Database Develop

GT-P1000T

Hi all..
I just recently bought an unlocked Telstra galaxy tab..
Well..yes i am a noob..
That's why i'm asking..!!
What is this supposed to means?
PDA : P1000TDVJJ3
PHONE : P1000TDVJJ3
CSC : P1000TDVTTELJJ4
What is the connecrion of those above with the ROM's or Kernel? (i see alot of post that mentioned jj*,xx, etc..
Hope someone would be realy kind to help..
Thx in advance
Sent from my GT-P1000T using XDA Premium App

PDA : P1000TDVJJ3
PHONE : P1000TDVJJ3
CSC : P1000TDVTTELJJ4
Hello,
Since we are in australia and using P1000T, that is the firmware. Your firmware is JJ3.
Now, from here you can:
Stay stock (leave it at that)
Get custom Rom (overcome, etc)
If you want custom rom, look in the galaxy tab android development and follow the instructions to the letter to avoid bricking your tab.
It is normally advisable to flash your rom to roto's rom first before you get a custom rom. Roto's rom: roto jmi or roto jme, just search the development section.

I flashed 2 P1000t's straight to gingerbread with no problems... The bootloader doesn't need to be patched. Follow the instructions in the overcome thread - http://forum.xda-developers.com/attachment.php?attachmentid=596770&d=1305467639 or these instructions & Links on this thread - http://forum.xda-developers.com/showthread.php?p=13781955
Just remember, You don't need to flash the modem.bin part, just untick phone in ODIN. This allows you to keep the original Telstra radio...
Cheers, and happy flashing...

Ok bloke so two questions if you can please help. What is the best way to backup the existing stock to restore back to in case i screw it. Also when you say you went straight to gingerbread, which gingerbread rom did you use that was successful.
Did you use/have you heard of the Euro Italian one that is floating around the traps?

OK, here's stock Telstra firmware and radio - http://forum.xda-developers.com/showthread.php?t=971870
Read about this on Sarsippius thread... Big thankyou, Sarsippius, for this...
You MUST have AT LEAST 50% battery or you may end up with a brick. The tab doesn't charge during the flashing process so if you have low battery it will be sucked dryt pretty quick. Flashing seems to use a bit of power...
Next, I flashed this - http://forum.xda-developers.com/showthread.php?t=1073854 , thankyou Chainfire...
You need to follow the steps EXACTLY (if you want pictures go to the overcome thread and get his flashing manual, though there a re a few files named different and he doesn't need to flash the dbdata.tar file after the 1st flash...I also flashed the CF-Root V3.2 afterwards using ODIN....
Flashed 3 times using ODIN. Now have stock gingerbread and CWM on tab...
You can use the modem.bin file from the stock rom to keep the Telstra modem...
Takes about 10 - 15 minutes , go slow, read each step and DON'T skip ahead or you will come a cropper...
Remember, you can ALWAYS flash back to stock through ODIN as long as it recognises your tab....
I then flashed the Overcome rom V2.0.0 RC1 using CWM...
Happy Flashing....

ok..
i just manage to root GT-P1000T with chainfire thingy..(can't remember the name)
i fire up root explorer..and also installed bootloader patch - as per suggestion i found in xda (it says that mine are safe)
does it realy means that i realy could flash my dev with any firmware??
Sent from my GT-P1000T using XDA Premium App

You have the same Tab as I do, yes you can flash any gsm or european rom... DON'T flash the cdma roms as they are different from my understanding, could be wrong...
Look at my post above if you want to flash to gingerbread... I know that works...
Cheers...

ultramag69 said:
You have the same Tab as I do, yes you can flash any gsm or european rom... DON'T flash the cdma roms as they are different from my understanding, could be wrong...
Look at my post above if you want to flash to gingerbread... I know that works...
Cheers...
Click to expand...
Click to collapse
thanx for your help mate..
very helpfull indeed..
Sent from my GT-P1000T using XDA Premium App

[q] upgrading baseband firmware on cm7.2

I am on CM7.2 copper kang +ICS bld final by jusada+ allinone script ...
Baseband 2.3.4 DDKQ6[India]... using CW 5
i want to upgrade my baseband to 2.3.6 .....
How can i achieve it safely .....
do plz answer these tooo.....
1. can i flash new firmware simple as changing roms like in odin ...
2. is there a need to unroot... if so how shall i proceed ( i do know about basic firmware flashing without root...),, i mean how shall i unfold my changes to original..
3. do i need to remove clockwork mod 5??? and if so plz state the way... i dont find any safe method till now for my search...
4. MOST IMPORTANT how much will be the effect of upgrading my baseband version on the performance of my ace

