Related
i need a kernel that supports both upto 1.5 or 1.6 OC and allows costum boot anim and root to stock rom thx in advance
btw is it worth swiching to CM7 or miui ?
You can try TalonDev
ST3MC said:
i need a kernel that supports both upto 1.5 or 1.6 OC and allows costum boot anim and root to stock rom thx in advance
btw is it worth swiching to CM7 or miui ?
Click to expand...
Click to collapse
If you are using CM7 you can flash the Glitch kernel. But I am warning you, it won't be stable. 1.4 is the usual upper limit, and even then a lot of games won't run properly.
theandroidboy said:
You can try TalonDev
Click to expand...
Click to collapse
but its only 1.2 oc i need 1.4 and above and for the other guy i dont have CM ihave stock rom
Tornado kernel Aureus Neutrino runs stable at 1.5, is rooted and proven.
Hi, i have a samsung galaxy S i9000 and i'm kinda new with it
all i want is to make it faster because it runs very slow , i've seen youtube videos about testing some games on the same phone but some of them won't even open up. i got more interested in upgrading it and started searching around on how to. So here is what i want to do:
I want to upgrade it by changing my Rom in Cyanogen 9 and kernel Devil 3. I don't even know if it is good but i'm sure its better than gingerbread.
Can some1 help me out with it , maybe post a little tutorial how to do it.
Aditional info :
-I don't want so save anything from it
-It's rooted
-Firmware version: 2.3.6
-Kernel version: 2.6.35.7-i9000XXJVU-CL851880 [email protected] #2
TheInfamous. said:
Hi, i have a samsung galaxy S i9000 and i'm kinda new with it
all i want is to make it faster because it runs very slow , i've seen youtube videos about testing some games on the same phone but some of them won't even open up. i got more interested in upgrading it and started searching around on how to. So here is what i want to do:
I want to upgrade it by changing my Rom in Cyanogen 9 and kernel Devil 3. I don't even know if it is good but i'm sure its better than gingerbread.
Can some1 help me out with it , maybe post a little tutorial how to do it.
Aditional info :
-I don't want so save anything from it
-It's rooted
-Firmware version: 2.3.6
-Kernel version: 2.6.35.7-i9000XXJVU-CL851880 [email protected] #2
Click to expand...
Click to collapse
CyanogenMod (CM) 9 is really outdated. If you want a good, fast ROM I can recommend Slimbean. It's largely based on CM. You can find more info here:
http://forum.xda-developers.com/showthread.php?t=2060374
Detailed instructions can be found in that thread and on the slimrom website.
Coming from Gingerbread you'll need to install CM10 first, otherwise you will lose your IMEI, which will render your phone unable to make or place calls. Once on CM10 you can then flash Slimbean.
Or using an newer version of CM
fizzefazze said:
CyanogenMod (CM) 9 is really outdated. If you want a good, fast ROM I can recommend Slimbean. It's largely based on CM. You can find more info here:
http://forum.xda-developers.com/showthread.php?t=2060374
Detailed instructions can be found in that thread and on the slimrom website.
Coming from Gingerbread you'll need to install CM10 first, otherwise you will lose your IMEI, which will render your phone unable to make or place calls. Once on CM10 you can then flash Slimbean.
Click to expand...
Click to collapse
well
fizzefazze said:
CyanogenMod (CM) 9 is really outdated. If you want a good, fast ROM I can recommend Slimbean. It's largely based on CM. You can find more info here:
http://forum.xda-developers.com/showthread.php?t=2060374
Detailed instructions can be found in that thread and on the slimrom website.
Coming from Gingerbread you'll need to install CM10 first, otherwise you will lose your IMEI, which will render your phone unable to make or place calls. Once on CM10 you can then flash Slimbean.
Click to expand...
Click to collapse
is this video good to follow? http://www.youtube.com/watch?v=DizY-TV1QG8
i'm about to follow the whole description in next secs
thank u guys
thanks a lot i just installed cm 10 and it runs smooth as hell .
Perfect when we could help!
So now you can try different Roms or newer versions when you want...
TheInfamous. said:
thanks a lot i just installed cm 10 and it runs smooth as hell .
