized IMEI is fine now but my phone number is displayed as "unknown". What can the reason be?
Well I didn't go through this before, but I'm sure a lot of members here did and they'll tell you what to do as soon as they see your post, but don't worry since your problem is software related the solution would be relatively easy to apply, you can still flash stock ROM anytime with Odin, but make sure to stop KIES before you do it.
Have a look here also:
http://forum.xda-developers.com/showthread.php?p=30415128#post30415128
To avoid the loss of your IMEI please flash teamhacksungs CM9 build 16 twice before start to flash JB ROMs.
Sent from my Gameboy Color
flashed helly bean it worked flawlessly.
straight from 2.3.4 to 4.1.2.
Hi,
I'm pretty new to the whole custom ROM scene and have come across a problem when installing CynogenMod version 10.1.3-RC2-galaxysmtd. I've been able to get everything else working but can't seem to get any network service or GPS.
I've read numerous articles on flashing a correct radio or installing a new modem (not sure if this is the same thing or not?) if you can't get any service but haven't done this yet. I've also read articles on moving the files from sdcard\backup\efs into the efs folder in the phone memory which I've tried but doesn't seem to work either.
My baseband version is I9000XXJVT and the rom is running on android 4.2.2. Before the ROM I'm currently on I came from a stock Gingerbread ROM. Was there something I needed to do when coming from a stock ROM that I missed?
Any help on this would be appreciated as I've hit a bit of brick wall
Thanks
Hey there,
So long story short, you've probably lost your IMEI. You can check this by going into Settings -> About Phone -> Status then scrolling down to IMEI. If it begins with 044 or something similar then you know you've lost it.
So to solve this:
1. Flash back to the stock Gingerbread you were on by means of Odin, there are many guides for this but the one http://forum.xda-developers.com/showthread.php?t=2444308 is quite comprehensive (and leave the OP a thanks as well)
2. Download CM9 from the Cyanogenmod website.
3 Root your S again (this will depend on which Gingerbread rom you flash).
4. Boot into CWM recovery. Do the usual data/cache/Dalvik wipes.
5. Install CM9. Let it boot. You don't need to download ICS gapps for CM9 as all you need it to do is boot.
The reason why you install CM9 is to make sure that the IMEI sticks when you then flash a JB rom. Flashing straight to JB from GB tends to lose the IMEI as said before.
6. Once you've let it boot, reboot into recovery again. You don't really need to do the same three wipes again. Install CM10.1.3 RC2. You'll need to flash the zip a few times- three times at least. Flash Gapps as well, of course.
That should hopefully make your signal reception and GPS work
(I covered this quite briefly so if you do need clarification on any of the steps don't hesitate to ask)
Sent from my GT-P7510 using Tapatalk HD
Hi
I checked and I do have an IMEI number which begins with 3 not 0. I also checked the IMEI number and it brought back the correct phone details.
Should I still follow the guid you have linked to or do I not need to do that?
Thanks.
Odd... If the IMEI is intact then you should be geting reception. What you could do is make a backup of your rom and then try the steps I suggested to see if you get the same problem.
Most likely however its due to your modem. In the development thread there's a list of modems compatible with the I9000. Try flash XXJW4 or one for your country through recovery and see if that fixes anything- if not, try the steps.
Sent from my GT-P7510 using Tapatalk HD
I have samsung galaxy note i717d , ihad install jb rom of At&t after installing jb rom my network provider name is showing on notification bar but im not getting any signal...what is the problem please help me out..
nniirraavv said:
I have samsung galaxy note i717d , ihad install jb rom of At&t after installing jb rom my network provider name is showing on notification bar but im not getting any signal...what is the problem please help me out..
Click to expand...
Click to collapse
Wrong forum, find the AT&T Galaxy Note forum and they should have answers there
Sent from my SM-N910U using Tapatalk
i9305 Imei shows null/null after flashing I9305XXUFNL1_DBTFNL1 which was a stock rom
Also no signal as you would guess
Now I cant even downgrade to any roms apart from 4.4.4.
Phoen is rooted and tried 4.1.1. I9305XXALI5_I9305EVRALI5_I9305BVALI5 through Odin and Mobile ODIN
On Mobile odin phone looks like its working then stays on the SAMSUNG Logo for ages and nothing, just stays there
I have a Back up of an efs which I done through Rom Manager but not sure if its corrupted or how to restore it
If someone coud give me a walkthrough :highfive:
EwOkie said:
i9305 Imei shows null/null after flashing I9305XXUFNL1_DBTFNL1 which was a stock rom
Also no signal as you would guess
Now I cant even downgrade to any roms apart from 4.4.4.
Phoen is rooted and tried 4.1.1. I9305XXALI5_I9305EVRALI5_I9305BVALI5 through Odin and Mobile ODIN
On Mobile odin phone looks like its working then stays on the SAMSUNG Logo for ages and nothing, just stays there
I have a Back up of an efs which I done through Rom Manager but not sure if its corrupted or how to restore it
If someone coud give me a walkthrough :highfive:
Click to expand...
Click to collapse
Hi,
About IMEI null/null with 4.4.4 firmware, you should search in this Q/A forum, there a lot of threads asking for this issue. Maybe you should get an answer yourself
However, you should try again to do a clean flash of latest official 4.4.4 firmware with ODIN v3.09 by following this GUIDE HERE from @MaHo_66.
