[q] help with official jb 4.1.4 firmware - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

:cyclops:Hello friends of XDA
I recently saw a post on how to install INTETRNET JELLY BEAN (XXLRU) IN GALAXY NOTE N-7000.
My question is: THIS SOFTWARE SAYS BE FOR EUROPE, TO BE MORE SPECIFIC TO COUNTRIES United Kingdom, Germany, France, Spain, Austria, Belgium, Italy Etc. THAT MAY AFFECT ME if you installed it, I AM FROM MEXICO AND MY OPERATOR IS TELCEL?
IN FACT HAVE INSTALLED THE SOFTWARE FROM GERMANY XXLRQ ICS 4.0.4.
THANK YOU FOR YOUR ATTENTION AND here are the links where I saw him.
http://www.vickyz.com/how-to-update-galaxy-note-n7000-xxlru-android-4-1-4-latest-official-firmware/

xtc218 said:
:cyclops:Hello friends of XDA
I recently saw a post on how to install INTETRNET JELLY BEAN (XXLRU) IN GALAXY NOTE N-7000.
My question is: THIS SOFTWARE SAYS BE FOR EUROPE, TO BE MORE SPECIFIC TO COUNTRIES United Kingdom, Germany, France, Spain, Austria, Belgium, Italy Etc. THAT MAY AFFECT ME if you installed it, I AM FROM MEXICO AND MY OPERATOR IS TELCEL?
IN FACT HAVE INSTALLED THE SOFTWARE FROM GERMANY XXLRQ ICS 4.0.4.
THANK YOU FOR YOUR ATTENTION AND here are the links where I saw him.
http://www.vickyz.com/how-to-update-galaxy-note-n7000-xxlru-android-4-1-4-latest-official-firmware/
Click to expand...
Click to collapse
There is no JB update available for Note yet, the information in that link is incorrect.
And it's mentioned in the same link that it's 4.0.4
"Select files that you have to flash or install on your phone, files found from the extracted files after download of Android 4.0.4 N7000 XXLRU"

I don't think that software was really jellybean. As far as I know there is no official jelly bean update for N7000 yet. If I was you I wouldn't flash it, go with an unofficial build in android development section. As for language, you can select on boot so shouldn't matter, but I would still stay away from this '4.1.4 leak'
Edit: was beaten to it ^^ as jeetu1981said ^^

jeetu1981 said:
there is no jb update available for note yet, the information in that link is incorrect.
And it's mentioned in the same link that it's 4.0.4
"select files that you have to flash or install on your phone, files found from the extracted files after download of android 4.0.4 n7000 xxlru"
Click to expand...
Click to collapse
that's why i go with the experts
thanks for the help

I'll be brave and try it out. YOLO? lol
I'll be brave and try it out guys, backing up my phone as we speak, I'll update you with screenshots if it actually works.
Hopefully this won't brick my phone (I've fixed quite a few bricked phones in the past so I should be alright)

drewzxx said:
I'll be brave and try it out guys, backing up my phone as we speak, I'll update you with screenshots if it actually works.
Hopefully this won't brick my phone (I've fixed quite a few bricked phones in the past so I should be alright)
Click to expand...
Click to collapse
we'll don't say you were not warn.... no matter how techie you are... there are always things that gets out of your hands...

Fail
Didn't get to flash the rom. After the download finished, I extracted file and found out they've got the wrong files for odin..not even the right files for flashing through cwm

True that
letters_to_cleo said:
we'll don't say you were not warn.... no matter how techie you are... there are always things that gets out of your hands...
Click to expand...
Click to collapse
Yes, I do understand the consequences, but I just wanted to try it out since no one seemed to have tried it yet and see if the leak is legit. If all else fails I'll just claim insurance for it.

Already such experiment was made with
Odin
CWM
Mobile Odin
Nothing was useful, and this kind of thread already burried 2 days ago.

seems to be an OTA update?

there's none ever official JB release yet. I bet Official JB would come perhaps early next year.. I doubt it'll be primed for this year as there's still too much devices that needs to be upsold and marketed (with official stock JB already, e.g. Note 2). Once the new stocks are being sold in the mainstream... then that will be the time the official JB would be released.

