Need eclair / froyo official ROM for my motorola milestonme a853.
I have tried installing
1.CM7
2.CM9
3.MIUI
Everything is installing properly, but whats the problem is phone gets partially freezed(no response to touch) after a hour of inactivity.
again i have restart the mobile manually. Could be a firmware prob?
Please sumbody suggest something. or else jus reply back with official rom
satheesh4990 said:
Need eclair / froyo official ROM for my motorola milestonme a853.
I have tried installing
1.CM7
2.CM9
3.MIUI
Everything is installing properly, but whats the problem is phone gets partially freezed(no response to touch) after a hour of inactivity.
again i have restart the mobile manually. Could be a firmware prob?
Please sumbody suggest something. or else jus reply back with official rom
Click to expand...
Click to collapse
I've used CM9 and now CM10, but no such a problem here. (maybe it's hardware related? :S)
If you really want to go back to stock than read THIS thread.
Thanks
Erovia said:
I've used CM9 and now CM10, but no suck a problem here. (maybe it's hardware related? :S)
If you really want to go back to stock than read THIS thread.
Click to expand...
Click to collapse
I know to make it back to stock/unroot/downgrade it.
The problem i dint take backup of original/stock rom eclair(2.1), I need it eventually
Related
Hi
I've upgraded to 2.3.3 and my camera doesnt work anymore. The screen comes black for a few seconds and then the message "Camera error. Cannot connect to camera" appears. The flashlight is also doesnt work. I have some MoDaCo firmware HTC Sense before, as I remember...
Help me to fix it, please.
Thanks
Flash newer radio.
Jack_R1 said:
Flash newer radio.
Click to expand...
Click to collapse
Could you tell me how to do it, pls? What is the last version of radio? How to check it?
Settings / About / Baseband
If the version is 4.06 / 5.08 / 5.12 (the version is in the middle of the long string there) - then there's some other problem in the system. If the version is 4.02 or 4.04 - then you need to go to Developers forum, open any Gingerbread ROM thread, and see the instructions for flashing Radio. Or look at my signature.
Jack_R1 said:
Settings / About / Baseband
If the version is 4.06 / 5.08 / 5.12 (the version is in the middle of the long string there) - then there's some other problem in the system. If the version is 4.02 or 4.04 - then you need to go to Developers forum, open any Gingerbread ROM thread, and see the instructions for flashing Radio. Or look at my signature.
Click to expand...
Click to collapse
The Baseband Version is 32.41.00.32U_5.08.00.04
What I'm thinking is could it be the problem because my Nexus had non original firmware before the GB update, and maybe I didnt make some important thing which blocking my camera now? Maybe I need to re-flash the radio with some original image? I'm totally NOOB in all these things...
Your radio is 5.08 - which means it's updated and the problem is elsewhere.
If you didn't upgrade to Gingerbread from a clean FRG83G build, but from some other build - you'll need to reflash the ROM. You can do it if you have unlocked bootloader. Read Wiki, it has the guide for installing custom ROMs - execute it, and use Gingerbread stock build from one of the threads in Development forum.
Jack_R1 said:
Your radio is 5.08 - which means it's updated and the problem is elsewhere.
If you didn't upgrade to Gingerbread from a clean FRG83G build, but from some other build - you'll need to reflash the ROM. You can do it if you have unlocked bootloader. Read Wiki, it has the guide for installing custom ROMs - execute it, and use Gingerbread stock build from one of the threads in Development forum.
Click to expand...
Click to collapse
Thanks for your advices. Just upgraded the radio to 5.12 via fastboot. The camera still not work Will try to flash to original state...
ok, i've tried to rollback to original FRG83, se-flashed boot, recovery, but no luck - camera didnt started. Hovewer, i tried the flashlight torch and it started to work (it didn't like a camera before), so I'm sure now the camera issue is the software now - not a hardware.
Does anybody have some advices?
