how to flash jb kernel .ftf by cwm ? - XPERIA X8 Q&A, Help & Troubleshooting

i am updating my phone to jellybean, and for this, i need to flash jb kernel, bt cwm has no any option to flash that kernel because kernel is in .ftf, and only zip file can be flashed. what should i do ?

You can't flash kernel from CWM. You have to do it with Flashtool.
http://forum.xda-developers.com/showthread.php?t=986697

Yep, do it via flashtool bro. Next time be sure to search please
Sent from my X8 using Tapatalk 2

Please....flash kernels using flashtool....
Sent from my E15a using xda premium

have you unlock your device ?
you don't understand about how to flash custom kernel...so its mean you don't understand about how to unlock bootloader.
Before flashing custom rom you must read "Requrement and Installation" carefully.

tkox.hell said:
i am updating my phone to jellybean, and for this, i need to flash jb kernel, bt cwm has no any option to flash that kernel because kernel is in .ftf, and only zip file can be flashed. what should i do ?
Click to expand...
Click to collapse
frist unlock bootloader:( http://forum.xda-developers.com/showthread.php?t=1267273 )
second flash kernel with flashtool
third install ROM
DONE!

Related

[Q] Unable to flash stock kernel :(

I have a x8 unlocked bootloader and rooted .
I have already download the stock kernel .ftf file and flashed it using flashtool for my xperia x8 which is running xperience walkman mod 1.0 but it was no luck ... i tried to flash stock rom first but cwm would not flash it
i did tried to flash the kernel but i boot up it will just stuck at the sony ericsson logo and i am unable to enter recovery ..
Can anyone help me?
Flash stock kernel and use seus
Sent from my X8 using XDA
To the best of my knowledge, you can flash kernels only via flashtool. CWM won't help. And the kernel .ftf file must have a loader.sin in addition to a kernel.sin when viewed via flashtool.
I remember a day I flashed my X8 37 times within 24hours! At times, it would get temperamental & fail to boot beyond the SE logo screen for reasons it alone knows. Cheer up. And get flashing!
Hmmm... i dont want to use SEUS because by then i would have to reroot and even unlock bootloader again i tried couple of times to flash the stock kernel but my phone just stuck at the se logo
superng888 said:
Hmmm... i dont want to use SEUS because by then i would have to reroot and even unlock bootloader again i tried couple of times to flash the stock kernel but my phone just stuck at the se logo
Click to expand...
Click to collapse
Which kernel are you tried to flash? You can use flashtool to flash your kernel, and install ROM with CWM! If you are flashing aNa kernel, CWM is already built-in. If you still struck at SE logo, mean your kernel is not flash yet.
saintckk said:
Which kernel are you tried to flash? You can use flashtool to flash your kernel, and install ROM with CWM! If you are flashing aNa kernel, CWM is already built-in. If you still struck at SE logo, mean your kernel is not flash yet.
Click to expand...
Click to collapse
i am trying to flash se stock kernel
thx.......................................
saintckk said:
Which kernel are you tried to flash? You can use flashtool to flash your kernel, and install ROM with CWM! If you are flashing aNa kernel, CWM is already built-in. If you still struck at SE logo, mean your kernel is not flash yet.
Click to expand...
Click to collapse
Well, there's actually still ADB but it carries a certain amount of risk. With flashtool, most of that is obviated. If you need more information, scout the Android Development section for related topics.
Search in the Flashtool post the list of official firmwares, and flash one of these (yes, only that )
If the links are dead, send me a PM and I will give you the ftf that I have
I do have the .ftf file and flashed it.. but my phone will just stuck there

[Q] How to update to stock ROM?

