Database Develop

Stopping NlpWakeLock, NlpWakeLockCollector and RILJ

I have been trying on and off for over a year to eliminate these horrible wakelocks without disabling location services all together, and have finally found a solution.
I have tried wakelock terminator, amplify, and various other tweaks without the results I was looking for. I could only stop them by disabling location completely. Even with GPS only enabled the phone will eventually want to find its location and then if you're in a building where there is no GPS single, it will kill your battery trying to find one. So I finally stumbled across SlimLP which is an AOSP rom that has app ops baked into it. I found that if I simply modify the permissions of google play services and not allow it to use location, and also disable its ability to hold a wakelock, the nlp wakelocks (both) are gone forever. However, as soon as nlp is gone, the phone falls back to its backup plan which is RILJ to locate itself. So I then went into the phone apps permissions and disabled location and wakelock for it too. FINALLY these wakelocks are gone forever. My phone now loses 3% over 8 hours without disabling location services. There are literally 10 or less wakelocks system wide over 8 hours while I sleep, which is a huge contrast to the waking once every 25 seconds to check my location (or whatever absurd rate it was doing it). The only thing I can spot thats out of place it that google play services is registering a ton of alarms for location related stuff in better battery stats. I'm happy with this so far but feel it could be even better once I learn more.
What I really want to do is to be able to apply this to any android phone, such as my girlfriends z3. Unfortunately I can only get this to work with AOSP roms that have app ops built into them. I tried adding app ops to google based roms and even aosp roms and it doesnt work the same. If anyone could tell me what is different about roms with app ops built in, that would be great. I think we should look into this more to learn as much as possible because this affects everyone with an android phone. Thanks for reading.

seh6183 said:
I have been trying on and off for over a year to eliminate these horrible wakelocks without disabling location services all together, and have finally found a solution.
I have tried wakelock terminator, amplify, and various other tweaks without the results I was looking for. I could only stop them by disabling location completely. Even with GPS only enabled the phone will eventually want to find its location and then if you're in a building where there is no GPS single, it will kill your battery trying to find one. So I finally stumbled across SlimLP which is an AOSP rom that has app ops baked into it. I found that if I simply modify the permissions of google play services and not allow it to use location, and also disable its ability to hold a wakelock, the nlp wakelocks (both) are gone forever. However, as soon as nlp is gone, the phone falls back to its backup plan which is RILJ to locate itself. So I then went into the phone apps permissions and disabled location and wakelock for it too. FINALLY these wakelocks are gone forever. My phone now loses 3% over 8 hours without disabling location services. There are literally 10 or less wakelocks system wide over 8 hours while I sleep, which is a huge contrast to the waking once every 25 seconds to check my location (or whatever absurd rate it was doing it). The only thing I can spot thats out of place it that google play services is registering a ton of alarms for location related stuff in better battery stats. I'm happy with this so far but feel it could be even better once I learn more.
What I really want to do is to be able to apply this to any android phone, such as my girlfriends z3. Unfortunately I can only get this to work with AOSP roms that have app ops built into them. I tried adding app ops to google based roms and even aosp roms and it doesnt work the same. If anyone could tell me what is different about roms with app ops built in, that would be great. I think we should look into this more to learn as much as possible because this affects everyone with an android phone. Thanks for reading.
Click to expand...
Click to collapse
Wrong section...you might want to try Xposed and Amplify.
EDIT: I just realized I posted wrong section. For some reason, I thought this was Android Dev. Sorry

niral7 said:
Wrong section...you might want to try Xposed and Amplify.
EDIT: I just realized I posted wrong section. For some reason, I thought this was Android Dev. Sorry
Click to expand...
Click to collapse
I've tried amplify as stated in the op. I'm surprised more people aren't bothered by wakelocks. I can't stand them.

seh6183 said:
I've tried amplify as stated in the op. I'm surprised more people aren't bothered by wakelocks. I can't stand them.
Click to expand...
Click to collapse
They're necessary to some degree. Google Now and other location-based/sync programs need them to work. They just get annoying when they're fired up every minute.

niral7 said:
They're necessary to some degree. Google Now and other location-based/sync programs need them to work. They just get annoying when they're fired up every minute.
Click to expand...
Click to collapse
Well I've disabled the wakelocks and every location service including google now still functions as normal. The only benefit is me gaining 50% of my battery back. I just need to figure out what is so special about AOSP ROMs that have app ops baked in so I can apply these techniques to other phones.

So the App Ops Xposed module doesn't work the same way?

hayzooos said:
So the App Ops Xposed module doesn't work the same way?
Click to expand...
Click to collapse
It works exactly the same except for some odd reason the wakelocks won't stop when you start disabling google play services and phone. It will disable other things without any problems. I'm thinking that maybe SlimLp has a different google play services app with different permissions or something. I'm not exactly sure what it is yet but I'm still looking into it on a daily basis. All I know is that 9000 wakelocks at the end of the day from google play services is UNACCEPTABLE and pisses me off. So I set out to find a way to stop them.

seh6183 said:
It works exactly the same except for some odd reason the wakelocks won't stop when you start disabling google play services and phone. It will disable other things without any problems. I'm thinking that maybe SlimLp has a different google play services app with different permissions or something. I'm not exactly sure what it is yet but I'm still looking into it on a daily basis. All I know is that 9000 wakelocks at the end of the day from google play services is UNACCEPTABLE and pisses me off. So I set out to find a way to stop them.
Click to expand...
Click to collapse
Glad you found a way to stop them and more so you decided to post your way to stop them here.

seh6183 said:
It works exactly the same except for some odd reason the wakelocks won't stop when you start disabling google play services and phone. It will disable other things without any problems. I'm thinking that maybe SlimLp has a different google play services app with different permissions or something. I'm not exactly sure what it is yet but I'm still looking into it on a daily basis. All I know is that 9000 wakelocks at the end of the day from google play services is UNACCEPTABLE and pisses me off. So I set out to find a way to stop them.
Click to expand...
Click to collapse
Cataclysm Rom also has a App Ops. So I assume i can get same improvements as you do?
Or am I wrong and thinking the opposite direction?

Zwambo said:
Cataclysm Rom also has a App Ops. So I assume i can get same improvements as you do?
Or am I wrong and thinking the opposite direction?
Click to expand...
Click to collapse
It should work yes. Go into google play services from apps, its in settings, then click modify, then disable location and wake lock. Do the same for phone. There are two phone apps and a dialer making it confusing. You'll want to disable the location and wakelock setting on the phone app which has the location toggle. The other phone app doesn't have a location toggle and you'll know that's not the right one.
After doing this, if you monitor with wake lock detector, you'll see that both NLP wakelocks are stopped completely instead of the 1000 an hour like usual. Same goes for RILJ. Google play services is still generating thousands of alarms each day for location related stuff and I have found a way to fix that as well but it needs more testing.
To put it simply, when my phone goes to sleep, that exactly what I want it to do, not appear as if its asleep and constantly check my location so that it can better offer me ads and places of interest near by.

Doesn't the Phone app NEED to be able to keep the phone awake, so that it doesn't go to sleep mid-call?

setspeed said:
Doesn't the Phone app NEED to be able to keep the phone awake, so that it doesn't go to sleep mid-call?
Click to expand...
Click to collapse
It has no effect on the function of the phone at all except to eliminate the RILJ wakelock. I'm pretty sure this wakelock is the phones radio trying to triangulate your position using cell towers but not sure.

All solutions I've seen or heard about untill now are just workarounds, and I found an elegant solution that allows geoloc to be on all the time.
I detailed it in a battery thread because of the savings it can offer : it consist of an app that replaces nlp with a local db : http://forum.xda-developers.com/showthread.php?p=59184505
I didn't try out with all google goeloc services but maps didn't seem to bother...

