Related
So I've recently purchased an unlocked Sprint HTC One. I am able to use my current tmobile sim and am able to send/receive calls and texts. The only problem however, is that when I try to turn on the mobile data, it won't connect and just says "disconnected." Can anyone shed some light as how I can approach and resolve this problem?
Does the phone's GSM radio use the same frequencies for data that T-Mobile uses?
Sent from my HTCONE using Tapatalk 4 Beta
coal686 said:
Does the phone's GSM radio use the same frequencies for data that T-Mobile uses?
Sent from my HTCONE using Tapatalk 4 Beta
Click to expand...
Click to collapse
I know that the Sprint HTC ONE doesn't have the 1700 Mhz band, only the 1900Mhz. I've read that even if I'm not in an area that is refarmed to the 1900Mhz band, I'll still be getting edge. I live in the Los Angeles area so I'm more than likely to be in an refarmed area.
Connect to wifi and update PRL and profile.
If nothing, try forcing hands-free activation. In the dialer: ##72786#
The Thanks button is just to avoid "THANKS" posts in threads. Nothing more. Don't defeat the purpose of why it was introduced.
xlilazndanx said:
So I've recently purchased an unlocked Sprint HTC One. I am able to use my current tmobile sim and am able to send/receive calls and texts. The only problem however, is that when I try to turn on the mobile data, it won't connect and just says "disconnected." Can anyone shed some light as how I can approach and resolve this problem?
Click to expand...
Click to collapse
You probably need to setup T-Mobile's APN to get the data to work. Not sure how to do that on the One though.
BTW, expect GPRS/EDGE data to be quite slow, even if you do get it working.
I haven't had to do anything special with APNs for Tmo data. I get Edge in the non-1900mhz areas and HSPA+ in the 1900mhz areas.
In the Mobile Settings page... I have all roaming guard options unchecked. GSM data checked. Set to GSM/UMTS only. Search for networks.. click on Tmo... and away I go..
autoprime said:
I haven't had to do anything special with APNs for Tmo data. I get Edge in the non-1900mhz areas and HSPA+ in the 1900mhz areas.
In the Mobile Settings page... I have all roaming guard options unchecked. GSM data checked. Set to GSM/UMTS only. Search for networks.. click on Tmo... and away I go..
Click to expand...
Click to collapse
I've tried unchecking all roaming gaurd options and I still get the "disconnected" message. Do you mind sharing what your APN settings are?
xlilazndanx said:
I've tried unchecking all roaming gaurd options and I still get the "disconnected" message. Do you mind sharing what your APN settings are?
Click to expand...
Click to collapse
I've never touched anything related to APN. just select TMO after the network scan and use. Id assume the APN stuff is auto-populated by htc/sprint settings built in.
autoprime said:
I've never touched anything related to APN. just select TMO after the network scan and use. Id assume the APN stuff is auto-populated by htc/sprint settings built in.
Click to expand...
Click to collapse
I tried resetting the APN to default and reconnecting to the TMO network, however, I still can't get any mobile data. I'm hesitant to seek TMO for help as often times, they'll just reply saying that it's a Sprint model, so not everything will work.
So I got the mobile data to work, however, only when I'm out and in certain areas. At home, it still says "disconnected" however, if I'm out in some areas, I'm able to connect to the 1900MHz band. Is there a reason for this happening? Mind that I was only probably a mile away from my house.
Was there a solution to this ? This is my problem also in los Angeles
xlilazndanx said:
So I got the mobile data to work, however, only when I'm out and in certain areas. At home, it still says "disconnected" however, if I'm out in some areas, I'm able to connect to the 1900MHz band. Is there a reason for this happening? Mind that I was only probably a mile away from my house.
Click to expand...
Click to collapse
So I'm writing this guide for SGH-I537 (ATT Samsung Galaxy S4 Active) users who want to use their I537 on T-Mobile or other carriers that support AWS (Advanced Wireless Services; see: http://en.wikipedia.org/wiki/Advanced_Wireless_Services).
