Bricked Captivate - Captivate Q&A, Help & Troubleshooting

My captivate wont start it just stalls at the AT&T screen when you boot it up, i have tried odin but the computer dosent read read the phone when its in download mode. i just got the phone lessed than 2 weeks ago. i was running eclair 2.1 and i need serious help i paid good money for this phone and i need help so can someone please help me please. im begging for any type of help. Reaspond ASAP!!!!! HELP PLEASE!!!!!!

There are a bunch of threads about bricked phones. Which ones have you read?

BookBaG said:
My captivate wont start it just stalls at the AT&T screen when you boot it up, i have tried odin but the computer dosent read read the phone when its in download mode. i just got the phone lessed than 2 weeks ago. i was running eclair 2.1 and i need serious help i paid good money for this phone and i need help so can someone please help me please. im begging for any type of help. Reaspond ASAP!!!!! HELP PLEASE!!!!!!
Click to expand...
Click to collapse
Read up more on odin. Some suggestions, make sure you are using the rear usb port. Right click odin and run as administrator. Read odin thread about different ways to enter download mode.
Did you flash anything, our are you just running stock? Where did you buy the phone?
Captivate
Cog 2.3b4

kegobeer said:
There are a bunch of threads about bricked phones. Which ones have you read?
Click to expand...
Click to collapse
basicly all of them when i put the phone into downloader mode odin dosent reconize the phone. but when i put the phone in recovery odin reconizes it but i still cant fix it because odin requires it to be in downloader mode

BookBaG said:
basicly all of them when i put the phone into downloader mode odin dosent reconize the phone. but when i put the phone in recovery odin reconizes it but i still cant fix it because odin requires it to be in downloader mode
Click to expand...
Click to collapse
Try other usb ports. Try another computer. Try running odin as administrator
Captivate
Cog 2.3b4

What did you do to your phone? Obviously it didn't just screw itself up.

kegobeer said:
What did you do to your phone? Obviously it didn't just screw itself up.
Click to expand...
Click to collapse
And if it did just all of a sudden go bat **** return it to where you purchased it. Or call samsung and send your phone to be reflashed. Odin can and will fix this 9 out of 10 times
Captivate
Cog 2.3b4

Ok pls listen carefully I tried this so many times you don't even have to do the 3 button combo.
When you are on the atnt screen plug your phone to the computer. When it recognize it, run the one click root and hit one click root and your phone should go to clockwork recovery (you should have cwm) and there is an option in cwm that can get you to download mode.
Sent from my T-Mobile G2 using XDA App

BookBaG said:
My captivate wont start it just stalls at the AT&T screen when you boot it up, i have tried odin but the computer dosent read read the phone when its in download mode. i just got the phone lessed than 2 weeks ago. i was running eclair 2.1 and i need serious help i paid good money for this phone and i need help so can someone please help me please. im begging for any type of help. Reaspond ASAP!!!!! HELP PLEASE!!!!!!
Click to expand...
Click to collapse
Did you make sure to open Odin "BEFORE" you plug your Captivate (in download mode).

I am presently having a very similar problem. My phone stalls at the ATT screen and none of the methods offered in the myriad of other threads has worked. I have tried all of the button combos, I have attempted the one-click, and I have let the screen flash 2-3 times before releasing the button, all of it has failed. I am at a point where a hard reset might be the answer, but I do not know if one exists. This afternoon I am getting the parts to attempt the 3ohm method.
I would appreciate any input or suggestion of a method I have not yet tried.
TIA
I wanted to mention too that when the phone is off and I plug it into a wall charger, the picture of the battery comes up with the little pinwheel, and stays. The pinwheel does not spin, nor does it go away.