Gentaz said:
All solutions I've seen or heard about untill now are just workarounds, and I found an elegant solution that allows geoloc to be on all the time.
I detailed it in a battery thread because of the savings it can offer : it consist of an app that replaces nlp with a local db : http://forum.xda-developers.com/showthread.php?p=59184505
I didn't try out with all google goeloc services but maps didn't seem to bother...
Click to expand...
Click to collapse
My solution has zero impact on location services as well. You're saying that your method totally stops NLP wakelocks and if you were to open maps, it would lock your location precisely?

seh6183 said:
It should work yes. Go into google play services from apps, its in settings, then click modify, then disable location and wake lock. Do the same for phone. There are two phone apps and a dialer making it confusing. You'll want to disable the location and wakelock setting on the phone app which has the location toggle. The other phone app doesn't have a location toggle and you'll know that's not the right one.
After doing this, if you monitor with wake lock detector, you'll see that both NLP wakelocks are stopped completely instead of the 1000 an hour like usual. Same goes for RILJ. Google play services is still generating thousands of alarms each day for location related stuff and I have found a way to fix that as well but it needs more testing.
To put it simply, when my phone goes to sleep, that exactly what I want it to do, not appear as if its asleep and constantly check my location so that it can better offer me ads and places of interest near by.
Click to expand...
Click to collapse
Thx a million!
Will look in to those settings from the phone apps and google play services. Love it when the app ops is included in the ROM!

seh6183 said:
My solution has zero impact on location services as well. You're saying that your method totally stops NLP wakelocks and if you were to open maps, it would lock your location precisely?
Click to expand...
Click to collapse
The fact that the gapps have a mind of their own is not big news, but alternatives exists to avoid dealing with them☺
I didn't say it will stop any wakelock (and I don't want to) : on the contrary, it consist of replacing the stock nlp with a more evolved one that allows to switch to a local db which is far less battery consuming for several reasons.
I didn't say it was "gps precise" either : it will locate you at the nearest antenna if you try a gps app like maps (did you actually read my link ?). Most of the time it has between 500m and 1500m (about a mile) uncertainty reported by the apps.
It just provides precise enough geoloc services for 95% of the apps you're using, even with your screen off like weather, loc. based profile mangers, local news, traffic, job/dating app or whatever... Granted : it won't compete with gps for you navigation or atronomy app but that's the 5% left when you'll switch the gps on ?
There should be a reason why you have so much wakelocks that does not involve blocking calls from a middleware as an answer.

Gentaz said:
The fact that the gapps have a mind of their own is not big news, but alternatives exists to avoid dealing with them
I didn't say it will stop any wakelock (and I don't want to) : on the contrary, it consist of replacing the stock nlp with a more evolved one that allows to switch to a local db which is far less battery consuming for several reasons.
I didn't say it was "gps precise" either : it will locate you at the nearest antenna if you try a gps app like maps (did you actually read my link ?). Most of the time it has between 500m and 1500m (about a mile) uncertainty reported by the apps.
It just provides precise enough geoloc services for 95% of the apps you're using, even with your screen off like weather, loc. based profile mangers, local news, traffic, job/dating app or whatever... Granted : it won't compete with gps for you navigation or atronomy app but that's the 5% left when you'll switch the gps on
There should be a reason why you have so much wakelocks that does not involve blocking calls from a middleware as an answer.
Click to expand...
Click to collapse
If its crippling the phones ability to locate itself accurately then I am not interested as occasionally navigation is important to me. Also of it doesn't stop wakelocks then I am certainly not interested. The way that you word things makes it very difficult to get your point across I might add. I had a hard time following your post.

What I did to get zero battery drain with GPS set on high accuracy:
- Download Disable Service from Google Play: https://play.google.com/store/apps/details?id=cn.wq.disableservice&hl=nl
- Go to System, then Google Play Services and disable everything that has something to do with 'Wear' and 'Fitness' since I don't use any of these features (for me these gave me wakelocks, but I'm not sure if this is the case for everyone), so: BrokeredFitnessService, WearableControlService, WearableService and WearableSyncService.
- Download LBE Security Master (http://forum.xda-developers.com/showthread.php?t=1422479) for its permission manager.
- Disable any location permission of all your apps that you don't want to use GPS (and other permissions to save more battery, but that's another topic).
I have to say I have Google Now disabled, and of course my phone is rooted to be able to use these apps. I run stock rom with stock kernel, and my battery is great with GPS enabled constantly.

seh6183 said:
If its crippling the phones ability to locate itself accurately then I am not interested as occasionally navigation is important to me. Also of it doesn't stop wakelocks then I am certainly not interested. The way that you word things makes it very difficult to get your point across I might add. I had a hard time following your post.
Click to expand...
Click to collapse
I guess you missinterpreted what I said : just enable gps when you need navigation... Gsm based location accuracy is ok for all the rest.
- wakelock issues either came from the way the phone is set up or an uncommon situation causing this (bug, bloat, bad network or gps reception...) : blocking them is not a solution, it's a workaround and, if I undestood you correctly, is only valid for some cases and is fastidious/maintenance intensive. There are already many nexus 5 and other threads dealing with those issues anyway and It would be easier to just disable geoloc when screen is off.
- I suggested a solution less battery draining for 95% of goeloc based needs and is valid for most android phones and roms as long as you have root, not yet another a nlp/wakelock blocking "trick".
It's ok if your girlfriend doesn't mind having her z3 flashed with an ASOP ops enabled rom and learn to block the wakelocks of the new apps she installs, but I prefer not having to explain mine what a wakelock is ☺
- It doesnt cripple your phone at all, it extends its possibilities by adding a gsm based backend to the location provider : your phone was already doing the same except it had to go to a google hosted database to match your location to your antenna or ip when it is set to use network based location.

Gentaz said:
I guess you missinterpreted what I said : just enable gps when you need navigation... Gsm based location accuracy is ok for the all the rest.
- wakelock issues either came from the way the phone is set up or an uncommon situation causing this (bug, bloat, bad network or gps reception...) : blocking them is not a solution, it's a workaround and, if I undestood you correctly, is only valid for some cases and is fastidious/maintenance intensive. There are already many nexus 5 and other threads dealing with those issues anyway and It would be easier to just disable geoloc when screen is off.
- I suggested a solution less battery draining for 95% of goeloc based needs and is valid for most android phones and roms as long as you have root, not yet another a nlp/wakelock blocking "trick".
It's ok if your girlfriend doesn't mind having her z3 flashed with an ASOP ops enabled rom and learn to block the wakelocks of the new apps she's installing, but I prefer not having to explain mine what a wakelock is
- It doesnt cripple your phone at all, it extends its possibilities by adding a gsm based backend to the location provider : your phone was already doing the same except it had to go to a google hosted database to match your location to yourantenna or ip when it is set to use network based location.
Click to expand...
Click to collapse
Your solution is very interesting for sure and something I will try, but my gut feeling is that google play services is still going to look for my location just as often, waking the phone, even though it's communicating with a different database.
Also I'm not sure if you're suggesting that my phone specifically is having NLP wakelocks because it is broken or setup incorrectly, but if so that is totally inaccurate. All android phones are suffering from this wakelock whether the user is aware of it or not. The only ones not having NLP wakelocks are the ones who have disabled location services or somehow turned off the wakelock like I have.

