Database Develop

So, I'm new to Galaxy S. Need Help :)

Hi guys,
I own a Galaxy S i9000 mobile.
It's running on :
Android 2.3.3
Baseband : DXJV9
I have not rooted it or did anything till now.
I wanna flash ICS AOKP on my mobile..
I have tried using the search option but still im soo deserted.
Can you guys guide me on how to root,flash CWM recovery, and flash ICS please ?
and Does Galaxy S supports ROM Manager ? coz i've been using Galaxy Ace before and it didn't support it..
Thanks a lot

For Root read this.
http://forum.xda-developers.com/showthread.php?t=788108
You need to download file ending in JVP. Usually you want the one ending with last 3 digits of your baseband but as there is no JV9 JVP is close enough and is reported as working. Besides it does not really matter as you just need this for root.
Once you have root you can simply follow the guide in the AOKP thread...
http://forum.xda-developers.com/showthread.php?t=1524108
I know you have stated you want AOKP but if you want a bullet proof simple way to get this all done start with this thread for Team ICSSGS.
http://forum.xda-developers.com/showthread.php?t=1494493
I usually like to make sure I have all necessary files, roms & programmes before starting so if anything goes wrong I can get my phone working again. This tutorial will help you with that also.
After following all of this you should have a good understanding of what to do and then you can flash AOKP as their instructions are kind of limited.
Also when choosing an ICS Rom this is a great thread with regards to performance.
http://forum.xda-developers.com/showthread.php?t=1554621

AOKP is a wonderful choice.
But if I can give you an advice, wait for the next Milestone which is expected to be released over the next few days

scubadude said:
For Root read this.
http://forum.xda-developers.com/showthread.php?t=788108
You need to download file ending in JVP. Usually you want the one ending with last 3 digits of your baseband but as there is no JV9 JVP is close enough and is reported as working. Besides it does not really matter as you just need this for root.
Once you have root you can simply follow the guide in the AOKP thread...
http://forum.xda-developers.com/showthread.php?t=1524108
I know you have stated you want AOKP but if you want a bullet proof simple way to get this all done start with this thread for Team ICSSGS.
http://forum.xda-developers.com/showthread.php?t=1494493
I usually like to make sure I have all necessary files, roms & programmes before starting so if anything goes wrong I can get my phone working again. This tutorial will help you with that also.
After following all of this you should have a good understanding of what to do and then you can flash AOKP as their instructions are kind of limited.
Also when choosing an ICS Rom this is a great thread with regards to performance.
http://forum.xda-developers.com/showthread.php?t=1554621
Click to expand...
Click to collapse
Thanks for replying..
And where can i get the Odin and the .ops file for Galaxy S?
Thanks again

You must register to download anything.
http://www.sammobile.com/
This link has passwords & instructions for sammobile firmware downloads.
http://www.sammobile.com/firmware/?page=-1
Firmware link for Galaxy s i9000
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9000&r=-1#modelsa
Odin (choose i9000)
http://www.sammobile.com/firmware/?page=5&t=1&o=1#osa
flash guide if you want it (choose i9000)
http://www.sammobile.com/firmware/?page=6&t=1&o=1#osa

scubadude said:
You must register to download anything.
http://www.sammobile.com/
This link has passwords & instructions for sammobile firmware downloads.
http://www.sammobile.com/firmware/?page=-1
Firmware link for Galaxy s i9000
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9000&r=-1#modelsa
Odin (choose i9000)
http://www.sammobile.com/firmware/?page=5&t=1&o=1#osa
flash guide if you want it (choose i9000)
http://www.sammobile.com/firmware/?page=6&t=1&o=1#osa
Click to expand...
Click to collapse
Thank you soo much for your help bro

That link for flashing Team ICSSGS has help for everything else. From downloading stock rom to flashing with Odin to flashing ics (in this case team icssgs)
You could potential substitute Team ICSSGS for AOKP.

I got another question..
does Semaphore ICS kernel works on my baseband (i.e - DXJV9) ?

