Database Develop

stock rom download?

I've installed CM7 but when I wanted to recover to my originele sense 3 rom, the phone would not boot. So my question is if I can download the stock rom from my Incredible S?

Method01 said:
I've installed CM7 but when I wanted to recover to my originele sense 3 rom, the phone would not boot. So my question is if I can download the stock rom from my Incredible S?
Click to expand...
Click to collapse
yes you can. however your bootloader will change.so are you s-off by xtc clip or software hack?
here are the roms:
http://forum.xda-developers.com/showthread.php?t=1033922

ajeya said:
yes you can. however your bootloader will change.so are you s-off by xtc clip or software hack?
here are the roms:
http://forum.xda-developers.com/showthread.php?t=1033922
Click to expand...
Click to collapse
Thanks. Which one i have to choose? Bought it in Europe and it is unbranded
I did it like here:
http://forum.xda-developers.com/showthread.php?t=1337105
And for going back to the stock rom, do I need to flash some things again or is it just factory reset + install from zip file?
http://forum.xda-developers.com/showpost.php?p=18079795&postcount=1 so that is the method to get the phone
back like new?
Or is it this topic I have to follow: http://forum.xda-developers.com/showthread.php?t=1359555

Gave it a try.. Wit the RUU method it always gave an error on my desktop and a security and update fail on my phone
So i copied the PG32IMG.zip on my sdcard and bootloader found the file.
Then in the right top corner is see some kind of status bar en when it is full, nothing happens. The phone didn't ask for any update.
What now

nobody who can help plz?

Method01 said:
Gave it a try.. Wit the RUU method it always gave an error on my desktop and a security and update fail on my phone
So i copied the PG32IMG.zip on my sdcard and bootloader found the file.
Then in the right top corner is see some kind of status bar en when it is full, nothing happens. The phone didn't ask for any update.
What now
Click to expand...
Click to collapse
OK, in reading through your posts, it sounds like you currently have HBOOT version 2.00.0000 Unlocked on your phone. That version is not going to let you install an older RUU/PG32IMG.zip file. You will have to flash the Sense 3.0 /3.08.405.3 RUU to get rid of CM7.

tpbklake said:
OK, in reading through your posts, it sounds like you currently have HBOOT version 2.00.0000 Unlocked on your phone. That version is not going to let you install an older RUU/PG32IMG.zip file. You will have to flash the Sense 3.0 /3.08.405.3 RUU to get rid of CM7.
Click to expand...
Click to collapse
That's correct.
I used the P32IMG.zip from:
RUU_VIVO_SENSE30_S_HTC_WWE_3.08.405.3_Radio_20.4802.30.0822U_3822.10.08.28_M_release_227170_signed.exe
That is already the right one, not?
When I use the RUU installer on pc it says I'll update from image version 2.30.405.1 to 3.08.405.3
c:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0000
(bootloader) version-baseband: 3822.10.08.28_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.08.405.3
(bootloader) serialno: HT12TTD09339
(bootloader) imei: 355301040658406
(bootloader) product: vivo
(bootloader) platform: HBOOT-7630
(bootloader) modelid: PG3213000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 3768mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-af9874be
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse

Method01 said:
That's correct.
I used the P32IMG.zip from:
RUU_VIVO_SENSE30_S_HTC_WWE_3.08.405.3_Radio_20.4802.30.0822U_3822.10.08.28_M_release_227170_signed.exe
That is already the right one, not?
When I use the RUU installer on pc it says I'll update from image version 2.30.405.1 to 3.08.405.3
Click to expand...
Click to collapse
Yes that is the right one. Everything looks good.

tpbklake said:
Yes that is the right one. Everything looks good.
Click to expand...
Click to collapse
Strange thing is that I always tried with that one and it didn't update..

