Database Develop

Question: No DATA on US ATT Unlocked Eurospec

Just got my Note straight from the UK, unlocked. Been on the phone with ATT about 6 times. I can send and recieve calls, texts - but no DATA. They can't seem to figure out why it will not pick up the ATT Data Network. Sim, EIN all linked, but no joy.
I am a noob, sorry - any ideas. I hate to send the phone back.
Any ideas ?
Update - Funk2641's response below (no APN was entered) - fixed it the issue.
Still, ATT would not give me a 4G smartphone plan - even though the H+ shows up next to the clock ? Initial Speedtests look like the same as my Infuse, Atrix and 4S.
Thanks everybody (Funk2641) for your help ! I hope this thread saves some agony for many as this phone is hitting the states. Don't know if I will tread in Eurospec for the Nexus, as I will want to hold that one in my hand first.
Also, this is a great phone - speed, battery life and the screen is fantastic !

Did you put the APN in correctly?
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410 (note. this could also be 310, 41 or 15)
APN Type: leave blank
Go to Settings --> Wireless and Network --> and Access Point Names. You might have to make a new apn. (like I did)

No, I will give it a try.
Thx.

please keep posted.....I'll be on Att Friday

I will follow this thread since I will also switch from T-mobile to AT&T.

I too have the same issues. I actually used a few different apns and got edge to work poorly, I sighed and told myself ICS would fix it all up better and to just enjoy the extra battery life of 2g now, God I hope a get this cleared up
Sent from my GT-N7000 using xda premium

Technically, the Note is just a big SGS2. There's no reason on the phone side you should be having a problem using the Cingular APN. I'm using a ISGS2 and a UK 3G Tab 10.1 on AT&T with no problem. It's either something with the provisioning of your account or your Note may not have the right bands (Asian?). The latter is unlikely if you ordered it from the UK. Try reseting the APN to default under network settings. Also, if you're on a legit 4G plan there's a specific APN that you can find on the ASGS2 forum.

Here is another APN that works, I had the same issue
For APN settings use the name ATT and then for APN the word phone. Leave everything else blank-what is needed will get filled in automatically. Click the APN when you finish adding it and the radio button turns green to indicate it is working. The advantage to this APN setting is it gives you clear access and data speeds are not limited by ATT.

Those apns didn't work and I too a would doubt my phone bring the Asian version,.this version of gingerbread has the option to suspend my data network from holding down the power button maybe the software isn't...... I don't know I have no clue but my apns are normal but when's search they don't come up
In the list automatically so something a wrong
and I came from a hspa+ phone so my plan is already to go, I called to double check

to op, glad you got it straightened out...who did you order from and how much?

Funk2641 said:
Did you put the APN in correctly?
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410 (note. this could also be 310, 41 or 15)
APN Type: leave blank
Go to Settings --> Wireless and Network --> and Access Point Names. You might have to make a new apn. (like I did)
Click to expand...
Click to collapse
My phone came with no apn settings. It was from europe ( ? Polish )
I had to manually enter the settings.
Pretty much the same as what is listed here ( got from SGSII forum )
WOrks great.
FOr those not working, try leaving the username and password blank
It should also work

drgopoos said:
My phone came with no apn settings. It was from europe ( ? Polish )
I had to manually enter the settings.
Pretty much the same as what is listed here ( got from SGSII forum )
WOrks great.
FOr those not working, try leaving the username and password blank
It should also work
Click to expand...
Click to collapse
Doc, I need it by the weekend like a drug, can you suggest a place to get it from. I'm Stateside and on AT&T if it helps!

drgopoos said:
My phone came with no apn settings. It was from europe ( ? Polish )
I had to manually enter the settings.
Pretty much the same as what is listed here ( got from SGSII forum )
WOrks great.
FOr those not working, try leaving the username and password blank
It should also work
Click to expand...
Click to collapse
Hi,
What kind of Internet speed you are getting? Anyways you can do a speedtest and let us know? Please?
Thank you.

the.mister.d said:
Hi,
What kind of Internet speed you are getting? Anyways you can do a speedtest and let us know? Please?
Thank you.
Click to expand...
Click to collapse
I got between 6.02 and 7.73 down; 1.08 - 1.09 up in Atlanta GA

Funk2641 said:
Did you put the APN in correctly?
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410 (note. this could also be 310, 41 or 15)
APN Type: leave blank
Go to Settings --> Wireless and Network --> and Access Point Names. You might have to make a new apn. (like I did)
Click to expand...
Click to collapse
with the note you need to set manually the APN?did not set automatically?After insert the SIM Card and restart is not set?