I have read:
http://forum.xda-developers.com/showthread.php?t=1424997
http://androidforums.com/galaxy-s2-international-all-things-root/578800-what-emmc-brickbug.html
http://forum.xda-developers.com/showthread.php?t=1693704
http://forum.xda-developers.com/showthread.php?t=1644364
My question: I have a SGN infected with the eMMC bug, and I want to upgrade it to the latest stock ROM. I know very little about flashing, and I know there are some risks when doing some things. I would like to know if the first link is safe for me, and which ROM I should use of the ones listed there (I live in The Netherlands). Do you guys have any tips or some guides made for the noobs among us?
that 1st link is the safest and best.
download the rom of. your choice. It. doesn't need to be of. your region. although you can check the latest firmware on www.samfirmware.com....
Once downloaded, use pc odin with the downloaded rom tar.md5 file selected in the pda tab. The connect the phone to pc in download mode and press start.
If you are upgrading to ics, then do not do any wipes, first flash a safe kernel...
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
that 1st link is the safest and best.
download the rom of. your choice. It. doesn't need to be of. your region. although you can check the latest firmware on www.samfirmware.com....
Once downloaded, use pc odin with the downloaded rom tar.md5 file selected in the pda tab. The connect the phone to pc in download mode and press start.
If you are upgrading to ics, then do not do any wipes, first flash a safe kernel...
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
:good:
by the way what's with nokiamodeln91 username.. hahahahaha.. you are in samsung thread.. hahahahaha.. but nice one man.. great help... keep it
nokiamodeln91 said:
that 1st link is the safest and best.
download the rom of. your choice. It. doesn't need to be of. your region. although you can check the latest firmware on LINK ....
Once downloaded, use pc odin with the downloaded rom tar.md5 file selected in the pda tab. The connect the phone to pc in download mode and press start.
If you are upgrading to ics, then do not do any wipes, first flash a safe kernel...
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks for replying. Good to know that that thread is safe, but what do you mean by flashing a safe kernel? Those terms mean nothing to me.
theres two way to flash ROM. 1 is using PC ODIN and the other one is CWM
Flashing Via PC ODIN .. you need to have two thing.. The Rom You Want to flash and the PC-ODIN software
Flashing Via CWM.. you need two things. You need to root your phone and you need to install CWM.
every rom comes with modem, kernel (the file that govern how to handle your phone cpu), csc... the kernel inside ics is known to have brickbug
theres no need to flash kernel if you are flashing Rom via PC ODIN... Flashing kernel is when you are using CWM....
mistajoe83 said:
:good:
by the way what's with nokiamodeln91 username.. hahahahaha.. you are in samsung thread.. hahahahaha.. but nice one man.. great help... keep it
Click to expand...
Click to collapse
tried a few usernames dint work. tried the Samsung too, na.. then nokia to the rescue.
Sent from my GT-N7000 using xda premium
mistajoe83 said:
theres two way to flash ROM. 1 is using PC ODIN and the other one is CWM
Flashing Via PC ODIN .. you need to have two thing.. The Rom You Want to flash and the PC-ODIN software
Flashing Via CWM.. you need two things. You need to root your phone and you need to install CWM.
every rom comes with modem, kernel (the file that govern how to handle your phone cpu), csc... the kernel inside ics is known to have brickbug
theres no need to flash kernel if you are flashing Rom via PC ODIN... Flashing kernel is when you are using CWM....
Click to expand...
Click to collapse
So, I can just flash any ROM using ODIN, and there will be no risk bricking my device?
If I flash a ROM, will I have a fresh install, and will my kernel also change so that I don't have the brickbug anymore?
hiddepolen said:
So, I can just flash any ROM using ODIN, and there will be no risk bricking my device?
If I flash a ROM, will I have a fresh install, and will my kernel also change so that I don't have the brickbug anymore?
Click to expand...
Click to collapse
yes you can flash any ROM using ODIN safely without bricking your device.
yes you will have a fresh install. your kernel will change too. as for the brickbug....
If you flash via PC ODIN then everything is stock to what you flashed.the kernel the firmware the csc the modem..all as stock provided....
1.If you flash ICS via PC-ODIN then your kernel also would be stock ics kernel that has brickbug..
Warning :
Don't wipe anything from stock ICS recovery
Don't factory reset/Hard reset on stock ICS.
Don't flash any Wipe version of ICS ROM
let say you want to flash Latest JB Rom but you are on ICS stock.
first thing you need to do is root your device ...install CWM.. Flash safe kernel
http://forum.xda-developers.com/showthread.php?t=1329360
let say ive rooted... installed CWM with safe kernel...
what i always do is everytime i want to flash new rom whatever rom it is...i flash Speedmod 3-15 (safe kernel) and go to Advance>reboot recovery and flash any rom i want so that im on the safe side without worrying what kernel im on.
2.If you flash GB than your kernel will be GB kernel which is safe to wipe..
if you want to flash custom rom from gb then you root your device and installed CWM and Flash since GB kernel is safe.
but.. let say u flashed ICS and wanted to go back to GB. then you are not safe anymore,,, that is why i always flashed Speedmod kernel 3-15 (safe kernel) and reboot recovery (by going to advance>rebootrecovery) and flashed any rom... that way im always sure that im in safe kernel when flashing Rom
mistajoe83 said:
yes you will have a fresh install. your kernel will change too. as for the brickbug....
If you flash via PC ODIN then everything is stock..If you flash ICS via PC-ODIN then your kernel also would be stock ics kernel that has brickbug.. if you flash GB than your kernel will be GB kernel which is safe to wipe..
Click to expand...
Click to collapse
Thanks so much, you are an incredible help. Slowly, I begin to understand everything !
hiddepolen said:
I have read:
http://forum.xda-developers.com/showthread.php?t=1424997
http://androidforums.com/galaxy-s2-international-all-things-root/578800-what-emmc-brickbug.html
http://forum.xda-developers.com/showthread.php?t=1693704
http://forum.xda-developers.com/showthread.php?t=1644364
My question: I have a SGN infected with the eMMC bug, and I want to upgrade it to the latest stock ROM. I know very little about flashing, and I know there are some risks when doing some things. I would like to know if the first link is safe for me, and which ROM I should use of the ones listed there (I live in The Netherlands). Do you guys have any tips or some guides made for the noobs among us?
Click to expand...
Click to collapse
You can download any stock rom you want from searching it on the forum then you can flash it through ODIN using your computer

