Database Develop

Problem with flashing XWHTH/XWKT9

I sent it into warranty because I removed the data cable while it was flashing (Odin Multi Downloader (Android) was writing in the black box and it was stuck at MIBIB)
It had 2.3.6 XWHTH/XWKT4 installed.
When I recieved it I noticed it has 2.2.1 XXKB1/XWKA8. When connected to ODIN, it detects it, it adds it but in the black box mentioned above is still Odin Multi Downloader (Android)
I am afraid to start the update because .. you know.. I don't wanna send it again 300 miles away from here.
Is it safe to proceed?
ODIN v4.38
Tass v.1.0
.tar/.md5 file OK
:angel:

why not use the Odin created for galaxy mini which show gt-s5570

... Can you explain me.. A little more.. Like a link or something? :/
Sent from my GT-S5570 using xda app-developers app

I guess this Tutorial (http://forum.xda-developers.com/showthread.php?t=1255305) should be fair enough.
Follow the steps as mentioned there, with your current downloaded firmware.

coolsandie said:
I guess this Tutorial (http://forum.xda-developers.com/showthread.php?t=1255305) should be fair enough.
Follow the steps as mentioned there, with your current downloaded firmware.
Click to expand...
Click to collapse
Well... This is happening on my screen, it is the same like when the update failed.
I just want to know If I will not wreck my phone if I go with it.
www.flickr.com/photos/[email protected]3/7703931556/

Ginga:| said:
Well... This is happening on my screen, it is the same like when the update failed.
I just want to know If I will not wreck my phone if I go with it.
www.flickr.com/photos/[email protected]/7703931556/
Click to expand...
Click to collapse
I guess it fine, whether it shows Android or GT-S5570 (happened to me at times) Just use Tass_v1.0.ops and the one package system, your screenshot looks fine.
Just check whether your downloaded firmware is good, just try extracting.
Even I got the same error that you've mentioned in your first post, that MIBIB error message. Just try again. If it doesn't work download another version and try flashing it.
EDIT: Probably you won't brick your device because Odin will not flash the firmware past that MIBIB error.

[Q] P1000 Brick

Sorry for the long thread but please read and help me !
Sorry moderators i tried looking for my post didnt find where you placed it. so making a new and clear where i'll tell what i ve done to my tablet.
firstly my p1000 was froyo 2.2 and i didnt checked that and tried to upgrade it to jelly bean, that was the first stupidity of my.
while doing that i faced many problems and concluded that it was brick.
how ever i had rooted my phone with super one click root..
later when it was bricked i again rooted it with cwm recovery by help of cmd.
then it was more complex, i then tried to roll it back and installed the firmware but the firmware i installed was wrong region again it went more complex.
then from some thread, i again used odin and pit it and installed some other firmware. that didnt work so i did something with heimdall suite as it was instructed and mess something with zImage thing.. all failed.
now i ve finally came up with no solution and thinking what the mess i ve done.
please help me.
now odin dont recognize the phone.
the phone is booting till the samsung welcome screen i can also listen the sound.
it also goes to cwm recovery screen and also goes to downloading screen.
please tell me a way so that it can go to normal i am happy with 2.2 froyo only.
tell me a way, please give me download links so that i dont mess it again.
remember odin not accepting it, i ve charged the phone fully and also installed the samsung usb drivers but its not helping..

Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app

yes, i am sure it is because of heimdall suite,..
thanks a lot you are so helping i will be posting here only now

Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS

AvRS said:
Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS
Click to expand...
Click to collapse
i am really really sorry for all the inconvenience ,
i was a bit shocked as my tablet got bricked, so made such silly posts and created the problems.
but thanks for understanding my conditions.

priyana said:
Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
i would like to give you a big big big thanks for helping me out..
this forum is the best forum over the web as i got my problem solved,
not only helped me to unbrick my tablet but also now its upgraded to 4.1 jelly beans.
Priyana without you my tablet would be ended with a hard brick.
Thanks a lot.

No network !!
after all the hard work and all flashing thing, i upgraded it to Android 4.1.1 Jelly Bean via CyanogenMod 10
but now the problem is i cant find the network ..

Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin

glussier said:
Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin
Click to expand...
Click to collapse
i am sorry for not being clear, i was talking about the mobile network.
i searched on forum, and what i understand is i have to copy modem.bin file to data/vendor.
but i dont know which modem file to copy.