Related

[Q] Froyo Upgrades for JG4-Base

Hi guys... anyone have any ideas when is the Froyo upgrades for JG4 base avaliable?
Same question. Anyone know?
You talking about DDJG4 ? or any other reagion
DDJG4 is for INDIA (INU)... and there is no froyo released yet... should be receiving it by end of the year
iamshridhar said:
You talking about DDJG4 ? or any other reagion
DDJG4 is for INDIA (INU)... and there is no froyo released yet... should be receiving it by end of the year
Click to expand...
Click to collapse
It's not only for India... It's also for Sri Lanka (Sales Code : SLK)
u must have a luck to get by this end of the year even u get sure have some flaws....
so no mean waiting just flash custom is best.....
DTJG4 is OPTUS stock firmware.
Looks like we are all in it togeather.
The European firmwares are far in advance of ours.
Greetings to everyone.
I have a DXJP2 ROM that I'm happy to share to the community. We'll need assistance in rooting and uploading said ROM. Cheers!
Not a relevant thread, delete.
waputchi said:
Greetings to everyone.
I have a DXJP2 ROM that I'm happy to share to the community. We'll need assistance in rooting and uploading said ROM. Cheers!
Click to expand...
Click to collapse
I'm interested. At least in the radio ROM!
You can download it from here:
http://rapidshare.com/files/428799373/I9000DXJP2-REV03-PDA-mid-CL558939.tar.md5
http://rapidshare.com/files/428799371/I9000DXJP2.tar.md5
http://rapidshare.com/files/428799370/GT-I9000-CSC-MULTI-OLB.tar.md5
http://rapidshare.com/files/428799374/s1_odin_20100803.pit
In Odin3 V1.3, check "repartition" and use 803.pit pile
Factory reset is required after binary download (*2767*3855#)
CSC Settings can be changed by typing *#272*IMEI NUMBER#
waputchi said:
You can download it from here:
http://rapidshare.com/files/428799373/I9000DXJP2-REV03-PDA-mid-CL558939.tar.md5
http://rapidshare.com/files/428799371/I9000DXJP2.tar.md5
http://rapidshare.com/files/428799370/GT-I9000-CSC-MULTI-OLB.tar.md5
http://rapidshare.com/files/428799374/s1_odin_20100803.pit
In Odin3 V1.3, check "repartition" and use 803.pit pile
Factory reset is required after binary download (*2767*3855#)
CSC Settings can be changed by typing *#272*IMEI NUMBER#
Click to expand...
Click to collapse
Thanks for that!
I think you should post this in a new thread. The DX region ROMs cover southeast Asia, and a lot of us would be interested. The pda may be older but the radio rom and csc are interesting.
Thanks Hardcore. Your comment is much appreciated. Can you please enlighten me on the things that make this ROM interesting?
To give you a little backgrounder Sir, I got hold of this ROM from my provider about 6 weeks ago just after Samsung failed to meet their September Froyo commitment. I was kinda adamant in making a thread on this ROM because I wasn't sure how the community will react to it given that it's a leaked ROM and there were already a number of ROM releases that were being modded and/or enhanced, even some that has higher build numbers like JP3 or JP6.
Let me assure you that I installed this ROM and found it to be very stable and fast and obviously, I pretty much wanted to root it and performed a lagfix (to make it faster and just to see the Quadrant numbers for the heck of it). But, since I'm not a software engineer / developer, there was obviously a lack of knowhow on my part to implement said operations.
During the course of this time, I made a number of PM's to several members asking their help on how to root it, but, their replies and suggestions to root this ROM pointed me to either JP6's or JPA rooting instructions, which using my common sense weren't applicable to the DXJP2 (if my conclusion is correct). I also fervently monitored the activity on this forum (which I haven't done for a number of years) hoping that finally there was someone who's able to get this ROM build besides me and who already found a way to a root solution, but up to now, there's not a single thread on this.
I hope that a good member of the community would stumble upon this thread and help us in rooting this build. In the meantime, until the root for this happens, I hope we can keep this in thread or until an official DXXX build comes out.
What do think my friend?
if i want to upgrade to a custom ROM which one is best suited for the JG4 firmware ???
Jest_SGS said:
if i want to upgrade to a custom ROM which one is best suited for the JG4 firmware ???
Click to expand...
Click to collapse
I'm using Doc's JPO 7.6.2 ROM as of the moment with an upgrade package that I edited using 7Zip, Stock AOSP lockscreen with extended power menu and battery mod. Oh, and I'm using the Hardcore's V2.2 - 200Mhz kernel.
I read somewhere in the XDA that there will be Froyo updates officialy available from 11th November and later on, like a couple of days after... Yet nothing for us JG4s... I have a DXJG4 with no good news...
Can someone confirm whether we will have this new update anytime soon?
If samsung is gonna hold longer than this then I'll deal with Froyo myself.
official Froyo update for JG4 was released yesterday November 19. Philippines
waputchi said:
I'm using Doc's JPO 7.6.2 ROM as of the moment with an upgrade package that I edited using 7Zip, Stock AOSP lockscreen with extended power menu and battery mod. Oh, and I'm using the Hardcore's V2.2 - 200Mhz kernel.
Click to expand...
Click to collapse
That's the way to do it, forget waiting on Optus etc to release anything.
I don't see what they shall bring to the table, Optus apps woopie do already got them & APN info etc from backups.
Only interest I have is to see what radio they use, however JPP is working well here so far.
Honestly, Optus doesn't have the man power anymore to go performing miracles like they did prior to Singtel taking over. The Optus geek pit on the 21st floor in North Sydney is RIP. I'd hate to see whom is in charge of doing the firmware releases these days. Guaranteed it's a clueless monkey or it is contracted out to another mob to save $ for Singtel
I'm from singapore, and i haven't get Froyo yet. ):
DXJG4.
Check your Kies, singapore's JPA is out
How about Malaysia? Froyo out yet?
Also can someone running stock dx post their CSC, modem and PDA codes so I can flash mine back and do the official kies update?

