A friend flashed my x8 to kernel nAa-14 and rom MiniCM7-2.2.1, but I want to recover my phone to original state.
Can someone, please tell me the right procedure to do so. I have CWM recovery installed and a backup of original settings.
Do I need to flash stock kernel first? Where can I find it?
Or is it possible to simply flash the stock rom?
Thank You.
masval47
masval47 said:
A friend flashed my x8 to kernel nAa-14 and rom MiniCM7-2.2.1, but I want to recover my phone to original state.
Can someone, please tell me the right procedure to do so. I have CWM recovery installed and a backup of original settings.
Do I need to flash stock kernel first? Where can I find it?
Or is it possible to simply flash the stock rom?
Thank You.
masval47
Click to expand...
Click to collapse
just repair phone wit h PCC and you will have android 2.1
lolwut?!
why do you want to go back to 1.6?
use pccompanion and you will go to 2.1,if you want 1.6 that bad,find it and flash it with flashtool(flash stock kernel too)
stamatis16 said:
lolwut?!
why do you want to go back to 1.6?
use pccompanion and you will go to 2.1,if you want 1.6 that bad,find it and flash it with flashtool(flash stock kernel too)
Click to expand...
Click to collapse
Sorry, I meant 2.1.
I just want be sure. Can it be done with PCCompanion even if I have custom kernel and unlocked bootloader? Is there any risk of ending up with a bricked phone?
I searched the forum and some members argued in their posts that you can't use PCCompanion to repair phone if you have unlocked bootloader.
If this is true, can I flash stock kernel and what's the procedure to do so?
Where can i download stock kernel?
masval47 said:
Sorry, I meant 2.1.
I just want be sure. Can it be done with PCCompanion even if I have custom kernel and unlocked bootloader? Is there any risk of ending up with a bricked phone?
Click to expand...
Click to collapse
no its safe just repair phone with PCC
fotak-x said:
no its safe just repair phone with PCC
Click to expand...
Click to collapse
Thanks
repairing with pccompanion will replace the kernel to the stock one and the bootloader will remain unlocked..nothing to argue about...
stamatis16 said:
repairing with pccompanion will replace the kernel to the stock one and the bootloader will remain unlocked..nothing to argue about...
Click to expand...
Click to collapse
I'm unable to connect to PCC. It is unable to detect my device.
But I can access my memory card via Windows Explorer
restart your computer and try again,the drivers should install by themselves,if that dont help you need to install drivers
stamatis16 said:
restart your computer and try again,the drivers should install by themselves,if that dont help you need to install drivers
Click to expand...
Click to collapse
Instructions in PCC:
1. Drag the status bar downwards
2.Tap USB connected
3.Tap Mount
4.PCC will connect to the phone
But, the problem is that that when I tap USB connected i don't have an option Mount on my phone, just USB storage (this is not correct translation, my phone language is croatian)
Problem solved!
I used Flashtool and X8_E15_2.1.1.C.0.0_generic.ftf
ok,good:good:
next time post your question at Q&A and not in general
Of coure the pcc doesn't detects your phone, you need the stock kernel for that, but i'm glad you find a 2.1 and solved the problem as you said.
Sent from my X8 using xda app-developers app
Related
interesting. i found this manual on SE web site. unlocking bootloader
http://unlockbootloader.sonyericsson.com/instructions
anyone tried it?
thanks
Its for 2011 SE Xperia devices ( Arc, Play, Neo etc.).
Sent from my X8 using XDA App
well x8 is also xperia and i buy it this year (E15i stock)
You can use latest flashtool 0.51 for unlocking X8 bootloader.Just click unlock button in plugin menu. I have unlocked my w8 by manually selecting device as E15 (x8).You have to be on stock ROM for this to work.
