PLZ help
my milestone wont Boot up. the back light just turns on for about 5 seconds and then when the M logo should appear it just turns off for another 5 seconds and then turns on back it self and continues the cycle
and i cant seem to flash it with RSD lite it go trough the first half of the process but it just start turning it self off right before the M logo when RSD lite reboots it
perromatic said:
PLZ help
my milestone wont Boot up. the back light just turns on for about 5 seconds and then when the M logo should appear it just turns off for another 5 seconds and then turns on back it self and continues the cycle
and i cant seem to flash it with RSD lite it go trough the first half of the process but it just start turning it self off right before the M logo when RSD lite reboots it
Click to expand...
Click to collapse
It seems that something goes wrong with your current ROM... Try to come to bootloader and flash to stock ROM, and then, upgrading to your favourite cumstom ROM again. I suggest CM10 cause it works quite well now!
perromatic said:
PLZ help
my milestone wont Boot up. the back light just turns on for about 5 seconds and then when the M logo should appear it just turns off for another 5 seconds and then turns on back it self and continues the cycle
and i cant seem to flash it with RSD lite it go trough the first half of the process but it just start turning it self off right before the M logo when RSD lite reboots it
Click to expand...
Click to collapse
I believe your problem is more serious than corrupted rom.
I guess your only chance is:
-booting into Bootloader Mode (hold the DPad-Up while turning on)
-if you see a black and white screen named "Bootloader" connect your phone to a PC
-i assume you have the proper driver installed (if not, you can download it from HERE)
-start RSDLite, it should show you in the list something like this "S Flash OMAP3430" and the status is "Connected"
-now you must find the proper SBF file for your phone HERE
-flash the SBF
-if succeed then reboot
-hope!
Related
was going to flash leo 8.2, was going to run task 29 first, but in error instead of running enter boot loader i run rom update utility and now when i switch on it just gets on to the black cell seris screen and will not move any ideas how i can get it unstuck
thanks
been trying every thing, as its stuck on the black cell screen the phone will not switch off, or show up on the pc to reflash
hope its not brick
really need the phone tonight also so any quick help would be great
press the volume down button and soft reset at the same time you will see a tri colored screen, you can plug in your phone and flash from there.
thread closed, not rom development
Hi,
I just flashed Darky's rom 10.2 and now when I boot my phone I can see the GALAXY logo and the "powered by DarkCore.." but it stays like this for several seconds and then just become black and then the logo reappear all over...
the phone it self wont boot.
I cant enter recovery or download mode either.. if I keep pressing (the volume buttons) a battery (?!) icon is shown, if i release - The logo come back.
WHAT CAN I DO?
Don`t panic. This sounds like a pretty simple boot loop.
To get into download mode, plug your phone into the wall charger and use the three button combo. Flash back to stock and start all over.
remove the battery for few second. put it back and use three button combination to enter into download mode and try to flash RE. Make sure repartition is ticked. Check my signature for the guide...
But...
I had my lag fix turn on..
now i cant get to the settingh (cause the phone wont boot...)
It wont damage my phone to flash?
And by flash you mean with Odin and all the the basic GB?
Shouldnt i get to recovery mode and just flash the Darky 10.2 all over (with wipe and all..)
???
Yesterday I attempted to flash back to stock with ODIN, but after the program said the operation was successfully completed I was left with a problem.
Now, whenever I attempt to turn on the device it hangs at the AT&T logo for about 10 seconds, the screen goes black, and this repeats indefinitely. And whenever I plug the device into any outlet there is the loading screen before it shows how much battery you have, but before it shows the green bar in the battery the screen goes black, and also repeats indefinitely.
I've tried all of the button combinations but cannot seem to get into download mode or even recovery mode.
There was one time where the device booted up, after about an hour of the AT&T logo flashing, but right after the phone booted up it shut down because it died.
Is there anyway I can get into download mode from this state?
You have a late build phone, you flashed Odin one click to 2.1, later builds phones just bootloop with 2.1, and those bootloaders trend to break the button combos.
You'll need a jig to force download mode.
there is a sticky at the top of the dev section with stock packages, I'd suggest grabbing a gingerbread packages with bootloaders, so your phone will boot up AND it'll fix your button combos.
If anyone wants to know, I was able to fix it quite easily, it just took a lot of patience and without a jig.
I first charged the phone for about 4 hours.
Then I turned the device on and let the AT&T logo flash until eventually the device turned on.
Since I was on 2.1 I was able to use the oneclick root application to root my phone. Amazingly it actually went into recovery and I was able to apply the update.zip.
Next I rebooted the phone and waited until it finally turned on again, from here I downloaded a command line application and was able to use that to force the device into download mode.
Finally, I used Heimdall oneclick and my phone was back to normal.
I have a Motorola milestone (second hand) and tried to load a update for it then i noticed the following problems:
- boot looping at the android logo
-when i tried going into bootloader i get a blank black screen
-when i go into recovery and try to update using "update.zip" i get a EOCD error and another time i get a authorization error
WHAT TO DO????
Come on dude,
Just search EOCD error, I think you will find at least 15 topics.