[Q] New Tab owner - quesion about upgrading to GB

Hi Guys,
I bought a Galaxy Tab P1000N and i have Froyo2.2
I would like to update to GingerBread 2.3 at least but with all the manuals out there, i'm affraid i'll brick it.
This is the info i have:
Model number GT-P1000N
Firmware Version 2.2.1
Baseband Version P1000NUBJM2
Build number FROYO.UBJM7
Can you please point me to the right manual? if it is even possible to update it?
I tried installing the latest Kies from the EU site, but it says my version is up to date..
Thanks,
Roi
can i say if you going to update to gingerbread you should use a custom rom based on gingerbread and the OVERCOME ROM is the best so far as for the battery life is amazing and the tab will be much faster ... head to their thread and read about it and step by step will will find everything you need to know ..
Thanks!
Medoo88 - 2 questions:
1. I need to be absolutely sure that with the specs i gave above, my tab will handle this.
2, Since you're in Egypt, this question is even more relevant: Does the Gingerbread ROM have good Arabic/Hebrew support?
Thanks,
Roi
Shalom
I used this thread: http://forum.xda-developers.com/showthread.php?t=1073854&highlight=tmobile+rom and it worked for me. I used the "with bootloader" methed.
Take your time and FOLLOW THE INSTRUCTIONS...I found CF-root 3.3 at another thread and used it.
Good luck.
captirwin said:
I used this thread: http://forum.xda-developers.com/showthread.php?t=1073854&highlight=tmobile+rom and it worked for me. I used the "with bootloader" methed.
Take your time and FOLLOW THE INSTRUCTIONS...I found CF-root 3.3 at another thread and used it.
Good luck.
Click to expand...
Click to collapse
Thanks!
Did you do it on a P1000N ?
How complicated is it? (not a complete noob at ROMs, but not familiar with tabs nonetheless..)
aldryk said:
Thanks!
Did you do it on a P1000N ?
How complicated is it? (not a complete noob at ROMs, but not familiar with tabs nonetheless..)
Click to expand...
Click to collapse
It started life as a Tmobile Model SGH-T849. After the GB upgrade, it now shows as a GT-P1000.
I am able to make and receive telephone calls with my tmobile sim. I'm very happy with the update. I have no data plan so don't know anything about that function. Very stable and working great.
I'm very new to all this. I took my time, followed the instructions and it work just like they said it would.
Overcome doesn't have Arabic language or locale, but at least two team members are Arabic or Egyptian, so they made a patch that you apply to the Overcome rom for those languages/locale of that region.
The reason kies says you are up to date is samsung hasn't released any new roms in your country.
Any tab with a sim card can be upgraded to 2.3.3.
Get the guide from Team Overcome, read everything twice. You have a windows 7 pc available?
Remember I told you to remember JM2. You'll understand later.
Rangercaptain -
Many thanks. thats the answer i needed.
Although i need a hebrew support and not Arabic, i still think its worth upgrading to.
I'll do the Overcome team patch, and will remember JM2
Yes i have Win 7 on my PC..
[Edit]
One thing i found out on Overcome website, is this announcement:
"Overcome ROMs/Kernels will NOT work with Latin American Tabs (the P1000L/N Galaxy Tabs)/CDMA-Based Tabs (If your Tab doesn’t have a SIM card, it won’t work…sorry!)/Wi-Fi Only Tabs (P1010 models!)"
Am I in the wrong place?
This is your thread:
http://forum.xda-developers.com/showthread.php?t=1124224
[Jul18][GSM][Kernel][Gingerbread][P1000L/N]
How did you end up with a South American tab in Israel?
Anyway, there are big differences with your N-model, in drivers (for the tv app, and the digitizer). Read it all, and let me know if you have any questions.
rangercaptain said:
How did you end up with a South American tab in Israel?
Click to expand...
Click to collapse
Orange Israel ran out of tabs. and offered to credit me if i buy one from other vendors, so i bought from a vendor who, probably, self imported it from South America..
Thanks for the help!

