Need XXJVQ Firmware for i9000 - Galaxy S I9000 Q&A, Help & Troubleshooting

Ok,So i bricked my SGS and i want to unbrick it. The closest way,i was told was to flash a PDA file. I did the same but still the phone is in a loop(Logo - CVM screen - Logo). So i want a firmware so that i can flash it with odin. Plz help.
I searched for GB Firmwares and found a collection of Firmwares in a thread by Ramad,but all links there are dead. Can anyone hook me up with a working link ?

Why do you want JVQ? If you just want to flash a firmware via Odin so that your phone worked, download this http://d-h.st/4nP , there is 3-file JW5 value pack, pi512, also Odin3 v1.85 and CF-Root kernel

Thanks a lot.. It worked and i managed to get hold of JVQ firmware as well.. but i am stuck at another problem now.. The wifi is not working.. it says turning on but it never really turns on.. not detectng any router nothng..

Related

[Q] odin successful but stuck on boot

hi XDA members ..
am kinda new on this stuff "noob".
i bought my sgs (GT I9000) from KSA with (and am not sure) I9000JPJG8 frimware.
the whole story is that i tried to upgrade to froyo but the process didn't when well and odin was stuck. so i ignorantly pulled the usb out, and had that phone->attention-> pc sign. but i was able to get to download mode. later i noticed that i used a I9000M froyo firmware.
anyway, i read through threads about semi-bricked sgs and found that i must reflash again my stock firmware, and that's what i did.
the odin flash is successful and the phone shows the galaxy s startup screen and then that loading sign and the loop starts ( loading sign appears - disappears -appear again ..etc) i pulled out the battery and powered it on to have a Galaxy s startup screen loop also.
i can't get to recovery mode, and here the names of the firmware i used to flash:
I9000JPJG8
I9000JPJPG
I9000JVJPF
I9000UGJH2
i need the firmware to have arabic support so that's why those above where my choices, but i wouldn't mind losing arabic for z sake of my new sgs
sorry if my english is bad
suggestions???!! and thanx in advance
have you been flashing these firmwares with PIT file ??
i think thats whats needed,
try to flash stock eclair 2.2 or froyo 2.2.1 with all 3 files and 512 pit.
i tried all .pit files to no avail...
and what do u mean by eclair 2.2 , isn't it 2.1 ??! and do u mean pit512 , 513 , 803 by the 3 files or what?
thx for replying
edit:
do u recommend certain odin version because i don't know which to use exactly ?
yea sorry i mean eclair 2.1
whenever i have trouble like you, i flash JM1 in all 3 files (phone pda csc ) and 512 pit, with the repartition box in odin checked.
works a treat everytime
i tried it but it stopped in z middle and odin said (FAIL)
have you made sure KIES is closed, even in the icon tray ??
Are you using odin 1.7 ??
also try to connect your phone direct to the motherboard
if it still fails, post me a screenshot of what odin looks like before you press start
oh my .. kies was closed in icon tray but there were some kies related stuff running when i opened the tasked manager. but unfortnately nothing happened , same things are still there.
here z pic , doing the method u mentioned before
h*tp://imageshack.us/photo/my-images/696/odink.png/
right the problem is you are using a firmware compressed into 1 .tar file
remove the pit file - uncheck re partition
remove phone
remove CSC
all you want is OJP_JG9.tar loaded into PDA.
A MAJOR UPDATE ..
while waiting for replies i tried this method in this post using eugene froyo :
http://forum.xda-developers.com/showpost.php?p=10498057&postcount=14
suprisingly my phone now changed to vibrant on start-up and has z following :
froyo 2.2
baseband T959UVJK2
kernel 2.6.32.9
now that it is alive .. can i shift to z froyo 2.2 with arabic support or do u suggest that i stick to it ?
i think i'll change since everything is messed up ..
vol. buttons are reversed .. music is not played through speaker unless head-phones are used .. numerous apps crashing ..
man am soo confused
you have flashed samsung vibrant on your samsung galaxy
that is why you have these problems !
did you download a GALAXY I9000 ROM ?? if not do so now.
Flash it in odin.
If it comes in 3 files (PDA, Phone, CSC) add 512 PIT and select re-partition
If it comes in 1 .tar file. Load it into PDA and DO NOT USE PIT OR REPARTITION
hit start and done, its so simple.
you really ought to read instructions before you go flashing ROMs.
i really did but it looks like i didn't pay attention to GT I9000/M thing ..
ok thanx for z help and i'll reply back when done with z ROM
i hate to be demanding but can u give me links cause am sick of downloading wrong files ((
www.samfirmware.com
http://forum.xda-developers.com/showthread.php?t=846913
so now my phone powers off when connected with usb ... what shall i do ????
can you boot into recovery ? if so do a full factory reset and try again. and try to flash a rom in recovery (if you have 2e)
i have no idea why the phone powers off with usb.
does it do this in download mode too ??
did you flash a stock rom ?? if so what rom did you choose
i flashed eugene froyo
should i use I9000 method or vibrant method for recovery ??
i got into recovery when i flshed the vibrant rom back then .. :s
edit: a question , have i lost z root thing when i flashed the vibrant or not ?
first of all enter download mode . Try this method ( press home and volume down and insert the usb conected at pc ) , and flash darky resurection 9.2 or ezrom 2.2.1 , i think both have bootloaders , I prefer ezrom ( saved my phone after CM7 or miui )

[Q] I don't now what have i done... PLEASE HELP!