cwm / philz = root ?

do i understand that right, that i can root my stock gingerbread by flashing this cwm/philz kernel, without the need to wipe any data?
i just want to flash ultimate rom. it says i need cwm. i don't fully understand why cwm comes together with a kernel and why that kernel gives root on any rom. how to root topic doesn't mention the flashing of just a kernel to get root. i guess i got something wrong here?
baseband XXLA4 - GB 2.3.6
You cannot flash PhilZ kernel on a GB Rom. It wouldn't boot up if you did.
anloid said:
#sry wrong forum.. move please?#
do i understand that right, that i can root my stock gingerbread by flashing this cwm/philz kernel, without the need to wipe any data?
i just want to flash ultimate rom. it says i need cwm. i don't fully understand why cwm comes together with a kernel and why that kernel gives root on any rom. how to root topic doesn't mention the flashing of just a kernel to get root. i guess i got something wrong here?
baseband XXLA4 - GB 2.3.6
Click to expand...
Click to collapse
for the Note the kernel and recovery are integrated, each kernel has a corresponding cwm recovery and root features too
so when you want to root a rom you have to flash a suitable kernel which will give it a cwm recovery to flash custom roms from and it will also give root features too.
Phillz kernels root stock ICS Touchwizz roms when flashed from stock recovery. after a complete reboot you can safely wipe from recovery and flash custom roms.
BTW - this thread belongs to the QA forum.
chasmodo said:
You cannot flash PhilZ kernel on a GB Rom. It wouldn't boot up if you did.
Click to expand...
Click to collapse
but would let me use cwm to backup and flash another rom?
You can't flash ANYTHING from stock 3e GB recovery. It won't pass signature verification.
(Unlike ICS). You need to root it first, then use an app such as mobile odin to flash a kernel which has CWM recovery.
Sent from my GT-N7000 using xda app-developers app
Edit: to root GB without going through Dr. Ketans long winded process, just download Chainfires exynos app from here http://forum.xda-developers.com/showthread.php?p=35512626 click on it, and select root device
Sent from my GT-N7000 using xda app-developers app
unfort my kernel is not bugged. can i flash a bugged kernel?
i think i understood that i need to use odin to flash on a GB device? if so, i hope i can directly flash ultimate custom rom using odin?
1. Root Gb
2. Install Mobile Odin
3.Flash Cf-Root or Abyss (both are GB with CWM recovery)
4.Boot into recovery, do wipes and flash new ROM.
NOTE: custom roms can't be flashed with Odin.
Sent from my GT-N7000 using xda app-developers app
non rootable room ^^
Use the exnos abuse app to root.
Hey can i flash philz on 2.3.6 (rooted) format and install a JB rom?
Yes

