Related
Hey everyone, I'm trying to play with a couple ROMS, starting with the Darky 7.7 ROM from stock Froyo 2.2 on a Galaxy S i9000.
I've done the following:
1) Rooted the phone using SuperOneClick (proven to be rooted with ROM Manager).
2) Transfered the Darkys ROM.zip to the internal SD Card
3) Downloaded and copied ClockworkMod from the original post (file is update.zip) and transferred this to my internal SD Card
4) Gone into ROM Manager, selected Flash ClockWorkMod Recovery
5) Select Install ROM from SD card
6) Selected Darkys_V7.7_Gingerbread_.....zip
7) Prompted with Backup Existing, or Wipe Data and Cache. I chose Wipe. It tells me I will be brought into recovery to continue.
8) Chose apply sdcard:update.zip
Receive the following error:
Install default apk-files, finished
--Install from sdcard...
Finding update package...
Opening update package...
Verifiying update package...
E: Failed to verify whole-file signature
E: Signature verification failed
Installation aborted.
Where have I gone wrong? Any help is appreciated
Go to recovery mode (power off then vol up+home+power). If you're already using clockworkmod, then select install zip from sd card. If you're not using cwm yet, select install update.zip to give you cwm then choose install zip in sdcard.
Sent from my GT-I9000 using XDA App
Kops said:
E: Failed to verify whole-file signature
E: Signature verification failed
Installation aborted.
Click to expand...
Click to collapse
You need to install a kernel that has 2e recovery, this version doesn't verify file signatures, or go back to 2.1.
I see now when I enter recovery mode at the top it says Android Recovery 3e. I'm assuming that should say Clockworkmod Recovery.
It is the next step I'm stumped with
What is an example of a kernel that runs 2e? Flashing is done through ODIN correct? Can you help me figure out how to flash in ODIN, or where I can find a 2e kernel for my i9000?
Grab the latest speed mod kernel from hardcore in the dev section, flash that via odin and it will be 2e recovery. Then follow darkys instructions and flash his rom. After his rom is on depending on where you are you might have to flash your original stock modem but only do that if your phone doesn't register on your network.
Sent from my GT-I9000 using XDA App
spectre85 said:
Grab the latest speed mod kernel from hardcore in the dev section, flash that via odin and it will be 2e recovery. Then follow darkys instructions and flash his rom. After his rom is on depending on where you are you might have to flash your original stock modem but only do that if your phone doesn't register on your network.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I am having difficulties flashing via ODIN. Can you help me find some help, perhaps an ODIN guide of some kind?
I have found a UGJH2 kernel that should be 2e recovery, now I just need to learn to flash it.
Kops said:
I am having difficulties flashing via ODIN. Can you help me find some help, perhaps an ODIN guide of some kind?
I have found a UGJH2 kernel that should be 2e recovery, now I just need to learn to flash it.
Click to expand...
Click to collapse
open odin Put kernel into pda put phone into download mode then connect phone to pc.. The comm port will turn yellow the pres start. Does that stock kernel have 2e?
Can someone people tell me what odim in.. I'm new to this and I've rooted/installed rom on my phone but I'm planning to do more to it.. finding the best rom and stuff.
Sent from my SAMSUNG-SGH-I897 using XDA App
i897-63784 said:
Can someone people tell me what odim in.. I'm new to this and I've rooted/installed rom on my phone but I'm planning to do more to it.. finding the best rom and stuff.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
ODIN is a program that flashes individual kernels, CSC's, modems and other bits to your phone. It's one of the methods used to flash ROMs also. If you search the forums (or even Google) you should be able to get everything together. I recommend searching for ODIN, the 512 pit file, and then following the instructions below to re-root your phone.
http://forum.xda-developers.com/showpost.php?p=8238938&postcount=1
Any problems you can PM me.
Kops said:
I am having difficulties flashing via ODIN. Can you help me find some help, perhaps an ODIN guide of some kind?
I have found a UGJH2 kernel that should be 2e recovery, now I just need to learn to flash it.
Click to expand...
Click to collapse
Check my post below, it hopefully should help, if not, you can PM me.
