Probably done a great mistake by trying to downgrade to GB from ICS rooted.the CWM got stuck on flashing the GB modem.
restarted in recovery and tried to flash a hydracore kernel but no go here also stuck at "installing update".
Also tried to restore but it doesnt do anything.
What should i try now.
PLEASE HELP.
Flash stock rom via pc odin..
↖(^▽^)↗ Sent from Rego Galaxy Note ↖(^▽^)↗
---------- Post added at 05:58 PM ---------- Previous post was at 05:55 PM ----------
or It better to flash a pre-rooted GB rom via pc odin
↖(^▽^)↗ Sent from Rego Galaxy Note ↖(^▽^)↗
Avoid flashing roms with cwm, use mobile odin or pc odin
Sent from my GT-N7000 using xda app-developers app
Flashing a stock with Odin will help ?
I sure hope it will.
What did i do wrong ?
eng.rego said:
Flash stock rom via pc odin..
↖(^▽^)↗ Sent from Rego Galaxy Note ↖(^▽^)↗
---------- Post added at 05:58 PM ---------- Previous post was at 05:55 PM ----------
or It better to flash a pre-rooted GB rom via pc odin
↖(^▽^)↗ Sent from Rego Galaxy Note ↖(^▽^)↗
Click to expand...
Click to collapse
+1 that. Best way to downgrade is pc odin, rooted or non rooted GB
Sent from my GT-N7000
alex70b said:
Probably done a great mistake by trying to downgrade to GB from ICS rooted.the CWM got stuck on flashing the GB modem.
restarted in recovery and tried to flash a hydracore kernel but no go here also stuck at "installing update".
Also tried to restore but it doesnt do anything.
What should i try now.
PLEASE HELP.
Click to expand...
Click to collapse
First you need to know Hydracore is not supported on GB roms. Its for ICS/CM10/CM9/AOKP/AOSP/JB Roms.
Second what method you followed to downgrade.
Just do this.
If you have Mobile Odin :-
Download GB Rom From my Signature (PreRooted GB Rom)
Extract it on your phone.(Any Location)
Open it.
Select Rom file under Open .tar tab
Start Flashing.
Click Continue to complete the operation. Your phone will reboot to special mode and flash the rom. Done.
If you want to use PC Odin
Download GB Rom From my Signature (PreRooted GB Rom)
Open PC Odin on your PC.
Put your phone in download mode.
Connect it to PC using USB cable.
Select GB Rom file under PDA tab.
Click Start. (Do not change any options).
Wait for completion.
Your phone will reboot after success full flashing. If your phone doesn't starts or stuck at bootscreen after flashing then Go to Recovery by pressing Vol Up+Home+Power key and wipe Cache/Data and reboot.
Hope it helps
sahilarora2003 said:
First you need to know Hydracore is not supported on GB roms. Its for ICS/CM10/CM9/AOKP/AOSP/JB Roms.
Second what method you followed to downgrade.
Just do this.
If you have Mobile Odin :-
Download GB Rom From my Signature (PreRooted GB Rom)
Extract it on your phone.(Any Location)
Open it.
Select Rom file under Open .tar tab
Start Flashing.
Click Continue to complete the operation. Your phone will reboot to special mode and flash the rom. Done.
If you want to use PC Odin
Download GB Rom From my Signature (PreRooted GB Rom)
Open PC Odin on your PC.
Put your phone in download mode.
Connect it to PC using USB cable.
Select GB Rom file under PDA tab.
Click Start. (Do not change any options).
Wait for completion.
Your phone will reboot after success full flashing. If your phone doesn't starts or stuck at bootscreen after flashing then Go to Recovery by pressing Vol Up+Home+Power key and wipe Cache/Data and reboot.
Hope it helps
Click to expand...
Click to collapse
Thanks Man.
I don't use Mobile odin i'll try with the PC Version.
Should i flash a stock rom ICS \GB or can flash one of my custom roms with PC ODIN?
alex70b said:
Thanks Man.
