Database Develop

[Q] please help N7000XXLC1 GB to StUNNER ICS

hi all, i'm on GB 2.3.6 N700XXLC1 pre rooted ROM and trying to install CWM with no success. Downloaded CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5.zip and execute already-rooted.bat (USB debug is flagged, zimage file inside zimage folder and all the drivers are installed), the procedure starts but remain stuck in PUSHING ZIMAGE...(waited 30 min but NOTHING!)
Q: is this right or i need to downgrade to a directly rootable rom?
Q2: someone could explain the simplest procedure (step by step) with ALL the softwares and files needed to update from LC1 to stunner? I'm not asking all the links but file names and steps.
This is the lis of all the files i have downloaded till now:
1. Odin 1.85
2. pre rooted LC1 rom (installed - root ok)
3. CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5.zip (do i need it?)
4. I9220LP1-N7000-ICS-REPACK.tar (do i need it?)
5. ICS_Stunner_1.4.19.zip
PS i don't have mobile odin so please explain how to do with odin for pc
Thank you in advance and sorry for the incorrect english

I'm not very experienced with this, but someone just helped me the other day to go to ICS stunner from GB. I see you already installed a pre rooter ROM, thats good. After that I installed the ICS repack using the mobile odin app. Well worth the money seeing I installed the repack + the stunner rom within a couple of minutes.

mrmister80 said:
This is the lis of all the files i have downloaded till now:
1. Odin 1.85
2. pre rooted LC1 rom (installed - root ok)
3. CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5.zip (do i need it?)
4. I9220LP1-N7000-ICS-REPACK.tar (do i need it?)
5. ICS_Stunner_1.4.19.zip
PS i don't have mobile odin so please explain how to do with odin for pc
Thank you in advance and sorry for the incorrect english
Click to expand...
Click to collapse
Since you are rooted already u don't require the 3rd step. Just check your root once!
Download mobile odin free from market or buy it if you can.....then flash the #4. file the LP1 repack through mobile odin. If u use pc odin it will give u yellow triangle and you will have to get rid of it using another app - triangle away.
Boot into LP1 repack and let the room settle.
Then reboot to recovery wipe data and cache and dalvik then flash stunner and clear cache dalvik and data and rebooot. Done
Useful links in my signature if you require.

thank you both!
1 bought mobile odin pro and flashed CF-root (only now i see it was not necessary)
2 flashed LP1 repack (mobile odin pro)
3 reboot in recovery and installed stunner from sd card
DONE!
what is dalvik?
now i'm on stunner..there are other updates i have to do? modems etc? I heard there is an update for the tablet mode..going to search for it
EDIT: i found this fix http://forum.xda-developers.com/showpost.php?p=24860868&postcount=3865 how install it? recovery>install from sd or via mobile odin pro?
EDIT 2: windows xp says USB not recognized when i connect the phone to pc with GB was ok, what can i do?

mrmister80 said:
thank you both!
1 bought mobile odin pro and flashed CF-root (only now i see it was not necessary)
2 flashed LP1 repack (mobile odin pro)
3 reboot in recovery and installed stunner from sd card
DONE!
what is dalvik?
now i'm on stunner..there are other updates i have to do? modems etc? I heard there is an update for the tablet mode..going to search for it
EDIT: i found this fix http://forum.xda-developers.com/showpost.php?p=24860868&postcount=3865 how install it? recovery>install from sd or via mobile odin pro?
EDIT 2: windows xp says USB not recognized when i connect the phone to pc with GB was ok, what can i do?
Click to expand...
Click to collapse
You can flash LP6 modem, works great for me..
There is no "update" to tablet mode, just a zip to enable it if you would like to use tablet mode and it should be flashed through recovery..
That fix for phone crash in 160 dpi should be flashed from recovery, and for general knowledge most of .zip files are flashed through recovery, odin mostly uses .tar files
IIRC there is a post with PC drivers in the Stunner thread, search for it and try it

