Out of ideas, plz help - LG Optimus Black

| Did a hard reset/factory reset using SmartFlashTool and still no luck. The phone keeps powering off (as if you were pulling out the battery forcefully from the back) after booting for a min or so when plugged in. When on battery alone, the phone wont boot at all, it just flashes the LG logo for a few times and dies (like turning a lamp on and off). I'm running out of ideas :S

Did you drop it or did it get wet? Is the Download Mode screen being shown for a longer periode of time, or how were you able to use smartflash?

N00BY0815 said:
Did you drop it or did it get wet? Is the Download Mode screen being shown for a longer periode of time, or how were you able to use smartflash?
Click to expand...
Click to collapse
| Nope, Nope, Nope, I was able to use SmartFlash just fine. When plugged into a power source, the phone did a factory reset and I was able to boot into froyo for a minute or so, and then it dies (like when you're pulling the battery out forcefully).

Try the following:
Download any kdz file, download cwm injector (look into my noob how to post 3), inject cwm, flash it with smartflash, then you should be in CWM, do a data, cache and dalwik wipe, flash superuser.zip (should be on your SD card of course) and try to boot again. If it still doesnt boot, I have no idea, of what is wrong with your phone...

I think it's hardware related. A link betwen power supply and motherboard.

punktnet said:
I think it's hardware related. A link betwen power supply and motherboard.
Click to expand...
Click to collapse
I think it's a hardware problem too because smartflashing it to original rom still won't solve the problem. Guess I have to take it back to the store that I bought it from.

Try using it on USB alone with battery removed if its working normal, then it could be a faulty battery. If you can lend the same battery to test would be better than buying one then realizing thats not the problem but could be hardware problem.

Hmm, had u followed the correct steps about using smartflashtool?

Change the battery?
Sent from my LG-P970 using xda premium

Related

Wrong way to install the CWR. My phone has a solution?