Ok so i just rooted my sgs with superoneclick and im trying to install cwm recovery but when it reboots its starts in my normal recovery (3e) and fails during install. Can someone guide me in the right direction?This is what it says:
installing package
Finding update package
Verifying update package
E:failed to verify whole file signature
E:signature verification failed
I have tried over a wifi connection and 3g but both to no avail.
Model GT I9000M
Firmware 2.3.3
Baseband I9000UGKG3
Kernel 2.6.35.7-I9000UGKG3
[email protected]#2
Build Gingerbread.GKG3
PS I have no problem flashing using odin and starting from scratch. I just want my phone to run to the best of its ability. So please reccomend the best build, rom, theme and apps to have too.
Thanks in advance to all responses.
well 3e recovery can't flash unsigned zips from recovery so try flashing another kernel via odin that has support for i9000m
Any ideas on the best kernel to flash that supports i9000m?
Sent from my GT-I9000M using XDA App
Since you know how to flash. Go to this link to download and flash JVT pda, kg3 modem and csc with 512pit in odin. It wont bootloop and then you can flash any jvt kernel as pda. http://forum.xda-developers.com/showthread.php?t=1102881
themate1987 said:
Since you know how to flash. Go to this link to download and flash JVT pda, kg3 modem and csc with 512pit in odin. It wont bootloop and then you can flash any jvt kernel as pda. http://forum.xda-developers.com/showthread.php?t=1102881
Click to expand...
Click to collapse
I am having the same problem on my Samsung Galaxy S GT-I9000.
Will the solution you have posted work for me too?
Yes. You can flash any kernel for gt-i9000 you want via odin. But make sure you flash correct version for your firmware or it will give you bootloop
Sent from my GT-I9000 using XDA Premium App
Many thanks! Going to try this now. Been wanting 4.0.1 on my SGS for ages.
Hello.
I'm having almost the same problem.
I can use the usb un the phone.
I have 3e recovery installed and i woul like to instal clockwork mode.
There's a different way to flash clockwork mode?
I've tried from RomManager but the signature is verified and doesn't work.
Thank you in advance.
iepuryla said:
There's a different way to flash clockwork mode? .
Click to expand...
Click to collapse
Yes, it should be flashed using Odin3, together with a kernel, will work better than ROM manger, so go here and follow the instructions.
Check this out! You , YES! you are an " Android ". Not your phone but U.​
Hi everyone.
As written in the title, is there Odin Flashable ICS/JB rom?
Or is there any method to make one?
My cappy hit by EU bug.
I tried using the workaround.
I now managed to flashed ficeto base rom (DarkyROM 10.1) by using Odin.
But I failed to flash any other rom due to android recovery system 3e popped message saying 'signature verification failed'.
I also failed to find any custom recovery suitable for the rom.
Any suggestion?
Thanks in advanced!!
No, you can't flash those like that because they use a non stock partition layout. You should be able to flash any Samsung based kernel appropriate for your version of android, and that will give you CWM.
Sent from my SGH-I777 using xda premium
korockinout13 said:
No, you can't flash those like that because they use a non stock partition layout. You should be able to flash any Samsung based kernel appropriate for your version of android, and that will give you CWM.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
I failed to flash any rom or any theme zip with android system recovery 3e.
It shows " E:Short write of /tmp/sideload/package.zip (No space left on device) ".
What should I do?
Sorry that I'm so noob.
Thanks in advanced.
solo012 said:
I failed to flash any rom or any theme zip with android system recovery 3e.
It shows " E:Short write of /tmp/sideload/package.zip (No space left on device) ".
What should I do?
Sorry that I'm so noob.
Thanks in advanced.
Click to expand...
Click to collapse
Here comes the obvious question.. Is there enough free space on your cell? (Make sure there is..)
You should be able to flash a custom kernel (with cwm) through Odin 1.85 and from there, flash the ROM that you want.
BWolf56 said:
Here comes the obvious question.. Is there enough free space on your cell? (Make sure there is..)
You should be able to flash a custom kernel (with cwm) through Odin 1.85 and from there, flash the ROM that you want.
Click to expand...
Click to collapse
Nope, he says he has 3e recovery meaning you can't flash anything... Odin a kernel and it will give you CWM.
Sent from my SGH-I777 using xda premium
korockinout13 said:
Nope, he says he has 3e recovery meaning you can't flash anything... Odin a kernel and it will give you CWM.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Oh missed that part, was too obvious . So yeah, refer to the 2nd line of my post lol
Hi!