thank you matius!
i'm on GB 2.3.6. LC1 pre rooted again because the USB was not recognized with my first stunner flash...now USB works perfectly, i want to clean install stunner with clear steps so please i need someone who confirm i'm doing the right steps:
1 reboot in recovery and wipe (data - cache - dalvik cache)
2 reboot phone open mobile odin and install LP1 repack from ext SD card
3 do i have to reboot in recovery and wipe data/cache/dalvik cache after LP1 installation?
4 reboot in recovery and install ICS Stunner 1.4.19 from ext SD card
5 do i have to reboot in recovery and wipe data/cache/dalvik cache after Stunner 1.4.19 installation?
6 reboot in recovery and install ICS Stunner 1.4.25 repack from ext sd card
7 after that i want to install LP6 modem and 160 dpi fix (recovery or mobile odin?)
thank you in advance

mrmister80 said:
thank you matius!
i'm on GB 2.3.6. LC1 pre rooted again because the USB was not recognized with my first stunner flash...now USB works perfectly, i want to clean install stunner with clear steps so please i need someone who confirm i'm doing the right steps:
1 reboot in recovery and wipe (data - cache - dalvik cache)
2 reboot phone open mobile odin and install LP1 repack from ext SD card
3 do i have to reboot in recovery and wipe data/cache/dalvik cache after LP1 installation? No Not required.
4 reboot in recovery and install ICS Stunner 1.4.19 from ext SD card
5 do i have to reboot in recovery and wipe data/cache/dalvik cache after Stunner 1.4.19 installation? No just wipe data/cache/dalvik cache after the installation in done in recovery and before rebooting the phone.
6 reboot in recovery and install ICS Stunner 1.4.25 repack from ext sd card No wait for the next build 1.4.26 to come. Uploading now.
7 after that i want to install LP6 modem and 160 dpi fix (recovery or mobile odin?) Recovery
thank you in advance
Click to expand...
Click to collapse
Infact you can skip the LP1 repack step...check here- http://forum.xda-developers.com/showthread.php?t=1614443...but if you are comfortable you can go with it...no harm

mrmister80 said:
thank you both!
1 bought mobile odin pro and flashed CF-root (only now i see it was not necessary)
2 flashed LP1 repack (mobile odin pro)
3 reboot in recovery and installed stunner from sd card
DONE!
what is dalvik?
now i'm on stunner..there are other updates i have to do? modems etc? I heard there is an update for the tablet mode..going to search for it
EDIT: i found this fix http://forum.xda-developers.com/showpost.php?p=24860868&postcount=3865 how install it? recovery>install from sd or via mobile odin pro?
EDIT 2: windows xp says USB not recognized when i connect the phone to pc with GB was ok, what can i do?
Click to expand...
Click to collapse
Most of your questions seem answered however I noticed nobody mentioned what the dalvik is. First, to get to it:
Reboot into recovery->advanced->wipe dalvik ( and choose yes of course ), that should be done anytime you change roms and I do it every time I update a rom
Info on what the Dalvik Cache is:
Dalvik cache is a program cache area for the program dalvik. Dalvik is a java based virtual machine that is the bases for running your programs (the ones that have the .apk extension). In order to make access times faster (because there's not JIT (just in time) compiler installed by default), the dalvik-cache is the result of dalvik doing a optimization of the running program. Sounds confusing. It's similar to the prefetch files in Windows.

abhisahara said:
Infact you can skip the LP1 repack step...check here- http://forum.xda-developers.com/showthread.php?t=1614443...but if you are comfortable you can go with it...no harm
Click to expand...
Click to collapse
1 reboot in recovery and wipe (data - cache - dalvik cache) + install Abyss Kernel 4.2
2 (skip LP1 repack installation ok?)
3 while in recovery install ICS Stunner 1.4.19 from ext SD card (once is done no wipes right?)
3 reboot in recovery and install ICS Stunner 1.4.26 repack (when will be released, thank you) from ext sd card (once is done no wipes right?)
4 reboot in recovery and install LP6 modem and 160 dpi fix
ok?
skillz9669 said:
Most of your questions seem answered however I noticed nobody mentioned what the dalvik is. First, to get to it:
Reboot into recovery->advanced->wipe dalvik ( and choose yes of course ), that should be done anytime you change roms and I do it every time I update a rom
Info on what the Dalvik Cache is:
Dalvik cache is a program cache area for the program dalvik. Dalvik is a java based virtual machine that is the bases for running your programs (the ones that have the .apk extension). In order to make access times faster (because there's not JIT (just in time) compiler installed by default), the dalvik-cache is the result of dalvik doing a optimization of the running program. Sounds confusing. It's similar to the prefetch files in Windows.
Click to expand...
Click to collapse
very clear, thanks