Although I can flash custom kernels ,all stuck after displaying Logo.Inbuilt recovery is working.At last i have to re flash stock kernel . I think some modification required for X8 custom kernel for use in w8. Any one succeded in custom kernel in w8?
aji_s said:
You can use latest flashtool 0.51 for unlocking X8 bootloader.Just click unlock button in plugin menu. I have unlocked my w8 by manually selecting device as E15 (x8).You have to be on stock ROM for this to work.
Although I can flash custom kernels ,all stuck after displaying Logo.Inbuilt recovery is working.At last i have to re flash stock kernel . I think some modification required for X8 custom kernel for use in w8. Any one succeded in custom kernel in w8?
Click to expand...
Click to collapse
ok so i need to perform restore from stock rom backup folder and tried to unlock. ok.
another think... when i update flash tool to 0.5.1... options in unlock menu is gone and yes i have to manualy select device with or withou update of flash tool. i will post results later when got home.
and another thing are there issues if i run flashtool on 64bit W7 or32bit W7? until now i got 2 different log uotputs.... anyway i think on 32 bit W7 flashtool make some more than on 64 bit W7
gferen said:
well x8 is also xperia and i buy it this year (E15i stock)
Click to expand...
Click to collapse
You can buy it in 2016 but its still 2010 phone ( the year when its manufactured).
Sent from my X8 using XDA App
I unlock bootloader on GDX v19 without any problem to match with linux kernel..
then a few days I notice my phone no network anymore..
then I go back to stock kernel with flashin tool (instead SEUS), I got a same thing..( but when in stock rom I got "please insert sim card")..
I tried with SEUS ="your phone updated"...
finally I sent to the company who provide the warranty..
and yesterday I just found a thread how to solve "no network problem" in Q&A..
huhu..
OK so quick review
if i want to unlock boolloader:
-flash tool 0.5.0.... and drivers
-stock rom installed
-later install again custom rom
or did i miss something?
p.s. where to find stock rom? accidently i deleted my first backup from PC.
so stock rom is like custom roms in ZIP files and using xrecovery to put them back on ot some TFT file i read about.
thanks
dangerous
people have unlocked their bootloaders for x8 before but now it is very dangerous. if it goes wrong it can= full brick which = you need to send it off to sony ericsson to have it fixed. full brick is impossible to crack. if you have a different brick then you could possibly unbrick it. only unlock your bootloader if you alright if you phone screws up. but a good side on unlocking the bootloader is that we can flash custom kernels install new drivers ( i think we can do that when our phones rooted anyway. my phone is rooted and running gingerdx and i have installed cypress multitouch)
etc... if you plan on doing that then good luck and may the force be with you
-wilbso
---------- Post added at 04:28 PM ---------- Previous post was at 04:23 PM ----------
gferen said:
well x8 is also xperia and i buy it this year (E15i stock)
Click to expand...
Click to collapse
no the web page you have just supports the latest phones not our x8. thre is a thread here with how to unlock and lock bootloader
gferen said:
OK so quick review
if i want to unlock boolloader:
-flash tool 0.5.0.... and drivers
-stock rom installed
-later install again custom rom
or did i miss something?
p.s. where to find stock rom? accidently i deleted my first backup from PC.
so stock rom is like custom roms in ZIP files and using xrecovery to put them back on ot some TFT file i read about.
thanks
Click to expand...
Click to collapse
PC companion ( edit: seus not available anymore so we us PC companion
Currently using RDX rom with nAn kernel. I want to go back to complete stock. Everything stock. How can I do it? When I connect my phone to my PC. SEUS detects my phone as x10?? Should I repair using it? Please help. Need to do it urgently....!!! I am using a SE W8. Not X8. I want my phone as it was
Flash stock kernel and then repair with seus......
virajt said:
Currently using RDX rom with nAn kernel. I want to go back to complete stock. Everything stock. How can I do it? When I connect my phone to my PC. SEUS detects my phone as x10?? Should I repair using it? Please help. Need to do it urgently....!!! I am using a SE W8. Not X8. I want my phone as it was
Click to expand...