Initially I got my I537 and heard conflicting reports of DIY SIM unlocking being successful, supposedly some people unable to get the AWS bands. So, I played it safe and got the device unlock code straight from ATT. Everything seemed to work at a cursory glance, got LTE and fast speeds, great! Little did I know that I actually did not have AWS unlocked.
In my room I get nearly no reception and rely on a repeater to get signal and be able to do basic things like SMS, make calls, etc. I noticed that for some reason the I537 was not picking it up.
ATT runs their LTE over some TMO HSPA frequencies (AWS) and the phone by default won't do HSPA on those frequencies. An AWS unlock will allow the phone to do either LTE or HSPA on these frequencies, thus allowing it to talk to my repeater.
I followed the guide at http://galaxys4root.com/galaxy-s4-t...aws-bands-on-att-galaxy-s4-sgh-i337sgh-i337m/ but instead used the UMMS code of *#0808#
It works on the latest stock, unrooted ROM. My device was already SIM unlocked but I don't think that will make a difference for this process. I believe that one would require SIM unlock regardless, though, to use another network.
This guide unfortunately depends on Windows specific tools, so I had to use a Windows machine to do this. It's a pretty easy guide -- basically you tell the phone to expose its modem over USB, use a Qualcomm program to talk to it, do a backup of the NVRAM, and NV Restore someone's I337 NVRAM that has the AWS enabled.
It works perfectly for me and has worked for others as well (see comments on that guide). The only difference is we have to dial *#0808#
You may want to add the T-Mobile LTE APN as well:
Code:
Name : T-Mobile LTE
APN: fast.tmobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
APN Type: default,supl,admin,dun,mms
(From http://forum.xda-developers.com/showthread.php?t=2236735)
VytenisK said:
Does not work. My there is "No phone" message shown.
Click to expand...
Click to collapse
Which step did it fail at? Can you walk me through what you did?
EDIT: Did you go to Device Manager, and see the two Samsung COM ports? Then in the QPST tool, did you add those ports manually? Otherwise QPST wil always say "No phone"
VytenisK said:
I did everything as I should, but at the point where I should see zero (0), I do not. Tried it with several Windows machines with the same results. I am guessing it is something with the MF1 firmware. What firmware you are stranded on?
Click to expand...
Click to collapse
I am on MF3.
VytenisK said:
Just tried this on MF1 after doing Odin One Click back to the stock MF1. Installed drivers, QPST when I added new ports (4 and 5, all from Samsung) all of them says "No Phone". So I am guessing AWS unlock does not work on MF1. Maybe someone had same issues? Is there any other way installing qcn AWS file?
Click to expand...
Click to collapse
Is it SIM unlocked already or no?
VytenisK said:
Yes it is.
Click to expand...
Click to collapse
Very strange. I wish I knew the ansewr to this I stumbled upon the AWS unlock guide for I337 long time before I bought the I537. I guess I was lucky that it went without a hiccup then.
And you have the special Samsung drivers installed from that site and are sure some other drivers aren't trying to pick it p? =|
I would like to add that you should change the apn name to fast.tmobile.com (from epc.tmobile.com) that's how enabled 4g LTE in my city.
I would like to ask a 'stupid' question is there a way to enable 3g? It seems to be either edge or 4g/4gLTE for me, I've never seen my phone have a 3g icon.
For T-Mobile it's not going to show 3G afaik, it will default to showing 4G for any 3G or HSPA 4G mode. If you have LTE enabled (any of the LTE modes) then it'll show the 4G with "LTE" under the bottom right side. I leave my GS4A on T-Mobile with WCDMA Preferred which seems to offer the best speeds and connections. While T-Mobile is still working on their system here in Vegas and making improvements, the LTE aspect is of no use to me and just allows me to burn up my 5GB that much faster.