I'm so embarrassed to post this, but there we go.
CWM installed following the tutorial for the P920 using the 3D ROM MANAGER (rooted by superoneclick). Apparently installed successfully, but when trying to install the mod's ROMs (King_3d, and ThiaiZ KINGDROID), all of them will not boot completely and then turn off your device as you pressed the power button.
Trying to see what could be wrong, I saw on the back label that my device it's a P925. I was stupid and not able to make the backup old ROM.
I just killed my phone or there is still way out of it?
PS: I tried to run this rom from here http://forum.xda-developers.com/showthread.php?t=1270832 but this also does not boot completely, and the device shutting down.
Maybe a problem with the CWR?
Ratzenberger said:
I'm so embarrassed to post this, but there we go.
CWM installed following the tutorial for the P920 using the 3D ROM MANAGER (rooted by superoneclick). Apparently installed successfully, but when trying to install the mod's ROMs (King_3d, and ThiaiZ KINGDROID), all of them will not boot completely and then turn off your device as you pressed the power button.
Trying to see what could be wrong, I saw on the back label that my device it's a P925. I was stupid and not able to make the backup old ROM.
I just killed my phone or there is still way out of it?
PS: I tried to run this rom from here http://forum.xda-developers.com/showthread.php?t=1270832 but this also does not boot completely, and the device shutting down.
Maybe a problem with the CWR?
Click to expand...
Click to collapse
Just follow these directions: http://forum.xda-developers.com/showthread.php?t=1257588
Sent from my LG-P925 using XDA App
CallMeAria said:
Just follow these directions: http://forum.xda-developers.com/showthread.php?t=1257588
Sent from my LG-P925 using XDA App
Click to expand...
Click to collapse
Thanks, but i have no system running on phone to do this. I´m stuck on CWR with no rom.
How much battery do you have left? You should be able to boot completely with O3D ROMs, and for sure with the stock Thrill ROM. Also, are you doing a data wipe before hand?
If you can get into recovery, which sounds like you can, no need to reflash the recovery. As well, a boot loop usually means failure to wipe properly or wrong kernel (but that doesn't apply here at all).
pjcforpres said:
How much battery do you have left? You should be able to boot completely with O3D ROMs, and for sure with the stock Thrill ROM. Also, are you doing a data wipe before hand?
If you can get into recovery, which sounds like you can, no need to reflash the recovery. As well, a boot loop usually means failure to wipe properly or wrong kernel (but that doesn't apply here at all).
Click to expand...
Click to collapse
Battery it´s full! All attempts i wape the cache , data & factory, and dalvik too.
Without success, the phone keeps Shutting Down after booting the ROM's. (I can see "reading sd card" on the top bar before shutting down screen.
Thank you in advance for the assistance.
Ratzenberger said:
Battery it´s full! All attempts i wape the cache , data & factory, and dalvik too.
Without success, the phone keeps Shutting Down after booting the ROM's. (I can see "reading sd card" on the top bar before shutting down screen.
Thank you in advance for the assistance.
Click to expand...
Click to collapse
Wait so you're actually able to boot into the operating system and then it just shuts off? Or does it reboot back to the boot screen? If its shutting off That sounds like something is wrong with the phone itself.
Try to redownload a fresh copy of the rom and push it to your SD card (check the md5 sums to be sure its right. If its not posted ask the dev to put it up). Boot into clockworkmod and go to mounts and storage. From there format /system /data and /cache. Now install the rom and reboot.
Sent from my LG-P925 using XDA App
CallMeAria said:
Wait so you're actually able to boot into the operating system and then it just shuts off? Or does it reboot back to the boot screen? If its shutting off That sounds like something is wrong with the phone itself.
Try to redownload a fresh copy of the rom and push it to your SD card (check the md5 sums to be sure its right. If its not posted ask the dev to put it up). Boot into clockworkmod and go to mounts and storage. From there format /system /data and /cache. Now install the rom and reboot.
Sent from my LG-P925 using XDA App
Click to expand...
Click to collapse
Thanks to help-me again
I followed exactly as you instructed. Now with the ROM ThiaiZ again without success. Booting ROM (Break Dancing Droid) and then Power off
Shutting Down Screen
Ratzenberger said:
Thanks to help-me again
I followed exactly as you instructed. Now with the ROM ThiaiZ again without success. Booting ROM (Break Dancing Droid) and then Power off
Shutting Down Screen
Click to expand...
Click to collapse
There's no reason for the phone to shut off like that. Even if you are getting bad rom flashes. Unless..
I gotta ask...is the battery charged? You can lose a lot of battery being in recovery and going through reboots. It could actually be that the battery is not charged or is defective. Try charging and/or replacing the battery.
Sent from my LG-P925 using XDA App
CallMeAria said:
There's no reason for the phone to shut off like that. Even if you are getting bad rom flashes. Unless..
I gotta ask...is the battery charged? You can lose a lot of battery being in recovery and going through reboots. It could actually be that the battery is not charged or is defective. Try charging and/or replacing the battery.
Sent from my LG-P925 using XDA App
Click to expand...
Click to collapse
I have good news! Or bad news too. I just decided to turn on the device with the USB cable plugged in and booted it as well. He is not holding battery charge, consisting as 0% of charged. I tested another battery from a friend and did the same thing. If I unplug the USB cable the device shutting off immediately. It may be a software problem or a hardware problem coincidentally?
Ratzenberger said:
I have good news! Or bad news too. I just decided to turn on the device with the USB cable plugged in and booted it as well. He is not holding battery charge, consisting as 0% of charged. I tested another battery from a friend and did the same thing. If I unplug the USB cable the device shutting off immediately. It may be a software problem or a hardware problem coincidentally?
Click to expand...
Click to collapse
Edit: it appears they're having the same problem over in the O3D forums. Try restoring the stock firmware and stock recovery. I would also try formatting all your partitions individually (you will lose data so backup first).
Sent from my LG-P925 using Tapatalk
DELETED.
Sent from my LG-P925 using Tapatalk
CallMeAria said:
Edit: it appears they're having the same problem over in the O3D forums. Try restoring the stock firmware and stock recovery. I would also try formatting all your partitions individually (you will lose data so backup first).
Sent from my LG-P925 using Tapatalk
Click to expand...
Click to collapse
I set my phone for Stock & Recovery firm, unrooted. Nothing doing! I give up, nobody knows how to solve this problem. I'm totally frustrated with it.