help please

hai guys i am new on Samsung.. I need some help.i have rooted my sony and installed custom ROMS. And as I am new to samsung am little confused. how can i root my S advance and install custom ROM . do I need to unlock the bootloader for installing JB.Currently having a GB version with DDLK2 firmware.. cant find anything about DDLK2 on the forum. please help
http://forum.xda-developers.com/showthread.php?t=2198341
This should help. And please post in the right section
Sent from my GT-I9070 using xda premium
got a problem.. I tried this method http://forum.xda-developers.com/showthread.php?t=1660419 and when i tried to install DDLK2 firmware but failed and i installed rootkernal itself.. after am able to switch on the phone but it is continuously getting restarted.. help please..
Vivek ps said:
got a problem.. I tried this method http://forum.xda-developers.com/showthread.php?t=1660419 and when i tried to install DDLK2 firmware but failed and i installed rootkernal itself.. after am able to switch on the phone but it is continuously getting restarted.. help please..
Click to expand...
Click to collapse
use kies or find your firmware country on sammobile
and please read the rules of xda
ps: or use "update software" in sittings\ about phone\...\
what can i do when phone is contnsly getting restarted??.. when i removed the sim card. then phone is not getting restarted
did u upgrade to jellybean.? use odin software to upgrade .indian firmware is DDULP8 (jellybean) which can b downloaded frm devhost or sammobile.com
ajeshmanu said:
did u upgrade to jellybean.? use odin software to upgrade .indian firmware is DDULP8 (jellybean) which can b downloaded frm devhost or sammobile.com
Click to expand...
Click to collapse
don't i need to unlock the bootloader and root the device before upgrading to jellybean???
Vivek ps said:
got a problem.. I tried this method http://forum.xda-developers.com/showthread.php?t=1660419 and when i tried to install DDLK2 firmware but failed and i installed rootkernal itself.. after am able to switch on the phone but it is continuously getting restarted.. help please..
Click to expand...
Click to collapse
Just flash any GB kernel after that and you'll be fine. Search for cocore 4.1 for GB.
---------- Post added at 06:03 PM ---------- Previous post was at 06:00 PM ----------
Vivek ps said:
don't i need to unlock the bootloader and root the device before upgrading to jellybean???
Click to expand...
Click to collapse
No you don't need to unlock the bootloader as iur device is practically made unlocked. So yeah it is unlocked already. Just flash the official 4.1.2 JB samsung firmware. No root needed.
arffrhn said:
Just flash any GB kernel after that and you'll be fine. Search for cocore 4.1 for GB.
---------- Post added at 06:03 PM ---------- Previous post was at 06:00 PM ----------
No you don't need to unlock the bootloader as iur device is practically made unlocked. So yeah it is unlocked already. Just flash the official 4.1.2 JB samsung firmware. No root needed.
Click to expand...
Click to collapse
bro.. what u mean by already unlocked??? i didn't do anything to make its bootloader unlocked before.. so you are saying that we don't need to do anything to unlock the bootloader??..ok i will flash the official 4.1.2.. but what about the custom JB.. how can i flash the custom ROM?
Vivek ps said:
bro.. what u mean by already unlocked??? i didn't do anything to make its bootloader unlocked before.. so you are saying that we don't need to do anything to unlock the bootloader??..ok i will flash the official 4.1.2.. but what about the custom JB.. how can i flash the custom ROM?
Click to expand...
Click to collapse
We do not have to unlock bootloader.
Install CoCore kernel, you will get custom recovery. And install ROM with it.
1. ROOT.
2. CoCore.
For first install of CoCore do this: Install Universal kernel flash, and some explorer with root permissions like Root explorer or ES file explorer. Download CoCore zip, unpack it and use kernel.bin.md5 file with Universal kernel flash. After that you will get CWM or TWRP (depends what CoCore version you choose). From that part you can change kernel by installing its zip from recovery.
3. Download JB custom ROM, copy to phone - and install it from recovery.
Vivek ps said:
bro.. what u mean by already unlocked??? i didn't do anything to make its bootloader unlocked before.. so you are saying that we don't need to do anything to unlock the bootloader??..ok i will flash the official 4.1.2.. but what about the custom JB.. how can i flash the custom ROM?
Click to expand...
Click to collapse
Yeah just like shut_down says above..we do not have to unlock bootloader. We can just flash the firmware. Sorry for the confusion.
This guide will help you with the whole process of upgrading and installing custom roms.
http://forum.xda-developers.com/showthread.php?t=2198341
shut_down said:
We do not have to unlock bootloader.
Install CoCore kernel, you will get custom recovery. And install ROM with it.
1. ROOT.
2. CoCore.
For first install of CoCore do this: Install Universal kernel flash, and some explorer with root permissions like Root explorer or ES file explorer. Download CoCore zip, unpack it and use kernel.bin.md5 file with Universal kernel flash. After that you will get CWM or TWRP (depends what CoCore version you choose). From that part you can change kernel by installing its zip from recovery.
3. Download JB custom ROM, copy to phone - and install it from recovery.
Click to expand...
Click to collapse
thanks for your awesome rply.. i rooted my device (JB now) and gonna install the cocoreE 6.8 kernel . u said to flash kernel.bin.md5 file with Universal kernel flash.. and after doing this and accessing the custom cwm do i need to install the cocore kernel zip from it again before installing custom ROM?
Vivek ps said:
thanks for your awesome rply.. i rooted my device (JB now) and gonna install the cocoreE 6.8 kernel . u said to flash kernel.bin.md5 file with Universal kernel flash.. and after doing this and accessing the custom cwm do i need to install the cocore kernel zip from it again before installing custom ROM?
Click to expand...
Click to collapse
You do not need to do it again, but you could. Because there are some other files in that zip - and those are not being installed with Universal kernel flash.
shut_down said:
You do not need to do it again, but you could. Because there are some other files in that zip - and those are not being installed with Universal kernel flash.
Click to expand...
Click to collapse
thanks bro.. installed a custom JB on my phone..but i have a small doubt. is it possible to make my device UNROOTED after flashing the stock JB or GB again?? ( actually i dont' need it now.. just asking ) and also will i be able to go back to the stock kernel if i flashed the STock JB?? Because my warranty is not yet over
Vivek ps said:
thanks bro.. installed a custom JB on my phone..but i have a small doubt. is it possible to make my device UNROOTED after flashing the stock JB or GB again?? ( actually i dont' need it now.. just asking ) and also will i be able to go back to the stock kernel if i flashed the STock JB?? Because my warranty is not yet over
Click to expand...
Click to collapse
When you flash stock JB firmware (not ROM) you get all stock, ready to pass warranty.
If you want to go to GB, you need to follow guide how to do that. Because you will get bootloop if you just flash GB from Sammobile.
shut_down said:
When you flash stock JB firmware (not ROM) you get all stock, ready to pass warranty.
If you want to go to GB, you need to follow guide how to do that. Because you will get bootloop if you just flash GB from Sammobile.
Click to expand...
Click to collapse
thank you so much.. but why it is stock JB "Firmware" and not ROM ????
Vivek ps said:
thank you so much.. but why it is stock JB "Firmware" and not ROM ????
Click to expand...
Click to collapse
Firmware is untouched system, for flashing with Odin. And ROM is modded files that can be installed with custom recovery. In short.