Related

Stuck in a boot loop.... no recovery/download mode

Hey all, just got my Captivate 2 weeks ago and successfully rooted and flashed with custom ROM following the directions on all the posts here. Last night, while attempting to switch from Paragon 3.0 to Phoenix 4.0, installation was aborted. After several unsuccessful recovery attempts through CWM, I finally followed directions and used Odin-one-click. Odin did its thing and phone rebooted immediately and got stuck in a loop.
ATT screen flashes on and off when phone is powered on. When plugged into PC, phone flashes empty battery and computer does not see the phone. I've tried just about every button combination I've come across and about every permutation of button/battery/USB/Odin combination on the PC to no avail.
Is my last resort the USB jig? Or are there other options? Any and all help would be appreciated. And thank you to all of you whose posts I used to get me this far.
Patiently awaiting any assistance......
If you can't get into dl mode a jig will be needed
Have you used odin before?
Do you know your build number
mcord11758 said:
If you can't get into dl mode a jig will be needed
Have you used odin before?
Do you know your build number
Click to expand...
Click to collapse
Build number.... inside of the phone I see 1010, REV 0.4
Is that what you were referring to?
Yes and that is what caused your odin problem
Read this
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Go to radio shack get a package of 100 k ohm resisters. Three twisted together in a tear drop shape. Touch the ends to the last 2 potions prongs closest to the head set jack. I have done this, it works.
http://forum.xda-developers.com/showthread.php?t=889128
Just in case this is how I enter dl mode
Take out sim, ext sd, and bat. In your case leave the bat out for like 10 minutes.
Put bat back in
Hold vol up and down
While holding plug in usb
maxyz said:
Hey all, just got my Captivate 2 weeks ago and successfully rooted and flashed with custom ROM following the directions on all the posts here. Last night, while attempting to switch from Paragon 3.0 to Phoenix 4.0, installation was aborted. After several unsuccessful recovery attempts through CWM, I finally followed directions and used Odin-one-click. Odin did its thing and phone rebooted immediately and got stuck in a loop.
ATT screen flashes on and off when phone is powered on. When plugged into PC, phone flashes empty battery and computer does not see the phone. I've tried just about every button combination I've come across and about every permutation of button/battery/USB/Odin combination on the PC to no avail.
Is my last resort the USB jig? Or are there other options? Any and all help would be appreciated. And thank you to all of you whose posts I used to get me this far.
Patiently awaiting any assistance......
Click to expand...
Click to collapse
Not sure if this is how you got into this situation in the first place, but did you disable the lagfix before flashing? If not, it may be what caused this.
mcord11758 said:
Just in case this is how I enter dl mode
Take out sim, ext sd, and bat. In your case leave the bat out for like 10 minutes.
Put bat back in
Hold vol up and down
While holding plug in usb
Click to expand...
Click to collapse
Thanks for the quick replies and assistance. The threads above were a revelation, I will try again to get it into download mode before making the jig. Keep your fingers crossed....
Gr8Danes said:
Not sure if this is how you got into this situation in the first place, but did you disable the lagfix before flashing? If not, it may be what caused this.
Click to expand...
Click to collapse
Did I disable the lagfix? I believe I did, I at least was cognizant of having to disable the lagfix, but it certainly is a possibility. Thanks for chiming in, appreciate all of it.
Someone please help
So I just tried to root my samsung fascinate 2.3.5 and i did the ODIN stock voodoo T959VKJ1.tar file using the PDA button and now my phone is stuck in boot mode and wont boot up properly. Please give me any steps to at least fix this to the original version.
b.smith1202 said:
So I just tried to root my samsung fascinate 2.3.5 and i did the ODIN stock voodoo T959VKJ1.tar file using the PDA button and now my phone is stuck in boot mode and wont boot up properly. Please give me any steps to at least fix this to the original version.
Click to expand...
Click to collapse
This is the captivate section not fascinate.
Sent from my SGH-I897 using xda premium