You can extract modem.bin from the rom that you have downloaded.

uryv
glussier said:
You can extract modem.bin from the rom that you have downloaded.
Click to expand...
Click to collapse
i did that... but still not able to make any calls. my sim card is working on other phone though.
have tried flashing modem.bin and also tried copy and paste in vendor folder.
but its not working searching all over the forum but i dont know what to do

Settings>about tablet>Status> Service state : out of service / Mobile network state : disconnected / MDN : unknown

Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app

priyana said:
Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
in gb stock safe, it was jpz modem file.. which i used to flash and it was flashed very well and there was no problem in anything.
later on when i upgraded for 4.1.1 it was also installed normally with no problem the only problem i encountered is i cant make any calls from it.
even the imei number is changed of my phone.
i also sticked the file in system/vendor .. i tried with the both file the jpz which i had from gb stock file and another from the firmware.
well now i trying to go for the latest cyanogen 4.1.1 hope everything get normal in it, and try to stick file in radio.
can you tell me particularly which file to copy and where ?
in gb stock jpz worked fine.. should i go for it ?

yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.

priyana said:
yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.
Click to expand...
Click to collapse
hmm yea you were right.. and it was stupid of me i was using a old version cyanogen.. it downloaded the latest nightly and it worked fine..
but i think something google apps that.. the apps are limited as earlier i used to keep on scrolling and the apps list was like infinite now it seems as there are just 200 apps in it..
give me a link of latest gapps file plzz

Gapps only a few apps in it.
http://goo.im/gapps
Choose correctly, ics or jb.
Sent from my GT-P1000 using xda app-developers app

[Q] Tab stuck on samsung logo after flashing, need help

My sister owns this tab, and she wanted me to update its firmware from stock 2.2 (froyo) to 2.3.6 (gingerbread). I followed a guide on youtube, and I downloaded the files provided in the description tab. The flashing went smoothly, but after rebooting, the tab won't get past the samsung logo. Have I killed her tab? If I did, she'd kill me too Please help..
Additional info:
Model: GT-P1000
FCC ID: A3LGTP1000
I think she bought the tab in germany, if so then what firmware should I download?
Is it possible to just download any FW file to use for flashing? If not can anyone please direct me to the proper firmware?
I've been googling for a day..Download 2 firmwares but still no luck.. also tried wiping user data and cache.
Thanks for any help..much appreciated!

You need to restore via Odin first download Odin then head over to this link
http://allkindfile.blogspot.com/2012/07/odin-flasher-and-original-ops-pit-file.html?m=1 scroll down to the bottom and find the Samsung galaxy tab pit for the gt-p1000 after that go to this link http://www.sammobile.com/firmwares/ and search your tablet in the search box and it should say Germany on it download that file. Boit into download mode i believe its voljme down + power. Open Odin and click pit and open the pit file you downloaded. Then click PDA and find the firmware you got from the last link. Then just hit start and you should be good to go
Sent from my SPH-L710 using xda premium

Thank you very much atlast someone replied!
Anyhow i downloaded the pit(s) for my device, but i got 4 pit files, (gt-p1000_mr, pit-909, pit-EUR and pit-p1) which one do i have to use?
Also i already downloaded 2 germany firmwares, one is released 2011, the other 2012. Theyre both at version 2.3.6, should i use them? or do i have to download a 2.2 froyo firmware (you said restore)
I'm really confused, but i'll try them all now. thanks very much!!!!!!

chir0n said:
Thank you very much atlast someone replied!
Anyhow i downloaded the pit(s) for my device, but i got 4 pit files, (gt-p1000_mr, pit-909, pit-EUR and pit-p1) which one do i have to use?
Also i already downloaded 2 germany firmwares, one is released 2011, the other 2012. Theyre both at version 2.3.6, should i use them? or do i have to download a 2.2 froyo firmware (you said restore)
I'm really confused, but i'll try them all now. thanks very much!!!!!!
Click to expand...
Click to collapse
I forgot to mention did you boot into recovery and wipe data and see if you got it to boot? Often times after an update you have to boot into stock recovery and wipe cache and factory reset but if that failes just use the pit gt-p1000 and the firmware I would try froyo then if that fails to work do 2011 then if that don't work try 2012 but always use the pit file if none of these work then it means your internal sdcard gave out. Also before trying all of this try doing a factory reset in recovery and if you get errors post a screenshot of it so I get a better idea of what happened. Hope this helps
EDIT: sorry just read the part where u already did the factory reset and wipe cache was it in stock recovery? And did you get any errors?
Sent from my SPH-L710 using xda premium

