Related
I've installed CM7 but when I wanted to recover to my originele sense 3 rom, the phone would not boot. So my question is if I can download the stock rom from my Incredible S?
Method01 said:
I've installed CM7 but when I wanted to recover to my originele sense 3 rom, the phone would not boot. So my question is if I can download the stock rom from my Incredible S?
Click to expand...
Click to collapse
yes you can. however your bootloader will change.so are you s-off by xtc clip or software hack?
here are the roms:
http://forum.xda-developers.com/showthread.php?t=1033922
ajeya said:
yes you can. however your bootloader will change.so are you s-off by xtc clip or software hack?
here are the roms:
http://forum.xda-developers.com/showthread.php?t=1033922
Click to expand...
Click to collapse
Thanks. Which one i have to choose? Bought it in Europe and it is unbranded
I did it like here:
http://forum.xda-developers.com/showthread.php?t=1337105
And for going back to the stock rom, do I need to flash some things again or is it just factory reset + install from zip file?
http://forum.xda-developers.com/showpost.php?p=18079795&postcount=1 so that is the method to get the phone
back like new?
Or is it this topic I have to follow: http://forum.xda-developers.com/showthread.php?t=1359555
Gave it a try.. Wit the RUU method it always gave an error on my desktop and a security and update fail on my phone
So i copied the PG32IMG.zip on my sdcard and bootloader found the file.
Then in the right top corner is see some kind of status bar en when it is full, nothing happens. The phone didn't ask for any update.
What now
nobody who can help plz?
Method01 said:
Gave it a try.. Wit the RUU method it always gave an error on my desktop and a security and update fail on my phone
So i copied the PG32IMG.zip on my sdcard and bootloader found the file.
Then in the right top corner is see some kind of status bar en when it is full, nothing happens. The phone didn't ask for any update.
What now
Click to expand...
Click to collapse
OK, in reading through your posts, it sounds like you currently have HBOOT version 2.00.0000 Unlocked on your phone. That version is not going to let you install an older RUU/PG32IMG.zip file. You will have to flash the Sense 3.0 /3.08.405.3 RUU to get rid of CM7.
tpbklake said:
OK, in reading through your posts, it sounds like you currently have HBOOT version 2.00.0000 Unlocked on your phone. That version is not going to let you install an older RUU/PG32IMG.zip file. You will have to flash the Sense 3.0 /3.08.405.3 RUU to get rid of CM7.
Click to expand...
Click to collapse
That's correct.
I used the P32IMG.zip from:
RUU_VIVO_SENSE30_S_HTC_WWE_3.08.405.3_Radio_20.4802.30.0822U_3822.10.08.28_M_release_227170_signed.exe
That is already the right one, not?
When I use the RUU installer on pc it says I'll update from image version 2.30.405.1 to 3.08.405.3
c:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0000
(bootloader) version-baseband: 3822.10.08.28_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.08.405.3
(bootloader) serialno: HT12TTD09339
(bootloader) imei: 355301040658406
(bootloader) product: vivo
(bootloader) platform: HBOOT-7630
(bootloader) modelid: PG3213000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 3768mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-af9874be
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Method01 said:
That's correct.
I used the P32IMG.zip from:
RUU_VIVO_SENSE30_S_HTC_WWE_3.08.405.3_Radio_20.4802.30.0822U_3822.10.08.28_M_release_227170_signed.exe
That is already the right one, not?
When I use the RUU installer on pc it says I'll update from image version 2.30.405.1 to 3.08.405.3
Click to expand...
Click to collapse
Yes that is the right one. Everything looks good.
tpbklake said:
Yes that is the right one. Everything looks good.
Click to expand...
Click to collapse
Strange thing is that I always tried with that one and it didn't update..
Method01 said:
Strange thing is that I always tried with that one and it didn't update..
Click to expand...
Click to collapse
OK, since you have the HBOOT in an UNLOCKED state, the PG32IMG.zip/RUU will not update. You need to go into FASTBOOT mode and relock the HBOOT and then you can flash the PG32IMG.zip file.
Here's a link:
http://rootzwiki.com/topic/9322-how-to-relocked-hboot-htc-root-method/
tpbklake said:
OK, since you have the HBOOT in an UNLOCKED state, the PG32IMG.zip/RUU will not update. You need to go into FASTBOOT mode and relock the HBOOT and then you can flash the PG32IMG.zip file.
Here's a link:
http://rootzwiki.com/topic/9322-how-to-relocked-hboot-htc-root-method/
Click to expand...
Click to collapse
it worked!
thank you very much !
my friend ask me to install a custom rom for him because his phone is laggy, well, as i installed many custom rom with my phone so i think i could help,
i was about to unlock BL, install recovery, root, but than, the phone said there is an update, which i think well, maybe install the latest one to see if it's smooth, during the download, the internet screwed up at 60% and run again, when it complete, it install and after the installation, i got the red triangle on the phone, than stucking at htc logo and couldnt go inside, how can i revert back to normal stage? or is there a way i can unlock-install recovery-root-flash rom from the laptop, because i can get into fastboot i think (power+volume down)
thanks for any tips guys
this belongs in general section.
since there is a red triangle i assume you have not installed CWM or 4ext?