I don't use Mobile odin i'll try with the PC Version.
Should i flash a stock rom ICS \GB or can flash one of my custom roms with PC ODIN?
Click to expand...
Click to collapse
You can flash Custom Roms using PC Odin but it will raise your counter and you have to reset it using Traingle Away. (If your phone Is under Warranty)
If not Who cares? Yes you can flash using PC Odin.
sahilarora2003 said:
You can flash Custom Roms using PC Odin but it will raise your counter and you have to reset it using Traingle Away. (If your phone Is under Warranty)
If not Who cares? Yes you can flash using PC Odin.
Click to expand...
Click to collapse
Thanks sahilarora2003 i'll try to flash the CleaNote V6.0 using ODIN.
Should i Flash the Hydracore kernel first ?
Can You explain about the Triangle away method because my Note is under Warranty.
alex70b said:
Thanks sahilarora2003 i'll try to flash the CleaNote V6.0 using ODIN.
Should i Flash the Hydracore kernel first ?
Can You explain about the Triangle away method because my Note is under Warranty.
Click to expand...
Click to collapse
There is a Thanx button for this. Use it lol eehehheh
And No. You don't have to flash kernel first. Just flash ROM directly by putting up under PDA tab.
For Traingle Away
Go Here.
http://forum.xda-developers.com/showthread.php?t=1494114
sahilarora2003 said:
There is a Thanx button for this. Use it lol eehehheh
Click to expand...
Click to collapse
+1
Sent from my GT-N7000
Related
Hey peeps iv got a big problem it happened yesterday with my Galaxy note GTn7000. I was on stock ICS LPT and was flashing new kernels through CWM when suddenly my phone just kept freezing on the Samsung screen when I start it up and it has been happening since yesterday. I think it was the speedmod ICS kernel that I flashed that made this happen. I flashed Abys kernel through odin and could get in to CWM. I did factory reset/wipe cache/dalvik/cache and then flashed checkrom which was on my SD card. Installation was fine but then it got stuck on the Galaxy note startup screen. I was searching for answers on the XDA forums and someone suggested that you flash a stock full wipe GB rom. So I tried to flash LC1 open Europe rom and was waiting for an hour the the rom to flash through ODIN which had only a bit left on the bar to flash and it didn’t flash it just froze. I tried 3 times and the same thing happened . I have used the USB jig to erase previous downloads and reset binary count. I flashed ICS LPT rom through odin and it flashed normally but when it starts up it gets stuck on the Samsung screen. Any suggestions? I can get into download mode and CWM so it means Im in a softbrick. Do you think I should download an ICS rom and put it on to my SD card and then try flashing it ? Help would be appreciated thanks.
Here is the video of what happens. Basically i have waited for 4 hours yesterday and it just stays on the samsung screen
Hey, Id recommend you flashing back to GB via ODIN before we continue.
ICS still has a few bugs and that could interfere with getting you back up and running.
Hey thanks i will download a new GB stock rom, i cant post the video link because im a new member dang...
azzledazzle said:
Hey, Id recommend you flashing back to GB via ODIN before we continue.
ICS still has a few bugs and that could interfere with getting you back up and running.
Click to expand...
Click to collapse
Flashed N7000XXLQ2_N7000XXLPT_N7000CPWLP4_HOME.tar GB rom, it restarted and still the same. Freezes on the Galaxy note startup screen
1st can i ask how are u flashing roms?
2nd i assume u are able to go into recovery?
steps to install customs roms
1-go recovery
2-flash abyss4.2
3-go advance -> reboot recovery
4-wipe cache n dalivk
5-flash custom roms
6-reboot
did u do this?
Thai Damen said:
1st can i ask how are u flashing roms?
2nd i assume u are able to go into recovery?
steps to install customs roms
1-go recovery
2-flash abyss4.2
3-go advance -> reboot recovery
4-wipe cache n dalivk
5-flash custom roms
6-reboot
did u do this?
Click to expand...