I wanted to root my Samsung galaxy s i9000 (gingerbread) so i followed the procedure that i found on the dkszone "How To Root Samsung Galaxy S On Android 2.3.3 Gingerbread I9000 XXJVK ROM" (I can't post a lik). It looked like it worked but after I turned on wi fi it started rebooting constantly. I removed the battery and reinserted it. After I turned it on, it was the same situation (rebooting). I than flashed it with odin founded on tread "Stuck on main screen after root, keeps rebooting" on this site (pit512 was uploaded with PIT button, repart was chacked).
Now it is dead! Please help me.
Flash 2.2 with bootloaders, then flash Stock 2.3 or any 2.3 rom
if you cant get into download mode u have to try it via jig-method to get into download mode.
if you're in download mode reflash with some stock-rom or darkys ressurection-rom.
be sure you tick on repartition and use the 512-pit file.
u may follow this guide: http://www.darkyrom.com/community/i...-darkyrom-gingerbread-jvh-noob-friendly.3080/
IT WORKED!! I managed to flash it with ginger ROM for SGS. The problem was to get into the download mode.
Thanks guys.

Soft bricked phone via Odin

Hey guys!
I just brought back my phone from the phone to pc icon and it woulnt do anything so now Im back in download mode unsure of what step should be done to fix it.. Here is what happened:
1- Installed latest Miui successfully
2- Since only 3G here works I tried to flash a modem.bin via odin using the phone field. After that the phone turned off and now it just can go in download more (yellow android guy) or pc to phone icon...
What should I do now ? thought it was the good way to put a new modem file for 850mhz..
Help would be greatly appreciated
Try flashing the Ezbase 2.2 with the .pit file then follow the guide on the Miui MCg page to get back to Miui. The Samsung radio files .tar don't work with CM7/Miui and you don't put just a modem.bin file into that field whatever rom your on. Get the modem you want from here: http://codeworkx.de/download/cyanogenmod/ And flash it via CWM.
+ 1 to the above,
GTi9000 insanity cm012/glitch

I9000 rom on i9001

Moin
I Have a easy Question....
Is it possible to flash an i9000 rom on the i9001
because i want flash darknight 2.1 rom with android 4.0.4
thank a lot for answers
Lump800
Do not do such things! ! ! Your phone may already be obsolete. I9000 and i9001 is a very different phones! ! !
Wysłane z mojego GT-I9001
Thank you kept me in front of a large error.
I had almost a door-stopper beautiful.
translated by google translator
sorry for that my english in not the best
Noo nooo and noooooooo. this is the fastest ticket to a broken phone
don't even think about it
is it possible to flash i9001 file to i9001 after i9000 firmware
it possible to flash i9001 file to i9001 after i9000 firmware. i had accidently flashed i9000 firmware on i9001 . now i want to flash it back to orginal firmware . is there anyway to rescue it
thanks a lot
darkeye said:
it possible to flash i9001 file to i9001 after i9000 firmware. i had accidently flashed i9000 firmware on i9001 . now i want to flash it back to orginal firmware . is there anyway to rescue it
thanks a lot
Click to expand...
Click to collapse
should be possible, you need to find the oldest possible stock rom and try flashing it with AiresVE.ops , MultiLoader Odin v.4.43
This happened to me, someone flashed cm for i9000 on i9001 and it worked for a while but it progressively started crashing, i took that phone and tried flashing stock but never could get pass setup connection in odin 4.43, tried all the variations (driver reinstall, new cable, remove battery, other PC etc) and in a hail marry attempt i managed to flash i9000 stock witch odin 1.83. Phone now works, enters download and recovery mode, but i still cant get past same error in odin 4.43 or flash custom recovery i any way (verification error from update method, adb flash just doesnt stick). ROM manager sees some custom recoveries but i cant enter them, my guess is because of different pit file from i9000.
Havent tried flashing i9001 rom with odin 1.83 because i cant use ariesve.obs from 4.43, i managed to connect to phone with heimdall and download pit, so that kind of connection works. My guess is that if i could somehow create pit file for this phone that works with heimdal i could flash proper stock rom, so im here to ask is it possible and how would i do it ?

[Q] I have bricked my I9000?