Will do. My favourite.
Sent from my GT-I9000 using Tapatalk 2

scubadude said:
Will do. My favourite.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Great
and finally, Which version of the kernel should i use for official AOKP b34? 1.1.0 or 1.1.0s?

Not sure but both should work. 1.0.1s is for slim ics and other roms. If it is not compatible it will break 720 video recording & playback otherwise eveything else should work. There is also a video patch somewhere.
Sent from my GT-P7500 using Tapatalk 2

scubadude said:
Not sure but both should work. 1.0.1s is for slim ics and other roms. If it is not compatible it will break 720 video recording & playback otherwise eveything else should work. There is also a video patch somewhere.
Sent from my GT-P7500 using Tapatalk 2
Click to expand...
Click to collapse
Alright..I've flashed AOKP b34 and Semaphore 1.1.0s
Everything seems to be fine
But now my sdcard is mounted as internal storage and the actual internal storage is mounted as sdcard..is this a bug or what ?
Even when I connect my phone to my PC using USB,only the actual internal storage (which is mounted as SDcard shows up..

I personally haven't 1.1.0 only 1.0.1sbm with slim ics. I think the 1.1.0 is still a test version for cm9 but could be wrong. Things may have updated since i last looked but i recommend reading the semaphore thread and posting there for more help.
Sent from my GT-P7500 using Tapatalk 2

Hello another sg user
Sent from my GT-I9000 using xda premium

Suggest ICS rom for you
I would like to suggest ICS rom for you
http://forum.xda-developers.com/showthread.php?t=1560524&highlight=aroma
This is quite easily to install because it have menu interactive to do with and it quite smooth when use it.

http://hdtechvideo.com/community/index.php
go here
http://www.darkyrom.com/community/index.php?threads/discuss-custom-ics-roms-for-sgs1-here.7309/

Sys81 said:
Hello another sg user
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Hey!
TIGER 123 said:
http://hdtechvideo.com/community/index.php
go here
http://www.darkyrom.com/community/index.php?threads/discuss-custom-ics-roms-for-sgs1-here.7309/
Click to expand...
Click to collapse
frankind said:
I would like to suggest ICS rom for you
http://forum.xda-developers.com/showthread.php?t=1560524&highlight=aroma
This is quite easily to install because it have menu interactive to do with and it quite smooth when use it.
Click to expand...
Click to collapse
scubadude said:
I personally haven't 1.1.0 only 1.0.1sbm with slim ics. I think the 1.1.0 is still a test version for cm9 but could be wrong. Things may have updated since i last looked but i recommend reading the semaphore thread and posting there for more help.
Sent from my GT-P7500 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for helping..
I switched to SlimICS and Semaphone 1.1.1 and it fixed it all..
and now the only problem I'am facing is that WiFi Tethering is not working..Is it just for me or it doesn't work for all of you people ?

Hameedhudeen said:
Hey!
Thanks for helping..
I switched to SlimICS and Semaphone 1.1.1 and it fixed it all..
and now the only problem I'am facing is that WiFi Tethering is not working..Is it just for me or it doesn't work for all of you people ?
Click to expand...
Click to collapse
Known bug in Semaphore. Make sure you enable the 'Netfilter' module in the app. When it randomly doesn't work, which is the bug, simply check and uncheck it 2 times and it will work.

Well it seems dat u gettin alot of hlp alrdy bt u need hlp like immediately u can pm me ur hp no.
Sent from my GT-I9000 using xda premium

upichie said:
Known bug in Semaphore. Make sure you enable the 'Netfilter' module in the app. When it randomly doesn't work, which is the bug, simply check and uncheck it 2 times and it will work.
Click to expand...
Click to collapse
That fixes it.
Thank you
Sys81 said:
Well it seems dat u gettin alot of hlp alrdy bt u need hlp like immediately u can pm me ur hp no.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Yea, I got a lots of help by this thread..
Thanks all!
Now, The only problem I'am experiencing is a little more battery drain when compared to GB.
I am gonna experiment with modems..