Method01 said:
Strange thing is that I always tried with that one and it didn't update..
Click to expand...
Click to collapse
OK, since you have the HBOOT in an UNLOCKED state, the PG32IMG.zip/RUU will not update. You need to go into FASTBOOT mode and relock the HBOOT and then you can flash the PG32IMG.zip file.
Here's a link:
http://rootzwiki.com/topic/9322-how-to-relocked-hboot-htc-root-method/

tpbklake said:
OK, since you have the HBOOT in an UNLOCKED state, the PG32IMG.zip/RUU will not update. You need to go into FASTBOOT mode and relock the HBOOT and then you can flash the PG32IMG.zip file.
Here's a link:
http://rootzwiki.com/topic/9322-how-to-relocked-hboot-htc-root-method/
Click to expand...
Click to collapse
it worked!
thank you very much !

[Q] I need help about turning back to the default ROM.

Hi everybody!
My IS has been unlocked from htcdev.com and currently uses Jelly Bean ROM form Nik. So unhappy that there's a problems with my camera and I need to maintain it, just bought it 10 days ago. So I wanna back to the origin ROM. I have read many topics but there's no topic about it in this HTC IS tab. I have known that:
+ Download the ROM ( RUU of something like that, I know what it really is) has radio the same with the one appears in the boot-launcher mode.
+ Flash ROM by using .exe may brock the phone .
+ We must use another way. And I don't know how to do this. Just like we must unrar the .exe, use .img and re-lock the phone or un-root.
Anybody who knows clearly about this problems pls give me some advice.
Thanks for advance. :fingers-crossed:
I'm so sorry if this is about spamming but I'm now so stressful (.

why dont you install Nik's Project X v4.1? that is a good ICS sense 4 rom. Camera and video and everything else works properly in that ROM.

abc_8989 said:
Hi everybody!
My IS has been unlocked from htcdev.com and currently uses Jelly Bean ROM form Nik. So unhappy that there's a problems with my camera and I need to maintain it, just bought it 10 days ago. So I wanna back to the origin ROM. I have read many topics but there's no topic about it in this HTC IS tab. I have known that:
+ Download the ROM ( RUU of something like that, I know what it really is) has radio the same with the one appears in the boot-launcher mode.
+ Flash ROM by using .exe may brock the phone .
+ We must use another way. And I don't know how to do this. Just like we must unrar the .exe, use .img and re-lock the phone or un-root.
Anybody who knows clearly about this problems pls give me some advice.
Thanks for advance. :fingers-crossed:
I'm so sorry if this is about spamming but I'm now so stressful (.
Click to expand...
Click to collapse
You simply need to locate the RUU that matches the one you had when you unlocked your phone at HTCDEV.com.
Then relock the bootloader and run the RUU and you should be good to go.
If you put the phone in FASTBOOT USB mode and then enter and post the results of this command:
fastboot getvar all
we can help you identify the RUU you should use.

I'm Asian and here my radio : 3831.18.00.11_M. There are 2 files in the filefactory folder, the follow link RUU out there. I downloaded WWE one.
SO I must put the .exe file into the folder which I created for unlocking phone?

tpbklake said:
You simply need to locate the RUU that matches the one you had when you unlocked your phone at HTCDEV.com.
Then relock the bootloader and run the RUU and you should be good to go.
If you put the phone in FASTBOOT USB mode and then enter and post the results of this command:
fastboot getvar all
we can help you identify the RUU you should use.
Click to expand...
Click to collapse
Sry to interrupt.
Please tell me which RUU do I need ?
Mine is as follow.
version: 0.5
version-bootloader: 2.02.0002
version-baseband: 3831.18.00.11_M
version-cpld: None
version-microp: None
version-main: 2.32.1010.1
serialno: HT18KTD01750
imei: 358000042821874
product: vivo
platform: HBOOT-7630
modelid: PG3213000
cidnum: HTC__A07
battery-status: good
battery-voltage: 4132mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: d41e50e7
hbootpreupdate: 12
gencheckpt: 0
thank u.