P0MkA said:
ok, i've tried to rollback to original FRG83, se-flashed boot, recovery, but no luck - camera didnt started. Hovewer, i tried the flashlight torch and it started to work (it didn't like a camera before), so I'm sure now the camera issue is the software now - not a hardware.
Does anybody have some advices?
Click to expand...
Click to collapse
How did you flash frg83? via passimg or you flashed rooted rom from dev section? If you didn't use passimg method you should try wiping everything (cache, dalvik, factory reset) from the recovery.
BTW, if you have custom recovery you should be able to restore nandroid backup (which I assume you did;P ) and see if there is this problem too.
Cheers!
k_myk said:
How did you flash frg83? via passimg or you flashed rooted rom from dev section? If you didn't use passimg method you should try wiping everything (cache, dalvik, factory reset) from the recovery.
BTW, if you have custom recovery you should be able to restore nandroid backup (which I assume you did;P ) and see if there is this problem too.
Cheers!
Click to expand...
Click to collapse
i've flashed frg83 using fastboot. And updated to 2.3.3 via recovery (RA-passion-v2.2.1). And yes, I wiped everything using the recovery. Unfortunately, I do not know what is nandroid backup, so I didnt do it
Hope there is a way to get my camera back to work... Could you tell me what to do, step by step, to make my Nexus fully functional with the 2.3.3 firmware, please!
P0MkA said:
i've flashed frg83 using fastboot. And updated to 2.3.3 via recovery (RA-passion-v2.2.1). And yes, I wiped everything using the recovery. Unfortunately, I do not know what is nandroid backup, so I didnt do it
Hope there is a way to get my camera back to work... Could you tell me what to do, step by step, to make my Nexus fully functional with the 2.3.3 firmware, please!
Click to expand...
Click to collapse
I'd love to, but unfortunately I don't know what causes this problem at the moment I think it wouldn't hurt to try loging what is going on when you open camera.apk. Try adb logcat from your pc or install "alogcat" from market, start camera app and paste here the log file.
Lesson for future always do nandroid backup You can do this from recovery, it will do phone's memory image Then you can always revert back to what you had before flashing new rom
k_myk said:
I'd love to, but unfortunately I don't know what causes this problem at the moment I think it wouldn't hurt to try loging what is going on when you open camera.apk. Try adb logcat from your pc or install "alogcat" from market, start camera app and paste here the log file.
Lesson for future always do nandroid backup You can do this from recovery, it will do phone's memory image Then you can always revert back to what you had before flashing new rom
Click to expand...
Click to collapse
Yeah... backuping is a cool thing.... It is just my first experience with the Android phone... Maybe will find some kind of solution for this...
Well... Problem stays... However I've found few interesting things. As I've mentioned above, after the 2.3.3 update the camera and flashlight doesnt work enymore. But I've installed Z-DeviceTest and found that after the reboot this app (which provides the hardware test) sees the camera and flashlight! But, unfirtunately, doesnt able to test it. Moreover, if to start some torchlight widget directly after the reboot, the flashlight works!!! But it is not after the camera start... So, maybe someone will find this information useful.
@Pomka
have you found the Satu Solution yet ?
mmm. i guess you borrow from somebody the nandroid back up and restore it...
then u will know whether it is a hardware issue or Software Issue.
Logic ?
sevensaints said:
@Pomka
have you found the Satu Solution yet ?
mmm. i guess you borrow from somebody the nandroid back up and restore it...
then u will know whether it is a hardware issue or Software Issue.
Logic ?
Click to expand...
Click to collapse
Stupid actually. Its stay the same, not working....
found the solution!
http://forum.xda-developers.com/showthread.php?t=717870&highlight=frf91
You have go go back to stock ROM.....then camera Happy Trigger Finger!
yeah...
1. Go back to stock through HBOOT
2. Flash back ur fav ROM - mine-MIUI AU
pls click thanks
Hey guys,
I've recently been having some weird problems.
