Hi
how can i flash the original stock firmware from LG that came with the phone when i bought it ??
I want a hard-reset because i have changed some stock data without doing a backup and now i would get back to all the original stock files. Like the data on the phone when i bought it.
How can i get back to the original stock firmware so that every file is from the lg stock firmware 10F ??
samir23 said:
Hi
how can i flash the original stock firmware from LG that came with the phone when i bought it ??
I want a hard-reset because i have changed some stock data without doing a backup and now i would get back to all the original stock files. Like the data on the phone when i bought it.
How can i get back to the original stock firmware so that every file is from the lg stock firmware 10F ??
Click to expand...
Click to collapse
The only thing that change with the V10f is the performance, battery life and heat. A few more things maybe...
All the apps are the same, no more, no less.
By the way, whats your original firmware?
---------- Post added at 01:44 AM ---------- Previous post was at 01:41 AM ----------
RuedasLocas said:
The only thing that change with the V10f is the performance, battery life and heat. A few more things maybe...
All the apps are the same, no more, no less.
By the way, whats your original firmware?
Click to expand...
Click to collapse
Another thing, its enough when you do a reset to "factory settings"
my current firmware is the v10f .. but i have rooted my phony and changed or modifid some files. So now i wanna go back the original firmware (files) like the firmware when i bought this phone. I didn't make an Backup . My question is now: how can i flash a stock firmware from Lg ?
try this method:
http://forum.xda-developers.com/showthread.php?t=1861854
samir23 said:
my current firmware is the v10f .. but i have rooted my phony and changed or modifid some files. So now i wanna go back the original firmware (files) like the firmware when i bought this phone. I didn't make an Backup . My question is now: how can i flash a stock firmware from Lg ?
Click to expand...
Click to collapse
All versions published are stock, once bootloader is locked.
To flash you need to use the method that everybody use, there are differences between the "developer" phones and the retail ones only.
Just go to "how to flash" and its everything there. One more thing, don't take out the battery to enter in S/W mode.
I have tried this method but during the flash, my display shows only yellow pixel and nothing more... the flash wasnt successfull ??
ahhh cool ... now it works ... i don't have to put the battery out for the flash-process !!! THANKS
samir23 said:
I have tried this method but during the flash, my display shows only yellow pixel and nothing more... the flash wasnt successfull ??
Click to expand...
Click to collapse
Try this:
-Turn off your phone.
-Turnit on while you keep pressed "VOL-", you'll be in "Android system recovery".
-Select with the "Vol-" key, the option "wipe data/factory reset" than press the "On/Off" key to execute.
After finish that, just hit the "On/Off" button to "reboot system now".
Now, if your phone is not like from the factory, if you think that is missing something or something when wrong, try to flash it.
Don't forget that after you execute the "WindowsEnabler" you need to go to the task bar (down on the right of the screen) and click on the icon until you see "ON".
To connect the phone to flash, turn it off , with the phone off press the "VOL-" key and connect the cable ( must be connected on the pc first!)
Pay attention to the tutorial and don't take out the battery in any moment.
RuedasLocas said:
Try this:
-Turn off your phone.
-Turnit on while you keep pressed "VOL-", you'll be in "Android system recovery".
-Select with the "Vol-" key, the option "wipe data/factory reset" than press the "On/Off" key to execute.
After finish that, just hit the "On/Off" button to "reboot system now".
Now, if your phone is not like from the factory, if you think that is missing something or something when wrong, try to flash it.
Don't forget that after you execute the "WindowsEnabler" you need to go to the task bar (down on the right of the screen) and click on the icon until you see "ON".
To connect the phone to flash, turn it off , with the phone off press the "VOL-" key and connect the cable ( must be connected on the pc first!)
Pay attention to the tutorial and don't take out the battery in any moment.
Click to expand...
Click to collapse
YEAH right it works but i must do a full wipe before starting to flash
Maybe you can try "emergency firmware recovery" through LG PC Suite...
I think its the simplest way to refresh original firmware.
Related
i tried to upgrade my android from 2.1 to 2.2 now my Milestone is rebooting itself over and over again. I've tried taking out the battery, SIM card, and SD card, and nothing changes. It just keep booting up, then resetting itself.
i can not but links here .. so please go to youtube and see the video named..
Motorola Milestone rebooting restarting loop
If anyone has any suggestions, please comment. Thanks!
You may just have to flash back to stock and try again. Sometimes these things are really finicky.
nandroid - restore previous version
Jesushaxyou said:
You may just have to flash back to stock and try again. Sometimes these things are really finicky.
Click to expand...
Click to collapse
Thank you ..
But, What do you main flash back to stock...?
and how to do it..?
fabricaque nandroid - restore previous version
Click to expand...
Click to collapse
how can i do that..?
thanks
simple,
just flash the base room again (you will have to enter to the phone bootloader)
and continue from there to flash the ROM you want.
oshosh said:
simple,
just flash the base room again (you will have to enter to the phone bootloader)
and continue from there to flash the ROM you want.
Click to expand...
Click to collapse
In a nut shell this.
Find and download the stock OS file to your phone and install it via the bootloader.
I think if you do a factory reset on your phone it will start normally. Just turn on your phone pressing X and when you see a triangle with an exclamation point in the middle, hold volume up and press the camra button. Use the D-Pad to select the option and then select Yes and see iuf it works.
Btw Fosly, the upgrade of 2.1 to 2.2, are using the ota update / custom rom?
Try this -> http://forum.xda-developers.com/showthread.php?t=696845
Did u flashedthe base file on computer b4 flashing the rom ?
Or am i talking stupid things ?
Hello !!
I have just tried flashing my phone to V10A and I wanted to update to V10F (restoring to stock).
Now my phone is not starting and it starts ""vibrating"" and sometimes screen is orange and something blue ....