To change the modes you'll have to go into the *#*#4636#*#* menu and do it, again afaik. It's the least hassle free method I've found for myself so that's what I stick with.
And I've never changed the APN from epc to fast - it's worked since I did those same instructions to enable the AWS capability. I did change it one time but the speed tests ended up being effectively the same no matter which APN I used so I set it back to the default of epc.tmobile.com and have yet to have any issues.
yamugushi said:
I would like to add that you should change the apn name to fast.tmobile.com (from epc.tmobile.com) that's how enabled 4g LTE in my city.
Click to expand...
Click to collapse
Yeah, good call, I'll add the APN settings to this thread.
We have LTE in San Jose and San Francisco and it's REALLY fast and way better than the HSPA+ network. And it seems to switch to HSPA+ just fine if there's no LTE.
Added TMO LTE APN settings.
while the process went without a hitch for me, I did not see any improvements
I was getting 4G both before and after, no LTE
in fact, the speed went down fron 2.5MBPS to less 1MBPS !!
So i flashed the AT&T backup back!
might be cause I am in Seattle area
(it shows HSPAP:15 in the status in either case)
Mf3
Sent from my SAMSUNG-SGH-I537 using Tapatalk 4
HSPA isn't LTE, you have to enable that aspect manually. By default when you put a T-Mobile SIM in the GS4A it'll set itself up for GSM/CMDA usage, and you have to alter that to get the LTE working, at least I did in my case.
I went into the service menu using *#*#4636#*#* and changed it from GSM/CDMA auto (PRL) to LTE/GSM auto (PRL) and you should reconnect and get the proper 4G/LTE symbol noting the type of connection (4 with smaller G above the letters LTE).
Here in Las Vegas that's all I have to do to enable LTE (it'll show as LTE:14). I don't use it because the actual LTE signal strength is like -105 dB here at home; when I switch it over to WCDMA Preferred it increases to -78 dB and the speeds are very fast with HSPA:10 or even HSPA:15 on occasion, and LTE drains the battery more as well (in my testing).
That's my usage and experience, maybe making some alterations with your service menu can improve performance for you. T-Mobile is still doing the upgrades across their whole network so, what might have crappy signal coverage now might improve soon.
My suggestion is try each of the potential connection methods and find the one with the best signal strength and the best speeds - for me, again, that turned out to be using WCDMA Preferred, and I'm right across the street (line of sight) with a T-Mobile leased cell site, just about 1200 feet from me with nothing in the way either when I'm here at home.
Also, I've never had to edit the APN info on my GS4A for use with T-Mobile. I know the recommendation is to alter it from epc.tmobile.com to fast.tmobile.com but since mine works just by altering the radio connection and ends up getting the same speeds (I've tested both APNs), I just stick with the default of epc.tmobile.com and I haven't had any issues worth noting. I did read some comments that said in some areas to get the LTE working properly you DO need to use fast.tmobile.com, but for me I haven't - could be something to check into for yourself.
br0adband said:
HSPA isn't LTE, you have to enable that aspect manually. By default when you put a T-Mobile SIM in the GS4A it'll set itself up for GSM/CMDA usage, and you have to alter that to get the LTE working, at least I did in my case.
I went into the service menu using *#*#4636#*#* and changed it from GSM/CDMA auto (PRL) to LTE/GSM auto (PRL) and you should reconnect and get the proper 4G/LTE symbol noting the type of connection (4 with smaller G above the letters LTE).
Here in Las Vegas that's all I have to do to enable LTE (it'll show as LTE:14). I don't use it because the actual LTE signal strength is like -105 dB here at home; when I switch it over to WCDMA Preferred it increases to -78 dB and the speeds are very fast with HSPA:10 or even HSPA:15 on occasion, and LTE drains the battery more as well (in my testing).