OMG... I don't know how to collect all of this info. I unlocked phone at Fastboot, the same hbooy with you. But what do u mean about which ROM I need? I think that one phone has olny one RUU. Sr for my english if it too meaning.

abc_8989 said:
I'm Asian and here my radio : 3831.18.00.11_M. There are 2 files in the filefactory folder, the follow link RUU out there. I downloaded WWE one.
SO I must put the .exe file into the folder which I created for unlocking phone?
Click to expand...
Click to collapse
No, you can now execute this file from any directory. It is a program that will guide you through the process of flashing this ROM.

Sorry dude. Why don't you simply flash We Want ICS by Nik?
It will be as having a rooted phone with the stock rom, ICS/Sense 3.6.
It's the simplest manner and the ROM wont let you disapponted...
Sent from my Incredible S using xda app-developers app

But I want to come back to the default ROM because my camera has been broken and I need to maintain it at HTC. They will not maintain it if it is a rooted and unlocked phone.

When you say your camera is broken do you mean physical damage?
If your camera isn't working on the current JB ROM, thats a knows issue.
Even I would suggest flashing Nik's We Want ICS. It is like an optimised version of the stock. Most chances are that your camera should work. Flashing it should be easy-peasy. If your camera still doesn't work we could help you revert to Stock.

My advise is to flash a rom that has working camera drivers such as Project x4.1.
If the camera still not works properly lock your phone and install the RUU you need.

Yes, Its a physical damage. And I need to maintain it at HTC service. That's why I need to go back to the default ROM.

tpbklake said:
You simply need to locate the RUU that matches the one you had when you unlocked your phone at HTCDEV.com.
Then relock the bootloader and run the RUU and you should be good to go.
If you put the phone in FASTBOOT USB mode and then enter and post the results of this command:
fastboot getvar all
we can help you identify the RUU you should use.
Click to expand...
Click to collapse
abc_8989 said:
Yes, Its a physical damage. And I need to maintain it at HTC service. That's why I need to go back to the default ROM.
Click to expand...
Click to collapse
So you never did respond with this information to help you pick the correct RUU. Must have gotten lost in all of the 'why not flash a custom ROM' posts, huh?

abc_8989 said:
Yes, Its a physical damage. And I need to maintain it at HTC service. That's why I need to go back to the default ROM.
Click to expand...
Click to collapse
Sorry to say you but when you give ur phone to HTC guy they will know that your warranty is void because even if you flash ruu and lock ur bootloader again u will see the the status "RELOCKED" instead of "LOCK" in hboot mode.
Sent from my HTC Incredible S using xda premium

OMG, so soooooo sad about that (. Thank all you guys for helping me, but there's still a way for me to install ROMfor mr to sell the phone for the "comfortable" price?

bhaumik555 said:
Sorry to say you but when you give ur phone to HTC guy they will know that your warranty is void because even if you flash ruu and lock ur bootloader again u will see the the status "RELOCKED" instead of "LOCK" in hboot mode.
Sent from my HTC Incredible S using xda premium
Click to expand...
Click to collapse
That's not always true. Unless you take it to them with a software issue they generally dont bother with checking hboot and stuff.
I got my Incredible S repaired (it had a malfunctioning earpiece) even if my hboot said Relocked.

Hi! i did the fastboot getvar all, anyone can help me, what RUU do i need?
(i wast stock rom too)
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.02.
(bootloader) version-baseband: 3831.18
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.10.405.1
(bootloader) serialno: HT12VTD11274
(bootloader) imei: xxxxxxxxxxxxxxxxxx
(bootloader) product: vivo
(bootloader) platform: HBOOT-7630
(bootloader) modelid: PG3213000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4073mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: d41e
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0