Yes i did try factory resetting and wiping off cache data every flash/recovery i do, but it doesnt help. when i reset userdata, it always says that it cannot access "system/csc/via/something", and rfs format failed on /dev/block/stl10. I know i'm doing something wrong and i just cant figure it out because there are thousands of threads here, sticky posts doesn't help..im no techie guy but im trying to deal with the situation with positive thinking.. anyway thanks for the help bud, please bear with me until i fix this off..thank you so much..

chir0n said:
Yes i did try factory resetting and wiping off cache data every flash/recovery i do, but it doesnt help. when i reset userdata, it always says that it cannot access "system/csc/via/something", and rfs format failed on /dev/block/stl10. I know i'm doing something wrong and i just cant figure it out because there are thousands of threads here, sticky posts doesn't help..im no techie guy but im trying to deal with the situation with positive thinking.. anyway thanks for the help bud, please bear with me until i fix this off..thank you so much..
Click to expand...
Click to collapse
Oh I see what happened has this tablet previously been rooted or on a custom ROM? Because normally when on a custom ROM specially with our tablets the partition format changes from rfs to ext4 because its faster and more reliable. That being said what your experiencing is your tablet trying to boot but its not the right format because touch wiz only runs on rfs format. This happened to my tablet too when I tried to restore to stock and all I did was flash the pit and the stock firmware in Odin and it booted right up. Took my tablet about 20 minutes the first time to boot up though but it eventually did.
Sent from my SPH-L710 using xda premium

oh, is that the case? but my sister's tab isnt rooted nor had any custom roms before i flashed it. it was on stock firmware.. would it really take that long (20mins+) for a newly flashed device to boot up? approximately how long would should i keep it stuck at the samsung logo before i quit? im willing to wait hours, just for the tab to work. im gonna flash it again using 2.3.6 gingerbread firmware and a pit file using odin, and gonna let it stand until i wake up later and report the results. thank you so much!

chir0n said:
oh, is that the case? but my sister's tab isnt rooted nor had any custom roms before i flashed it. it was on stock firmware.. would it really take that long (20mins+) for a newly flashed device to boot up? approximately how long would should i keep it stuck at the samsung logo before i quit? im willing to wait hours, just for the tab to work. im gonna flash it again using 2.3.6 gingerbread firmware and a pit file using odin, and gonna let it stand until i wake up later and report the results. thank you so much!
Click to expand...
Click to collapse
I would say wait 20 minutes or just stare at the Samsung logo if it appears to blink and stay at the Samsung logo then your still in a boot loop BTW how did you update the tab? If you did it correctly it should have been just OTA correct? Or did you flash it manually in stock recovery?
Sent from my SPH-L710 using xda premium

jazz995756 said:
I would say wait 20 minutes or just stare at the Samsung logo if it appears to blink and stay at the Samsung logo then your still in a boot loop BTW how did you update the tab? If you did it correctly it should have been just OTA correct? Or did you flash it manually in stock recovery?
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
i flashed it using odin the first time, using a german firmware+pit file i downloaded at sammobile. is that called stock recovery? YES, the samsung logo blinks, so i am in a boot loop now..how can i fix this.. my sister's getting angry now i really need to fix this asap
ps. what is OTA?