Online User-Interface - Real-time Anti-Theft/Phone Status

Greetings everyone,
https://youtu.be/T9aKmLTujik
What you see above is a "Control Panel" for my own Galaxy S7 Edge. I host this on my own website.
This means it can be seen and accessed from anywhere in the world, on any browser and/or device.
For privacy and security, I will implement a login system in the near future.
It has a couple of neat features, but since they are written in Dutch I will translate them to English:
Information:
Check battery level/percentage and check if your phone is being charged or not
Warns the user from the control panel if the battery is low.
Warns the user from the control panel to pull out the plug out of charging when it is fully charged
Check if your phone is in a light or dark place. I have optimized the light sensor as best as I could, The results are pretty accurate
Clipboard of your current copied content on your phone
Shows the phone model and the date and time of the last update sent from your phone
Check if Bluetooth is enabled or not
Check if Wifi is enabled or not
Show the current WiFi name, Wifi Speed, Wifi Channel & Wifi Signal Strength
Show the current Data Carrier / Mobile Signal strength (Weak, Normal, Strong)
Shows the current Call Volume percentage
Shows the current Media Volume percentage
Check if the screen of the phone is turned on or off
Check if GPS is enabled or not ( There is also a Live Google Maps on the right side, showing where the phone is right now )
Checks if the phone in call / calling / or getting called. ( in other words, it shows the user is busy with a phone conversation )
Checks if the user is browsing on the internet on the phone or not. ( It will check if a browser is open, needs more adjustments for more accurate readings )
I am surprised at the speed of the operations.
It takes a total of 3 to 4 seconds after clicking on "take a picture" button to take a picture from the front-camera and Upload it to my google drive.
It also removes the picture from my phone after it has been uploaded. WIth combination of SMS control this can be a great anti-theft option.
The "Record Audio" function works great too. after clicking on it on the control panel, it starts recording audio, waits 10 seconds ( records for 10 seconds ), stops recording audio and then uploads it to a special folder in my Google Drive.
The "Send SMS" function is very fast. after clicking on it, it will take about 1.5 seconds to send the SMS from your phone.
For now, the number to send the SMS to is hardcoded, but I will make it a variable so that it will be possible to type in the number on your web control panel and send the SMS to the number from your browser.
The "LOCK your phone" function immediately lock your phone remotely, even when your screen is turned off. You can unlock it with the code that has been set up in the Tasker Event.
Clicking on the Wifi, Bluetooth & GPS icon will toggle them( on / off )
Clicking on the Phone (screen) Icon, Will toggle the phone screen ( turns it on and off )
Clicking on the Clipboard icon will copy all the content to your own clipboard.
Not only the text but the icons also change dynamically.
Grey icons represent a false variable (turned off / dark / not in call & etc ) and the blue icons represent the true variables.
For example, in the screenshot above, Bluetooth is turned off and wifi is turned on.
When the battery gets at 15% or less, the icon will turn red and green when it's fully charged (100%) and the user will get an alert box warning with a notification sound straight from the browser about the low battery / full charge . ( Sound and notification can be turned off if you wish).
I have wrote a script with AJAX (Asynchronous JavasScript and XML) to do all of this in Real-time and without page-reloads. AJAX refreshes the page information every second (or whatever the user wants) without reloading the page.
The controls in this control panel are in many cases and in my experience a lot faster than Android Device Manager or other apps like Cerberus and Airdroid.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- On Tasker, I have used Taskers own variables but also created my own variables to be created/changed on certain triggers.
For example, when the lx level ( light sensor ) gets low, it will set a variable to "false" as boolean, meaning there is not enough light == it is dark.
- Next I use this variable in my HTTP POST Request URL to a very simple PHP script on my website I wrote..
The HTTP POST Request URL will post to my PHP Script.
My PHP script grabs the URL, strips certain parts of it, turns it into PHP variables and then sends it to my MySQL database ( all on my own hosting).
- I again use the wonderful Tasker to do all of this this every 2 seconds.
You can get (almost) real-time information about your phone if it's set to be updated every 1 second.
This will not be very heavy on the database so it's possible.
- I then made another webpage containing another simple PHP script that grabs all the variables ( those we saved in previous steps) from my Database and echo's (shows) it on the screen.
This is the very same page you see on the screenshot, This is the Control Panel.
In the last step, all we have to do is visit the webpage on my website.
It will show the control panel as seen in the screenshot. You will also be able to control your phone from here.
I am making a simple login function where users can login.
this means a single database can hold more than 1 user if you wish to.
This will also protect others to see/control your phone from the web as they will need login credentials.
My script will then grab the corresponding variables of your phone when you login, using your ID and checking it on my database.
I know this may sound complicated for a lot of you who think that this is too much work, but I am planning to finish this and make it a some kind of a Open-Source thing available to every android and (rooted) tasker user.
All you need is:
- My Tasker project files ( all you need to do is import it to your own Android )
- Your own webhosting with MySQL database and PHP.
There are TONS of FREE online webhosting that will offer exact this. I'd love to post all the links here, but i'm not sure if it will be seen as advertising, so let me know.
- My PHP script(s), all you need to is simply upload it to your own website.
- My MySQL database configuration file - After importing this single file, the whole database will be created automatically on your website. ( using MySQL on your hosting )
After that, and when my Login function is complete, you could create an account for your self and/or others where they can login from anywhere in the world, on any browser or device and check their phone status and control their phone in Real-Time.

Sicariux said:
Greetings everyone,
i63.tinypic.com/20jsimh.png
What you see above is a "Control Panel" for my own Galaxy S7 Edge. I host this on my own website.
This means it can be seen and accessed from anywhere in the world, on any browser and/or device.
For privacy and security, I will implement a login system in the near future.
It has a couple of neat features, but since they are written in Dutch I will translate them to English:
Information:
Check battery level/percentage and check if your phone is being charged or not
Warns the user from the control panel if the battery is low.
Warns the user from the control panel to pull out the plug out of charging when it is fully charged
Check if your phone is in a light or dark place. I have optimized the light sensor as best as I could, The results are pretty accurate
Clipboard of your current copied content on your phone
Shows the phone model and the date and time of the last update sent from your phone
Check if Bluetooth is enabled or not
Check if Wifi is enabled or not
Show the current WiFi name, Wifi Speed, Wifi Channel & Wifi Signal Strength
Show the current Data Carrier / Mobile Signal strength (Weak, Normal, Strong)
Shows the current Call Volume percentage
Shows the current Media Volume percentage
Check if the screen of the phone is turned on or off
Check if GPS is enabled or not ( There is also a Live Google Maps on the right side, showing where the phone is right now )
Checks if the phone in call / calling / or getting called. ( in other words, it shows the user is busy with a phone conversation )
if the user is browsing on the internet on the phone or not. ( It will check if a browser is open, needs more adjustments for more accurate readings )
I am surprised at the speed of the operations.
It takes a total of 3 to 4 seconds after clicking on "take a picture" button to take a picture from the front-camera and Upload it to my google drive.
It also removes the picture from my phone after it has been uploaded. WIth combination of SMS control this can be a great anti-theft option.
The "Record Audio" function works great too. after clicking on it on the control panel, it starts recording audio, waits 10 seconds ( records for 10 seconds ), stops recording audio and then uploads it to a special folder in my Google Drive.
The "Send SMS" function is very fast. after clicking on it, it will take about 1.5 seconds to send the SMS from your phone.
For now, the number to send the SMS to is hardcoded, but I will make it a variable so that it will be possible to type in the number on your web control panel and send the SMS to the number from your browser.
The "LOCK your phone" function immediately lock your phone remotely, even when your screen is turned off. You can unlock it with the code that has been set up in the Tasker Event.
Clicking on the Wifi, Bluetooth & GPS icon will toggle them( on / off )
Clicking on the Phone (screen) Icon, Will toggle the phone screen ( turns it on and off )
Clicking on the Clipboard icon will copy all the content to your own clipboard.
Not only the text but the icons also change dynamically.
Grey icons represent a false variable (turned off / dark / not in call & etc ) and the blue icons represent the true variables.
For example, in the screenshot above, Bluetooth is turned off and wifi is turned on.
When the battery gets at 15% or less, the icon will turn red and green when it's fully charged (100%) and the user will get an alert box warning with a notification sound straight from the browser about the low battery / full charge . ( Sound and notification can be turned off if you wish).
I have wrote a script with AJAX (Asynchronous JavasScript and XML) to do all of this in Real-time and without page-reloads. AJAX refreshes the page information every second (or whatever the user wants) without reloading the page.
The controls in this control panel are in many cases and in my experience a lot faster than Android Device Manager or other apps like Cerberus and Airdroid.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- On Tasker, I have used Taskers own variables but also created my own variables to be created/changed on certain triggers.
For example, when the lx level ( light sensor ) gets low, it will set a variable to "false" as boolean, meaning there is not enough light == it is dark.
- Next I use this variable in my HTTP POST Request URL to a very simple PHP script on my website I wrote..
The HTTP POST Request URL will post to my PHP Script.
My PHP script grabs the URL, strips certain parts of it, turns it into PHP variables and then sends it to my MySQL database ( all on my own hosting).
- I again use the wonderful Tasker to do all of this this every 2 seconds.
You can get (almost) real-time information about your phone if it's set to be updated every 1 second.
This will not be very heavy on the database so it's possible.
- I then made another webpage containing another simple PHP script that grabs all the variables ( those we saved in previous steps) from my Database and echo's (shows) it on the screen.
This is the very same page you see on the screenshot, This is the Control Panel.
In the last step, all we have to do is visit the webpage on my website.
It will show the control panel as seen in the screenshot. You will also be able to control your phone from here.
I am making a simple login function where users can login.
this means a single database can hold more than 1 user if you wish to.
This will also protect others to see/control your phone from the web as they will need login credentials.
My script will then grab the corresponding variables of your phone when you login, using your ID and checking it on my database.
I know this may sound complicated for a lot of you who think that this is too much work, but I am planning to finish this and make it a some kind of a Open-Source thing available to every android and (rooted) tasker user.
All you need is:
- My Tasker project files ( all you need to do is import it to your own Android )
- Your own webhosting with MySQL database and PHP.
There are TONS of FREE online webhosting that will offer exact this. I'd love to post all the links here, but i'm not sure if it will be seen as advertising, so let me know.
- My PHP script(s), all you need to is simply upload it to your own website.
- My MySQL database configuration file - After importing this single file, the whole database will be created automatically on your website. ( using MySQL on your hosting )
After that, and when my Login function is complete, you could create an account for your self and/or others where they can login from anywhere in the world, on any browser or device and check their phone status and control their phone in Real-Time.
Click to expand...
Click to collapse
It looks like a great project.
Checks if the user is browsing on the internet on the phone or not. ( It will check if a browser is open, needs more adjustments for more accurate readings )
Click to expand...
Click to collapse
What about checking the network traffic to know whether the user is browsing or not?
I know this may sound complicated for a lot of you who think that this is too much work, but I am planning to finish this and make it a some kind of a Open-Source thing available to every android and (rooted) tasker user.
Click to expand...
Click to collapse
Even Open Source? That rocks.
XDA's Tasker subforum isn't that popular. You might wanna post your project on reddit too, where the Tasker community is way bigger and more popular:
https://www.reddit.com/r/tasker/. Let us know if you'll post it there too.
I'm looking forward for this project. Personally, I don't think I would use this as I don't think I really need it (although it doesn't hurt to have an anti-theft), but I'd like to see how it is done, if you're gonna make it Open Source.
Good luck!

