Database Develop

Question: No DATA on US ATT Unlocked Eurospec

Just got my Note straight from the UK, unlocked. Been on the phone with ATT about 6 times. I can send and recieve calls, texts - but no DATA. They can't seem to figure out why it will not pick up the ATT Data Network. Sim, EIN all linked, but no joy.
I am a noob, sorry - any ideas. I hate to send the phone back.
Any ideas ?
Update - Funk2641's response below (no APN was entered) - fixed it the issue.
Still, ATT would not give me a 4G smartphone plan - even though the H+ shows up next to the clock ? Initial Speedtests look like the same as my Infuse, Atrix and 4S.
Thanks everybody (Funk2641) for your help ! I hope this thread saves some agony for many as this phone is hitting the states. Don't know if I will tread in Eurospec for the Nexus, as I will want to hold that one in my hand first.
Also, this is a great phone - speed, battery life and the screen is fantastic !

Did you put the APN in correctly?
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410 (note. this could also be 310, 41 or 15)
APN Type: leave blank
Go to Settings --> Wireless and Network --> and Access Point Names. You might have to make a new apn. (like I did)

No, I will give it a try.
Thx.

please keep posted.....I'll be on Att Friday

I will follow this thread since I will also switch from T-mobile to AT&T.

I too have the same issues. I actually used a few different apns and got edge to work poorly, I sighed and told myself ICS would fix it all up better and to just enjoy the extra battery life of 2g now, God I hope a get this cleared up
Sent from my GT-N7000 using xda premium

Technically, the Note is just a big SGS2. There's no reason on the phone side you should be having a problem using the Cingular APN. I'm using a ISGS2 and a UK 3G Tab 10.1 on AT&T with no problem. It's either something with the provisioning of your account or your Note may not have the right bands (Asian?). The latter is unlikely if you ordered it from the UK. Try reseting the APN to default under network settings. Also, if you're on a legit 4G plan there's a specific APN that you can find on the ASGS2 forum.

Here is another APN that works, I had the same issue
For APN settings use the name ATT and then for APN the word phone. Leave everything else blank-what is needed will get filled in automatically. Click the APN when you finish adding it and the radio button turns green to indicate it is working. The advantage to this APN setting is it gives you clear access and data speeds are not limited by ATT.

Those apns didn't work and I too a would doubt my phone bring the Asian version,.this version of gingerbread has the option to suspend my data network from holding down the power button maybe the software isn't...... I don't know I have no clue but my apns are normal but when's search they don't come up
In the list automatically so something a wrong
and I came from a hspa+ phone so my plan is already to go, I called to double check

to op, glad you got it straightened out...who did you order from and how much?

Funk2641 said:
Did you put the APN in correctly?
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410 (note. this could also be 310, 41 or 15)
APN Type: leave blank
Go to Settings --> Wireless and Network --> and Access Point Names. You might have to make a new apn. (like I did)
Click to expand...
Click to collapse
My phone came with no apn settings. It was from europe ( ? Polish )
I had to manually enter the settings.
Pretty much the same as what is listed here ( got from SGSII forum )
WOrks great.
FOr those not working, try leaving the username and password blank
It should also work

drgopoos said:
My phone came with no apn settings. It was from europe ( ? Polish )
I had to manually enter the settings.
Pretty much the same as what is listed here ( got from SGSII forum )
WOrks great.
FOr those not working, try leaving the username and password blank
It should also work
Click to expand...
Click to collapse
Doc, I need it by the weekend like a drug, can you suggest a place to get it from. I'm Stateside and on AT&T if it helps!

drgopoos said:
My phone came with no apn settings. It was from europe ( ? Polish )
I had to manually enter the settings.
Pretty much the same as what is listed here ( got from SGSII forum )
WOrks great.
FOr those not working, try leaving the username and password blank
It should also work
Click to expand...
Click to collapse
Hi,
What kind of Internet speed you are getting? Anyways you can do a speedtest and let us know? Please?
Thank you.

the.mister.d said:
Hi,
What kind of Internet speed you are getting? Anyways you can do a speedtest and let us know? Please?
Thank you.
Click to expand...
Click to collapse
I got between 6.02 and 7.73 down; 1.08 - 1.09 up in Atlanta GA

Funk2641 said:
Did you put the APN in correctly?
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410 (note. this could also be 310, 41 or 15)
APN Type: leave blank
Go to Settings --> Wireless and Network --> and Access Point Names. You might have to make a new apn. (like I did)
Click to expand...
Click to collapse
with the note you need to set manually the APN?did not set automatically?After insert the SIM Card and restart is not set?