That's my usage and experience, maybe making some alterations with your service menu can improve performance for you. T-Mobile is still doing the upgrades across their whole network so, what might have crappy signal coverage now might improve soon.
My suggestion is try each of the potential connection methods and find the one with the best signal strength and the best speeds - for me, again, that turned out to be using WCDMA Preferred, and I'm right across the street (line of sight) with a T-Mobile leased cell site, just about 1200 feet from me with nothing in the way either when I'm here at home.
Also, I've never had to edit the APN info on my GS4A for use with T-Mobile. I know the recommendation is to alter it from epc.tmobile.com to fast.tmobile.com but since mine works just by altering the radio connection and ends up getting the same speeds (I've tested both APNs), I just stick with the default of epc.tmobile.com and I haven't had any issues worth noting. I did read some comments that said in some areas to get the LTE working properly you DO need to use fast.tmobile.com, but for me I haven't - could be something to check into for yourself.
Click to expand...
Click to collapse
Thanks!
just changed this, but no LTE so far, but this could be cause I am in a highrise right now
---------- Post added at 03:13 PM ---------- Previous post was at 02:31 PM ----------
ledocbio said:
Thanks!
just changed this, but no LTE so far, but this could be cause I am in a highrise right now
Click to expand...
Click to collapse
I reflashed the tmobile file
I am still not getting LTE, but definitely getting more bars
interestingly, there was no change initially, but after 15 minutes i started getting better signal strength...
still, no LTE (
ledocbio said:
Thanks!
just changed this, but no LTE so far, but this could be cause I am in a highrise right now
---------- Post added at 03:13 PM ---------- Previous post was at 02:31 PM ----------
I reflashed the tmobile file
I am still not getting LTE, but definitely getting more bars
interestingly, there was no change initially, but after 15 minutes i started getting better signal strength...
still, no LTE (
Click to expand...
Click to collapse
Got LTE running on the opposite corner of my building, with abysmal speeds!
the LTE coverage in Bellevue/Redmond seems to be either very spotty, or very incompatible with S4A, not sure which it is... but overall the internet speeds are better with HSPA+ than LTE in any case...
Thanks guys for you help
Sweet
Sent from my mikTouch_4G_Slide using xda app-developers app
anyone else find their S4A sluggish on T-mobile (before or after) this?
Hi
mnasledov said:
So I'm writing this guide for SGH-I537 (ATT Samsung Galaxy S4 Active) users who want to use their I537 on T-Mobile or other carriers that support AWS (Advanced Wireless Services; see: http://en.wikipedia.org/wiki/Advanced_Wireless_Services).
Initially I got my I537 and heard conflicting reports of DIY SIM unlocking being successful, supposedly some people unable to get the AWS bands. So, I played it safe and got the device unlock code straight from ATT. Everything seemed to work at a cursory glance, got LTE and fast speeds, great! Little did I know that I actually did not have AWS unlocked.
In my room I get nearly no reception and rely on a repeater to get signal and be able to do basic things like SMS, make calls, etc. I noticed that for some reason the I537 was not picking it up.
ATT runs their LTE over some TMO HSPA frequencies (AWS) and the phone by default won't do HSPA on those frequencies. An AWS unlock will allow the phone to do either LTE or HSPA on these frequencies, thus allowing it to talk to my repeater.
I followed the guide at http://galaxys4root.com/galaxy-s4-t...aws-bands-on-att-galaxy-s4-sgh-i337sgh-i337m/ but instead used the UMMS code of *#0808#
It works on the latest stock, unrooted ROM. My device was already SIM unlocked but I don't think that will make a difference for this process. I believe that one would require SIM unlock regardless, though, to use another network.
This guide unfortunately depends on Windows specific tools, so I had to use a Windows machine to do this. It's a pretty easy guide -- basically you tell the phone to expose its modem over USB, use a Qualcomm program to talk to it, do a backup of the NVRAM, and NV Restore someone's I337 NVRAM that has the AWS enabled.