[Q] Galaxy note Cyanongenmod 9 upgrade from ICS stock rom

Hey Guys, I want to flash Cyanogenmod 9 on my Note. But I can't wipe my note because maybe I brick it with the original ICS kernel. Is there a Kernel, so I can upgarde to Cyanogenmod 9?
Thx , Eric (I'm new here ;-)

Read first post in cm9 thread its stated there. Also read the whole cm9 thread, every single post and you wil find hundreds asking same...
Sent from my GT-N7000 using Tapatalk 2

baz77 said:
Read first post in cm9 thread its stated there. Also read the whole cm9 thread, every single post and you wil find hundreds asking same...
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thank you dude, I flashed now Goku Kernel it Works! Can I install now Cyanogenmod 9 on my Note or is there also a brick?

Eric-Mod said:
Thank you dude, I flashed now Goku Kernel it Works! Can I install now Cyanogenmod 9 on my Note or is there also a brick?
Click to expand...
Click to collapse
No just go on with the flashing and nothing will probably happen.

Ok i will try to install cyanogenmod 9...

DONE!! Thank you guys it worked D now.. where can I find the gapps ?
I'm so happy now

Eric-Mod said:
DONE!! Thank you guys it worked D now.. where can I find the gapps ?
I'm so happy now
Click to expand...
Click to collapse
You can download them in the CM9 thread.
But I hate these answers too, so you can download them here:http://goo.im/gapps/gapps-ics-20120429-signed.zip

Which custom rom and kernel?

Hello all,
i have the samsung i9070 and i want a new custom rom on it.
For long battery life and clean rom without any **** on it and it must be fast with no lagg or anything and everything must work 100%
anyway can help me out?
Greets

yasje said:
Hello all,
i have the samsung i9070 and i want a new custom rom on it.
For long battery life and clean rom without any **** on it and it must be fast with no lagg or anything and everything must work 100%
anyway can help me out?
Greets
Click to expand...
Click to collapse
Some music wish alongside all that wishes?
Use CM10.1. I am using it for some time.
I will try OmniRom soon.
Sent from my GT-I9070 using Tapatalk

shut_down said:
Some music wish alongside all that wishes?
Use CM10.1. I am using it for some time.
I will try OmniRom soon.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
ok cool, but what is omni?
and isnt it tha tthe 10.1 version has some bugs and 10.0 is 100% perfect?

I won´t recommend CM10.1 and/or CM10.2 because they are not fully working.
I´ve used both of them in the last months and they have some bugs, for example, GPS works very bad for me.
I´m also thinking about changing my rom and kernel mostly because of the GPS issue.
Anyone to recommend?
LightJB or HarshJelly?

BachuArg said:
I won´t recommend CM10.1 and/or CM10.2 because they are not fully working.
I´ve used both of them in the last months and they have some bugs, for example, GPS works very bad for me.
I´m also thinking about changing my rom and kernel mostly because of the GPS issue.
Anyone to recommend?
LightJB or HarshJelly?
Click to expand...
Click to collapse
Can you help me where to download cwm 10.0?
and how to 2.3.6 to cwm 10.0?

yasje said:
Can you help me where to download cwm 10.0?
and how to 2.3.6 to cwm 10.0?
Click to expand...
Click to collapse
You will need to upgrade to 4.1.2 JB. Look for guides on our phone section. It is past midnight here, I am waking up early. So search, оr I will post tomorrow. You will find out sure.
Sent from my GT-I9070 using Tapatalk

shut_down said:
You will need to upgrade to 4.1.2 JB. Look for guides on our phone section. It is past midnight here, I am waking up early. So search, оr I will post tomorrow. You will find out sure.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
is it possible to from: 2.3.6 rooted gb to 4.1 jb?
ye post it for me if you want, i go to bed

yasje said:
is it possible to from: 2.3.6 rooted gb to 4.1 jb?
ye post it for me if you want, i go to bed
Click to expand...
Click to collapse
Yes.
For the questions you are asking, I think it´s the first time you´ll be doing this.
So first of all I recommend you to get into the developers section and read carefully all the procedure of how to flash, root and other things. If you try doing things without reading before, you might brick your phone.

