[Q] Can this i9000 be recovered?? or is it totally bricked?? - Galaxy S I9000 Q&A, Help & Troubleshooting

Hey all,
I have recently been given a phone by a friend, a SGS i9000. He bought it as is, and being n00b he couldnt describe anything to me about how or why it was like this. As I have a i9000 myself I took a bit of a look at it, I have no idea what firmware,rom,kernel etc is on it. After researching around it seems to be locked in a bootloop, I can not access any recovery menu, if I hold the power + home button I get the screen below (found this button combo somewhere in the forums, attaining to the Samsung anycall, korean?), but when plugged into my computer it comes up saying "windows could not recognize device blah blah". Any hope??? Last resort will be to get a jig, but ive never had to use them before and not sure if it will solve my issue. Any help would be much appreciated.
Thanks
battznz

battznz said:
Hey all,
I have recently been given a phone by a friend, a SGS i9000. He bought it as is, and being n00b he couldnt describe anything to me about how or why it was like this. As I have a i9000 myself I took a bit of a look at it, I have no idea what firmware,rom,kernel etc is on it. After researching around it seems to be locked in a bootloop, I can not access any recovery menu, if I hold the power + home button I get the screen below (found this button combo somewhere in the forums, attaining to the Samsung anycall, korean?), but when plugged into my computer it comes up saying "windows could not recognize device blah blah". Any hope??? Last resort will be to get a jig, but ive never had to use them before and not sure if it will solve my issue. Any help would be much appreciated.
Thanks
battznz
Click to expand...
Click to collapse
Identify what Phone it could be by checking its top corner for a Tucked in TV Antenna ...if you can pull out an Antenna its an M110S, if not it is an i9000 flashed with a wrong ROM. IF its M110S , just use PIT STOP link below to resolve using How to flash guide
The Anycall screen you are getting means it is still in download mode and can be detected by Odin, if not do a battery pull ( follow My Android Solutions, link below)

xsenman said:
Identify what Phone it could be by checking its top corner for a Tucked in TV Antenna ...if you can pull out an Antenna its an M110S, if not it is an i9000 flashed with a wrong ROM. IF its M110S , just use PIT STOP link below to resolve using How to flash guide
The Anycall screen you are getting means it is still in download mode and can be detected by Odin, if not do a battery pull ( follow My Android Solutions, link below)
Click to expand...
Click to collapse
Thanks for your reply.
I have looked to see if there is an antenna, nothing there. Ive tried rebooting the PC, and done a battery pull. Whilst in bootloop ive plugged in the phone, nothing comes up. Whilst in download mode, ive plugged in the phone, device detected but unrecognized. I removed everything......then......
1) Uninstalled all drivers and KIES from my PC > Reboot
2) Went to Android solutions, started with step one, no help.
3) Went onto step 2 (Problem:- Cannot connect to PC or Unknown Device, getting Code 43 or any other code or NO response when using USB cable),I checked to see if any pins were bent, and cleaned the contacts using some mini brushes I had. I am using a Samsung USB, same one i use for my i9000, which works 100%. Installed and tried every driver seperately, whilst trying to see if odin would detect anything.
NOTHING :crying:
Tried different ports etc. The only response I get is when ive put the phone into download mode (Home+Power), then all I get when connected to PC is "USB Device not Recognized". Im grateful that I get that, but cant do much else haha.
Can you suggest anything else?? can I even use the jig as a last resort???

Did you remember that you need to reinstall drivers?

monkeywithbanana said:
Did you remember that you need to reinstall drivers?
Click to expand...
Click to collapse
Hey thanks for your reply, if youre referring to the PC, then yes I removed all the drivers that did not work, and lastly reinstalled Samsung KIES. Still no change to the device being recognized by windows.

battznz said:
Can you suggest anything else?? can I even use the jig as a last resort???
Click to expand...
Click to collapse
Nothing wrong with the phone except that its, now loaded with a wrong boot loader, ...try borrow a lap top or PC to connect in download mode, to flash a i9000 rescue or resurrection kit from MY Androids collections link below

xsenman said:
Nothing wrong with the phone except that its, now loaded with a wrong boot loader, ...try borrow a lap top or PC to connect in download mode, to flash a i9000 rescue or resurrection kit from MY Androids collections link below
Click to expand...
Click to collapse
Thanks I will give it a try, will let ya know how I get on.

Hi,
Thanks for the guide, i got 90% there and the program closed. This is what I got, when using the heimdall rescue kit:
Uploading KERNEL
100%
KERNEL upload successful
Uploading MODEM
100%
MODEM upload successful
Uploading FACTORYFS
100%
FACTORYFS upload successful
Uploading DBDATAFS
100%
DBDATAFS upload successful
Uploading CACHE
100%
CACHE upload successful
Uploading IBL+PBL
100%
ERROR: Failed to confirm end of file transfer sequence!
IBL+PBL upload failed!
Ending session...
Rebooting device...
Click to expand...
Click to collapse
Please HELP me
What do I do from here??