[Q] Flash CWM

Hi!
Can I just download cwm from here https://www.clockworkmod.com/rommanager and flash it via stock recovery like I had done with all my other phones? (Stock android 4.1.2)
I read many forums about that I have to flash Philz kernel first and use odin but is it necessary anymore? I also tried to look different kernel+cwm versions from Philz but newest download doesnt have any different kernel version (or I just dont find them).
You will need to use philz to root. On this phone recovery is in kernel.
nokiamodeln91 said:
You will need to use philz to root. On this phone recovery is in kernel.
Click to expand...
Click to collapse
So I just download zip file from here and flash it using stock recovery? It its possible do without odin? Or why there is .zip and .tar.md5 and .zip.md5 from same version of recovery file?
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7000
No not that link.. There will be one for tw only.. Flash using recovery.. Tar version of the kernel can be flashed using Odin.. But flashing using Odin will increase the binary count..
nokiamodeln91 said:
No not that link.. There will be one for tw only.. Flash using recovery.. Tar version of the kernel can be flashed using Odin.. But flashing using Odin will increase the binary count..
Click to expand...
Click to collapse
You mean this -> http://d-h.st/users/philz_touch/?fld_id=25295#files
There is only XXLTA-ATL does it matter? Older cwm versions seems to have different version too.
After that I can flash roms and anything like with other phones?
Thanks for help!
That's that's one of the latest.. Match the rom version you have any other the kernel name and flash that.. Then you will be able to flash any rom but kitkat.
nokiamodeln91 said:
That's that's one of the latest.. Match the rom version you have any other the kernel name and flash that.. Then you will be able to flash any rom but kitkat.
Click to expand...
Click to collapse
But I want cyanogenmod 11. How can I flash it?
Flashing first cyanogenmod 10.x and then 11?

Categories

Resources