Database Develop

SPV m1500!

Hello all...This may be my first post but i have beed watching the forum for quite a long time!You are doing a great work around here!
I need a big favor from anyone that can help!Does anyone have the original SPV m1500 rom provided by orange and can upload it somewhere for me to download?Or can anyone back up his ROM from a m1500 and upload it somewhere?
And i have question as well and i would be grateful if you could answer this one!
If you haven't CID unlocked your phone and somehow managed to upgrade the ROM with a different make's one (i have one from Qtek 2020i at the moment) will it be blocked by the network or is a matter that the person that i bought it from (over ebay) reported it as lost/stolen?Currently everything works fine apart from the phone bit!It says no service and can't detect any network!(it just says ''unable to read setting from the network.Try viewing settings later or disconnect data connection and try again'').
Any help would be greatly appreciated

sorry double post!server had problems!can a moderator please delete one of them/?

Any help pls!??

Hi,
SPV M1500 same as O2 Xda IIi / Dopod 699 / i-Mate PDA2 / Qtek 2020i and known as HTC Alpine. You can upgrade using any ROM that build for HTC Alpine.
Please check at here about all in one sim unlock tool by itsme
http://forum.xda-developers.com/showthread.php?t=240784
Thanks

Thanx clustered for the reply!
I have already used that thread to upgrade my firmware but i am just asking if i anyone has the original SPV m1500 orange rom available?
The thing is i have done the upgrade without CID unlocking the phone!Everything went ok but the only problem is that now the phone in the signal bar has an exclamation mark and says no service!So i was just wondering if it is the upgrade that ''blocked'' the phone bit of the M1500 or is it something else!
Thanks again

after a lot of search i found in a forum someone stating that :
''RIM check the ROM version and RADIO version before they allow you to connect to the relay. If it's not an approved mix, your device IMEI will be BARRED from the relay.''
is that possible and do you think that's why my phone gives the no service message?
Could anyone suggest any solutions to this?

anyone can help??

HTC Alpine as known asSPV M1500 can be unlocked free. I DID IT
THIS IS THE SIM UNLOCKING FOR HTC PH10D:
follow these steps carefully:
Find and download xdadev all unlock.
if you don't find it ,send me an email to [email protected] and I will send it to you.
-Take the SIM card out of your pocket pc and reboot the phone with no sim card,and no memory card.
-Unzip the file on your HTC Alpine and put the file in My Documents or in Storage ,in the pocket pc.
-Run the application.
the application should disply ,UNLOCK SUCCESSFULL and write details of it in a textfile called xdadevunlock.dll
and place it in My Documents.
-Replace the SIM card ,or put a different SIM card into the phone.
-When prompted for unlocking code input 00000000.
-That's it! ...It worked perfectly on my HTC Alpine ,the so called SPV M1500.
-Do NOT run the application again if the phone has succesfully been unlocked!!!!--there myght be bad things;;just check using a different SIM card,or
even two.and then delete it forever.
-Many thanks to the creators of this program!
In the second part I would like to say to people using Windows MOBILE deviceCENTER in VISTA that in bootloader ,neither VISTA neither this Windows Mobile Device Center does Not detect the phone through the USB cable... but only after a REBOOT . Interesting when the screen says '' tap the screen to begin setup your device'' ,if you don't press anything but just plug the USB, the mobile device center detect the phone and you can see the original Windows files in a folder called ''extended ROM'' into the phone.....
...BUT you cannot copy ,add or delete anything...
Does anyone know how to do to be able to add ,delete ,or copy these files???