ambujpriyadarshi1991 said:
I am on CM7.2 copper kang +ICS bld final by jusada+ allinone script ...
Baseband 2.3.4 DDKQ6[India]... using CW 5
i want to upgrade my baseband to 2.3.6 .....
How can i achieve it safely .....
do plz answer these tooo.....
1. can i flash new firmware simple as changing roms like in odin ...
2. is there a need to unroot... if so how shall i proceed ( i do know about basic firmware flashing without root...),, i mean how shall i unfold my changes to original..
3. do i need to remove clockwork mod 5??? and if so plz state the way... i dont find any safe method till now for my search...
4. MOST IMPORTANT how much will be the effect of upgrading my baseband version on the performance of my ace
Click to expand...
Click to collapse
1.didnt undarstand
2.there is no need to unroot to flash a fw from odin.
3.there is no need to remove cwm5.
4.not that much.in every fw there are new bug fixes or it mainly effect stability.it
has a very litle effect on performance.

xdaboy122 said:
1.didnt undarstand
2.there is no need to unroot to flash a fw from odin.
3.there is no need to remove cwm5.
4.not that much.in every fw there are new bug fixes or it mainly effect stability.it
has a very litle effect on performance.
Click to expand...
Click to collapse
so can i simply use odin --attach my phone via usb -- flash --- and then again flash cm7.2--ics cunday ????

ambujpriyadarshi1991 said:
so can i simply use odin --attach my phone via usb -- flash --- and then again flash cm7.2--ics cunday ????
Click to expand...
Click to collapse
yeah first download firmware from here u need to register on this site.and there is guide to use odin on this site read it carefully first-
http://www.sammobile.com/firmware/

xdaboy122 said:
yeah first download firmware from here u need to register on this site.and there is guide to use odin on this site read it carefully first-
http://www.sammobile.com/firmware/
Click to expand...
Click to collapse
ALso one thing i would like to you before i flash...
SOMEONE SAID CW5 is for CYANOGENMOD only.....
plus 2 days earlier---- i factory reset from CM5 after installing CM5 ON MY GALAXY ACE.. IT WENT INTO BOOTLOOP... THE bootanimation never ended .. then i flashed cm7.2 AND it was all well...
plz clear my doubt --- will there be again such problem on installing new 2.3.6????
also plz tell india mein 2.3.5 better or 2.36??

ambujpriyadarshi1991 said:
ALso one thing i would like to you before i flash...
SOMEONE SAID CW5 is for CYANOGENMOD only.....
plus 2 days earlier---- i factory reset from CM5 after installing CM5 ON MY GALAXY ACE.. IT WENT INTO BOOTLOOP... THE bootanimation never ended .. then i flashed cm7.2 AND it was all well...
plz clear my doubt --- will there be again such problem on installing new 2.3.6????
also plz tell india mein 2.3.5 better or 2.36??
Click to expand...
Click to collapse
I don't know that much about cwm5 but see when u flash new firmware cwm5 will be removed and there will be new normal stock recovery.before flashing just wipe factory reset and
Data and also cache partion to be on safe side.have a happy flashing
Sent from my GT-S5830 using xda premium

I don't know that much about cwm5 but see when u flash new firmware cwm5 will be removed and there will be new normal stock recovery.before flashing just wipe factory reset and
Data and also cache partion to be on safe side.have a happy flashing
One more thing I never factory reset my phone.so don't know much if problem resist.account to me all baseband are same so ask someone else.....
I hope I helped you
Sent from my GT-S5830 using xda premium
Sent from my GT-S5830 using xda premium

ambujpriyadarshi1991 said:
ALso one thing i would like to you before i flash...
SOMEONE SAID CW5 is for CYANOGENMOD only.....
plus 2 days earlier---- i factory reset from CM5 after installing CM5 ON MY GALAXY ACE.. IT WENT INTO BOOTLOOP... THE bootanimation never ended .. then i flashed cm7.2 AND it was all well...
plz clear my doubt --- will there be again such problem on installing new 2.3.6????
also plz tell india mein 2.3.5 better or 2.36??
Click to expand...
Click to collapse
Theres nothing like CWM5 only working with cm7,its utter foolishness :/ Who told you that?
You might have messed up something,somewhere,its common
If you do everything in the instructions box,no..If you dont,well....
India mein kya hei,2.3.5,2.3.6 ko aloo banayega?lol...i was jk.It works the same all around the world.Its not the version but the baseband that makes the difference...I suggest KPH.There are a lot of other basebands though
---------- Post added at 09:21 PM ---------- Previous post was at 09:17 PM ----------
ambujpriyadarshi1991 said:
I am on CM7.2 copper kang +ICS bld final by jusada+ allinone script ...
Baseband 2.3.4 DDKQ6[India]... using CW 5
i want to upgrade my baseband to 2.3.6 .....
How can i achieve it safely .....
do plz answer these tooo.....
1. can i flash new firmware simple as changing roms like in odin ...
2. is there a need to unroot... if so how shall i proceed ( i do know about basic firmware flashing without root...),, i mean how shall i unfold my changes to original..
3. do i need to remove clockwork mod 5??? and if so plz state the way... i dont find any safe method till now for my search...
4. MOST IMPORTANT how much will be the effect of upgrading my baseband version on the performance of my ace
Click to expand...
Click to collapse
My version
1)Yep,but you just need to be a bit careful and assign the files to their respective sections.
2)No,no need to unroot,Recovery isnt an apk file to get su access ...I dont know why but i have seen many people are asking this same question around :/ Do i need to unroot before flashing this and that...
3)No,the firmware will remove it for you..When you flash another firmware,it will replace your custom recovery with the original android recovery
4)Not much,as far as i know,its just minor bug fixes