Funk2641 said:
I got between 6.02 and 7.73 down; 1.08 - 1.09 up in Atlanta GA
Click to expand...
Click to collapse
That's nice! Thank you!
I will be ordering mine this weekend. Not sure though which place yet !
Waiting to see if I can get it any cheaper from India. Have folks coming from India to NY in two weeks. Lets see!!
Thank you again!

I cannot connect to at&t. under APN i get "no items" and cannot get to a place to enter apn settings.
"use packet data" is selected
network mode is gsm/wcdma (auto mode) is selected
"search networks shows select automatically, at&t, and at&t. I have tried all three
i get regestered on network, but still will not connect help!
I am on the iphone plan with unlimited data, worked just fine in galaxy tab original 7"

i tried using funks apn settings and i still have nothing, i came from an atrix where i always got H+ and now here are me speeds, my speed test was done in detroit, i live in NJ my ping was 317, U 144 kbps D 155 kbps, i have no idea what is wrong with this phone but att can get going on it, i called and they have nothing for me!!! i dont know what to do

What plans are you guys, please?
(Anyone on month to month $50 unlimited?

There are two different APNs to use depending on what data plan you're on. If you're using a MediaNet or Data for non-Smartphones plan (3G) you need to use the Cingular APN. If you're on a legit 4G plan you need to use the special APN for 4G phones. If you reverse it, you'll get no data. For those of you on the 4G plan, go in to the APN settings. When you press menu, there's a reset to default option. It should pull the 4G settings down automatically. If you're on a 3G plan don't do this and instead manually enter the below settings. If you do this correctly you should get data. If you have a quad-band phone and still can't get data it's something with your account settings and not the h/w.
Cingular APN from the SGS2:
Name: Cingular 410
APN: wap.cingular
Proxy: null
Port: null
Username: [email protected]
Password: CINGULAR1
Server: cingulargprs.com
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: null
MCC: 310
MNC: 410
Authentication type: null
APN Type: internet + mms
4G APN from ASGS2 (There are two)
Name: ATT PHONE
Everything null except
MCC 310
MNC 410
APN type: Internet
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
APN Type: mms,supl

No data connection??

I went out an purchased an HTC Raider from Rogers to replace my Bell S2.
I did the HTC Dev unlocked the the phone and rooted it. I applied the ICS update to the phone from Rogers. With the exception of the phone being Rooted - everything is stock.
I can make phone calls, send texts - no issues. I can't get the data to work. I've set the connection to use HSPA and GSM only. I use Petro Canada Mobility with ProxyDroid (I've always used this with no issues and I don't abuse the service and it is has worked on every android phone I've owned).
I've added the exact APN settingsand it doesn't work! I have done everything that I can think of and right now I am beating my head against a brick wall.
APN : goam.com
proxy : 10.128.1.69
port:80
username: wapuser1
password: wap
Server : (leave whatever is default)
MMSC http:/mms.gprs.rogers.com
MMS proxy 10.128.1.69
MMS port 80
MCC 302
MNC 720
Authentication type None
APN type : (leave whatever is default)
The following is set in ProxyDroid:
proxy : 10.128.1.69
port:80
username: wapuser1
password: wap
I have it set to come on once the wireless is off.
Can anyone help please?

Silly question, but if the apn settings accept the proxy info, what do you need proxydroid for?
Sent from my HTC Raider

Well, just go to your carrier and ask for an LTE compatible sim AMD also to set up your line for LTE
There is no cost go doing the above, the plan stays the same...only difference is you will have LTE
Sent from my HTC PH39100 using Tapatalk 2

SOLVED: AT&T terrible speedtest results (fixed mine)

I've seen some AT&T customers complain about terrible speeds and latency when doing speed tests. I too had this issue. Before the fix, I was getting about 20 kbps downstream and 400+ latency. After, I'm getting 6+ mbps and 80-120 latency. I fixed mine by adding a new APN with these settings. To change them, go to SETTINGS -> MORE... -> MOBILE NETWORKS -> ACCESS POINT NAMES. From here, either select the existing one or click the menu key to create a new one. Also, if you create a new one, make sure to select it after you're done making it. (you have to tap the radio to select it because tapping the name will edit it but NOT select it).
The blank ones are blank/unspecified. You probably only need to change APN and APN type (the other shown values were already like this on mine). For APN type, those are commas separating the terms. I posted a link to 3 shared screenshots so you can see what it should look like.
APN: phone
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MCC: 310
MNC: 410
Authentication type:
APN type: default,supl,agps,fota,dun
APN protocol: IPv4
APN roaming protocol: IPv4
APN enable/disable (this is checked but grayed out on mine)
Bearer:
https://www.dropbox.com/sh/p65dvtd2ff4y46a/oAjj5Bv8qi