Attached are the results I get when trying to use odin and trying to flash EZBASE.
I get further in flashing using heimdall. Without trying to sound n00b, can I not flash the bootloader to something that works???

battznz said:
Attached are the results I get when trying to use odin and trying to flash EZBASE.
I get further in flashing using heimdall. Without trying to sound n00b, can I not flash the bootloader to something that works???
Click to expand...
Click to collapse
try ezboot from My Android collections link below

xsenman said:
try ezboot from My Android collections link below
Click to expand...
Click to collapse
Hi, ive tried ezboot, still no luck, I get the same error message in odin. Grrr frustrating, seem to be throwing solutions at it but nothing is cracking it.
Is there a way i can do it through heimdall?? seems to get more done when trying to flash except the error i get above?? perhaps how to do a bootloader flash using heimdall not odin??
Thanks

battznz said:
Hi, ive tried ezboot, still no luck, I get the same error message in odin. Grrr frustrating, seem to be throwing solutions at it but nothing is cracking it.
Is there a way i can do it through heimdall?? seems to get more done when trying to flash except the error i get above?? perhaps how to do a bootloader flash using heimdall not odin??
Thanks
Click to expand...
Click to collapse
I think the solution to your problem has been found, and your phone is actually an M110S Anycall galaxy S..read this thread http://forum.xda-developers.com/showthread.php?t=1888319...so you need to use the M110S repair kit, download from Pit Stop, link below and flash as per guide or like this http://forum.xda-developers.com/showpost.php?p=28174768&postcount=4774

First of all I would like to thank you xsenman, your posts and guides on these forums have been a huge help. Going along with what you said in your last post, I have started downloading the repair kit, then hopefully do an official update for here (Australia).
I just want to add, you may want to add the the following as a solution to a lot of problems (it helped me verify).
I had a look at this thread:
http://forum.xda-developers.com/showpost.php?p=30797809&postcount=1
And about half way through the thread is IMEI check
I entered the IMEI from my phone (an official samsung gti9000), and it came back with a result saying exactly that.
I then entered the IMEI from my friends phone (bought from ebay >:/ go figure), and it came back saying it was M110S but so has it that the internal sticker on my friends phone says model: GT-i9000
If anyone else gets into a confusion like I have, which it is hard to tell if its fake or not. Posting/sticky the imei check will save a lot of time, heart ache and possibly from creating a $200 paper weight.
Once again thank you so much, hopefully this repair kit will work and the phone will be up and running.
:good:

Related

Bricked Captivate

My captivate wont start it just stalls at the AT&T screen when you boot it up, i have tried odin but the computer dosent read read the phone when its in download mode. i just got the phone lessed than 2 weeks ago. i was running eclair 2.1 and i need serious help i paid good money for this phone and i need help so can someone please help me please. im begging for any type of help. Reaspond ASAP!!!!! HELP PLEASE!!!!!!
There are a bunch of threads about bricked phones. Which ones have you read?
BookBaG said:
My captivate wont start it just stalls at the AT&T screen when you boot it up, i have tried odin but the computer dosent read read the phone when its in download mode. i just got the phone lessed than 2 weeks ago. i was running eclair 2.1 and i need serious help i paid good money for this phone and i need help so can someone please help me please. im begging for any type of help. Reaspond ASAP!!!!! HELP PLEASE!!!!!!
Click to expand...
Click to collapse
Read up more on odin. Some suggestions, make sure you are using the rear usb port. Right click odin and run as administrator. Read odin thread about different ways to enter download mode.
Did you flash anything, our are you just running stock? Where did you buy the phone?
Captivate
Cog 2.3b4
kegobeer said:
There are a bunch of threads about bricked phones. Which ones have you read?
Click to expand...
Click to collapse
basicly all of them when i put the phone into downloader mode odin dosent reconize the phone. but when i put the phone in recovery odin reconizes it but i still cant fix it because odin requires it to be in downloader mode
BookBaG said:
basicly all of them when i put the phone into downloader mode odin dosent reconize the phone. but when i put the phone in recovery odin reconizes it but i still cant fix it because odin requires it to be in downloader mode
Click to expand...
Click to collapse
Try other usb ports. Try another computer. Try running odin as administrator
Captivate
Cog 2.3b4
What did you do to your phone? Obviously it didn't just screw itself up.
kegobeer said:
What did you do to your phone? Obviously it didn't just screw itself up.
Click to expand...
Click to collapse
And if it did just all of a sudden go bat **** return it to where you purchased it. Or call samsung and send your phone to be reflashed. Odin can and will fix this 9 out of 10 times
Captivate
Cog 2.3b4
Ok pls listen carefully I tried this so many times you don't even have to do the 3 button combo.
When you are on the atnt screen plug your phone to the computer. When it recognize it, run the one click root and hit one click root and your phone should go to clockwork recovery (you should have cwm) and there is an option in cwm that can get you to download mode.
Sent from my T-Mobile G2 using XDA App
BookBaG said:
My captivate wont start it just stalls at the AT&T screen when you boot it up, i have tried odin but the computer dosent read read the phone when its in download mode. i just got the phone lessed than 2 weeks ago. i was running eclair 2.1 and i need serious help i paid good money for this phone and i need help so can someone please help me please. im begging for any type of help. Reaspond ASAP!!!!! HELP PLEASE!!!!!!
Click to expand...
Click to collapse
Did you make sure to open Odin "BEFORE" you plug your Captivate (in download mode).
I am presently having a very similar problem. My phone stalls at the ATT screen and none of the methods offered in the myriad of other threads has worked. I have tried all of the button combos, I have attempted the one-click, and I have let the screen flash 2-3 times before releasing the button, all of it has failed. I am at a point where a hard reset might be the answer, but I do not know if one exists. This afternoon I am getting the parts to attempt the 3ohm method.
I would appreciate any input or suggestion of a method I have not yet tried.
TIA
I wanted to mention too that when the phone is off and I plug it into a wall charger, the picture of the battery comes up with the little pinwheel, and stays. The pinwheel does not spin, nor does it go away.

