[Q] how 2 format galaxy ace. - Galaxy Ace S5830 Q&A, Help & Troubleshooting

i want 2 format my ace & install android software again, so how can i do it on my own ?

flash the firmware you want using ODIN

If you are in stock ROM just do a factory reset and reboot
Sent from galaxy ace running S3 beta 3.1 evolution

Thewallwalle said:
i want 2 format my ace & install android software again, so how can i do it on my own ?
Click to expand...
Click to collapse
android software again? Did U Han Any Other OS That Was Not Android?
Just Flash With Odin

which rom ???? custom or official ?

myanmargunner said:
which rom ???? custom or official ?
Click to expand...
Click to collapse
That Would Be At Your Taste
but ... bare this in mind!
For stock Rom - Odin
For Custom Rom - Clockworkmode recovery

exactly, if you use custom rom , the better way to format is CWM, but,
else, use a factory reset in configurations menu, i think is enough for backup :good:

Related

Need help

Hey Guys,
I have Galaxy note GT-N7000
android ver. : 4.0.3
I wanna know how could I update to jelly bean or at least ICS 4.4 if there is no official version of JB for Note yet,
I'm afraid that I heard that there is a problem with the Kernel or something like this in galaxy note that I can't update to newer version of andriod,
could you tell me please how to do this safely without any harm ?!!
Once you flash stock ROM for your area then you will be able to update with kies/OTA (once it released to your area)
But incase if you are on any other ROM there will be option to update with Odin.
stay tuned to XDA.
do you have a costum rom or are you planning to get a costum rom??
if that is the case you can use odin to flash a safe kernel and then flash an unofficial costum rom...search in the forum...
if you are on stock rom and you plan on staying on stock rom you will have to wait till it releases and you can download it once its released
the thing about the ICS being unsafe applies only if you're rooting or flashing a costum rom...other then that you should be fine as far as I know.
just out of curiosity why is everyone so eager to get on ics or jb??I am still on gingerbread and I don't exactly need to update...
dr.ketan said:
Once you flash stock ROM for your area then you will be able to update with kies/OTA (once it released to your area)
But incase if you are on any other ROM there will be option to update with Odin.
stay tuned to XDA.
Click to expand...
Click to collapse
Thank you
Wafi0101 said:
do you have a costum rom or are you planning to get a costum rom??
if that is the case you can use odin to flash a safe kernel and then flash an unofficial costum rom...search in the forum...
if you are on stock rom and you plan on staying on stock rom you will have to wait till it releases and you can download it once its released
the thing about the ICS being unsafe applies only if you're rooting or flashing a costum rom...other then that you should be fine as far as I know.
just out of curiosity why is everyone so eager to get on ics or jb??I am still on gingerbread and I don't exactly need to update...
Click to expand...
Click to collapse
how to get safe kernel ? and how to flash kernel and costum rom ? sorry I'm newbie :$
I rooted ICS 4.0.4 by a way I found it in XDA forum and it is rooted safely but without CWM
about why i'm eager to get ICS or JB is that some people told me that it is better for battery usage , I'm not sure !!
Easiest way is flash safe kernel (Hydracore/speedmod) with Mobile odin.
dr.ketan said:
Easiest way is flash safe kernel (Hydracore/speedmod) with Mobile odin.
Click to expand...
Click to collapse
could you please post a download link and the installation method ?!
-Download This
http://hecubus.com/xda/kernel/HydraCore/GL_NOTECORE_HYDRACORE_v1_STD.tar
and copy to SD card
-Open mobile odin
-select kernel
-point to file you copied as above said
-Flash
dr.ketan said:
-Download This
http://hecubus.com/xda/kernel/HydraCore/GL_NOTECORE_HYDRACORE_v1_STD.tar
and copy to SD card
-Open mobile odin
-select kernel
-point to file you copied as above said
-Flash
Click to expand...
Click to collapse
Thnx so much
but I wanna know , after I flash it , what should I do ? install new rom or it will be back again to GB or what ?! sorry that is my first time to flash anything !!
You will remain same on ICS 4.0.4 by flashing this. But this is safe kernel, you will be safe from emmc brick bug, as well you can use its CWM to backup/restore nandroid, as well you can flash custom ROM.
dr.ketan said:
You will remain same on ICS 4.0.4 by flashing this. But this is safe kernel, you will be safe from emmc brick bug, as well you can use its CWM to backup/restore nandroid, as well you can flash custom ROM.
Click to expand...
Click to collapse
thank you , can I get CWM for my phone ? because the root method I used it doesn't have CWM !!
I tried it twice , every time I select the file from mobile odin , it hangs and this message appears ( unfortunately mobile odin has stopped )
dr.ketan said:
-Download This
http://hecubus.com/xda/kernel/HydraCore/GL_NOTECORE_HYDRACORE_v1_STD.tar
and copy to SD card
-Open mobile odin
-select kernel
-point to file you copied as above said
-Flash
Click to expand...
Click to collapse
Unfortunately. mobile ODIN has stopped.
what should I do ?!
Check you have proper root.
Find root checker from market
Install latest mobile odin
Sent from my GT-N7000 using xda premium
dr.ketan said:
Check you have proper root.
Find root checker from market
Install latest mobile odin
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Root Checker says it is rooted , I downloaded Mobile Odin v3.25 , but the same happened !!
free or pro version?
Free version seek thread on xda and follow instal instructions.
Pro version check if you have granted root rights in super user app.
edit:made little clearer
Sent with a grin (^.^)
baz77 said:
free or pro version?
Free version seek thread on xda and follow instal instructions.
Pro version check if you have granted root rights in super user app.
edit:made little clearer
Sent with a grin (^.^)
Click to expand...
Click to collapse
Thank you , now it is successfully worked
dr.ketan said:
You will remain same on ICS 4.0.4 by flashing this. But this is safe kernel, you will be safe from emmc brick bug, as well you can use its CWM to backup/restore nandroid, as well you can flash custom ROM.
Click to expand...
Click to collapse
i installed got brickbug app ,and it says : Danger this eMMC chip os known to have the brick bug !! after flashing the kernel
does that mean i still can't flash custom roms , factory reset or wipe on stock ICS 4.0.3 ?
After flashing safe kernel, you can safely wipe or hard reset.
And yes flash custom rom too, but before flashing custom rom you have to read instruction from custim rom thread op.
Sent from my GT-N7000 using xda premium
dr.ketan said:
After flashing safe kernel, you can safely wipe or hard reset.
And yes flash custom rom too, but before flashing custom rom you have to read instruction from custim rom thread op.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
is it safe to download and install roms from rommanager (CWM) ?! the rom is cyanogenmod 9.1.0 !!!
so sorry I know that i'm annoying and bothering u , but I really want to make sure that my phone will not break down !!

[Q] Best Kernel / Rom combination for the I9070

Hello,
So after getting some knowledge of the things (thanks Shut_Down :good, I was wondering which is the best combination for this phone?
Right now I am running the stock ROM and kernel.
Will the new official JB upgrade also change kernel or just ROM?
Since people here have already tried different combinations, which combinations have you found that give good, consistent and fast running?
Thanks!
R: [Q] Best Kernel / Rom combination for the I9070
I use stock ROM with thunderzap 3.5 kernel
Sent from my GT-I9070 using xda premium
KINGbabasula said:
I use stock ROM with thunderzap 3.5 kernel
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
chucky-bean v5 + cocore-E 2.9 nighly(CWM)
Chucky Bean v6; Cocore_E 2.9 CWM
Envoyé depuis mon GT-I9070
Well, I did't expect this...
Thanks for your replys!
Funny thing is that each of you have a different combination.
Any one actually did testing which combo is better? Or maybe i sould ask, why are you using he combinations you wrote?
KINGbabasula said:
I use stock ROM with thunderzap 3.5 kernel
Click to expand...
Click to collapse
Same here. Stock JB LQ4 + ThunderZap 3.5.
So I am guessing I will upgrade to the stock JB ROM (till there will be a JetMod version of JB).
1) Which would be a better kernel set CoCore or ThunderZap?
2) I am right now still running the stock GB ROM.
What would be the right upgrade process kernel update then rom, or rom and then kernel?
The reason I am thinking kernel first is because I still don't have a custom recovery (using the stock brand) so i can't backup or load new roms.
What do you think?
Thanks!
Одг: [Q] Best Kernel / Rom combination for the I9070
YMatrix said:
So I am guessing I will upgrade to the stock JB ROM (till there will be a JetMod version of JB).
1) Which would be a better kernel set CoCore or ThunderZap?
2) I am right now still running the stock GB ROM.
What would be the right upgrade process kernel update then rom, or rom and then kernel?
The reason I am thinking kernel first is because I still don't have a custom recovery (using the stock brand) so i can't backup or load new roms.
What do you think?
Thanks!
Click to expand...
Click to collapse
Try both and see what firs you better. And about order, you can install ROM with temp. CWM, but I suggest you use permanent, with custom kernel. So first kernel, than ROM.
Sent from Galaxy S Advance
Thanks mate! Again you helped.
If I install the stock ROM will I be able to get it in my local language (Hebrew), or do I need to download a specific ROM that is already in my language?
YMatrix said:
Thanks mate! Again you helped.
If I install the stock ROM will I be able to get it in my local language (Hebrew), or do I need to download a specific ROM that is already in my language?
Click to expand...
Click to collapse
Hm, on this Russian JB there is no Hebrew as I see. So if you want it you should wait for release for your country or any with your language.
shut_down said:
Hm, on this Russian JB there is no Hebrew as I see.
Click to expand...
Click to collapse
Where is this information posted? Because I checked sammobile, and I couldn't even find the GB version of my language
YMatrix said:
Where is this information posted? Because I checked sammobile, and I couldn't even find the GB version of my language
Click to expand...
Click to collapse
we actually have the ROM in our phone bro!
Brainiac.shri said:
we actually have the ROM in our phone bro!
Click to expand...
Click to collapse
You mean that each ROM usually supports all the languages?
YMatrix said:
You mean that each ROM usually supports all the languages?
Click to expand...
Click to collapse
a lot. but in this case hebrew isnt listed sorry!
Before installing a ROM is there an option to view which languages it supports?
Одг: [Q] Best Kernel / Rom combination for the I9070
YMatrix said:
Before installing a ROM is there an option to view which languages it supports?
Click to expand...
Click to collapse
No, unless dev write it on its thread.
Sent from Galaxy S Advance
OK, Thanks.
Last question, when just changing kernel, do I need to do any wipes / resets (I have read about dalvik cache, factory wipes etc.) ? Or is that just for when installing new ROM's?
YMatrix said:
OK, Thanks.
Last question, when just changing kernel, do I need to do any wipes / resets (I have read about dalvik cache, factory wipes etc.) ? Or is that just for when installing new ROM's?
Click to expand...
Click to collapse
roms only.
Hey sir plz help me...
I have samsung s advance... i9070
I flash it with odin to xxlpz 4.1.2
But its has so many buggs so I go to Samsung care to flash it back to 2.3
But they are saying my binaries are increased... so need to change my pci or bord...
And when I try to again update to ddl4 fremware it shows successful but phone was not starting...
Plz help me out sir..
Одг: [Q] Best Kernel / Rom combination for the I9070
Rahul125125 said:
Hey sir plz help me...
I have samsung s advance... i9070
I flash it with odin to xxlpz 4.1.2
But its has so many buggs so I go to Samsung care to flash it back to 2.3
But they are saying my binaries are increased... so need to change my pci or bord...
And when I try to again update to ddl4 fremware it shows successful but phone was not starting...
Plz help me out sir..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2100642
Sent from Galaxy S Advance

[Q] Vijay

Hey guys can I update my Jellybean SGSA with CWM 6.0 installed to LG prada 3.0 custom ROM or any other ROM
yes u can
yup u can install but first do a complete wipe...
Vijay
ksguptalive said:
yup u can install but first do a complete wipe...
Click to expand...
Click to collapse
Thanks for your quick reply bro..... But I entered into CWM and did a full wipe but the CWM recovery hangs and does not move from that point..... I had to remove the battery and reflash JB from Odin.... Kindly help....
vjkmr391 said:
Thanks for your quick reply bro..... But I entered into CWM and did a full wipe but the CWM recovery hangs and does not move from that point..... I had to remove the battery and reflash JB from Odin.... Kindly help....
Click to expand...
Click to collapse
You need to flash JB with Odin, and then do factory reset in recovery. You can't install custom ROM of JB while on GB and its custom recovery, because you do not install JB kernel with it.
P.S. Sorry, I understood that you want to go from GB to JB with custom recovery.
If you want to install custom ROM you need to ROOT your phone first.
Vijay
shut_down said:
You need to flash JB with Odin, and then do factory reset in recovery. You can't install custom ROM of JB while on GB and its custom recovery, because you do not install JB kernel with it.
P.S. Sorry, I understood that you want to go from GB to JB with custom recovery.
If you want to install custom ROM you need to ROOT your phone first.
Click to expand...
Click to collapse
Thanks for ur reply.... I would like to make it clear that I have already updated from GB to JB (Russian JB firmware) and rooted
and installed thunderzap kernel by Varun.chitre..... Just wanna know the steps to install Jetmod 3.0 by Varun on JB with TWRP or CWM
Thanks in advance
Одг: [Q] Vijay
vjkmr391 said:
Thanks for ur reply.... I would like to make it clear that I have already updated from GB to JB (Russian JB firmware) and rooted
and installed thunderzap kernel by Varun.chitre..... Just wanna know the steps to install Jetmod 3.0 by Varun on JB with TWRP or CWM
Thanks in advance
Click to expand...
Click to collapse
JetMod 3 is for Gingerbread, for Jelly Bean you should wait for JetMod 6.
Sent from Galaxy S Advance

[Q] How to uninstall Cyanogenmod 7?

I've been using CM 7 on my Samsung Galaxy Ace GT-S5830 and recently it has started to crash really frequently... So how do I remove it?
I understand that I'll have to download some "ROM" and go into download mode (how?) and then do something..
Please have in mind that my USB is NOT working for some odd reason but I can transfer files to my phone via Airdroid if transferring ROMs(?) is a thing I have to do.
EDIT: My android version CURRENTLY (with CM) is 2.3.7, before it was 2.0.2.
You're in the wrong section. Please post in the right section next time.
Try searching a flashable Stock ROM. If u don't find one, buy a new USB cable.
S5830i
Sent from the evil Broadcom Chip
Android-fany said:
You're in the wrong section. Please post in the right section next time.
Try searching a flashable Stock ROM. If u don't find one, buy a new USB cable.
S5830i
Sent from the evil Broadcom Chip
Click to expand...
Click to collapse
So I guess I'm staying with Cyanogenmod...
You can try a Stock Based Rom or even a CM 7 based ROM which is more stable.
A few good ROMs have been reviewed by me here,
http://forum.xda-developers.com/showthread.php?t=2297780
You can read and download the one u like or further you can visit my blog www.andro-sapien.blogspot.in
AnelReal said:
So I guess I'm staying with Cyanogenmod...
Click to expand...
Click to collapse
1. Flash your current official firmware via Odin
2. Upgrade to Gingerbread flashing a stock rom via Odin
I advice you to be careful flashing GB roms when you are using Froyo, so you should upgrade to GB before flashing a GB custom based rom
Here It's tutorial about how to flash/upgrade the GT-s5830 firmware
http://forum.xda-developers.com/showthread.php?t=1034145
Viper The Ripper said:
1. Flash your current official firmware via Odin
2. Upgrade to Gingerbread flashing a stock rom via Odin
I advice you to be careful flashing GB roms when you are using Froyo, so you should upgrade to GB before flashing a GB custom based rom
Here It's tutorial about how to flash/upgrade the GT-s5830 firmware
http://forum.xda-developers.com/showthread.php?t=1034145
Click to expand...
Click to collapse
His usb isnt workin so he cant use odin..
Just flash a new rom via cwm. Download the rom of your choice on you ace and then reboot to recovery, wipe data ,cache, dalvik cache and then flash the rom
Sent from my GT-S5830 using xda app-developers app
use mobil odin its work on phone you dont need to use a cable http://forum.xda-developers.com/showthread.php?p=35049645
It worked
Hi guys,
Follow the link
http://forum.xda-developers.com/showthread.php?p=35049645
I tried it on Samsung galaxy ace S5830 and I was able to uninstall cyanogenmod and install
S5830XWKTM_S5830OXXKT3_S5830XWKT7_HOME.tar.md5
now I have Android 2.3.6
Thanks for help
AnelReal said:
I've been using CM 7 on my Samsung Galaxy Ace GT-S5830 and recently it has started to crash really frequently... So how do I remove it?
I understand that I'll have to download some "ROM" and go into download mode (how?) and then do something..
Please have in mind that my USB is NOT working for some odd reason but I can transfer files to my phone via Airdroid if transferring ROMs(?) is a thing I have to do.
EDIT: My android version CURRENTLY (with CM) is 2.3.7, before it was 2.0.2.
Click to expand...
Click to collapse
There's no such thing as uninstalling a rom, just flash a new one and you're good to go

Galaxy S plus i9001-Ican't flash any custom Rom from stock Rom

I'm on stock Rom GB 2.3.6 on my Samsung s plus and I tried to flash any Cyanogen Custom Rom in CWM ( Ics and Jb) and Always i get the same answer . O f course I rooted My phone ,Installed CWM and did all the wipes .Always the same answer no matter what version of Custom rom I tried to flash.What can I do?
Makesure you have to use correct version of cwm to install the cm. I recommend try cyanogenmod 10.1 JB 4.2.x . GO to the cyanogen official rom post (under ADC team).
FOllow all the instruction that stated inside the topic.
Any mismatch of the version of installation can fail to install rom.
Example:
http://forum.xda-developers.com/showthread.php?p=42346733
Sent from my GT-I9001 using xda app-developers app
iulian vu said:
I'm on stock Rom GB 2.3.6 on my Samsung s plus and I tried to flash any Cyanogen Custom Rom in CWM ( Ics and Jb) and Always i get the same answer . O f course I rooted My phone ,Installed CWM and did all the wipes .Always the same answer no matter what version of Custom rom I tried to flash.What can I do?
Click to expand...
Click to collapse
You have i9001
The rom you try to flash is for i9000
mihaitosca said:
You have i9001
The rom you try to flash is for i9000
Click to expand...
Click to collapse
Exactly.
Looks like your installation is failing because the file is for an I9000B. If you want to use CM10.1 on an I9001, you'll need to go here.

Categories

Resources