@yasje
You can fin some informations here:
[INDEX/GUIDE][JB][i9070/9070P] Everything related to JB can be found here!
[{INDEX of GUIDES/TUTORIALS}] Galaxy S Advance [GT-I9070]

yasje said:
is it possible to from: 2.3.6 rooted gb to 4.1 jb?
ye post it for me if you want, i go to bed
Click to expand...
Click to collapse
Like @BachuArg said, read first - then try.
Be carefull, do not install I9070P JB on I9070 phone and I9070 firmware on I9070P phone. That will cause hard brick!!!
And do not use Hong Kong firmware, it will be stuck on that firmware.

So.
step 1. update rooted 2.3.6 to official jb?
step 2. download custom rom.
step 3 flash
step 4 wipe data/ blablalba
step 5 tada done
am i right? ^^

yasje said:
So.
step 1. update rooted 2.3.6 to official jb?
step 2. download custom rom.
step 3 flash
step 4 wipe data/ blablalba
step 5 tada done
am i right? ^^
Click to expand...
Click to collapse
Nope.
You must ROOT you new firmware JB, then flash custom hernel (Cocore) and only after these steps you can continue with step 2, 3 blablabla. :highfive:
Follow this guide and all will be fine: [GUIDE] From stock GB to Custom JB (Noob-friendly)

ok i gonna do it now!

hotfile isnt working nayway more , where do i download stock jb?

nevermind already got it.
where can i download cm 10.0?

yasje said:
nevermind already got it.
where can i download cm 10.0?
Click to expand...
Click to collapse
CM10.0 is older, and do not have camera and OMX fixed as I remember. Use 10.1.

shut_down said:
CM10.0 is older, and do not have camera and OMX fixed as I remember. Use 10.1.
Click to expand...
Click to collapse
i tought the 10.1 was bugged also?
i just want a 100% working clean and fast.
so sitll 10.1? where to download? and which kernel?

yasje said:
i tought the 10.1 was bugged also?
i just want a 100% working clean and fast.
so sitll 10.1? where to download? and which kernel?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=47566901&highlight=d-h+st#post47566901
No need to change kernel. But it has red border sometime, it is explained how to remove it - read couple of posts later.
P.S. We all want 100% working clean and fast ROM. But we do not have sources to make it 100%. You can try it, and if you do not like it - you can go back to stock.
Explore, read, learn, try... That is what is Android about.

red border ok?
and camera wifi direct and other stuff does working normally? and the rom isnt laggy or slow at all?

nvm i used cocor kernel 8.2 smooth and fast as hell
only i doubt choosing a rom: omni rom or harsjelly?

Galacy Ace hanging on bluescreen with CWM 6

Hi,
I had CWM 5.0.2.6 and CM 10.2 installed.
I thought I could upgrade CWM to v6 for future kitkat builds, but now and followed the "How to Get it" instructions.
But now both is not working, I can not reach the recovery and CM is also not booting, every time after the Samsung boot logo comes a blue screen.
Hope someone can help me :/

I tried to go back with odin with this tutorial from androidforums (guide-how-unbrick-upgrade-downgrade-your-sga-gt-s5830), but it seems that some driver is missing. I installed kies before, so the driver should be installed.
EDIT:
kies reinstall worked, passed flashing, but now it ends in a boot loop.
ok, data and cache wipe worked
my modifications are gone, but I am happy that the phone is booting again

Same here...
This same thing happened to my old ace when installing a Galaxy s3 rom based of CM 10.2! I could boot in to CWM fortunately, and flashed another working rom. Just be careful, when the bluescreen thing happens the screen on mine also went red. I was very, very scared. And somewhat felt unsafe using ODIN. I mean red is a dangerous color, right?
Also i managed to get the rom working. It needed a EXT4... lol. Maybe what happened to you? Dunno. Stay away from an error you have fixed.
" Be nice to nerds, you may work for one someday" Bill Gates

I do not know that the red color means, maybe someone else?
On my side the blue screen appears after flashing another CWM version and not another rom, my CM10.2 worked with CWM 5.0.2.6 fine.