I try to get upgrade my tab to Android Jelly Bean, but I find this a bit difficult.
I rooted my device with SuperOneClick and it worked, but when I try to instal the ROM I get this message: signature verification failed.
Have been searching around the internet, but I'm not very good at this.
Basically I need someone to explain what to do in a simple matter :fingers-crossed:
Would appreciate if you could help me!
you can't flash custom ROM using stock recovery. that is for Samsung signed updates only.
Follow my signature for overcome method.
Please note this: don't need to follow all the way to flash Overcome ROM.
You only want to get to a baseline stock rom (GB-stock-safe-v5).
The you flash overcome kernel, which gives you CWM recovery.
With that, you flash the jelly bean according to the custom ROM instruction.
@@
priyana said:
you can't flash custom ROM using stock recovery. that is for Samsung signed updates only.
Follow my signature for overcome method.
Please note this: don't need to follow all the way to flash Overcome ROM.
You only want to get to a baseline stock rom (GB-stock-safe-v5).
The you flash overcome kernel, which gives you CWM recovery.
With that, you flash the jelly bean according to the custom ROM instruction.
Click to expand...
Click to collapse
Is it possible to upgrade from 2.3.7 to 4.0.4 ? Mine use Galaxy Tab P1000
Yes, even to 4.1.2 or 4.2.2
The procedure is exactly the same as I quoted above.
Sent from my GT-P1000 using xda app-developers app
help needed
priyana said:
you can't flash custom ROM using stock recovery. that is for Samsung signed updates only.
Follow my signature for overcome method.
Please note this: don't need to follow all the way to flash Overcome ROM.
You only want to get to a baseline stock rom (GB-stock-safe-v5).
The you flash overcome kernel, which gives you CWM recovery.
With that, you flash the jelly bean according to the custom ROM instruction.
Click to expand...
Click to collapse
hi,
i bricked my galaxy tab p100 few days ago but some how i followed instructions here and there and unbricked using odin. everything seems to work fine but i cannot sign in to gmail and any other google apps. my tab doesnt connect through mobile network too. wifi works.
can u suggest me on how to overcome this issue?
thanks in advance
Which rom? If aosp based, have you flash gapps?
Mobile network, what us your IMEI? 35xxxx ( good) or 0049xxx ( bad).
Sent from my GT-I9300 using xda app-developers app
prazhantkarki said:
hi,
i bricked my galaxy tab p100 few days ago but some how i followed instructions here and there and unbricked using odin. everything seems to work fine but i cannot sign in to gmail and any other google apps. my tab doesnt connect through mobile network too. wifi works.
can u suggest me on how to overcome this issue?
thanks in advance
Click to expand...
Click to collapse
Regarding the mobile networks, do you get signal at all? Check that your APN settings are entered correctly & you're using the right modem.
As mentioned, be sure you're on the right gapps for your build if you're using an aosp rom.
priyana said:
Yes, even to 4.1.2 or 4.2.2
The procedure is exactly the same as I quoted above.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Recently i'm reflash to GB stock which is the version "Android 2.3.6 Gingerbread [XWJQ8]". But after that,I did a factory reset.
Than I flashed the original Gingerbread ROM. Odin didn't give me any error message, but after the tab rebooted I got stucked in a "recovery screen" with the following message in red:
E: Failed to mount /data (invalid argument)
E: install-application-for-customer: Can't mount /data
your storage not prepared yet. please use UI menu for format and reboot actions.
There was an option for format in this recovery screen, but I was unable to select it. The volume up/down keys worked to navigate in the options, but the power button didn't make the selection.
I force the tab to shut down keep pressing the power button. Started it again and the same screen showed up.
Could you help me, which part i was fail because of this?
Try the home button as OK button in stock recovery.
Edit:
BTW, which ROM did you come from? If you were from anything that is AOSP, likely you have MTD partition.
You need a full restock with pit file and "repartition" checked in Odin to get back to BML partition that stock ROM requires.
If your ROM file doesn't have it, you better use Overcome method and its GB-stock-safe-v5 that has it.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Try the home button as OK button in stock recovery.
Edit:
BTW, which ROM did you come from? If you were from anything that is AOSP, likely you have MTD partition.