chir0n said:
i flashed it using odin the first time, using a german firmware+pit file i downloaded at sammobile. is that called stock recovery? YES, the samsung logo blinks, so i am in a boot loop now..how can i fix this.. my sister's getting angry now i really need to fix this asap
ps. what is OTA?
Click to expand...
Click to collapse
OTA stands for over the air update and well do you still get errors in recovery? And did you flash that pit file with all the other firmwares u had?
Sent from my SPH-L710 using xda premium

i fixed it, finally.
i followed instructions from the Overcome Rom 4.0 tutorials by sos_sifou which is located on the samsung galaxy tab general forum.
first, i downloaded the GB-stock-safe-v5 rom, flash the pda, pit, and the phone modem.bin file. i think what my error really is was i wasn't adding a modem file. after flashing, still i got a couple of errors in recovery mode BUT after it restarted by itself, it booted right away, no 20 minute waiting time. then from there, i was really happy that i managed to fix it but i had gone for a little more. i installed overcome kernel and rom which i was glad i did, its really fast now, and really stable. instructions are easy to follow, you cant miss anything but as pre se, you have to follow everything carefully.
thanks anyway for all the help dude, i wish you also could fix your bricked tab? i read your thread a while back, good luck to you

chir0n said:
i fixed it, finally.
i followed instructions from the Overcome Rom 4.0 tutorials by sos_sifou which is located on the samsung galaxy tab general forum.
first, i downloaded the GB-stock-safe-v5 rom, flash the pda, pit, and the phone modem.bin file. i think what my error really is was i wasn't adding a modem file. after flashing, still i got a couple of errors in recovery mode BUT after it restarted by itself, it booted right away, no 20 minute waiting time. then from there, i was really happy that i managed to fix it but i had gone for a little more. i installed overcome kernel and rom which i was glad i did, its really fast now, and really stable. instructions are easy to follow, you cant miss anything but as pre se, you have to follow everything carefully.
thanks anyway for all the help dude, i wish you also could fix your bricked tab? i read your thread a while back, good luck to you
Click to expand...
Click to collapse
Its still at Samsung they charge me $170 cuz I got a suggestion to flash overcome and I bricked it so I just bought a different one
Sent from my SPH-L710 using xda premium

That is because yours is CDMA tab.
Overcome is for GSM only.
Sent from my GT-P1000 using xda app-developers app

jazz995756 said:
Its still at Samsung they charge me $170 cuz I got a suggestion to flash overcome and I bricked it so I just bought a different one
priyana:
That is because yours is CDMA tab.
Overcome is for GSM only.
Click to expand...
Click to collapse
That's some really bad thing that's gone, anyway if you can afford the $170 then why not? instead of just forsaking the tab away. again thanks for all the help dude, it was my first time flashing android devices, but not nokias. it was different in someway, anyhow just always be cautious of what you do always. please close thread tnx

i need help
chir0n said:
i fixed it, finally.
i followed instructions from the Overcome Rom 4.0 tutorials by sos_sifou which is located on the samsung galaxy tab general forum.
first, i downloaded the GB-stock-safe-v5 rom, flash the pda, pit, and the phone modem.bin file. i think what my error really is was i wasn't adding a modem file. after flashing, still i got a couple of errors in recovery mode BUT after it restarted by itself, it booted right away, no 20 minute waiting time. then from there, i was really happy that i managed to fix it but i had gone for a little more. i installed overcome kernel and rom which i was glad i did, its really fast now, and really stable. instructions are easy to follow, you cant miss anything but as pre se, you have to follow everything carefully.
thanks anyway for all the help dude, i wish you also could fix your bricked tab? i read your thread a while back, good luck to you
Click to expand...
Click to collapse
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:29 PM ---------- Previous post was at 11:28 PM ----------
jazz995756 said:
Its still at Samsung they charge me $170 cuz I got a suggestion to flash overcome and I bricked it so I just bought a different one
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:33 PM ---------- Previous post was at 11:29 PM ----------
jazz995756 said:
You need to restore via Odin first download Odin then head over to this link
http://allkindfile.blogspot.com/2012/07/odin-flasher-and-original-ops-pit-file.html?m=1 scroll down to the bottom and find the Samsung galaxy tab pit for the gt-p1000 after that go to this link http://www.sammobile.com/firmwares/ and search your tablet in the search box and it should say Germany on it download that file. Boit into download mode i believe its voljme down + power. Open Odin and click pit and open the pit file you downloaded. Then click PDA and find the firmware you got from the last link. Then just hit start and you should be good to go
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
please can i have the link to the pit file, the link is hosted on hotfile which is now down.