Click to expand...
Click to collapse
there is something i need to know
freakymod2120 said:
Perfect when we could help!
So now you can try different Roms or newer versions when you want...
Click to expand...
Click to collapse
Like i said in the original post i wanted rom cm9 with devil 3 kernel but still didnt know what that means...( the kernel part)
Now that i got the cm10 ive searched around videos on youtube and seen lot of ppl kinda overclocking it with diferent kernel...
I want to do it like with semaphore or some kernel thing... can someone explain to me how it is done and if it is good for the phone?
Some infos:
Android version: 4.2.2
Baseband vers: I9000xxJVT
Kernel version: 3.0.76-gc0a8d45
Memory: 369 mb
Cm vers: 10.1.2-galaxysmtd
Okay different kernel i have no experience with it ,sorry...
But overclocking is available with the stock-kernel in CM 10 ...to about 1200mhz in the performance menu under your settings ...have you activate developer options and performance...do you know how to do it???
http://wiki.cyanogenmod.org/w/Doc:_developer_options
TheInfamous. said:
Like i said in the original post i wanted rom cm9 with devil 3 kernel but still didnt know what that means...( the kernel part)
Now that i got the cm10 ive searched around videos on youtube and seen lot of ppl kinda overclocking it with diferent kernel...
I want to do it like with semaphore or some kernel thing... can someone explain to me how it is done and if it is good for the phone?
Some infos:
Android version: 4.2.2
Baseband vers: I9000xxJVT
Kernel version: 3.0.76-gc0a8d45
Memory: 369 mb
Cm vers: 10.1.2-galaxysmtd
Click to expand...
Click to collapse
help
freakymod2120 said:
Okay different kernel i have no experience with it ,sorry...
But overclocking is available with the stock-kernel in CM 10 ...to about 1200mhz in the performance menu under your settings ...have you activate developer options and performance...do you know how to do it???
Click to expand...
Click to collapse
i just overclocked it to 1200mhz and zram to 18(default) and now everytime i boot it , it just freez and shuts down.... what can i do now?
TheInfamous. said:
i just overclocked it to 1200mhz and zram to 18(default) and now everytime i boot it , it just freez and shuts down.... what can i do now?
Click to expand...
Click to collapse
Your clock isnt stable go download semaphore kernel or devil kernel and flash it in recovery and try then over clocking with their kernel managers.
Sent from my GT-I9000 using xda app-developers app
well
darkknigh_t said:
Your clock isnt stable go download semaphore kernel or devil kernel and flash it in recovery and try then over clocking with their kernel managers.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
well i just got it back at default no shut downs
some Qs
sorry
TheInfamous. said:
well i just got it back at default no shut downs
Click to expand...
Click to collapse
Thats good so now if you want to speed up your phone and overclock it download semaphore or devil kernel and flash in recovery
Some Qs
darkknigh_t said:
Thats good so now if you want to speed up your phone and overclock it download semaphore or devil kernel and flash in recovery
Click to expand...
Click to collapse
Some Qs:
Do i flash semaphore kernel same way i installed ROM?
Will semaphore replace current ROM (cm10)??
Did some1 had any problems with semaphore kernel ? like bricking the phone? is it stable?
Is anyone at the current time having cm10 with smaphore kernel overclocking at 1.2ghz ?
Does Sgs i9k support the overclock stable?
TheInfamous. said:
Some Qs:
Do i flash semaphore kernel same way i installed ROM?
Will semaphore replace current ROM (cm10)??
Did some1 had any problems with semaphore kernel ? like bricking the phone? is it stable?
Is anyone at the current time having cm10 with smaphore kernel overclocking at 1.2ghz ?
Does Sgs i9k support the overclock stable?
Click to expand...