Hi and thanks for your reply!
What about checking the network traffic to know whether the user is browsing or not?
Click to expand...
Click to collapse
Do you mean any random network traffic? in that case, a simple incoming whatsapp message could trigger the browser variable and set it to "true".
I will try reddit ... I have tried posting it in the official Tasker forums, but the my post is still awaiting moderator approval after a long time.
Since i've posted this thread, I've created new functions already like video recording (microphone audio included) the phone screen for 10 seconds and upload it to google drive.
I haven't seen this option on any other anti-theft yet. In a case of emergency, you could literally watch the thief do things on your phone and also hear him talking.
Since it's going be to open-source, it's highly customizable. You could change the icons, add new functions, remove functions , change the styling to your own wishes and improve the "web app" overall.

For those interested, Since the first post, I've added more options and starts looking good
https://youtu.be/T9aKmLTujik

For rooted users, you could make an add-on app that the user puts in the /system partition and, in case of factory reset, installs Tasker and restores it's data.
That way, the user has a chance of finding their phone even if the thief performs a factory/hard reset.
EDIT: Are your files available? I can't seem to find them.

Vagelis1608 said:
For rooted users, you could make an add-on app that the user puts in the /system partition and, in case of factory reset, installs Tasker and restores it's data.
That way, the user has a chance of finding their phone even if the thief performs a factory/hard reset.
EDIT: Are your files available? I can't seem to find them.
Click to expand...
Click to collapse
With the new Android versions, this is not a reliable thing anymore. This is the same reason Cerberus App stopped offering a special APK that could be installed in the /system by flashing it.
Also, it would be very difficult to have an add-on app install Tasker, AutoRemote, FolderSync and other plugins it needs automatically and configure them too.
I haven't made my files available yet. I am still perfecting it and awaiting community tips and input to expand the app more before releasing the source-files.

[HOW TO] Common Geolocation Notification Profiles

Let Tasker make you more efficient with your routine activities using Common Geolocation Notification Profiles
Features Include:
Easy access to relevant tasks when you most need them
Minimally intrusive persistent Notification
Themed Notifications for similar-type geolocations
Specific Tasker tasks for similar-type geolocations
Easily scalable for similar-type geolocations
Project Link W/ Setup:
Common Geolocation Notification Profiles
Enjoy!

Do you feel that using autolocation and geofences is battery friendly? I tend to only use "cell near" contexts and tons of terribly designed if statements " if a weekday AND TIME between 01.00 AND 04.00" etc
Do you notice a drain at all?

loogielv said:
Do you feel that using autolocation and geofences is battery friendly? I tend to only use "cell near" contexts and tons of terribly designed if statements " if a weekday AND TIME between 01.00 AND 04.00" etc
Do you notice a drain at all?
Click to expand...
Click to collapse
a small side question if you don't mind, could you please tell me what you use those for? maybe there are other alternative to cell near - personally I don't like/trust the geo context.

I use "cell near" contexts to determine my geolocation, and then if i really need to pinpoint my location I'll add two or three more contexts to that profile, such as "wifi near" or "location" but i only willl use taskers built in location because Tasker is designed to check the lowest battery consuming context first, and never check the others (more battery consuming) until that first is active.
So Tasker will only check cell near until cell near becomes active then it will check "my location"
I use this to determine when I'm home, or when I'm at work.
I never allow contexts that consistently poll and toll my battery. For instance the app context pulls your system every two seconds to see if that app is open and I will not allow that. I also do not allow "wait actions" in my tasks as nothing will suck your battery faster than setting something to wait 3 minutes (or 30 seconds even) before continuing with the task. I am happy to say that I can have as many as two hundred profiles enabled and waiting without noticing any sort of impact on my battery
Edit: one more thing if I must have a very precise battery sucker profile such as GPS or perhaps a plug-in that was not written by the strongest of coders I will pragmatically enable a disabled that profile with other profiles to make sure of the most minimal impact possible

very intense! :good:
for home detection, I use a 4-times-per-hour poll for Wi-Fi, I think it does not have any noticeable effect.
as for wait, I totally agree, a long wait do immensely affect the battery, so I just use mostly some seconds wait.

loogielv said:
Do you feel that using autolocation and geofences is battery friendly?
Click to expand...
Click to collapse
Do you notice a drain at all?[/QUOTE]
AutoLocation has been very battery friendly to me. I've used its Geofence monitoring for years now and have not noticed any adverse impacts on my battery life. Hope that helps!
loogielv said:
I tend to only use "cell near" contexts and tons of terribly designed if statements " if a weekday AND TIME between 01.00 AND 04.00" etc
Click to expand...
Click to collapse
I bet those can get very complicated haha.
Did you try out the project by chance? if so, did you happen to add any Tasks to the Profiles, and what were they? ...just curious! Thanks!