Help with a G Note XXLRK

Hi guys,
I buyed a G Note with this baseband: N7000XXLRK. Looking in the internet, some sites said this is Germany version, is that correct?
And, im from Brazil, i want to install the stock ROM from my country, could someone tell which ROM i should install? (Just link to thread, and i will search it) or i need a 4.1.1-4.1.2 ROM with full Galaxy Note features and Brazilian language.
I looked in the N700 Al stock ROMS but didn't find a compatible one
Thanks :good:
lock! said:
Hi guys,
I buyed a G Note with this baseband: N7000XXLRK. Looking in the internet, some sites said this is Germany version, is that correct?
And, im from Brazil, i want to install the stock ROM from my country, could someone tell which ROM i should install? (Just link to thread, and i will search it) or i need a 4.1.1-4.1.2 ROM with full Galaxy Note features and Brazilian language.
I looked in the N700 Al stock ROMS but didn't find a compatible one
Thanks :good:
Click to expand...
Click to collapse
My phone was on LRK but I'm from the UK
Mine was From Italia, i changed to LRK because Germany always gets the updates first (at least for note, or at least the last 3 major updates) and I'm from Venezuela..
I see no point on changing roms to brasil or any south American carrier.. They get the updates months after the official its released...
Tapatalking on my n7000
msedek said:
Mine was From Italia, i changed to LRK because Germany always gets the updates first (at least for note, or at least the last 3 major updates) and I'm from Venezuela..
I see no point on changing roms to brasil or any south American carrier.. They get the updates months after the official its released...
Tapatalking on my n7000
Click to expand...
Click to collapse
I know that, but, until the moment, this Germany or UK or who the hell know version didn't received update to jelly bean, or just my phone didn't find any update...
This baseband version have just received JB update?
lock! said:
I know that, but, until the moment, this Germany or UK or who the hell know version didn't received update to jelly bean, or just my phone didn't find any update...
This baseband version have just received JB update?
Click to expand...
Click to collapse
There is no official jb out yet, we're still waiting. There are leaked source jb roms which are as close to stock as possible like lsa or lsc but they still have bugs.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
There is no official jb out yet, we're still waiting. There are leaked source jb roms which are as close to stock as possible like lsa or lsc but they still have bugs.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Good to know this.
Thanks spidey :good:
Nevertheless if you want to install The Brazil rom head over to dr.ketan thread..it I'd a sticky
Sent from my GT-N7000000000 using Tapastalker 2
Btw, official jb is likely to be released soon, like within a month unless Samsung do as they did with ics and run over again, but judging by the leaks, that's doubtful I'd say.
Sent from my GT-N7000 using xda premium
Samsung promised JB to February?
That's good..
They have not promised anything whatsoever.
Sent from my GT-N7000000000 using Tapastalker 2