szuladam said:
Hi! i did the fastboot getvar all, anyone can help me, what RUU do i need?
(i wast stock rom too)
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.02.
(bootloader) version-baseband: 3831.18
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.10.405.1
(bootloader) serialno: HT12VTD11274
(bootloader) imei: XXXXXXXXXXXXXX
(bootloader) product: vivo
(bootloader) platform: HBOOT-7630
(bootloader) modelid: PG3213000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4073mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: d41e
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Never show your IMEI number while posting info about your phone.:angel:

abc_8989 said:
Hi everybody!
My IS has been unlocked from htcdev.com and currently uses Jelly Bean ROM form Nik. So unhappy that there's a problems with my camera and I need to maintain it, just bought it 10 days ago. So I wanna back to the origin ROM. I have read many topics but there's no topic about it in this HTC IS tab. I have known that:
+ Download the ROM ( RUU of something like that, I know what it really is) has radio the same with the one appears in the boot-launcher mode.
+ Flash ROM by using .exe may brock the phone .
+ We must use another way. And I don't know how to do this. Just like we must unrar the .exe, use .img and re-lock the phone or un-root.
Anybody who knows clearly about this problems pls give me some advice.
Thanks for advance. :fingers-crossed:
I'm so sorry if this is about spamming but I'm now so stressful (.
Click to expand...
Click to collapse
Hi. I'm an Asian user. So what seems to be the problem?
I'm quite confused here, so help me out. From what I understand here, your camera is broken after flashing Jelly Bean ROM. May I know, what kind of damage are you facing? Is it the camera software or the physical itself?
If it is the camera software problem, I supposed your device is not S-OFF yet, therefore some features may not be available for S-ON user.
If so, I suggest you to get your device S-OFF first and try re-flashing the ROM. You can find the tutorial inside this forum on how to get our device S-OFF.
But if you don't want to get your device S-OFF, I suggest you to flash the .img file inside the Jelly Bean ROM file using fastboot command.
But if it is the physical damage, I suggest you to flash this RUU in fastboot, you can google it since I forgot where I downloaded it before:
RUU_VIVO_ICS_35_S_hTC_Asia_WWE_4.10.707.1_Radio_20.74.30.0833U_3831.18.00.11_M_release_266513_signed.exe
Hope this helps.

I think you just flash ARHD 4.0 mate,it's base on stock ROM with alot of enhanced feature. Almost everything work,even Wifi Hotspot. After a long long way with every ROM for IS,i always return to ARHD
Sent from my HTC Incredible S

[q] stuck at htc logo... Plz help.....

SORRY for making a new thread for this.. but i am new to this forum and dont know rules.
i am in urgent need of help....
i was updating my incredible s ota to ics 4.0. when update was complete and installed the phone restarted and then got stuck at HTC logo screen.
i hav gone through many articles regarding this but didint help me... i took to htc customer care they told me it is hardware problem which it dont seems to me. plz help...
here is device info..
D:\HTC ANDROID>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0000
(bootloader) version-baseband: 3822.10.08.28_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.09.720.1
(bootloader) serialno: HT1AKTD00327
(bootloader) imei: 358000046510218
(bootloader) product: vivo
(bootloader) platform: HBOOT-7630
(bootloader) modelid: PG3213000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: low
(bootloader) battery-voltage: 3584mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-af9874be
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s

Is your bootloader unlocked? If not then try installing the ruu from your cpu. Google shipped incredible S ruu and install the wwe version since you seem to be from India.
You Jelly Bruh??

insertdumbnick said:
is your bootloader unlocked? If not then try installing the ruu from your cpu. Google shipped incredible s ruu and install the wwe version since you seem to be from india.
You jelly bruh??
Click to expand...
Click to collapse
i am from india.
And my bootloader is unlocked..
I dont have ruu ..
What to do now....

bewithsumit said:
i am from india.
And my bootloader is unlocked..
I dont have ruu ..
What to do now....
Click to expand...
Click to collapse
Did you use this command on cmd? fastboot flash boot boot.img while on fastboot mode? If you have s-on device you need to use that command.
Sent from my Incredible S using xda premium

