http://forum.xda-developers.com/showthread.php?t=1783064
I follow the instructions but when I tried to install the rom was rebooting and now I can not install any other rom with the error:
"E: failed to verify whole-file signature"
"E: signature verification failed"
What happened?
My system now
Firmware version
2.3.3
Baseband version
I897UCKF1
Kernel version
2.6.35.7-I897UCKF1-CL273832
Build number
GINGERBREAD.UCKF1
U need a kernel with CWM Recovery to flash from...not Stock kernel.
See TRusselo's Flashing Guide that is a stickied thread in the Q & A Forum.
Sent from my SAMSUNG-SGH-I897 using xda premium
I had almost same issue when I was trying to revert back from slimbeans as the JB installation changed the partitions on my phone memory. I had to restore stock via odin using a PIT file for repartitioning the memory to its original.
I think the same should help you.
desiwizard said:
I had almost same issue when I was trying to revert back from slimbeans as the JB installation changed the partitions on my phone memory. I had to restore stock via odin using a PIT file for repartitioning the memory to its original.
I think the same should help you.
Click to expand...
Click to collapse
where you see or get file PIT?
tks
4-2ndtwin said:
U need a kernel with CWM Recovery to flash from...not Stock kernel.
See TRusselo's Flashing Guide that is a stickied thread in the Q & A Forum.
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
I tried, but not flash kernel and rom, freeze in home screen load samsung...
Please tell me what I have done wrong.
I am getting "E:failed to seek in /cache/update.zip (Invalid argument)" followed by "E: signature verification failed".
I have got this from both cm-10-20121107-NIGHTLY-p1.zip and both cm-10-20121108-NIGHTLY-p1.zip both of which are in the root of my sd card.
You can't use stock (3e) recovery.
You must use CWM recovery.
Sent from my GT-P1000 using xda app-developers app
You also posted in the wrong section of the forum. Questions go in the Q&A section. Please post correctly going forward.
I also deleted your duplicate post as you should only post once and kept this one as had a response already.
Thanks
AvRS
Re: Cyanogen on P1000'
priyana said:
You can't use stock (3e) recovery.
You must use CWM recovery.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Please be more specific for I get the same result when I Reboot into Recovery from my ROM Manager. ie I still get the same error messages.
I have posted the same thing about 100 times by now.
You could have searched.
Forget ROM Manager.
Use overcome method.
[ROM][2.3.6] Overcome Rom 4.1.0 new links
http://forum.xda-developers.com/showthread.php?t=1881981
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
(BTW you can just jump to page 7 of the PDF to the Odin part)
Stop there and you will have good stock Gingerbread that works with the next step.
Continue just one more step by flashing Overcome Kernel 4.0 tar
using Odin as per guide.
You will have CWM in the most reliable way.
This cwm is what you need.
Sent from my GT-P1000 using xda app-developers app
Hi
I tried to flash Slim Bean 3 on my original ICS (N7000XXLRK) and it's rooted but it just give me this massage
"Verifying update package...
E:failed to verify whole-file signature
E:signature verification failed"
and i do not what is it means
i tried to flash with hydra core 7 kernel and give me the same massage
please if any one know the solution for this help
thanks alot
I guess you are using stock recovery to do this. lucky that you survived.
you need to use cwm to install the rom.
download philz kernel lrk and install it the same was as you are doing now. Once done reboot into recovery and install the ron
hi
I'm writing for the first time although I've been visiting the forum for couple of weeks as I'm facing a problem with my samsung SGH-I897.
PROBLEM HISTORY
it was a present to me which was already rooted and loaded with ICS rom (I can't remember the version, kernel, baseband or build no). 2 weeks back, I tried to upgrade the phone with JB Slim custom rom (www.android.gs/update-galaxy-captivate-i897-jelly-bean-slim/) but stuck with AT&T bootlogo. I tried to go back to ICS again but accidentally did something wrong in CWM recovery (don't know the version) for which CWM went back to original 3e version.