Click to collapse
Im flashing through ODIN. I did the abys kernel flash before and installed a custom rom but it still kept freezing. Now i am downloading the XLA3 GB rom and hope to flash it through ODIN
CODE_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5
EFS_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5
KERNEL_N7000XXLA3_CL880036_REV02_eng_mid_noship.tar.md5
Q1_20110914_16GB.pit
UMS_N7000XXLA3_CL880036_REV02_user_low_ship_16GB.tar.md5
MODEM_N7000XXLA3_REV_05_CL1095424.tar.md5
GT-N7000-MULTI-CSC-OXALA3.tar.md5
im gonna flash the XLA3 GB rom through ODIN. I dont know where all these files go in ODIN. Anyone ?...
IsmailZU said:
CODE_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5
EFS_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5
KERNEL_N7000XXLA3_CL880036_REV02_eng_mid_noship.tar.md5
Q1_20110914_16GB.pit
UMS_N7000XXLA3_CL880036_REV02_user_low_ship_16GB.tar.md5
MODEM_N7000XXLA3_REV_05_CL1095424.tar.md5
GT-N7000-MULTI-CSC-OXALA3.tar.md5
im gonna flash the XLA3 GB rom through ODIN. I dont know where all these files go in ODIN. Anyone ?...
Click to expand...
Click to collapse
So you've extracted the original tar file, you don't need to, just point the original tar file to the pda section of pc odin, it will sort out each partition for you.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
So you've extracted the original tar file, you don't need to, just point the original tar file to the pda section of pc odin, it will sort out each partition for you.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
its an .rar file. How do i change it into a tar file ?
Is it a rar. Or a zip? If it's a rar, re download from here http://forum.xda-developers.com/showthread.php?t=1424997 then extract one level with 7zip to get the tar file.
Sent from my GT-N7000 using xda premium
was in similar situation . flashed with ICS stock ROM after entering in to download mode as described here http://forum.xda-developers.com/showthread.php?t=1424997 using odin on laptop method. thanks
I recently upgraded my phone to g-note from s2, it came with gingerbread 2.3.6 out of the box and i couldn't wait to flash it with ICS.
I first tried rooting it first with that runme command prompt tool... but that wasn't successful at all, so i then tried to to flash it with
AbyssNotekernel42CWTouchOriginalLogo_2. After reboot my phone got stuck on the boot logo with a yellow triangle. I can still get
my phone into download mode. Problem is my phone has now got 3 counts of binary, can i still flash an official stock rom? What
can i do to fix this? Thanks in advance.
itswill7 said:
I recently upgraded my phone to g-note from s2, it came with gingerbread 2.3.6 out of the box and i couldn't wait to flash it with ICS.
I first tried rooting it first with that runme command prompt tool... but that wasn't successful at all, so i then tried to to flash it with
AbyssNotekernel42CWTouchOriginalLogo_2. After reboot my phone got stuck on the boot logo with a yellow triangle. I can still get
my phone into download mode. Problem is my phone has now got 3 counts of binary, can i still flash an official stock rom? What
can i do to fix this? Thanks in advance.
Click to expand...
Click to collapse
Calm down.
Before im proceed to gv u more info. Please NEVER do any factory reset and nandroid restore on unsafe kernel.
Sent from my GT-N7000 using xda premium
---------- Post added at 09:01 AM ---------- Previous post was at 08:52 AM ----------
itswill7 said:
I recently upgraded my phone to g-note from s2, it came with gingerbread 2.3.6 out of the box and i couldn't wait to flash it with ICS.
I first tried rooting it first with that runme command prompt tool... but that wasn't successful at all, so i then tried to to flash it with
AbyssNotekernel42CWTouchOriginalLogo_2. After reboot my phone got stuck on the boot logo with a yellow triangle. I can still get
my phone into download mode. Problem is my phone has now got 3 counts of binary, can i still flash an official stock rom? What
can i do to fix this? Thanks in advance.
Click to expand...
Click to collapse
Ok. Dont worry about the binary count and yellow triangle.