Click to collapse
You flash semaphore the same way you flashed your rom and it will replace stock cm kernel your rom will stay the same make sure you flash the right version to avoid any bricking. It makes cm run better. Overclock depends on your phone some people can overclock high some not so much. Download semaphore changer governor to sio and liveoc to 110% and set min frequenci 400Mhz. That should be enough to make it supper smooth
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 12:54 AM ---------- Previous post was at 12:51 AM ----------
darkknigh_t said:
You flash semaphore the same way you flashed your rom and it will replace stock cm kernel your rom will stay the same make sure you flash the right version to avoid any bricking. It makes cm run better. Overclock depends on your phone some people can overclock high some not so much. Download semaphore changer governor to sio and liveoc to 110% and set min frequenci 400Mhz. That should be enough to make it supper smooth
EDIT: make sure after flashing to download semaphore manager from the playstore its like a control panel for semaphore where all the settings are and i repeat make sure you flash the right version for your android version and phone i9000.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Sent from my GT-I9000 using xda app-developers app
darkknigh_t said:
You flash semaphore the same way you flashed your rom and it will replace stock cm kernel your rom will stay the same make sure you flash the right version to avoid any bricking. It makes cm run better. Overclock depends on your phone some people can overclock high some not so much. Download semaphore changer governor to sio and liveoc to 110% and set min frequenci 400Mhz. That should be enough to make it supper smooth
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 12:54 AM ---------- Previous post was at 12:51 AM ----------
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Just making sure i won't brick it...
http://forum.xda-developers.com/showthread.php?t=1786220
i got 4.2.2 that means i can use the 3.0.0 semaphore version? right?
I'm asking again did anyone else did this to their Sgs i9000 with cm10 rom?
And it's 10.1.2 galaxysmtd
TheInfamous. said:
Just making sure i won't brick it... i got 4.2.2 that means i can use the 3.0.0 semaphore version? right? I'm asking again did anyone else did this to their Sgs i9000 with cm10 rom? And it's 10.1.2 galaxysmtd
Click to expand...
Click to collapse
I don't get it why do you want to flash another kernel? Aren't you happy now with smooth CM10.1x? Here on this forum are many flashing freaks who flash and overclock their phones until the device completely crashes.
CM10.1x is excellent already way it is, if you want to even improve it (first of all to get about double battery life) just upgrade it to the newest nightly version of CM10.2 tomorrow (build 20130828), it will finally have all bigger bugs fixed. Very soon, stable CM.10.2 build will be released out of this nightly. This is the thread:
http://forum.xda-developers.com/showthread.php?t=2385178
If you want to do it, just mind that the developer (pawitp) doesn't mention anymore installing gapps, so this would be the workflow from your present ROM:
Do a Nandroid Backup of your CM10.1.2 build before the upgrade!
Go to CWM recovery mode and check first in "install zip" if your zips of the CM10.2 and Gapps for 4.3 are visible on your internal SD card
Wipe data/factory reset
wipe cache
wipe dalvik cache (under "advanced")
Install the nightly ROM zip from internal sdcard using ClockworkMod Recovery
Install Gapps for CM10.2 (Android version 4.3) while still in recovery
Restore /data from Nandroid Backup (the update will wipe your /data) while still in recovery
Reboot system
The partition layout of CM10.2 (beginning from 20130816 nightly) differs of that of CM10/CM10.1. The first install will wipe your /data to switch to the new layout, but after that you may use CWM to restore/backup data of CM10/10.1/10.2 (in CWM recovery under "advanced restore" then "restore data" from your CM10.1 nandroid backup)
This way done, you should have all data, wallpaper, widgets and apps like in your CM10.1 right after the reboot. And wait until tomorrow, when the 20130828 nightly gets released. I've been using "buggy" builds (nightlies between 24 and 27 Aug) without any problems, but some people had problems with them.
Hi there. I have a question at title and need help. Becase mini 2 is too lag and less free ram so i wonder: is there any ways to make my s6500d more smooth and fast. Thaks a lot ^^
sontran_vietnam said:
Hi there. I have a question at title and need help. Becase mini 2 is too lag and less free ram so i wonder: is there any ways to make my s6500d more smooth and fast. Thaks a lot ^^
Click to expand...
Click to collapse
Most custom roms for mini 2 like cyanogenmod does not support overclock. Will just unlock the stock processor speed 1Ghz. I said that, because if you select an higher value phone will crash or reboot.
Just stock rom can be overclocked up to 1,12 Ghz and cm9 at 1,1 Ghz.