[Q] Help me pls.. I think I've really bricked my P990

Hi all kind bros and sis,
Please help me out as I think I've really bricked my less than 2 months brand new Optimus 2X..
You see.. I rooted my P990 using unlock root and chanced upon CM7 and thought of giving it a try. I installed clockworkmod and downloaded the stable release of 7.1 for Optimus 2x.. following the instruction to do a Nandroid backup and proceeded with the Mod..
Not knowing that I need to wipe everything including data.. I just selected the Dalvik cache wipe and proceed with the mod. The process went for more than 15mins and I saw some graphics (the android figure going round and round) but it just stuck there... the screen went blank and when I touched those home or back buttons.. they will lighted but nothing happens. I can't power it off also. So I manually took out the battery and put it back before powering up again. The android picture appeared again briefly for about 1 min and just hanged there. I took out the battery again and this time it was dead.. no matter what I press : vol + and power buttons together; home+Vol+ + power down; Vol- + power down.. all those do not revive the phone.
I tried taking out the external SD card and try powering up. The LG logo appeared and got stuck there.
I searched on Google and found the smartflashtool. I tried that and managed to install the NVidia boot recovery driver and stuff correct. Hold the vol+ button and power key before plugging in but the smarttool did not find the com port or communication driver whatever so I couldn't flash it back to stock.
I'm very desperate and stuck now... did I just accidentally burned the board or something? What bad luck I have
If that's the case, will I still be able to bring the phone back to LG service centre and get it repaired?
Please help me.. any kind souls out there. I really liked the phone and hoped to bring it back. else it's such a shortlived phone... really breaks my heart to see this..
Thanks in advance...
humblepie88 said:
Hi all kind bros and sis,
Please help me out as I think I've really bricked my less than 2 months brand new Optimus 2X..
You see.. I rooted my P990 using unlock root and chanced upon CM7 and thought of giving it a try. I installed clockworkmod and downloaded the stable release of 7.1 for Optimus 2x.. following the instruction to do a Nandroid backup and proceeded with the Mod..
Not knowing that I need to wipe everything including data.. I just selected the Dalvik cache wipe and proceed with the mod. The process went for more than 15mins and I saw some graphics (the android figure going round and round) but it just stuck there... the screen went blank and when I touched those home or back buttons.. they will lighted but nothing happens. I can't power it off also. So I manually took out the battery and put it back before powering up again. The android picture appeared again briefly for about 1 min and just hanged there. I took out the battery again and this time it was dead.. no matter what I press : vol + and power buttons together; home+Vol+ + power down; Vol- + power down.. all those do not revive the phone.
I tried taking out the external SD card and try powering up. The LG logo appeared and got stuck there.
I searched on Google and found the smartflashtool. I tried that and managed to install the NVidia boot recovery driver and stuff correct. Hold the vol+ button and power key before plugging in but the smarttool did not find the com port or communication driver whatever so I couldn't flash it back to stock.
I'm very desperate and stuck now... did I just accidentally burned the board or something? What bad luck I have
If that's the case, will I still be able to bring the phone back to LG service centre and get it repaired?
Please help me.. any kind souls out there. I really liked the phone and hoped to bring it back. else it's such a shortlived phone... really breaks my heart to see this..
Thanks in advance...
Click to expand...
Click to collapse
Try using SmartFlashTool, download the LG stock ROM (can be found here in XDA forum, i'll help you find the link), flash the .bin and .fls files.
humblepie88 said:
Please help me out as I think I've really bricked my less than 2 months brand new Optimus 2X..
...
"Hold the vol+ button and power key before plugging in but the smarttool did not find the com port..."
Click to expand...
Click to collapse
Turn off the phone. Hold Vol-DOWN while plugging it in. Start Smartflash and see the com-ports magically appear.
Follow trymhansen's instructions. He helped me before with my softbricked phone.
I hope you get your O2X back to life! Keep us posted
Best of luck to you!
PS. I also believe you should pull out the battery after turning off the phone in Trym's instructions. Trym correct me if I'm wrong please.
Hi All,