Since then I couldn't load any rom (by CWM or Odin) bcos there was error in CWM saying failed to mount /dbdata... etc. 2 days ago I found a fix for that in blog.kalpetros.com/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
Then I loaded GB rom 2.3.5 , baseband I897UCKJ1 , kernel 2.6.35.7-I897UCKJ1-CL614489 . But my CWM is still 3e.
THE PROBLEM NOW
1) I am trying to update the captivate but every time I try to update I get this:
-- Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted.
I've tried Lanight, Slim Rom (again) but no use. what should I do?
2) Maybe there is a kernel issue (it says here forum.xda-developers.com/showthread.php?t=1874327 ). So to flash new kernel I followed the instruction from androidprof.blogspot.com/2013/02/upgrading-rooting-and-then-installing.html?goback=%2Egde_86481_member_213543419 and forum.xda-developers.com/showthread.php?t=1350266 but Odin hangs at midpoint and the captivate becomes softbricked. Then again I have to load the GB. is the odin defective? (I used odin 1.85 & odin3)
3) I tried to load GB I897UCKK4 by one click odin installer but it hanged everytime. why?
thanx in advance
Sent from my GT-I9070 using xda app-developers app
shiploo35 said:
hi
I'm writing for the first time although I've been visiting the forum for couple of weeks as I'm facing a problem with my samsung SGH-I897.
PROBLEM HISTORY
it was a present to me which was already rooted and loaded with ICS rom (I can't remember the version, kernel, baseband or build no). 2 weeks back, I tried to upgrade the phone with JB Slim custom rom (www.android.gs/update-galaxy-captivate-i897-jelly-bean-slim/) but stuck with AT&T bootlogo. I tried to go back to ICS again but accidentally did something wrong in CWM recovery (don't know the version) for which CWM went back to original 3e version.
Since then I couldn't load any rom (by CWM or Odin) bcos there was error in CWM saying failed to mount /dbdata... etc. 2 days ago I found a fix for that in blog.kalpetros.com/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
Then I loaded GB rom 2.3.5 , baseband I897UCKJ1 , kernel 2.6.35.7-I897UCKJ1-CL614489 . But my CWM is still 3e.
THE PROBLEM NOW
1) I am trying to update the captivate but every time I try to update I get this:
-- Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted.
I've tried Lanight, Slim Rom (again) but no use. what should I do?
2) Maybe there is a kernel issue (it says here forum.xda-developers.com/showthread.php?t=1874327 ). So to flash new kernel I followed the instruction from androidprof.blogspot.com/2013/02/upgrading-rooting-and-then-installing.html?goback=%2Egde_86481_member_213543419 and forum.xda-developers.com/showthread.php?t=1350266 but Odin hangs at midpoint and the captivate becomes softbricked. Then again I have to load the GB. is the odin defective? (I used odin 1.85 & odin3)
3) I tried to load GB I897UCKK4 by one click odin installer but it hanged everytime. why?
thanx in advance
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
From your signature, you have a GT-I9070, which is a different device. This section is for the Captivate.
Perhaps this link can help you: http://forum.xda-developers.com/showthread.php?t=1985398
NO, it's Captivate
BWolf56 said:
From your signature, you have a GT-I9070, which is a different device. This section is for the Captivate.
Perhaps this link can help you: http://forum.xda-developers.com/showthread.php?t=1985398
Click to expand...
Click to collapse
I used my wife's cell to post. So it is Captivate SGH-I897 that is giving me problem.
See TRusselo's Guide here ---> http://forum.xda-developers.com/showthread.php?p=19425513
Sent from my SAMSUNG-SGH-I747 using xda premium
tried and didn't work
4-2ndtwin said:
See TRusselo's Guide here ---> http://forum.xda-developers.com/showthread.php?p=19425513
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Yes I've tried but odin hangs during flashing of speedmod kernel (everytime).
THANX anyway.