You may want to use the Overcome Method: http://forum.xda-developers.com/showthread.php?t=1881981
Sent from my GT-P1000 using XDA Premium 4 mobile app

tunjicool said:
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:29 PM ---------- Previous post was at 11:28 PM ----------
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:33 PM ---------- Previous post was at 11:29 PM ----------
please can i have the link to the pit file, the link is hosted on hotfile which is now down.
Click to expand...
Click to collapse
Ensure that you flashed a correct ROM for your tablet model, and that you cleared data when you flashed (from recovery).

xz124 said:
Ensure that you flashed a correct ROM for your tablet model, and that you cleared data when you flashed (from recovery).
Click to expand...
Click to collapse
thank you for this reply. though it came a bit late.
the device is dead!!!
if i on it now, it will only on the camera flash light as long as i hold the power button and then off the light when i release the button.
i don't know what to do.
i guess i can still get help on reviving it somehow or else i should start planning the burial .

[Q] My galaxy S4 active sgh-i537 is soft bricked, need help

My phone was rooted then it updated to the 4.3 and when i reset it because the galaxy play store was not working i tried to re root it and it got stuck on a screen upon boot that says Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. But when i go into Kies it just tries to connect and does't not recognize my phone. I need help on what to do please, I have tried everything.

lavorno said:
My phone was rooted then it updated to the 4.3 and when i reset it because the galaxy play store was not working i tried to re root it and it got stuck on a screen upon boot that says Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. But when i go into Kies it just tries to connect and does't not recognize my phone. I need help on what to do please, I have tried everything.
Click to expand...
Click to collapse
Do you have CWM installed?

tiskael said:
Do you have CWM installed?
Click to expand...
Click to collapse
no

lavorno said:
no
Click to expand...
Click to collapse
Sorry, should have read a bit closer. I was going to recommend that you use CWM to flash ROMs back but you don't have the i9295. Where did you purchase it from? I'm from Australia, so I'm not sure about the US, but I think I've read in other threads that some Best Buys(?) have Samsung stores in them that have reflashed the stock firmware free of charge without actually checking your warranty. Maybe you want to look into this?

tiskael said:
Sorry, should have read a bit closer. I was going to recommend that you use CWM to flash ROMs back but you don't have the i9295. Where did you purchase it from? I'm from Australia, so I'm not sure about the US, but I think I've read in other threads that some Best Buys(?) have Samsung stores in them that have reflashed the stock firmware free of charge without actually checking your warranty. Maybe you want to look into this?
The problem with your S4A is that it has a locked bootloader, so you can't flash firmware yourself, sorry!
Click to expand...
Click to collapse
I bought it in the US at a best buy so i will take it there and see what they can do, thanks for the help.

lavorno said:
I bought it in the US at a best buy so i will take it there and see what they can do, thanks for the help.
Click to expand...
Click to collapse
If you don't want to go to Best Buy right away you can try flashing the firmware yourself.
http://forum.xda-developers.com/showthread.php?t=2629093

If you took the official OTA for 4.3, ML2, there is no known root exploit available. Odin is easy to flash with - there are 1 clicks that do all the hard work for you, all you have to do is put your phone into download mode and the app does the rest on your PC. Make sure you have the proper drivers installed. Best way I found was to download the software suite from Samsung for the phone. Without the proper drivers Odin won't see the phone (I found this out the hard way.)

lavorno said:
I bought it in the US at a best buy so i will take it there and see what they can do, thanks for the help.
Click to expand...
Click to collapse
I just took it to best buy and they restored it and now it is as good as new, thanks for the advice.

lavorno said:
I just took it to best buy and they restored it and now it is as good as new, thanks for the advice.
Click to expand...
Click to collapse
No worries, I heard they were pretty good in the US. Remember though, you can't root it on 4.3 (yet). If they've set it back to 4.2.2 then you can root again and not update to 4.3. If they've set it to 4.3 then either you will have to follow @Devo7v's instruction to flash back or wait it out as a root method is currently being worked on.

Bricked SGH i537
my sghi537 has bricked. i can only enter into download mode..
As i downloaded stock firmware of 4.3 ML2 and i tried to flash it by Odin...
Unfortunately at first odin said that i have no pit partition...
then i downloaded Pit and tried to flash but ^^^ write failed ^^^ was the thing i saw every time...
I looked up my phn download mode screen and i found that ^^^ Write protection Enable ^^^
So i couldnt flash stock ML2 firmware and my phn is bricked ....
Someone pls help me...........