[Q] Phone, Exclamation Triangle, PC - No Download mode

I'm really sorry, I searched for solutions but didnt found one that fits my problem.
I'm a total newbie and ****ed up my phone in many ways. I started trying to install something it wasnt suposed to work on my phone (rom destinated to 9000 and stuff). I have a Samsung Galaxy S GT-I9000b (sold to latin amarica) and came from factory with android 2.2.
I'm now stuck with the black screen of death, no matter what I do I get this screen. It hapened after I tryied to install unsucessfully the original rom of the phone and odin presented me with an error.
Before I try any further I'd like your advices as how to procede regarding my 9000b. Pulling the battery out, putting it in again and holding either vol down or both volumes and either pluging the phone on usb or pressing power allways gives me the same result, the screen with phone exclamation triangle and pc.
So, before I buy a jig cable on ebay that will probably take 3 weeks to get here (Brasil) is there anything else I can try?
Please help me, I'm desperate and I dont want to take it to assistence, it would cost me much money and ruin all my courage in trying to use Roms.
Thanks alot and sorry for the bad english.
so did you have the 3 button combination before this happened ??
have you tried to charge the phone whilst powered off, then when the phone gets hot, try download mode then ? sometimes this works, as heat can help download mode work.
another thing that has worked for SOME people, is leaving the battery out for 10mins, doing the 3 button combo, and whilst holding the 3 buttons, insert the battery.
you could try these and see what happens,
And 3 weeks delivery for the JIG is a long time, couldnt you make one in less that 3 weeks.
If you can't get into download mode, you are screwed until you get your hands on a jig, simple as that. Just wait. Patience is a virtue.
Thanks in advance for the quick reply guys, I ordered the jig, estimated 20 days, usualy it takes the same amount from the central postal ofice to my home since they allways restrict packages from hong kong. I'm considering making one but I'm a total denial in eletronics.
I was able to get to download mode before this problem yes. I would just hold down vol and center key and then power. Now even when I plug it in to charge I get the screen with the exclamation.
Any more sugestions?
no other suggestions other than whats listed above
looks like you will have to wait for the JIG to arrive.
Loner-phone here you come lol
Then I have a couple of questions.
1) Since I plut it in directly on the power and still recive the same screen is the phone still charging? Or once the battery is over I'm ****ed up twice?
2) Is there any chance that the jig wont work or I in some way ****ed up my I-9000b permanently?
3) After I make/get a jig how should I procede? I heard about one-click odin, but apears that its for another model of phone, and since I got on all this trouble exactly for trying to do things to my phone that were suposed to be only for another model, I'm kind of lost.
Inputs?
Thank you all for already awnsering my questions.
1) the system is corrupted so the charging indicator will be too - thus leading to Phone ! PC image - this is the only image the phone can now produce
2) The 'JIG' has a 100% success rate - providing that the motherboard is not fried - which it isnt as it still shows an image
3) the jig is just a modified USB, just plug it into the phone whilst powered off and download mode will appear, and then you just attach your genuine USB cable and flash stock ROM thru ODIN.
azzledazzle Thank you very much for your patience, but since I`m a total newbie to all this, some of your awnsers I didnt understood fully, do you care explain me better?
Regarding question 1) The power indicator is corrupted, ok. But this means if my battery die out of usage it wont charge again or just that the indicator wont show that is charging but the battery actualy is charging?
and for question 3) Is ther any tutorial directed to I-9000 on how to use odin to flash a stock ROM ? like baby steps? After all that I'm even afraid to turn the phone on, so I would like to know exactly what to do. I`m cosindering asking someone with technical skills to help me on a home made jig.
oh im sorry, i get carried away sometimes.
1) i assume the battery will be charging yes. only the phone will not be able to show this due to the corruption.
2) when you have made / bought a JIG (link below) you ideally want to flash a Stock ROM, you can get this from samfirmware (link below) and also on this site is a tutorial on how to use ODIN, its fairly easy if you just read the instructions provided.
JIG: http://forum.xda-developers.com/showthread.php?t=819551&page=3
Firmwares : www.samfirmware.com
ODIN download and guide : http://forum.xda-developers.com/showthread.php?t=846913
Its a miracle, somehow I managed to get into download mode. But I'm still a bit insecure
Here is the deal, I dowloaded a .tar file that alledgedly from my carrier and for my country. The tar is named JPA_JP3_JPA.
Inside the file there are cache.rfs factoryfs.rfs modem.bin param.lfs zimage
But what should I put where on ODIN if I only have PIT PDA PHONE and CSC?
And how can I discover if I should use pit 512 or 803?
Should I consider a master clear setting?
the file you downloaded is a full firmware compressed into 1 .tar file.
so in odin load the .tar file into PDA section and THATS IT !!
DO NOT USE PIT WITH THIS FILE.
press start and enjoy
PS do a factory reset after the flash
vongikking said:
I'm now stuck with the black screen of death, no matter what I do I get this screen. It hapened after I tryied to install unsucessfully the original rom of the phone and odin presented me with an error.
Click to expand...
Click to collapse
Hello all!
I've got my hands on a GT-I9000 today.
It's got 2.3.3 Android on it.
Wanting to install CM7, I was first of all trying to root it.
I'm on Mac OS X 10.6.8, thus I downloaded heimdall-frontend and the "Hardcore's SpeedMod kernel with ClockworkMod Recovery".
When I put my phone into DL Mode and connect it to my Mac, I can't write the image to it.
Heimdall is failing with "Failed to receive device info response!"
What do you ppl suggest me to do now?
Thanks,
F.
Try to flash with Windows!
Sent from hell to take your soul
Lunchbox115 said:
Try to flash with Windows!
Sent from hell to take your soul
Click to expand...
Click to collapse
Indeed I now managed to get Windows XP PC.
one trouble still remains: after rooting the device remains in an infinite reboot loop!!!
It only stops when WiFi is disabled.
Any help bout this?
Or at least any means to get back to a factory ROM?
I got 2.3.3 before flashing...
Thanks!
Try to flash the nightly again, should solve the bootloop-issue.
Or you can wipe cache/dalvik cache, this helped me too.
Lunchbox115 said:
Try to flash the nightly again, should solve the bootloop-issue.
Click to expand...
Click to collapse
Which nightly do you intend me to re-flash?
Or you can wipe cache/dalvik cache, this helped me too.
Click to expand...
Click to collapse
How do I achieve these two things?
Thanks,
F.
Just take the latest nightly. To wipe the cache/dalvik cache you have to boot into recovery (hold volume UP + home button + power button.
Sent from hell to take your soul

