Database Develop

[Q] odin successful but stuck on boot

hi XDA members ..
am kinda new on this stuff "noob".
i bought my sgs (GT I9000) from KSA with (and am not sure) I9000JPJG8 frimware.
the whole story is that i tried to upgrade to froyo but the process didn't when well and odin was stuck. so i ignorantly pulled the usb out, and had that phone->attention-> pc sign. but i was able to get to download mode. later i noticed that i used a I9000M froyo firmware.
anyway, i read through threads about semi-bricked sgs and found that i must reflash again my stock firmware, and that's what i did.
the odin flash is successful and the phone shows the galaxy s startup screen and then that loading sign and the loop starts ( loading sign appears - disappears -appear again ..etc) i pulled out the battery and powered it on to have a Galaxy s startup screen loop also.
i can't get to recovery mode, and here the names of the firmware i used to flash:
I9000JPJG8
I9000JPJPG
I9000JVJPF
I9000UGJH2
i need the firmware to have arabic support so that's why those above where my choices, but i wouldn't mind losing arabic for z sake of my new sgs
sorry if my english is bad
suggestions???!! and thanx in advance

have you been flashing these firmwares with PIT file ??
i think thats whats needed,
try to flash stock eclair 2.2 or froyo 2.2.1 with all 3 files and 512 pit.

i tried all .pit files to no avail...
and what do u mean by eclair 2.2 , isn't it 2.1 ??! and do u mean pit512 , 513 , 803 by the 3 files or what?
thx for replying
edit:
do u recommend certain odin version because i don't know which to use exactly ?

yea sorry i mean eclair 2.1
whenever i have trouble like you, i flash JM1 in all 3 files (phone pda csc ) and 512 pit, with the repartition box in odin checked.
works a treat everytime

i tried it but it stopped in z middle and odin said (FAIL)

have you made sure KIES is closed, even in the icon tray ??
Are you using odin 1.7 ??
also try to connect your phone direct to the motherboard
if it still fails, post me a screenshot of what odin looks like before you press start

oh my .. kies was closed in icon tray but there were some kies related stuff running when i opened the tasked manager. but unfortnately nothing happened , same things are still there.
here z pic , doing the method u mentioned before
h*tp://imageshack.us/photo/my-images/696/odink.png/

right the problem is you are using a firmware compressed into 1 .tar file
remove the pit file - uncheck re partition
remove phone
remove CSC
all you want is OJP_JG9.tar loaded into PDA.

A MAJOR UPDATE ..
while waiting for replies i tried this method in this post using eugene froyo :
http://forum.xda-developers.com/showpost.php?p=10498057&postcount=14
suprisingly my phone now changed to vibrant on start-up and has z following :
froyo 2.2
baseband T959UVJK2
kernel 2.6.32.9
now that it is alive .. can i shift to z froyo 2.2 with arabic support or do u suggest that i stick to it ?

i think i'll change since everything is messed up ..
vol. buttons are reversed .. music is not played through speaker unless head-phones are used .. numerous apps crashing ..
man am soo confused

you have flashed samsung vibrant on your samsung galaxy
that is why you have these problems !
did you download a GALAXY I9000 ROM ?? if not do so now.
Flash it in odin.
If it comes in 3 files (PDA, Phone, CSC) add 512 PIT and select re-partition
If it comes in 1 .tar file. Load it into PDA and DO NOT USE PIT OR REPARTITION
hit start and done, its so simple.
you really ought to read instructions before you go flashing ROMs.

i really did but it looks like i didn't pay attention to GT I9000/M thing ..
ok thanx for z help and i'll reply back when done with z ROM

i hate to be demanding but can u give me links cause am sick of downloading wrong files ((

www.samfirmware.com
http://forum.xda-developers.com/showthread.php?t=846913

so now my phone powers off when connected with usb ... what shall i do ????

can you boot into recovery ? if so do a full factory reset and try again. and try to flash a rom in recovery (if you have 2e)
i have no idea why the phone powers off with usb.
does it do this in download mode too ??
did you flash a stock rom ?? if so what rom did you choose

i flashed eugene froyo
should i use I9000 method or vibrant method for recovery ??
i got into recovery when i flshed the vibrant rom back then .. :s
edit: a question , have i lost z root thing when i flashed the vibrant or not ?

first of all enter download mode . Try this method ( press home and volume down and insert the usb conected at pc ) , and flash darky resurection 9.2 or ezrom 2.2.1 , i think both have bootloaders , I prefer ezrom ( saved my phone after CM7 or miui )