You need a full restock with pit file and "repartition" checked in Odin to get back to BML partition that stock ROM requires.
If your ROM file doesn't have it, you better use Overcome method and its GB-stock-safe-v5 that has it.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Those ROM come from youtube, i don't know much about nametag for AOSP, AOKP etc, and what is MTD and BML for each partition? ...
hi
I'm writing for the first time although I've been visiting the forum for couple of weeks as I'm facing a problem with my samsung SGH-I897.
PROBLEM HISTORY
it was a present to me which was already rooted and loaded with ICS rom (I can't remember the version, kernel, baseband or build no). 2 weeks back, I tried to upgrade the phone with JB Slim custom rom (www.android.gs/update-galaxy-captivate-i897-jelly-bean-slim/) but stuck with AT&T bootlogo. I tried to go back to ICS again but accidentally did something wrong in CWM recovery (don't know the version) for which CWM went back to original 3e version.
Since then I couldn't load any rom (by CWM or Odin) bcos there was error in CWM saying failed to mount /dbdata... etc. 2 days ago I found a fix for that in blog.kalpetros.com/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
Then I loaded GB rom 2.3.5 , baseband I897UCKJ1 , kernel 2.6.35.7-I897UCKJ1-CL614489 . But my CWM is still 3e.
THE PROBLEM NOW
1) I am trying to update the captivate but every time I try to update I get this:
-- Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted.
I've tried Lanight, Slim Rom (again) but no use. what should I do?
2) Maybe there is a kernel issue (it says here forum.xda-developers.com/showthread.php?t=1874327 ). So to flash new kernel I followed the instruction from androidprof.blogspot.com/2013/02/upgrading-rooting-and-then-installing.html?goback=%2Egde_86481_member_213543419 and forum.xda-developers.com/showthread.php?t=1350266 but Odin hangs at midpoint and the captivate becomes softbricked. Then again I have to load the GB. is the odin defective? (I used odin 1.85 & odin3)
3) I tried to load GB I897UCKK4 by one click odin installer but it hanged everytime. why?
thanx in advance
Sent from my GT-I9070 using xda app-developers app
shiploo35 said:
hi
I'm writing for the first time although I've been visiting the forum for couple of weeks as I'm facing a problem with my samsung SGH-I897.
PROBLEM HISTORY
it was a present to me which was already rooted and loaded with ICS rom (I can't remember the version, kernel, baseband or build no). 2 weeks back, I tried to upgrade the phone with JB Slim custom rom (www.android.gs/update-galaxy-captivate-i897-jelly-bean-slim/) but stuck with AT&T bootlogo. I tried to go back to ICS again but accidentally did something wrong in CWM recovery (don't know the version) for which CWM went back to original 3e version.
Since then I couldn't load any rom (by CWM or Odin) bcos there was error in CWM saying failed to mount /dbdata... etc. 2 days ago I found a fix for that in blog.kalpetros.com/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
Then I loaded GB rom 2.3.5 , baseband I897UCKJ1 , kernel 2.6.35.7-I897UCKJ1-CL614489 . But my CWM is still 3e.
THE PROBLEM NOW
1) I am trying to update the captivate but every time I try to update I get this:
-- Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted.
I've tried Lanight, Slim Rom (again) but no use. what should I do?
2) Maybe there is a kernel issue (it says here forum.xda-developers.com/showthread.php?t=1874327 ). So to flash new kernel I followed the instruction from androidprof.blogspot.com/2013/02/upgrading-rooting-and-then-installing.html?goback=%2Egde_86481_member_213543419 and forum.xda-developers.com/showthread.php?t=1350266 but Odin hangs at midpoint and the captivate becomes softbricked. Then again I have to load the GB. is the odin defective? (I used odin 1.85 & odin3)
3) I tried to load GB I897UCKK4 by one click odin installer but it hanged everytime. why?
thanx in advance
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
From your signature, you have a GT-I9070, which is a different device. This section is for the Captivate.
Perhaps this link can help you: http://forum.xda-developers.com/showthread.php?t=1985398
NO, it's Captivate
BWolf56 said:
From your signature, you have a GT-I9070, which is a different device. This section is for the Captivate.
Perhaps this link can help you: http://forum.xda-developers.com/showthread.php?t=1985398
Click to expand...