[Q] Captivate Boot Loop after Odin one click

Hello all and thx in advance.
ATT Captivate batch 1010
I had Cognition 2.3 I think on my phone and it worked great however I wanted to try a different ROM so I attempted to restore my phone to stock using ODIN one click. I realized after that that I never disabled the voodoo lag fix or deleted my user data.
Now I am stuck in a boot loop that either shows the white ATT logo screen flashing every couple seconds or the phone off charge screen re starting every couple seconds.
I bought a USB Jig and it works great so I can get into D/L mode easily but I have tried flashing the stock firmware at least 6 times now using different machines, different ports, different versions of ODIN and I've searched around these forums and others for several hours trying to find a solution. It seems that I needed to erase my user data in recovery mode and removed the lag fix before I did this but it is what it is. I have tried to get to recovery mode to no avail. All I can get to is download mode.
Any ideas on what I should/can do?
any help will be greatly appreciated.
Rob
Aircraft123 said:
I realized after that that I never disabled the voodoo lag fix or deleted my user data.
Click to expand...
Click to collapse
Neither are necessary for Odin use.
ATT Captivate batch 1010
Click to expand...
Click to collapse
I think that you may need to use the Froyo Odin (JI6).
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
CM7
please help, i have the same problem, was flashing back to stock from a serendipit 5.12 so that i could get the 6.0 version... all went as planned until odin said "reset" which was my cue to unplug and that the process was complete.... i unplugged the phone and tried to reboot and now it does exactly as the first post described, at&t logo then black screen, then back to the at&t logo then black screen again... my computer doesnt recognize my phone none of the methods of getting to download screen will work... no matter how many times i pull the sd, sim, and batt, no matter the button combination i use or which order i use them in.... same result... i cant afford a new phone i need help, i will donate also... i knew this stuff was over my head, but "curiosity killed the cat" i guess...
I had the exact same problem. Try this method, it's the one that worked for me when all others failed... But remember to follow it EXACTLY.
1. Pull out the battery.
2. Hold Volume UP+DOWN (Don't let go of them until you see the download screen).
3. Stick in the USB (which is connected to the computer).
4. Put the battery back in.
If not, you might need to get a USB Jig.
That Froyo Odin link worked!
Thanks guys I flashed to Froyo and it worked!
I've since flashed clockwork recovery and gotten Serendipity 6.1
As far as getting into download mode I had to use one of the USB jigs.
I ordered one from the guy who does the rom reviews but you could make one as well.
On another note the new ROM seems to be discharging my battery really fast
Before I start investigating it as a problem I am going to charge it completely then let it discharge completely to calibrate it.
Thanks again guys
Rob
I just fixed mine last night, I had the exact same problem because of the exact same upgrade. What you need to do is get or make a usb jig. There's a couple resources around here for how to do it.
Here's a video showing how to make one:
http://www.youtube.com/watch?v=Rdn5GoRjhn0
Once I got my phone into download mode, I used Darky's ROM Resurrection Edition ( http://forum.xda-developers.com/showthread.php?t=940671 ) to restore my phone. Just scroll down to where it says "Files Needed" and download the Captivate version. Once you have that downloaded, use the jig to put your phone into download mode and follow the directions in the Darky's video (jump to about 2:30 into the video). Once I had my phone booting, I used clockwork to install Serendipity 6.
Hope that helps you as much as it helped me!!
went to radio shack, got all the stuff to make a jig and i was able to get my phone into download mode! now to try darko...... thanks everyone!
odin doesnt reconize phone
which odin3 are you using? 1.7? or the one click to stock?
you mentioned you had the bootloop problem before, so you should be using odin 1.7 with 2.2 stock.
open odin
get phone into download mode with your nice jig
unplug jig and plug in computer
box in odin should turn yellow.
And make sure you have the correct drivers installed. CRUCIAL.
Multiupload links not working
I'm stuck in the same situation as the OP.
I've been trying to use the method mentioned in the quote below, but the multiupload links are not working for me. I've been trying for 2 days to get to these files.
Breakin' Ranh said:
**Another thing, read the whole thing before doing it! If you're not confident whatsoever about this process, don't do it**
1. Download the following:
I897UCJH2 Firmware
password: samsung-firmwares.com
http://www.multiupload.com/B5OFPPOJFZ
512 PIT
http://www.multiupload.com/I5WICSBFJ1
ODIN3
http://www.multiupload.com/DLS7TWUVPY
Click to expand...
Click to collapse
Here's a link to the thread for more clarification:
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36I've
Would anyone happen to have these files and be willing to share them?
^
Have u tried the Odin or Heimdall One Clicks in the development stickied thread ??
Sent by XDA Premium App
Yep, tried the Odin one click - caught in a boot loop with the AT&T Logo. I have yet to try the Heimdall one.
UPDATE
Tried Odin and Heimdall One-Clicks - unsuccessful. I'm think I will need the stock Eclair firmware file with Odin and the pit file.
lllll Nova lllll said:
Yep, tried the Odin one click - caught in a boot loop with the AT&T Logo. I have yet to try the Heimdall one.
UPDATE
Tried Odin and Heimdall One-Clicks - unsuccessful. I'm think I will need the stock Eclair firmware file with Odin and the pit file.
Click to expand...
Click to collapse
You ever get this to work? - I'm in a similar situation. all flashes 'work' but get stuck at ATT on boot. Not sure Eclair is an option or not since mine is a refurbished phone that started on 2.2
ScruffMcG said:
You ever get this to work? - I'm in a similar situation. all flashes 'work' but get stuck at ATT on boot. Not sure Eclair is an option or not since mine is a refurbished phone that started on 2.2
Click to expand...
Click to collapse
If one-clicks aren't working, you might need to grab the full version of Heimdall or Odin and flash a full package. Some of the newer phone builds don't like one-clicks.
^ +1
See this thread...the original Stock i897ucKK4 thread... http://forum.xda-developers.com/showthread.php?p=19587108
Then see post #57 for the regular Odin to use and instructions on what to do with the firmware.
Sent from my SAMSUNG-SGH-I777 using xda premium

BRICKED 1st post edited.