[Q] i9000 tried to flash CM9...kinda fsck'ed

[email protected],
after successfully flashing CM9 to my Defy I convinced my friend to go to ICS as well...so far so good/bad!
I followed the guide to install CMW recovery and did a backup of the stock ROM.
After this I copied CM9 nightly and the google apps package to the internal memory...apperantely the zip package of the google apps was bad, so i tried to boot into CM9..it took a damn long time, so I removed the battery (OK, bad move...but so be it don't bit*h about it!)..CM9 booted but said someting about "encryption of the storage failed..please do a factory wipe"......I did so, using CWM recovery...which ended me up in a boot loop without having access to CMW recvry.
So I thought, flashing the zImage again with heimdall will have the bootloader rewritten (maybe the 2nd bad move this day) so I can access recovery again...I imagined zImage was kinda like a BIOS of a PC...apparently it is NOT
After some google-f00 I found out I have to flash an official FW from samsung, with repartitioning,using odin, am I right?
But the probel is, that they tell me to do a *#7465625# to find out details about the stock firmware...but this is not bossible because the phone hangs at the galaxy s boot logo.
So my question is...what can I do to access either recovery or the stock firmware with a phone stuck at boot logo (i can boot into download mode) and having only a nandroid backup of the stock rom?
Can anybody tell me what to do without spending 200 coins to obtain another SGS for my friend (Yeah, I told him that the risk is to brick the SGS, but I have a kind of guilty conscience.
Hope someone can help...
Thanks a lot!

Odin doesnt care about whats currently on your phone . Just go to samfirmware. Com, find a nice stock rom (2.3.3) for i9000, and flash it with odin. If you dont know how to use odin: use the search button in the i9000 section ''how to use odin''. keep us updated / or if you have any other questions :thumbup:
Stoux
Edit: Check this thread out http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using xda premium

hey
when i screwed my sgs, odin + darky ressurection rom helped
i can't post a link , google "Darkys_v9.2_Resurrection_Edition.zip" ,though i can't remember if i used that version. some got removed, try to look for a sourceforge link. That still works
and see the reply above how to use odin

Hey,
There are also lots of tutorials on youtube, and other sites to show how to flash an original rom. I also screwed up my install of CM9. And then I followed this guide to get the original rom running again.
w w w.theandroidsoul.com/download-install-xxjvs-firmware-update-galaxy-s-i9000-to-android-2-3-5/
After that, use this link for rooting + CWM:
w w w.theandroidsoul.com/root-xxjvs/
Greets from Holland !
PS: can't link -_- so you have to copy and paste the URL.

Skeesicks said:
[email protected],
after successfully flashing CM9 to my Defy I convinced my friend to go to ICS as well...so far so good/bad!
I followed the guide to install CMW recovery and did a backup of the stock ROM.
After this I copied CM9 nightly and the google apps package to the internal memory...apperantely the zip package of the google apps was bad, so i tried to boot into CM9..it took a damn long time, so I removed the battery (OK, bad move...but so be it don't bit*h about it!)..CM9 booted but said someting about "encryption of the storage failed..please do a factory wipe"......I did so, using CWM recovery...which ended me up in a boot loop without having access to CMW recvry.
So I thought, flashing the zImage again with heimdall will have the bootloader rewritten (maybe the 2nd bad move this day) so I can access recovery again...I imagined zImage was kinda like a BIOS of a PC...apparently it is NOT
After some google-f00 I found out I have to flash an official FW from samsung, with repartitioning,using odin, am I right?
But the probel is, that they tell me to do a *#7465625# to find out details about the stock firmware...but this is not bossible because the phone hangs at the galaxy s boot logo.
So my question is...what can I do to access either recovery or the stock firmware with a phone stuck at boot logo (i can boot into download mode) and having only a nandroid backup of the stock rom?
Can anybody tell me what to do without spending 200 coins to obtain another SGS for my friend (Yeah, I told him that the risk is to brick the SGS, but I have a kind of guilty conscience.
Hope someone can help...
Thanks a lot!
Click to expand...
Click to collapse
hmmm... i read from another site there are some custom rom that requires the phone to be in a rooted stock rom or another custom rom...
example:
to install Galaxy S GT I9000 with Orange Amestris v7.3 ROM Custom Firmware you need to be on stock XWJW1 or XXJVU Firmware since the baseband of "amestris" would be on xwjw1 or xxjvu or custom rom with the same baseband...
what stock rom/firmware the phone was in anyway?im guessing gingerbread stock rom? you still got a chance to update it right since you can access download mode...
from what i can remember, i updated my boyfrnd's s2 from gingerbread to official ics from "sammobile".com (remove quote)
then updated it to a custom rom...
well this might be irrelevant but this is how i updated my galaxy s:
well on my galaxy s i updated it from gingerbread stock rom rooted to gingerbread miui then to ics miui andy's version, since im on ics i have successfully tried different ics custom rom like darknight, slimics, elite etc...
hope this kinda help =]