whittikins said:
I've seen some AT&T customers complain about terrible speeds and latency when doing speed tests. I too had this issue. Before the fix, I was getting about 20 kbps downstream and 400+ latency. After, I'm getting 6+ mbps and 80-120 latency. I fixed mine by adding a new APN with these settings. To change them, go to SETTINGS -> MORE... -> MOBILE NETWORKS -> ACCESS POINT NAMES. From here, either select the existing one or click the menu key to create a new one. Also, if you create a new one, make sure to select it after you're done making it. (you have to tap the radio to select it because tapping the name will edit it but NOT select it).
The blank ones are blank/unspecified. You probably only need to change APN and APN type (the other shown values were already like this on mine). For APN type, those are commas separating the terms. I posted a link to 3 shared screenshots so you can see what it should look like.
APN: phone
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MCC: 310
MNC: 410
Authentication type:
APN type: default,supl,agps,fota,dun
APN protocol: IPv4
APN roaming protocol: IPv4
APN enable/disable (this is checked but grayed out on mine)
Bearer:
https://www.dropbox.com/sh/p65dvtd2ff4y46a/oAjj5Bv8qi
Click to expand...
Click to collapse
Do you get H+ insted H?? if u dont mind can you check in Settings, about phone and Status. in mobile network type HSPA:10 or HSPA+:15????

Didn't work for me (data gets disabled), however the only APN settings that have worked so far are the stock ones with wap.cingular.com. I have tried numerous other ones to no avail..

thekooliest said:
Didn't work for me (data gets disabled), however the only APN settings that have worked so far are the stock ones with wap.cingular.com. I have tried numerous other ones to no avail..
Click to expand...
Click to collapse
you have to have a lte data plan for this apn to work.

cundiffr said:
you have to have a lte data plan for this apn to work.
Click to expand...
Click to collapse
Thanks..I honestly didn't think there was a difference between the LTE and non-LTE plans at AT&T. But my dad is in charge of the plan, so maybe I am missing something.

I'm using the same Stock AT&T PTA apn I've used since the Infuse 4g and it works perfect. Stock APN I couldn't even get 20kbps most of the time. Now I can at least get 5.7 (about what I'm used to in my area).

pbpatel1981 said:
Do you get H+ insted H?? if u dont mind can you check in Settings, about phone and Status. in mobile network type HSPA:10 or HSPA+:15????
Click to expand...
Click to collapse
I've seen it at both.
Sent from my Nexus 4 using Tapatalk 2

I'm using the pta APN since I came from an LTE phone so my sim is provisioned for it. I usually got about 8-9mbps down in this location when on my sgs3 so if these speeds stick and improve I'm quite happy. Obviously uploads are the biggest hit but not too worried about that
Sent from my Nexus 4 using Tapatalk 2

mobilehavoc said:
I'm using the pta APN since I came from an LTE phone so my sim is provisioned for it. I usually got about 8-9mbps down in this location when on my sgs3 so if these speeds stick and improve I'm quite happy. Obviously uploads are the biggest hit but not too worried about that
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
howd you get speed test to work?

joshyy_rey said:
howd you get speed test to work?
Click to expand...
Click to collapse
It wouldn't work for me with the default WAP.Cingular APN. As soon as I changed it to the hspa+ one, speed test worked.
For this of you on the pta APN, does your MMS work? If so, do you still have the WAP.Cingular APN in the list (just not checked)? Or is the pta APN the only one listed?
I too have my Sim provisioned for lte, but if I use the pta APN, I get great data speeds, but no MMS. Thanks.
Sent from my Nexus 4 using xda premium

Many thanks for posting this! My internet donwload speeds went from .001 MBPS download to 2.97MBPS. I hate to say this, but it still felt snappy even at .001 MBPS. My Galaxy S2 was so slow to process websites.

solved minus mms......

I get faster speeds with the new APN, but I can't get H+ in areas where is was able to get it with my S3. Anyone have a solution?

thanks for this!

Posted this on another similar thread. Worked for me. It's the Cingular.WAP APN but slightly different.
"Anybody still having issues with att H+ speeds try the APN settings from this link
http://nerdynerdnerdz.com/blog/2011/07/23/att-apn-mms-settings-android/
My speed increased by 600% when I switched to this, from barely 1Mbps to 6+Mbps. I also can run the speed test app now whereas before I could not."
Sent from my Nexus 4

AT&T Northwest Indiana Southeast Chicagoland
Sent from my Nexus 4 using xda app-developers app

apolloms said:
solved minus mms......
Click to expand...
Click to collapse
Modify the following and you'll have MMS again:
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS port: 80

MaxCarnage said:
Modify the following and you'll have MMS again:
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS port: 80
Click to expand...
Click to collapse
So do you use the OP setting plus this? or the one posted a few posts up? also is a LTE data plan def required?