OTA updates dont install on unlocked bootloader AFAIK.
Sorry, i was looking for q&a sectikn but couldnt find one, so how do i install it, i couldnt even go into the launcher
Edit: my device still locked
Sent from my Nexus 7 using xda premium
flash CWM via fastboot and install a custom ROM.
goku16 said:
Sorry, i was looking for q&a sectikn but couldnt find one, so how do i install it, i couldnt even go into the launcher
Edit: my device still locked
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
There is a documented procedure at HTCDEV.com to unlock the bootloader if the HBOOT version is 1.16 or above.
Mmmh, you can install an official RUU from there http://forum.xda-developers.com/showthread.php?t=1033922.
WARNING: this will delete root privileges.
Ouden said:
Mmmh, you can install an official RUU from there http://forum.xda-developers.com/showthread.php?t=1033922.
WARNING: this will delete root privileges.
Click to expand...
Click to collapse
Ruu need device on isnt it?
Sent from my Nexus 7 using xda premium
thedarkjack said:
flash CWM via fastboot and install a custom ROM.
Click to expand...
Click to collapse
My phone is locked and rooted yet,
and last time i remember is hboot version 2.00.0000
damn im stuck on the bootloader
how to flash this stuff guyss
please
Sent from my Nexus 7 using xda premium
Bumb! Please guy, is there a any .img i could do in fastboot mode so it back to normal?
Sent from my HTC Desire S using xda premium
Ouden said:
Mmmh, you can install an official RUU from there http://forum.xda-developers.com/showthread.php?t=1033922.
WARNING: this will delete root privileges.
Click to expand...
Click to collapse
goku16 said:
Ruu need device on isnt it?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
goku16 said:
Bumb! Please guy, is there a any .img i could do in fastboot mode so it back to normal?
Sent from my HTC Desire S using xda premium
Click to expand...
Click to collapse
Yes download a RUU and run it. You just need to follow the instructions on the screen. It tells you when to power on and connect the phone.
If you put it in FASTBOOT USB mode, then type the command
fastboot getvar all
And then post the results, we will be able to tell you which RUU you should use.
goku16 said:
Ruu need device on isnt it?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
you can install the ruu from hboot. just go into fastboot when you do it so it is in fastboot usb mode when connected to your pc. make sure drivers are installed.
okay, i downloaded the wrong ruu, downloading the latest one to try it now, cuz i was updating OTA,so i suppose it is the latest one, will give info soon, thanks guys
the factory site isnt stable as i download 100mb and it stopped, is there alternative link to download?
RUU_VIVO_SENSE30_S_HTC_WWE_3.11.405.2_Radio_20.4805.30.. this one?
please guys
arg, damn it, i need to set up the fastboot folder to be able to identify my phone info, my laptop hdd crashed , i used to have it, get back in a minute, btw, "RUU_VIVO_SENSE30_S_HTC_WWE_3.11.405.2_Radio_20.4805.30.0822U_3822.01.08.14_M_release_252414_signed (1)" said customer ID error when i tried to install it
edited: (bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0000
(bootloader) version-baseband: 3822.10.08.28_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.09.980.4
(bootloader) serialno: HT17RTD06697
(bootloader) imei: 358000041468131
(bootloader) product: vivo
(bootloader) platform: HBOOT-7630
(bootloader) modelid: PG3213000
(bootloader) cidnum: OPTUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4118mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-af9874be
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
please tell me which one to downlaod
thanks a lot
goku16 said:
arg, damn it, i need to set up the fastboot folder to be able to identify my phone info, my laptop hdd crashed , i used to have it, get back in a minute, btw, "RUU_VIVO_SENSE30_S_HTC_WWE_3.11.405.2_Radio_20.4805.30.0822U_3822.01.08.14_M_release_252414_signed (1)" said customer ID error when i tried to install it
edited: (bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0000
(bootloader) version-baseband: 3822.10.08.28_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.09.980.4
(bootloader) serialno: HT17RTD06697
(bootloader) imei: 358000041468131
(bootloader) product: vivo
(bootloader) platform: HBOOT-7630
(bootloader) modelid: PG3213000
(bootloader) cidnum: OPTUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4118mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-af9874be
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
please tell me which one to downlaod
thanks a lot
Click to expand...
Click to collapse
That means you will need a goldcard into to flash that RUU.
tpbklake said:
That means you will need a goldcard into to flash that RUU.
Click to expand...