Shabnur said:
my sghi537 has bricked. i can only enter into download mode..
As i downloaded stock firmware of 4.3 ML2 and i tried to flash it by Odin...
Unfortunately at first odin said that i have no pit partition...
then i downloaded Pit and tried to flash but ^^^ write failed ^^^ was the thing i saw every time...
I looked up my phn download mode screen and i found that ^^^ Write protection Enable ^^^
So i couldnt flash stock ML2 firmware and my phn is bricked ....
Someone pls help me...........
Click to expand...
Click to collapse
What firmware were you originally on.

Devo7v said:
What firmware were you originally on.
Click to expand...
Click to collapse
I was in 4.3 Ml2
it will b a lot if u help me......
my phn is dead now..
Its saying try kies to recover firmware......

Shabnur said:
I was in 4.3 Ml2
it will b a lot if u help me......
my phn is dead now..
Its saying try kies to recover firmware......
Click to expand...
Click to collapse
Download the full ML2 Odin, check the MD5 to make sure you didn't get a corrupted download. MAKE SURE all the files are in the right place in Odin and flash away. It should put the stock firmware back on the phone. Then you can proceed from there.

Devo7v said:
Download the full ML2 Odin, check the MD5 to make sure you didn't get a corrupted download. MAKE SURE all the files are in the right place in Odin and flash away. It should put the stock firmware back on the phone. Then you can proceed from there.
Click to expand...
Click to collapse
Sorry to disturb u again..
i m new in advance user mode..
will u tell me how i can compare the md5 num..
i dont even no where it is..
pls help me a little bit more....

Shabnur said:
Sorry to disturb u again..
i m new in advance user mode..
will u tell me how i can compare the md5 num..
i dont even no where it is..
pls help me a little bit more....
Click to expand...
Click to collapse
The MD5 is sort of like the fingerprint for the file, so you need the MD5 of the file you downloaded to match the MD5 that was posted in the thread. Download WinMD5Sum from the website here. Under File Name load the ML2 Odin zip package that you downloaded. WinMD5Sum will generate the MD5 of the file you downloaded and you can compare that to the MD5 the uploader posted in the thread. If the MD5's match then that means you downloaded exactly what was posted. If the MD5's don't match exactly, then you have a corrupted download and need to download it again.

Please help

Hi im having difficulty restoring my g900a back to stock. i think i found the stock firmware from zedomax and it works but im still having a problem. on his video he is extracting ONE file but when i download the att firmware there is 4 and im pretty sure i need all the fiels to be flashed. is there a way to do that? here is the file http://galaxys5root.com/galaxy-s5-stock-firmware/
when i unzip there is 4 tar files. i did the biggest one but i think im missing the bootloader, recovery ect. please help anyone ive tried different stock firmwares on xda and all of them just fail. thanks guys.

What method are you using to flash? Odin or safestrap? Do you have safestrap installed?

feelinfroggy23 said:
Hi im having difficulty restoring my g900a back to stock. i think i found the stock firmware from zedomax and it works but im still having a problem. on his video he is extracting ONE file but when i download the att firmware there is 4 and im pretty sure i need all the fiels to be flashed. is there a way to do that? here is the file http://galaxys5root.com/galaxy-s5-stock-firmware/
when i unzip there is 4 tar files. i did the biggest one but i think im missing the bootloader, recovery ect. please help anyone ive tried different stock firmwares on xda and all of them just fail. thanks guys.
Click to expand...
Click to collapse
It might be the actual stock ROM (I didn't check that particular file you mentioned) but in general the stock ROM for this phone comes in four files which begin with the following:
AP, CP, CSC, BL
You can load those in their corresponding spots in Odin (BL in bootloader, and so on)
Or you can head over to sammobile and download the stock firmware, which is a Samsung Kies dump file. This is one giant tar ball ( like the one in the video) which you'll just load into the PDA section of Odin 3.09 and flash away.

When you're clicking on ODIN are you running it as Admin? Also see the guy in the video using a USB 2 cable.

yes i am running as admin. it only works when i only use pda. when i put in the bl and csc and cp is keeps failing. after if flashed the pda file the phone reboots and freezes on the samsung screen. should i try doing it one by one?

it wont work still failing. should i flash one by one?