Prawesome said:
Theres nothing like CWM5 only working with cm7,its utter foolishness :/ Who told you that?
You might have messed up something,somewhere,its common
If you do everything in the instructions box,no..If you dont,well....
India mein kya hei,2.3.5,2.3.6 ko aloo banayega?lol...i was jk.It works the same all around the world.Its not the version but the baseband that makes the difference...I suggest KPH.There are a lot of other basebands though
---------- Post added at 09:21 PM ---------- Previous post was at 09:17 PM ----------
My version
1)Yep,but you just need to be a bit careful and assign the files to their respective sections.
2)No,no need to unroot,Recovery isnt an apk file to get su access ...I dont know why but i have seen many people are asking this same question around :/ Do i need to unroot before flashing this and that...
3)No,the firmware will remove it for you..When you flash another firmware,it will replace your custom recovery with the original android recovery
4)Not much,as far as i know,its just minor bug fixes
Click to expand...
Click to collapse
na aloo ni bannaunga... read on interbnet while exploring that one should unroot before eflashing stock rom... also there is no harm asking rather than doing harm without asking

I told that i was jk.... -_-
Where did you read it from,can you give me the link?If i get it,I am gonna kick that guy's a**.....Spreading completely wrong information

Prawesome said:
I told that i was jk.... -_-
Where did you read it from,can you give me the link?If i get it,I am gonna kick that guy's a**.....Spreading completely wrong information
Click to expand...
Click to collapse
Our answers are same did you copied mine lol....hey pp what is going with alooo lolzzz
Sent from my GT-S5830 using xda premium

xdaboy122 said:
Our answers are same did you copied mine lol....hey pp what is going with alooo lolzzz
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
-_- I didnt copy your answer HP ( )..I gave him my version

How important is to upgrade baseband when flashing a custom CM7 rom?
I mean, my baseband is the one that came with my carrier and is:
GT-S5830L Argentina (Personal) 2011 September Android 2.3.3 S5830LUBKPF
Do I need to upgrade to any of this roms before flashing a custom CM7 rom?
Hungary (T-mobile) 2012 June 2.3.6 S5830XWKT7
Spain 2012 April 2.3.6 S5830XWKTM
Russia 2012 March 2.3.6 S5830XXKPT
India 2012 February 2.3.6 S5830DDKQ8
Thanks in advance.

So do you want to flash back cm7 after changing baseband?
Sent from my GT-S5830 using Tapatalk 2

galaxyace152 said:
So do you want to flash back cm7 after changing baseband?
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
Yes. Does it makes any sense what I am asking? I mean, when using cm7 it does not matter if I im using a 2.3.3 or a 2.3.6 baseband?

How Do You Move From German ROM to UK ROM?

The UK ROM XEULP4 has just been released and I would like to replace the German ROM XXLPY which I flashed on my UK Note. Can anyone describe a safe way to do that?
Many Thanks
PS I meant to post this in the Q&A Sub-Section. Can it be moved. Sorry

download the rom with checkfus etc and simply flash with pc odin its a non wipe rom and i even kept root

anubis1126 said:
download the rom with checkfus etc and simply flash with pc odin its a non wipe rom and i even kept root
Click to expand...
Click to collapse
Thanks for your reply. I was unsure if you needed to go back to GB first.

Btw another way, the one i used, is using Mobile Odin, that did the trick for me
Sent from my GT-N7000 using xda premium

How to Revert back to Galaxy S original firmware???

Hey guys, i installed Brightside Evolution Firmware a few days back, but it isn,t working well and wanted to revert back to the Original stock ROM of GalaxyS GTI9000. DDJ froyo, Which is the safest to get back my original firmware??????????
thanx in advance!!!!