Click to collapse
is the for the ruu i tried? is that the correct ruu?
what is goldcard
can u please be more specific
appreciated
goku16 said:
is the for the ruu i tried? is that the correct ruu?
what is goldcard
can u please be more specific
appreciated
Click to expand...
Click to collapse
Yes the 3.11.405.2 is a good choice to use, but your CID is OPTUS001, so you need a goldcard to flash a RUU from a different region.
More specifics can be found by searching this site and forum and reading about RUUs and goldcards. There is no better way to learn IMO.
will i be able to install this one?
i think it's going back or something
RUU_Vivo_Gingerbread_S_Optus_AU_2.12.980.2_R_Radio_20.2...
goku16 said:
will i be able to install this one?
i think it's going back or something
RUU_Vivo_Gingerbread_S_Optus_AU_2.12.980.2_R_Radio_20.2...
Click to expand...
Click to collapse
gingerbread is fine just DO NOT do froyo. that one should work because im optus too. i used another ruu when i needed one but thats because i have a goldcard.
naathaanb96 said:
gingerbread is fine just DO NOT do froyo. that one should work because im optus too. i used another ruu when i needed one but thats because i have a goldcard.
Click to expand...
Click to collapse
it's so confusing to creat a goldcard (
Hi everybody!
My IS has been unlocked from htcdev.com and currently uses Jelly Bean ROM form Nik. So unhappy that there's a problems with my camera and I need to maintain it, just bought it 10 days ago. So I wanna back to the origin ROM. I have read many topics but there's no topic about it in this HTC IS tab. I have known that:
+ Download the ROM ( RUU of something like that, I know what it really is) has radio the same with the one appears in the boot-launcher mode.
+ Flash ROM by using .exe may brock the phone .
+ We must use another way. And I don't know how to do this. Just like we must unrar the .exe, use .img and re-lock the phone or un-root.
Anybody who knows clearly about this problems pls give me some advice.
Thanks for advance. :fingers-crossed:
I'm so sorry if this is about spamming but I'm now so stressful (.
why dont you install Nik's Project X v4.1? that is a good ICS sense 4 rom. Camera and video and everything else works properly in that ROM.
abc_8989 said:
Hi everybody!
My IS has been unlocked from htcdev.com and currently uses Jelly Bean ROM form Nik. So unhappy that there's a problems with my camera and I need to maintain it, just bought it 10 days ago. So I wanna back to the origin ROM. I have read many topics but there's no topic about it in this HTC IS tab. I have known that:
+ Download the ROM ( RUU of something like that, I know what it really is) has radio the same with the one appears in the boot-launcher mode.
+ Flash ROM by using .exe may brock the phone .
+ We must use another way. And I don't know how to do this. Just like we must unrar the .exe, use .img and re-lock the phone or un-root.
Anybody who knows clearly about this problems pls give me some advice.
Thanks for advance. :fingers-crossed:
I'm so sorry if this is about spamming but I'm now so stressful (.
Click to expand...
Click to collapse
You simply need to locate the RUU that matches the one you had when you unlocked your phone at HTCDEV.com.
Then relock the bootloader and run the RUU and you should be good to go.
If you put the phone in FASTBOOT USB mode and then enter and post the results of this command:
fastboot getvar all
we can help you identify the RUU you should use.
I'm Asian and here my radio : 3831.18.00.11_M. There are 2 files in the filefactory folder, the follow link RUU out there. I downloaded WWE one.
SO I must put the .exe file into the folder which I created for unlocking phone?
tpbklake said:
You simply need to locate the RUU that matches the one you had when you unlocked your phone at HTCDEV.com.
Then relock the bootloader and run the RUU and you should be good to go.
If you put the phone in FASTBOOT USB mode and then enter and post the results of this command:
fastboot getvar all
we can help you identify the RUU you should use.
Click to expand...
Click to collapse
Sry to interrupt.
Please tell me which RUU do I need ?
Mine is as follow.
version: 0.5
version-bootloader: 2.02.0002
version-baseband: 3831.18.00.11_M
version-cpld: None
version-microp: None
version-main: 2.32.1010.1
serialno: HT18KTD01750
imei: 358000042821874
product: vivo
platform: HBOOT-7630
modelid: PG3213000
cidnum: HTC__A07
battery-status: good
battery-voltage: 4132mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: d41e50e7
hbootpreupdate: 12
gencheckpt: 0
thank u.
OMG... I don't know how to collect all of this info. I unlocked phone at Fastboot, the same hbooy with you. But what do u mean about which ROM I need? I think that one phone has olny one RUU. Sr for my english if it too meaning.
abc_8989 said:
I'm Asian and here my radio : 3831.18.00.11_M. There are 2 files in the filefactory folder, the follow link RUU out there. I downloaded WWE one.
SO I must put the .exe file into the folder which I created for unlocking phone?
Click to expand...
Click to collapse
No, you can now execute this file from any directory. It is a program that will guide you through the process of flashing this ROM.