Hi,
I have a I9000BVJP4 (FROYO.BVJS4) phone bought in 2011 from Orange in the UK. I was trying to root the bastard to get Jelly Bean on it. I coulddnàt get 4zroot to root it, neither Once Click root method (earlier would not reboot the phone and Titanium said it wasn't rooted anyway and the second just said "failed" when it got to the end of the process).
So I decided to use the CF root method. I downloaded the various cf kernels here http://forum.xda-developers.com/showthread.php?t=788108 as I thought I needed to match the JS bit. So I tried JS3 which looped on intial screen the first time. JS5 and JS7 just hang on the first screen. Clearly I can get ODIN 3.07 to upload these kernels so I can get the phone to switch to download mode. THe problem is that it hangs and never boot.
I'm a bit of newbie with this stuff but I understand that as long as i can get into download mode I haven't bricked the beast. THe problem is that I donàt know how to out of this situation. I bet it's just a question of finding the right kernel and uploading with ODIN. Any suggestions? I presume the phone is still unrooted (or maybe not now that I have all these kernels uploaded through ODIN?)
Your help would be most appreciated.
Many thanks
Antonio
geotux said:
Hi,
I have a I9000BVJP4 (FROYO.BVJS4) phone bought in 2011 from Orange in the UK. I was trying to root the bastard to get Jelly Bean on it. I coulddnàt get 4zroot to root it, neither Once Click root method (earlier would not reboot the phone and Titanium said it wasn't rooted anyway and the second just said "failed" when it got to the end of the process).
So I decided to use the CF root method. I downloaded the various cf kernels here http://forum.xda-developers.com/showthread.php?t=788108 as I thought I needed to match the JS bit. So I tried JS3 which looped on intial screen the first time. JS5 and JS7 just hang on the first screen. Clearly I can get ODIN 3.07 to upload these kernels so I can get the phone to switch to download mode. THe problem is that it hangs and never boot.
I'm a bit of newbie with this stuff but I understand that as long as i can get into download mode I haven't bricked the beast. THe problem is that I donàt know how to out of this situation. I bet it's just a question of finding the right kernel and uploading with ODIN. Any suggestions? I presume the phone is still unrooted (or maybe not now that I have all these kernels uploaded through ODIN?)
Your help would be most appreciated.
Many thanks
Antonio
Click to expand...
Click to collapse
Here's the download link for XXJVU ,
http://hotfile.com/dl/145862376/8b52c96/I9000XWJVU_I9000TMNJV4_TMN.zip.html
hope you know how to flash the firmware and the pit file is attached , while selecting the files to flash , check the .pit file and select the attached .pit file and check the repartition option in odin , and flash the firmware this will wipe all your partitions and and a new clean firmware will be installed .Now how to root your phone , download this kernel its semaphore 2.5.0 beta JVU
http://www.semaphore.gr/kernels/Semaphore_2.5.0.tar
flash this kernel by selecting the PDA file in the odin menu , now your phone is rooted . and you can install any desired custom rom.
This rocks ...
dashing_9508 said:
Here's the download link for XXJVU ,
http://hotfile.com/dl/145862376/8b52c96/I9000XWJVU_I9000TMNJV4_TMN.zip.html
hope you know how to flash the firmware and the pit file is attached , while selecting the files to flash , check the .pit file and select the attached .pit file and check the repartition option in odin , and flash the firmware this will wipe all your partitions and and a new clean firmware will be installed .Now how to root your phone , download this kernel its semaphore 2.5.0 beta JVU
http://www.semaphore.gr/kernels/Semaphore_2.5.0.tar
flash this kernel by selecting the PDA file in the odin menu , now your phone is rooted . and you can install any desired custom rom.
Click to expand...
Click to collapse
Mate,
cheers for this although the XXJVU ROM you suggested didn't work. I decided to give the XXJVT version a go which I downloaded from here http://forum.xda-developers.com/showthread.php?t=1102881 and I tell you this rocks. I've finally got rotation working again and have got rid of all the crap that Orange installed.
Do you know if Jelly Bean works on the I9000 and how it performs? Is it worth installing on such an "old" device? BTW, I used the same pit file you attached. That did work. Thanks again.
geotux said:
Mate,
cheers for this although the XXJVU ROM you suggested didn't work. I decided to give the XXJVT version a go which I downloaded from here http://forum.xda-developers.com/showthread.php?t=1102881 and I tell you this rocks. I've finally got rotation working again and have got rid of all the crap that Orange installed.
Do you know if Jelly Bean works on the I9000 and how it performs? Is it worth installing on such an "old" device? BTW, I used the same pit file you attached. That did work. Thanks again.
Click to expand...
Click to collapse
No problem ever . yep, Jellybean works , infact it rocks ! . the stock gingerbread firmware is crap if compared with jellybean . I use cm 10.1 Android 4.2.2 makes my phone butter smooth doesn't matter its quite old though but works like a charm. did you root your phone ? using semaphore kernel ? you have to root it first to install jellybean for XXJVT , here's the link for the kernel :-
http://78.46.194.137/kernels/Semaphore_kernel_JVT_1.9.1.tar
flash it the way i told you , you have to select it in the PDA file option in Odin. hope it works for you now .
http://www.youtube.com/watch?v=1RoZU5ZPMS4
http://www.darkyrom.com/index.php?posts/180469/
check these out

Categories

Resources