EDIT:
odin crashed while going back to stock then
my phone will get to download mode buuuuut.. my computer doesnt recognize my phone...
i re-downloaded drivers and the phone is recognized however odin failed the 2 times i got it in dl mode(took about an hour to get it each time)... so i have a jig ordered but with odin not working im not feeling optimistic
nothing seems to happen when its plugged into the wall no battery icon. i reinstalled drivers hoping that would help with no luck.. i just got it back in dl mode after like an hour of it not turning on for me but it doesnt do anything once i get it there.
Get odin3 one click and use it in dl mode. It will brg ur phone back to stock
Sent from my SAMSUNG-SGH-I897 using XDA App
definately problem of bad USB..either cable or port....try using different USB cable or different computer....Use full odin by iCezar...its with minimum risk....specially very beneficial in cases like yours....
my pc doesnt see my phone. thats the issue i cant use odin. and the only thing my phone will do is glow black or go to download mode, idk if its charging but its getting hard to get it in dl mode, multiple tries atm no luck
i have already tried reinstalling the drivers. what are they called so i can delete them and install again rather then just redownload maybe that will help?
.
donks232 said:
my pc doesnt see my phone. thats the issue i can use odin
i have already tried reinstalling the drivers. what are they called so i can delete them and install again rather then just redownload maybe that will help?
.
Click to expand...
Click to collapse
did you always had this problem or just when in DL mode? if you always had this problem then ofcourse something wrong with USB port...but if its only for DL mode then u remove and redownload drivers....
viny2cool said:
did you always had this problem or just when in DL mode? if you always had this problem then ofcourse something wrong with USB port...but if its only for DL mode then u remove and redownload drivers....
Click to expand...
Click to collapse
nope this only happened AFTER my crash on odin. my pc has always seen the phone.
try connecting your phone to pc when odin is already running. See whether it detects. Mine worked this way.
bigbyte.me said:
try connecting your phone to pc when odin is already running. See whether it detects. Mine worked this way.
Click to expand...
Click to collapse
i tried that once of twice
need help
ive got this error after tryimg to bring my phone back to 2.1. any one please help me, my email is [email protected]. igot an error with a black background and showing caution sign between a phone and a computer maybe its brick, need help.
thank you so much for your help.
sorry idont know where to put this.
jvmiralles said:
ive got this error after tryimg to bring my phone back to 2.1. any one please help me, my email is [email protected]. igot an error with a black background and showing caution sign between a phone and a computer maybe its brick, need help.
thank you so much for your help.
sorry idont know where to put this.
Click to expand...
Click to collapse
thats not a big deal, just get it in download mode, and flash it with odin.
EDIT: might as well us this post to say what my computer says with usb since i got in in dl mode again...
USB device not recognized
one of the usb devices attached to this computer has
malfunctioned, and windows does not recognize it.
then something about for assistance in solving this issue click here
this has happened to me acouple times, the first was my fault I pull the usb before odin finished. I could get back into Download mode but Odin would not see the phone and computer would not recognize the phone either, device not recognized.
I tried rebooting, re-installing drivers etc. did not work.
but after an hour or so I finally got it to recognize and odin'd back to stock and back to flashing I was.
this is what I did hope it works for you.
1. disconnect all usb devices
2. un-install captivate drivers
3. reboot computer
4. goto device manager and verify that there is no USB device errors, if there is delete them and reboot again verify again in device manager.
5. install captivate drivers
6. reboot computer
7. start ODIN (DG or iCezars, iCezars is safer)
8. plug USB cable into the computer first (the one that came with the phone not an after market one)
9. hold both up and down volume buttons on the phone
10. plug the usb cable into the phone quickly to get into download mode (if I plugged the phone is slowly ODIN did not recognize the phone no COM, once I did it quick and it picked it up)
11. push START as soon as ODIN shows the COM1, COM2, COM3, COM4 etc (this had to be done quickly too, If i waited ODIN would show the COM but still would not start flashing back to stock)
this worked for me more than once I hope it helps you good luck
oh ok thanks, ill give that a try when i get off of work. i hope my battery doesnt die idk if its charging or not
well no luck even getting back to download mode. i bought a jig so i guess im waiting and trying while i wait.
i keep reading its possible to completely brick if odin fails... did i perma brick?
well a bump of sorts, the jig should come in the mail tomorrow. i miss my phone
jig came in the mail, im working on a few failed odin3 attempts but as i freaked out and started typing this post it seems like a great success. the jig works wonderful
donks232 said:
jig came in the mail, im working on a few failed odin3 attempts but as i freaked out and started typing this post it seems like a great success. the jig works wonderful
Click to expand...
Click to collapse
I have not had to do this but I know some others had issues with Odin and had to right click on Odin and run as administrator for it to work. Also the Odin 1 click should work in almost any situation to get you back to stock. The only worry (again never had the problem) is that depending on the build version of the phone you could lose the three button recovery. Look for the Odin that DG posted.
Sent from My KickAss Captivated CM7 OC'd 1.4Ghz/Undervolted
Just bricked mine... had a problem with kies mini while updating to official 2.2, had to enter download mode to return to stock but Odin failed and now this piece of **** won't even turn on nor enter download mode.. ****ing bad luck?
Toddyn said:
Just bricked mine... had a problem with kies mini while updating to official 2.2, had to enter download mode to return to stock but Odin failed and now this piece of **** won't even turn on nor enter download mode.. ****ing bad luck?
Click to expand...
Click to collapse
Did you try a jig?