Galaxy Note fails while booting (yellow triangle)

Hi there.
I have a problem with my Samsung Galaxy Note since I wanted to make it rootable.
When I bought it, I could use any simcard inside, so it is "unlocked".
Yesterday, I wanted to use my phone to root it but some files can't be downloaded via WWW.MULTIUPLOAD.COM (i guess it is because of what happened to MEGAUPLOAD).
So, one of my first questions is : is USB DEBUGGING activated when using the Galaxy note for the first time or not at all? (I didn't activate it when using my Galaxy Note before flashing it)
Second, I have used Odin to flash a file (PDA slot), the file was hard to find but google could help (i'm just meaning that some links here seem to be "broken" on multiupload). The flash was fine and the phone boot back... to a yellow triangle.
No way to change it.
No backup from the rom, but I remember it is a KKA.
I 've looked in that thread ( http://forum.xda-developers.com/showthread.php?t=1350960) to find everything that could help me, but the file is no more on multiupload
I tried via that thread, too :
http://forum.xda-developers.com/showthread.php?t=1370156 , but the problem remains
Third, I don't have any jug usb to use and no CMW installed nor loaded.
Could a kernel help to solve the problem about the yellow triangle, using ODIN, or not? Or is it better to use a fully functionnal rom, as a KKA?
Any help/comment would be much appreciated
N.B : sorry for my english that can be "poor" sometimes :s
Can you exactly give the file name, which you have used to flash PDA section? and size of it
Titek said:
Hi there.
I have a problem with my Samsung Galaxy Note since I wanted to make it rootable.
When I bought it, I could use any simcard inside, so it is "unlocked".
Yesterday, I wanted to use my phone to root it but some files can't be downloaded via WWW.MULTIUPLOAD.COM (i guess it is because of what happened to MEGAUPLOAD).
So, one of my first questions is : is USB DEBUGGING activated when using the Galaxy note for the first time or not at all? (I didn't activate it when using my Galaxy Note before flashing it)
Second, I have used Odin to flash a file (PDA slot), the file was hard to find but google could help (i'm just meaning that some links here seem to be "broken" on multiupload). The flash was fine and the phone boot back... to a yellow triangle.
No way to change it.
No backup from the rom, but I remember it is a KKA.
I 've looked in that thread ( http://forum.xda-developers.com/showthread.php?t=1350960) to find everything that could help me, but the file is no more on multiupload
I tried via that thread, too :
http://forum.xda-developers.com/showthread.php?t=1370156 , but the problem remains
Third, I don't have any jug usb to use and no CMW installed nor loaded.
Could a kernel help to solve the problem about the yellow triangle, using ODIN, or not? Or is it better to use a fully functionnal rom, as a KKA?
Any help/comment would be much appreciated
N.B : sorry for my english that can be "poor" sometimes :s
Click to expand...
Click to collapse
1. It doesn't matter while flashing using PC Odin.
2. Are you sure about which ROM you flashed ( Suspecting you have flashed Custom ROM)
3. Their is way to remove Triangle (!) , you should use JIG
follow the link for more details.
http://forum.xda-developers.com/showthread.php?t=1354888
Thanks for your quick replies
So, I wanted to flash that, using ODIN:
Recovery ClockworkMod Odin flashable.Tar
But on XDA, the link about it is in fact Superuser-3.0.6-efgh-signed.zip.
Did I miss something??
The file I could find using google was about 8Mo and the flash was quite fast.
(I used it for the PDA part)
I also referred to that thread :
(http://forum.xda-developers.com/showthread.php?t=1329360)
dr.ketan said:
---------------------------------------------------------------------------------------------------------------
When No Any other method works to Root your device, use this
---------------------------------------------------------------------------------------------------------------
Note that, this will downgrade your ROM to KJ1, after that you can update it.
Download: http://www.multiupload.com/YB9EL8D8O3
- Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol down + Home + Power))
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin
Click to expand...
Click to collapse
using the file for KKA, but then, next flashing, the yellow triangle...
I'm working right now but I can repost here in a few hours the exact name of the file I have found using google that I could not find over here.
Anyway, do you think I can "repair" it without any JIG USB?
And yes, it was on a custom rom (the phone is just new, only a few hours in my hands ) but it's not my first one (i could flash a HD2 and the Samsung Tablet with no problems...
Titek said:
Thanks for your quick replies
So, I wanted to flash that, using ODIN:
Recovery ClockworkMod Odin flashable.Tar
But on XDA, the link about it is in fact Superuser-3.0.6-efgh-signed.zip.
Did I miss something??
Click to expand...
Click to collapse
This thing you did wrong, I have made lot effort to update Rooting guide here, still somebody How can find this guide i dont know.
Basically you have flashed with Netchip method, which was very first appeared, but later netchip also said, to not to use, b'coz it causing raise Flash counter
as well yellow triangle.
Now onwards remember, NEVER use PC ODIN to Flash Any Custome ROM/Kernel.
I am updating link here soon, how to reset your counter. You requires JIG for that
Edit : here is guide how to reset binaru count, n remove yellow triangle