mrmister80 said:
1 reboot in recovery and wipe (data - cache - dalvik cache) + install Abyss Kernel 4.2 having the redpill touch recovery > reboot recovery
2 (skip LP1 repack installation ok?) Yup
3 while in recovery install ICS Stunner 1.4.19 from ext SD card (once is done no wipes right?) Directly flash the ICS Stunner 1.4.26 , download from the Stunner thread
3 reboot in recovery and install ICS Stunner 1.4.26 repack (when will be released, thank you) from ext sd card (once is done no wipes right?) Not required
4 reboot in recovery and install LP6 modem and 160 dpi fix Yeah
ok?
very clear, thanks
Click to expand...
Click to collapse
Hope this helps!!

New User, have some questions

Hi guys, just got a Samsung Galaxy Note GT-N7000 dirty cheap from Hong Kong, and using it now in the states. I am a huge fan of rooting/flashing and stuff, so I decided to give myself a little test and see how long I can keep this phone stock. I lasted two days...haha.
So, I set out to see how to root this thing. After reading thread after thread, I learned about the wipe brick bug on stock Samsung kernels.
Now here's my question:
I want to use method 1A (to be safe) using this guide here, and it led me to this thread. Now here's where I get confused. Which kernel am I supposed to download and flash?
My Stock ROM system info (remember, this is from Hong Kong)
Model Number:
GT-N7000
Android Version:
4.0.3
Baseband Version:
N7000XXLR1
Kernel Version:
3.0.15-N7000ZSLPF-CL558440
[email protected] #3
SMP PREEMPT Tue May 15 15:39:39 KST 2012
Build Number:
IML74K.ZSLPF
Any for of enlightenment is greatly appreciated, thanks guys!

The easiest is flash a safe custom kernel that will be safe to wipe, provides root access, and has Clockworkmod Recovery. Below is how I setup my phone to flash Paranoidandroid. I started with a stock N7000XXLRT rom. I did install and run Triangle Away to later to remove the yellow triangle counter warning on boot. Largely cosmetic. Please check wikis of this speedmod kernel supports ICS 4.0.3.
If all you want is root and a safe kernel then you end with step 3 and apply Triangle Away.
1. Begin with a stock ICS rom on your Note.
2. Use Odin on the PC,select PDA, and flash speedmod-kernel-n7000-ics-k3-13-Odin.tar with usb cable. http://forum.xda-developers.com/showthread.php?t=1673072
3. After flashing speedmod kernel you will have root access, and a custom Clockworkmod Recovery in which to flash custom roms.
4. Get Paranoidandroid zip and Gapps zip from http://forum.xda-developers.com/showthread.php?t=1871713 . Copy the Paranoidandroid and Gapps zip files on your phone's internal sd card.
5. Backup efs folder just to be sure. Use kTool from Google Play or manually copy the EFS folder with Explorer+ also from Google Play. Copy the files to your pc.
6. Press power button, select reboot, reboot into recovery and go to backup and restore section and create a backup. Select go back and reboot.
6. Reboot into recovery (Clockworkmod Recovery) wipe cache partition, wipe data/factory reset, wipe dalvik cache (advanced).
7. From recovery, select install from zip from sd card. Select choose zip from internal sdcard. Select the Paranoid rom zip and flash. Do the same to flash Gapps zip. Go back and reboot.
*When flashing nightlies, no need to wipe cache, data, and dalvik. But install Gapps zip again in Recovery. You will need to set up your Google account again.