Funk2641 said:
I got between 6.02 and 7.73 down; 1.08 - 1.09 up in Atlanta GA
Click to expand...
Click to collapse
That's nice! Thank you!
I will be ordering mine this weekend. Not sure though which place yet !
Waiting to see if I can get it any cheaper from India. Have folks coming from India to NY in two weeks. Lets see!!
Thank you again!

I cannot connect to at&t. under APN i get "no items" and cannot get to a place to enter apn settings.
"use packet data" is selected
network mode is gsm/wcdma (auto mode) is selected
"search networks shows select automatically, at&t, and at&t. I have tried all three
i get regestered on network, but still will not connect help!
I am on the iphone plan with unlimited data, worked just fine in galaxy tab original 7"

i tried using funks apn settings and i still have nothing, i came from an atrix where i always got H+ and now here are me speeds, my speed test was done in detroit, i live in NJ my ping was 317, U 144 kbps D 155 kbps, i have no idea what is wrong with this phone but att can get going on it, i called and they have nothing for me!!! i dont know what to do

What plans are you guys, please?
(Anyone on month to month $50 unlimited?

There are two different APNs to use depending on what data plan you're on. If you're using a MediaNet or Data for non-Smartphones plan (3G) you need to use the Cingular APN. If you're on a legit 4G plan you need to use the special APN for 4G phones. If you reverse it, you'll get no data. For those of you on the 4G plan, go in to the APN settings. When you press menu, there's a reset to default option. It should pull the 4G settings down automatically. If you're on a 3G plan don't do this and instead manually enter the below settings. If you do this correctly you should get data. If you have a quad-band phone and still can't get data it's something with your account settings and not the h/w.
Cingular APN from the SGS2:
Name: Cingular 410
APN: wap.cingular
Proxy: null
Port: null
Username: [email protected]
Password: CINGULAR1
Server: cingulargprs.com
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: null
MCC: 310
MNC: 410
Authentication type: null
APN Type: internet + mms
4G APN from ASGS2 (There are two)
Name: ATT PHONE
Everything null except
MCC 310
MNC 410
APN type: Internet
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
APN Type: mms,supl

[Q] Weird Net10 internet issue

I have an unlocked Bell Atrix HD and I'm using it with the NET10 AT&T SIM. I followed the NET10 APN setting instructions and it told me to use the following:
Name: net10
APN: att.mvno
Proxy: proxy.mvno.tracfone.com
Port: 80
MMSC: mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Port: 80
I tried those settings and had no internet and no MMS. I removed the proxy and MMS proxy. I also tried removing the port for internet and MMS. Neither combination worked. I double checked my phone was unlocked by doing volume down + power and it says 'unlocked' on a black screen with white letters. I start trying all types of settings until I gave the T-Mobile APN a try (wap.tracfone). Internet worked immediately. MMS still doesn't work. I tried the T-Mobile and AT&T MMS settings with no luck. I did a speed test while tethering and it says AT&T Wireless Network Services so I know the SIM is for AT&T, plus the APN settings default to AT&T if I do restore default settings. I'm confused why the only APN that works is the T-Mobile 'wap.tracfone' one.
Anyone have good knowledge about this who is able to help me out?
I called NET10 and lets just say I have nothing to say about that..lol
Thanks,
Alex