http://forum.xda-developers.com/showthread.php?t=1354888
-------------------
BTW till you get JIG, just go to this thread http://forum.xda-developers.com/showthread.php?t=1424997 and download and flash ROM using PC odin(here it is stock ROM u can use it safely). you will get your phone working. later you can reset counter with JIG
Download my guide from here, how to update ROM, you can use Updating ROM with PC Odin section from guide.
Many thanks again, dr.ketan for such reply so fast
Hmmmm then I will have to wait for a JIG. I will order a JIG, it seems the price is not so expensive.
Thanks again for your comments and help, much appreciated
Ya jig is costing just 1-2 usd
Sent from my GT-N7000 using xda premium
dr.ketan said:
Ya jig is costing just 1-2 usd
Even you can make it at home, guide link is inside previous msg (how to use jig)
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sent from my GT-N7000 using xda premium
My 2 cents about that question, but if I have a message saying that there is an error while turning on the phone now :
Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.
The problem is, when using Kies (for Windows), it is looking for the Galaxy Note, and, even if it is connected via USB, nothing happens, it's looking long, long, long, time, then, it says that it can not find it.
So, is a JIG still required?
Titek said:
My 2 cents about that question, but if I have a message saying that there is an error while turning on the phone now :
Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.
The problem is, when using Kies (for Windows), it is looking for the Galaxy Note, and, even if it is connected via USB, nothing happens, it's looking long, long, long, time, then, it says that it can not find it.
So, is a JIG still required?
Click to expand...
Click to collapse
See, JIG is required for totally different reason.
Your issue regarding, not connecting kies / Booting phone, won't be solved by JIG.
Jig can b use in two condition. One when you are unable to enter in download mode. I think, you dont have this issue
another To reset counter, for which you require JIG in your case.
Error you are facing right now during booting of device, can be solved by Reflashing ROM. You can flash any stock ROM with PC Odin, shud be enough to solve it.
Now regarding use of JIG, just enter in download mode, check Lt upper corner of devoce, it will have number of flash you have performed, i think in your case it must be 1 or more. which in normal case should be zero. Only To reset that counter, you needs Jig.
Thanks again.
Well, I download another stock rom but I got a "fail" (red color) above "id:com", when flashing on ODIN.
I am using Windows7 and tested the compatibility mode, the problem remains.
I have .md5 file that I put on PDA part. Then I click on Start but nothing, except the "fail" message.
When turning off the phone and on, I got the other message, said in my previous post :
"Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again."
So, Am I missing something.
About the download mode, the number is 7 in fact.
Oh I remember the file I wanted to flash via ODIN : netchip-cwm-update2.tar
It seemed to work just because the phone turned off and I got a "green" message that said that it was ok. (PASS).
I read one of your thread, when nothing works, so that man should go here :
http://forum.xda-developers.com/showpost.php?p=18981227&postcount=4
but the file (link) is not working now, so I can not get the file to test :s
But since then, I can not boot on Android anymore...
Yes unfortunately link is down since 2 days
Ya thats i guessed when i read you have used superuser zip, i have said earlier in 1 msg, you have used netchip.
Anyway, once go to recovery (vol up +home+power)n wipe data, clear cache, clear dwlvic caxhe.
Then put phone in download mode. Close firewall/antivirus on pc, open odin, connect device with download mode(vol down+home+power), if id com glow yellow, thn proceed with start
Gudluck
Sent from my GT-N7000 using xda premium
The main problem is that, too.
I can not enter Recovery, I got the yellow triangle.
I can only go in download mode, and when turning off and on the phone, the message said above :s
is JIG the only way to solve all that?
is my phone "blocked"? I am trying to test another stock rom, I'll give it a try and let you guess what happens.
EDIT 22:37:
The flash with that rom (N7000XXLA4_N7000DREKL1_DRE) has failed, even if it is a stock one.
Can I try to use any other rom from another country? Before I tried to flash the rom, I saw it was a KKA. Can I try so with a LA3 or something else, still stock one?
Oh man, that's so bad....
I think I found the problem...
I am using Windows7 64 bits.
My wife is on WindowsXP and I am using Odin on her netbook, and it's quite better !
the flashing is going on.
Hey !!!! that's all good !!!!! ^^'
My Galaxy Notes is working again ^'^'
Maybe should it be mentionned to be careful when using Windows7 64 bits, if some other members would have the same problem when flashing their roms?
Congrates !
ya it is common problem(win7), many time it has been discussed , but it is not that everytime it not works, but it happens in few cases.
When reading your answer yesterday, I thought I might had a chance to make my Galaxy Note working again without JIG.
Now I've downloaded Samsung drivers, for Windows7 64 bits, and I can flash with no problem. I'm backing up and can use CWM
Thanks again for your help and answers
I had the same problem, but then I decided to use the ORIGINAL usb cable and see: it did the trick !!!. Even on Windows 10 64bit !.