What should I do ?
downloaded .kdz from here: http://www.lg-phones.org/official-lg-optimus-4x-hd-firmwares-download.html
Followed this guide: http://forum.xda-developers.com/showthread.php?t=1861854
This is my first android phone so I need a lot of help. Did I completely brick it ? PLEASE HELP !
Woah, never mind. It was because I just inserted USB cable without the battery. I thought I'm screwed
Take a deep breath.... relax.....
Try doing it again.
Remember to put the battery back in after Step 5 in the guide
---------- Post added at 11:27 PM ---------- Previous post was at 11:26 PM ----------
Most of the people here get our firmware from here: http://lg-phone-firmware.com/
Thanks for posting, and I relaxed a little
Since this thread is already open, I would ask what should I choose at "PhoneMode" ? DIAG, CS_EMERGENCY or EMERGENCY ?
Stated in the guide. DIAG
Preparation:
Download the kdz file of your interest (any version will do) from http://lg-phone-firmware.com/index.php?id_mod=15
Download the necessary Windows softwares here http://www.4shared.com/zip/Gl2T6aLJ/KDZ_FW_UPD_P880.html
Download usbdriver for LG P880 from LG support website (LGUnitedMobileDriver - Ver 3.8.1)
Recovering steps:
[1]
Extract the KDZ_FW_UPD_EN.zip anywhere (example: C:\KDZ\)
Install msxml.msi (located in \KDZ)
[2]
Install the usb driver (LGUnitedMobileDriver - Ver 3.8.1)
[3]
Reebot your softbricked Optimus 4X in SW Upgrade mode (remove the battery, hold the (vol -) key and plug the cable in, remember not to press the on/off button, just hold down (vol -) and plug the cable in.)
"S/W Upgrade" texts will appear on phone screen, release the holding of (Vol -) and wait for Windows to finish installing drivers for each component: modem, port, etc.
[4]
Open the Windows "Device Manager" > Modems > disable the LGE Mobile USB Modem
Make sure the driver for LG port is correctly installed
If you put off SIM card before flashing, you may find Windows failed to install modem driver, yet disabling USB modem is still recommended just in case.
[5]
Insert back your battery
[6]
Run as administrator Windows Enabler.exe (KDZ\Windows Enabler.exe) --->Make sure to right click and Run as administrator... not double-clicking
After run the app, an icon will appear on your tray, single-click on the icon until the "ON" text appears over the icon
[7]
Run as administrator KDZ_FW_UPD.exe ---> Make sure to right click and Run as administrator... not double-clicking
[8]
Locate the .kdz file that you want to flash
[9]
Select the necessary options:
Type: "3GQCT"
Phonemode: "DIAG"
[10]
Click on "Launch Software Update" and don't click on anything else
[11]
Ignore the error log, it's normal, just click OK over the notification and let the software-updating progress finish about 5-7 minutes
[12]
WAIT until your phone reboots automatically, unplug the cable. and click on EXIT
[13]
The automatic booting may bring you to recovery mode
If this is the case, just do a hard reset (wipe data). The phone in this recovery mode might respond slower than normal, just be patient to wait the phone to respond after making an option
If you've got only boot loop after flashing .kdz, just get to android recovery mode by press and hold [vol -] and [power], then do a hard reset and reboot again
this guide i copy from facebook lg4x group
Yes, actually flashed already, now updating to v10f. After doing this and restoring to factory, is there any way of telling device was ever rooted ?
shiinkotheone said:
Yes, actually flashed already, now updating to v10f. After doing this and restoring to factory, is there any way of telling device was ever rooted ?
Click to expand...
Click to collapse
try this apps
actually i think after flash and factory reset, u need to root back ur phone
Flashing through the guide you are following and the one given by razerblade17 will REMOVE all root. So your device will be unroot as far as first boot is concerned.
for rooting follow this guide: http://forum.xda-developers.com/showthread.php?t=1818502
AND IMPORTANTLY, factory reset your phone after root or you might later complain battery don't last.
---------- Post added at 12:16 AM ---------- Previous post was at 12:15 AM ----------
Simply doing a factory reset will not remove root
I flashed something in German. It shows number 3 when shutting down and some apps with prefix 3 in German.
This is the most obvious way of telling I flashed something, isn't it ?
Flashed this provider:
http://www.drei.at
Did LG PC Suite do this when updating from v10a to v10f ?
L2Deliver said:
Flashing through the guide you are following and the one given by razerblade17 will REMOVE all root. So your device will be unroot as far as first boot is concerned.
for rooting follow this guide: http://forum.xda-developers.com/showthread.php?t=1818502
AND IMPORTANTLY, factory reset your phone after root or you might later complain battery don't last.
---------- Post added at 12:16 AM ---------- Previous post was at 12:15 AM ----------
Simply doing a factory reset will not remove root
Click to expand...
Click to collapse
Regarding battery life, I actually decided to flash from this reason:
http://forum.xda-developers.com/showthread.php?t=2013469
Does it have anything to do with things described in this thread ?
shiinkotheone said:
I flashed something in German. It shows number 3 when shutting down and some apps with prefix 3 in German.
This is the most obvious way of telling I flashed something, isn't it ?
Flashed this provider:
http://www.drei.at
Did LG PC Suite do this when updating from v10a to v10f ?
Click to expand...
Click to collapse
To check if you have flashed it's kinda complicated.. follow my steps closely
1. Check if your phone is able to boot into the lockscreen.
2. Pull down the notification drawer, press the Gear icon beside the Date
3. Scroll down to the bottom
4. Go into About Phone
5. Scroll to the bottom. Check the Software version states V10_ (whatever you've tried to flash)
If nothing out of what u expect is found then sorry you've just flashed your phone.
After I flashed that German ROM, everything was almost the same until I factory restored it, than I found out it was German and used one of links from site you guys provided. It's working fine now.
Thanks !
btw: What exactly did you mean by restoring after root ?
shiinkotheone said:
btw: What exactly did you mean by restoring after root ?
Click to expand...