It works perfectly for me and has worked for others as well (see comments on that guide). The only difference is we have to dial *#0808#
You may want to add the T-Mobile LTE APN as well:
Code:
Name : T-Mobile LTE
APN: fast.tmobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
APN Type: default,supl,admin,dun,mms
(From http://forum.xda-developers.com/showthread.php?t=2236735)
Click to expand...
Click to collapse
Wen I get to Device Manager I dont see COM24 I see COM6 and COM7. Do you know what to do in that situation???
jci8926 said:
Wen I get to Device Manager I dont see COM24 I see COM6 and COM7. Do you know what to do in that situation???
Click to expand...
Click to collapse
Try each. One of them should come up as the phone.
SIM Unlocked on T-Mobile in Orlando:
Before Samsung replaced my Active I was running MF1, this hack wouldn't work. They sent me a new replacement with MF3 Monday. This worked!! Places where I get "E" are now "4g"!!
Awesome! I was almost going to sell it for a Nexus 5 due to this problem but not anymore!
So I've gone through all the steps and now I am at the part where I add the APN but I can't seem to find the MMS Protocol section. I've also heard we should use fast.t-mobile.com instead of the fast.tmobile.com, would that matter??
Hey All,
I searched the web on and on and cant figure it out.
My provider Vodafone in holland provides me with 4G.
On some sites i read there is a minor update which activates the LTE option.
that update is for the I9505..
I cant find if its possible to unlock my LTE option.
i have the I9295. And throug kies or OTA is no update
I hope you can help me out guys.
Thaantje said:
Hey All,
I searched the web on and on and cant figure it out.
My provider Vodafone in holland provides me with 4G.
On some sites i read there is a minor update which activates the LTE option.
that update is for the I9505..
I cant find if its possible to unlock my LTE option.
i have the I9295. And throug kies or OTA is no update
I hope you can help me out guys.
Click to expand...
Click to collapse
I can't really help you but as far as I know LTE is already unlocked and working on all international S4 Actives. Mine certainly worked perfectly out of the box - although I turned it off promptly because I have ****ty 4G coverage where I live so it was nothing but a battery drain for me.
Are you sure you have a 4G sim card, and that you are in an area where 4G has coverage?
If you go in under settings > connections > more networks > mobile networks > network mode don't you have the LTE option at the top?
Cederic said:
I can't really help you but as far as I know LTE is already unlocked and working on all international S4 Actives. Mine certainly worked perfectly out of the box - although I turned it off promptly because I have ****ty 4G coverage where I live so it was nothing but a battery drain for me.
Are you sure you have a 4G sim card, and that you are in an area where 4G has coverage?
If you go in under settings > connections > more networks > mobile networks > network mode don't you have the LTE option at the top?
Click to expand...
Click to collapse
Im not 100% but i got the textmessage from my provider, so i recon they only send it to people who are able to use the 4G.
Yes, i am in a 4g coverage area
i dont have the LTE option at the top no. i have:
- wcdma/gsm
- only wcdma
- only gsm
Thaantje said:
Im not 100% but i got the textmessage from my provider, so i recon they only send it to people who are able to use the 4G.
Yes, i am in a 4g coverage area
i dont have the LTE option at the top no. i have:
- wcdma/gsm
- only wcdma
- only gsm
Click to expand...
Click to collapse
Well then I really have no idea - the only thing I can think of is that you might need to replace your sim card if your provider didn't already do so in advance of the 4G rollout. Hopefully someone with more information might step in here, but the international version is LTE capable out of the box. If you don't hear anything else I'd suggest to try and contact vodafone and get a clear answer from them first.
If you check the mobile networks in your area and don't see anything that supports LTE, you may just live in an area that doesn't have it yet (people get 4G and LTE somewhat mixed up - 4G is the overall identifier for a whole class of technologies with "4th generation cellular networks" basically while LTE is technically one of those technologies so, it should rightfully be classified as 4G in most respects.
