After upgrading to 6.0, i tried to turn on Now On Tap.
I know where the setting is- when i slide it to "on", I get the popup that says "Want any help with any screen? Turn on Now on Tap". When i click "get started" the slider goes back to off.
Anyone else seeing this?
bmwt said:
After upgrading to 6.0, i tried to turn on Now On Tap.
I know where the setting is- when i slide it to "on", I get the popup that says "Want any help with any screen? Turn on Now on Tap". When i click "get started" the slider goes back to off.
Anyone else seeing this?
Click to expand...
Click to collapse
I'm having the same issue with my Nexus 9. Can't find any solutions. I flashed the factory image twice now and wiped everything but the problem persists. :crying:
Getting it on Nexus 5
Working fine for me. Haven't done anything special. Just enabled it. Hit okay. Tried it out in Chrome. Went back to settings and still toggled on.
Sent from my Nexus 6 using Tapatalk
Okay, found it!
Apparently I can't use my Google App account ([email protected]) with Now on Tap. It works when I switched to my Google account ([email protected]). Hope that helps.
I'm having this problem too, and like you, I have a Google Apps account I'm using for my phone (I own the domain, and am the administrator). I'm going to have to look into this; either it may not be enabled for Google domains yet, or, it may have to be turned on, something I just found out with Google Maps (which was turned off in my Apps, so I couldn't access it until I turned it on).
I'll take a look, and if I find something, I'll post back.
---------- Post added at 10:40 PM ---------- Previous post was at 10:17 PM ----------
Okay, here is what I found for Google Apps for Domain Users.
For Google Now On Tap to work, the Web History service must be turned on in your Google Apps Domain. However, finding this is a real pain. Here is what to do:
The problem is the "x" to remove the filter is all the way on the right (in chrome).
1. Log In to your Google Apps admin control panel
2. At the bottom of your dashboard click on "More Controls", then "Apps"
3. Click "Additional Google Services"
4. Remove the Filter "Top Featured Services" by clicking on the "x" on the upper right side.
5. Scroll to the bottom and find Web History
6. Click the "On" Button
a. Select for all users; or
b. If you have various organizational units select which organizational unit
I am told this may take a bit to trickle down to one's phone (sometimes up to 24 hours to all users in the domain). I have made the change myself, but have not been able to turn Now On Tap on yet. However, others have reported this as what does the trick.
If I had not found this through a Google community thread, I'd have no idea how to do it. It's certainly convoluted and the admin control panel doesn't make it easy to find, nor would I have had any idea that this was the fix. I'll update everyone with my results once I've had time to see if the change takes effect.
ADDITIONAL NOTE: If you do not have the following setting enabled on your phone, you cannot turn on Now On Tap:
Settings->Search & Now->Accounts & Privacy->Google Activity Controls->Web & App Activity must be set to ON.
Hi,
I'm wondering if some of you KLD / KLG / MX / etc unit owners are using google voice commands. I can't use it properly on my unit, it crashes all the time. Sometimes it works, but usually it crashes. I'm using Malaysk rom. Is there anybody who can you use google voice without any problems? Or is there a simpel solution to fix my issues? I'm using a external mic connected with a jack to the backside of my unit.
I have spent a lot of time with this issue. My views are that the OEM version of the Google app is the only stable version(for voice use) for these HUs. My JY solution was to extract the Velvet.apk from the factory ROM. After updating to a Malsysk ROM, I replaced the pre updated apk back to the older factory version. You will lose out out on some updated features, but having a working voice command is nice tradeoff.
Velvet.apk, OEM JY Version
https://drive.google.com/file/d/0B0iQtPEIFgeHR3hQdGlvd2RrVUk/view?usp=sharing
Missing features.
carter.w.jason said:
I have spent a lot of time with this issue. My views are that the OEM version of the Google app is the only stable version(for voice use) for these HUs. My JY solution was to extract the Velvet.apk from the factory ROM. After updating to a Malsysk ROM, I replaced the pre updated apk back to the older factory version. You will lose out out on some updated features, but having a working voice command is nice tradeoff.