ginopunsalan said:
The easiest is flash a safe custom kernel that will be safe to wipe, provides root access, and has Clockworkmod Recovery. Below is how I setup my phone to flash Paranoidandroid. I started with a stock N7000XXLRT rom. I did install and run Triangle Away to later to remove the yellow triangle counter warning on boot. Largely cosmetic. Please check wikis of this speedmod kernel supports ICS 4.0.3.
If all you want is root and a safe kernel then you end with step 3 and apply Triangle Away.
1. Begin with a stock ICS rom on your Note.
2. Use Odin on the PC,select PDA, and flash speedmod-kernel-n7000-ics-k3-13-Odin.tar with usb cable. http://forum.xda-developers.com/show....php?t=1673072
3. After flashing speedmod kernel you will have root access, and a custom Clockworkmod Recovery in which to flash custom roms.
4. Get Paranoidandroid zip and Gapps zip from http://forum.xda-developers.com/showthread.php?t=1871713 . Copy the Paranoidandroid and Gapps zip files on your phone's internal sd card.
5. Backup efs folder just to be sure. Use kTool from Google Play or manually copy the EFS folder with Explorer+ also from Google Play. Copy the files to your pc.
6. Press power button, select reboot, reboot into recovery and go to backup and restore section and create a backup. Select go back and reboot.
6. Reboot into recovery (Clockworkmod Recovery) wipe cache partition, wipe data/factory reset, wipe dalvik cache (advanced).
7. From recovery, select install from zip from sd card. Select choose zip from internal sdcard. Select the Paranoid rom zip and flash. Do the same to flash Gapps zip. Go back and reboot.
*When flashing nightlies, no need to wipe cache, data, and dalvik. But install Gapps zip again in Recovery. You will need to set up your Google account again.
Click to expand...
Click to collapse
Thanks. So it doesn't matter that I am on Stock Samsung ICS ROM from Hong Kong?
And also, what version of Odin do I use, or does it not matter?

Yes. HK rom pretty much is the same kernel with local enhancements. The XXLR1 seems to be German or European. It should be ok. Again please verify if the speedmod kernel works with ICS 4.0.3. The site says ICS so I think it does.
I used Odin3-v1.85.zip. Make sure you have an excellent usb cable. Test the rig by copying large files between your pc and the Note internal sdcard.

2.3.6 to 4.1 , help

Hi,
Ive just bought a used Galaxy Note running Stock 2.3.6 (N7000XXLC1 Kernel an N7000XXLB2 baseband) and want to put the latest jellybean rom on.
Ive read through lots of threads about the brick warning and so on, i just want to know how to go from 2.3.6 and have it rooted and cwm on and the latest 4.1 leak or a modified 4.1
Could somebody please tell me the steps to do it as dont want to brick it and this 2.3.6 is rubbish
Matt