You lost root, Nedd to flash vulnerable recovery sbf. You will find latest instructions on nadalbak site.
You can find site inside his cm7 topic. Milestone android development.
Sent from my Milestone using xda premium
i'm fairly new to the milestone side, the version that is on the phone is 2.2
Everybody's instruction is to put the phone in bootloader mode and connect to the pc but i only get a black screen and then the phone restarts hence rsd lite not picking it up
Put it in recovery and try to flash another sbf, it should work.
Trough rsd lite.
try that just now and still no response on the pc, and i know the usb port is working because i charged the phone
Are you sure your drivers for phone are correctly installed?
Explain correctly installed?
yeah so what about when i try going into boot loader and get a blank screen?
In the early development of moto driver's phone wasn't recognised by rsd lite.
I didn't hear of that problem anymore though. The solution was to reinstall / install drivers again or try on another pc.
Cable could also be a problem.
Are you trying to enter bootloader with the cable connected to phone? If yes try without and after connect it.
The cable isnt the problem, im sure of that and i tried on two other laptops but they are 64 bit windows 7 but anyways why when i press "power+vol up + camera" i only get a black screen and not black screen with other milestones?
I'm thinking thats the problem or reason why rsd lite not picking up the phone cuz its not in bootloader mode
Ahhh
It took some time since last used bootloader.
But I think is power + x for bootloader.
==== update ====
my bad that's for recovery
oky just tested:
it's power + up key from keyboard
now when i first pressed the power i got a black screen, so i pressed the power again while holding the up key .. and voila:
bootloader 90.78
battery ok
....
good luck ..
when this happened to me i was shocked so much , but then i got it fixed so yay
sigh was trying that from lastnight but no luck
Does anybody have a video to how this done because i'm wondering if i'm doing it right cuz i'm still getting black screen when trying to go into bootloader, i pressed "power + up button on DPAD" and then pressed the power button again but still black screen
While the phone is off, hold the up button on the D-pad and press the power button. Do not let go of the up button until the bootloader screen comes up.
while the phone is off? i can't turn off the phone because its just looping so i take out the battery then put it in and press up and power button so is that the right way?
Yes,
If it doesn't work, for pre 90.78 bootloader I think it was another combination of keys.
Google it
Got it all wrong, the problem was that a app was installed and then the phone was restarted then the looping start at the android sign
no luck, the ways i see is the same as urs
reesieBennett said:
Got it all wrong, the problem was that a app was installed and then the phone was restarted then the looping start at the android sign
no luck, the ways i see is the same as urs
Click to expand...
Click to collapse
about the video:
found this on youtube:
bootloader:
http://www.youtube.com/watch?v=xjQcvg3Eplc
recovery:
http://www.youtube.com/watch?v=H3Vl9NbU6Ag&feature=related
if you enter recovery try wiping everything / factory reset and see if it get into android.
other than this i haven't got any other idea,
it is possible to reboot it with adb if you got a rom that supports adb at boot. ex CM7. cm6 and froyo rom not sure but this is a long shot.
I tried flashing the latest firmware with Oden and it failed, when I disconnected the phone and tried to put it back into download mode it comes up with 2 lines of small text in top left of screen then screen goes blank for a few seconeds then comes up with a list of stuff in blue red and green text with a little android in the middle of the screen with Kernal Panic
Upload Mode to the right of the andriod.
I can not turn the note 9 off, or figure out how to get back into recovery mode or download mode now. and the battery was nearly full when this happened , when the screen goes blank again after a few minutes the led flashes, if I press any of the volume keys or the power button the screen comes back on for a few minutes and while the screen is displaying the message the LED doesnt blink, then two minutes or so the screen times out and LED blinks again.
if I hold the btton down to try and go into recovery mode it reboots after about 10 seconds, shows the normal Samsung boot screen then displays the 2 lines of text at the same time which are in pink, then goes to the error screen I mention above
PLEASE HELP
Is going to take forever for this battery to drain and the unit shut off so I can try to boot into recovery or download mode...
HUGE thanks in advance
Hi! I got this problem too!
I was following guideline in this thread https://forum.xda-developers.com/galaxy-note-9/how-to/guide-change-note-9-csc-easy-guide-t3879473
I was following the procedure, but in very last step while flashing new firmware something happened to ODIN, it failed to flash it. I tried to restart the phone, but it entered KERNEL PANIC UPLOAD MODE. I was trying to get of this, but I was only able to enter recovery mode which didn't work properly either. It was indefinitely looping between installing update screen and other screen with error messages.
If I try to Volume down power for some time, I get POWER RESET OR UNKNOWN UPLOAD MODE.
So, no way out to get into download mode again.
Hi ckhaustralia, did you end up getting some help or an answer about the kernel panic mode issue with uour Note 9 problem you listed above? I have the same exact issue, except the reason why the firmware flash failed in my scenario was due to the charging port which I believe had a faulty sensor because I got a message half way through the flash indicating there "moisture" in the port. Now no matter what I have tried, I cannot boot into download mode to try and fix it. I think the only possible way would be to use something like a ZX3 box but it would be great to hear from someone knowledgeable within XDA?