Velvet.apk, OEM JY Version
Click to expand...
Click to collapse
Hi, Does your okay google now allow you to make phone calls, send email etc.... what features are you loosing out by going this route. Thanks!!!!
aledesma said:
Hi, Does your okay google now allow you to make phone calls, send email etc.... what features are you loosing out by going this route. Thanks!!!!
Click to expand...
Click to collapse
Phone calls? No. I believe this is a common issue, there is no phone hardware onboard. Though I'm not that familiar with that feature.
Email and other task could be handled with Autovoice if Google app can not. Again, not that familiar.
For me, the main missing feature was choice of navigation app. Nav questions will only launch GMaps, newer version can launch Waze or your nag app choice, by default.
carter.w.jason said:
I have spent a lot of time with this issue. My views are that the OEM version of the Google app is the only stable version(for voice use) for these HUs. My JY solution was to extract the Velvet.apk from the factory ROM. After updating to a Malsysk ROM, I replaced the pre updated apk back to the older factory version. You will lose out out on some updated features, but having a working voice command is nice tradeoff.
Velvet.apk, OEM JY Version
https://drive.google.com/file/d/0B0iQtPEIFgeHR3hQdGlvd2RrVUk/view?usp=sharing
Click to expand...
Click to collapse
Thanks for your comment. I tried your solution and its working better, i still get some errors time to time, but is much better...thanks
[
aledesma said:
Hi, Does your okay google now allow you to make phone calls, send email etc.... what features are you loosing out by going this route. Thanks!!!!
Click to expand...
Click to collapse
If you have a phone connected via BT you can make phone calls using OK Google.
Tumke32 said:
Hi,
I'm wondering if some of you KLD / KLG / MX / etc unit owners are using google voice commands. I can't use it properly on my unit, it crashes all the time. Sometimes it works, but usually it crashes. I'm using Malaysk rom. Is there anybody who can you use google voice without any problems? Or is there a simpel solution to fix my issues? I'm using a external mic connected with a jack to the backside of my unit.
Click to expand...
Click to collapse
I've read some posts in the Malaysk ROM thread and many people have modded their units by opening them up and re-runing the internal mic. It's that mic, not the external, that is used for voice commands and apparently it is an unshielded wire that allows for a lot of interference and therefore unreliable google voice. I'm still foggy on the voice dialing but someone somewhere got this to work but not through the native bluetooth app. I think I read that they used the RK3066/Rk3188 app in the google play store or something...I'm just getting started with my unit and it's not even installed yet. Hopefully some of this was insightful for you.
newt_dunbarton said:
I've read some posts in the Malaysk ROM thread and many people have modded their units by opening them up and re-runing the internal mic. It's that mic, not the external, that is used for voice commands and apparently it is an unshielded wire that allows for a lot of interference and therefore unreliable google voice. I'm still foggy on the voice dialing but someone somewhere got this to work but not through the native bluetooth app. I think I read that they used the RK3066/Rk3188 app in the google play store or something...I'm just getting started with my unit and it's not even installed yet. Hopefully some of this was insightful for you.
Click to expand...
Click to collapse
I am using the latest Malaysk ROM dated 10th January 2016 for RK3188 1024*600. It lets me speak Ok Google and Call (contact name) to the phone when after pressing the call button. The way it works for me is:
1. Whatever is playing on the unit, it stops when I press the call button on my steering;
2. It launches the unit's dial screen;
3. I say 'OK Google', it launches the ok google listener on the phone;
4. I say 'Call (contact name)' and it calls.
Few things I had to manage before this started working was:
1. Enable the option to receive commands over bluetooth in Google Now settings in the phone;
2. Enable to XPOSED MTC in the XPOSED framework in the head unit;
3. Change the setting to integrate with phone's google now interface (something like that) in XPOSED MTC module.
Hope this helps.
Can you elaborate on this process please?
carter.w.jason said:
I have spent a lot of time with this issue. My views are that the OEM version of the Google app is the only stable version(for voice use) for these HUs. My JY solution was to extract the Velvet.apk from the factory ROM. After updating to a Malsysk ROM, I replaced the pre updated apk back to the older factory version. You will lose out out on some updated features, but having a working voice command is nice tradeoff.