Click to collapse
do a factory reset from either the settings or recovery (hold vol down + power while phone's off until u see the recovery. Use vol up and down to navigate and power button to select) after you obtained root. You can do the reset anytime after root but until then you might get shiity battery life.
Sent from my LG-P880 using xda app-developers app
---------- Post added at 02:25 AM ---------- Previous post was at 02:21 AM ----------
Again, factory resetting will NOT remove root.
Sent from my LG-P880 using xda app-developers app
unroot traces o4x
answered in private message
Hello everybody,
so I'm as new to this forum as I am to the android world. Just this Wednesday i bought a new LG Optimus 4X HD on amazon.de
Thought it would be nice to start of with Cyanogenmod.
So I started my search for some good "How-To's"...it were many I went through and I already invested many hours in getting this running. Sadly it still doesn't work. I actually wanted to stay with one How-To but at one point there's always a download not working so that other sources are needed.
So what did I do...
-I rooted it yes (at this point I needed to download "Rooting Toolkit for Optimus 4X HD" which wasn't downloadable so i switched to another How-To, btw. first How-To: http://androidlegend.com/android-4-2-1-via-cyanogenmod-10-1-for-lg-optimus-4x-hd-p880-cm10-1/
-Installed "LG 4X Recovery 1.2" and installed this way CWM.
-At another point here I installed ROM Manager, installed it and went into Recovery and here happend the first problem, kernel panic.
Said something like "couldn't load kernel/wrong kernel", kernel panics...Me panics too
Anyway, force kill -> auto reboot -> still kernel panic -> again -> batterie out and a few times with usb cable connected to PC -> Batterie again, works :good:
Ok so Clockworkmods Rom Manager seemed to be not that good... did recovery boot with LG 4X Recovery, tada works, I go into the folder with the Cyanogenmod-zip and want to start the ROM installation and it says Status 7 (of course I googled Status 7 and searched here in the xda-boards for it, nothing helpful found yet)
Installed older version of LG 4X Recovery (1.1), still same fault.
I uninstall the ROM manager, redownload and reinstall, try to backup -> Kernel panic.
I search for a different How-To, yet nothing good happened. Others go something similar and say "at booting press On-Button and Volume down-button at the same time", I do that -> Kernel panic
I have no idea whats wrong with the kernel...but normal booting works fine.
Next I read something about needing to unlock bootloader, have a workthrough aka this http://forum.xda-developers.com/showthread.php?t=2224020
After I enter "adb reboot oem-unlock" in DOS command window it should say something concerning "open bootloader", but not in my case, just a normal reboot happened (this is what it looks like at least). Checking the hidden menu also doesn't show anything as I don't have the option with the boot-loader status there.
Next trick, I go to LG Recovery again and first wipe the whole stuff and try then the Cyanogen istall, still doesn't work and as I wasn't able to backups before (tried Titanium but it froze at 12% and the stuff about ROM Manager is told^^) I now had a clean factory install, all my work before lost, nothing rooted and still a kernel which panics when I do the "safe-boot"(this volume- and on-button-thing).
I also tried 3-All-in-one solutions, neither of them worked. (2 german ones, and one english one)
So I think thats it, ah wrong, still not finished. I also tried to install a new kernel to erase that f****ng problem with the kernel panic. I choose to use WerwewolfJB_v005 http://forum.xda-developers.com/showthread.php?t=2256899
the easy and fast way made the same as the try before with the "open bootloader"-try, just normal restart. When I enter the second line in the command line, it just says "waiting for device".
So yeah, thats it. I don't know what else to do. Does anyone know what I could also do, or is this case unsolvable? Is the Smartphone broken or did I make a mistake at any point? What should I do?
I'd be super glad if anyone could help me here. I hope I described my case well enough. I hope I didn't forget anything.
Thanks in advance!
Greetz chrisus
I am also new to this stuff but maybe i could help you anyway
What is the Firmware Version of your phone?
(Sorry for bad english )
The old "adb reboot oem-unlock" didn't work for me on UK, v234-000 either. I followed this thread instead and it worked perfectly first time.
As long as your phone has been turned on and connected to the network for long enough on v20x you should be fine - once you get the notification from LG about your phone being registered or similar then you'll be fine, normally a couple of hours.
Just reflash your phone to stock, wait for the notification and try the two-step method from the above post and you should be fine.
root , recorery and unlock boot loader
you must have your bootloader unlocked in order to flash kernels
( this worked for me but I can't guarantee it will work for others you can only try !! be aware when messing with firmware and bootloader you warranty could be voided )
make sure your phone is rooted you know if it is rooted because you will have superuser installed in your apps ( grey square icon with green android head on it ). if not I used this method to root my phone so try this http://forum.xda-developers.com/showthread.php?t=2180688
if your phone is rooted next you will need a recovery this will help to backup your phone and create a restore point so in case any thing goes wrong. to install a recovery go to play store and download rom manager ( clockworkmod ) once installed open rom manger and select recovery setup. then select install or update recovery then select your phone ( lg optimus 4x hd). then select flash clockworkmod recovery. and then wait while it downloads and setup . hopefully when finished it will say succesfull. ( make sure phone is rooted or it wont work ) to check clockwork mod is working you can reboot into recovery through rom manager or power off phone then hold volume down key press power button to power up but keep holding volume down key until recovery boot up. ( be a wise option to backup phone now in recovery)
next to unlock bootloader ( so you can flash roms with kernels) go to this thread, http://forum.xda-developers.com/showthread.php?t=2224020
and download the BL_unlock_new .rar file when its download copy it to your desktop on pc and then extract it to desktop on pc . now make sure your phone is not connected to your computer go to phone settings,then go to development options, and then select usb debugging on. once debugging is on now connect your phone to pc wait for it to connect you can keep your phone on charging mode. now open the BL_unlocking_new extracted folder on desktop on pc and double click on the BL_unlock file a box should open up on your desktop asking you to tap a key to continue so press a key now your phone should reboot and some white writing will appear on screen .on your desktop the bottom line should say please... now tap a key on computer it should say press any key to continue < waiting for device> now disconnect phone from computer look on phone screen it should say now ready! now hold power button for 10 secs and let phone reboot. to test if bootloader is unlocked on phone go to dail pad and dail this 3845#*880# you should get the hidden menu on your screen scroll down to bootloader unlock check and select then select bootloader unlock check and hopefully it should say unlock...
now you have root , recovery and bootloader unlock, now you can download a rom for this phone copy rom ( should be a zip file ) to your phone then open rom manager on phone and reboot in to recovery or power off phone, hold volume down button then press power button should now boot into recovery then you want to use volume keys to scroll down and select wipe data/factory reset with power button then scroll down and select advanced then scroll down and select wipe dalvik cache then you want to select go back then select install zip from sd card then select where you saved your rom sd card or external sd card then select rom then select install...
hopefully if that's helped you or anybody else ...