Having said that, the only way I got my GS4A to function in LTE mode - meaning it actually shows LTE in the notification bar under the 4 with a small G and LTE underneath it - was to go into the service menu (*#*#4636#*#*) and change the preferred network type to either LTE only or LTE/GSM auto (PRL). Once I did that the radio would reset and connect and then it would be in proper LTE mode. Doing a speedtest with the Speedtest.net app shows LTE as the connection whereas with my standard setting which is WCDMA Preferred (T-Mobile AWS) it'll just show as "4G."
I've had no luck making alterations in the Settings/Mobile Networks section, I have to change it in the service menu to get LTE functional. I don't use it because here in Vegas where I live (specifically my home location) the LTE mode gets me about 1-2 bars of signal (about 8-12Mbps) whereas the WCDMA Preferred setting pulls in 5 bars rock solid and 25-35Mbps.
Can't do screenshots or I'd add them, I'm running the pre-release MI2 ROM presently and that aspect is borked.
br0adband said:
If you check the mobile networks in your area and don't see anything that supports LTE, you may just live in an area that doesn't have it yet (people get 4G and LTE somewhat mixed up - 4G is the overall identifier for a whole class of technologies with "4th generation cellular networks" basically while LTE is technically one of those technologies so, it should rightfully be classified as 4G in most respects.
Having said that, the only way I got my GS4A to function in LTE mode - meaning it actually shows LTE in the notification bar under the 4 with a small G and LTE underneath it - was to go into the service menu (*#*#4636#*#*) and change the preferred network type to either LTE only or LTE/GSM auto (PRL). Once I did that the radio would reset and connect and then it would be in proper LTE mode. Doing a speedtest with the Speedtest.net app shows LTE as the connection whereas with my standard setting which is WCDMA Preferred (T-Mobile AWS) it'll just show as "4G."
I've had no luck making alterations in the Settings/Mobile Networks section, I have to change it in the service menu to get LTE functional. I don't use it because here in Vegas where I live (specifically my home location) the LTE mode gets me about 1-2 bars of signal (about 8-12Mbps) whereas the WCDMA Preferred setting pulls in 5 bars rock solid and 25-35Mbps.
Can't do screenshots or I'd add them, I'm running the pre-release MI2 ROM presently and that aspect is borked.
Click to expand...
Click to collapse
I can check my area on the vodafone site. I live in a 4G network area 100%!
i guess my wcdma is sufficient then.. didnt experience speedboost tho..
br0adband said:
I've had no luck making alterations in the Settings/Mobile Networks section, I have to change it in the service menu to get LTE functional.
Click to expand...
Click to collapse
That would be because you're on the i537 from ATT, rather than the i9295 that this discussion is about. I checked google and vodafone holland does indeed use LTE on the right bands in its brand new rollout, so it isn't that - most likely it's his sim that needs replacing or it's just not activated on his account yet.
Hey guys
So I looked around the forum for an answer to this question and i found similar topics but not exactly what I was looking for. I have the HTC one with sprint and the only issue I have with it is how it handles its preferred networks. If have 2 bars of LTE but 4-5 bars of 3g its going to stay on 3g and not switch to LTE. Is there anyway to change how it gives each signal preference. Currently it will wait till there is no 3g signal before it switches to 2g but LTE is not giving the same preference. I know it's just this phone because I had the iphone 5 before this and when I was on campus at my university it would stick to the 1 bar of LTE i had rather than switching to 3g. If I force the phone in LTE only mode then it will pick the LTE signal but then I can't call and text obviously so it's not very useful.
There are two things that the iphone 5 did which I miss but otherwise love this phone. One is getting LTE in places that has low coverage and the other is roaming on verizon network on 3g. The iphone would always roam on 3g but the htc one only roams on 2g.