Also brian kernel can be installed on stock rom (but camcorder will not work) and cm10.1 but wifi and camera will not work. Brian kernel have 411 mb Ram avaiable for OS.
Also, to make this phone fast you should be rooted and deodexed and rom should be zipalligned with int.d scripts. To boost OS speed use squadzone kernel. To improve rom stability flash lastest 2014 rom from samsung (branded movistar). /Or another rom, but you will also need to de-bloatware it (deleting useless apps/files)
If you need more help just tell me
Sent from my GT-S6500D using Tapatalk 2
MaDaLiNoSt said:
Most custom roms for mini 2 like cyanogenmod does not support overclock. Will just unlock the stock processor speed 1Ghz. I said that, because if you select an higher value phone will crash or reboot.
Just stock rom can be overclocked up to 1,12 Ghz and cm9 at 1,1 Ghz.
Also brian kernel can be installed on stock rom (but camcorder will not work) and cm10.1 but wifi and camera will not work. Brian kernel have 411 mb Ram avaiable for OS.
Also, to make this phone fast you should be rooted and deodexed and rom should be zipalligned with int.d scripts. To boost OS speed use squadzone kernel. To improve rom stability flash lastest 2014 rom from samsung (branded movistar). /Or another rom, but you will also need to de-bloatware it (deleting useless apps/files)
If you need more help just tell me
Sent from my GT-S6500D using Tapatalk 2
Click to expand...
Click to collapse
Oh, thaks for your help. I wonder that: is CM 10.1 stable and less lag than stock rom. And how to fix whitescreen ?
MaDaLiNoSt said:
Most custom roms for mini 2 like cyanogenmod does not support overclock. Will just unlock the stock processor speed 1Ghz. I said that, because if you select an higher value phone will crash or reboot.
Just stock rom can be overclocked up to 1,12 Ghz and cm9 at 1,1 Ghz.
Also brian kernel can be installed on stock rom (but camcorder will not work) and cm10.1 but wifi and camera will not work. Brian kernel have 411 mb Ram avaiable for OS.
Also, to make this phone fast you should be rooted and deodexed and rom should be zipalligned with int.d scripts. To boost OS speed use squadzone kernel. To improve rom stability flash lastest 2014 rom from samsung (branded movistar). /Or another rom, but you will also need to de-bloatware it (deleting useless apps/files)
If you need more help just tell me
Sent from my GT-S6500D using Tapatalk 2
Click to expand...
Click to collapse
One more question. I want to overclocked mini 2 stock rom (rooted), how could i do that ?
Thaks for your help
sontran_vietnam said:
One more question. I want to overclocked mini 2 stock rom (rooted), how could i do that ?
Thaks for your help
Click to expand...
Click to collapse
sontran_vietnam said:
Oh, thaks for your help. I wonder that: is CM 10.1 stable and less lag than stock rom. And how to fix whitescreen ?
Click to expand...
Click to collapse
1)To root mini 2 is enough to install clockworkmod recovery and reboot phone. If you're not rooted it will ask you if you want to write su (superuser) binary.
To overclock stock rom you will need to install squadzone's kernel from an custom recovery like cwm or twrp.
2) Mini 2 does not have full working custom roms like stock rom. Cyanogenmod 10.1 rom have problems with fm radio and whitescreen. Well, all mini 2 cm have that problems.
If you decided to use cm10.1 and you want to boost it , delete useless apps (not neessary apps), like voice dialer or vpn config, gmail, dev tools, and other apps that you don't use.
Also, I need to mention here that all mini 2 custom roms have a problem with camcorder performance. It will lag while you rec. a video. I noticed , the bad video performance on cm10.1 and higher like cm10.2, cm11 (games have graphical issues instead stock rom) .
Else I don't know what to do to boost cm...
Playstore promoted apps in app or ads will just clear ram, and tell you to delete useless user apps.
There are 2 kind of apps:
-user apps (installed from playstore, sdcard, ext. sdcard, adb...)
-system apps (preinstalled rom apps, like phone , internet browser..., this apps can be deleted from rom .zip , before you flash it/ or if you're rooted, download root browser and go to system/app and delete what you want.)