[Q] SS AT&T Captivate stuck on ATT Splash Screen

Hi, I have a SS/ATT Galaxy S. It was working fine. I made the mistake of running an update to change the ATT splash screen. The device boots to the ATT splash screens and stays there. You can hear the SS start up sounds as though the unit booted ok.
I've tried various Odins they all hang on file analysis. I've tried using different computers per the recommendations in the various threads. I've tried many of the one click and also separate file updaters. They all hang on file analysis.
I am able to use Droid explorer to view the device. I've also put a new update.zip on an sd card but nothing seems to change the splash screen.
I'm not sure how to tell what version the unit is currently on.
I can get to the 3 button state. It says Android System recovery <2e>.
I have the options to reboot, reinstall packages, delete all user data and delete cache data. I've tried each of them, no change.
I have tried to read many threads before bothering anyone. Your input would be appreciated.
Thanks
if you have the update.zip on your phone, in the root of your SD card.. then from 2eRecovery, select reinstall packages.. may have to do it twice. That will boot your phone into clockworkmod recovery.. and from there you should be able to mount storage- put a ROM on your device, flash and be good to go.
Reply to thread
Hi, Thanks for the fast response. I've tried update.zip on both an sd card and also via droid explorer, about 5 times. If I reboot, same thing, the ATT splash is there, and the Galaxy boot sound. I can get into recovery and droid explorer works. If I try Odin it hangs on file analysis. Anything else I can try? Thanks again.
Are you in dl mode when you try this, or recovery?
The phone is now bricked. I was in recovery mode as I saw the 3 button posts on holding the up/down and pwr. I just tried it with dl mode and odin3 and bricked it.(based on another forum's input to check repartition I think). Now it won't boot at all but I'm still able to get to dl mode but not sure what to run to fully recover.
Delphin9 said:
The phone is now bricked. I was in recovery mode as I saw the 3 button posts on holding the up/down and pwr. I just tried it with dl mode and odin3 and bricked it.(based on another forum's input to check repartition I think). Now it won't boot at all but I'm still able to get to dl mode but not sure what to run to fully recover.
Click to expand...
Click to collapse
If you can get to dl mode try using AIO Captivate to flash back to stock 2.1. I've had success as I flashed with the partition checked and had to go all the way back using ODIN contained in the AIO Captivate program. Found here
Delphin9 said:
The phone is now bricked. I was in recovery mode as I saw the 3 button posts on holding the up/down and pwr. I just tried it with dl mode and odin3 and bricked it.(based on another forum's input to check repartition I think). Now it won't boot at all but I'm still able to get to dl mode but not sure what to run to fully recover.
Click to expand...
Click to collapse
Yeah if you can get into download mode than you are not bricked. I would Odin or Heim back to JF6 and go from there. What happened when you tried reinstalling packages from 2e? I know you said everytime you reboot- but what did it say when selected reinstall packages?
Sent from my SGH-I897 using XDA Premium App
I'm back to 2.1, baseband I897UCJF6, Kernal 2.6.69, Eclair. Thanks to everyone for your very kind help. Much appreciated.
Delphin9 said:
I'm back to 2.1, baseband I897UCJF6, Kernal 2.6.69, Eclair. Thanks to everyone for your very kind help. Much appreciated.
Click to expand...
Click to collapse
Great.. glad to hear it
Sent from my SGH-I897 using XDA Premium App
Delphin9 said:
I'm back to 2.1, baseband I897UCJF6, Kernal 2.6.69, Eclair. Thanks to everyone for your very kind help. Much appreciated.
Click to expand...
Click to collapse
Now on to some real ROM flashing!! Glad you got it working. I did almost the same thing and was sweating bullets.
Yeah, it was quite scary. I actually purchased some 100k resistors on Ebay but didn't need to make the jig.
Can you recommend a good set of f/w to load? Is it worth it to move to 2.3?
Cheers...
Delphin9 said:
Yeah, it was quite scary. I actually purchased some 100k resistors on Ebay but didn't need to make the jig.
Can you recommend a good set of f/w to load? Is it worth it to move to 2.3?
Cheers...
Click to expand...
Click to collapse
Of course it is worthed it to move to 2.3 I mean, it comes with so many more features and is running just perfect as a everyday rom. You shouldn't be disapointed
Sent from my Mosaic powered I896 using Tapatalk
But, just in case, out wouldn't hurt to have a proper jig laying around. I'm just saying...
mrhaley30705 said:
But, just in case, out wouldn't hurt to have a proper jig laying around. I'm just saying...
Click to expand...
Click to collapse
+1.
I had to make a jig when I soft bricked it. Not fun. Since then I purchased one and am glad I did.
Well, that means I won't have wasted my $2.00.
I saw this and thought it worth to try. http://www.youtube.com/watch?v=D0aoabVtPJ8
In your footer, it says you're using mosaic.
e.g. ROM: Mosaic III, ¤Kernel: Xcal's #14, ¤Modem: JK4, ¤Launcher: ADW Ex
Can you point me to the correct files/process? I guess I'm scared of screwing it up again. when I look on the forum there's almost too much info for a noob to choose which is best. Cheers...