[GUIDE] Device Settings Menu Guide, Tips & Discussions | Part I - Connections

Device Settings Menu Guide, Tips & Discussions
Part 1 - Connections​
If you're new to this series or want to see the index, please read Post #2 first.​
The post has been updated as per the settings menu in latest Pie update.[/CENTER]
Wifi
Click on any network:
View supported Network speed, allocated IP address, gateway IP.
Toggle 'Auto Reconnect' to allow/disallow device to connect automatically to the network if it's in range.
Hold on any network > Manage network settings > Advanced > Set Static IP and DNS; Set Proxy;
Wifi Direct: Turn on Wifi Direct on a nearby device as well to transfer files wirelessly and fastly (speed up to gateway supported speed).
Menu > Advanced:
Turn on Wi-Fi Automatically: Your device will automatically enable Wi-Fi where you use it frequently. For example, you can disable your WiFi when you go out and you won't need to enable it again when you get back home. Tasker handles this job for me (try IFTTT for simpler setup).
Wi-Fi power saving mode: (On Pie, hop to developer mode) Analyzes your usage pattern and accordingly toggles WiFi. For example, if you get WhatsApp messages every 30 minutes on an average, the device learns about this traffic pattern and can toggle WiFi accordingly to fetch notifications every 30 minutes or whatsoever period is calculated. I keep this disabled as my usage pattern, like most of you, is dynamic. Better use App Sleep or Hibernation Apps like Greenify to save battery. Learn more about this mode here.
Wi-Fi control history: View apps that have toggled Wi-Fi recently. You can figure out if there's any culprit app that is toggling your Wi-Fi frequently when you have explicitly turned it off/on.
Hotspot 2.0: Automatically connects to APs that support Hotspot 2.0 or 802.11u. Network providers are themselves upgrading existing WiFi in public areas like airports and encryption is a must for Hotspot 2.0 so you can trust and rely on it while you don't have to manually guess the right network. Learn more about Hotspot 2.0 here.
WPS push button; WPS PIN Entry: (Pie doesn't support WPS but Google says it's coming back, Read here) Connect the device to WiFi by pushing WPS button on the router or entering WPS PIN in case these are enabled on the router. Learn about WPS here.
Install network certificates: Normally not needed. Some organization would need you to install certificates to access their domains. Same as what you do on PC to install certificates.
View device's MAC address and allocated IPv6/IPv4. Learn about MAC and IPs here.
Bluetooth
When the Bluetooth is ON, you can STOP/SCAN for nearby devices manually. Keep BT on for playing with following settings.
Menu > Advanced:
Dual Audio: Enables your device to connect to 2 different audio devices and play the same audio on both of them. Samsung explains this here.
Media volume sync: In case the connected audio device supports this, you can change the player's volume by your device's volume rockers by enabling this i.e. you don't have to manually raise the volume to the fullest on both your device and the connected player to get the highest volume possible for your house party.
Ringtone sync: Suggest usage?
Bluetooth control history: Similar as 'WiFi control history' above.
Phone visibility: (Moved to Separate section after Bluetooth in Pie, please tell if it works for BT as well) Allow devices (with Samsung Connect) to find your device for connection. You can disable it unless you live in a Smart Home or transfer files from other devices more often. Learn more about this mode here.
NFC and payment
It's turned ON by default on a new phone so do turn it OFF first. Samsung Pay will turn that ON if needed. The best thing about Samsung's flagship - Samsung Pay uses both NFC and MST (no other brand can do this) for payments. In case you don't know about MST (patented by LoopPay), must read here. MST works everywhere so I've keep NFC disabled.
Android Beam: Allows you to share stuff when you tap your phone with some other-phone-with-already-enabled-NFC.
Tap and pay: Select the default app for Payments and Others. Your default app will open up when you, for instance, tap your phone on an NFC-enabled POS (of course you need NFC to remain ON beforehand). Change 'If open app supports Tap and Pay' to 'Use open app instead of Samsung Pay' in case you want the App's own NFC payment feature, for example, in ICICI's Pockets.
Default NFC Method: By default and normally needed, 'Auto select'. In case you are the curious breed, learn about the different options here.
Flight Mode
Disables your operator's network. Since enabling this will also disable WiFi and Bluetooth altogether, you can turn back these two on without toggling flight mode.
Mobile networks
Data roaming: Enable it if your carrier doesn't charge you for roaming or you're rich enough.
VoLTE calls Primary: You'll see this in case your carrier supports VoLTE calling. #JioWaale
Network mode: By default, 'auto connect'. You can play with the options in case you're facing network mode changing issues or want to save battery (put to 2G only).
Access Point Names: I recommend you to request or configure your operator's settings for the first time even if it had been automatically fetched.
Data usage
Data saver: Formerly known as 'Restrict background data'. Your background apps will stop using network data i.e. you'll receive WhatsApp notifications only when you open the app again. You can also whitelist apps in 'Allow app while Data saver on'. This feature can help a lot in saving battery or making you check the phone less when you're hanging out with your girl. Me no girl so no enable!
Mobile data usage; Billing cycle and data warning: Do check this in a while to review the apps that uses most of your mobile data (maybe you don't need those apps that much on mobile data); Change your operator billing cycle, set data warning and enable data limit in case your operator doesn't give you free GBs.
Wi-Fi data usage; Restrict networks: Like mobile data, you can also review your Wi-Fi usage. Do review it once in a while to identify data-hungry apps that can affect battery and CPU as well; 'Restrict networks' (not available in Pie) helps you define your WiFi networks as 'metered'. It can be useful in a situation where a WiFi network you use is in fact a hotspot running on a device that uses mobile data. You can now restrict apps to use background data as described before in 'Data Saver'.
SIM card manager
Select Icon, Name and Network mode (described above) for the corresponding 'SIM slot' (not the SIM). Select preferred slot for calls, messaging and data. Learn about Smart Dual SIM here.
Mobile Hotspot and Tethering
Mobile Hotspot:
Wi-Fi sharing: In addition to mobile data, you can also share your Wi-Fi. This can be helpful in case you don't want to reveal your network or its credentials or don't know about them.
Menu > Allowed Devices: Enter MAC addresses of clients you want only to connect to your hotspot. Same as MAC filtering in routers.
Menu > Configure Mobile Hotspot; Timeout: Enable 'Hide my device' to stop exposing your SSID. Use 'WPA2 PSK' (Learn about wireless encryption here). 'Power saving mode' is similar to PMS in WiFi Advanced. Keep PMF on by default and change in case client doesn't support; Keep timeout low so that hotspot turns itself OFF earlier in case there's no client or change to 'Never Timeout' if you are going to need it for some time.
Bluetooth tethering; USB tethering: Learn about BT/USB tethering here.
More connection settings
Nearby device scanning: Although it uses Bluetooth Low Energy, I don't live in a Smart Home so have it disabled. If you enable it, you get notifications for nearby devices like TVs that support connections through your device (will annoy you at airports).
Printing: Do download Google Cloud Print and any other printing plugin required by your or your organization's printer.
MirrorLink: Great feature but I don't own a car. Learn more here.
Download Booster: Uses both WiFi and LTE at the same time to download apps over 30MB from Play Store and Galaxy Apps. In case you want that app as soon as possible.
VPN: Configure your VPNs here in case you have. I use Psiphon. You can also manually configure profiles as you do on PC.
Ethernet: Yes, you can use wired connection on your device too. Discussions here.
Private DNS: Pie supports DNS over HTTP/TCP and I recommend reading about this here. I use 1dot1dot1dot1.cloudflare-dns.com.