Your status consider safe and nothing to worry. As l can see u are from s2, therefore i think u will quite well understanding in terms of using pc odin.
It have a lot of method to flash stock or custom rom. Rather thru pc odin / mobile odin and recovery for custom rom in zip file.
1). Download any desire stock ics rom at sammobile.
2.) Unzip the rom file which u download from sammobile.
3. Open pc odin.
4). Boot ur phone into download mode. Connect usb cable to ur phone and pc.
5). Once connected and yellow colour comm appeared. Press pda button and choose the right file.( tar file about 850mb++).
6. Reminder: Do not tick any box other than what im mentioned here.
7). Press start ...you are done.
Sent from my GT-N7000 using xda premium
1.) Kick yourself.
2.)Read the instructions thrice before doing anything.
Now for the real stuff-
3.)Download any stock GB ROM.Stock Roms
4.)Wipe Data
5.)Root it by following the same thread.
6.)Install any ICS ROM.Follow the instrutions to the letter.Then use TriangleAway.apk to clear binary count.(Search the forum for the apk)
7.)You're done.
8.)If you have problems search for a solution.If you don't find it, ask.
Always happy to help
For simple rooting.
1). Download speed-mod k3-13 kerner ( odin version).
2). Flash it thru pc odin.
3). Wait phone reboot and settle down. Download triangle away and reset the binary count follow instruction given. Done.
Good luck mate.
Sent from my GT-N7000 using xda premium
thatks
thatks a lot guys, i apriciate.
lee yun khong said:
For simple rooting.
1). Download speed-mod k3-13 kerner ( odin version).
2). Flash it thru pc odin.
3). Wait phone reboot and settle down. Download triangle away and reset the binary count follow instruction given. Done.
Good luck mate.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Hey bro, he was/is on a GB ROM 2.3.x . How is installing an ICS Kernel(SpeedMod k3-13) going to help ?
itswill7 said:
I recently upgraded my phone to g-note from s2, it came with gingerbread 2.3.6 out of the box and i couldn't wait to flash it with ICS.
I first tried rooting it first with that runme command prompt tool... but that wasn't successful at all, so i then tried to to flash it with
AbyssNotekernel42CWTouchOriginalLogo_2. After reboot my phone got stuck on the boot logo with a yellow triangle. I can still get
my phone into download mode. Problem is my phone has now got 3 counts of binary, can i still flash an official stock rom? What
can i do to fix this? Thanks in advance.
Click to expand...
Click to collapse
Ur step is wrong buddy..
If want going to ics..
Just flashing ics using pc odin...
N rooting using pc odin with custom kernel..
Sent from my GT-N7000 using Tapatalk 2
Kernel
So can i just flash a GB stock kernel to fix it? i dont have a stable internet connection to download an offical ROM till tomorrow.
Do u still using abyss kernel?
If yes try using other kernel..
Stock kernel is good choise
hi
I lost my last sgn after super brick
now i m want to downgrade my phone from ics 4.0.4 to gb
i have not root my phone (fear from BRICK)
is it safe to flash gb rom (from ics) via pc odin
i want paranoid rom to flash (is it safe to install via CWM?)
if i want to come back on gb then my phone not bricked
one more q : when i install paranoid then i recover som space on hard disc ? ( because gb is 650 mb+ and paranod jelly bean is only <300 mb)
Simply flash pre rooted ROM from my signature with PC odin
After successfull flashing, wipe cache,delvic cache and data.
Then follow instruction on paranandroid ROM thread.
You cant manipulate system ROM space..
gurjit98 said:
hi
I lost my last sgn after super brick
now i m want to downgrade my phone from ics 4.0.4 to gb
i have not root my phone (fear from BRICK)
is it safe to flash gb rom (from ics) via pc odin
i want paranoid rom to flash (is it safe to install via CWM?)
if i want to come back on gb then my phone not bricked
one more q : when i install paranoid then i recover som space on hard disc ? ( because gb is 650 mb+ and paranod jelly bean is only <300 mb)
Click to expand...