Hursty uk said:
next to unlock bootloader ( so you can flash roms with kernels) go to this thread, http://forum.xda-developers.com/showthread.php?t=2224020
and download the BL_unlock_new .rar file
Click to expand...
Click to collapse
If the OP can possibly get his bootloader unlocked following the official method then he should, rather than using that file. Nobody really knows what all the 'fuses' that are blown by using that file do and that would certainly result in his warranty being voided in any country, whereas in a lot of countries his warranty won't actually be voided by using the official unlock method.
added warning
SimonTS said:
If the OP can possibly get his bootloader unlocked following the official method then he should, rather than using that file. Nobody really knows what all the 'fuses' that are blown by using that file do and that would certainly result in his warranty being voided in any country, whereas in a lot of countries his warranty won't actually be voided by using the official unlock method.
Click to expand...
Click to collapse
edited last post with a warning you could void warranty !!
Ok, thanks for the answers so far. But still, wasn't able to get any further.
@Dexxon: Firmware version is 4.0.3
Besides: Kernel Version is 2.6.39.4 and there's also something written like "[email protected] #1" in the hidden menu...is this normal? AP Bootloader Verison unknown and AP OS Version is 2.6.39.4 also this jinwoo...
@SimonTS: I tried to unlock the bootloader with your link and advices (which is the same as i tried before).
Got a message saying "Thanks for buying this LG Phone..blabla" and I guess thats what you mentantioned about that informing.
Battery was loaded to 100% so i connected it to PC, said "LG Software Mode Connection" on the phone (before I always took that "data exchange connection"), went to the adb folder and made a command window there, entered "adb reboot-bootloader", smartphone reboots, should stay in LG window screen, but it doesn't. It just boots totally normal into the home screen.
@Hursty uk: As I said in the first post. Everything regarding the ROM Manager from CWM sends my Phone into kernel panic. As this is quite hard to get a normal reboot again (even battery out for some time and back-in doesn't solve this) I really prefere to not use this option. As it is just frustrating and doesn't help.
And yes it is already rooted (I have SuperSU and I checked it with the "Root Checker"-App) Everything says it is rooted. I rooted it with that method: androidlegend.com/how-to-root-lg-optimus-4x-hd-o4x-p880
Ah I really don't know what else to do. Is something just wrong with my device?
btw I also can't do a software update with the LG Software from there website, so I could at least go 4.1 instead of 4.0.3 atm...
When I try it that way, and install the USB-Drvier for LG P880 the SW-Update button stays grey and is unclickable even though the phone is connected.
chrisus said:
Ok, thanks for the answers so far. But still, wasn't able to get any further.
@Dexxon: Firmware version is 4.0.3
Besides: Kernel Version is 2.6.39.4 and there's also something written like "[email protected] #1" in the hidden menu...is this normal? AP Bootloader Verison unknown and AP OS Version is 2.6.39.4 also this jinwoo...
@SimonTS: I tried to unlock the bootloader with your link and advices (which is the same as i tried before).
Got a message saying "Thanks for buying this LG Phone..blabla" and I guess thats what you mentantioned about that informing.
Battery was loaded to 100% so i connected it to PC, said "LG Software Mode Connection" on the phone (before I always took that "data exchange connection"), went to the adb folder and made a command window there, entered "adb reboot-bootloader", smartphone reboots, should stay in LG window screen, but it doesn't. It just boots totally normal into the home screen.
@Hursty uk: As I said in the first post. Everything regarding the ROM Manager from CWM sends my Phone into kernel panic. As this is quite hard to get a normal reboot again (even battery out for some time and back-in doesn't solve this) I really prefere to not use this option. As it is just frustrating and doesn't help.
And yes it is already rooted (I have SuperSU and I checked it with the "Root Checker"-App) Everything says it is rooted. I rooted it with that method: androidlegend.com/how-to-root-lg-optimus-4x-hd-o4x-p880
Ah I really don't know what else to do. Is something just wrong with my device?
btw I also can't do a software update with the LG Software from there website, so I could at least go 4.1 instead of 4.0.3 atm...
When I try it that way, and install the USB-Drvier for LG P880 the SW-Update button stays grey and is unclickable even though the phone is connected.
Click to expand...
Click to collapse
To unlock the bootloader following either of the official methods requires you to be running v20x (The LG Stock v4.1 code) first, so that is why the commands are doing nothing for you.
For the moment, forget about CWM, Root, Bootloaders etc - the key thing is to get your phone working again. Can you reinstall stock v10x software following the guide on this page?
SimonTS said:
To unlock the bootloader following either of the official methods requires you to be running v20x (The LG Stock v4.1 code) first, so that is why the commands are doing nothing for you.
For the moment, forget about CWM, Root, Bootloaders etc - the key thing is to get your phone working again. Can you reinstall stock v10x software following the guide on this page?
Click to expand...
Click to collapse
He might as well just flash JB with flashtool, saves him flashing ICS just to flash JB straight after
Sent from my rooted P880
SimonTS said:
To unlock the bootloader following either of the official methods requires you to be running v20x (The LG Stock v4.1 code) first, so that is why the commands are doing nothing for you.