Sorry dude. Why don't you simply flash We Want ICS by Nik?
It will be as having a rooted phone with the stock rom, ICS/Sense 3.6.
It's the simplest manner and the ROM wont let you disapponted...
Sent from my Incredible S using xda app-developers app
But I want to come back to the default ROM because my camera has been broken and I need to maintain it at HTC. They will not maintain it if it is a rooted and unlocked phone.
When you say your camera is broken do you mean physical damage?
If your camera isn't working on the current JB ROM, thats a knows issue.
Even I would suggest flashing Nik's We Want ICS. It is like an optimised version of the stock. Most chances are that your camera should work. Flashing it should be easy-peasy. If your camera still doesn't work we could help you revert to Stock.
My advise is to flash a rom that has working camera drivers such as Project x4.1.
If the camera still not works properly lock your phone and install the RUU you need.
Yes, Its a physical damage. And I need to maintain it at HTC service. That's why I need to go back to the default ROM.
tpbklake said:
You simply need to locate the RUU that matches the one you had when you unlocked your phone at HTCDEV.com.
Then relock the bootloader and run the RUU and you should be good to go.
If you put the phone in FASTBOOT USB mode and then enter and post the results of this command:
fastboot getvar all
we can help you identify the RUU you should use.
Click to expand...
Click to collapse
abc_8989 said:
Yes, Its a physical damage. And I need to maintain it at HTC service. That's why I need to go back to the default ROM.
Click to expand...
Click to collapse
So you never did respond with this information to help you pick the correct RUU. Must have gotten lost in all of the 'why not flash a custom ROM' posts, huh?
abc_8989 said:
Yes, Its a physical damage. And I need to maintain it at HTC service. That's why I need to go back to the default ROM.
Click to expand...
Click to collapse
Sorry to say you but when you give ur phone to HTC guy they will know that your warranty is void because even if you flash ruu and lock ur bootloader again u will see the the status "RELOCKED" instead of "LOCK" in hboot mode.
Sent from my HTC Incredible S using xda premium
OMG, so soooooo sad about that (. Thank all you guys for helping me, but there's still a way for me to install ROMfor mr to sell the phone for the "comfortable" price?
bhaumik555 said:
Sorry to say you but when you give ur phone to HTC guy they will know that your warranty is void because even if you flash ruu and lock ur bootloader again u will see the the status "RELOCKED" instead of "LOCK" in hboot mode.
Sent from my HTC Incredible S using xda premium
Click to expand...
Click to collapse
That's not always true. Unless you take it to them with a software issue they generally dont bother with checking hboot and stuff.
I got my Incredible S repaired (it had a malfunctioning earpiece) even if my hboot said Relocked.
Hi! i did the fastboot getvar all, anyone can help me, what RUU do i need?
(i wast stock rom too)
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.02.
(bootloader) version-baseband: 3831.18
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.10.405.1
(bootloader) serialno: HT12VTD11274
(bootloader) imei: xxxxxxxxxxxxxxxxxx
(bootloader) product: vivo
(bootloader) platform: HBOOT-7630
(bootloader) modelid: PG3213000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4073mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: d41e
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
szuladam said:
Hi! i did the fastboot getvar all, anyone can help me, what RUU do i need?
(i wast stock rom too)
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.02.
(bootloader) version-baseband: 3831.18
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.10.405.1
(bootloader) serialno: HT12VTD11274
(bootloader) imei: XXXXXXXXXXXXXX
(bootloader) product: vivo
(bootloader) platform: HBOOT-7630
(bootloader) modelid: PG3213000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4073mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: d41e
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Never show your IMEI number while posting info about your phone.:angel:
abc_8989 said:
Hi everybody!
My IS has been unlocked from htcdev.com and currently uses Jelly Bean ROM form Nik. So unhappy that there's a problems with my camera and I need to maintain it, just bought it 10 days ago. So I wanna back to the origin ROM. I have read many topics but there's no topic about it in this HTC IS tab. I have known that:
+ Download the ROM ( RUU of something like that, I know what it really is) has radio the same with the one appears in the boot-launcher mode.
+ Flash ROM by using .exe may brock the phone .
+ We must use another way. And I don't know how to do this. Just like we must unrar the .exe, use .img and re-lock the phone or un-root.
Anybody who knows clearly about this problems pls give me some advice.
Thanks for advance. :fingers-crossed:
I'm so sorry if this is about spamming but I'm now so stressful (.
Click to expand...
Click to collapse
Hi. I'm an Asian user. So what seems to be the problem?
I'm quite confused here, so help me out. From what I understand here, your camera is broken after flashing Jelly Bean ROM. May I know, what kind of damage are you facing? Is it the camera software or the physical itself?
If it is the camera software problem, I supposed your device is not S-OFF yet, therefore some features may not be available for S-ON user.
If so, I suggest you to get your device S-OFF first and try re-flashing the ROM. You can find the tutorial inside this forum on how to get our device S-OFF.