Click to collapse
I used my wife's cell to post. So it is Captivate SGH-I897 that is giving me problem.
See TRusselo's Guide here ---> http://forum.xda-developers.com/showthread.php?p=19425513
Sent from my SAMSUNG-SGH-I747 using xda premium
tried and didn't work
4-2ndtwin said:
See TRusselo's Guide here ---> http://forum.xda-developers.com/showthread.php?p=19425513
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Yes I've tried but odin hangs during flashing of speedmod kernel (everytime).
THANX anyway.
Did ya take a look at this Captivate - PC Connection Issues thread ?? ...http://forum.xda-developers.com/showthread.php?p=33227541
And u could flash the .tar file of KK4 Corn Kernel instead of the Speedmod kernel...http://forum.xda-developers.com/showthread.php?p=18233847
Sent from my SAMSUNG-SGH-I747 using xda premium
odin hangs
4-2ndtwin said:
Did ya take a look at this Captivate - PC Connection Issues thread ?? ...http://forum.xda-developers.com/showthread.php?p=33227541
And u could flash the .tar file of KK4 Corn Kernel instead of the Speedmod kernel...http://forum.xda-developers.com/showthread.php?p=18233847
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
thank you 4-2ndtwin,
I think the pc connection is ok bcos I can flash the GB 2.3.5 I897UCKJ1 ROM by odin 3. (infact it's the only ROM I can flash)
And Odin cannot flash the kk4 kernel, it hangs at midpoint.
SO FAR HERE GOES THE SUMMERY
I can only flash the above mentioned ROM. No other ROM, kernel, CWM recovery can't be loaded by Odin 1.85 or 3.
Same goes for flashing through recovery mode. there's always signature verification failure error (see 1st post)
bad usb driver, connector or cable can cause intermittent fail like that, mid flash, even though it looks okay when you start. also, have you tried redownloading your sources? signature verification can mean failed md5 checksum= corrupt source file.
Out of curiosity, did you accidentally enable the signature verification in speedmod? I did that yesterday while installing Captivating and it'll throw the signature verification error lol. Just click it again in CWM and you should be able to get passed the signature verification.
laughingT said:
bad usb driver, connector or cable can cause intermittent fail like that, mid flash, even though it looks okay when you start. also, have you tried redownloading your sources? signature verification can mean failed md5 checksum= corrupt source file.
Click to expand...
Click to collapse
I don't know, if it's bad usb driver, connector or cable how come they always give trouble during flashing everything except I897uckj1 rom?
and, I'll try redownloading the sources (have to browse the history)
nope
x0ne215 said:
Out of curiosity, did you accidentally enable the signature verification in speedmod? I did that yesterday while installing Captivating and it'll throw the signature verification error lol. Just click it again in CWM and you should be able to get passed the signature verification.
Click to expand...
Click to collapse
there's no such option in my cwm. the cwm is 3e and very limited. it has only 4 option... reboot, update from zip, wipe factory data, wipe cache.
CWM and 3e recovery are 2 different things. CWM is a CUSTOM recovery, 3e is the stock recovery. It sounds like you're still on stock recovery.
Have you tried using ADB to push a CWM recovery.img to the device? There should be some tutorials or posts on other threads here about doing it. I had to do that for my Pantech Crossover.
Once you do that, you can flash a ROM no problem.
x0ne215 said:
... It sounds like you're still on stock recovery
Have you tried using ADB to push a CWM recovery.img to the device?....
Once you do that, you can flash a ROM no problem.
Click to expand...
Click to collapse
ok thanx, this ADB thing is sounds complicated to me. but I'll learn it.
bad news
ok... bad news.. phone is hard bricked... no download mode, no charging battery display when plugged to wall... this is going near to the end.
Time to build a jig. See the how to if you want to diy. There are a few you can buy online if you're lazy
Sent from my SGH-I897 using xda app-developers app
It's quicker and easier to just do it yourself, there's a no solder method on the forums here.
I'm trying
yes.. I'm following this 2 solderless threads jig without cutting usb cord and jig with cutting usb cord
but no luck yet, have to identify the problem. is there any suggestions about these methods or any other?
What problem? Only follow 1 of the guides, they're different, hence why there's 2.