Thanks a lot...I flashed the original firmware (it didn't start properly, but I don't care) and with this was able to flash the zImage again...then I was able to access bootloader and reinstall CM9

Galaxy S ODIN Flash

Guys I've got a problem with my Galaxy S i9000 with CM9. It stopped working after restart (endless loop on Cyangenmod logo) and now I'cant get to recovery mode. Only download mode works, so I think that I must to flash it with ODIN. And there is a problem, because I can't find proper CM9 ROM files for ODIN. And what version of ODIN should I use? Now I've got 4.38 and phone is visible - it's OK?
I will be very pleased for ROM files to ODIN and some instructions how to flash it propely. I've read many threads from morning, but I can't find ROMs

Hi there,
afaik there are no CM Versions flashable via ODIN.Use ODIN to flash a Stock firmware, then install ClockworkModRecovery and Install CM9 via CWM.
You should try to take Out your Battery for about 5 minutes and try to enter Recovery Mode.
About the Odin Version: If you look at different "howto use ODIN tutorials" there are different Versions "recommended" I've used multiple ODIN Versions eg 1.3 / 1.83 and every Version made a good job.
Give this a try if Battery-out for 5 Minutes does't take you back to recovery
http://hdtechvideo.com/community/index.php?threads/flashing-rom-using-odin-step-by-step.64/
Regards
Geniac
Opson said:
Guys I've got a problem with my Galaxy S i9000 with CM9. It stopped working after restart (endless loop on Cyangenmod logo) and now I'cant get to recovery mode. Only download mode works, so I think that I must to flash it with ODIN. And there is a problem, because I can't find proper CM9 ROM files for ODIN. And what version of ODIN should I use? Now I've got 4.38 and phone is visible - it's OK?
I will be very pleased for ROM files to ODIN and some instructions how to flash it propely. I've read many threads from morning, but I can't find ROMs
Click to expand...
Click to collapse

Opson said:
Guys I've got a problem with my Galaxy S i9000 with CM9. It stopped working after restart (endless loop on Cyangenmod logo) and now I'cant get to recovery mode. Only download mode works, so I think that I must to flash it with ODIN. And there is a problem, because I can't find proper CM9 ROM files for ODIN. And what version of ODIN should I use? Now I've got 4.38 and phone is visible - it's OK?
I will be very pleased for ROM files to ODIN and some instructions how to flash it propely. I've read many threads from morning, but I can't find ROMs
Click to expand...
Click to collapse
you should flash the stock rom got 3 type file, that mean the file after download got pda, csc and modam file, like 2.3.6 XXjvu, please dont flash the file after download only have 1 file only, like XXjw5.

Need XXJVQ Firmware for i9000

Ok,So i bricked my SGS and i want to unbrick it. The closest way,i was told was to flash a PDA file. I did the same but still the phone is in a loop(Logo - CVM screen - Logo). So i want a firmware so that i can flash it with odin. Plz help.
I searched for GB Firmwares and found a collection of Firmwares in a thread by Ramad,but all links there are dead. Can anyone hook me up with a working link ?

Why do you want JVQ? If you just want to flash a firmware via Odin so that your phone worked, download this http://d-h.st/4nP , there is 3-file JW5 value pack, pi512, also Odin3 v1.85 and CF-Root kernel

Thanks a lot.. It worked and i managed to get hold of JVQ firmware as well.. but i am stuck at another problem now.. The wifi is not working.. it says turning on but it never really turns on.. not detectng any router nothng..

[Q] I have bricked my I9000?

Hi,
I have a I9000BVJP4 (FROYO.BVJS4) phone bought in 2011 from Orange in the UK. I was trying to root the bastard to get Jelly Bean on it. I coulddnàt get 4zroot to root it, neither Once Click root method (earlier would not reboot the phone and Titanium said it wasn't rooted anyway and the second just said "failed" when it got to the end of the process).
So I decided to use the CF root method. I downloaded the various cf kernels here http://forum.xda-developers.com/showthread.php?t=788108 as I thought I needed to match the JS bit. So I tried JS3 which looped on intial screen the first time. JS5 and JS7 just hang on the first screen. Clearly I can get ODIN 3.07 to upload these kernels so I can get the phone to switch to download mode. THe problem is that it hangs and never boot.
I'm a bit of newbie with this stuff but I understand that as long as i can get into download mode I haven't bricked the beast. THe problem is that I donàt know how to out of this situation. I bet it's just a question of finding the right kernel and uploading with ODIN. Any suggestions? I presume the phone is still unrooted (or maybe not now that I have all these kernels uploaded through ODIN?)
Your help would be most appreciated.
Many thanks
Antonio