Ah yeah
maven33 said:
I do not know that the red color means, maybe someone else?
On my side the blue screen appears after flashing another CWM version and not another rom, my CM10.2 worked with CWM 5.0.2.6 fine.
Click to expand...
Click to collapse
Ah fair enough lol .The Galaxy Ace is a great phone once it's rooted.
And this rom is an essential http://forum.xda-developers.com/showthread.php?t=2234221

XxAuzzi3L3g3ndx said:
Ah fair enough lol .The Galaxy Ace is a great phone once it's rooted.
And this rom is an essential http://forum.xda-developers.com/showthread.php?t=2234221
Click to expand...
Click to collapse
I did not test this rom yet, but now it is on my todo list

maven33 said:
I did not test this rom yet, but now it is on my todo list
Click to expand...
Click to collapse
It is a great rom. It offers awesome performance, battery and sound quality. Wait untill you try it... NO more things on your to do list!
The best part is it's swap kernel. The ace is far to slow, no thanks to the 280MB ram, so swap helps. Also their is alot of optimizations for our adreno 200 and single core cpu tweaks work amazing! Put it on top of your to do list man!

CWM works despite the bluescreen. Follow this guide to flash roms:
http://forum.xda-developers.com/showthread.php?p=49631367

maven33 said:
I did not test this rom yet, but now it is on my todo list
Click to expand...
Click to collapse
XxAuzzi3L3g3ndx said:
It is a great rom. It offers awesome performance, battery and sound quality. Wait untill you try it... NO more things on your to do list!
The best part is it's swap kernel. The ace is far to slow, no thanks to the 280MB ram, so swap helps. Also their is alot of optimizations for our adreno 200 and single core cpu tweaks work amazing! Put it on top of your to do list man!
Click to expand...
Click to collapse
But always remember - swap is destroying your micro SD card.
Gesendet von meinem Nexus 5 mit Tapatalk

yeah
Blackbox421 said:
But always remember - swap is destroying your micro SD card.
Gesendet von meinem Nexus 5 mit Tapatalk
Click to expand...
Click to collapse
True, but i try and set it at only use 20-30% of the time. And that's is true, i have seen a massive degree drop in it's performance. Luckily enough i recently got the new nexus 7

[Q] Please help, my Note has boot-up problems

Please help me out. I know I shouldn't have done it alone but it was tempting.
I already rooted my phone (Samsung Galaxy Note GT-N7000), and I was trying to install the PhilZ Recovery.
It said on my recovery menu that it was successful, and as I try to reboot my phone it does not show up the Samsung logo like it usually does. After the "Galaxy Note GT-N7000" screen" all it does is enter a black screen. I tried wiping all user data, cache, and Dalvik cache with the PhilZ recovery, but to no avail.
EDIT: It's on ICS 4.0.3
What can I do to restore it back to normal? I didn't flash any custom ROMs or anything, just the recovery. I just got my phone, and I don't want to have to wait to spend for another one. Please help, thanks.

3415 9985694
BTICETeKS said:
Please help me out. I know I shouldn't have done it alone but it was tempting.
Click to expand...
Click to collapse
If it's a new phone you shouldn't have too much data on it, so what I would do is just install a custom ROM (There are lot's of them out there for the N7000). Sounds like you can still boot into PhilZ and already wiped the device, so just copy the ROM and necessary files to the phone's SD and install away
You should charge your battery to at least 80% before fiddling with things like that I believe