DRamer77 said:
So do you use the OP setting plus this? or the one posted a few posts up? also is a LTE data plan def required?
Click to expand...
Click to collapse
Yes, add this to the OP and everything will work.

I came across this topic on rootzwiki a while back and it's helped me a few times. Obviously it's for ATT only.
http://rootzwiki.com/topic/31135-att-apns-for-custom-roms/

[Q] ATT Vivid on Tmobile... 3g? 4g?

I plan on getting a Tmobile sim card and tossing it in my Vivid, getting the $30 a month plan and using it till I get a different phone.
Any chance I can use 3g or 4g on it? I've heard mixed answers about it being possible as recently Tmobile "flipped their network" or something like that. Just curious if it as ALL possible to get 3g or 4g data on mah vivid. Thanks

HSDPA working here on a HTC Vivid on T-Mobile
http://forum.xda-developers.com/show...8&postcount=12
and as for recently flipping the switch..i've had 3g-4g for the last 6 months with this phone on t-mobile

imranh101 said:
I plan on getting a Tmobile sim card and tossing it in my Vivid, getting the $30 a month plan and using it till I get a different phone.
Any chance I can use 3g or 4g on it? I've heard mixed answers about it being possible as recently Tmobile "flipped their network" or something like that. Just curious if it as ALL possible to get 3g or 4g data on mah vivid. Thanks
Click to expand...
Click to collapse
Wolf61477 said:
HSDPA working here on a HTC Vivid on T-Mobile
http://forum.xda-developers.com/show...8&postcount=12
and as for recently flipping the switch..i've had 3g-4g for the last 6 months with this phone on t-mobile
Click to expand...
Click to collapse
In case you still need help, here is what I suggest:
For the unlock, use unlockusa.com to get your code. They're the fastest and most reliable on the market.
For the internet, use the following settings for your APN (Credits: http://htcsource.com/2012/08/how-to-sim-unlock-the-htc-vivid-and-add-t-mobiles-access-point/) :
Name: T-Mobile.com
APN: fast.t-mobile.com
Proxy: Not Set
Port: Not Set
Username: Not Set
Password: Not Set
Server: wap.voicestream.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS proxy: 261.155.165.50
MMS port: Not Set
MMS protocol: WAP 2.0
MCC:310
MNC: 260
Authentication type; Not Set
APN type: default
APN enable/disable: Checked
Bearer:Unspecified
Enjoy your cool phone !
I hope that helps. It worked for me, as I was having the same issue.

Unable to receive MMS - ST tMobile

Hi,
I have tried just about every APN I can get my hands on and have talked to ST via chat and they give me APN's to try, yet I am unable to "RECEIVE" MMS connected to WiFi or Network. Something I have noticed, when I am attempting to download a MMS that was sent, I never see the network icon show up. Isn't that suppose to show up during the initial process? Any who, I will list the current and ONLY APN I have / use atm. Thanks!
NOTE: If it's not listed it is "NOT SET"
APN: wap.tracfone
Port: 8080
MMSC: http://mms.tracfone.com
MCC: 310
MNC: 260
APN Type: default,mms,supl (Should this have spaces?)
APN Enable/Disable: IS checked

SlimMan, are you using T-Mobile or another third party carrier that uses T-Mobile's network? If T-Mobile, my Sim automatically enters:
APN: epc.t-mobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
this works very well for me, 4G LTE, etc.

Raijinbu said:
SlimMan, are you using T-Mobile or another third party carrier that uses T-Mobile's network? If T-Mobile, my Sim automatically enters:
APN: epc.t-mobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
this works very well for me, 4G LTE, etc.
Click to expand...
Click to collapse
Thanks for the reply.
I am using T-Mobile via Straight Talk. The link you shared, I am not able to get it to load via Chrome or IE?
Thanks again.

SlimMan said:
Thanks for the reply.
I am using T-Mobile via Straight Talk. The link you shared, I am not able to get it to load via Chrome or IE?
Thanks again.
Click to expand...
Click to collapse
But Straight Talk piggy backs on AT&T.

Sorry for the confusion, if using over straight talk it will be different. So far wap.tracfone should work, have you called Straight talk support?