But if you don't want to get your device S-OFF, I suggest you to flash the .img file inside the Jelly Bean ROM file using fastboot command.
But if it is the physical damage, I suggest you to flash this RUU in fastboot, you can google it since I forgot where I downloaded it before:
RUU_VIVO_ICS_35_S_hTC_Asia_WWE_4.10.707.1_Radio_20.74.30.0833U_3831.18.00.11_M_release_266513_signed.exe
Hope this helps.
I think you just flash ARHD 4.0 mate,it's base on stock ROM with alot of enhanced feature. Almost everything work,even Wifi Hotspot. After a long long way with every ROM for IS,i always return to ARHD
Sent from my HTC Incredible S
Hey guys,
Sorry if I am in the wrong place for this question but I am completely stuck. I recently bought a HTC One M7 which was rooted. I did not know this when I was buying it. The new update came out and my phone asked me to update. I hit yes. My phone switched off and didn't come back on. After extensive research I got it back on to find the following:
1) It was rooted
2)Bootloader started up and TWRP is on the phone
3) There is now nothing on the phone. No firmware or packages at all
4) When I try to flash anything I get the error message: can't mount to system. I can mount to everything else ok just not internal storage.
I am unsure what recovery image and RUU to use. The phone (I was told was unlocked) was O2(Giffgaff).
Details are:
***Tampered***
***Unlocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
Radio-4A.21.3263.04
OpenDSP-v32.120.724.0909
OS-3.62.206.1
eMMC-boot 2048MB
Oct 18 2013, 00:29:38. 0
IMAGE CRC
rpm: 0xC5567FC
sbl1: 0x9FE7A28C
sbl2: 0XA915A4DD
sbl3: 0xB221B6BB
tz: 0XCCD5DF62
radio: 0XEFA42613
hboot: 0xC174663B
boot: 0x94C89910
recovery: 0x59BF6CD
system: 0xFF83AB1
Any help at this stage would be greatly appreciated! I am about to just give up and bin it...
Thanks in advance!
When does it fail mounting system? When flashing a ROM in TWRP or flashing an RUU?
aooga said:
When does it fail mounting system? When flashing a ROM in TWRP or flashing an RUU?
Click to expand...
Click to collapse
it seems to be both. I try to flash RUU via fastboot and I get a signature fail. So I try to flash a ROM to the phone and it says failed to mount system. I put the items on a usb and tried it but get an 'unable to unzip' error. Its a bit above me to be honest. Thank you so much for helping.
olimoh8464 said:
it seems to be both. I try to flash RUU via fastboot and I get a signature fail. So I try to flash a ROM to the phone and it says failed to mount system. I put the items on a usb and tried it but get an 'unable to unzip' error. Its a bit above me to be honest. Thank you so much for helping.
Click to expand...
Click to collapse
... buddy when bootloader is unlocked and phone s-on, no ruu will work. now for ruu to flash you need to relock the bootloader and then run ruu. it will surely flash :victory: ...
Devilish_Angel said:
... buddy when bootloader is unlocked and phone s-on, no ruu will work. now for ruu to flash you need to relock the bootloader and then run ruu. it will surely flash :victory: ...
Click to expand...
Click to collapse
When you say run the RUU to you mean the RUU from the desktop or directly from the phone? How do I know if I have the correct RUU? the closest one I could find was for O2 and the radio was the same down to the last digit being different. Sorry for sounding stupid but it is a lot to take in for such a noob. I read that I need to flash a boot recovery image and then run the RUU is that right?
olimoh8464 said:
When you say run the RUU to you mean the RUU from the desktop or directly from the phone? How do I know if I have the correct RUU? the closest one I could find was for O2 and the radio was the same down to the last digit being different. Sorry for sounding stupid but it is a lot to take in for such a noob. I read that I need to flash a boot recovery image and then run the RUU is that right?
Click to expand...
Click to collapse
... run it from desktop while phone in bootloader. no need to run boot image ...
olimoh8464 said:
When you say run the RUU to you mean the RUU from the desktop or directly from the phone? How do I know if I have the correct RUU? the closest one I could find was for O2 and the radio was the same down to the last digit being different. Sorry for sounding stupid but it is a lot to take in for such a noob. I read that I need to flash a boot recovery image and then run the RUU is that right?
Click to expand...
Click to collapse
RUU must match your CID number.
I add you here link to a good thread:
http://forum.xda-developers.com/showthread.php?t=2358738
tetakpatalked from Nexus 7 flo
Devilish_Angel said:
... buddy when bootloader is unlocked and phone s-on, no ruu will work. now for ruu to flash you need to relock the bootloader and then run ruu. it will surely flash :victory: ...
Click to expand...
Click to collapse
This is wrong. You can flash the ruu that mathches the cid and mid of your phone even with a locked bl.