hard bricked, any advice before i use usb jig

soooooooo. I have a i9000m and i wanted to flash it using odin because cwm wasn't working and i googled for vibrant. so i didn't really pay attention to the title when it said ``captivate only`` http://forum.xda-developers.com/showthread.php?t=731989 it went through the odin process but phone didn't restart. it just turned off and stayed off so I unplugged and now, it just shows the at&t world phone white background screen. and keeps restarting. cant get to recovery or download mode. odin doesn't see it either. I read many forums and I think Im going to have to go with the usb jig but before I do Im just wondering if there's another method to get into download mode or some program or adb that can find the phone. thanks
pankajs37 said:
but before I do Im just wondering if there's another method to get into download mode or some program or adb that can find the phone. thanks
Click to expand...
Click to collapse
If you click the link below ( My Android Collections), you can try Easy Reboot Recovery..using ADB or the Android Recovery Tools, they have options for various functions, preset by developers
yeah....using adb is the only possibility i would take into consideration too
xsenman said:
If you click the link below ( My Android Collections), you can try Easy Reboot Recovery..using ADB or the Android Recovery Tools, they have options for various functions, preset by developers
Click to expand...
Click to collapse
thanks
pankajs37 said:
soooooooo. I have a i9000m and i wanted to flash it using odin because cwm wasn't working and i googled for vibrant. so i didn't really pay attention to the title when it said ``captivate only`` http://forum.xda-developers.com/showthread.php?t=731989 it went through the odin process but phone didn't restart. it just turned off and stayed off so I unplugged and now, it just shows the at&t world phone white background screen. and keeps restarting. cant get to recovery or download mode. odin doesn't see it either. I read many forums and I think Im going to have to go with the usb jig but before I do Im just wondering if there's another method to get into download mode or some program or adb that can find the phone. thanks
Click to expand...
Click to collapse
I accidentally Flashed a vibrant rom on my i9000. When I finally did get it into download mode with the JIG, I flashed back to stock firmware with ODIN and It totally ruined my phone.... The screen went all crazy and it kept rebooting faster than odin could do anything to it.
Just be careful. Im really not sure what happened But its pooched now for sure. JTAG is my only option on that one
if u dont own JIG or u dont know how to use ADB . the other way is
remove battery from phone /sim card / sd card
take the USB connect with ur Laptop or PC ( dont use it with charger it will not work)
connect with ur phone , then u will see the black screen being lil bit lighter
pres the 3 combos button to enter download mode and then flash ur ROM
this always worked for me , i hard bricked 4 times already my phone :/

Categories

Resources