[Q] Help Needed in Unbricking Samsung Galaxy Pop (GT S5570)

Please help me out on this....
(Sorry if I posted in wrong section)
I successfully upgraded my Pop to gingerbread 2.3.6 and rooted it. It was working fine for some days after which It got messed up
when I updated the titanium backup app from the market. The app asked for some su permissions and suddenly the screen went blank.
After that I realized that its a hard bricked. The screen is blank whatever I do. I searched for many tutorials to unbrick it but no fruitful results yet.
I tried a lot to enter download mode and after several attempts luckily the three button combo worked and it got shown in ODIN on some port connected.
When I started the process of firmware upgrade it gets stuck in "Connection Setup Phase".
Does USB Jig method is worth trying in this situation ??
Pease tell me the solution of it. I am attaching the screenshot of the ODIN. Please Please Please help.
Thanks a lot in advance...
what is on your mobile screen download mode or something like phone--!--computer picture
ok whatever try this
close Odin, turn off mobile, start Odin and put files turn on mobile in download mode connect the cable and start flashing
PS : phone--!--conputer shows on the screen when upgrade get fail, not to worry it is just like another version of Odin
until you can light up the mobile its not a hard brick
I will suggest you to use firmware which are available without bootloader as you were previously on gb, just to remove the risk of hard brick
nothing on screen
yagnesh55 said:
Please help me out on this....
(Sorry if I posted in wrong section)
I successfully upgraded my Pop to gingerbread 2.3.6 and rooted it. It was working fine for some days after which It got messed up
when I updated the titanium backup app from the market. The app asked for some su permissions and suddenly the screen went blank.
After that I realized that its a hard bricked. The screen is blank whatever I do. I searched for many tutorials to unbrick it but no fruitful results yet.
I tried a lot to enter download mode and after several attempts luckily the three button combo worked and it got shown in ODIN on some port connected.
When I started the process of firmware upgrade it gets stuck in "Connection Setup Phase".
Does USB Jig method is worth trying in this situation ??
Pease tell me the solution of it. I am attaching the screenshot of the ODIN. Please Please Please help.
Thanks a lot in advance...
Click to expand...
Click to collapse
dheeraj (dhlalit11) said:
what is on your mobile screen download mode or something like phone--!--computer picture
ok whatever try this
close Odin, turn off mobile, start Odin and put files turn on mobile in download mode connect the cable and start flashing
PS : phone--!--conputer shows on the screen when upgrade get fail, not to worry it is just like another version of Odin
until you can light up the mobile its not a hard brick
I will suggest you to use firmware which are available without bootloader as you were previously on gb, just to remove the risk of hard brick
Click to expand...
Click to collapse
There is nothing shown on my screen...
no computer like symbol....
nothing whatever i do...
It just goes sometimes in download mode when the 3 button combos is pressed (very rarely), gets detected by ODIN but stucks on connection error...
yagnesh55 said:
There is nothing shown on my screen...
no computer like symbol....
nothing whatever i do...
It just goes sometimes in download mode when the 3 button combos is pressed (very rarely), gets detected by ODIN but stucks on connection error...
Click to expand...
Click to collapse
First of all delet all drivers on pc and install them new, just to be on the save side! Then get firmware for your country i suggest you to use 4file pack no the 1file ones! Then get odin v4.38 put your device in download mode and conect to pc put all 4files in the right place in odin and start flashing!! It should not take longer then 6min!! Let odin finish when you see blue pass disconect and be lucky!!
Sent from my GT-S5570 using xda premium
It Doesnt Help
galaxy mini said:
First of all delet all drivers on pc and install them new, just to be on the save side! Then get firmware for your country i suggest you to use 4file pack no the 1file ones! Then get odin v4.38 put your device in download mode and conect to pc put all 4files in the right place in odin and start flashing!! It should not take longer then 6min!! Let odin finish when you see blue pass disconect and be lucky!!
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
I tried this thing many times but still ODIN stucks on connection setup...
Also tried on different machine...
Please help....
yagnesh55 said:
I tried this thing many times but still ODIN stucks on connection setup...