Sent from my GT-I9505 using Tapatalk
Thank you for the advice and the link! I will go try this now and let you know how I get on!
aooga said:
This is wrong. You can flash the ruu that mathches the cid and mid of your phone even with a locked bl.
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
... did i say something different than what you are saying ...
@aooga Angel's point was S-On, I think.
tetakpatalked from the legendary i9000
olimoh8464 said:
Hey guys,
Sorry if I am in the wrong place for this question but I am completely stuck. I recently bought a HTC One M7 which was rooted. I did not know this when I was buying it. The new update came out and my phone asked me to update. I hit yes. My phone switched off and didn't come back on. After extensive research I got it back on to find the following:
1) It was rooted
2)Bootloader started up and TWRP is on the phone
3) There is now nothing on the phone. No firmware or packages at all
4) When I try to flash anything I get the error message: can't mount to system. I can mount to everything else ok just not internal storage.
I am unsure what recovery image and RUU to use. The phone (I was told was unlocked) was O2(Giffgaff).
Details are:
***Tampered***
***Unlocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
Radio-4A.21.3263.04
OpenDSP-v32.120.724.0909
OS-3.62.206.1
eMMC-boot 2048MB
Oct 18 2013, 00:29:38. 0
IMAGE CRC
rpm: 0xC5567FC
sbl1: 0x9FE7A28C
sbl2: 0XA915A4DD
sbl3: 0xB221B6BB
tz: 0XCCD5DF62
radio: 0XEFA42613
hboot: 0xC174663B
boot: 0x94C89910
recovery: 0x59BF6CD
system: 0xFF83AB1
Any help at this stage would be greatly appreciated! I am about to just give up and bin it...
Thanks in advance!
Click to expand...
Click to collapse
Post a fastboot getvar all
RUU.exe files or ROM Update Utility files are executable files that run on Windows PC
RUU.zip files are simply the same as above but rather than using a Windows exe file to run them, they are packaged in a zip file that can be flashed in Fastboot mode
The RUU has to match your CID/MID. If your S-On, the RUU as to be same version or higher
Sent from my Nexus 7 using XDA Premium 4 mobile app
Devilish_Angel said:
... did i say something different than what you are saying ...
Click to expand...
Click to collapse
Uh..yeah. You said:
when bootloader is unlocked and phone s-on, no ruu will work
Click to expand...
Click to collapse
bored_stupid said:
Post a fastboot getvar all
RUU.exe files or ROM Update Utility files are executable files that run on Windows PC
RUU.zip files are simply the same as above but rather than using a Windows exe file to run them, they are packaged in a zip file that can be flashed in Fastboot mode
The RUU has to match your CID/MID. If your S-On, the RUU as to be same version or higher
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks! Is there any way you could tell me the correct RUU to download? I will post a fastboot getvar all after work this evening. I tried one that I thought was right but when I click to run it as administrator I get prompted with the normal are you sure? click yes and nothing happens. It just doesn't run. Tried downloading it again but still nothing. Any ideas?
olimoh8464 said:
Thanks! Is there any way you could tell me the correct RUU to download? I will post a fastboot getvar all after work this evening. I tried one that I thought was right but when I click to run it as administrator I get prompted with the normal are you sure? click yes and nothing happens. It just doesn't run. Tried downloading it again but still nothing. Any ideas?
Click to expand...
Click to collapse
Yeah no problems. Off to work myself now, but will post correct link if any and possible other solutions.
Sent from my HTC One using XDA Premium 4 mobile app
bored_stupid said:
Yeah no problems. Off to work myself now, but will post correct link if any and possible other solutions.
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
C:\Users\milo\Desktop\Newest>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.206.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA366W900013
(bootloader) imei: 3578640********
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3965mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
OMG My phone literally did the same exact thing today!! I woke up, a few things were force closing so I decided that I would just reboot the phone...... Big mistake, once I did that, the phone just stayed in the booting up animation. So I figured hey what ever ill just reflash the ROM in TWRP.......Nope, couldn't boot into recovery either, the phone would flash the TWRP screen then just reset itself. Again, I thought no biggie ill just reinstall TWRP. This (again) proved to be useless, after multiple (successful) install's the phone still refused to boot into TWRP. So I finally got CWM to install, a noticed a few things at the bottom of the screen about something not being mounted properly, I didn't pay that much attention to it, i just wanted my phone back at that point. I tried to wipe my phone for a fresh flash, but as soon as the wipe began the phone reset itself. At this point I was on the brink of throwing this thing into the torrential down-pour that god decided to place in my city.
Next I tried to install Viper ROM because I knew it had a wipe functionality built into it's Aroma installer. Went through all the checklists got to the start install screen, clicked next, and then began to wipe......... and then reset again........