Click to collapse
If u want flash paranoid u must rooted...
U will brick ur note if u do the wipe from stock kernel ics..
So,root ur note using cf root or other custom rom like notecore or speedmod using pc odin n flash custom kernel gb like abyss kernel..
Do full wipe on abyss kernel..
N flash paranoid..
Sent from my GT-N7000 using Tapatalk 2
dr.ketan said:
Simply flash pre rooted ROM from my signature with PC odin
After successfull flashing, wipe cache,delvic cache and data.
Then follow instruction on paranandroid ROM thread.
You cant manipulate system ROM space..
Click to expand...
Click to collapse
I HAVE DOWNLOADED FILE
N7000XXKL3_N7000ODDKL1_N7000DDKL1_HOME.tar.md5
CAN I FLASH THIS AND AFTER THIS ROOT MY PHONE
I HAVE PROBLEM WITH MY SLOW SPEED INTERNET TO DOWNLOAD NEW ROM
Yes you can flash that ROM too, and after flashing said KL3 ROM, just root + CWM from this post
http://forum.xda-developers.com/showpost.php?p=29755863&postcount=2
PS : Shouting really annoying.
dr.ketan said:
yes you can flash that rom too, and after flashing said kl3 rom, just root + cwm from this post
http://forum.xda-developers.com/showpost.php?p=29755863&postcount=2
ps : Shouting really annoying.
Click to expand...
Click to collapse
thanx for reply
one more q plz
when i install paranoid jelly bean then after some days naturali i want to came back on gb then what is way for me?
Again flash pre rooted gb rom. Or gb rom that you are having.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Simply flash pre rooted ROM from my signature with PC odin
After successfull flashing, wipe cache,delvic cache and data.
Then follow instruction on paranandroid ROM thread.
You cant manipulate system ROM space..
Click to expand...
Click to collapse
dr.ketan, my note is on stock ics no roms/root or anything pure sotck, wanted to go back to GB
i have the tar file for N7000JPLA1_N7000OJPLA1_N7000XXLA4_HOME.tar
will flashing via pc odin cause a brick ? and will the emmc fault still remain ?
Jpla1 is gb rom, you can flash with pc odin, after flashing you may find force close, but nothing to worry Reboot in recovery and wipe cache and data.
Once you are on gb rom no issue of brickbug.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Jpla1 is gb rom, you can flash with pc odin, after flashing you may find force close, but nothing to worry Reboot in recovery and wipe cache and data.
Once you are on gb rom no issue of brickbug.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
thanks,
sotck ics lags a lot and when i went to ssc they advised me they dont have currently the old rom so they told me to wait for an update to fix ics which i dont think i will go back to (for the time being)
i was worried that flashing the GB stock over the ics might brick the phone using pc odin so thx for your support
will install via pc odin then reboot in recovery (power up + home + power) factory reset after the gb kernel installs
hopefully get this big screen running again
---------- Post added at 07:46 PM ---------- Previous post was at 06:59 PM ----------
dr.ketan said:
Jpla1 is gb rom, you can flash with pc odin, after flashing you may find force close, but nothing to worry Reboot in recovery and wipe cache and data.
Once you are on gb rom no issue of brickbug.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
will it make a difference odin 1.85 or odin 3.0.4 ?
No, indeed I always using 1.85
Sent from my GT-N7000 using xda premium
Hello friends,
I'm using cm9 rom on my Samung Galaxy Note , now i wanna go back to stock rom and also wanna unroot my device.. can i just flash the stock rom and kernels directly or do i need to go through some other process.. and one more query is that , odin is not detecting my phone , so how can i flash the stock kernel and rom? ? reply Asap.. Thanks in advance
Yes flash straight way Stock GB ROM with Odin, then wipe cache and data.
Odin is not detecting then it is issue of driver. Uninstall kies and just install driver (find it from Toolbox on my signature)
..
dr.ketan said:
Yes flash straight way Stock GB ROM with Odin, then wipe cache and data.