For the moment, forget about CWM, Root, Bootloaders etc - the key thing is to get your phone working again. Can you reinstall stock v10x software following the guide on this page?
Click to expand...
Click to collapse
that would of been my next answer @SimonTS . A while back a flashed something on my phone and it got stuck at the lg bootup picture what I had to do was re-install original firmware ( through KDZ files) to get my phone working. I would try the link @SimonTS suggested .
@non4 said:
He might as well just flash JB with flashtool, saves him flashing ICS just to flash JB straight after
Click to expand...
Click to collapse
Indeed - sorry, having a slightly dense day and was more thinking about getting him back to the stage at which his phone was working correctly before.
SimonTS said:
To unlock the bootloader following either of the official methods requires you to be running v20x (The LG Stock v4.1 code) first, so that is why the commands are doing nothing for you.
For the moment, forget about CWM, Root, Bootloaders etc - the key thing is to get your phone working again. Can you reinstall stock v10x software following the guide on this page?
Click to expand...
Click to collapse
Thanks for that link, I tried it but that also didn't work (at least I guess so...)
I did everything like said at the link but at the last point the program (kdz_fw_upd.exe) crashes. Tried it 3 times, every time as administrator like mentioned in that forum post. I'm using Win 8 64bit btw...
Screenshot is in the attached .jpg. My system is japanese, but I think you can figure out what this kind of window means. It just says that the program isn't responding and needs to be shutdown.
I tried it like mentioned with putting the battery back in when the log starts and without putting it back in, in both cases the program crashes after a few seconds (~10 secs) when started.
Where do I actually see which V**x version is installed? If v10x or v20a? Surprisingly the LG Support Tool said I have v10H when the phone was still connected after the crash. And it offered me a SW-Update. But I haven't done that one yet, not sure if that would work correct...
@ chrisus
man, what is your phone status now?
in what situation you are actually?
gtdaniel said:
@ chrisus
man, what is your phone status now?
in what situation you are actually?
Click to expand...
Click to collapse
Freshly wiped so its factory reset, just rooted and LG 4X Recovery installed (for CWM touch). Nothing more.
Following Informations from Root Checker-App:
Product: x3_open_eu
Host: buildgb2
User: jinwoo.lee (wtf? i don't know what should be here at the point user, but that is clearly not me, is this factory set style?)
Additional Phone Informations from settings:
Android version: 4.0.3
Kernel version: 2.6.39.4
Build number: IML74K
Software version: LG-P880-V10h-NOV-19-2012 (ah now I see where that v10x-info is^^)
chrisus said:
Freshly wiped so its factory reset, just rooted and LG 4X Recovery installed (for CWM touch). Nothing more.
Following Informations from Root Checker-App:
Product: x3_open_eu
Host: buildgb2
User: jinwoo.lee (wtf? i don't know what should be here at the point user, but that is clearly not me, is this factory set style?)
Additional Phone Informations from settings:
Android version: 4.0.3
Kernel version: 2.6.39.4
Build number: IML74K
Software version: LG-P880-V10h-NOV-19-2012 (ah now I see where that v10x-info is^^)
Click to expand...
Click to collapse
cool!
i am glad you can bring the phone in working status again.
now you have to do to put cyanogen on your phone is:
1. install JB 4.1.2 update
2. root it again
3. install CWM Recovery again
4. unlock bootloader
for first step go to:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=
after <=> put your IMEI number
and download a v20a version compatible with your device
and apply update
if you are again in trouble post here...
and if you are else to do, please post here to not make to loose time...
gtdaniel said:
cool!
i am glad you can bring the phone in working status again.
now you have to do to put cyanogen on your phone is:
1. install JB 4.1.2 update
2. root it again
3. install CWM Recovery again
4. unlock bootloader
for first step go to:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=
after <=> put your IMEI number
and download a v20a version compatible with your device
and apply update
if you are again in trouble post here...
and if you are else to do, please post here to not make to loose time...
Click to expand...
Click to collapse
+1 this. Also, there have been many problems with running these apps using Windows 8, and you need to make sure you're not using a USB 3 port as they being other problems in to the equation.
gtdaniel said:
cool!
i am glad you can bring the phone in working status again.
now you have to do to put cyanogen on your phone is:
1. install JB 4.1.2 update
2. root it again
3. install CWM Recovery again
4. unlock bootloader
for first step go to:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=
after <=> put your IMEI number
and download a v20a version compatible with your device
and apply update
if you are again in trouble post here...
and if you are else to do, please post here to not make to loose time...
Click to expand...
Click to collapse
Ok so I've flashed JB with the LG Updater (without batterie and volume down button pressed connecting to PC, than start the update -> meanwhile putting batterie back in)
JB worked just fine and I also don't had the problem with the kernel panic when booting with volume down and power button.
So I thought, everything fresh and also different, I might give the ROM Manager App again a try (after I rooted it that way: http://forum.xda-developers.com/showthread.php?t=2180688 )...well, wasn't that smart. After I installed the Recovery for P880 in the ROM Manager, i made a normal boot (just for sure), back in the app, i wanted to go into Recovery mode and again kernel panic, bit different this time cause it does a shutdown after 5 seconds^^
Anyway, this way it didn't work, from now on I also couldn't go into safe mode anymore, same kernel panic.
As this kind of recovery doesn't seem to work, I tried the "old" way with the "LG 4X Recovery" I mentioned before. After recovery installation i just wanted to boot normal aaaand nothing happened. It stayed in the LG screen. Restart and anything didn't help here so I backed back to v10H with previous methods. Now I just got a security error saying "morning call is empty", no idea what that means but I just did the same method for JB again.
Worked afterwards, so I wanted to try it without ROM Manager Recovery installed and just LG 4X Recovery, (after rooted again of course) and it didn't boot again. Same game again.