Series - Full Menu Guide Explained
Series - Device Settings Menu Guide​
Hey XDA! I just got free from the initial setup of my Galaxy Note9. I don't know how many of you do this but I'm one of a kind that gives a considerable amount of time to explore every setting, feature and every single option whenever I get a new device or even when I factory reset the existing one. It's been years since I have started with this curiosity and I have never found an 'all-in-one' menu guide to explain each and every option in the device. Yes, you could also simply google the option you want to know about but how about compiling all of them in one guide? I don't know if this experiment would work or not but here's I am starting with this. I have spent the past three weeks taking out time whenever I could to compile this guide.
There are a couple of reasons I had decided upon to start with this series. Firstly, I want to help newbies (or even experienced) out there to explore and know about every feature or option your device could offer. I have seen many duplicate threads that are created every day to query fellow users even about an individual but unfamiliar option in the settings. I intend to do my bit to clear this clutter and help potential askers to get answers beforehand. Secondly, this guide could serve as a manual in case you want to find or get briefed about an option. You could then simply 'Find in a page' over the threads or simply use XDA's 'search in the thread' option to save your time. Thirdly, since I've broken the settings into different threads, this could help users engage and discuss over a particular device's super-menu and spread their knowledge, come up with new ideas and explore more of their devices. Fourthly, this series is not constrained to Note9 only. The settings on every Android device out there is similar and you would be able to find any common to your device settings here as well. Fifthly, since I have provided links and sources to some options, this can serve as directory map as well. Sixthly, this guide consists of tips for many options that you won't probably find normally.
This guide is intended and recommended to be read by anyone at least once. If you're reading a thread for the first, I recommend you to open up the corresponding settings in your phone and read the settings description in case there is. All the threads are arranged in the same order as the settings would come up. You could then simply read out my description of the same, my selected configuration and hyperlinks to some articles or videos in case you're the curious breed. This guide is strongly recommended after a fresh start. I want you all to give some time to explore each and every option your device can offer.
Hope this experiment lives up to the marks. Both criticism and appreciation are greatly needed and appreciated. Please comment.
I've tried to explain each option you could find by going deep into any setting. No matter whatever links I have provided, I will feel grateful if you want me to explain any feature more than I have done already. Please ask questions related to any settings. Do provide me suggestions and your take on my configuration. Please provide me with more guides and articles for a particular feature. I want to have the precious contribution of XDA members in this guide. Discussion over any feature, setting, your configuration, did-you-knows and anything else is greatly appreciated. This is a newbie-friendly place so don't hesitate to ask questions - besides the fellow XDA members, I'm always here for you.
Regards,
Paras Lehana
Index
Part 1 - Connections
Part 2 - Sounds and vibration, Notifications, Wallpaper and themes
Part 3 - Display, Lock screen, Biometrics and security
Part 4 - Advanced features, Device maintenance, Apps
Part 5 - Cloud and accounts, Google, Accessibility, General management, Software update, User manual, About phone, Developer options
​

-- Reserved for FAQs --

Why are you posting this?
There's a very good "USER MANUAL" on the "Samsung"-site available:
User Manual Samsung Galaxy Note9

henklbr said:
Why are you posting this?
There's a very good "USER MANUAL" on the "Samsung"-site available:
User Manual Samsung Galaxy Note9
Click to expand...
Click to collapse
You have commented the same query on each of my parts. I have already answered you here where the similar discussion is already going on. Let's discuss there and keep this thread clean. Also, the 'why am I posting this' is already described in the Introductory Post.

Is there a way to toggle the "WiFi networks available" notification off?. It seems Samsung's removed this option from the advanced WiFi menu as well as grayed it out from the advanced notifications panel. Thanks.

astrodemoniac said:
Is there a way to toggle the "WiFi networks available" notification off?. It seems Samsung's removed this option from the advanced WiFi menu as well as grayed it out from the advanced notifications panel. Thanks.
Click to expand...
Click to collapse
I tried searching for this on the internet and found that a lot of users are annoyed by this. Did you try disabling Wi-Fi scanning in Connections > Location > Improve accuracy ? Do you even get notifications when your Wi-Fi is turned off? Next time you get this notification, long tap on the notification to know which system package/app is firing this notification. Try disabling it from there. And, can you post screenshot of "advanced notifications panel" where you're seeing grayed out option?

Can the settings menu be sorted alphabetically? in either lineage or stock roms

Problem with 192.168.100.1 address
Everytime I type in the 192.168.100.1 address, I receive a message "Internet Explorer Cannot Display
Webpage". I have tried this several times and it doesn't connect me to the website.
HELP

Samsung services dialling home to China (360.cn and 360safe.com) after Pie upgrade

Having ran NetGuard in logging mode for a few days now I've noticed that many of Samsung's in-built services are contacting web services associated at multiple DNS subdomains under:
- *.360.cn
- *.cloud.360safe.com
A lot of them on unsecured HTTP port 80 (some go via HTTPS port 443).
Services I've observed this behaviour so far are:
- Samsung ApexService
- ANT+ HAL Service
- Application installer (com.sec.android.preloadinstaller)
- Assistant Menu
- AirCommandManager (com.samsung.android.aircommandmanager)
- Plus too many other default services to list (most of which cannot be disabled)
Phone's running on stock unbranded SM-N960F build number PPR1.180610.011.N960FXXU2CSA2.
I've scanned the phone using bundled Device Care's McAfee security scan with no findings.
Has anyone else observed this behaviour?

sengork said:
Having ran NetGuard in logging mode for a few days now I've noticed that many of Samsung's in-built services are contacting web services associated at multiple DNS subdomains under:
- *.360.cn
- *.cloud.360safe.com
A lot of them on unsecured HTTP port 80 (some go via HTTPS port 443).
Services I've observed this behaviour so far are:
- Samsung ApexService
- ANT+ HAL Service
- Application installer (com.sec.android.preloadinstaller)
- Assistant Menu
- AirCommandManager (com.samsung.android.aircommandmanager)
- Plus too many other default services to list (most of which cannot be disabled)
Phone's running on stock unbranded SM-N960F build number PPR1.180610.011.N960FXXU2CSA2.
I've scanned the phone using bundled Device Care's McAfee security scan with no findings.
Has anyone else observed this behaviour?
Click to expand...
Click to collapse
I haven't looked at this as closely as you have,but,I'm guessing it's all tied-in from the Device Maintenance section of the phone.
The name of the company Samsung is currently in bed with is QIHOO:
https://en.wikipedia.org/wiki/Qihoo_360
https://seekingalpha.com/article/4165136-cheetah-mobile-lost-samsung-relevant-risks
Remember/heard of Cheetah Mobile (of Clean Master infamy) ?
https://www.prnewswire.com/news-rel...mobile-security-and-innovation-300043298.html
Well,that's who used to be in partnership w/Samsung & the Device Maintenance aka built-in Clean Master to most,if not all Samsung mobile products.
Fast-Forward to present day & we still have the crapware on our phones,likely scraping info & selling it to anyone interested.
Now,it's just with another company,presumably one with friendlier terms for Samsung.
As you've probably noticed,you can't fully disengage/disable/deny all permissions here,less root (or ADB disabling/package disabler apps).
At least you have a phone that's rootable & can cruise the ROM scene for one that leaves this crap off the phone.
If root isn't an option:
Set up your phone & apps,fine-tune as you like for battery optimization on a per app basis/permissions/etc....
Then,either via ADB or a package disabler,disable the apps responsible for the crapware,especially the ones related to Device Maintenance.
https://forum.xda-developers.com/ga...laxy-note-9-bloatware-removal-thread-t3857508
Follow the link in the OP to the S9/S9+ forum/thread,it gives a better idea of what each .apk actually is/ties into.
Here's the app I use to disable crapware/things I don't use:
https://play.google.com/store/apps/details?id=com.wakasoftware.appfreezer
As to which apps to disable,the S9/S9+ thread,while not an exact match,should give you info on what to disable to stop the phone from pinging the 360 mothership & hopefully,not having any ill effects on the apps you want to keep on-board.
If you want a better idea of how each app is interconnected throughout the phone,use these two apps to take a look:
https://play.google.com/store/apps/details?id=com.ubqsoft.sec01
SD Maid (Pro):
https://play.google.com/store/apps/details?id=eu.thedarken.sdm&hl=en_US
(See the App Control & file manager sections of SD Maid for detailed app info).
Anyhoo,back to curbing the nonsense:
Whichever method you use to disable,should you choose to do so,start with this one:
com.samsung.android.lool (Device Maintenance).
This will make the entire Device Maintenance section inaccessible as well.
That is why I suggest disabling vs outright uninstalling (which necessitates a factory reset to get it back).
You may need to access Device Maintenance for whatever reason from time to time,hence the recommendation for disabling vs uninstalling.
Continue monitoring for a day or so & see if the pinging to the Mothership subsides,or hopefully puts a full-stop to it.
Please keep us updated on what,if any actions you take w/the results. :good:

Excellent overview, it's quite an eye opener thanks for the info.
I've disabled and force-stopped "com.samsung.android.lool" (amongst other junkware) and so far NetGuard hasn't shown a single network log entry to any of the 360 domains. I've uninstalled all 4 Facebook packages. Continuing to monitor this closely. My thought is that I can re-enable "com.samsung.android.lool" from time to time whenever maintenance is needed and then disable it again. Even better Adhell3 might be useful for blocking "com.samsung.android.lool" network attempts whilst retaining it for device management purposes however I haven't tried this yet.
For reference, here is my current list of disabled packages:
Code:
package:com.monotype.android.font.rosemary
package:com.samsung.android.app.ledcoverdream
package:com.sec.android.widgetapp.samsungapps
package:com.samsung.android.app.galaxyfinder
package:com.samsung.svoice.sync
package:com.cnn.mobile.android.phone.edgepanel
package:com.samsung.android.easysetup
package:com.samsung.android.provider.stickerprovider
package:com.samsung.android.app.sbrowseredge
package:com.samsung.android.rubin.app
package:com.sec.android.cover.ledcover
package:com.samsung.faceservice
package:com.monotype.android.font.foundation
package:com.sec.android.widgetapp.easymodecontactswidget
package:com.samsung.android.app.settings.bixby
package:com.sec.android.app.billing
package:com.samsung.android.app.selfmotionpanoramaviewer
package:com.samsung.android.game.gamehome
package:com.samsung.daydream.customization
package:com.sec.enterprise.knox.attestation
package:com.samsung.systemui.bixby2
package:com.dsi.ant.service.socket
package:com.microsoft.skydrive
package:com.samsung.SMT
package:com.samsung.android.drivelink.stub
package:com.android.hotwordenrollment.xgoogle
package:com.samsung.android.sm.devicesecurity
package:com.dsi.ant.sample.acquirechannels
package:com.samsung.android.aircommandmanager
package:com.samsung.android.bixby.service
package:com.samsung.android.smartface
package:com.android.egg
package:com.samsung.android.emojiupdater
package:com.samsung.android.bixby.agent
package:com.android.printspooler
package:com.android.hotwordenrollment.okgoogle
package:com.samsung.android.hmt.vrsvc
package:com.samsung.storyservice
package:com.android.dreams.basic
package:com.android.bips
package:com.samsung.android.game.gametools
package:com.samsung.android.app.simplesharing
package:com.samsung.android.service.peoplestripe
package:com.samsung.android.da.daagent
package:com.dsi.ant.plugins.antplus
package:com.samsung.android.app.taskedge
package:com.google.android.webview
package:com.samsung.android.app.mirrorlink
package:com.dsi.ant.server
package:com.samsung.android.allshare.service.fileshare
package:com.samsung.android.universalswitch
package:com.sec.android.app.apex
package:flipboard.boxer.app
package:com.google.android.printservice.recommendation
package:com.monotype.android.font.chococooky
package:com.android.dreams.phototable
package:com.samsung.android.bixbyvision.framework
package:com.samsung.android.game.gos
package:com.android.wallpaper.livepicker
package:com.samsung.android.beaconmanager
package:com.sec.enterprise.mdm.services.simpin
package:com.samsung.android.stickercenter
package:com.samsung.android.bixby.wakeup
package:com.samsung.android.samsungpass
package:com.samsung.android.spayfw
package:com.linkedin.android
package:com.samsung.android.lool
package:com.samsung.android.knox.analytics.uploader
package:com.samsung.android.sm.policy
package:com.sec.android.emergencylauncher
package:com.samsung.android.visionintelligence
package:com.samsung.android.app.watchmanagerstub
package:com.samsung.android.svoiceime
package:com.samsung.android.mateagent
package:com.enhance.gameservice
package:com.google.vr.vrcore
package:com.hiya.star
package:com.sec.enterprise.knox.cloudmdm.smdms
package:com.samsung.android.app.appsedge
package:com.samsung.android.samsungpassautofill
package:com.monotype.android.font.cooljazz
package:com.samsung.android.allshare.service.mediashare
package:com.samsung.android.app.clipboardedge
package:com.samsung.android.app.motionpanoramaviewer
package:com.samsung.android.bio.face.service
package:com.samsung.android.bixby.agent.dummy

sengork said:
Excellent overview, it's quite an eye opener thanks for the info.
I've disabled and force-stopped "com.samsung.android.lool" (amongst other junkware) and so far NetGuard hasn't shown a single network log entry to any of the 360 domains. I've uninstalled all 4 Facebook packages. Continuing to monitor this closely. My thought is that I can re-enable "com.samsung.android.lool" from time to time whenever maintenance is needed and then disable it again. Even better Adhell3 might be useful for blocking "com.samsung.android.lool" network attempts whilst retaining it for device management purposes however I haven't tried this yet.
For reference, here is my current list of disabled packages:
Code:
package:com.monotype.android.font.rosemary
package:com.samsung.android.app.ledcoverdream
package:com.sec.android.widgetapp.samsungapps
package:com.samsung.android.app.galaxyfinder
package:com.samsung.svoice.sync
package:com.cnn.mobile.android.phone.edgepanel
package:com.samsung.android.easysetup
package:com.samsung.android.provider.stickerprovider
package:com.samsung.android.app.sbrowseredge
package:com.samsung.android.rubin.app
package:com.sec.android.cover.ledcover
package:com.samsung.faceservice
package:com.monotype.android.font.foundation
package:com.sec.android.widgetapp.easymodecontactswidget
package:com.samsung.android.app.settings.bixby
package:com.sec.android.app.billing
package:com.samsung.android.app.selfmotionpanoramaviewer
package:com.samsung.android.game.gamehome
package:com.samsung.daydream.customization
package:com.sec.enterprise.knox.attestation
package:com.samsung.systemui.bixby2
package:com.dsi.ant.service.socket
package:com.microsoft.skydrive
package:com.samsung.SMT
package:com.samsung.android.drivelink.stub
package:com.android.hotwordenrollment.xgoogle
package:com.samsung.android.sm.devicesecurity
package:com.dsi.ant.sample.acquirechannels
package:com.samsung.android.aircommandmanager
package:com.samsung.android.bixby.service
package:com.samsung.android.smartface
package:com.android.egg
package:com.samsung.android.emojiupdater
package:com.samsung.android.bixby.agent
package:com.android.printspooler
package:com.android.hotwordenrollment.okgoogle
package:com.samsung.android.hmt.vrsvc
package:com.samsung.storyservice
package:com.android.dreams.basic
package:com.android.bips
package:com.samsung.android.game.gametools
package:com.samsung.android.app.simplesharing
package:com.samsung.android.service.peoplestripe
package:com.samsung.android.da.daagent
package:com.dsi.ant.plugins.antplus
package:com.samsung.android.app.taskedge
package:com.google.android.webview
package:com.samsung.android.app.mirrorlink
package:com.dsi.ant.server
package:com.samsung.android.allshare.service.fileshare
package:com.samsung.android.universalswitch
package:com.sec.android.app.apex
package:flipboard.boxer.app
package:com.google.android.printservice.recommendation
package:com.monotype.android.font.chococooky
package:com.android.dreams.phototable
package:com.samsung.android.bixbyvision.framework
package:com.samsung.android.game.gos
package:com.android.wallpaper.livepicker
package:com.samsung.android.beaconmanager
package:com.sec.enterprise.mdm.services.simpin
package:com.samsung.android.stickercenter
package:com.samsung.android.bixby.wakeup
package:com.samsung.android.samsungpass
package:com.samsung.android.spayfw
package:com.linkedin.android
package:com.samsung.android.lool
package:com.samsung.android.knox.analytics.uploader
package:com.samsung.android.sm.policy
package:com.sec.android.emergencylauncher
package:com.samsung.android.visionintelligence
package:com.samsung.android.app.watchmanagerstub
package:com.samsung.android.svoiceime
package:com.samsung.android.mateagent
package:com.enhance.gameservice
package:com.google.vr.vrcore
package:com.hiya.star
package:com.sec.enterprise.knox.cloudmdm.smdms
package:com.samsung.android.app.appsedge
package:com.samsung.android.samsungpassautofill
package:com.monotype.android.font.cooljazz
package:com.samsung.android.allshare.service.mediashare
package:com.samsung.android.app.clipboardedge
package:com.samsung.android.app.motionpanoramaviewer
package:com.samsung.android.bio.face.service
package:com.samsung.android.bixby.agent.dummy
Click to expand...
Click to collapse
:good: THX for the update,much appreciated! :good:
I was gonna post this in a bit (just noticed it myself this afternoon,LOL) ,but,it looks like you have added the other two .apks to your disabled list:
https://forum.xda-developers.com/showpost.php?p=78103170&postcount=123
It'a a shame the mfgs aren't required to be more up-front & state ,in common use language where the print is larger than a gnat's ass, the exact nature of the .apks & even more control over the services installed on them.