Is there a way to change those things with this phone? Thanks in advance!
onelight17 said:
Hey guys
So I looked around the forum for an answer to this question and i found similar topics but not exactly what I was looking for. I have the HTC one with sprint and the only issue I have with it is how it handles its preferred networks. If have 2 bars of LTE but 4-5 bars of 3g its going to stay on 3g and not switch to LTE. Is there anyway to change how it gives each signal preference. Currently it will wait till there is no 3g signal before it switches to 2g but LTE is not giving the same preference. I know it's just this phone because I had the iphone 5 before this and when I was on campus at my university it would stick to the 1 bar of LTE i had rather than switching to 3g. If I force the phone in LTE only mode then it will pick the LTE signal but then I can't call and text obviously so it's not very useful.
There are two things that the iphone 5 did which I miss but otherwise love this phone. One is getting LTE in places that has low coverage and the other is roaming on verizon network on 3g. The iphone would always roam on 3g but the htc one only roams on 2g.
Is there a way to change those things with this phone? Thanks in advance!
Click to expand...
Click to collapse
Have you tried changing the preferred in the *#*#4636*#*# > Phone Information?
Hi thanks for the response. Yes I have messed around with that. That's how I got the LTE only option. It isn't a matter of not finding LTE signal. It's just the way the phone handles what is perferred. The phone first sees if there is a strong LTE signal and it catches that but the moment it goes to about 3 bars or less it will switch to 3g. I want it to continue sticking with LTE until the signal is gone completely like it does with 3g -> 2g.
onelight17 said:
Hi thanks for the response. Yes I have messed around with that. That's how I got the LTE only option. It isn't a matter of not finding LTE signal. It's just the way the phone handles what is perferred. The phone first sees if there is a strong LTE signal and it catches that but the moment it goes to about 3 bars or less it will switch to 3g. I want it to continue sticking with LTE until the signal is gone completely like it does with 3g -> 2g.
Click to expand...
Click to collapse
If its that way then I belive a builder will be able to forge a flashable zip for that purpose.
Terramoto said:
If its that way then I belive a builder will be able to forge a flashable zip for that purpose.
Click to expand...
Click to collapse
I see. And who do I ask for that? Or how can I build one? Sorry I am a bit of a rookie in this. I don't want to mess around with it too much but can learn. I thought there might already be some sort of hack or a modded PRL.
any new insight on this by anyone? thanks
I have lte at my work if I do lte only but it will switch to 3g when i turn everything else one because 3g signal is stronger than lte. id rather use lte however but still have my texting and calling capabilities.
onelight17 said:
any new insight on this by anyone? thanks
I have lte at my work if I do lte only but it will switch to 3g when i turn everything else one because 3g signal is stronger than lte. id rather use lte however but still have my texting and calling capabilities.
Click to expand...
Click to collapse
I know it's not an optimal solution, but have you considered using Google Voice integration in the meantime? With LTE only mode, so long as you're signed into an app of choice (Google Voice/Hangouts should be able to handle your calls and texts if you tweak at it a bit), you should have the desired service until you can get some dev help.
I have an unlocked Galaxy S4 active i9295 and I cannot get the 4G or the LTE working since I do not have even the option I only have WCDMA/GSM I travel around the world with this phone and now I am in Ireland on 3 and still I am getting H+ showing and not LTE or 4G. Is there a way to activate 4G or is there any special 4G sims ?
I would check your APN settings, seeing how you are unlocked, the proper APN may not be installed to match your Sim, check with your carrier, to make sure they are 4G and LTE capable and get their settings.
Sent Via Smoke Signals
Try ShowServiceMode. It should help to unlock LTE band. It worked for me here in Poland, because local career's LTE was locked by my Russian firmware. But using this program I can only switch between phone calls (GSM/3G) and LTE, they cannot work simultaneously.
Thank you guys. One major thing is that why I can even see the option in the settings? If anyone else has some information please help out.
Thanks