Click to collapse
use pcc dont wory about hi say you hawe x10 hi will say you hawe newest wersion but you may repair yours program just do this you dont need flash stock kernel first pcc will bring you back ful stock rom and kernel
And you should lock your bootloader.
When I bricked my phone and installed stock kernel&rom, bootloader was still unlocked
But PCC is showing that I have X10. Wont I get error to on my phone? I have w8!
virajt said:
But PCC is showing that I have X10. Wont I get error to on my phone? I have w8!
Click to expand...
Click to collapse
Probably you will as it will try to install the wrong ROM and if it does u will brick ur phone. Ok so first you connect your phone without connecting your memory card. Go to PCC and click repair, and just skip the dialog boxes and then it will ask you for ur phone model, selct w8 and then follow the instructions...
"There is no software available for your phone yet. Please try again later"
try wotan
http://www.wotanserver.com/en
try again i was repair my x8 whit pcc and hi tels me to that i hawe x10 but after repair all was corect and i hawe x8 stock software again
Done! With the help of this thread!!
Just one problem. I have x8's stock installed. How can I get w8's stock?? There is just a little difference.. But still!
virajt said:
Just one problem. I have x8's stock installed. How can I get w8's stock?? There is just a little difference.. But still!
Click to expand...
Click to collapse
You found the post I wrote about how to recover soft-bricks through Flashtool but you didn't find the W8 Stock ROM post on XDA?
Well, here it is ...
[ROM] Xperia™ W8 Stock ROM [17/05/2011]
Courtesy of Haka
Direct Link to the W8 Original Stock ROM Download (2.1.1.A.0.46)
The RAR seems to be a xRecovery backup. So simply extract the file and copy it onto your SD card under /sdcard/xrecovery/backup/W8.Bld46.17.05.2011
If you want it as a Flashtool FTF for future recovery purposes I'm afraid you have to create it yourself. Simply restore the backup through xRecovery and once that's done don't boot the device but connect it in Flash Mode to Flashtool and create a backup of the ROM. Feel free create a ZIP and put it up on Multiupload, or whatever File Hosting site, to share it with other W8 users (you know, a FTF would enable easy "soft brick" recovery through Flashtool in case none of the recoveries work anymore).
B.Jay said:
You found the post I wrote about how to recover soft-bricks through Flashtool but you didn't find the W8 Stock ROM post on XDA?
Well, here it is ...
[ROM] Xperia™ W8 Stock ROM [17/05/2011]
Courtesy of Haka
Direct Link to the W8 Original Stock ROM Download (2.1.1.A.0.46)
The RAR seems to be a xRecovery backup. So simply extract the file and copy it onto your SD card under /sdcard/xrecovery/backup/W8.Bld46.17.05.2011
If you want it as a Flashtool FTF for future recovery purposes I'm afraid you have to create it yourself. Simply restore the backup through xRecovery and once that's done don't boot the device but connect it in Flash Mode to Flashtool and create a backup of the ROM. Feel free create a ZIP and put it up on Multiupload, or whatever File Hosting site, to share it with other W8 users (you know, a FTF would enable easy "soft brick" recovery through Flashtool in case none of the recoveries work anymore).
Click to expand...
Click to collapse
I wanted this. Found it over XDA. Search Tool. I mostly forget to use it. Lets see how it is. In download process now!
"There is no software available for your phone yet. Please try again later". I tried today and I still am getting this error!
Guys i have a big problem. Every time i turn of my phone or try to put it on download mode or recovery mode it stucks in black screen and dont responding like it's been bricked. But when i remove the battery for 2 min and place it again it's opening normaly. Im in stock filmware and just rooted. Can u tell me why this is happening? Maybe i have to flash the official filmware again or somethink?
bagelismar said:
Guys i have a big problem. Every time i turn of my phone or try to put it on download mode or recovery mode it stucks in black screen and dont responding like it's been bricked. But when i remove the battery for 2 min and place it again it's opening normaly. Im in stock filmware and just rooted. Can u tell me why this is happening? Maybe i have to flash the official filmware again or somethink?