Velvet.apk, OEM JY Version
https://drive.google.com/file/d/0B0iQtPEIFgeHR3hQdGlvd2RrVUk/view?usp=sharing
Click to expand...
Click to collapse
Did you go to file manager and replace the Malaysk version? Where is it located? or did you simply install with with apk instal app. Than you so much!!!!
aledesma said:
Did you go to file manager and replace the Malaysk version? Where is it located? or did you simply install with with apk instal app. Than you so much!!!!
Click to expand...
Click to collapse
Uninstalled with Titanium Backup. Velvet.apk is located in /system/priv-app. Copy/Paste replacement Velvet.apk using Root Explorer. !!! Set file permissions to 644 with Root Explorer !!! Reboot.
shaiq123 said:
I am using the latest Malaysk ROM dated 10th January 2016 for RK3188 1024*600. It lets me speak Ok Google and Call (contact name) to the phone when after pressing the call button. The way it works for me is:
1. Whatever is playing on the unit, it stops when I press the call button on my steering;
2. It launches the unit's dial screen;
3. I say 'OK Google', it launches the ok google listener on the phone;
4. I say 'Call (contact name)' and it calls.
Few things I had to manage before this started working was:
1. Enable the option to receive commands over bluetooth in Google Now settings in the phone;
2. Enable to XPOSED MTC in the XPOSED framework in the head unit;
3. Change the setting to integrate with phone's google now interface (something like that) in XPOSED MTC module.
Hope this helps.
Click to expand...
Click to collapse
Hi,
1. Enable the option to receive commands over bluetooth in Google Now settings in the phone;
Were can i find this option? I have a nexus 5 and i updated my google now, but there no option like that in google now. Or do you mean the option "bluetooth headset" under voice?
3. Change the setting to integrate with phone's google now interface (something like that) in XPOSED MTC module.
I can't find any options in Xposed MTC related to what you are writing. Are you sure this option is in Xposed MTC?
Thank you!!!
carter.w.jason said:
Uninstalled with Titanium Backup. Velvet.apk is located in /system/priv-app. Copy/Paste replacement Velvet.apk using Root Explorer. !!! Set file permissions to 644 with Root Explorer !!! Reboot.
Click to expand...
Click to collapse
I will give it a shot!!!
Hi there,
I to have been wondering about the best way to get voice dialling working and as my google voice crashes the HU more often than not, I think it is best to do this as shaiq123 has suggested by pressing the call button the steering wheel and then Ok Googling the phone to make the call.
But my phone goes to lock screen in the car and that stops this working. What I would like is that when my phone connects to the car bluetooth it
1) stops it going to lockscreen
2) activates wifi hotspot
3) activates 'ok google' if it is not normally activated
and it reverses on disconnecting.
Is this something easily done or do I need some kind of app to do this?
A final thing that would be helpful, is that it would be useful to give the play music command to direct the HU to play music from an HU attached SD card rather than the phone memory. Is there a way to also configure that (i.e. that the command would seek music stored on HU rather than phone first?)
Cheers
Mr Bigglesworth said:
Hi there,
I to have been wondering about the best way to get voice dialling working and as my google voice crashes the HU more often than not, I think it is best to do this as shaiq123 has suggested by pressing the call button the steering wheel and then Ok Googling the phone to make the call.
But my phone goes to lock screen in the car and that stops this working. What I would like is that when my phone connects to the car bluetooth it
1) stops it going to lockscreen
2) activates wifi hotspot
3) activates 'ok google' if it is not normally activated
and it reverses on disconnecting.
Is this something easily done or do I need some kind of app to do this?
A final thing that would be helpful, is that it would be useful to give the play music command to direct the HU to play music from an HU attached SD card rather than the phone memory. Is there a way to also configure that (i.e. that the command would seek music stored on HU rather than phone first?)
Cheers
Click to expand...