Thanks for your kind replies. I did follow your instruction. Take out the battery (I removed the ext SDcard as well), press and hold -vol and plug in the phone via USB. Afterwhich start up smartflash tool.. still nothing happens and no com ports are found.. The version of smartflashtool that I used is Dec 2010. Do I need to get the latest one and also the LG united drivers installed?
I also tried starting smartflash tool before the sequence.. still the same. BTW.. my OS is Win 7. Is it supported?
Really at my end's wit. Hope I can bring my phone back to life soon and I'm not really bricking it. I heard Samsung phones are not that easy to brick and can get to the recovery mode pretty easily. is it true?
Please help me.. thanks
Hi bros,
Attached are my screenshots from the device manager and smartflash tool... both seems not able to find the phone and allocate a com port. I've tried installing the latest LG mobile driver 3.6 but no help as well
Have you followed instructions as described here http://forum.xda-developers.com/showthread.php?t=1008070 ?
Also, try to attach your phone directly to computer, using usb ports from computer mainboard. I have experienced problems when attaching it via extension usb cord or attaching it to computer case ports. (I hope that you can understand what I have mean to say with usb )
Hi Memhis,
Yes.. I followed exactly the instructions from the thread and I've plugged into a USB port directly to the computer which is one of the ports in front.. not via any extension or USB hub.. still it did not detect.
I'll try to use another computer which is running Win XP and try again. I've downloaded those 3 files from that thread you recommended try using those instead.. hope it can be detected this time else I think I'll have to send to LG service for repair tomorrow.
I've been jailbreaking and modding my Iphone a lot and everytime whenever there's a near brick situation.. I'm able to fix it but not this time with an Android or LG perhaps... I hope I don't have to go to the extend of using ADB low level to push some files which I saw in one of the thread that one of the guys did that.. but I doubt I can since my windows can't even detect the phone!!
Maybe this will be my first and last LG phone if I ever get it repaired...
humblepie88 said:
Hi Memhis,
Yes.. I followed exactly the instructions from the thread and I've plugged into a USB port directly to the computer which is one of the ports in front.. not via any extension or USB hub.. still it did not detect.
I'll try to use another computer which is running Win XP and try again. I've downloaded those 3 files from that thread you recommended try using those instead.. hope it can be detected this time else I think I'll have to send to LG service for repair tomorrow.
I've been jailbreaking and modding my Iphone a lot and everytime whenever there's a near brick situation.. I'm able to fix it but not this time with an Android or LG perhaps... I hope I don't have to go to the extend of using ADB low level to push some files which I saw in one of the thread that one of the guys did that.. but I doubt I can since my windows can't even detect the phone!!
Maybe this will be my first and last LG phone if I ever get it repaired...
Click to expand...
Click to collapse
launch smartflashtool first, extract the .fls and .bin files, hold down volume at the same time plug in the usb port to your comp. you must see a s/w updating logo in your phone's screen and smartflash should detect your phone. then click start!
Sent using a phone.
Hi mrgian,
I just tried to revive my phone by using the same method on a different laptop running on Win XP.. plugged directly to a side USB port but still no luck. There's no s/w updating logo appearing on my phone and smartflashtool also failed to detect my phone. I've found another thread opened by another user and my situation is exactly the same as his :
http://forum.xda-developers.com/showthread.php?t=1161583
But lucky for him is that he's able to get it working after changing to another PC but I've tried 3 different machines and no luck so far...
I'll try to use the NVflash as a last resort and see if I've any luck with NVflash at all.. If it failed again.. I think I've no choice but to send it to the repair centre for servicing then..
humblepie88 said:
Hi mrgian,
I just tried to revive my phone by using the same method on a different laptop running on Win XP.. plugged directly to a side USB port but still no luck. There's no s/w updating logo appearing on my phone and smartflashtool also failed to detect my phone. I've found another thread opened by another user and my situation is exactly the same as his :
http://forum.xda-developers.com/showthread.php?t=1161583
But lucky for him is that he's able to get it working after changing to another PC but I've tried 3 different machines and no luck so far...