I think you just have to flash the old firmware with odin. Just search for a tutorial for the firmware you want. Maybe i misunderstood you.

kuchen123 said:
I think you just have to flash the old firmware with odin. Just search for a tutorial for the firmware you want. Maybe i misunderstood you.
Click to expand...
Click to collapse
I am having problems with flashing the firmware with Odin. I almost bricked my phone the last time and i don't want to brick my phone again, so can you point me in the correct direction, buddy????

dont panic..just go and flash any of 2.3.6 official rom. go for xxjvk. search this forum for official roms and you can even find video on youtube for correct flashing.
hope this helps
Sent from my GT-I9000 using xda app-developers app

Hey
Goto sammobile.com
Signup there and download the firmware available in ur county...
Also download flash programs and flash guide...its preety simple..
Hopes this helped..
Cheers
Sent from my GT-I9000 using xda app-developers app

Odin is not that dangerous :silly: You just have to look that you put the files on the right place and then just dont touch the phone while flashing. Then it is quite safe Just search for a tutorial.

Visit - Samsung Galaxy S GT-I9000 - Flashing to Original ROM : https://www.fixmystuff.in/FMS_Forum/threads/samsung-galaxy-s-gt-i9000-flashing-to-original-rom.46/

You can try to flash TeamwinRecovery/CWM with stock recovery than you just copy the stockrom to your sd card an flash it with the TWR/CWM... Afterwards you just flash the stock recovery again with TWR/CWM and you've finished without odin I hope it really works for sgs, cause i've tested that only with sgs plus

Stock Firmware thread
Here you go buddy, head over to this thread, they have a large list of stock ROMs, just choose the one that matches your region and flash it using Odin
Make sure you read the instructions in the OP.
Thread link - http://forum.xda-developers.com/showthread.php?t=1102881

Lord_Santa said:
Here you go buddy, head over to this thread, they have a large list of stock ROMs, just choose the one that matches your region and flash it using Odin
Make sure you read the instructions in the OP.
Thread link - http://forum.xda-developers.com/showthread.php?t=1102881
Click to expand...
Click to collapse
flash froyo

http://www.androidauthority.com/galaxy-s-gt-i9000-gingerbread-xwjw1-firmware-52955/
Follow instructions...
I'm not advertising the website - Just helping another member as it had helped me before

raj.bhakte said:
Hey guys, i installed Brightside Evolution Firmware a few days back, but it isn,t working well and wanted to revert back to the Original stock ROM of GalaxyS GTI9000. DDJ froyo, Which is the safest to get back my original firmware??????????
thanx in advance!!!!
Click to expand...
Click to collapse
All these other people posted links for instructions and stuff to alternate websites.
If you still need help, use the xDa written guide on flashing the stock firmware for your device.
http://forum.xda-developers.com/showthread.php?t=2261573
That link has AT&T provided, search the forums for the carrier/model GS4 you have and download the stock firmware.

update.zip in Cache folder when trying to flash ICS ROM from Stock

Hi there
I recently got a Galaxy S (running Stock Gingerbread.XXJV9) for free off of a family member, so I decided to root it (which I did using CF-Root) and I'm trying to flash RemICS-UX onto the phone from stock 2.3
The thing is whenever I try to flash via ROM Manager, it will tell me there is an update file in the cache folder, when there shouldn't be and I do not know how this file even got into that folder (since this isn't a brand new phone)
Would this impact me flashing a new ROM at all? I have wiped cache at the moment, but before I flash the new ROM I would like to know if I have to repartition for ICS or can I leave it as is and flash without a problem.
Thanks for any help/advice in advance

Hey
The first requirement for flashing a ICS rom is that your phone should have 2.3.6 ValuePack, Rooted...you cannot just flash it on 2.3 stock..
Sent from my GT-I9000 using xda app-developers app

tchindalia said:
Hey
The first requirement for flashing a ICS rom is that your phone should have 2.3.6 ValuePack, Rooted...you cannot just flash it on 2.3 stock..
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Ah ok, there is a link to that ROM in the dev forum for this phone then I assume (just it isn't stickied like in Desire S forum)
EDIT: Found the link, these are really different to Desire S stock flashing, hopefully there is a glossary for what CSC means
Anything else I need to do with that ROM after I've flashed it besides reactivate root if I don't use a pre-rooted one?

Hey
Actually u dont need to do anything.. the roms quite good...plus rooting is ur option and is preferred if u need ics..
Cheers
If my post helped,don't mind hitting the Thanks button..

tchindalia said:
Hey
Actually u dont need to do anything.. the roms quite good...plus rooting is ur option and is preferred if u need ics..
Cheers
If my post helped,don't mind hitting the Thanks button..
Click to expand...
Click to collapse
Ah awesome thank you,
Also I can flash straight to ICS from the CF-Root provided for the value pack without any extra requirements right? As I plan on doing so, because the Value Pack update has basically messed up my settings and everything, so I don't want to stay on it for a while

Hey
You can Flash any ICS rom once your phone is ont 2.3.6 rooted...not need to wait...