I did but i cant load it. i only get to the samesung logo and it freezes. only thing i can get into is download mode and the stock recovery. is there a way to boot into safestrap when phone is off? im running out of ideas and ive tried to do it on different computers and cords.

it seems like the bootloader file is the only one not working. do you have any idea? please please please help guys

feelinfroggy23 said:
it seems like the bootloader file is the only one not working. do you have any idea? please please please help guys
Click to expand...
Click to collapse
Don't flash the bootloader and you should be fine

I tried that and it still freezes on Samsung logo. Does anyone have a legit firemware I've tried the ones on here or does anyone know how to get the one from sammobile? Really appreciating the help
Sent from my RM-975_1005 using XDA Windows Phone 7 App

Download the G900A_Downgrade_to_NCE.tar from here:
https://www.androidfilehost.com/?fid=23622183712464416
Use Odin 3.09 and flash in AP slot. Once it is done then take the OTA for NG3 then OA1
Thanks to @muniz_ri
Sent from my SAMSUNG-SM-G900A

Waiting4MyAndroid said:
Download the G900A_Downgrade_to_NCE.tar from here:
https://www.androidfilehost.com/?fid=23622183712464416
Use Odin 3.09 and flash in AP slot. Once it is done then take the OTA for NG3 then OA1
Thanks to @muniz_ri
Sent from my SAMSUNG-SM-G900A
Click to expand...
Click to collapse
the download says thats for the gs4?

feelinfroggy23 said:
the download says thats for the gs4?
Click to expand...
Click to collapse
It is the right tar. I have used it many times to go back to stock after root.
Sent from my SAMSUNG-SM-G900A

Can you walk me through your process please?
Sent from my RM-975_1005 using XDA Windows Phone 7 App

feelinfroggy23 said:
I tried that and it still freezes on Samsung logo. Does anyone have a legit firemware I've tried the ones on here or does anyone know how to get the one from sammobile? Really appreciating the help
Sent from my RM-975_1005 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Use the G900A_DOwngrade_to_NCE.tar from this link http://forum.xda-developers.com/att-galaxy-s5/general/how-to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120 and flash in the pda. that should fix your problem.

feelinfroggy23 said:
Can you walk me through your process please?
Sent from my RM-975_1005 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Download the G900A_Downgrade_to_NCE.rar. Unzip and you should get this file "G900A_Downgrade_to_NCE.tar.md5". Now Run Odin 3.09 as admin, and put your phone in download mode. In Odin click on the AP icon and point to the G900A_Downgrade_to_NCE.tar.md5. Wait until Odin finishes loading the file it takes some time. Plug usb cable to your phone while in download mode. Once Odin is ready click start. Wait until Odin is done. Your phone will reboot once the flash is done. Please Thank @muniz_ri for his hard work.

Yea. Prolly should have checked this forum before you went on the journey.
---------- Post added at 10:45 PM ---------- Previous post was at 09:56 PM ----------
Now, Instead of making sarcastic comments, I will provide some assistance. There is one thing left out of all of these tutes that took me a while to catch on to. As a result, my phone was doing the same thing.
When you follow the downgrade instructions, yes leave out the boot loader. Sometimes, the downgrade doesn't do the job properly, so you'll have to go to this thread, scroll to the very bottom post and you'll see a link for "G900A_NCE_Stock_Modem"
You will need to flash this along with the stock firmware. It should correct the boot issue. (Flash in PDA slot)
Furthermore, you will not be able to update via WiFi OTA. You'll have to download the official update files in .zip format.
Go to this thread for the " G900A_NCEtoNG3_OTA.zip" to update from NCE to NG3.
This next step is optional, but it won't hurt to try it. Go here and grab the stock NG3 modem and recovery. Flash each (one at a time) in the PDA slot.
My personal opinion of the 4.4.4 update is low. There are many issues with it. But if you're trying get the phone completely up to date then:
Go here for the final update.
You should now be set. Please thank @muniz_ri for his unrelenting dedication to helping others.
It is not my intention to be an ass, but you should begin with google, and then search entire AT&T forum before posting questions like this. Chances are, others have had the same problem, asked, and received a solution exactly like this.
Anyways, I hope I was able to guide you in the right direction...
Edit: It seems that both of the update zips are in the OA1 root guide thread.
P.S.
Your phone is from AT&T, right?