I'll try to use the NVflash as a last resort and see if I've any luck with NVflash at all.. If it failed again.. I think I've no choice but to send it to the repair centre for servicing then..
Click to expand...
Click to collapse
does the laptop have lg drivers installed?
Sent using a phone.
inflance hotota
mrgian said:
does the laptop have lg drivers installed?
Sent using a phone.
Click to expand...
Click to collapse
Yes.. I've installed the latest LG united mobile driver version 3.6. Any wrong with that version... Really don't know where / what is missing or my phone is really fried after just one mod attempt?
I've also tried NVflash and it's stuck at the "bootloader initialization" screen....
Nothing appeared on the phone... not even LG logo. Can't believe LG phones are so fragile and unmodifiable
humblepie88 said:
Yes.. I've installed the latest LG united mobile driver version 3.6. Any wrong with that version... Really don't know where / what is missing or my phone is really fried after just one mod attempt?
I've also tried NVflash and it's stuck at the "bootloader initialization" screen....
Nothing appeared on the phone... not even LG logo. Can't believe LG phones are so fragile and unmodifiable
Click to expand...
Click to collapse
can you entet CWM? Press volume down til s/w will appear.
Sent using a phone.
try to charge the battery first...power off your device and charge it...maybe leave it charging for about 1hr even if you dont see anything on the screen( i believe after plugin the charger you will see the charging logo but it will disapear after a few seconds)...after 1 hr unplug and try to check if it will boot to clockwork recovery...if yes then just do complete data wipe...also try installing the ext3 back.zip, it will help delete system files(sometimes CWR is not deleting this)...hope this help
chupi_24 said:
try to charge the battery first...power off your device and charge it...maybe leave it charging for about 1hr even if you dont see anything on the screen( i believe after plugin the charger you will see the charging logo but it will disapear after a few seconds)...after 1 hr unplug and try to check if it will boot to clockwork recovery...if yes then just do complete data wipe...also try installing the ext3 back.zip, it will help delete system files(sometimes CWR is not deleting this)...hope this help
Click to expand...
Click to collapse
you got a point there.
Sent using a phone.
humblepie88 said:
Yes.. I followed exactly the instructions from the thread and I've plugged into a USB port directly to the computer which is one of the ports in front.. not via any extension or USB hub.. still it did not detect.
Click to expand...
Click to collapse
When you say an USB port in the front do you mean an USB in the back? Because the ones in front are the case ones, the ones in the back are the good ones, i.e. the ones that are directly attached to the mobo.
LarsPT said:
When you say an USB port in the front do you mean an USB in the back? Because the ones in front are the case ones, the ones in the back are the good ones, i.e. the ones that are directly attached to the mobo.
Click to expand...
Click to collapse
I've tried the recovery via 2 diff laptops and plugging in directly to one of the side USB ports but to no avail as well.. I think I've plugged in the phone correctly but there's no reaction at all/
mrgian said:
can you entet CWM? Press volume down til s/w will appear.
Sent using a phone.
Click to expand...
Click to collapse
How to enter CWM? I can't even power up the phone and no reaction at all when plugged into USB via smartflash.. the screen remains black. It's liked the whole phone is burned or something... but strange thing is that it can detect APX and asked to install drivers... but after successfully installing the Nvidia boot recovery driver.. the com ports does not get discovered.. What is wrong?
chupi_24 said:
try to charge the battery first...power off your device and charge it...maybe leave it charging for about 1hr even if you dont see anything on the screen( i believe after plugin the charger you will see the charging logo but it will disapear after a few seconds)...after 1 hr unplug and try to check if it will boot to clockwork recovery...if yes then just do complete data wipe...also try installing the ext3 back.zip, it will help delete system files(sometimes CWR is not deleting this)...hope this help
Click to expand...
Click to collapse
I plugged in the phone with battery but there was no charge logo or whatever.. the screen remains blank.. I'll try to leave it charging and see what happens. But I've remembered there was still about 80% power when this disaster happened and I've taken out the battery since.. so the charge should have remain? Btw.. where can I get this ext3 back.zip and how to use it? thanks