geotux said:
Hi,
I have a I9000BVJP4 (FROYO.BVJS4) phone bought in 2011 from Orange in the UK. I was trying to root the bastard to get Jelly Bean on it. I coulddnàt get 4zroot to root it, neither Once Click root method (earlier would not reboot the phone and Titanium said it wasn't rooted anyway and the second just said "failed" when it got to the end of the process).
So I decided to use the CF root method. I downloaded the various cf kernels here http://forum.xda-developers.com/showthread.php?t=788108 as I thought I needed to match the JS bit. So I tried JS3 which looped on intial screen the first time. JS5 and JS7 just hang on the first screen. Clearly I can get ODIN 3.07 to upload these kernels so I can get the phone to switch to download mode. THe problem is that it hangs and never boot.
I'm a bit of newbie with this stuff but I understand that as long as i can get into download mode I haven't bricked the beast. THe problem is that I donàt know how to out of this situation. I bet it's just a question of finding the right kernel and uploading with ODIN. Any suggestions? I presume the phone is still unrooted (or maybe not now that I have all these kernels uploaded through ODIN?)
Your help would be most appreciated.
Many thanks
Antonio
Click to expand...
Click to collapse
Here's the download link for XXJVU ,
http://hotfile.com/dl/145862376/8b52c96/I9000XWJVU_I9000TMNJV4_TMN.zip.html
hope you know how to flash the firmware and the pit file is attached , while selecting the files to flash , check the .pit file and select the attached .pit file and check the repartition option in odin , and flash the firmware this will wipe all your partitions and and a new clean firmware will be installed .Now how to root your phone , download this kernel its semaphore 2.5.0 beta JVU
http://www.semaphore.gr/kernels/Semaphore_2.5.0.tar
flash this kernel by selecting the PDA file in the odin menu , now your phone is rooted . and you can install any desired custom rom.

This rocks ...
dashing_9508 said:
Here's the download link for XXJVU ,
http://hotfile.com/dl/145862376/8b52c96/I9000XWJVU_I9000TMNJV4_TMN.zip.html
hope you know how to flash the firmware and the pit file is attached , while selecting the files to flash , check the .pit file and select the attached .pit file and check the repartition option in odin , and flash the firmware this will wipe all your partitions and and a new clean firmware will be installed .Now how to root your phone , download this kernel its semaphore 2.5.0 beta JVU
http://www.semaphore.gr/kernels/Semaphore_2.5.0.tar
flash this kernel by selecting the PDA file in the odin menu , now your phone is rooted . and you can install any desired custom rom.
Click to expand...
Click to collapse
Mate,
cheers for this although the XXJVU ROM you suggested didn't work. I decided to give the XXJVT version a go which I downloaded from here http://forum.xda-developers.com/showthread.php?t=1102881 and I tell you this rocks. I've finally got rotation working again and have got rid of all the crap that Orange installed.
Do you know if Jelly Bean works on the I9000 and how it performs? Is it worth installing on such an "old" device? BTW, I used the same pit file you attached. That did work. Thanks again.

geotux said:
Mate,
cheers for this although the XXJVU ROM you suggested didn't work. I decided to give the XXJVT version a go which I downloaded from here http://forum.xda-developers.com/showthread.php?t=1102881 and I tell you this rocks. I've finally got rotation working again and have got rid of all the crap that Orange installed.
Do you know if Jelly Bean works on the I9000 and how it performs? Is it worth installing on such an "old" device? BTW, I used the same pit file you attached. That did work. Thanks again.
Click to expand...
Click to collapse
No problem ever . yep, Jellybean works , infact it rocks ! . the stock gingerbread firmware is crap if compared with jellybean . I use cm 10.1 Android 4.2.2 makes my phone butter smooth doesn't matter its quite old though but works like a charm. did you root your phone ? using semaphore kernel ? you have to root it first to install jellybean for XXJVT , here's the link for the kernel :-
http://78.46.194.137/kernels/Semaphore_kernel_JVT_1.9.1.tar
flash it the way i told you , you have to select it in the PDA file option in Odin. hope it works for you now .

http://www.youtube.com/watch?v=1RoZU5ZPMS4
http://www.darkyrom.com/index.php?posts/180469/
check these out