Also tried on different machine...
Please help....
Click to expand...
Click to collapse
Have you tried using a different port? Or a different cable? Also, try unchecking the reset time option on ODIN.
tietganFTW said:
Have you tried using a different port? Or a different cable? Also, try unchecking the reset time option on ODIN.
Click to expand...
Click to collapse
there are two data cables of the same shape but their holes (which goes in mobile port) are of different size try the data cable whose hole is much big
I will try to post a pic
in short use the original Samsung one
1st try flashing cwm via odin n then wipe data wipe sd partition n then go to stock rom via odin
Flash Stock Rom for ur device using odin..... Please do not do any thing you area not aware of..
Files the steps and will make ur device ok
Click THANKS button if I helped, or u liked my post.
Will be honored.
dheeraj (dhlalit11) said:
there are two data cables of the same shape but their holes (which goes in mobile port) are of different size try the data cable whose hole is much big
I will try to post a pic
in short use the original Samsung one
Click to expand...
Click to collapse
ya I got ur point regarding the port size...
I m using the port of samsung original having big hole....
sanjay.ghanchi said:
1st try flashing cwm via odin n then wipe data wipe sd partition n then go to stock rom via odin
Click to expand...
Click to collapse
The screen is completely blank whatever I do so I cant do these steps ....
debanikonline said:
Flash Stock Rom for ur device using odin..... Please do not do any thing you area not aware of..
Files the steps and will make ur device ok
Click THANKS button if I helped, or u liked my post.
Will be honored.
Click to expand...
Click to collapse
Ya m flashing stock ROM using ODIN but it gets stuck on connection setup stage forever (see attached file)...
Please help...
Anyone having idea if USB jig work in this case...
yagnesh55 said:
Anyone having idea if USB jig work in this case...
Click to expand...
Click to collapse
USB jig only boots mobile in download mode
but you are saying you can sometimes boot in download mode so no use of USB jig is required
you should take it to samsung
Weird. I dont know how you could brick your phone with titanium backup app.
Your battery could be dead. Charge your phone for 2 hours.
Then try using Odin using a different USB Port.
chemicalrage said:
Weird. I dont know how you could brick your phone with titanium backup app.
Your battery could be dead. Charge your phone for 2 hours.
Then try using Odin using a different USB Port.
Click to expand...
Click to collapse
Nop I charged my battery full with another battery charger before using ODIN but still the problem persist.
I think I have to take it to Samsung service center but my warranty is over so I think they will take a huge amount
to fix it.
Anyone still having some idea on this...
Pease help...
yagnesh55 said:
Nop I charged my battery full with another battery charger before using ODIN but still the problem persist.
I think I have to take it to Samsung service center but my warranty is over so I think they will take a huge amount
to fix it.
Anyone still having some idea on this...
Pease help...
Click to expand...
Click to collapse
Dude We are On the Same Boat I Tryed Searching With All My resources But Now There Is Only 1 Option Left for Me to Visit to a Service Center
Service Centre Sucks
amxthan0 said:
Dude We are On the Same Boat I Tryed Searching With All My resources But Now There Is Only 1 Option Left for Me to Visit to a Service Center
Click to expand...
Click to collapse
I gave my phone to service centre (warranty is over ) before few days and they told than some connector in the circuit is damaaged and need to be replaced with new
one and its cost is 4278 INR . Can u believe that ??? 4278 bucks. Its better to buy a new phone.
yagnesh55 said:
I gave my phone to service centre (warranty is over ) before few days and they told than some connector in the circuit is damaaged and need to be replaced with new
one and its cost is 4278 INR . Can u believe that ??? 4278 bucks. Its better to buy a new phone.
Click to expand...
Click to collapse
You should have tried another stock firmware or another USB port when your phone luckily entered download mode. Same problem happene with me & get solved by flashing another stock firmware.
Sent Via XDA™ Premium
Galaxy_Rohit said:
You should have tried another stock firmware or another USB port when your phone luckily entered download mode. Same problem happene with me & get solved by flashing another stock firmware.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
Tried every damn thing but ODIN gets stuck on connection setup step....