Click to expand...
Click to collapse
Are you on stock kernel? If so then flash some safe kernel and try full wipe, if that too doesn't help, then flash stock firmware using pc odin.
I am assuming you are on ICS, as you didn't provide any info. You should have mentioned the method used for root and everything.
jeetu1981 said:
Are you on stock kernel? If so then flash some safe kernel and try full wipe, if that too doesn't help, then flash stock firmware using pc odin.
I am assuming you are on ICS, as you didn't provide any info. You should have mentioned the method used for root and everything.
Click to expand...
Click to collapse
Sorry man your right. I used cursed4eva way that i found on a youtube video and im in ICS your right. All my broblems start when i wanted to flash a custom rom and with android recovery i tried to install AbyssNotekerne.zip from my external sd. Since i couldn't cause i was getting some kind of error i think somethink about licence i stop cause i didnt want to brick my phone and after this all problems began. So any help is welcome thank you
bagelismar said:
Sorry man your right. I used cursed4eva way that i found on a youtube video and im in ICS your right. All my broblems start when i wanted to flash a custom rom and with android recovery i tried to install AbyssNotekerne.zip from my external sd. Since i couldn't cause i was getting some kind of error i think somethink about licence i stop cause i didnt want to brick my phone and after this all problems began. So any help is welcome thank you
Click to expand...
Click to collapse
Now i cant even get to download mode to use odin to flash GB rom. I tried flashing abyss kernel using srock ICS recovery and that's the main reason for current situation i think. Any help?
bagelismar said:
Now i cant even get to download mode to use odin to flash GB rom. I tried flashing abyss kernel using srock ICS recovery and that's the main reason for current situation i think. Any help?
Click to expand...
Click to collapse
Take it to a samsung service center and ask them to reset the phone. Tell them its too slow after the latest update using kies. If there is a problem with the motherboard they will report back and replace under warranty.
Else they will install the OS completely new and you can start from scratch to root and install other custom roms.
Try using USB jig to go to download mode, try it first. Jig is not expensive.
Sent from my U1 using xda premium
heavenhated said:
Take it to a samsung service center and ask them to reset the phone. Tell them its too slow after the latest update using kies. If there is a problem with the motherboard they will report back and replace under warranty.
Else they will install the OS completely new and you can start from scratch to root and install other custom roms.
Click to expand...
Click to collapse
Will my warranty be still active cause my phone is rooted...? Somehow my phone start up this morning but im afraid trying to flash somethink like GB official with odin or somethink like that cause i dont know if it will open again That means that my phone isn't bricked yet cause it's open now? Thanks a lot for help
jonpaslim said:
Try using USB jig to go to download mode, try it first. Jig is not expensive.
Sent from my U1 using xda premium
Click to expand...
Click to collapse
because he tries the jig before it cost anything
bagelismar said:
Will my warranty be still active cause my phone is rooted...? Somehow my phone start up this morning but im afraid trying to flash somethink like GB official with odin or somethink like that cause i dont know if it will open again That means that my phone isn't bricked yet cause it's open now? Thanks a lot for help
Click to expand...
Click to collapse
No it's not bricked. Yes you lose your warranty, but you can unroot your Note. Don't warry Note is so good phone, that you don't need warranty
notko said:
No it's not bricked. Yes you lose your warranty, but you can unroot your Note. Don't warry Note is so good phone, that you don't need warranty
Click to expand...
Click to collapse
Then if it's not bricked why i need to remove the battery for 1 hour and wait an other 2 hours to finally open my phone after a simple turn off? Thats why i want the warranty so i can take the phone to samsung and fix this issue. And im afraid to unroot it cause when ever i try to put my phone on recovery mode its stucks and take for ever to open againm\
hello.. my xperia x8 was originally subscriber locked and was unlocked by a technician (i ddnt know how and what he did) while being retained on stock and unrooted.
now the question is, will the unlock remain once i flash a custom rom such as ginger dx?
if not, how can i disable the subscriber lock?
thanks in advance for your replies..