So finally I got TWRP reinstalled, and go install a fresh ROM and and immediately met with a screen full of : "Unable to Mount XXXXXXX" (Picture attached). So then I figure alright well my last resort has to be to use a RUU. Found this nice little thread (http://forum.xda-developers.com/showthread.php?t=2316726) and decided to use the FUU (4.19.401.11 Full Wipe). Unfortunately all that did was move my HBoot from 1.4 (or something like that) to 1.5 (or something like that), put the tamper flag back, and bring back the annoying red text at the bottom of the phone at boot (the thing about development build, blah blah blah). I reinstalled TWRP yet again hoping for the best, but still nothing. It cant seem to mount anything (what ever that means).
So now im here, stuck using my old One X. Any suggestions or answers or criticism would be very much appreciated.
Thank you!!!!!
olimoh8464 said:
C:\Users\milo\Desktop\Newest>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.206.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA366W900013
(bootloader) imei: 3578640********
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3965mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
Click to expand...
Click to collapse
This is the RUU.exe you require. Run from PC
http://www.htc1guru.com/dld/ruu_m7_..._10-38r-1157-04l_release_353143_signed_2-exe/
Sent from my HTC One using XDA Premium 4 mobile app
bored_stupid said:
This is the RUU.exe you require. Run from PC
http://www.htc1guru.com/dld/ruu_m7_..._10-38r-1157-04l_release_353143_signed_2-exe/
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for that! I have downloaded it and tried to run it but it doesn't open? I get the loading message after I click run as administrator but nothing happens. Do I need HTC sync installed or deleted for this?
Thanks
olimoh8464 said:
Thanks for that! I have downloaded it and tried to run it but it doesn't open? I get the loading message after I click run as administrator but nothing happens. Do I need HTC sync installed or deleted for this?
Thanks
Click to expand...
Click to collapse
Did you check the MD5
4961fdbbadba53c9640f3638f56faec1
When you say nothing happens.. Doesn't it even try to run?
Sent from my HTC One using XDA Premium 4 mobile app
Hey guys, so recently I purchased a htc one m7 (sprint) off of ebay. I planned to fix it because it was listed as in a bootloop. I thought this would be easy to fix, but I have run into some trouble. The phone does not boot, it just sits on the htc screen. Phone is currently s-on. I have full access to fastboot, but thats it. I feel like I have looked everywhere for a solution, but nothing has worked for me. Any help would be greatly appreciated.
Things I have tried:
1. factory reseting from bootloader menu.
2. entering recovery mode through bootloader menu. (goes back into bootloop, assuming recovery is corrupted)
3. unlocking the bootloader with htcdev, but after selecting yes on the popup menu on the phone to unlock, it just goes back into a bootloop, stays locked.
4. flashing twrp (fails due to locked bootloader)
5. using a RUU.exe to flash back to stock (bootloop, gets hung up on "waiting for bootloader..". If i manually put it back into fastboot I get a connection error)
6. using a RUU.zip and flashing through fastboot, but the "fastboot oem rebootRUU" command throws it back into a bootloop. Tried flashing without rebootRUU and got a verification error.
So, any ideas or is this thing bricked? Thanks.
Are you trying to run the RUU while already in fastboot, or are you trying to let the exe boot to fastboot for you? I'm assuming that you are running the RUU from fastboot, and the rebootRUU from the exe is looping you again?
Have you tried flashing the stock recovery?
Have you tried fastboot erase cache? (probably won't help in your situation, but why not?)
Those are some things you could try.
I am having this thread moved to the M7 Q&A forum. You'll have a good chance there of someone providing the steps you need to take to get yourself fixed up.
I suggest that you post the results of fastboot getvar all (minus you IMEI/MEID and serial# of course) so we have a better understanding of your firmware version and such.
Good luck!
yeah, im running the exe while in fastboot, and the rebootRUU loops me. I havent flashed stock recovery. will that allow me to flash anything to get this working? and i did try to wipe cache from fastboot.
so I tried flashing the stock recovery, and got a signature verification error.
here is the result of my getvar.
still not booting.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 1.01.20.1225
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.23.651.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4296mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
murphyhobo said:
so I tried flashing the stock recovery, and got a signature verification error.
here is the result of my getvar.
still not booting.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 1.01.20.1225
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.23.651.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4296mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
What is the current status of the bootloader? Locked or Relocked?
Can you please provide a link to the RUU your trying to flash.
If your using an RUU.exe then you don't need to use the Reboot RUU command. Just connect the device in fastboot usb mode and run the RUU. The RUU will boot to RUU mode for you :good:
Sent from my SM-T230 using Tapatalk
Danny201281 said:
What is the current status of the bootloader? Locked or Relocked?
Can you please provide a link to the RUU your trying to flash.
If your using an RUU.exe then you don't need to use the Reboot RUU command. Just connect the device in fastboot usb mode and run the RUU. The RUU will boot to RUU mode for you :good:
Sent from my SM-T230 using Tapatalk
Click to expand...