BTICETeKS said:
Please help me out. I know I shouldn't have done it alone but it was tempting.
I already rooted my phone (Samsung Galaxy Note GT-N7000), and I was trying to install the PhilZ Recovery.
It said on my recovery menu that it was successful, and as I try to reboot my phone it does not show up the Samsung logo like it usually does. After the "Galaxy Note GT-N7000" screen" all it does is enter a black screen. I tried wiping all user data, cache, and Dalvik cache with the PhilZ recovery, but to no avail.
EDIT: It's on ICS 4.0.3
What can I do to restore it back to normal? I didn't flash any custom ROMs or anything, just the recovery. I just got my phone, and I don't want to have to wait to spend for another one. Please help, thanks.
Click to expand...
Click to collapse
You should mention the name of the file you flashed.....

nokiamodeln91 said:
You should mention the name of the file you flashed.....
Click to expand...
Click to collapse
I flashed PhilZ-cwm6-XXLS7-XJB-3.1.zip.

You flashed a JB kernel? Flash an ICS philz kernel to get it to boot up. Or install the rom again using Odin.

nokiamodeln91 said:
You flashed a JB kernel? Flash an ICS philz kernel to get it to boot up. Or install the rom again using Odin.
Click to expand...
Click to collapse
It was? Oh my God I should've looked it up...so that's why.
Where can I find the kernel that's fit for mine?
Sorry for my carelessness.

BTICETeKS said:
It was? Oh my God I should've looked it up...so that's why.
Where can I find the kernel that's fit for mine?
Sorry for my carelessness.
Click to expand...
Click to collapse
Look for it from Philz kernel thread in Original Android Dev section.
Sent from my GT-N7000 using Tapatalk 2

forest1971 said:
Look for it from Philz kernel thread in Original Android Dev section.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
But how do I know which is for my phone?
I don't understand how can I pick the kernel.

BTICETeKS said:
But how do I know which is for my phone?
I don't understand how can I pick the kernel.
Click to expand...
Click to collapse
In Philz main thread there is a topic "Update to all ICS 4.0.4 kernels from 3.71 ---> 3.99:"... these are 4.0.4 Kernels.. Try one of these and check if the phone boots up..
OR
As you have already done wipe data, you may also install a new custom rom like Aryamod...

You wrote that you just got the Note.
So why do you want to stay on ICS and try to install things you obviously do not understand - and risking your device?
Select an JB or KK Custom Rom, follow the specific installation instructions and be happy with your new-born device.
---------- Post added at 12:54 PM ---------- Previous post was at 12:52 PM ----------
nokiamodeln91 said:
...OR
As you have already done wipe data, you may also install a new custom rom like Aryamod...
Click to expand...
Click to collapse
Maybe two posts with the same intention will convince him...

ThaiDai said:
Maybe two posts with the same intention will convince him...
Click to expand...
Click to collapse
You know the drill....

nokiamodeln91 said:
You know the drill....
Click to expand...
Click to collapse
Hmm...
I do want to install CyanogenMod...
Will the latest stable release be compatible with PhilZ?

BTICETeKS said:
Hmm...
I do want to install CyanogenMod...
Will the latest stable release be compatible with PhilZ?
Click to expand...
Click to collapse
Go read the instruction from the rom thread that you want! better stay stock if you don't read or don't understand.
Sent from my GT-N7000 using Tapatalk 2

forest1971 said:
Go read the instruction from the rom thread that you want! better stay stock if you don't read or don't understand.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thanks. I'll have a look at it.

So I downloaded the stable version of CyanogenMod: "cm-10.1.3-n7000.zip"
Is it compatible with the recovery I have?

BTICETeKS said:
So I downloaded the stable version of CyanogenMod: "cm-10.1.3-n7000.zip"
Is it compatible with the recovery I have?
Click to expand...
Click to collapse
start reading and understanding the instructions yourself.
spoon-feeding a lazy baby. for my part I quit here.

ThaiDai said:
start reading and understanding the instructions yourself.
spoon-feeding a lazy baby. for my part I quit here.
Click to expand...
Click to collapse
Yeah, well, sorry.