[Q] Confused about firmwares/county

Hi
Optimus rookie time. I have tried to understand from the faq but no one has answered this specifically that I can see. I'm in Australia, I have got an O4X from Kogan. It has arrived and has lots of Asian menu's, I have no idea if Taiwan, China or Singapore perhaps so far. It has lots of apps with 'hama' in the names if that helps. This is what is listed in about phone:
Software version: LG-P880-V10d-OCT-16-2012
Build number: IML74K
Baseband version: L6260_MODEM_SIC_02.1216.01
Kernal: 2.6.39.4
I would like to try JB, I get some people hate it, some say it is ok. If not, back to ICS or CM. Which JB firmware do I go for, the euro version or must I get the right regional version for my phone?? If so, can anyone tell what is is or is all that is important is v10d?
Thanks for any advice
Hi. I also got my 4X from Kogan, so I've been through the issues you've mentioned.
First thing I did was update to 4.1.2. I didn't spend any time with ICS, so I can't comment on differences - I WANTED JB and that was that! :cyclops: To update to 4.1.2, I used the LG update software – info about this procedure is here: http://forum.xda-developers.com/showthread.php?t=2069723
To check which version of the LG software to use, I used this URL: http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=
You need to put your IMEI (from Settings / About phone / Phone identity) in the url after "?esn=", and it returns the URL of the software you should download to update your phone. That told me to use the Taiwan version - I don't know if others (eg Europe) are compatible with our hardware - would be interested to hear!
2nd step was to root the phone (as an Aussie, you need to ignore the obvious sexual joke in that phrase!) – I used the instructions at http://forum.xda-developers.com/showthread.php?t=2180688 with some help from the better English at http://www.lg-phones.org/how-to-root-lg-optimus-4x-hd-android-4-1-jelly-bean.html [NB – the comment below this points out some errors].
The next step was to install Titanium Backup and use it to remove all the non-English apps. I had no problems with that step, so whatever they are, they're not critical.
G'day, nice one. Will look into links later. Appreciate the reply
Thinking about this a bit more, if you only want to flash the "official" (Taiwan, in your case) updated firmware for your phone, you can use the LG Update tool "as is". The instructions in my earlier post can be used to flash other versions and a lot of people seem to be using the Euro 20A. I'm out of my depth here though, so hopefully someone else can confirm:
Can any version (ie any country) firmware be flashed onto any 4x?
Ok, all done. Running jelly bean fine. Think it better than ics, using iodak kernel. Thanks for help. If anyone comes across this thread, when flashing to jb using kdz, the 100‰ battery is essential before flashing
359 said:
Ok, all done. Running jelly bean fine. Think it better than ics, using iodak kernel. Thanks for help. If anyone comes across this thread, when flashing to jb using kdz, the 100‰ battery is essential before flashing
Click to expand...
Click to collapse
Which version (country) did you use?
Taiwan as lg link suggested to. Running fine, not sure why so many knock it!