Click to expand...
Click to collapse
But odin on pc isn't detecting my phone.. so any other way?
safijunaid said:
Hello friends,
I'm using cm9 rom on my Samung Galaxy Note , now i wanna go back to stock rom and also wanna unroot my device.. can i just flash the stock rom and kernels directly or do i need to go through some other process.. and one more query is that , odin is not detecting my phone , so how can i flash the stock kernel and rom? ? reply Asap.. Thanks in advance
Click to expand...
Click to collapse
Just flash stock GB rom using pc odin and you will be back to stock (unrooted as well). No need to flash kernel separately as flashing stock GB will also change kernel to stock. After flashing GB rom, you can either use odin to update to ICS or can use kies or OTA.
EDIT- Checked previous posts after posting mine
safijunaid said:
But odin on pc isn't detecting my phone.. so any other way?
Click to expand...
Click to collapse
Yes i have already edited my previous post. Another way is use Mobile Odin to flash GB ROM.
...
jeetu1981 said:
Just flash stock GB rom using pc odin and you will be back to stock (unrooted as well). No need to flash kernel separately as flashing stock GB will also change kernel to stock. After flashing GB rom, you can either use odin to update to ICS or can use kies or OTA.
EDIT- Checked previous posts after posting mine
Click to expand...
Click to collapse
lol.. nvm.. but any other possible solution?
safijunaid said:
lol.. nvm.. but any other possible solution?
Click to expand...
Click to collapse
Dr. Ketan is already here to help you, just follow what he says and everything will be alright
...
dr.ketan said:
Yes i have already edited my previous post. Another way is use Mobile Odin to flash GB ROM.
Click to expand...
Click to collapse
oh thanks..
@safijunaid
Just like the previous posts said, you need to remove PC KIES completely from your PC and reinstall it again. The problem on PC ODIN not detecting your phone is that, your PC might have some corrupted Samsung/adb drivers (needed by PC ODIN as well), Reinstalling PC KIES will reinstall those corrupted or missing Samsung drivers on your PC, hence, next time you plug back your phone to connect to your PC, PC Odin will rightly detect it already. (It would have a yellow box :COM on it whiche means it had already detected your device).
Hello everybody.
I have a problem in my gt-N7000.
I tried to install the CM10, install normal.
I installed Gapps also normal.
When I went to wipe it crashed.
Now no more enters recovery mode, download mode only.
When I turn it only gets in this mensage:
"Formware upgrade ancountered an issue. Pease select recovery mode in Kies & try again."
I've tried to pass other Stock Roms via Odim, but always hangs Odim.
I do not know what else to do, will my phone still has solution?
And have you tried that recovery mode in Kies?
Sent from my Galaxy S3 using Tapatalk 2
NuttyBunny said:
And have you tried that recovery mode in Kies?
Sent from my Galaxy S3 using Tapatalk 2
Click to expand...
Click to collapse
Hello,
Yes, but the Kies does not recognize and is carrying the cel.
I made a DESBRICK him, and now he is going into Recovery mode.
Now is no longer appearing that message gets stuck in samsung logo.
try flashing a safe kernel from odin first and try
Qwerty123 \m/ said:
try flashing a safe kernel from odin first and try
Click to expand...
Click to collapse
Kernel There are many available.
Could you direct me to one? for no errors
Edit: I tried flashing CM10, but it hangs and then resets.
where does the odin hang? and before install cm rom what rom & kernel were you on?
nokiamodeln91 said:
where does the odin hang? and before install cm rom what rom & kernel were you on?
Click to expand...
Click to collapse
Hello,
Unfortunately I do not know which kernel was using, but I was the Official Rom 4.0.3.
I'm downloading now the site of the kernel SamMobile'll try and pass via Odin.
If it does not work, post the error here ok?
Ok.. also.. what was your flashing method? which file did you flash first? was your phone rooted?
nokiamodeln91 said:
Ok.. also.. what was your flashing method? which file did you flash first? was your phone rooted?