So now I have JB installed, I'm going to root it now again, but I don't know what way I should go for doing the Recovery Part. I'm stuck on point 3 here
Any advices? btw thanks a lot until here, at least I made it half-way-through to JB now. Worst case I'd stay with that one at least.
I'm not entirely sure which threads you've been reading. Once you have the stock v20x ROM on your phone, just leave it alone for a few hours and make sure it is fully charged
After that, try to unlock the bootloader before doing anything else. If that works then you can worry about CWM and custom ROMs.
chrisus said:
Ok so I've flashed JB with the LG Updater (without batterie and volume down button pressed connecting to PC, than start the update -> meanwhile putting batterie back in)
JB worked just fine and I also don't had the problem with the kernel panic when booting with volume down and power button.
So I thought, everything fresh and also different, I might give the ROM Manager App again a try (after I rooted it that way: http://forum.xda-developers.com/showthread.php?t=2180688 )...well, wasn't that smart. After I installed the Recovery for P880 in the ROM Manager, i made a normal boot (just for sure), back in the app, i wanted to go into Recovery mode and again kernel panic, bit different this time cause it does a shutdown after 5 seconds^^
Anyway, this way it didn't work, from now on I also couldn't go into safe mode anymore, same kernel panic.
As this kind of recovery doesn't seem to work, I tried the "old" way with the "LG 4X Recovery" I mentioned before. After recovery installation i just wanted to boot normal aaaand nothing happened. It stayed in the LG screen. Restart and anything didn't help here so I backed back to v10H with previous methods. Now I just got a security error saying "morning call is empty", no idea what that means but I just did the same method for JB again.
Worked afterwards, so I wanted to try it without ROM Manager Recovery installed and just LG 4X Recovery, (after rooted again of course) and it didn't boot again. Same game again.
So now I have JB installed, I'm going to root it now again, but I don't know what way I should go for doing the Recovery Part. I'm stuck on point 3 here
Any advices? btw thanks a lot until here, at least I made it half-way-through to JB now. Worst case I'd stay with that one at least.
Click to expand...
Click to collapse
ok.
now i suppose you have a functional rooted JB 4.1.2 device.
from that you have to going on to rest of the steps to have CM installed on your device.so if it is not that (functional rooted JB device) is need to flash again JB and rooted again.
if you have the proper kdz file the tutorial for flasing is there: http://forum.xda-developers.com/showthread.php?t=2069723
and the tutorial for rooting device is there: http://forum.xda-developers.com/showthread.php?t=2180688&highlight=root+jb+4+1+2+
after that make some reboot of device to verify that:
1. the device boot to system normaly a few times (just let the device boot itself)
2. the device enter in S/W Upgrade Mode (with the device off, put the USB cable in device and PC or in device and AC adapter and press VOL DOWN + POWER) a few times
3. the device boot in Stock Recovery (with the device off, press VOL DOWN + POWER) a few time.
if you can manage to do this tree steps a few times normaly then you have a fully functional device and we go to next step that is Custom Recovery
the chance to make this steps without errors is more big if you start from scratch meaning fully wipe the device and flashing stock LG software on the device.
so, let as know here when you are ready...
gtdaniel said:
ok.
now i suppose you have a functional rooted JB 4.1.2 device.
from that you have to going on to rest of the steps to have CM installed on your device.so if it is not that (functional rooted JB device) is need to flash again JB and rooted again.
if you have the proper kdz file the tutorial for flasing is there: http://forum.xda-developers.com/showthread.php?t=2069723
and the tutorial for rooting device is there: http://forum.xda-developers.com/showthread.php?t=2180688&highlight=root+jb+4+1+2+
after that make some reboot of device to verify that:
1. the device boot to system normaly a few times (just let the device boot itself)
2. the device enter in S/W Upgrade Mode (with the device off, put the USB cable in device and PC or in device and AC adapter and press VOL DOWN + POWER) a few times
3. the device boot in Stock Recovery (with the device off, press VOL DOWN + POWER) a few time.
if you can manage to do this tree steps a few times normaly then you have a fully functional device and we go to next step that is Custom Recovery
the chance to make this steps without errors is more big if you start from scratch meaning fully wipe the device and flashing stock LG software on the device.
so, let as know here when you are ready...
Click to expand...
Click to collapse
he should unlock bootloader before flashing custom recovery.
so, dont use rom manager before you unlock bootloader, that's why you get kernel panics.
I can't charge my "s advance" while it off when i do that my phone automatically turn on and if the charger already plug in and i turn my phone off it's restart !!
now my phone fully discharge and i can't turn it on to charge it, and when i plug in charger no thing happen just Vibration
Notice
I try to reset factory twice before i still have this problem
please help
try reflash stock firmware using odin . and then enter recovery to factory reset the phone..
Thats nonsense. If he flash by Odin stock FW, no need to do factory reset or wipe something.
Powered by CM10.1
R_a_z_v_a_n said:
Thats nonsense. If he flash by Odin stock FW, no need to do factory reset or wipe something.
Powered by CM10.1
Click to expand...
Click to collapse
well its nothing to loose if try it..
lawong said:
try reflash stock firmware using odin . and then enter recovery to factory reset the phone..
Click to expand...
Click to collapse
I tried to flash stock firmware 2.3.6 and 4.1.2
Using odin.. and the problem still here :/
HaNy_N said:
I tried to flash stock firmware 2.3.6 and 4.1.2
Using odin.. and the problem still here :/
Click to expand...
Click to collapse
change ur charger unit, imo output voltage is too low
Ertocell said:
change ur charger unit, imo output voltage is too low
Click to expand...
Click to collapse
But I already use the original charger which came with the mobile
or you mean that the charger has damaged ?!
HaNy_N said:
But I already use the original charger which came with the mobile
or you mean that the charger has damaged ?!
Click to expand...
Click to collapse
Yes, try another one to see if problem is in charger. Try charging with USB on PC for example.
Sent from my GT-I9070 using Tapatalk now Free
leave the phone connectet to the charger... overnight?
reset battery data, remove it...