Firmware Upgrade fail Try using recovery mode i897! HELP!!!

Hello Guys!
I got Samsung Galaxy S Captivate and I've been using my phone since 2 years perfectly no problem but last week my phone suddenly stop working I was using HELLYBEAN on my captivate and it was working fine but then my phone stopped working and after that whenever I tried to install different Rom it was saying "Installation Aborted" after getting same errors with different roms, I decided to go back to Stock and everything went successful but after I tired to power on my phone it kept going to recovery mode and it was saying "E:failed to mount /sdcard" but after few time restarting my phone, I made it to the AT&T logo but unfortunately my phone kept on restarting after AT&T logo, so to get rid of that I tired to follow this steps from this website and actually lost my phone completely NOW!
http://blog.kalpetros.com/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
I tried to install .Tar with Odin but failed and After that I lost my phone completely and my phone started saying "Firmware Upgrade fail Try using recovery mode" Can someone help me with this please and I'm not able to get into download mode NOW! whenever I try to get into download mode and plug USB cable with holding the Volume + and - my phone shows the same error and can't get into download or recovery mode can someone PLEASE Help me! Please! I really want my phone back! :crying:
Here is the Error which I'm getting whenever I try to get into Download mode or plug USB cable *Attachment*
Thank You
Looking forward to kind replies!
ShahX said:
Hello Guys!
I got Samsung Galaxy S Captivate and I've been using my phone since 2 years perfectly no problem but last week my phone suddenly stop working I was using HELLYBEAN on my captivate and it was working fine but then my phone stopped working and after that whenever I tried to install different Rom it was saying "Installation Aborted" after getting same errors with different roms, I decided to go back to Stock and everything went successful but after I tired to power on my phone it kept going to recovery mode and it was saying "E:failed to mount /sdcard" but after few time restarting my phone, I made it to the AT&T logo but unfortunately my phone kept on restarting after AT&T logo, so to get rid of that I tired to follow this steps from this website and actually lost my phone completely NOW!
http://blog.kalpetros.com/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
I tried to install .Tar with Odin but failed and After that I lost my phone completely and my phone started saying "Firmware Upgrade fail Try using recovery mode" Can someone help me with this please and I'm not able to get into download mode NOW! whenever I try to get into download mode and plug USB cable with holding the Volume + and - my phone shows the same error and can't get into download or recovery mode can someone PLEASE Help me! Please! I really want my phone back! :crying:
Here is the Error which I'm getting whenever I try to get into Download mode or plug USB cable *Attachment*
Thank You
Looking forward to kind replies!
Click to expand...
Click to collapse
The imaged you linked is considered a download mode, you should be able to flash from it.
That being said, the error you got often means your internal memory is dead. Which also means that you can't get what was on it (Think of it as a hard drive that just died). Your best bet after trying to flash stock would be to partition an SD card and run from it (there's a guide on how to do it on here).
BWolf56 said:
The imaged you linked is considered a download mode, you should be able to flash from it.
That being said, the error you got often means your internal memory is dead. Which also means that you can't get what was on it (Think of it as a hard drive that just died). Your best bet after trying to flash stock would be to partition an SD card and run from it (there's a guide on how to do it on here).
Click to expand...
Click to collapse
Thanks for your reply bro, but the thing is My Computer don't detect my phone neither my phone appears on my computer! Not even with Odin I tried but Failed Anyway to Flash back to any other ROM just to get my phone working! Please?
Thank You.
ShahX said:
Thanks for your reply bro, but the thing is My Computer don't detect my phone neither my phone appears on my computer! Not even with Odin I tried but Failed Anyway to Flash back to any other ROM just to get my phone working! Please?
Thank You.
Click to expand...
Click to collapse
Try reinstalling your drivers to get your phone connected.
But I'm pretty sure you'll have to partition an SD card. Your internal memory sounds dead.
Amazing Reply! but Still need help
BWolf56 said:
Try reinstalling your drivers to get your phone connected.
But I'm pretty sure you'll have to partition an SD card. Your internal memory sounds dead.
Click to expand...
Click to collapse
thankyou bro for an amazing reply! I actually worked it out my computer detected my phone even Odin did, but can you please tell me what to do next? like How do I flash my phone back to stock rom or get into the CWM boot loader cuz whenever I try to get into recovery or press any key or connect my cable my phone automatically gets into that same screen the one I showed you above! Please bro help, it's been ages since I haven't used my phone..
Thank You!
ShahX said:
thankyou bro for an amazing reply! I actually worked it out my computer detected my phone even Odin did, but can you please tell me what to do next? like How do I flash my phone back to stock rom or get into the CWM boot loader cuz whenever I try to get into recovery or press any key or connect my cable my phone automatically gets into that same screen the one I showed you above! Please bro help, it's been ages since I haven't used my phone..
Thank You!
Click to expand...
Click to collapse
You gotta do some basic research. Here's the stock ROM (without bootloaders): http://www.mediafire.com/download/w..., NO Bootloaders, Re-partition, Full Wipe.zip
Just loat it up on Odin and flash away. You can't get in recovery cause your phone can't load anything atm, it needs a clean flash. Just make sure nothing interrupts Odin while it's flashing.
Almost Done
BWolf56 said:
You gotta do some basic research. Here's the stock ROM (without bootloaders): http://www.mediafire.com/download/w..., NO Bootloaders, Re-partition, Full Wipe.zip
Just loat it up on Odin and flash away. You can't get in recovery cause your phone can't load anything atm, it needs a clean flash. Just make sure nothing interrupts Odin while it's flashing.
Click to expand...
Click to collapse
Thanks for your kind reply again bro, I did everything as you said but unfortunately my Odin got stuck on zImage but the phone was showing blue line under written "loading" basically it was stuck at one point and wasn't moving forward so I disconnected my phone and tried to connect again but nothing showed up so I tired to get into download mode and fortunately I GOT into the download mode the one I used to get when my phone was working "Yellow with Andriod Logo" so after getting into download mode I tired to flash the stock Rom the one you gave me but got can't get through it got stuck on factoryfs.rfs? or should I give it more time, it's been 10 mins already...Any Help?
thankyou sooo much for your help
ShahX said:
Thanks for your kind reply again bro, I did everything as you said but unfortunately my Odin got stuck on zImage but the phone was showing blue line under written "loading" basically it was stuck at one point and wasn't moving forward so I disconnected my phone and tried to connect again but nothing showed up so I tired to get into download mode and fortunately I GOT into the download mode the one I used to get when my phone was working "Yellow with Andriod Logo" so after getting into download mode I tired to flash the stock Rom the one you gave me but got can't get through it got stuck on factoryfs.rfs? or should I give it more time, it's been 10 mins already...Any Help?
thankyou sooo much for your help
Click to expand...
Click to collapse
You can give Heimdall a shot (note that it will install its own drivers on the usb port you'll use it on so Odin won't work on it): http://www.mediafire.com/download/5..., NO Bootloaders, Wipe-Heimdall One-Click.zip
If that doesn't work, I can say at like 95% that your internal memory is dead and you'll have to partition an SD card if you wanna get it running. There are guides on how to do it on here.
I've seen that image often. Uninstalling then re-installing the usb drivers for Samsung helped me. Flashing a captivate can be a little convoluted granted all the different methods of acquiring root and flashing a rom that's been used through the years ... and subsequently posted somewhere on the internet. I'd suggest the following .... once your device is recognized in Odin.
1. Flash I897UCKK4 with Odin (no root) for gingerbread stock rom
2. Download and install KK4root. Run Kk4 root "run" exe in the kk4_root folder. Corn kernel is installed with modded recovery system
3. From Corn kernel recovery click "root extras" to get su and busy box installed

Categories

Resources