Just search on internet (google) squadzone kernel mini 2 s6500, and flash it.
Tell me if you don't found it. I have it saved on my sdcard, and I will upload it. :thumbup:
Sent from my GT-S6500D using Tapatalk 2
Sent from my GT-S6500D using Tapatalk 2
So if i flash that custom kernel using only for stock rom (rooted), does it have any bugs ??
And one more thing, if i dowload some game like gta vice city, play it stable on what? CM 10.1 or stock rom (rooted and overclocked)
Thaks alot
MaDaLiNoSt said:
1)To root mini 2 is enough to install clockworkmod recovery and reboot phone. If you're not rooted it will ask you if you want to write su (superuser) binary.
To overclock stock rom you will need to install squadzone's kernel from an custom recovery like cwm or twrp.
2) Mini 2 does not have full working custom roms like stock rom. Cyanogenmod 10.1 rom have problems with fm radio and whitescreen. Well, all mini 2 cm have that problems.
If you decided to use cm10.1 and you want to boost it , delete useless apps (not neessary apps), like voice dialer or vpn config, gmail, dev tools, and other apps that you don't use.
Also, I need to mention here that all mini 2 custom roms have a problem with camcorder performance. It will lag while you rec. a video. I noticed , the bad video performance on cm10.1 and higher like cm10.2, cm11 (games have graphical issues instead stock rom) .
Else I don't know what to do to boost cm...
Playstore promoted apps in app or ads will just clear ram, and tell you to delete useless user apps.
There are 2 kind of apps:
-user apps (installed from playstore, sdcard, ext. sdcard, adb...)
-system apps (preinstalled rom apps, like phone , internet browser..., this apps can be deleted from rom .zip , before you flash it/ or if you're rooted, download root browser and go to system/app and delete what you want.)
Just search on internet (google) squadzone kernel mini 2 s6500, and flash it.
Tell me if you don't found it. I have it saved on my sdcard, and I will upload it. :thumbup:
Sent from my GT-S6500D using Tapatalk 2
Sent from my GT-S6500D using Tapatalk 2
Click to expand...
Click to collapse
Could u give me that kernel. Link on intenet is died @@
sontran_vietnam said:
Could u give me that kernel. Link on intenet is died @@
Click to expand...
Click to collapse
Uploaded bellow. Thanks button? :good: :laugh:
sontran_vietnam said:
So if i flash that custom kernel using only for stock rom (rooted), does it have any bugs ??
And one more thing, if i dowload some game like gta vice city, play it stable on what? CM 10.1 or stock rom (rooted and overclocked)
Thaks alot
Click to expand...
Click to collapse
Squadzone kernel does not have bugs till MD1 PDA verdsion.
If you flash MK1 ROM, wifi will be broken. A fix for that is avaiable on dev forum.
Last summer I've tried to flash squadzone's kernel into CyanogenMod 10.1 but I had a bootloop!
MaDaLiNoSt said:
Squadzone kernel does not have bugs till MD1 PDA verdsion.
If you flash MK1 ROM, wifi will be broken. A fix for that is avaiable on dev forum.
Click to expand...
Click to collapse
thaks a lot.
In case of when i flash this kernel, after that i want to flash CM 10.1, is that just go to recovery, wipe all and flash CM10.1 or anything else?
Can u give me some ROM smooth and fast. less heavy than stock rom ?
Thanks for yoir help
Antox97 said:
Last summer I've tried to flash squadzone's kernel into CyanogenMod 10.1 but I had a bootloop!
Click to expand...
Click to collapse
squadzone kernel can be used only on stock rom.
MaDaLiNoSt said:
squadzone kernel can be used only on stock rom.
Click to expand...
Click to collapse
After flashed kernel, i cant turn on wifi ( help me please
sontran_vietnam said:
After flashed kernel, i cant turn on wifi ( help me please
Click to expand...
Click to collapse
wifi fix is here : click
direct download : click
zip is not flashable, you will need to replace that file with root explorer!
:good:
MaDaLiNoSt said:
wifi fix is here : click
direct download : click
zip is not flashable, you will need to replace that file with root explorer!
:good:
Click to expand...