[Q] Stuck at a Boot loop and cant enter recovery

Guys I am stuck at a Boot loop.... When I turn on my O2x it gust gets stuck at the LG Logo and does nothing.... I have tried removing the battery and then vol down + Power but still cant enter recovery.... Feel like I am in deep trouble.... If possible Plz send me a link from where I can get instructions to undo what I have done.....
I was on Nova HD..... was trying to flash to hellfire.... and the rest is history....
Rishik17 said:
Guys I am stuck at a Boot loop.... When I turn on my O2x it gust gets stuck at the LG Logo and does nothing.... I have tried removing the battery and then vol down + Power but still cant enter recovery.... Feel like I am in deep trouble.... If possible Plz send me a link from where I can get instructions to undo what I have done.....
I was on Nova HD..... was trying to flash to hellfire.... and the rest is history....
Click to expand...
Click to collapse
You have to try the software smartflash, with that you will return to the stock rom! Are you sure that you can not get into Recovery? In recovery you enter by pressing the power button and volume -!!
i have this, it keeps going LG. off on LG. off on?
just take out battery. put battery in. while pressing POWER + VOL DOWN.
it will boot into CWM. well should. Only way i got out of it. or i would have rage thrown fone at wall.
I have done that but doesnt help..... I did install smart flash and it says flash successfull but still gets stuck at LG Logo..... This is some weard ****.... plz help
R0B3RTF1SH3R said:
i have this, it keeps going LG. off on LG. off on?
just take out battery. put battery in. while pressing POWER + VOL DOWN.
it will boot into CWM. well should. Only way i got out of it. or i would have rage thrown fone at wall.
Click to expand...
Click to collapse
i had another problem ontop of this. (bad baseband and ril) meaning the battery was like charging then saying 98% then saying 3% then no wifi no sdcard(ext) etc. i was like NOOOOOOOOOOO... battery draining super fast. phone heating up. then i emergency try to re flash. (have no access to put files on sd card) re flashed the only zip on the sd card (lucky cm9) which has aroma launcher, enable me to do a FULL WIPE. then once into CM9 (after it freezes on boot screen (animation) for like 2 minutes. furioiusly pressing buttons wondering if batt is going flat, get into menu. hold power force reboot into recovery mode. (sometimes its really annoying to get into recovery cause hold to long reset/reload no recovery. sometimes easier to hold power in boot into recovery via PHONE CM9 loaded.
i figured out it was the kernel was making my baseband read as UNKNOWN even tho it could tell me the version. ha. only fix was to do a full wipe.
the problem you probably have is. NO WAY TO PUT ANY OTHER ROM/STOCK onto SD CARD cause you have no other device with USB MASS STORAGE SD CARD???
if you can do that, then your ok.
if you cant then you need to go into cwm.
do a restore. if you have a backup. if the backup is ext3 and you have used ex4 roms like CM7/9 then the recovery will fail. and you will still be bad...
try doing in CWM recovery (full wipe/reset/cache/dav etc) ? silly question im sure you would have tried everything.
hmm. the only solution is to get another ROM (ext4) unless u can get backtoext3.zip.
you need the files on the SD CARD.. then you should be ok . right?
Try booting into recovery and wiping the dalvik cache and the other caches maybe?
Sent from my LG-P999 using XDA
And also, what rom are you trying to flash? Make sure you have the right one for your phone! you can also try out other roms that may make the flashing go more smoothly
Sent from my LG-P999 using XDA
Thanks a lot guys for your help..... I read a fiorum from RUSTY http://forum.xda-developers.com/showthread.php?t=1229407
I did the same One cllick on the batch file and wallah my phone was alive again.....
Tomtomyoshi said:
And also, what rom are you trying to flash? Make sure you have the right one for your phone! you can also try out other roms that may make the flashing go more smoothly
Sent from my LG-P999 using XDA
Click to expand...
Click to collapse