Firstly my (external) SD card has been acting really weird, showing as "Blank or corrupt" and unable to format it.
Another problem is now, SMS notifications for the stock app don't work. This happened randomly overnight.
I have tried flashing again, with a wipe, to no avail.
My ROM etc is attached as a screenshot.
If you need any more info just tell me what to put.
http://lh6.ggpht.com/-EboZlAJhuTw/Tg9LWVC9gXI/AAAAAAAABQQ/i7gYBsyT3Pg/s1024/SC20110702-163054.png
Thanks everyone,
Luke.
Sent from my GT-I9000 using XDA App
Time to flash to gingerbread? (darkys 10.1 would be and easy upgrade from 9.5)
Else try flashing the stock rom that came with the phone?
Vivasanti said:
Time to flash to gingerbread? (darkys 10.1 would be and easy upgrade from 9.5)
Else try flashing the stock rom that came with the phone?
Click to expand...
Click to collapse
Yeah I was thinking of doing that, I'm going to be sending my phone off for repairs soon anyway, so need to put it back to stock anyhow.
I've had a lot of problems with Darky's 10.1 though so i'm gna try stock GB and see if it solves anything.
If not, I'll flash to stock and send it off, see if they replace anything apart from the earpiece xD
Hi, I have rooted 2.3.6 (I9000XXJVT). There is random problem with dialer. It's crashing when I start dialing number and just back to home screen without warning. Any help? PS. The same was with older version of android. THANKS!
i have this issue to
does anybody know the solution if not i think i might have to reflash via odin
Have you tested to see if the proximity or light sensors are faulty as i had similar crash problems force closes and just returning to the home screen and it is my proximity sensor not working and when you try to make the call and the phone dont do what the cpu is saying that's not right it just gives up
sent by looney on his galaxy gti9000 via xda app u no u gotta love the droid
sumsy2011 said:
does anybody know the solution if not i think i might have to reflash via odin
Click to expand...
Click to collapse
reflash giving nothing... Still the same...
Try this:http://www.mediafire.com/?h9n6e4qwagaln3f
Copy two files in system /app and then reboot.
your rom ust be rooted and deoxeded
First of all, @OP and followers:
I think that you have force close error on com.android.phone, right?
Second, for the helpful guy: the solution depends: there are two version of fix, for odexed and deodexed phone, both available After magic button: SEARCH use
no FC's just exits i tried wipe data thrum titanium backup but it works for a short time. it is really annoying and it happened to me since jvq i think and now i am on jw1
gigeaky said:
no FC's just exits i tried wipe data thrum titanium backup but it works for a short time. it is really annoying and it happened to me since jvq i think and now i am on jw1
Click to expand...
Click to collapse
same here...
and this stops you from trying the solution provided above? OK guys, so please wait. I hope that within 12 months someone will look for it specifically, as you do not want to replace phone.apk.
I've just installed I9000XXJVU|2.3.6|OXA| and problem seems to be solved: http://forum.xda-developers.com/showthread.php?t=1431596
i have same problem so looking for a different rom.
was on jvu 2.3.6
i had same problem with jetpack v9 flashed darky 10.4.2 running smooth also has a phone fix in darky ota app dialer working great no probs whatso ever
Hey guys, so i got my phone serviced yday and ever since im unable to use any of the Custom ROMS available.
I tried every possibilities, but some how even though im able to install it via recovery, im unable to enter the ROM due to the continuous Boot loop without any animations too.
But im able to FLASH the Normal Stock Roms as many times as i want.
Never experienced this trouble before at all.
Please help/guide me to resolve this issue.
Unable to use my phone without Custom ROMS.
Thanks in advance!
at least can someone give me all their files that comes when u plug in the phone into Polling mode??
thanks!
I don't think you need that.
Check the kernel version of the stock Rom you have and the custom Rom you want to install. They have to be the same version or you will continuously be getting boot loops.