Yes i used that command .... Still that didnt help........My phone has S ON
so i knew that i have to use that command.

bewithsumit said:
Yes i used that command .... Still that didnt help........My phone has S ON
so i knew that i have to use that command.
Click to expand...
Click to collapse
You use custom rom?
Sent from my Incredible S using xda premium

zulmajdi said:
You use custom rom?
Sent from my Incredible S using xda premium
Click to expand...
Click to collapse
NO ias i told that after ota update the phone got stuck at htc logo.
so i tried flashing a custom rom with update.zip method
so in that case i used that command to flash boot.img as my phone has S ON.

bewithsumit said:
NO ias i told that after ota update the phone got stuck at htc logo.
so i tried flashing a custom rom with update.zip method
so in that case i used that command to flash boot.img as my phone has S ON.
Click to expand...
Click to collapse
OK, so I believe you have left out one key piece of information.
What was the status of your phone prior to installing the ICS OTA? Did you have Revolutionary S-OFF? What ROM were you running?

bewithsumit said:
NO ias i told that after ota update the phone got stuck at htc logo.
so i tried flashing a custom rom with update.zip method
so in that case i used that command to flash boot.img as my phone has S ON.
Click to expand...
Click to collapse
Wait what? Im kinda confused After reading this I think Im reading that u flashed a custom ROM with update .zip method??? I thot that was only applied to RUU's???
It might be possible to search up on google HTC Incredible S shipped RUUs. U might be able to get the RUU like that and then upgrade it from your computer.

Buddy chill. I had a similar problem and it got fixed. Chk this out n see if it helps.
http://forum.xda-developers.com/showthread.php?t=1499866
Oops... didn't know tpbklake was helping u out. Too sleepy!

tpbklake said:
OK, so I believe you have left out one key piece of information.
What was the status of your phone prior to installing the ICS OTA? Did you have Revolutionary S-OFF? What ROM were you running?
Click to expand...
Click to collapse
Prior to installing ics ota my phone rom was gingerbread 2.3.5 and about S I am not sure whether it was off or on...Sorry for that.

Recovery problems

hi all,
i have a problem with my htc one... i can't get into the recovery.
i've tried flashing the twrp recovery with fastboot but when i select boot into recovery my phone stucks at the htc logo saying "booting into recovery"
before that i read some forums saying that i must flash twrp 2.5.0.0 m7 so the problem may be risolved. I've tried to do that and the phone magically rebooted into the recovery. But after a few seconds came out the "swipe to unlock" and the phone freezed there.
Finally, after researching an entire night, i could figure out how to solve that problem but now i've returned at the starting point...
how can i resolve this problem ?
thanks

simo94 said:
hi all,
i have a problem with my htc one... i can't get into the recovery.
i've tried flashing the twrp recovery with fastboot but when i select boot into recovery my phone stucks at the htc logo saying "booting into recovery"
before that i read some forums saying that i must flash twrp 2.5.0.0 m7 so the problem may be risolved. I've tried to do that and the phone magically rebooted into the recovery. But after a few seconds came out the "swipe to unlock" and the phone freezed there.
Finally, after researching an entire night, i could figure out how to solve that problem but now i've returned at the starting point...
how can i resolve this problem ?
thanks
Click to expand...
Click to collapse
http://techerrata.com/browse/twrp2/m7
download TWRP 2.6.3.3
put the phone in fastboot and flash TWRP 2.6.3.3 (the same way you initially flashed it)
see if the problem still persists

download TWRP 2.6.3.3
put the phone in fastboot and flash TWRP 2.6.3.3 (the same way you initially flashed it)
see if the problem still persists[/QUOTE]
thanks for replying,
i've also tried to flash that recovery and the last version of CMW but problem still persists...

simo94 said:
download TWRP 2.6.3.3
put the phone in fastboot and flash TWRP 2.6.3.3 (the same way you initially flashed it)
see if the problem still persists
Click to expand...
Click to collapse
thanks for replying,
i've also tried to flash that recovery and the last version of CMW but problem still persists...[/QUOTE]
try wiping the bootloader cache
"fastboot erase cache"
no inverted commas

cleaning the cache didn't change the problem...
only the twrp 2.5.0.0 works but it freezes after a few seconds...

simo94 said:
cleaning the cache didn't change the problem...
only the twrp 2.5.0.0 works but it freezes after a few seconds...
Click to expand...
Click to collapse
whats your fastboot getvar all results (minus your imei and serial no.)
you do have a GSM International HTC One ...right ?