Hello!
I've rooted my Note like this:
#1
Get the original software (like N7000XXLRU - the file is 914Mb and it is a *.md5 file. ) and odin (Odin3 v1.87), install it in odin...how?
Open odin and put the file in PDA.
Option in odin leave alone (Auto Reboot & F. Reset Time; are selected)
Put Note in download mode: Volume Down Key + Home Key + Power Key; then Volume up key to continue
Connect the phone to computer
Odin recognize the phone and you will see it on COM port
Click Start
After several minutes the phone will turn on.
Now you have a original sw on your phone, and believe me this sw is GREAT...but if you want more...
#2
Root you phone
Described in this link (http://forum.xda-developers.com/showthread.php?t=1329360)
I used ''1A.Root + safe kernel + advance recovery''
Just read carefully (will write it down)
Visit this thread
http://forum.xda-developers.com/showthread.php?t=1901191
And download kernel in zip format according ROM you are having on device (just look for XXLRU-VDI; PhilZ-cwm6 v3.5 with CWM 6.0.1.8)
Copy downloaded file to Ext SD card to root directory (or any folder you make; I have ''A_ROOT'' for this things)
Reboot into recovery (Volume Up Key + Home Button + Power Key)
Select install(update) zip from ext SD card (Install zip >> Choose zip from sdcard; and click on the *.zip file)
select '[your downloaded kerenel].zip' which you have copied to Ext card above
Reboot device
Now you will have Root + safe kernel
And your phone is rooted now. You can have all the programs that work only when your phone is rooted (Titanium Backup, Root Uninstaller, Root Browser Lite, ...)
#3
Your phone is now ready to install all Android Development ROMs
Read each post ''How to flash'' it is easy
For instance I like stock rom and love 4.1.2, so i have sw from http://forum.xda-developers.com/showthread.php?t=1970626
Example:
Save *.zip on your SD/EXT Card (Ultimate N7000 XXLSA JellyBean 4.1.2 v5)
Restart in CWMR (Volume Up Key + Home Button + Power Key)
Be sure you're on SAFE KERNEL, then you can wipe (jes you are - on PhilZ-cwm6)
Full wipe /data/factory reset /cache and dalvik (dalvik is in advanced option)
Flash the ROM (Install zip >> Choose zip from sdcard; and click on the *.zip file)
Wait some minute until your phone boot!
You are done. That's all.
I've never had any problems with any of the ROMs. You can do the #3 1000 times and nothing will go wrong. Just remember to do a back up in CWM, when you have a rom that works great for you and you like. So if anything happens and you phone is stuck in ''samsung'' sing, you can go in CMW and restore it.
I hope it helps and I didn't forget anything.

Thanks so much for posting. I followed all the instructions and it worked fine. I have however gone and installed a 4.0.4 rom after using 4.1 for a bit and finding it too juddery.
Thanks again
Matt

No problem.
You can wait for the official firmware release and then everything will work 100%.

Since he didnt i hit thanks
Sent from my Amazon Kindle Fire using Tapatalk 2

Have hit thanks now , forgot!

[Q] Rooting Again after Roming?

I guess this counts as a noobie question. and if there is a tutorial - and a shut up this is not the palce for that please send me there.
I rooted my n7000 running current stock ICS.
I then did all the right things (Nandroid and backup) CWM etc. ....
I then installed the XLS2 Rom for JB - which is not rooted ..
[I then looked for ROOTS and have not yet suceeded but I did find a thread here with various options that I will try but .........}
BUT here is my confusion.
When I Romed to XLS2 - did I kill all my root things - including CWM?
Are my root items like CWM still on the machine somewhere or did the new Rom wipe it out?
I know I still have my nandroid BU - but not sure how to get to it.
Each time I ROM do I need to ReROOT on that ROM in order to access all the ways I have to swap around to the other roms and states I saved?
Thanks for any direction. I am really not a techie Noobie - but still missing something in this ROOT world
When I do a recovery boot - I don't seem to have any of my special root functions

To root Download and flash xxls2 from here
Recovery (.zip) packages instructions - Will also root your phone * recommanded method *
They come in the form of -signed.zip files that can be flashed in stock recovery 3e: No Yellow Triangle
* Download xxx-signed.zip kernel matching your ROM
* Put the previously downloaded xxx-signed.zip file on your external sd card
* Boot into stock recovery (volume up+home+power)
* Select "apply update from external storage".
* Now select the xxx-signed.zip file you copied in previous step
* You are rooted + new PhilZ-cwm6 kernel with CWM6
PhilZ-cwm6-XXLS2-XJB-v2.7 Jelly Bean LEAK
http://www.mediafire.com/file/c114d2yobdvhyl4/PhilZ-cwm6-XXLS2-XJB-2.7-signed.zip
http://www.mediafire.com/file/ploblxm2tvxss0i/PhilZ-cwm6-XXLS2-XJB-2.7.tar.md5
Sent from my GT-N7000 using xda app-developers app

If you are installing a stock rom using odin, you will loose root and will have to root. If you install custom roms using cwm, they are already rooted.
As above poster said, flash the philz kernel from stock recovery to get root