Bricked Note

I have been searching for a solution, but haven't found any..
I flashed to kingdroid rom a while ago from stock GB with abyss kernel. Everything went fine, and later wanted to try a new rom.
So I wiped the data and factory reset in CWM and tried to restore the old stock GB. I don't know if anything went wrong in that process, but now I can't even turn on the phone? I can't boot up CWM either?
fruddy said:
I have been searching for a solution, but haven't found any..
I flashed to kingdroid rom a while ago from stock GB with abyss kernel. Everything went fine, and later wanted to try a new rom.
So I wiped the data and factory reset in CWM and tried to restore the old stock GB. I don't know if anything went wrong in that process, but now I can't even turn on the phone? I can't boot up CWM either?
Click to expand...
Click to collapse
Can you enter download mode??If so flash any GB rom.If the flash is getting stuck at factoryfs or somewhere for long than 15 mins..you have superbricked your phone by doing a wipe.Only way is to replace the mobo or trying this
yeah go on download mode. Use odin pc. It will raise the counter, but its much better than a brick note.. Hehe
Download mode is volume down, home key and turn on key right?
Doesnt work.. how long is I supposed to hold it in?
And what is a MOBO?
Easy ... Don't Panic
fruddy said:
I have been searching for a solution, but haven't found any..
I flashed to kingdroid rom a while ago from stock GB with abyss kernel. Everything went fine, and later wanted to try a new rom.
So I wiped the data and factory reset in CWM and tried to restore the old stock GB. I don't know if anything went wrong in that process, but now I can't even turn on the phone? I can't boot up CWM either?
Click to expand...
Click to collapse
The First Thing you did was right, since you did the wipe using the AbyssKernel kernel, witch was safe and away from the HardBrick Thing around the Stock ICS Kernel.
But what you did wrong, is that you did wipe and restore using the Kernel inside the rom you used, wich of course was in cause !!!! so Here is what you will do, just Follow the Steps in My following Post, and you are done
http://forum.xda-developers.com/showpost.php?p=26772618&postcount=12
IF this Helped, Then you Know what to do
Glad to hear kimifender!
Sorry for not being that bright in all this.. But how can I do all the instructions when I can't turn the phone on? I can't find the sdcards on my computer either when i connect the phone to the computer
Sounds like you have a big paperweight. You need to somehow get it to a Samsung repair center to get the motherboard replaced. There's a thread in the General section that MIGHT help revive it, but no guarantees.
Always make sure you read, read, read before you flash anything. Like other people said, the restore is what bricked it.
kimifender said:
The First Thing you did was right, since you did the wipe using the AbyssKernel kernel, witch was safe and away from the HardBrick Thing around the Stock ICS Kernel.
But what you did wrong, is that you did wipe and restore using the Kernel inside the rom you used, wich of course was in cause !!!! so Here is what you will do, just Follow the Steps in My following Post, and you are done
http://forum.xda-developers.com/showpost.php?p=26772618&postcount=12
IF this Helped, Then you Know what to do
Click to expand...
Click to collapse
He said he wiped after beeing on the other rom. So he wiped with an unsafe kernel.
=> Superbrick.
So there is no way I can revive my phone?
Maybe im just not turning it on the right way?
fruddy said:
So there is no way I can revive my phone?
Maybe im just not turning it on the right way?
Click to expand...
Click to collapse
If you're pushing the power button, you are turning it on. If you are holding down volume up/down + power + home button you are trying to put it in download/recovery.
Sorry, but it sounds like it is a paperweight/brick.
fruddy said:
So there is no way I can revive my phone?
Maybe im just not turning it on the right way?
Click to expand...
Click to collapse
Check battery. make sure it still has power. Pull out and leave out 5 minutes and replace it back as well.
Then turn it on and try to enter download mode (Home volume-down and power) and connect it to PC odin (even in case the screen does not turn on) and see the yellow box is there. If there is, you can flash kernel that has CWM as well, and there is hope to revive it.
If you cannot get odin to see it, then SS service is the only way.
fruddy said:
So there is no way I can revive my phone?
Maybe im just not turning it on the right way?
Click to expand...
Click to collapse
Well Of course, If your phone is not ON, it won't show any usb storage on the PC.
Don't Give up Yet !!!
Are you sure your phone has enough battery charge,
Not Sure? well Do this :
- Keep your phone under AC Battery Charger (no USB charging) for at least 45 min.
- Take Off the Battery for at least 10s seconde,
put it back, Then try to to enter to download mode directly : Vol down + Power + Home Button at the same time untill you see the Yellow Dowload Logo, Don't Try to turn your phone on by Pressing the power Button as Normally, It Simply won't turn on !!
Keep taking the Battery Off and Back untill it works, believe me this happened before.
How much would it cost to get it fixed?
How much would a new motherboard cost?
fruddy said:
How much would it cost to get it fixed?
How much would a new motherboard cost?
Click to expand...
Click to collapse
Try My Post First untill it works, Believe it or not !!!!!
I really doubt that will work if he has a superbrick. If it does it would be amazing.
But how can i flash, when I can't even turn on the phone?
fruddy said:
But how can i flash, when I can't even turn on the phone?
Click to expand...
Click to collapse
Try what I told you in Post N°12,
If you get the chance to get into the download mode : then Follow My Post N°5.
You Have to Make sure your phone is really Dead, or just need a push to wake up again.
I swear this happened to me before, and believe me I'm no noob.
Just Try First. If it doesn't work, then Buy another one ;;;;
how i fixed it
Iám new as a member here but not new on reading here on this forum.
Want to post fast how i brickt my phone with ics and kernel problems and wipe going wrong.
Cwm still working but nothing is going anymore.
In cwm flash a franco kernel (i used Franco kernel 10 because had it on my sd card) then reboot into recovery and flash the Abys kernel.
Reboot into recovery and install your rom or restore an backup you made.
I hope sthis works for all.
annoniem said:
Iám new as a member here but not new on reading here on this forum.
Want to post fast how i brickt my phone with ics and kernel problems and wipe going wrong.
Cwm still working but nothing is going anymore.
In cwm flash a franco kernel (i used Franco kernel 10 because had it on my sd card) then reboot into recovery and flash the Abys kernel.
Reboot into recovery and install your rom or restore an backup you made.
I hope sthis works for all.
Click to expand...
Click to collapse
Reaaaaaaad,
He can not wake his phone up, or turn it on !!!
So How would he install any Franco or what ever ...... !!!!!!!!
bricked Note
kimifender said:
Reaaaaaaad,
He can not wake his phone up, or turn it on !!!
So How would he install any Franco or what ever ...... !!!!!!!!
Click to expand...
Click to collapse
You tell him lol, i love how he wrote "Im new as a member here but not new on reading here on this forum"