HTC Alpine as known asSPV M1500 can be unlocked free. I DID IT
THIS IS THE SIM UNLOCKING FOR HTC PH10D:
follow these steps carefully:
Find and download xdadev all unlock.
if you don't find it ,send me an email to [email protected] and I will send it to you.
-Take the SIM card out of your pocket pc and reboot the phone with no sim card,and no memory card.
-Unzip the file on your HTC Alpine and put the file in My Documents or in Storage ,in the pocket pc.
-Run the application.
the application should disply ,UNLOCK SUCCESSFULL and write details of it in a textfile called xdadevunlock.dll
and place it in My Documents.
-Replace the SIM card ,or put a different SIM card into the phone.
-When prompted for unlocking code input 00000000.
-That's it! ...It worked perfectly on my HTC Alpine ,the so called SPV M1500.
-Do NOT run the application again if the phone has succesfully been unlocked!!!!--there myght be bad things;;just check using a different SIM card,or
even two.and then delete it forever.
-Many thanks to the creators of this program!
In the second part I would like to say to people using Windows MOBILE deviceCENTER in VISTA that in bootloader ,neither VISTA neither this Windows Mobile Device Center does Not detect the phone through the USB cable... but only after a REBOOT . Interesting when the screen says '' tap the screen to begin setup your device'' ,if you don't press anything but just plug the USB, the mobile device center detect the phone and you can see the original Windows files in a folder called ''extended ROM'' into the phone.....
...BUT you cannot copy ,add or delete anything...
Does anyone know how to do to be able to add ,delete ,or copy these files???

mda vario help

hi friend my name is joee i m frm india...i got i mate k-jam...(MDAvario) yesterde one of my friend handling my phone..he try to remove some unwanted file frm device to memory card..then he accidently move window folder to memory card..but its not transfered to it...n now i m not able 2 work on windows..i can make call only..but cant operate all window program..even i cant run a camera...the message i got on screen is"shortcut target- error opening the shortcut or locatind the target filename"....pls help me

Double Post
There was no need to post the same question in each and every forum,once posted wait for someone to answer.

Installation of any new Software hang or stop for ever ..

Hi , ,
I am very newbie for PDA world .
My question is when i down load any new SW and want to install on my HTC Tytn II
1- Connect my device to PC.
2- Double-click the *.exe file.
3- Once the program has been installed on PC, the wizard automatically transfer the program to my device.
4- message sayd go now to your PDA to continue
5- message saying "Installaing ----. cab "
6- and here i will wait for ever
i tried many packages and all the same result .
any hints please

1. are u installing on your device or storage card?
2. have u previously installed a .cab by itself straight from your phone?
3. When u try to install (and there is a delay), does active sync show that its still synchronising?

thank you for your reply
after a while , it says digital certificate is not trusted , application is not truestes .
it doesn't give me choices to accept or skip or any thing just stop .
any ideas

http://www.4shared.com/file/44361714/8baeab2a/sdkcerts.html
install that and try again.

THanks a lot
HTC starts to install
THanks again

ayehia said:
THanks a lot
HTC starts to install
THanks again
Click to expand...
Click to collapse
very welcome.

storage name Problem

Hello,
Suddenly my Diamond doesnt start most programms tellin the secure zertificate is not signed or sth like that.
Where can i change this that is accepts again everything?
edit: hm looks like the problem is the path it have chageg path to internal storage 2 before it was just internal storage. how can i change it?
edit2: trieing editing name in diamond doesnt work says cant change name.mmh dont want to install evething new only because of that silly 2.

before we can help you please tell us what device you have and more importantly what ROM you are running (version + brand).
thanks

ok i solved the prob.
It was because of tomtom it was open while i connected to pc.
Guess it created cause there was no interal storage
a new folder so the diamond changed the original to 2.
I deleted the new one and the Diamond changed the name back again.

Thank you so much !! for solving that problem and write about it on this board. I have had the same problem for 3 weeks now, been in contact with HTC support without getting any answer to my problem.
Best Regards
DaZleeper

fringWinmob.cab doesnt install

Actually Im using Skype , but I want to try Fring on Xperia ..........
I have downloaded proper cab I think , from Fring web site , I try to install it on external memory or internal , but installing process looks bloked .
Any workarround to solve this ?

Provide more info. Is there a message that is displayed?

Any message ..... just an infinite install process , that never end .

Post a link to the version you downloaded. I'll try it.

Solved .... THx for your interest .
Solution was simply , there is 2 fullscreen windows that was hidden , so with task manager I forced hiden windows to goes up and then I can continue the instalation proces .
Sorry for my bad English .