Dude I'm having the same issues I have been scouring the internet forms fix I havent one yet either
Sent from my HTC One X using xda app-developers app

alexv305 said:
I have an unlocked Bell Atrix HD and I'm using it with the NET10 AT&T SIM. I followed the NET10 APN setting instructions and it told me to use the following:
Name: net10
APN: att.mvno
Proxy: proxy.mvno.tracfone.com
Port: 80
MMSC: mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Port: 80
I tried those settings and had no internet and no MMS. I removed the proxy and MMS proxy. I also tried removing the port for internet and MMS. Neither combination worked. I double checked my phone was unlocked by doing volume down + power and it says 'unlocked' on a black screen with white letters. I start trying all types of settings until I gave the T-Mobile APN a try (wap.tracfone). Internet worked immediately. MMS still doesn't work. I tried the T-Mobile and AT&T MMS settings with no luck. I did a speed test while tethering and it says AT&T Wireless Network Services so I know the SIM is for AT&T, plus the APN settings default to AT&T if I do restore default settings. I'm confused why the only APN that works is the T-Mobile 'wap.tracfone' one.
Anyone have good knowledge about this who is able to help me out?
I called NET10 and lets just say I have nothing to say about that..lol
Thanks,
Alex
Click to expand...
Click to collapse
Try taking your first proxy setting out (leave blank the one just under "APN") leave your MMS proxy as-is,
MMSC Should be http://mmsc.Cingular.com (type in the http:// that you left out)
For "MCC" use 310
For "MNC" use 410
See if that works for you
Sent from my A200 using xda premium

Hey there ATGadmin... i have an atrix 2 and just started with net10 yesterday and the data isnt working for me after nuuuumerous attempts at mixing and matching the different numbers, i dont understand the people on the phone when i call net10 so i cant really go that route. the way you suggested didnt work for me...can you help////?
ATGAdmin said:
Try taking your first proxy setting out (leave blank the one just under "APN") leave your MMS proxy as-is,
MMSC Should be http://mmsc.Cingular.com (type in the http:// that you left out)
For "MCC" use 310
For "MNC" use 410
See if that works for you
Sent from my A200 using xda premium
Click to expand...
Click to collapse

Have you guys set the APN type. My atrix HD wasn't getting data until I set it to the same as the stock att one except for DUN. After doing that and a reboot. It worked flawlessly.
note: the speed test app will not work for some reason. Only upload will register. If u want to run a speed test install flash for JB and go to speedtest.net.
Sent from my MB886 using xda premium

Anybody try setting up with tweeker apn internet?download from market,turn on Wi-Fi and download the settings. it should work just fine.
Sent from my MB886 using xda app-developers app

this works for me
create a new apn leave proxy blank dont mess with anything but listed below. it has been recently changed on the straight talk net 10 website
Name straight talk or net10
apn att.mvno
port 80
mmsc xda forum wouldnt let me post an address but in this space is mmsc.cingular
mms proxy: 66.209.11.33
mms port: 80

[Q] Straight Talk (AT&T) on T-Mobile Moto X (XT1053)

Does anyone here have experience using a T-Mobile / Dev GSM Moto X on Straight Talk's AT&T network? I've cut down my micro-sim to nano-sim. Had to fiddle around with it for a bit but I've finally got signal - just no data at the moment . Here are the APN settings I am currently using (with no luck)
APN Name: Straight Talk
APN: tfdata
Port: 80
MMSC: http://mms-tf.net
MMS Proxy: mms3.tracfone.com
MMS Port: 80
Thanks!

wushugene said:
Does anyone here have experience using a T-Mobile Moto X on Straight Talk's AT&T network? I've cut down my micro-sim to nano-sim. Had to fiddle around with it for a bit but I've finally got signal - just no data at the moment . Here are the APN settings I am currently using (with no luck)
APN Name: Straight Talk
APN: tfdata
Port: 80
MMSC: http://mms-tf.net
MMS Proxy: mms3.tracfone.com
MMS Port: 80
Thanks!
Click to expand...
Click to collapse
weird, those are the apn settings i'm using. how old is your sim? they switched over to these settings on the sims starting a few months ago. if you have one from earlier in the year you have to use the older ones...... is all i can think of.

mohlsen8 said:
weird, those are the apn settings i'm using. how old is your sim? they switched over to these settings on the sims starting a few months ago. if you have one from earlier in the year you have to use the older ones...... is all i can think of.
Click to expand...
Click to collapse
aha! thanks for suggesting that! my sim is about a year old, so after reading your suggestion I looked up an older APN setting and all is good now
I understand the newer sims allow us to use LTE - is it worth making the switch?

wushugene said:
aha! thanks for suggesting that! my sim is about a year old, so after reading your suggestion I looked up an older APN setting and all is good now
I understand the newer sims allow us to use LTE - is it worth making the switch?
Click to expand...
Click to collapse
depends i guess. it's nice to have and maybe a little faster than hspa+ on straight talk, but it's not going to change your life or anything haha. that said, i believe the sims are still on sale for $6.99 and the transfer was easy and seamless for me on their website. for $6.99, "why not" is what i said.

T-Mobile Moto X on Net10 (ATT SIM) w/ LTE?

Does anyone have a T-Mobile Moto X running on Net10 (ATT network) and getting LTE working?
If so, what APN settings are you using?
I purchased a nano ATT Net10 SIM from a reseller who cut it down to size, and it came with instructions which make me believe it might be an old SIM because the enclosed directions said to use:
Name: NET10
APN: att.mvno
Proxy: proxy.mvno.tracphone.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Port: 80
-----------------and additional info on various websites also suggest:
MCC: 310
MNC: 410
Auth Type: PAP
APN Type: default,supl,mms
If I delete the main proxy listed above and leave it blank, I can connect with 4G (HSPA+) but don't see LTE coverage areas. If I don't delete the proxy, I get nothing.
The settings for a new ATT SIM are very different, and didn't seem to work at all. Is it possible to even get LTE with the old SIM? I'm new to this SIM game. If I have to get a new SIM, can my existing 30 days be transferred to a different card?
Also, for the first couple hours it all acted very wacky. It would work, and then all of a sudden put up the icons saying the phone didn't have a SIM card at all. I'd pop out/in the card and reboot, and it would come back. Lost it this way 3 or 4 times, but it hasn't happened in a number of hours now. Would this suggest the cut-down nano SIM wasn't the best trimming job?

larry62 said:
Does anyone have a T-Mobile Moto X running on Net10 (ATT network) and getting LTE working?
If so, what APN settings are you using?
I purchased a nano ATT Net10 SIM from a reseller who cut it down to size, and it came with instructions which make me believe it might be an old SIM because the enclosed directions said to use:
Name: NET10
APN: att.mvno
Proxy: proxy.mvno.tracphone.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Port: 80
-----------------and additional info on various websites also suggest:
MCC: 310
MNC: 410
Auth Type: PAP
APN Type: default,supl,mms
If I delete the main proxy listed above and leave it blank, I can connect with 4G (HSPA+) but don't see LTE coverage areas. If I don't delete the proxy, I get nothing.
The settings for a new ATT SIM are very different, and didn't seem to work at all. Is it possible to even get LTE with the old SIM? I'm new to this SIM game. If I have to get a new SIM, can my existing 30 days be transferred to a different card?
Click to expand...
Click to collapse
I get 6-8 MBPS (and up to 21 MBPS) down with these settings Net10 on AT&T northeast Atlanta:
APN: tfdata
MMSC: http://mms-tf.net
MMS proxy: mms3.tracfone.com
MMS port: 80
MCC: 310
MNC: 410
APN type: default,supl,mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
MVNO type: None
All other fields are blank.
I source sims on eBay $0.99 per piece from a seller in FL who ships same day free shipping.

mrmwroot said:
I get 6-8 MBPS (and up to 21 MBPS) down with these settings Net10 on AT&T northeast Atlanta:
APN: tfdata
MMSC: http://mms-tf.net
MMS proxy: mms3.tracfone.com
MMS port: 80
MCC: 310
MNC: 410
APN type: default,supl,mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
MVNO type: None
All other fields are blank.
I source sims on eBay $0.99 per piece from a seller in FL who ships same day free shipping.
Click to expand...
Click to collapse
Is the LTE symbol lighting up? Mine came from Quality One Wireless in FL for $0.99 (http://www.net10wirelessphones.com/Net10-sim-card-byop-kit.html). Don't know if it's the same seller as you had on ebay. Did yours come with a red activation card showing the settings you used, or ones more like the ones I listed? I found more information about settings which made me try the one I have at: http://www.prepaidphonenews.com/2012/09/how-to-setup-straight-talk-data-and-mms.html

larry62 said:
...a red activation card showing the settings you used, or ones more like the ones I listed?
Click to expand...
Click to collapse
Good settings are the ones that work. Your mileage may vary.
Cheers.

I got same problemas here.
The tfdata APN don't work on my moto x .
But the mvno APN works but h+ no LTE any help?
Sent from my XT1058 using Tapatalk

I'm on NET10, and I run the stock APN settings given by the NET10 app on the Playstore, I was too lazy to reinput some of my old crazier APNs.
https://play.google.com/store/apps/details?id=com.tracfone.net10.datasettings&hl=en
I get LTE, and everything functions accordingly.
Don't worry about the sim card, I cut mine by hand, it takes a few bits to set up the radio and all the fit bits within. After the first day, everything is fine.

maniacopr said:
I got same problemas here.
The tfdata APN don't work on my moto x .
But the mvno APN works but h+ no LTE any help?
Sent from my XT1058 using Tapatalk
Click to expand...
Click to collapse
The tfdata (the APN that's also provided through the NET10 app in the Play store) APN is the correct one for getting LTE. I had the same problem, as I was unable to get data on tfdata and only getting HSPA+ on the wap.tracfone APN. I called the BYOP support line (1-855-333-CELL) and they verified I had the tfdata APN settings correct, then "updated my line." Boom, LTE.

gofunburnmann said:
The tfdata (the APN that's also provided through the NET10 app in the Play store) APN is the correct one for getting LTE. I had the same problem, as I was unable to get data on tfdata and only getting HSPA+ on the wap.tracfone APN. I called the BYOP support line (1-855-333-CELL) and they verified I had the tfdata APN settings correct, then "updated my line." Boom, LTE.
Click to expand...
Click to collapse
I'll give that a try soon. Got a new nano SIM I stamped out of a micro directly from NET10 and not a reseller. Need to port my existing Verizon number out via Google Voice and sell an existing Verizon Unlimited Data plan via an AoL before picking up NET10 again. Found HSPA+ pretty good during my trial run, so it should be even better with LTE. During my test I think the old SIM I was using created the problem as nothing using tfdata worked at all.

larry62 said:
I'll give that a try soon. Got a new nano SIM I stamped out of a micro directly from NET10 and not a reseller. Need to port my existing Verizon number out via Google Voice and sell an existing Verizon Unlimited Data plan via an AoL before picking up NET10 again. Found HSPA+ pretty good during my trial run, so it should be even better with LTE. During my test I think the old SIM I was using created the problem as nothing using tfdata worked at all.
Click to expand...
Click to collapse
I'm really pleased with the HSPA coverage, so much that I would've left it as is if I could've gotten MMS to work. It's nice having that fallback, especially indoors or out in the boonies.
I bought my SIM from Wal-Mart. Strange, I would've expected SIM cards from official channels would work better than the reseller ones.

[Q] Anyone on AT&T notice extremely slow data speeds after Lollipop update?

It very well may be the location I am currently in, but I do not remember it being as slow as it is (under 5M d/l).
If not, can anyone verify for me the APN they are using?
My Current:
ATT Phone
MMSC: http://mmsc.mobile.att.net
Proxy: proxy.mobile.att.net
Port: 80
MCC: 310
MNC: 410
APN Type: default,supl,mms.hipri
IPv4
Thanks!

My bet is it is your APN. The first speed test I ran was really bad, but sheet I updated the APN I got the below results.
Use the APN I recommended on the AT&T APN XDA thread here--> http://forum.xda-developers.com/showthread.php?t=2172110
It will be much faster
Sent from my SM-N910T using XDA Free mobile app

I'm using the T-mo variant of the Note 4 with my AT&T service, with the "phone" apn settings. Really, I have tried 4 or 5 different AT&T apn settings, but on none of them do I get LTE.
I get horrible dropped calls, and can't make or receive calls from inside of any building. Does anyone know of how to help? Maybe AT&T hasn't provisioned me for LTE? Or something is wrong with the phone? Can someone please help?