AFAIK, it's impossible to downgrade from 4.4.4 because of KNOX bootloader. It has been said many times in this Q/A forum. Maybe it exists somewhere a tricky trick to do it but I'm not aware of this.
FLooDW said:
Hi,
About IMEI null/null with 4.4.4 firmware, you should search in this Q/A forum, there a lot of threads asking for this issue. Maybe you should get an answer yourself
However, you should try again to do a clean flash of latest official 4.4.4 firmware with ODIN v3.09 by following this GUIDE HERE from @MaHo_66.
AFAIK, it's impossible to downgrade from 4.4.4 because of KNOX bootloader. It has been said many times in this Q/A forum. Maybe it exists somewhere a tricky trick to do it but I'm not aware of this.
Click to expand...
Click to collapse
In Addition to @FLooDW 's answer:
Try to use Philz 6.48.4 or 6.59.0 as your recovery rather then TWRP or the old CWM (6.0.4.7), especially DON'T use the latest TWRP from their official website, its a broken build and its known to mess up the partitions! That could be your problem if you have done that before...
Any recovery you want to use, download from my RECOVERY/GUIDE thread that FLooDW linked to you, use those they work fine.
PS. before flashing official firmware with ODIN, make sure you have a custom recovery installed, then boot into recovery, wipe system/data/cache/dalvik-cache/internalSD/boot/modem etc. this is to ensure when you have flashed the firmware, there is nothing left from the previous firmware that was installed.
Note: when explaining your issue, try to do that by providing as much as possible info about your actions before and after the problem occured, that way anyone who wants to help can help you the best way possible.
MaHo_66 said:
In Addition to @FLooDW 's answer:
Try to use Philz 6.48.4 or 6.59.0 as your recovery rather then TWRP or the old CWM (6.0.4.7), especially DON'T use the latest TWRP from their official website, its a broken build and its known to mess up the partitions! That could be your problem if you have done that before...
Any recovery you want to use, download from my RECOVERY/GUIDE thread that FLooDW linked to you, use those they work fine.
PS. before flashing official firmware with ODIN, make sure you have a custom recovery installed, then boot into recovery, wipe system/data/cache/dalvik-cache/internalSD/boot/modem etc. this is to ensure when you have flashed the firmware, there is nothing left from the previous firmware that was installed.
Note: when explaining your issue, try to do that by providing as much as possible info about your actions before and after the problem occured, that way anyone who wants to help can help you the best way possible.
Click to expand...
Click to collapse
Really helpful addition !
Trying what you guys have mentioned just now, let you know as soon as :good:
What 4.4.4. om do you suggest?
Also the efs I backed up (not sure if its working or not as it was with Rom Manager)
How do I restore, can it be done with root explorer?
Tried the [ROM][i9305][18.10.15]>>>4.4.4<<<[KK][STOCK][TW][STABLE][+AROMA] S5 Elite Lite v4.0
which I posted a few days ago, left a post with no reply and thats when I started getting the null/null
PSN_AGNi_pureSTOCK-v5.9.5-4.4.x_I9305_AROMA
Currently trying this rom.. watching the installation set up and says so far that set_perm: some changes failed
used philz_touch_6.59.0-i9305
Rebooting and stays on Samsung Galaxy boot screen ??
EwOkie said:
PSN_AGNi_pureSTOCK-v5.9.5-4.4.x_I9305_AROMA
Currently trying this rom.. watching the installation set up and says so far that set_perm: some changes failed
used philz_touch_6.59.0-i9305
Rebooting and stays on Samsung Galaxy boot screen ??
Click to expand...
Click to collapse
AGNi is not a ROM, this is a kernel. Did you flash AGNi kernel over official Samsung firmware ?
As MaHo_66 said, you have to explain more what you have done and what you need if you want us to help you.
Steps :
reflashed a Stock Rom then Rooted it then added Philz Recovery
Then Tried this rom : I9305XXUFNL1_O2UFOB1_4.4.4_KK.zip
Currently trying various modems to see what this gives me
Failing this will need to try QPTS or EFS Professional again.
* I know how to flash and root roms if you look at my signature along with kernels I am basically telling you what I have tried to get
this null/null away as I think its a baseband/modem issue somewhere as I have read various posts and some people agree.
Cant even do the *#197328640# or *#*#197328640#*#* to get into certain modes
Thinking it maybe the sim card slot now .......... I am losing my mind now!
EwOkie said:
Steps :
reflashed a Stock Rom then Rooted it then added Philz Recovery
Then Tried this rom : I9305XXUFNL1_O2UFOB1_4.4.4_KK.zip
Currently trying various modems to see what this gives me
Failing this will need to try QPTS or EFS Professional again.
* I know how to flash and root roms if you look at my signature along with kernels I am basically telling you what I have tried to get
this null/null away as I think its a baseband/modem issue somewhere as I have read various posts and some people agree.
Cant even do the *#197328640# or *#*#197328640#*#* to get into certain modes
Thinking it maybe the sim card slot now .......... I am losing my mind now!
Click to expand...
Click to collapse
There are few other possible solutions you could try:
- try this, it shows you how to get in service mode and the restoring of the golden efs backup, that should be present if its good.
If above doesnt work, then try the one below.
- have you tried to flash the param_bin file? if not try that with ODIN, it might work.. file attached.
Let us know how it goes.
H yes tied that file and didnt work
will the imei work from another phone or efs?
isnt that link just gps?