Click to collapse
ok heres the link http://forum.xda-developers.com/showthread.php?t=2795856.
and my bootloader is locked.
I have tried just letting the .exe boot me to RUU, but it was stuck at "waiting for bootloader..". I waited for a little bit, but my phone kept vibrating and rebooting, and then eventually it lost connection and closed. I have tried multiple times.
murphyhobo said:
ok heres the link http://forum.xda-developers.com/showthread.php?t=2795856.
and my bootloader is locked.
I have tried just letting the .exe boot me to RUU, but it was stuck at "waiting for bootloader..". I waited for a little bit, but my phone kept vibrating and rebooting, and then eventually it lost connection and closed. I have tried multiple times.
Click to expand...
Click to collapse
I asked @coal686 about this, and he thinks it is probablya hardware problem. If so, you'll have to take it to a shop for repairs.
But there is a possibility that the previous owner wiped /system in fastboot. Highly unlikely, but fastboot erase system would cause something similar, I would imagine. Without knowing what the previous owner did to get it into this state makes it hard to narrow down.
Is there any chance you could contact the previous owner and ask what it is exactly before the phone pooched out? Let him know that there is nothing to hide now that you are the new OWNER of the phone.
xunholyx said:
I asked @coal686 about this, and he thinks it is probablya hardware problem. If so, you'll have to take it to a shop for repairs.
But there is a possibility that the previous owner wiped /system in fastboot. Highly unlikely, but fastboot erase system would cause something similar, I would imagine. Without knowing what the previous owner did to get it into this state makes it hard to narrow down.
Is there any chance you could contact the previous owner and ask what it is exactly before the phone pooched out? Let him know that there is nothing to hide now that you are the new OWNER of the phone.
Click to expand...
Click to collapse
well I would ask them, but the seller is a cell phone repair shop, so im guessing that somebody couldn't get it fixed, so they sold it to this shop, and the people probably don't have a clue what's wrong with it. I wont be worth it to try and repair it cuz it only cost me 30 bucks. It seems that the only solution here would be a RUU, but that aint working so I guess im stuck here.
murphyhobo said:
well I would ask them, but the seller is a cell phone repair shop, so im guessing that somebody couldn't get it fixed, so they sold it to this shop, and the people probably don't have a clue what's wrong with it. I wont be worth it to try and repair it cuz it only cost me 30 bucks. It seems that the only solution here would be a RUU, but that aint working so I guess im stuck here.
Click to expand...
Click to collapse
Unfortunately I think it is a lost cause . If the bootloader is not stable then it's almost certainly a hardware problem.
Even if it was some low level software issue without a stable bootloader there is no way to flash anything to the device.
Maybe sell it on eBay as Spares to try get something back from it.
Sent from my SM-T230 using Tapatalk
Alright, thanks for the help!
I have same problem htc one m7 wls
Download from http://forum.xda-developers.com/showthread.php?t=2250904
Flash in recovery
Copy zip to internal storage by enabling MTP in recovery
raghav9 9 said:
I have same problem htc one m7 wls
Download from http://forum.xda-developers.com/showthread.php?t=2250904
Flash in recovery
Copy zip to internal storage by enabling MTP in recovery
Click to expand...
Click to collapse
Not really a good idea, OP is on 6.23.651.7...... And since the OP can't even boot in recovery how he is supposed to flash this?....
alray said:
Not really a good idea, OP is on 6.23.651.7...... And since the OP can't even boot in recovery how he is supposed to flash this?....
Click to expand...
Click to collapse
Use firewater or revan to s-off first
Then unlock by htc dev
Flash cwm or twrp recovery
If you successfully 1st step then u can do easy
raghav9 9 said:
Use firewater or revan to s-off first
Then unlock by htc dev
Flash cwm or twrp recovery
If you successfully 1st step then u can do easy
Click to expand...
Click to collapse
Sorry but what you are saying is making me believe you didn't read what the OP said at all except maybe the first few lines...
Use firewater or revan to s-off first
Click to expand...
Click to collapse
Firewater is discontinued and doesn't work anymore, Revone S-OFF is for hboot 1.44 only, OP's phone is on 1.61. Achieving S-OFF requires a booting phone, exactly what the OP doesn't have. And BTW there a much newer RUU he could use than the one you have posted above that wouldn't requires S-OFF.
Then unlock by htc dev
Click to expand...
Click to collapse
I guess you missed that part:
3. unlocking the bootloader with htcdev, but after selecting yes on the popup menu on the phone to unlock, it just goes back into a bootloop, stays locked.
Click to expand...
Click to collapse
If you successfully 1st step then u can do easy
Click to expand...
Click to collapse
Not possible since like OP said:
6. using a RUU.zip and flashing through fastboot, but the "fastboot oem rebootRUU" command throws it back into a bootloop.
Click to expand...
Click to collapse
Its either a corrupt bootloader/firmware or an hardware problem and like Danny said its a lost cause.