Sent from my FIH-FB0 using xda premium
wesleyel said:
I don't think you need that.
Check the kernel version of the stock Rom you have and the custom Rom you want to install. They have to be the same version or you will continuously be getting boot loops.
Sent from my FIH-FB0 using xda premium
Click to expand...
Click to collapse
hmm... wokay.. i downloaded 0.3b kernel of CK and flashing it from recovery!
is that fine for elol's ICS??
EDIT: i tried ur suggestion tooo.. the phone still is stuck with the boot screen.. doesnt proceed at all after that! T_T
the pranam said:
hmm... wokay.. i downloaded 0.3b kernel of CK and flashing it from recovery!
is that fine for elol's ICS??
EDIT: i tried ur suggestion tooo.. the phone still is stuck with the boot screen.. doesnt proceed at all after that! T_T
Click to expand...
Click to collapse
Kernel != ROM
Apparently you got your phone back from service with a GB load, that has kernel 2.6.32. You can not flash a newer release (Sharp, RC3 or ICS) that uses a newer kernel 2.6.35 with recovery. To do so you need to flash with SUT.
http://forum.xda-developers.com/showthread.php?t=1288293
mmaacc said:
Kernel != ROM
Apparently you got your phone back from service with a GB load, that has kernel 2.6.32. You can not flash a newer release (Sharp, RC3 or ICS) that uses a newer kernel 2.6.35 with recovery. To do so you need to flash with SUT.
http://forum.xda-developers.com/showthread.php?t=1288293
Click to expand...
Click to collapse
Hm.. thanks a lot mmaacc.. Finally my issue has been resolved.
Been breaking my head for the past 48 hours to somehow get back to Custom ROM..
Thanks a lot really! \m/
btw the reason i had given it for servicing was because the camera wasnt working..
and now the camera problem got solved. but now i notice again after changing the kernel, i have the same camera issue still..
has the kernel got anything to do with the camera?? may be thats why the service center changed the kernel?? wierd!
the pranam said:
btw the reason i had given it for servicing was because the camera wasnt working..
and now the camera problem got solved. but now i notice again after changing the kernel, i have the same camera issue still..
has the kernel got anything to do with the camera?? may be thats why the service center changed the kernel?? wierd!
Click to expand...
Click to collapse
Many ported ROMs have issues with certain features. The camera, radio or HDMI are all-time favourites here . Read the release descriptions before flashing to see what works and what not.
well im on jb rom and the tv-out isnt working so well (movie starts to lag when playing..) and i really need this option so i want to go back to ics rom. is there anything special i need to know before doing so?
itzikd1 said:
well im on jb rom and the tv-out isnt working so well (movie starts to lag when playing..) and i really need this option so i want to go back to ics rom. is there anything special i need to know before doing so?
Click to expand...
Click to collapse
Good question - looking forward to see an answer. Hope someone who knows will respond...
itzikd1 said:
well im on jb rom and the tv-out isnt working so well (movie starts to lag when playing..) and i really need this option so i want to go back to ics rom. is there anything special i need to know before doing so?
Click to expand...
Click to collapse
Which ROM are you currently using? If it's cyanogenMOD than you should know that it doesn't have that feature at all.
im on slim..just want to know if when going back to ics if i do it like i flash any rom? (with recovry) or do i need to reflash threw odin?
I just did this to test something, lost everything including internal sd card. I believe it had to do with the partition differences between ics and jb. Had access to recovery but had to buy an external sd card as the phone wouldn't boot and was seen as an unknown device in xp so using odin was out of the question. Got an ics rom on the external sd and flashed via recovery but said something about the encryption process was interrupted and everything needed to be wiped. Hope this helps some but backup what you need before flashing.
First flash your mobile with 3-file stock gingerbread firmware using odin... then flash a custom rooted kernel using odin again... later you can install cm9 from recovery in cwm...