I have the same problem

Yes i have an international HTC one ....
Sent from my HTC One using xda app-developers app

these are all the informations took with fastboot getvar all... hope it'll help
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__405
(bootloader) battery-status: good
(bootloader) battery-voltage: 4315mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!

simo94 said:
these are all the informations took with fastboot getvar all... hope it'll help
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__405
(bootloader) battery-status: good
(bootloader) battery-voltage: 4315mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Did you delete your main version info?
Post a pic of your bootloader please

Thanks for replying
Ehm.. no no i didn't delete it.. i've copied all without imei and serial.
here's a screen of my bootloader

no one can help me? please

simo94 said:
no one can help me? please
Click to expand...
Click to collapse
Well as a last resort and seeing that your main version is missing, I would reinstall the Red . exe
From your radio version you probably have the international version.
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
You will have to unlock your bootloader again but you then should be able to flash a recovery.
Use twrp 2.6.3.3.
Remember to backup your photos,, etc to your computer first.
Sent from my GT-I9505 using XDA Premium 4 mobile app

bored_stupid said:
Well as a last resort and seeing that your main version is missing, I would reinstall the Red . exe
From your radio version you probably have the international version.
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for replying
Yes i have the international version... so i only have to run the exe file and connect the phone? this will bring back to the stock rom?

simo94 said:
Thanks for replying
Yes i have the international version... so i only have to run the exe file and connect the phone? this will bring back to the stock rom?
Click to expand...
Click to collapse
Yes. It will update your bootloader to 1.56, so maybe harder to S-Off. So if your going down that route. You may want to do that before you install the ruu
Sent from my GT-I9505 using XDA Premium 4 mobile app

bored_stupid said:
Yes. It will update your bootloader to 1.56, so maybe harder to S-Off. So if your going down that route. You may want to do that before you install the ruu
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
so i have to get S-OFF then install the ruu.... but i've read that having S-OFF and installing RUU might brick your phone. Please tell me it's a lie :/

simo94 said:
so i have to get S-OFF then install the ruu.... but i've read that having S-OFF and installing RUU might brick your phone. Please tell me it's a lie :/
Click to expand...
Click to collapse
No you do not need S-Off to install the RUU.. If you don't want to S-Off you don't have too..
Sent from my GT-I9505 using XDA Premium 4 mobile app

bored_stupid said:
No you do not need S-Off to install the RUU.. If you don't want to S-Off you don't have too..
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
last thing... do i have to relock my bootloader first and then after i install the ruu root the device again? thanks a lot by the way

simo94 said:
last thing... do i have to relock my bootloader first and then after i install the ruu root the device again? thanks a lot by the way
Click to expand...
Click to collapse
No you shouldn't need to lock your bootloader.. But it will be locked when the RUU has installed..
Sent from my GT-I9505 using XDA Premium 4 mobile app
---------- Post added at 12:46 PM ---------- Previous post was at 12:27 PM ----------
Read instructions here to install the RUU .. Instructions about halfway down the page..
http://www.htc1guru.com/downloads/ruu-file-downloads/
Sent from my GT-I9505 using XDA Premium 4 mobile app

bored_stupid said:
No you shouldn't need to lock your bootloader.. But it will be locked when the RUU has installed..
Sent from my GT-I9505 using XDA Premium 4 mobile app
---------- Post added at 12:46 PM ---------- Previous post was at 12:27 PM ----------
Read instructions here to install the RUU .. Instructions about halfway down the page..
http://www.htc1guru.com/downloads/ruu-file-downloads/
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thanks a lot... and sorry for bothering you.