Click to collapse
Thaks alot, my wifi is normal again.
sontran_vietnam said:
Thaks alot, my wifi is normal again.
Click to expand...
Click to collapse
Thanks button? :laugh:
MaDaLiNoSt said:
squadzone kernel can be used only on stock rom.
Click to expand...
Click to collapse
Yes, now I know.. I was trying 'cause I was courious lol :cyclops:
Cm10.1 without bugs
You could flash the cm10.1 improved by bleached without bugs which comes with 410mb RAM and other bugs fixed and it works fine
Davi9d said:
You could flash the cm10.1 improved by bleached without bugs which comes with 410mb RAM and other bugs fixed and it works fine
Click to expand...
Click to collapse
Yep man! I have this ROM right now and it's very stable!
Sent from my GT-S6500 using XDA Free mobile app
But you can't overclock your sgm2 if you do that you get bluescreen and reboot. For me the squadzone kernel is very awesome and smooth in games. Even in higher games im running on custom rom with squadzone kernel 1.1overclock
Sent from my GT-S6500D using XDA Free mobile app
Hi, guys in the next days i think to buy Samsung GALAXY S and i want to update the ROM and the KERNEL i also think when i do that to overclock the CPU a little. Suggestions what rom and kernel to use ? (sorry for my bad english)
MachineZZ said:
Hi, guys in the next days i think to buy Samsung GALAXY S and i want to update the ROM and the KERNEL i also think when i do that to overclock the CPU a little. Suggestions what rom and kernel to use ? (sorry for my bad english)
Click to expand...
Click to collapse
Read this.
If you want a fast device then try Mackay ICS.
For gaming try CyanAOSP (Jelly Bean), CyanAOSP (KitKat).
For customizations try Cyanogenmod or Cyanogenmod based ROMS.
Also Omni is pretty good.
kalpetros said:
Read this.
If you want a fast device then try Mackay ICS.
For gaming try CyanAOSP (Jelly Bean), CyanAOSP (KitKat).
For customizations try Cyanogenmod or Cyanogenmod based ROMS.
Also Omni is pretty good.
Click to expand...
Click to collapse
Thanks! I think to use Semaphore Kernel and CyanAOSP
MachineZZ said:
Thanks! I think to use Semaphore Kernel and CyanAOSP
Click to expand...
Click to collapse
That's a good choice. To take advantage of the Semaphore's kernel features download Semaphore Manager from Play Store.
If you want to overclock your device choose 1.2 MHz and the ondemand Governor. Also for 400+ MB of RAM choose the s Semaphore version and also download the Bigmem libs.
Can i Overclock the cpu more than 1.2Ghz ?
Sent from my PAP3540DUO using XDA Free mobile app
MachineZZ said:
Can i Overclock the cpu more than 1.2Ghz ?
Sent from my PAP3540DUO using XDA Free mobile app
Click to expand...
Click to collapse
Yes you can but not with Semaphore kernel. Mackay kernel supports up to 1.4 MHz.
Keep in mind that with clock speeds over 1.2 MHz you will experience a lot of crashes and reboots, your device will get hot etc.
Now i understood thanks!
Sent from my PAP3540DUO using XDA Free mobile app
When im installing the rom (CyanAOSP) and the kernel (Semaphore) is it need to have installed custom 4.3 or 4.4 ROM first ? Or i can install everyting from the stock rom ?
Sent from my PAP3540DUO using XDA Free mobile app
You might lose your IMEI if you install 4.4 straight from stock. The right way is to install ICS first then JB and finally KK (or you can install KK straight from ICS).
kalpetros said:
You might lose your IMEI if you install 4.4 straight from stock. The right way is to install ICS first then JB and finally KK (or you can install KK straight from ICS).
Click to expand...
Click to collapse
Can i install the the semaphore kernel while im using stock rom or first i need to install CyanAOSP [JB] or Mackay ICS ?
MachineZZ said:
Can i install the the semaphore kernel while im using stock rom or first i need to install CyanAOSP [JB] or Mackay ICS ?
Click to expand...
Click to collapse
Install the ROM first. Make sure to choose the correct Semaphore kernel for your ROM.