Did ya take a look at this Captivate - PC Connection Issues thread ?? ...http://forum.xda-developers.com/showthread.php?p=33227541
And u could flash the .tar file of KK4 Corn Kernel instead of the Speedmod kernel...http://forum.xda-developers.com/showthread.php?p=18233847
Sent from my SAMSUNG-SGH-I747 using xda premium
odin hangs
4-2ndtwin said:
Did ya take a look at this Captivate - PC Connection Issues thread ?? ...http://forum.xda-developers.com/showthread.php?p=33227541
And u could flash the .tar file of KK4 Corn Kernel instead of the Speedmod kernel...http://forum.xda-developers.com/showthread.php?p=18233847
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
thank you 4-2ndtwin,
I think the pc connection is ok bcos I can flash the GB 2.3.5 I897UCKJ1 ROM by odin 3. (infact it's the only ROM I can flash)
And Odin cannot flash the kk4 kernel, it hangs at midpoint.
SO FAR HERE GOES THE SUMMERY
I can only flash the above mentioned ROM. No other ROM, kernel, CWM recovery can't be loaded by Odin 1.85 or 3.
Same goes for flashing through recovery mode. there's always signature verification failure error (see 1st post)
bad usb driver, connector or cable can cause intermittent fail like that, mid flash, even though it looks okay when you start. also, have you tried redownloading your sources? signature verification can mean failed md5 checksum= corrupt source file.
Out of curiosity, did you accidentally enable the signature verification in speedmod? I did that yesterday while installing Captivating and it'll throw the signature verification error lol. Just click it again in CWM and you should be able to get passed the signature verification.
laughingT said:
bad usb driver, connector or cable can cause intermittent fail like that, mid flash, even though it looks okay when you start. also, have you tried redownloading your sources? signature verification can mean failed md5 checksum= corrupt source file.
Click to expand...
Click to collapse
I don't know, if it's bad usb driver, connector or cable how come they always give trouble during flashing everything except I897uckj1 rom?
and, I'll try redownloading the sources (have to browse the history)
nope
x0ne215 said:
Out of curiosity, did you accidentally enable the signature verification in speedmod? I did that yesterday while installing Captivating and it'll throw the signature verification error lol. Just click it again in CWM and you should be able to get passed the signature verification.
Click to expand...
Click to collapse
there's no such option in my cwm. the cwm is 3e and very limited. it has only 4 option... reboot, update from zip, wipe factory data, wipe cache.
CWM and 3e recovery are 2 different things. CWM is a CUSTOM recovery, 3e is the stock recovery. It sounds like you're still on stock recovery.
Have you tried using ADB to push a CWM recovery.img to the device? There should be some tutorials or posts on other threads here about doing it. I had to do that for my Pantech Crossover.
Once you do that, you can flash a ROM no problem.
x0ne215 said:
... It sounds like you're still on stock recovery
Have you tried using ADB to push a CWM recovery.img to the device?....
Once you do that, you can flash a ROM no problem.
Click to expand...
Click to collapse
ok thanx, this ADB thing is sounds complicated to me. but I'll learn it.
bad news
ok... bad news.. phone is hard bricked... no download mode, no charging battery display when plugged to wall... this is going near to the end.
Time to build a jig. See the how to if you want to diy. There are a few you can buy online if you're lazy
Sent from my SGH-I897 using xda app-developers app
It's quicker and easier to just do it yourself, there's a no solder method on the forums here.
I'm trying
yes.. I'm following this 2 solderless threads jig without cutting usb cord and jig with cutting usb cord
but no luck yet, have to identify the problem. is there any suggestions about these methods or any other?
What problem? Only follow 1 of the guides, they're different, hence why there's 2.
Hello,
Rooted the Galaxy tab and installed an AOKP ROM, trying to restock it following Overcome directions. With Odin, everything works perfectly but after reboot, I get...
Installation aborted
E: Signature Verification failed.
In recovery mode, e3 there is no option to disable signature Verification.
I am stuck, browsed all over for days. Any help, any suggestions?! Thanks.
Sent from my GT-I9300 using xda app-developers app
cmugume said:
Hello,
Rooted the Galaxy tab and installed an AOKP ROM, trying to restock it following Overcome directions. With Odin, everything works perfectly but after reboot, I get...
Installation aborted
E: Signature Verification failed.
In recovery mode, e3 there is no option to disable signature Verification.
I am stuck, browsed all over for days. Any help, any suggestions?! Thanks.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I think you need to flash Overcome at least 3 times to get it work properly...