[Q] I9305 still on 4.1.1

hello,
i got a question, I wonder why my s3 is still on android 4.1.1. I cant update via kies or ota, it just says i already got the latest version. Does it have something to do with my provider (proximus) or the fact that I have the 4G version, that I seem unable to update to 4.1.2? also, i never rooted my phone and im not planning on rooting it either.
thanks
palmenmichiel said:
hello,
i got a question, I wonder why my s3 is still on android 4.1.1. I cant update via kies or ota, it just says i already got the latest version. Does it have something to do with my provider (proximus) or the fact that I have the 4G version, that I seem unable to update to 4.1.2? also, i never rooted my phone and im not planning on rooting it either.
thanks
Click to expand...
Click to collapse
I can't see any firmware from proximus on sammobiles, so there is a chance that it has not been updated for them, if you want 4.1.2 I would download the latest unbranded rom for the i9305 (be 100% sure that the model number is correct) you can then proceed to flash this via Odin, you will not need to be rooted and it will not affect the binary counter.
I suggest the unbranded rom because that comes straight from Samsung, and contains no carrier bloatware.
Next time please post your questions in the Q&A section, as it's against the rules to post questions in general discussion, I will report the thread and ask for it to be moved to Q&A for you
palmenmichiel said:
hello,
i got a question, I wonder why my s3 is still on android 4.1.1. I cant update via kies or ota, it just says i already got the latest version. Does it have something to do with my provider (proximus) or the fact that I have the 4G version, that I seem unable to update to 4.1.2? also, i never rooted my phone and im not planning on rooting it either.
thanks
Click to expand...
Click to collapse
I read an article about next update for SGS3... It says Samsung plannig to update SGS3 and Note 2 after Android 5 has came...
radamath said:
I read an article about next update for SGS3... It says Samsung plannig to update SGS3 and Note 2 after Android 5 has came...
Click to expand...
Click to collapse
Sry but you didn't read it right and it was not a Samsung statement (just a rumor), for now we wait for 4.2.2 or 4.3 on S3 and only in like 4-8 weeks at least.
delsus said:
I can't see any firmware from proximus on sammobiles, so there is a chance that it has not been updated for them, if you want 4.1.2 I would download the latest unbranded rom for the i9305 (be 100% sure that the model number is correct) you can then proceed to flash this via Odin, you will not need to be rooted and it will not affect the binary counter.
I suggest the unbranded rom because that comes straight from Samsung, and contains no carrier bloatware.
Next time please post your questions in the Q&A section, as it's against the rules to post questions in general discussion, I will report the thread and ask for it to be moved to Q&A for you
Click to expand...
Click to collapse
I would really prefer to not do anything with my phone, I tried rooting and custom rom and all that stuff on my transformer prime tablet and that didn't end good at all, so I really dont want to ruin my S3, as I have no idea what unbranded and Odin and carrier bloatware is... And sorry for the wrong section
Also when I look on this sammobile site for firmwares, I do not see my PDA number. My Baseband version is I9305XXALJ2 and buildnumber JR003C.I9305XXALJ3. I do not see those numbers anywhere on the site, and since you said I had to be absolutely sure I have the firmware with the right number, there is no firmware for my device or..?
latest is 4.1.2 on sammobile .
Updates Kies OTA are via your vendor . They may choose not to update .
jje
palmenmichiel said:
I would really prefer to not do anything with my phone, I tried rooting and custom rom and all that stuff on my transformer prime tablet and that didn't end good at all, so I really dont want to ruin my S3, as I have no idea what unbranded and Odin and carrier bloatware is... And sorry for the wrong section
Also when I look on this sammobile site for firmwares, I do not see my PDA number. My Baseband version is I9305XXALJ2 and buildnumber JR003C.I9305XXALJ3. I do not see those numbers anywhere on the site, and since you said I had to be absolutely sure I have the firmware with the right number, there is no firmware for my device or..?
Click to expand...
Click to collapse
The roms on Sammobile are completely stock, but if you have a carrier branded rom, and they haven't updated you to 4.1.2, and you don't want to mess around there isn't much you can do except wait.
But if you have the I9305 you can flash any I9305 rom.
Odin is a program leaked from Samsung it's what they use to flash test devices at the factory, unbranded is just a rom that has come from the manufacturer rather than carrier, and contains no carrier based boot animations or apps etc. Bloatware is unnecessary system apps (for most people) some examples are apps from your carrier.
Sent from my GT-I9300 using Tapatalk 4 Beta
but as I said before, my version isnt on the site :s so this means I cant update?
What do you mean your version .
jje
palmenmichiel said:
but as I said before, my version isnt on the site :s so this means I cant update?
Click to expand...
Click to collapse
Man, just download generic (not branded ROM) for your region and flash it via Odin 3.0.7. It takes about 5-6 minutes to flash and you'll be OK afterwards...
I never use branded fw. Every time I buy a new phone, put it to download mode right out of box and flash generic ROM.
palmenmichiel said:
but as I said before, my version isnt on the site :s so this means I cant update?
Click to expand...
Click to collapse
The Luxembourg version is now on sammobile and you should be able to update your phone via Kies. This is the version sold by Belgacom in Belgium as they also own Tango.
Mosquito2001 said:
The Luxembourg version is now on sammobile and you should be able to update your phone via Kies. This is the version sold by Belgacom in Belgium as they also own Tango.
Click to expand...
Click to collapse
well yes I checked for update today and there it was, 4.1.2, but not really happy about the update.. scrolling trough my text messages has gotten really slow and laggy and the gallerybis not really smooth anymore either, takes a few seconda before its ready.. ah well, on to 4.2.2!

Categories

Resources