Can you tell me what kernel i need for cyanAOSP JB or mackay ics and then i want to install cyanAOSP KK.
Sent from my PAP3540DUO using XDA Free mobile app
MachineZZ said:
Can you tell me what kernel i need for cyanAOSP JB or mackay ics and then i want to install cyanAOSP KK.
Sent from my PAP3540DUO using XDA Free mobile app
Click to expand...
Click to collapse
You only need to flash a kernel once you install the final ROM, in your case KK.
Thanks
Sent from my PAP3540DUO using XDA Free mobile app
be carefull
Hi to all
After to try upgrade my GT-I9000 by KIES (realy bad choice) my phone crash and can't coming back in original without any issues.
I was going and in samsung service to setback but the problems are still there.
Boot freezings and random of sorry the android.process.media has stopped. acore, keybord etc.
I try to fix them first by cache or apps settings but no luck- i was try everything.
Next step for - i had a feeling my phone is not dead and i can't to use it like this - is try to fount a rom in all net.
To many rom's and installs clears with full format or not - with xp,7 or 8 - but all they have same problems (slim,paranoid,etc.). Full of Sorry's that service or other has stop and press the ok every sec.or rom apps crash down or freezings and next black screen or freezing and many reboot's auto.
2 weeks try and try again. It must to save my phone.
And yesterday i try another rom.
1. set (must have) the I9000XXJVU_I9000OXAJVU_OXA by ODIN 1.83 with repartition s1_odin_20100512.pit
1st reboot auto and freezing again (many auto reboots) but final open the phone in settings.I didn't stop so must see the next step
2. Set Kernel by Odin again CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.
The phone reboot but boot over and over without go in. Again i didn't stop so i go in recovery (other way to take the install file) and mount usb (i can't go in phone) and take the ICS_4.0.3_MR1-RC4.2_I9000 rom in internal sd (no external sd and no sim in the phone).
3. Clear the data/factory, reset data cache and dalvic cache and install it (i can say the install it was slowest by the others rom's and more stady in the load bar).
No extra gapps files to install need.
The phone auto reboot and i wait with hope again.
Boom. The phone open in the setting without single problem.:victory:
The Ice Cream Sandwich 4.0 is there all works perfect !!!!!!!!!!!!!
I save my phone and is realy fast because the phone have a realy good hardwear.
So the Final answer is the rom must fit in your phone
I hope to help i wish a nice day to all.
Files ice Cream 4 Samsung GT-I 9000
Need 10 post to upload the links......:crying:
files ice 4.0 by text for SAMSUNG GT-I 9000
lordsaboteur said:
Need 10 post to upload the links......:crying:
Click to expand...
Click to collapse
That is the links by text file just copy and paste in anddress window bronser.
Hi guys!
Stock ROM OverClock How to?
If you want to stay on stock rom you can install CroPol Kernel to OC CPU up to 1.2 GHz and the GPU up to 729MHz (stock is 400). But keep in mind that your WiFi won't work on Stock.
OC is only possible if the kernel supports it - and stock kernel doesn´t.
CyanogenMod charge eats too much. So I had to use the Stock ROM. Rootl already. I picked up the absurd application of the Samsung phone but still does not work fast. OC Kernel does not work on stock ROM kernel. OC kernel have installed the WiFi does not work. What can I do to speed up the phone?
I'm using Google translation. I hope you understand what I said.
Berkant Ayhan Karabudak said:
CyanogenMod charge eats too much. So I had to use the Stock ROM. Rootl already. I picked up the absurd application of the Samsung phone but still does not work fast. OC Kernel does not work on stock ROM kernel. OC kernel have installed the WiFi does not work. What can I do to speed up the phone?
I'm using Google translation. I hope you understand what I said.
Click to expand...
Click to collapse
install this amazing rooted stock ROM, after that
a) flash CrossBreeder 7.2.13 and
b) install Performance Control
This 3 things will make your device fly ...
moonryder said:
install this amazing rooted stock ROM, after that
a) flash CrossBreeder 7.2.13 and
b) install Performance Control
This 3 things will make your device fly ...
Click to expand...
Click to collapse
Thank you. Phone officially took flight. :good: