Here are the new JB Adreno drivers which will boost graphic performances on our 2011 Xperias. I've made a benchmark with Nenamark 2 before flashing the libs on my stock 587 and i've got 24 fps. After i've flashed the libs i've also made a benchmark with Nenamark 2 and i've got 31,5 fps. Also the whole UI is much smoother than before.
Download from original thread​
bamsbamx said:
I had just found new Adreno libs in JBX ROM thread...
I thought that, if they are the latest release, they would work better than old ones. So I tried them with ICS ( Doomkernel and xDarkICS v.1 )
Result: More smoothness in the launcher, settings menu... Also tried them with Modern Combat 3... It runs more smoothly too!!! :victory::victory::victory:
Contras: Not found
EDIT: DON'T FLASH THEM IF YOU ARE USING GINGERBREAD (2.3.X), IT WILL CAUSE LOWER PERFORMANCE!
INSTRUCTIONS:
-Download new JB Adreno libs (attachment )
-Boot into recovery and make a nandroid backup
-Flash Adreno libs
-Enjoy!
*If they don't work, go to recovery again and use advanced restore of /system
Click to expand...
Click to collapse
With this new libraries device will have 30/40% increase of performance
(thanks for the info jgregoryj1)
Click to expand...
Click to collapse
If I am on CM9 or CM10, can I flash it? I mean, it's only for Sony release or can i stall it on FXP's ROMs?
Probably it should work on CM9 too,i don't know,it's working great on stock based roms,i don't know about CM9. In CM 10 i guess that they're preinstalled,because it's based on JB.
Working like a charm
Got 31.7FPS on Nenamark 2
I'm on Paranoid Android 2.1
I install right now the FXP138 without the new drivers and I pass the Nenamark's benchmark with 31fps result. I don't think that this is necessary, I think the same that the other user, it's implemented by default.
Thanks for the information,
I have to admit I haven't come across it in the Xperia Play section.
Which is why, at cases like this, creating a "duplicate" thread pointing to the original can be allowed.
Xperia 2011 line consists of many phones, with differect subforums, so information that is universally applicable can be a bit of a hassle to find.
Also, I tidied up the OP a bit for you.
So, kindly proceed on topic and no more talk about whether this thread should be here or not. Anyone in doubt, feel free to use the Report system and refrain from spamming.
Thanks for your cooperation!
Great. It works for me.. I use go launcher ex and I still have 189mb of ram. I notice better fps on benchmark.. Max 74fps on quadrant.. Great. I got 70max bfor
Sent from my LT18i using xda premium
Last Adreano libs form Qullcomm suite , not fleshable (Didnt try it , just shere )
n1kolaa said:
Last Adreano libs form Qullcomm suite , not fleshable (Didnt try it , just shere )
Click to expand...
Click to collapse
Testing...
Thx for Sharing, I Will Report..
jader13254 said:
Testing...
Thx for Sharing, I Will Report..
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Plz give us fleshable zip
n1kolaa said:
Plz give us fleshable zip
Click to expand...
Click to collapse
ASAP :silly:
Btw, its giving me a bootloop
jader13254 said:
...Got Booloop...
Click to expand...
Click to collapse
Did you get bootloop using that latest adreno drivers posted by n1kolaa?
Candy[MAN] said:
Did you get bootloop using that latest adreno drivers posted by n1kolaa?
Click to expand...
Click to collapse
Yeah
It Freezes at Blackscreen...
it's awesmoe ,i am on maxio's ics rom stock kernel,before i got 22 fps in nenamark 2,and now i have 32 fps,wow thanks for sharing
I used the firmware files from the newest zip (/system/etc/firmware/yamato_pfp.fw, yamato_pm4.fw, leia_pfp_470.fw and leia_pm4_470.fw). Phone boots normally.
When flashing the libs, phone does not boot, just a black screen.
EDIT: It seems there is further improvement, check the screenshots.
On the left is after I flashed the drivers from the OP and on the right when I added the firmware files that n1kolaa pointed out.
Here is a new flashable zip for anyone who wants it! Contains the new Adreno drivers and the newest firmware files.
iridaki said:
I used the firmware files from the newest zip (/system/etc/firmware/yamato_pfp.fw and yamato_pm4.fw). Phone boots normally.
When flashing the libs, phone does not boot, just a black screen.
EDIT: It seems there is further improvement, check the screenshots.
On the left is after I flashed the drivers from the OP and on the right when I added the firmware files that n1kolaa pointed out.
Here is a new flashable zip for anyone who wants it! Contains the new Adreno drivers and the newest firmware files.
Click to expand...
Click to collapse
I alredy flashed the file from first post and at first my phone did not boot
And for secound time after flshing it boots..
Now I am going test your file..It contains newer adreno driver than ones in first post?
EDIT:It works on 4.0.4 and LuPus5.2 kernel ..
iridaki said:
I used the firmware files from the newest zip (/system/etc/firmware/yamato_pfp.fw and yamato_pm4.fw). Phone boots normally.
When flashing the libs, phone does not boot, just a black screen.
EDIT: It seems there is further improvement, check the screenshots.
On the left is after I flashed the drivers from the OP and on the right when I added the firmware files that n1kolaa pointed out.
Here is a new flashable zip for anyone who wants it! Contains the new Adreno drivers and the newest firmware files.
Click to expand...
Click to collapse
does it work witk CM10/AOPK?
am2222 said:
I alredy flashed the file from first post and at first my phone did not boot
And for secound time after flshing it boots..
Now I am going test your file..It contains newer adreno driver than ones in first post?
Click to expand...
Click to collapse
No, newest lib files cause bootloop. It contains the files from frist post plus the fw files from the newest drivers.
Ritmasz said:
does it work witk CM10/AOPK?
Click to expand...
Click to collapse
It should. Make a nandroid, test and report back!
iridaki said:
No, newest lib files cause bootloop. It contains the files from frist post plus the fw files from the newest drivers.
It should. Make a nandroid, test and report back!
Click to expand...
Click to collapse
Thanks ..I tested your file and it works fine..I dont check benchmark befor installing it but now my GPU benchmark is similar yours..I think it worked
iridaki said:
No, newest lib files cause bootloop. It contains the files from frist post plus the fw files from the newest drivers.
Click to expand...
Click to collapse
Why did you not include the 2 leia files (leia_pm4_470.fw and leia_pfp_470.fw) into your bundle?
Are they not needed?
Related
We suport following accesorries
LIVEVIEW http://www.sonyericsson.com/cws/products/accessories/overview/liveviewmicrodisplay?cc=gb&lc=en#a
LIVEWATCH http://www.sonyericsson.com/cws/products/accessories/overview/smartwatch?cc=gb&lc=en
ANT+ http://www.thisisant.com/pages/technology/what-is-ant-plus
SOURCES
https://github.com/freexperia
DONATE
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=THUJZQB2U5PNC
Our team is not responsable of any damage that you or you phone will suffer by using our work
WORKING
AUDIO - ok
GPS - ok
WIFI - ok - new wl12xx_mac80211
TOUCH SCREEN - ok
CWM RECOVERY 5.5 - ok
BT - ok
GSM - ok
VIDEO DECODER - ok
3D - ok
GRALLOC - ok
HOTSPOT - ok
USB UMS - ok
CAMERA - ok (including video recording)
ANT+ - ok
HDMI - disabled
FM - ok
CAMERA - ok
NOT WORKING
look on bug tracker for remaining bugs
DOWNLOAD
http://unrestrict.li/FXP
Great. I hope the camera is fixable
Sent from my MK16i using Tapatalk
Thanks for your job ~
I will test it right now
I think pro need more roms
seems it is very fast
autorotation doesnt work, camera as writen
harware keyboard is as the normal cyanogen 7.2 without symbol key in german
( with at or ch the same )
waiting for the next step but it is absolute the right way thx
tnx,it's great rom
Thanks for your job
---------- Post added at 12:53 AM ---------- Previous post was at 12:20 AM ----------
ICS GAPPS link not work
i need downgrade to - CM7.2.0 - FXP103 after install cm9
but When after flash boot.img file(CM7) i choose zip file(CM7...) installed fail and show "status 7"
i need help
Just curious: I see that the download is for the MK16i. Will this also work on the MK16a?
I won't be testing this just yet (still have a locked bootloader thanks to horrible devs at Fido Canada), but want to know if it will work when I do decide to test it down the road.
need to be processed a little more
phoenix_rizzen said:
Just curious: I see that the download is for the MK16i. Will this also work on the MK16a?
I won't be testing this just yet (still have a locked bootloader thanks to horrible devs at Fido Canada), but want to know if it will work when I do decide to test it down the road.
Click to expand...
Click to collapse
As it's only kernel & system partition, there's no difference between Europeam "i" & American "a" version.
Good to know. I'll be keeping my eye on development, and probably take the plunge around the time a beta is released.
Thanks.
Without GSM working properly I won't test right now since I need the device to be usable on a daily basis, but I'll keep an eye on the progress. Great work Devs .
FXP105 released
USE GAPPS for IGS!!
FXP said:
FXP105 released
USE GAPPS for IGS!!
Click to expand...
Click to collapse
Please upload gapps to another mirror, megaupload was closed.
Also, since I didn't saw any installation instructions for the kernel, and since boot.img is present in the .zip, does this means that the Kernel is now flashed along with the zip package? ( I'm assuming before it was only possible with fastboot )
On the Arc Thread
Rycon33 said:
those who are having a hard time downloading the gapps, here -> ICS gapps
Click to expand...
Click to collapse
pedrodh said:
Please upload gapps to another mirror, megaupload was closed.
Also, since I didn't saw any installation instructions for the kernel, and since boot.img is present in the .zip, does this means that the Kernel is now flashed along with the zip package? ( I'm assuming before it was only possible with fastboot )
Click to expand...
Click to collapse
The kernel isn't flashed with the zip!!
You put update.zip and gapps.zip on root of sd-card
Then flash the boot.img kernel with fastboot on PC
Then when the phone is booting (at the freexperia logo) press the volume down key a few times to access the CWM Recovery, from there you update from zip and wipe
EDIT: What's FXP105 like? I had to revert to CM7, tried to live with it but couldn't lol..
Aaaand, what's going on with hdmi?
Am I dreaming or have you guys already fixed the camera?
EDIT:
sorry, I actually wanted to post this to Arc CM9 thread.
I wonder if the camera is fixed and working in the FXP 106 CM9
Sent from my MK16i using xda premium
The second post says the cam isn't working atm.
We'll just have to wait.
I can continue the project if i get proper feedback from you
thanks a lot to amarullz for providing aroma installer, and thanks to nightshack0 I have taken his installer and modded to work for this patch
had you ever feel that another galaxy s variant's forum have a ics rom which suits all your need but you cannot flash it because it is not yet ported to your device but now all this will not happen again with this patch you can install which ROM you want to flash there will be no boundation for you.
this patch will let you flash other I9000 or t959 roms I have not tried it on other variant but you can try and let me know if it works, I have tried to flash a nexus s rom and it was not flashing so just flash and let me know there is no harm no soft brick no hard brick just physical button will not work until you flash this patch or another rom
Click to expand...
Click to collapse
how to use this patch:- first flash the rom you wanted then this patch and if rom is not flashing read the FAQ
Click to expand...
Click to collapse
download link
*AROMA compatible v1.2:- http://bit.ly/rompat12 (39mb)
* AROMA compatible v1.1:- http://bit.ly/JpHy83 (41mb)
* VIBRANT patch:- http://db.tt/j3ZIdudZ (12mb)
Click to expand...
Click to collapse
PROS:- 1.flash which ics rom you want
2. new world with more rom have been revealed
3. rom chefs work have been reduced because now they do not need to port their rom.
4. small size just 12mb
5. TWRP kernel is pre bundled thanks to KRARVIND
Click to expand...
Click to collapse
CONS:- 1. you cannot get the build properties(build.prop) of the rom you are flashing instead you will get the build property which will not be related to any ics rom
Click to expand...
Click to collapse
the patch do not contains any file which can cause a bug and patch will only work on ics roms not gb
For further clarification read FAQ on second post
if you are getting status 7 or getprop error then a little work from your side is needed
extract the rom to a folder then go to /extracted folder/META - INF/com/Google/Android from there open updater-script and remove all getprop lines
come back to META - INF folder and delete all three files
zip the file and flash it in recovery
NOTE:- to edit updater script use jota text editor(android), notepad (windows)
Click to expand...
Click to collapse
update:- flashed fascinate rom by editing updater script and without resigning got it booted up but it cleared my efs folder so was not getting any network coverage, I got very depressed tried cleared data restore nandroid but nothing works then I thought about efs and with the backup I copy imei files to efs folder and after reboot I got coverage now I will not flash any fascinate rom just for testing but I can say that fascinate rom are working
Click to expand...
Click to collapse
PATCH FAQ
FAQ
Q.:- how to use this installer
Ans:- don't worry about this all the instruction have been given in the installer you just need to flash the package in recovery it is just like installation wizard of windows
Click to expand...
Click to collapse
Q.- will this also work on gb rom
Ans:- no the patch contains a kernel which cannot work with gb rom
Click to expand...
Click to collapse
Q.:- while flashing a galaxy s ics rom I got an error of assert failed what to do.
Ans:- first flash this patch then go to advance and select reboot recovery with new TWRP recovery flash the rom then again flash patch
Click to expand...
Click to collapse
Q.:- why you provided custom build.prop.
Ans:- if build.prop will not be provided then rom's build.prop will change you device's build properties which will not letyou flash files specially created for vibrant
Click to expand...
Click to collapse
Q.:- can I flash another vibrant ics kernel
Ans:- yes you can flash
Click to expand...
Click to collapse
Q.:- can I flash a kernel I9000 or I897
Ans:- no you cannot flash
Click to expand...
Click to collapse
Q.:- can you give some info about TWRP kernel
Ans:- a bigmem kernel with 720p recording patch originally can be found in Slim Ice rom thanks KRARVIND for this
Click to expand...
Click to collapse
Q.:- what can happen if I forgot to flash this patch
Ans:- nothing serious just the physical keys (menu, back etc.) will not work except this everything will be normal just boot to recovery and flash the patch and keys will work again
Click to expand...
Click to collapse
Q.:- I like your work where can I donate you
Ans:- my work is not that much to be donated and I got pocket money from my father I am just a teenager of seventeen just press thanks button and I will be happy
Click to expand...
Click to collapse
Q.:- Is there any modem provided Ans:- no, there is no modem in the package and will be provided in next update following in 3-5 days
Click to expand...
Click to collapse
WHAT'S NEW
v1.2
1. added bootanimation support
2. removed 30 data fix script
3. added vold.fstab
4. added shutdown charging animation files
5. only single modem is there to decrease size of the patch
6. added a new splash screen
v1.1
1. Added support of AROMA INSTALLER (thanks AMARULLZ)
2. Updated Semaphore kernel
3. Removed some unwanted files
4. Added some Init Scripts
5. Removed Lib files
6. Added Modem.bin
just in case
Jumped quick on that one!
beta tester requesting you to try this patch please do that
is this just for I9000 roms or can we use others? is so which ones?
this looks promising, im guessing this is just for ICS ROMS on I9000 since the title says "for ics"
Does this apply to ALL ICS ROMS in I9000 or are there specific ones?
xriderx66 said:
this looks promising, im guessing this is just for ICS ROMS on I9000 since the title says "for ics"
Does this apply to ALL ICS ROMS in I9000 or are there specific ones?
Click to expand...
Click to collapse
Well technically vibrant can flash i9000 roms with some minor issues like key mapping, sound path and gps.
This patch seems to take care of it (in a convenient way) and since ICS kernels seem to play nice it should work for all ICS roms.
xriderx66 said:
this looks promising, im guessing this is just for ICS ROMS on I9000 since the title says "for ics"
Does this apply to ALL ICS ROMS in I9000 or are there specific ones?
Click to expand...
Click to collapse
actually almost all variants but i am not sure, you can try every variants rom and write it here that working or not, so I can update the op with some info
I tried flashing this and the milestone 5 from I9000 and it did not work.
Sent from my SGH-T959 using XDA
Lochman79 said:
I tried flashing this and the milestone 5 from I9000 and it did not work.
Sent from my SGH-T959 using XDA
Click to expand...
Click to collapse
can you paste the link and what you flash first
http://goo-inside.me/devs/aokp/galaxysmtd/aokp_galaxysmtd_milestone-5.zip
Above is the rom I downloaded. First I installed the patch. Then rebooted into recovery. Lastly I tried installing the above rom and it failed.
Sent from my SGH-T959 using XDA
Lochman79 said:
http://goo-inside.me/devs/aokp/galaxysmtd/aokp_galaxysmtd_milestone-5.zip
Above is the rom I downloaded. First I installed the patch. Then rebooted into recovery. Lastly I tried installing the above rom and it failed.
Sent from my SGH-T959 using XDA
Click to expand...
Click to collapse
Did it just say like Installation Aborted in the Recovery? Or what else happened?
Did you make sure its not a bad download.
Get the .zip on PC and open it with winRAR, if its corrupted/bad download it'll give you errors, if it says nothing, its good and the patch probably needs working on.
Thats really weird too, it should've just flashed right on and even if the patch didn't work, it should've booted up and the capac. buttons would've been flipped etc. no signal (kernel) those would've been issues that are known.
This is amazing documentation.
Sent from my SGH-T989 using xda premium
I can't check the download as I have already deleted it, but I did check that it was a full download. Usually if it is a bad download, it will not be the correct mb size. And I forget exactly what it said when it failed...sorry. Has anyone else tried?