Not at all....your bootloder remains unlocked always if it is done properly.
Sent from my E15i using xda app-developers app
thank you for replying.. i hav more questns tho..
youre saying that the subscriber lock is with the bootloader?
would you consider using x8 toolbox in rooting the phone as proper?
silenth2o said:
thank you for replying.. i hav more questns tho..
youre saying that the subscriber lock is with the bootloader?
would you consider using x8 toolbox in rooting the phone as proper?
Click to expand...
Click to collapse
Yes....you probably have unlocked bootloader.....would you minfd to look under the battery for a date number?
turn off phone
take out battery
look at the BACK SIDE of PHONE(not battery)
find something like 11W30 or 10W30 or 12W30...
Write down the number
Why would you want to use toolbox??
PRESS THANKS if someone helped,don't just say thanks
its 11w35. good thing the techncian ddnt brick it.
i want to install a custom rom and root this thats why i might need the toolbox, am i right?
silenth2o said:
its 11w35. good thing the techncian ddnt brick it.
i want to install a custom rom and root this thats why i might need the toolbox, am i right?
Click to expand...
Click to collapse
Didn't brick during unlock progress? Sooo lucky!!!
-you can install flash-tools app (latest may not support x8) & download a custom kernel then flash kernel ... (read guides)
Then flash roms from recovery
Sent for xda via tapatalk
# always wear your seat belt as it saved my life...:beer:
# sorry for English
silenth2o said:
its 11w35. good thing the techncian ddnt brick it.
i want to install a custom rom and root this thats why i might need the toolbox, am i right?
Click to expand...
Click to collapse
can you ask your technician what method did he used to unlock it?
Don't install toolbox,download Flashtool
With Flashtool you can:
Root
Flash
Install apps
Clean
Install kernel
Install recovery
And for installing custom rom :
Root via flashtool
install recovery via flashtool
Put custom ROM .ZIP file on sd card
Flash custom kernel
go in recovery via phone(by pressing BACK button)
flash rom
tadaaa...you're done
what i remember is that the techncian used "credits" in unlocking but i'll ask him..
ok. flashtool it is.. im just concerned on losing the subscriber unlock and bricking the phone when installing custom kernels and roms..
silenth2o said:
what i remember is that the techncian used "credits" in unlocking but i'll ask him..
ok. flashtool it is.. im just concerned on losing the subscriber unlock and bricking the phone when installing custom kernels and roms..
Click to expand...
Click to collapse
Don't be....everything is easy now when you have your bootlaoder unlocked,just follow instructions carefully and everything should go fine
could't hit the thanks button more than enough..
hello custom world!
Hello developers and xda members!
Some months/weeks ago I asked about rooting and warranty.I got some answers that if I unroot it or use SEUS I will not loose warranty.
This time is about roms and locked bootloaders.
If I install a CWM Recovery then flash a ROM do I void warranty?If yes is there anyway that I can make it so it's like I never flashed anything so the warranty will still last?
If yes what is the best rom I can install for LOCKED bootloader(I don't want to unlock it)?
I want a rom with good battery life + camera (I don't care if it's not 100% perfect but at least better than the stock one!)
Any answer would be helpful!
Thanks
UltraWelfare said:
Hello developers and xda members!
Some months/weeks ago I asked about rooting and warranty.I got some answers that if I unroot it or use SEUS I will not loose warranty.
This time is about roms and locked bootloaders.
If I install a CWM Recovery then flash a ROM do I void warranty?If yes is there anyway that I can make it so it's like I never flashed anything so the warranty will still last?
If yes what is the best rom I can install for LOCKED bootloader(I don't want to unlock it)?
I want a rom with good battery life + camera (I don't care if it's not 100% perfect but at least better than the stock one!)
Any answer would be helpful!
Thanks
Click to expand...
Click to collapse
Search the forum. Many other topics just like yours.