[Q] Need Help - Hong Kong RUU

Okay so I installed cm11 on my HTC One and it is great but I want to get my phone back to stock, but I can't find RUU for my HTC M7 (it's from asia hong kong) So can someone post link for the RUU I can use or is there other way to get my phone back to stock?

lightyagami11 said:
Okay so I installed cm11 on my HTC One and it is great but I want to get my phone back to stock, but I can't find RUU for my HTC M7 (it's from asia hong kong) So can someone post link for the RUU I can use or is there other way to get my phone back to stock?
Click to expand...
Click to collapse
you should always make a nandroid backup of your phone before you flash a a custom rom.
post the output of fastboot getvar all except imei/sn

alray said:
you should always make a nandroid backup of your phone before you flash a a custom rom.
post the output of fastboot getvar all except imei/sn
Click to expand...
Click to collapse
C:\Users\Light\Desktop\Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.708.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__622
(bootloader) battery-status: good
(bootloader) battery-voltage: 4301mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-f6d46eca
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.042s
Here it is!

lightyagami11 said:
C:\Users\Light\Desktop\Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.708.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__622
(bootloader) battery-status: good
(bootloader) battery-voltage: 4301mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-f6d46eca
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.042s
Here it is!
Click to expand...
Click to collapse
there is no RUU for .708 version. If you have a backup you could restore it.

alray said:
there is no RUU for .708 version. If you have a backup you could restore it.
Click to expand...
Click to collapse
That's a bummer.. And no I dont have stock backup..Is there any hope that maybe RUU for 708 will be relased?

lightyagami11 said:
That's a bummer.. And no I dont have stock backup..Is there any hope that maybe RUU for 708 will be relased?
Click to expand...
Click to collapse
I really don't know, maybe you should check Asian websites to see if its available.

alray said:
I really don't know, maybe you should check Asian websites to see if its available.
Click to expand...
Click to collapse
Okay thanks. I have one more question if i let's say want to install viper one rom i just need to downlaod it and than flash it in cwm recovery?

lightyagami11 said:
Okay thanks. I have one more question if i let's say want to install viper one rom i just need to downlaod it and than flash it in cwm recovery?
Click to expand...
Click to collapse
yes. always make sure you use the recovery specified for the rom you want to flash. some rom require twrp recovery.

i am also looking that RUU, but did't found it anywhere

sanky1 said:
i am also looking that RUU, but did't found it anywhere
Click to expand...
Click to collapse
Because there is none.

I'm looking for hk ruu too! I came along this Chinese website,not sure if this is the proper ruu for hk htc m7 since i can't read chinese.
But for those who can, can you confirm this forum?
bbs.mumayi.com/forum.php?mod=viewthread&tid=2806051&extra=page%3D1%26filter%3Dtypeid%26typeid%3D3597

ypkwok said:
I'm looking for hk ruu too! I came along this Chinese website,not sure if this is the proper ruu for hk htc m7 since i can't read chinese.
But for those who can, can you confirm this forum?
bbs.mumayi.com/forum.php?mod=viewthread&tid=2806051&extra=page%3D1%26filter%3Dtypeid%26typeid%3D3597
Click to expand...
Click to collapse
I used Chrome to translate the page, and the replies are an endless stream of "thank you". And based on the filename, it has to be the right one for this phone. There is *one* standard international HTC One in Hong Kong, and they should all have CID=HTC__622. The model is m7_ul, and that agrees with the forum post.
If you try this, let us know the result! I'd really like to know if there's finally a way to return this phone to 100% stock! Note: if it's the right RUU, you should be able to flash it without changing your CID. (Question: Do we need to be S-Off to flash an older version of a RUU?)