Click to expand...
Click to collapse
I do not know if I can answer all your questions ... I did not root the phone.
I tried going through the kernel odin said that he caught up and in factoryms.img, as stated in the attached image.
Do not know if this is of great relevance but I can not give Wipe the recovery mode, it also crashes and resets the phone.
What should I do? = /
gabrielfonsecas said:
. I did not root the phone.
Click to expand...
Click to collapse
1. I don't know what you mean by this.? The was was not rooted or some one else rooted it for you?
2. The place where odin is stuck could indicate a brick. So you need to be precise in the info you give.
3. Did you use cwm.zip to install the rom directly on a non rooted phone?
If ODIN is working for you,
Get your mobile flashed with Philz Kernel by putting the TAR file on PDA.
Enter Philz Kernel in recovery and flash a ROM of your choice.
If you can't then u r a superbrick.
nokiamodeln91 said:
1. I don't know what you mean by this.? The was was not rooted or some one else rooted it for you?
2. The place where odin is stuck could indicate a brick. So you need to be precise in the info you give.
3. Did you use cwm.zip to install the rom directly on a non rooted phone?
Click to expand...
Click to collapse
Sorry for my english, I'm using google translation.
I was using the official version 4.0.3, so I entered the reovery and installed CWM and the file to the Root. Shortly thereafter, without restarting the phone installed the CM10 and then the gapps. When I do the Wipe the phone crashed.
Since then, officials have spent several Roms by Odin and all lock.
I do not know if I was very clear on the information, but now the phone is locked it sansumg logo. And when he enters recovery does not wipe, lock and resets the device.
Again, sorry for my english.
So you have flashed cwm.zip and the the root file and then on the same temp recovery, wiped.? That is serious mistake and it seems a brick.
---------- Post added at 12:31 AM ---------- Previous post was at 12:29 AM ----------
What you can try is go to this thread
http://forum.xda-developers.com/showthread.php?t=1424997
Download the PIT file, open odin and choose the file in PIT tab. Make sure the repartition is checked. Then load the rom in pda tab. Flash the rom again.
nokiamodeln91 said:
So you have flashed cwm.zip and the the root file and then on the same temp recovery, wiped.? That is serious mistake and it seems a brick.
---------- Post added at 12:31 AM ---------- Previous post was at 12:29 AM ----------
What you can try is go to this thread
http://forum.xda-developers.com/showthread.php?t=1424997
Download the PIT file, open odin and choose the file in PIT tab. Make sure the repartition is checked. Then load the rom in pda tab. Flash the rom again.
Click to expand...
Click to collapse
I will try, thanks!!
Wait so you were on stock4.0.3 or 4.0.4 ?
Nand corruption i guess ?
nokiamodeln91 said:
So you have flashed cwm.zip and the the root file and then on the same temp recovery, wiped.? That is serious mistake and it seems a brick.
---------- Post added at 12:31 AM ---------- Previous post was at 12:29 AM ----------
What you can try is go to this thread
http://forum.xda-developers.com/showthread.php?t=1424997
Download the PIT file, open odin and choose the file in PIT tab. Make sure the repartition is checked. Then load the rom in pda tab. Flash the rom again.
Click to expand...
Click to collapse
I did what you said.
Enter the field arquivo.pit PIT odin and rom in PDA. I marked the re-partition option and it hangs in the same place.
Will my cell phone died?
Seems you system partition got corrupted. Do you have warranty?
Qwerty123 \m/ said:
Wait so you were on stock4.0.3 or 4.0.4 ?
Nand corruption i guess ?
Click to expand...
Click to collapse
Hi,
was using the official 4.0.3!!
nokiamodeln91 said:
Seems you system partition got corrupted. Do you have warranty?
Click to expand...
Click to collapse
I was also thinking that. Unfortunately it is no longer under warranty.
The techniques assists solve this kind of problem?
Do you still have access to recovery? If yes is it cwm recovery or stock android 3e recovery?