Nanostray said:
Search the forum. Many other topics just like yours.
Click to expand...
Click to collapse
Already searched but I can't find exact answer.I really don't want to loose my warranty!
Also I care for the exact model (Xperia SP) and not for others
UltraWelfare said:
Already searched but I can't find exact answer.I really don't want to loose my warranty!
Also I care for the exact model (Xperia SP) and not for others
Click to expand...
Click to collapse
Even if you unlock your bootlader you wont loose your warranty (if that is the reason you are not doing it).Just make a backup of your DRM keys and the unlock code and keep it safe.
BlAckXpeRia said:
Even if you unlock your bootlader you wont loose your warranty (if that is the reason you are not doing it).Just make a backup of your DRM keys and the unlock code and keep it safe.
Click to expand...
Click to collapse
I don't generally want to unlock bootloader.
Even if I don't unlock it and just install a rom(e.x Existenz) would I need to backup DRM keys?
Also can you give me a SAFE tutorial about backing them up?
I also asked about a good rom that has a good battery life and camera than the stock one.
What's your opinion about roms?What is the best based on your opinion?
UltraWelfare said:
I don't generally want to unlock bootloader.
Even if I don't unlock it and just install a rom(e.x Existenz) would I need to backup DRM keys?
Also can you give me a SAFE tutorial about backing them up?
I also asked about a good rom that has a good battery life and camera than the stock one.
What's your opinion about roms?What is the best based on your opinion?
Click to expand...
Click to collapse
If you wont be unlocking the bootlooder, you dont need the backup.Here is the thread with anything needed to get started with your phone: http://forum.xda-developers.com/showthread.php?t=1701644
I've never used the stock or other based on it (I use 4.3+ ROMs ), but other forum members say that Existenz is the best one out there.Currently, I am using the leaked 4.3,but it is for unlocked bootloaders.
BlAckXpeRia said:
If you wont be unlocking the bootlooder, you dont need the backup.Here is the thread with anything needed to get started with your phone: http://forum.xda-developers.com/showthread.php?t=1701644
I've never used the stock or other based on it (I use 4.3+ ROMs ), but other forum members say that Existenz is the best one out there.Currently, I am using the leaked 4.3,but it is for unlocked bootloaders.
Click to expand...
Click to collapse
Why would I need the list of things to scan with a NFC enabled phone?
Anyway so I will not void my warranty if i flash a custom rom and then "format" it with SEUS?
That's my point
UltraWelfare said:
Why would I need the list of things to scan with a NFC enabled phone?
Anyway so I will not void my warranty if i flash a custom rom and then "format" it with SEUS?
That's my point
Click to expand...
Click to collapse
nope, SUS will just repair the phone, leaving no evidence of root or ROM
Nanostray said:
nope, SUS will just repair the phone, leaving no evidence of root or ROM
Click to expand...
Click to collapse
OK Thanks nanostray (again because you also gave me answers for rooting my phone).
I will proceed installing Xperia ExistenZ rom and I hope I will not brick my phone!:fingers-crossed:
Thanks for any answer
UltraWelfare said:
Why would I need the list of things to scan with a NFC enabled phone?
Anyway so I will not void my warranty if i flash a custom rom and then "format" it with SEUS?
That's my point
Click to expand...
Click to collapse
Oops..wrong link!Here s the right one : http://forum.xda-developers.com/showthread.php?t=2354704
P.S. Im not sure but I think you will still have your warranty.Back in the days, when i had my xperia x8 and it got hardbricked, I lied to my operator that it got fully discharged and it never turned on again.The trick worked and it went to Sony with a custom ROM inside of it .Anyways..today i had to revert to stock, because the tutorial for the leaked 4.3 said so, but i encountered a problem - SUS said that my phone has modified software and it didn't complete the operation.I had to flash an .ftf image file with flashtool.But after all, It was successfull.
Ehm I got a question.At the install instructions of Existenz it says
Flash the rom.