What a pleasure
Smokinggun said:
To root Download and flash xxls2 from here
Recovery (.zip) packages instructions - Will also root your phone * recommanded method *
They come in the form of -signed.zip files that can be flashed in stock recovery 3e: No Yellow Triangle
* Download xxx-signed.zip kernel matching your ROM
* Put the previously downloaded xxx-signed.zip file on your external sd card
* Boot into stock recovery (volume up+home+power)
* Select "apply update from external storage".
* Now select the xxx-signed.zip file you copied in previous step
* You are rooted + new PhilZ-cwm6 kernel with CWM6
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Thanks so much.
I can't tell you how many garbage ways to Root xls2 I got - this was great. I appreciate it
:good:

[Q] root problem

hello
im currently using an android 4.0.3 XXLQ3 rom
my main objective is to install PARANOIDANDROID rom:
http://forum.xda-developers.com/showthread.php?t=2115167
in order to get root+safe kernel + cwm i used phiz recommended method described here:
http://forum.xda-developers.com/showthread.php?t=1901191
after i flashed it i rebooted the device i now have cwm but i do not have root or supersu app and i dont know if im on safe kernel or not
i read on the forum that lq3 room has some sort of a space problem as described here
http://forum.xda-developers.com/showthread.php?t=1329360
saying:
1B.If you want just Root but not kernel, follow this
- Download Root_SuperSu 0.95
-Copy downloaded file to Ext SD card.
-Reboot into recovery (vol up+Home+power)
-Select install zip from ext SD card
-select 'root_SuperSU-*.zip' which you have copied to Ext card above
-Reboot device
-You can see superSU on appl drawer. open it and update.
-Now This will give you only SuperSU not busybox, though application which doesn't depends on system busybox will still works.e.g.Titanium Backup.
-To get full Root+busybox, Download Root_busybox *.zip
-Copy Root_busybox* only to Ext SD card
-Reboot into recovery, Select Install zip from Ext SD card. select Root_busybox* .zip and Flash.
-Done !
PS : If you can't see superSU after flashing above file(sometimes happen if there is too low space like in LQ3 ROM, then use this Root_superSU, followed by same above Root_busybox file.
Click to expand...
Click to collapse
so my questions are:
1. how do i get root from my current state? can i use the root_supersu in cwm instead of stock recover?
2. how can i tell if my kernel is safe atm? phiz is suppose to be safe but maybe if root failed the mmc_cap remove failed too?
soory for the long post
thanks in advance to all the helpers!

what is the name of the kernel( with extension) you flashed and how did you flash it?

nokiamodeln91 said:
what is the name of the kernel( with extension) you flashed and how did you flash it?
Click to expand...
Click to collapse
i flased PhilZ-cwm6-XXLQ3-OXX-3.99-signed.zip
i flashed it using stock recovery as the post described

that is correct file.. if you have cwm then the kernel has been installed... try to flash the kernel again from cwm... then reboot and see for a supersu app..

nokiamodeln91 said:
that is correct file.. if you have cwm then the kernel has been installed... try to flash the kernel again from cwm... then reboot and see for a supersu app..
Click to expand...
Click to collapse
i flashed it again using cwm i didnt see any error
still no root or supersu app i even downloaded root checker app and it says im not rooted

Hmmm. Try with the supersu zip that you mentioned earlier.

Try installing supersu from market (play store) and look if it works
Sent from my GT-N7100 using xda premium

dr.ketan said:
Try installing supersu from market (play store) and look if it works
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
it didnt work installling from the market.
i used Root_SuperSu -freespace and now im rooted
the last question i have now is my kernel safe?
phiz kernel suppose to be safe does super_su somehow overwrite the mmc_cap erase?

If your recovery is philz cwm then you have safe kern l
Sent from my GT-N7100 using xda premium

Nope. It's safe. Kernel is what has the erase command disabled and supersu just installs supersu

Thanks for everyone's help managed to root and install
u can close thread.

Ok