KOLIOSIS said:
It'a a shame the mfgs aren't required to be more up-front & state ,in common use language where the print is larger than a gnat's ass, the exact nature of the .apks & even more control over the services installed on them.
Click to expand...
Click to collapse
The closest to a manufacturer application list I came across was:
- https://support.samsungknox.com/hc/en-us/articles/115015195728-Common-Criteria-Mode
- For example https://docs.samsungknox.com/CCMode/N960F_O.pdf
This seems to relate to computer security certification known as Common Criteria:
- https://en.wikipedia.org/wiki/Common_Criteria
So the dial home behaviour seems to have passed this security certification (or perhaps the network flows were not part of the certification process). We can only guess...

I've had to reenable the following items to get APK installs to function (either through Play Store or locally stored APKs):
Code:
com.samsung.android.sm.policy
com.samsung.android.sm.devicesecurity
https://forum.xda-developers.com/ga...val-thread-t3857508/post78744845#post78744845
Continuing to monitor with NetGuard. So far ~1hr I haven't seen the packets repeat.

sengork said:
I've had to reenable the following items to get APK installs to function (either through Play Store or locally stored APKs):
https://forum.xda-developers.com/ga...val-thread-t3857508/post78744845#post78744845
Continuing to monitor with NetGuard. So far ~1hr I haven't seen the packets repeat.
Click to expand...
Click to collapse
IIRC,something like this was mentioned in the S9/S9+ debloat thread.
I didn't mention it earlier as you hadn't reported any issues,but,glad you were able to figure it out/find the same info I'd stumbled upon.

Well after a day of usage I can say that battery life is poorer without "com.samsung.android.lool". I've enabled it again now and blocked its domains via Adhell 3:
Code:
360.cn
360safe.com
*.360.cn
*.360safe.com
Furthermore I have disabled its WiFi and Mobile network access in Adhell 3. However this block is bypassed whenever applications using Android's native VPN facility are switched on so its not absolutely fool proof. Similar blocking can be done using NetGuard itself as long as you keep it switched on and filtering continuously.
I'll keep an eye on which other domains it attempts to contact.

sengork said:
Well after a day of usage I can say that battery life is poorer without "com.samsung.android.lool". I've enabled it again now and blocked its domains via Adhell 3:
Code:
360.cn
360safe.com
*.360.cn
*.360safe.com
Furthermore I have disabled its WiFi and Mobile network access in Adhell 3. However this block is bypassed whenever applications using Android's native VPN facility are switched on so its not absolutely fool proof. Similar blocking can be done using NetGuard itself as long as you keep it switched on and filtering continuously.
I'll keep an eye on which other domains it attempts to contact.
Click to expand...
Click to collapse
How much of a difference in battery life are we talking about?

It felt to be about 20%. Is Pie without Device Maintenance expected to put applications to sleep? I am guessing sleep is the major factor here (opposed to cleaning up caches and other storage capacity functions of Device Maintenance app).

sengork said:
It felt to be about 20%. Is Pie without Device Maintenance expected to put applications to sleep? I am guessing sleep is the major factor here (opposed to cleaning up caches and other storage capacity functions of Device Maintenance app).
Click to expand...
Click to collapse
I would like to think so,hoping Device Maintenance isn't ingrained to the level where it breaks the native Doze feature in Android.
JMHO,Device Maintenance seems to be just like Clean Master,running on top of Android/counterproductive,putting a hat on a hat,so to speak,LOL.
I haven't had a Nexus device since the N6 & never had a Pixel,but,I'm pretty sure none of 'em have DM..................................
Whenever I decide to update to Pie,I'm going to continue as I am now:
Battery Optimize all apps that I don't rely on for auto-updating or push notifications & then disabling Device Maintenance.
If something starts acting up,only then do I re-enable DM,take a look at Battery Optimizing for whatever is affected & again,disabling DM.
Guessing you've just recently updated to Pie.......
If it were me,I'd continue to disable DM & give the new OS upgrade a week or so,see what your battery life looks like then.
Battery life loss could be due to some user-installed apps that aren't playing nice w/Pie & not due to DM being disabled.

You will find the logo or text "powered by 360" on storage screen in Samsung device management app.

KOLIOSIS said:
Battery Optimize all apps that I don't rely on for auto-updating or push notifications & then disabling Device Maintenance.
If something starts acting up,only then do I re-enable DM,take a look at Battery Optimizing for whatever is affected & again,disabling DM.
Click to expand...
Click to collapse
I have taken your advise a few weeks ago and have concluded that removing DM whilst manually optimising all individual apps has resulted in no battery loss (in fact it has probably improved but this is within a margin of error). Thanks for your guidance.

Unless you need to connect to a Chinese domain for whatever reason, just block *. cn for good and forever about it.

hello guys i have bought galaxy note 9 in China and there is not preinstalled google play store app...
can anyone tell me how to install safely ))?? thank you ...

hey thanks for your attention but i dont need to access i have vpn i know how to access i want to know how to install because it is not installed so do you have some ideas ?))) how to do it

sandro comaia said:
hey thanks for your attention but i dont need to access i have vpn i know how to access i want to know how to install because it is not installed so do you have some ideas ?))) how to do it
Click to expand...
Click to collapse
Just side-load this .apk & you should be good to go:
https://www.apkmirror.com/apk/googl...5-22-all-0-pr-254908059-android-apk-download/

Was original poster was the only one who had this issue?
Is this a samsung thing or all androids?
Can this be a security risk?
There was a link to the s9 bloatware thread but it doesn't work
https://forum.xda-developers.com/ga...laxy-note-9-bloatware-removal-thread-t3857508
Says 404 not found for me

Nameduser6 said:
Was original poster was the only one who had this issue?
Is this a samsung thing or all androids?
Can this be a security risk?
There was a link to the s9 bloatware thread but it doesn't work
https://forum.xda-developers.com/ga...laxy-note-9-bloatware-removal-thread-t3857508
Says 404 not found for me
Click to expand...
Click to collapse
Should be only Samsung phones. Interestingly i haven't seen it dial home since my original post and up until i uninstalled the Device Care package. Samsung might have changed the domains the tool dials home to.
Sent from my SM-N960F using Tapatalk