Click to collapse
You could achieve the first part using Tasker, you would just create a profile to run your tasks that actives when your phone connects to the headunit. Its a great app for automating stuff like that.
dc5daft said:
You could achieve the first part using Tasker, you would just create a profile to run your tasks that actives when your phone connects to the headunit. Its a great app for automating stuff like that.
Click to expand...
Click to collapse
Thanks - in fact this morning I have downloaded the trial for Tasker as well as Automate to see if they can do what I am looking for.
I've decided what would be really helpful would be if I could
1) Use app to detect when phone connects to car HU via bluetooth
2) Launch Wifi Hotspot
3) set the camera button to unlock screen and activate google voice
Now 1&2 look like its not too difficult and may even be doable using the Sony Smart Connect app (on a Z2, not rooted).
3 doesn't seem to be as instantly obvious. In tasker, I put in a new profile>event>hardware>button camera, also selected non beginner settings so could pit priority to highest and activate stop event, then put the task as launch voice search app - but it just keeps doing the camera?
Mr Bigglesworth said:
Thanks - in fact this morning I have downloaded the trial for Tasker as well as Automate to see if they can do what I am looking for.
I've decided what would be really helpful would be if I could
1) Use app to detect when phone connects to car HU via bluetooth
2) Launch Wifi Hotspot
3) set the camera button to unlock screen and activate google voice
Now 1&2 look like its not too difficult and may even be doable using the Sony Smart Connect app (on a Z2, not rooted).
3 doesn't seem to be as instantly obvious. In tasker, I put in a new profile>event>hardware>button camera, also selected non beginner settings so could pit priority to highest and activate stop event, then put the task as launch voice search app - but it just keeps doing the camera?
Click to expand...
Click to collapse
Create a new Profile>State>Net>BT Connected then click the magnifying glass next to name and select the name of your headunit. This will mean whenever your bluetooth is connected to the headunit it will run the tasks associated with it. It will give you the option to name and create a task once you create your profile then create new>Net>WiFi Tether and set to On.
I have a Z2 as well and just tried the camera button as a profile and it didn't work for me either, you'll need to do some googling on that, not sure why it doesnt work. It's best to set a flash (Alert>Flash) in your task as a test to see if your task runs but I'm sure you need to need to have root to unlock the screen.
dc5daft said:
Create a new Profile>State>Net>BT Connected then click the magnifying glass next to name and select the name of your headunit. This will mean whenever your bluetooth is connected to the headunit it will run the tasks associated with it. It will give you the option to name and create a task once you create your profile then create new>Net>WiFi Tether and set to On.
I have a Z2 as well and just tried the camera button as a profile and it didn't work for me either, you'll need to do some googling on that, not sure why it doesnt work. It's best to set a flash (Alert>Flash) in your task as a test to see if your task runs but I'm sure you need to need to have root to unlock the screen.
Click to expand...
Click to collapse
Thanks for this - and yes this where I had got to (which make me feel better!). And I too think the camera button may not be workable without root.
I think I need to change my plans and see if I can prevent the lockscreen to come on when connected to this bluetooth device. That way I can fall back to using ok google as the lockscreen prevents ok google from completing requests.
Okay - think I've done that and it was easy enough, now have a profile which when connected to HU through bluetooth does (1) set off wifi tether and (2) Set keyguard off. Then with (3) double tap to wake screen and (4) Ok google should be able to do what I need it to.
Last thing I'm wondering if you could do is to create a large voice dial icon (double normal size etc) on screen (in case initial ok google doesn't work)...
Dear forum members - need help/ advice urgently.
I Titanium deleted/ froze some Samsung Gear/ S Voice/ S Health files this morning as I thought these were surplus to my requirements.
I restarted my device (after installing exposed module AdAway reborn) - since then, on my Note5 unlock-screen (which has fingerprint activation) the keyboard is missing - during the 1st screen unlock after a reboot, my Note5 usually prompts me to input my back-up password instead of accepting fingerprint unlock, after this 1st unlock then fingerprint screen unlocking will work fine for any subsequent screen unlocks (as long as phone is not rebooted).