[Q] problem after doing wipe cache partition on cwm

Ok, so my phone is rooted and i was going through the steps before applying they cyanogen mod 10 nighly.
In cwm i had:
- Created a back up
- Wiped data / factory reset
- Wiped cache partition (it took a wil then the screen went black as if it had reset)
And now i am unable to power 'on' the device?
Any ideas
hal9000 said:
And now i am unable to power of the device?
Click to expand...
Click to collapse
Do you mean you cant power the device ON ?
What happens when you connect usb cable ? Does anything light up, Does your computer 'beep' to notify you of a connected device ?
Have you took battery out and reinserted ? or just left it to charge for around 10 mins before trying to power on ?
Also, What ROM + Kernel were you on before you did the wipes in recovery ?
Ahh yes, in my panic i miss typed.
O cant power on i have tried taking the battery out etc. but with no luck.
I just plugged it into my laptop pc and not a thing
I was on stock ICS (uk) and i don't think i changed the kernel either
I had just rooted and did the super user thing
I also probably didnt fully install CMW as i ran the CWM.zip from external sd from recovery each time.
azzledazzle said:
Do you mean you cant power the device ON ?
What happens when you connect usb cable ? Does anything light up, Does your computer 'beep' to notify you of a connected device ?
Have you took battery out and reinserted ? or just left it to charge for around 10 mins before trying to power on ?
Also, What ROM + Kernel were you on before you did the wipes in recovery ?
Click to expand...
Click to collapse
If you are on stock kernal that implies you are prone to emmc bug, you shouldnt do wipes on stock kernal
Sent from my GT-N7000 using xda premium
You can Revive your phone with a pit file like me. I bricked mine with the same way as you. Check this: http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
Thanks but I don't know if that will work as i can't get the phone to power on (as far as i can tell) and it doesn't seem to do anything when i plug it into the laptop.
No ping no beep.
It had about 60% power left when i did it so it has juice.
I am thinking might have to take it to carphonewhorehouse and tell them i was just doing a factory reset cos it had slowed down with all the apps and it reset while doing it and now won't turn on?
KvnTM said:
You can Revive your phone with a pit file like me. I bricked mine with the same way as you. Check this: http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
Click to expand...
Click to collapse
in this ERA of auto-root kernels, people still using CWM.zip...
probably should have just read some stickies. but too late...
if there is no response from the device, the pits are not going to work. only way is to get a replacement motherboard under warranty,
and as the device is non responsive.. they will not be able to detect anything about root.
Good Luck
Yeah i did some reading, but clearly not in the right place
back to the shop it goes. If you have a guide that you could point me to to get this doen the correct way then that would be much appreciated (if and whn i get a working replacement)
Thanks
nokiamodeln91 said:
in this ERA of auto-root kernels, people still using CWM.zip...
probably should have just read some stickies. but too late...
if there is no response from the device, the pits are not going to work. only way is to get a replacement motherboard under warranty,
and as the device is non responsive.. they will not be able to detect anything about root.
Good Luck
Click to expand...
Click to collapse
when you get the phone check what rom its on. just update to the latest ICS rom..(donot wipe).
download philz kernel for the rom you have updated to.
put it in the sd card
boot into recovery
and apply update from ext storage.> point to the kernel > install
thats it. your phone gets rooted, safe kernel and CWM inbuilt.
now you can follow the procedure in the CM10 rom to install. (The Safe Way)
Thanks!
I have just got back from CPW where the nice lady said that it looks like a hardware fault given what i had described so she is sending it off to be either mobo replaced o plain replaced.
I have emailed myself your guide and will look into it if and when i get it back.
Thanks !
nokiamodeln91 said:
when you get the phone check what rom its on. just update to the latest ICS rom..(donot wipe).
download philz kernel for the rom you have updated to.
put it in the sd card
boot into recovery
and apply update from ext storage.> point to the kernel > install
thats it. your phone gets rooted, safe kernel and CWM inbuilt.
now you can follow the procedure in the CM10 rom to install. (The Safe Way)
Click to expand...
Click to collapse
see you soon with your new phone mate
annoyingly it will only be a couple of months till my contract is up, at which point i will buy outright a new galaxy note 2 and stick a giffgaff sim in it.
nokiamodeln91 said:
see you soon with your new phone mate
Click to expand...
Click to collapse
Goodluck to you my friend

Categories

Resources