Flash NUT reboot fix: http://forum.xda-developers.com/show....php?t=2317432
Flash 12.0.A.2.254 kernel only with flashtool (see FAQ).
As I see NUT reboot fix is for Xperia Z...Do I need to install this?Do I also need to install .254 kernel only again?At the FAQ it says about How to flash 6.2.B.1.96 Kernel with flashtool <- but this kernel is for Z...What happens?
Should I flash the rom then reboot my phone and OK?
Should I flash the rom then reboot my phone and existenz rom opens and then flash the NUT reboot fix?
Should I flash the rom then instantly install the NUT reboot fix?
Should I also install the kernel (12.0.A.254)?
I am kinda confused :/
UltraWelfare said:
OK Thanks nanostray (again because you also gave me answers for rooting my phone).
I will proceed installing Xperia ExistenZ rom and I hope I will not brick my phone!:fingers-crossed:
Thanks for any answer
Click to expand...
Click to collapse
Always glad to help but remember, in case of unlocked BL, SUS will not work.
Aye, you got a thank button for that, mate
---------- Post added at 08:07 PM ---------- Previous post was at 08:04 PM ----------
UltraWelfare said:
Ehm I got a question.At the install instructions of Existenz it says
Flash the rom.
Flash NUT reboot fix: http://forum.xda-developers.com/show....php?t=2317432
Flash 12.0.A.2.254 kernel only with flashtool (see FAQ).
As I see NUT reboot fix is for Xperia Z...Do I need to install this?Do I also need to install .254 kernel only again?At the FAQ it says about How to flash 6.2.B.1.96 Kernel with flashtool <- but this kernel is for Z...What happens?
Should I flash the rom then reboot my phone and OK?
Should I flash the rom then reboot my phone and existenz rom opens and then flash the NUT reboot fix?
Should I flash the rom then instantly install the NUT reboot fix?
Should I also install the kernel (12.0.A.254)?
I am kinda confused :/
Click to expand...
Click to collapse
1. Flash ROM
1.b Reboot phone
2. Use .bat from NUT (I used it after OTArootkeeper failed and I couldn't mount /system r/w)
3. Flash the kernel with Flashtool
Step 1b and 2 depend on what you prefer, flashing the fix or rebooting and let the computer do the fix: http://forum.xda-developers.com/showthread.php?t=2317432
You can use NUT for the SP. About the kernel I'm not sure. I am on LB atm.
Hope this helps (except for the kernel of course)
Nanostray said:
Always glad to help but remember, in case of unlocked BL, SUS will not work.
Aye, you got a thank button for that, mate
---------- Post added at 08:07 PM ---------- Previous post was at 08:04 PM ----------
1. Flash ROM
1.b Reboot phone
2. Use .bat from NUT (I used it after OTArootkeeper failed and I couldn't mount /system r/w)
3. Flash the kernel with Flashtool
Step 1b and 2 depend on what you prefer, flashing the fix or rebooting and let the computer do the fix: http://forum.xda-developers.com/showthread.php?t=2317432
You can use NUT for the SP. About the kernel I'm not sure. I am on LB atm.
Hope this helps (except for the kernel of course)
Click to expand...
Click to collapse
Everything went fine without using NUT.If problems appear then I will use it!!
Thanks again
UltraWelfare said:
Everything went fine without using NUT.If problems appear then I will use it!!
Thanks again
Click to expand...
Click to collapse
haha not every problem can be solved with NUT
Nanostray said:
haha not every problem can be solved with NUT
Click to expand...
Click to collapse
Haha I know but there it might if it's related...You never know .
Thanks again the new rom made my phone smoother + faster and a lot better.
Now we wait for 4.3 .
UltraWelfare said:
Haha I know but there it might if it's related...You never know .
Thanks again the new rom made my phone smoother + faster and a lot better.
Now we wait for 4.3 .
Click to expand...
Click to collapse
Well, I've no idea how much longer.. Should have been here in December..