But now the only "keyboard" I get in the unlock screen is a microphone symbol with "Tap the mic button to speak" message (nothing happens with this mic anyway when I try to use it); also at the bottom of this "keyboard" is a row of buttons (back/comma/full-stop/? mark/space/globe-type symbol/Delete/Return) which do not register in the password space anyway.
So I cannot get past the unlock screen anymore!!! I must have accidentally froze/deleted some component of the Samsung keyboard.....?
Please help somebody.....:crying:
Try to connect external keyboard via otg Cable than when you open the phone go to playstore and install any keyboard as you wish (i.e gkeyboard is the best ) and you can move on ... Without Samsung keyboard ....
Thanks:good: for the suggestion mala96.
I managed to resolve the lack of keyboard issue @ lock-screen a couple of days ago - I re-installed my custom ROM (thankfully without loosing any of my data/ sdcard storage files), got past the now swipe-able lock-screen and then I had to install a 3rd party keyboard (SwiftKey & G-Board), and also made sure S-Voice was no longer frozen.
It is strange that Samsung keyboard is no where to be found anymore.....
Also, my Gallery app does not load up (or ?scan) my camera album/ storage photos anymore although these pics are still there in exactly the same storage folders as they used to be - Now I am resorting to the Piktures app until resolve Samsung/android 'Gallery' issue.
Also, now no option of changing my lock-screen wallpaper either....
Hi there,
maybe this topic is wrong in this forum. I dont know where to ask.
Some time ago I was using my Nexus 5 with stock Android.
On this device I used the Swiftkey Keyboard and with this keyboard the Google Speech to Text engine.
I used to button to start recording, the system was processing and then my speech was transferred as text in the input field in any app like Messenger, WhatsApp, whatever.
Now I got my new Mate 10 Pro (BLA-L09). For my surprise the Swiftkey was preinstalled, but okay. I organized my phone in that way I like it and everything was fine.
But now there is a new step in this process. When I talked to my phone to record my speech there is an additional screen where I can choose some options. The option I choose will be transferred in the text-input field.
But I do not find any solution to skip the options screen that google directly puts the best fitting solution into my input.
See attached screenshots for any informationen.
Maybe someone knows where to deactivate this or how I can use it the "old" way.
Thanks.
Experts,
I've been using an old version (5.2.04.25) of s-notes (not Samsung notes) for the well known issue that many people have of preferring it over Samsung notes.
One of main reason to use s-notes is the ability to pin any number of action memos to the home screen very easily and quickly . which was great, till now !
Some how it stopped working , even though the usual message "Action memo pinned to home screen and saved in S Notes" will flash , but it actually just saved in S-notes without pinning !
I wish I can track the changes in my device that triggered this, but I can't .
Any ideas?
Or any practical alternatives
regards,
Alternative: use Samsung Notes, as you can pin these notes to home screen as well!
OnnoJ said:
Alternative: use Samsung Notes, as you can pin these notes to home screen as well!
Click to expand...
Click to collapse
But you can not pin them directly after you double tap with the s-pen , you will have to save them first and then open Samsung notes and only then you will be able to pin them......so not really practical
Works for me, as I do not pin many notes per day to my homescreen. If you do, I agree it is not practical...
hasan_dubais said:
Experts,
I've been using an old version (5.2.04.25) of s-notes (not Samsung notes) for the well known issue that many people have of preferring it over Samsung notes.
One of main reason to use s-notes is the ability to pin any number of action memos to the home screen very easily and quickly . which was great, till now !
Some how it stopped working , even though the usual message "Action memo pinned to home screen and saved in S Notes" will flash , but it actually just saved in S-notes without pinning !
I wish I can track the changes in my device that triggered this, but I can't .
Any ideas?
Or any practical alternatives
regards,
Click to expand...
Click to collapse
I have exactly the same story - can't pin memos any more to my home screen of my Note8. It happened last month after i install Android software update provided by Samsung. Most likely the issue with memos is related to the increase of the security of Android OS. Unfortunately Android security updates can't be reverted. I think no one will be able to fix this ((
I'm having the same problem, so if someone has an answer, I'd be interested in knowing what it is.
Anyone found a solution?