(ever on stock JB phone is propably always on while charging)
Sent from my GT-P1000 using Tapatalk 4
i think it's phone usb port or battery that's failure.. coz its like nothing wrong with the software and charger, when charger got some problems there's no respon at all if plugged it in to a phone..
Sent from my GT-N7000 using XDA Premium 4 mobile app
HaNy_N said:
I can't charge my "s advance" while it off when i do that my phone automatically turn on and if the charger already plug in and i turn my phone off it's restart !!
now my phone fully discharge and i can't turn it on to charge it, and when i plug in charger no thing happen just Vibration
Notice
I try to reset factory twice before i still have this problem
please help
Click to expand...
Click to collapse
I had the same problem! First root your device. And then use a custom rom such as this one
Steps to Install Android 4.2.2 on Samsung Galaxy S Advance GT-I9070 via Unofficial AOKP
Step-1: Download AOKP Android 4.2.2 for Samsung Galaxy S Advance to computer
Step-2: Download Google Apps
Step-3: Connect Galaxy phone to computer using USB cable. Copy downloaded zip files to SD card of phone. Do not extract any file
Step-4: Disconnect phone from computer and switch it off. Wait five to six seconds for vibration to confirm complete power off
Step-5: Boot Galaxy S Advance into recovery mode by pressing and holding Volume Up, Home and Power until Samsung logo appears. Then release all three buttons. The device will be in recovery mode soon
Note: In recovery mode, use Volume buttons to navigate between options and Power button to select desired option
Step-6: In recovery mode it is important to perform a Nandroid backup of existing ROM, which can be restored later in case the new ROM does not work or users wish to go back to previous firmware. To perform Nandroid backup, select Backup and Restore and then, on the next screen, select Backup again. When backup is done, go back to main recovery menu
Step-7: Perform data wiping task to avoid clash between new and previous ROM. Select wipe data/ factory reset, then select Yes on next screen to confirm action. Wait for a few minutes until data wiping process is completed and then go back to CWM recovery menu. Select wipe cache partition and select Wipe Dalvik Cache under Advance option to perform Dalvik cache wiping. Once action is completed, return to recovery menu
Step-8: Select install zip from sdcard and then select choose zip from sdcard. Now navigate to AOKP ROM zip earlier copied to SD card of phone. Press Power to select and confirm installation by selecting Yes on next screen. ROM installation should begin
Step-9: After ROM is installed, follow similar procedure (Step-8) but this time choose Google Apps package
Step-10: When installation process is completed, go back to main recovery menu and reboot phone by selecting reboot system now. The device will reboot into customised AOKP firmware. The phone will take a few minutes to boot up for the first time
The Samsung Galaxy S Advance should be now updated to Android 4.2.2 Jelly Bean, with unofficial AOKP ROM. Head to Settings > About Device to verify new software running on phone
Note: To go back to previous ROM, boot phone into recovery, select Backup and Restore and then restore ROM by selecting from list
All instructions are there in the site. Also this is a new Android OS version . It removes the bloatwares and significantly improves performance and will hopefully solve your "CHARGING BUG" and improve the user interface as well!BUT BE CAREFUL , THIS IS NOT A TOUCHWIZ ROM ! ITS AN AOKP ROM, so you'll lose TOUCHWIZ features.
If I did help ,please don't forget to click on the THANKS button !!!
Cheers !!
Hi all,
I'm having an odd issue. No matter whether I used Odin or Smart Switch I can simply not flash a stock firmware. Regardless of the method, the following always happens.
Downloads firmware to device
Reboots
Shows Android dude with "Installing update"
Stops half way through
Shows Android dude with "Erasing"
Disappears after few seconds
Reboots
Nothing is changed. Same as before the whole process...
liangle01 said:
Hi all,
I'm having an odd issue. No matter whether I used Odin or Smart Switch I can simply not flash a stock firmware. Regardless of the method, the following always happens.
Downloads firmware to device
Reboots
Shows Android dude with "Installing update"
Stops half way through
Shows Android dude with "Erasing"
Disappears after few seconds
Reboots
Nothing is changed. Same as before the whole process...
Click to expand...
Click to collapse
Make sure you uncheck auto reboot in Odin! Do not allow it to reboot the phone! Flash the stock firmware again and after it says success unplug the phone and immediately press and hold the volume down button and power button at the same time and when the screen comes back on select factory reset and after its finished the phone will reboot on it's own and you're done it should work correctly.
MrMike2182 said:
Make sure you uncheck auto reboot in Odin! Do not allow it to reboot the phone! Flash the stock firmware again and after it says success unplug the phone and immediately press and hold the volume down button and power button at the same time and when the screen comes back on select factory reset and after its finished the phone will reboot on it's own and you're done it should work correctly.
Click to expand...
Click to collapse
I am having a similar problem odin runs and passes, but the phone goes to the Samsung screen and has recovery is not seandroid enforcing on the top of the screen. Any ideas?
timsmooth said:
I am having a similar problem odin runs and passes, but the phone goes to the Samsung screen and has recovery is not seandroid enforcing on the top of the screen. Any ideas?
Click to expand...
Click to collapse
That's because you are trying to to root it I'm guessing? You either flashed the wrong kernel, or you actually did not turn on oem unlock in developer options. You'll need to restore it back to stock and then turn on oem unlock then flash a kernel/recovery and then retry what you're trying to do.
MrMike2182 said:
That's because you are trying to to root it I'm guessing? You either flashed the wrong kernel, or you actually did not turn on oem unlock in developer options. You'll need to restore it back to stock and then turn on oem unlock then flash a kernel/recovery and then retry what you're trying to do.
Click to expand...
Click to collapse
Fair enough. Where can I get the stock Kernel so I can get back into the OS? I keep finding bad ones with unmatching MD5s.
timsmooth said:
Fair enough. Where can I get the stock Kernel so I can get back into the OS? I keep finding bad ones with unmatching MD5s.
Click to expand...