fenstre said:
I used Chrome to translate the page, and the replies are an endless stream of "thank you". And based on the filename, it has to be the right one for this phone. There is *one* standard international HTC One in Hong Kong, and they should all have CID=HTC__622. The model is m7_ul, and that agrees with the forum post.
If you try this, let us know the result! I'd really like to know if there's finally a way to return this phone to 100% stock! Note: if it's the right RUU, you should be able to flash it without changing your CID. (Question: Do we need to be S-Off to flash an older version of a RUU?)
Click to expand...
Click to collapse
You need S-Off to flash an older version of a RUU. And I read the page, the "thank yous" are pretty much spammed because you needed to reply before showing the download link, but I'm downloading it right now, and based on the file size and file name, it's probably the right one.

fenstre said:
I used Chrome to translate the page, and the replies are an endless stream of "thank you". And based on the filename, it has to be the right one for this phone. There is *one* standard international HTC One in Hong Kong, and they should all have CID=HTC__622. The model is m7_ul, and that agrees with the forum post.
If you try this, let us know the result! I'd really like to know if there's finally a way to return this phone to 100% stock! Note: if it's the right RUU, you should be able to flash it without changing your CID. (Question: Do we need to be S-Off to flash an older version of a RUU?)
Click to expand...
Click to collapse
So i have tried this ruu, it works for HTC One Hong Kong version.
this is the direct link to down hk ruu (RUU_M7_UL_JB_50_S_hTC_Asia_HK_2.24.708.4):
pan.baidu.com/share/link?shareid=1432675332&uk=587915873

ypkwok said:
So i have tried this ruu, it works for HTC One Hong Kong version.
this is the direct link to down hk ruu (RUU_M7_UL_JB_50_S_hTC_Asia_HK_2.24.708.4):
pan.baidu.com/share/link?shareid=1432675332&uk=587915873
Click to expand...
Click to collapse
Thanks for your investigation. I re-uploaded this and posted the link in a couple places--hopefully it will get added to the big "all RUU" lists.

ypkwok said:
So i have tried this ruu, it works for HTC One Hong Kong version.
this is the direct link to down hk ruu (RUU_M7_UL_JB_50_S_hTC_Asia_HK_2.24.708.4):
pan.baidu.com/share/link?shareid=1432675332&uk=587915873
Click to expand...
Click to collapse
hi!
anyone tried to extract this zip file? i'm getting a corrupted file error. i just want to make sure that i can extract this file before flash on my m7. btw, i downloaded this ruu on all servers available even on the original one. and i get same md5 hash.

cyrom said:
hi!
anyone tried to extract this zip file? i'm getting a corrupted file error. i just want to make sure that i can extract this file before flash on my m7. btw, i downloaded this ruu on all servers available even on the original one. and i get same md5 hash.
Click to expand...
Click to collapse
You don't need to extract the zip file. I used this video as a guide.
youtube.com/watch?v=C0G0hKY4P9Y @4:38 is where he begins to talk about how you use the zip file.

Yes, i know. I just need to know if yours extracts successfully on your pc (right click, extract), if you tried to. Cuz normally i check zip files if they extract properly on my pc to see if it will also flash properly on my mobile.. This ruu zip got error so im not sure if it will flash properly on my device so... May i request. Can you try extracting the ruu zip?
Sent from my C6903 using XDA Free mobile app

cyrom said:
Yes, i know. I just need to know if yours extracts successfully on your pc (right click, extract), if you tried to. Cuz normally i check zip files if they extract properly on my pc to see if it will also flash properly on my mobile.. This ruu zip got error so im not sure if it will flash properly on my device so... May i request. Can you try extracting the ruu zip?
Sent from my C6903 using XDA Free mobile app
Click to expand...
Click to collapse
the ruu.zip is encrypted it's normal to get an error opening it

Ok.. I get it now. Important is that it has same md5.. So thanks!
Sent from my C6903 using XDA Free mobile app