Click to collapse
Download one of these for your phone. .
http://www.sammobile.com/firmwares/database/SM-N920P/
Make sure you uncheck auto reboot in Odin and as soon as it's done and says success disconnect the phone and immediately press and hold the volume down button and the power button at the same time and when the screen comes back up you HAVE to select factory reset wipe if you don't you'll be stuck again just let the little android dude install the update and then the phone will reboot and you'll be ok.
Unzip the md5 you get from the sammobile site and flash only the .tar
same thing
The same old firmware after rebooting.....Any ideas
liangle01 said:
The same old firmware after rebooting.....Any ideas
Click to expand...
Click to collapse
What do you mean the same old firmware? That firmware is just stock firmware so you can at least get back up and running to try rooting it again.
You asked for the stock firmware...
"I'm having an odd issue. No matter whether I used Odin or Smart Switch I can simply not flash a stock firmware. Regardless of the method, the following always happens.'
So I gave it to you.
MrMike2182 said:
Download one of these for your phone. .
http://www.sammobile.com/firmwares/database/SM-N920P/
Make sure you uncheck auto reboot in Odin and as soon as it's done and says success disconnect the phone and immediately press and hold the volume down button and the power button at the same time and when the screen comes back up you HAVE to select factory reset wipe if you don't you'll be stuck again just let the little android dude install the update and then the phone will reboot and you'll be ok.
Unzip the md5 you get from the sammobile site and flash only the .tar
Click to expand...
Click to collapse
LOL its been a long time since I have flashed or rooted, but I didn't know you can extract from an MD5, but I will do that and give it a shot. Ill let you know thx for your help.
MrMike2182 said:
Make sure you uncheck auto reboot in Odin! Do not allow it to reboot the phone! Flash the stock firmware again and after it says success unplug the phone and immediately press and hold the volume down button and power button at the same time and when the screen comes back on select factory reset and after its finished the phone will reboot on it's own and you're done it should work correctly.
Click to expand...
Click to collapse
My phone is not rooted (i like to keep it like that) all what I want is to change the CSC ( both of them are for the same country) but Odin keep failing. Any ideas plz
timsmooth said:
LOL its been a long time since I have flashed or rooted, but I didn't know you can extract from an MD5, but I will do that and give it a shot. Ill let you know thx for your help.
Click to expand...
Click to collapse
LOL it's better to extract the .tar from the md5 so it doesn't have to be verified which is what's causing it to not work for you.
---------- Post added at 08:42 AM ---------- Previous post was at 08:40 AM ----------
liangle01 said:
My phone is not rooted (i like to keep it like that) all what I want is to change the CSC ( both of them are for the same country) but Odin keep failing. Any ideas plz
Click to expand...
Click to collapse
If Odin fails there's nothing I can do about it sorry.
MrMike2182 said:
Download one of these for your phone. .
http://www.sammobile.com/firmwares/database/SM-N920P/
Make sure you uncheck auto reboot in Odin and as soon as it's done and says success disconnect the phone and immediately press and hold the volume down button and the power button at the same time and when the screen comes back up you HAVE to select factory reset wipe if you don't you'll be stuck again just let the little android dude install the update and then the phone will reboot and you'll be ok.
Unzip the md5 you get from the sammobile site and flash only the .tar
Click to expand...
Click to collapse
Dag nabit I lost ALL my data. Jesus H xrst. Lucky I use cloud back up for my pictures. At least I have those. All my music is gone though. Dude thanks a million though at least I am up and running again. The process was simple enough but I would have never figured it out. Ive got a long day ahead of me now. I have to re configure my phone. Anyway, I owe you a beer.
Flashing phones never used to be this brutal. What happened?
MrMike2182 said:
What do you mean the same old firmware? That firmware is just stock firmware so you can at least get back up and running to try rooting it again.
You asked for the stock firmware...
"I'm having an odd issue. No matter whether I used Odin or Smart Switch I can simply not flash a stock firmware. Regardless of the method, the following always happens.'
So I gave it to you.
Click to expand...
Click to collapse
the new firmware (6.0.1) has a different CSC from the original (6.0.1). but when i flash it with odin nothing happened:1- my Apps,my photos....all is there.2- when i check the CSC it's the same old one..i mean it have to change isn't ???? . it's just like i have restarted my phone normal !!!!!
MrMike2182 said:
LOL it's better to extract the .tar from the md5 so it doesn't have to be verified which is what's causing it to not work for you.
---------- Post added at 08:42 AM ---------- Previous post was at 08:40 AM ----------
If Odin fails there's nothing I can do about it sorry.
Click to expand...
Click to collapse
thanks for responding anyway. if you find anything please report me......
again thank you ✌✌✌
timsmooth said:
Dag nabit I lost ALL my data. Jesus H xrst. Lucky I use cloud back up for my pictures. At least I have those. All my music is gone though. Dude thanks a million though at least I am up and running again. The process was simple enough but I would have never figured it out. Ive got a long day ahead of me now. I have to re configure my phone. Anyway, I owe you a beer.
Flashing phones never used to be this brutal. What happened?
Click to expand...
Click to collapse
Shoot sorry I should have mentioned that it was going to erase everything (I found out the hard way to lol) But even if I had known that I wouldn't have been able to get them back anyway once you can't get in to change the settings to file transfer.. I'm glad I back everything up to my laptop! The phone companies are locking the phones down tightly "for our own interests they say" which is BS and totally goes against what Android open source is supposed to be about!!!
---------- Post added at 10:25 AM ---------- Previous post was at 10:23 AM ----------
liangle01 said:
the new firmware (6.0.1) has a different CSC from the original (6.0.1). but when i flash it with odin nothing happened:1- my Apps,my photos....all is there.2- when i check the CSC it's the same old one..i mean it have to change isn't ???? . it's just like i have restarted my phone normal !!!!!
Click to expand...
Click to collapse
What's wrong with your phone booting normal? I don't understand what you're trying to do.. What's the CSC have to do with anything?