Sent from my SGH-T959 using XDA
sorry but it is not the fault of patch if the rom is not flashing
the patch will just install a working kernel and keylayout files and some minor tid-bits
did you install the rom with twrp kernel which is in the patch and also patch should be flashed again after flashing the rom
I did flash the patch first. Rebooted into recovery and then tried flashing the ROM. No go. ROM flash failed. Why hasn't anyone else tried this patch? Sheesh...scaredy cats? I'm surprised I'm the only one so far...
Sent from my SGH-T959 using XDA
Lochman79 said:
I did flash the patch first. Rebooted into recovery and then tried flashing the ROM. No go. ROM flash failed. Why hasn't anyone else tried this patch? Sheesh...scaredy cats? I'm surprised I'm the only one so far...
Sent from my SGH-T959 using XDA
Click to expand...
Click to collapse
Fine! I'll do it!
Haha but results may come later today.
Going to test on Infinitum 2.2
I'll update as soon as it boots up (hopefully).
Edit:
I got a Status 7 error
Seems like you can't flash something I9000 on a T959 recovery?
Sent from my SGH-T959 using xda premium
Did anyone tried to use them in ROM?
Adreno 2xx, and 3xx User-mode Android 4.2 Jelly Bean MR1 Graphics Driver (ARMv7)Download (9.0 mb)
Updated 04 Mar 13
This release contains the user-mode driver binaries for Qualcomm's Adreno 3xx and 2xx GPU on Google Android 4.2 Jelly Bean MR1. It has been tested with the CAF release A8064AAAAANLGD133402.1 and M8960AAAAANLGD230306.1. Supports any Adreno 2xx and 3xx GPU on Android 4.2 Jelly Bean MR1.
https://developer.qualcomm.com/mobi...phics-optimization-adreno/tools-and-resources
Released 4th Mar, so its kinda new, in latest stock we have previous version of them.
Adam
Hope fully someone can get them and make a flashable zip for them. And a return zip if we don't like them.
I would but I'm not confident enough with scripting to make sure I got everything right, permissions etc.
Noob question but what is this for?
Sent from my Nexus 4 using xda premium
casonswag said:
Noob question but what is this for?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
This is new driver for the gpu of the nexus 4. Sometimes with new driver, we can have better optimisazion, a smoothing experience etc.....
Craven68 said:
This is new driver for the gpu of the nexus 4. Sometimes with new driver, we can have better optimisazion, a smoothing experience etc.....
Click to expand...
Click to collapse
Now that sounds good!
Sent from my Nexus 4 using xda premium
So we should expect these drivers to be implemented in the ROMs now? Sweet updates galore thanks Google
Sent from my Nexus 4 using Tapatalk 2
wahahaay!!
installed them , don't boot, lol.... blank screen boot loop
oh well, now off to try and make a fix.zip
edit.. gotta it fixed
meangreenie said:
wahahaay!!
installed them , don't boot, lol.... blank screen boot loop
oh well, now off to try and make a fix.zip
edit.. gotta it fixed
Click to expand...
Click to collapse
anything you did to fix it? i downloaded and noticed it doesnt replace all files. didnt try to flash it yet - will do later
molesarecoming said:
anything you did to fix it? i downloaded and noticed it doesnt replace all files. didnt try to flash it yet - will do later
Click to expand...
Click to collapse
just got the original files replaced by the new drivers package from my rom and made a fix.zip, then pushed it in recovery to flash
meangreenie said:
just got the original files replaced by the new drivers package from my rom and made a fix.zip, then pushed it in recovery to flash
Click to expand...
Click to collapse
yeah. blank screen. you made it boot?
no, I got the blank screen too.
i wonder if they need the gpu updates in the kernel that harsh and franco have been playing with
our developers also trying to accommodate this on our device ( adreno 205 ) . Most of the people are getting black screen..
if any of you succeeded for your device please report.. :silly:
Hi guys...i'm moving all discuttion of MK kernel for stock 4.1.2 from Sami OS thred to here so that Developemnt therad of SamiOS remains clean
Kernel & link
latest version with No teraing and almost bug free... here are some changes/review
#version3Latest Version Download
#version4One more version it should work for i9070P & some more features
NOTE : This is not my work , @mkaluza initiated it for CM and @PolishVodka made it available for Stock 4.1.2 you should thank them both
Below is Older version with some bugs mentioned below...so not recommended !
PolishVodka said:
Here is mkaluza's kernel for stock JB, working:
Click to expand...
Click to collapse
http://www.mediafire.com/?x6gw3cg833x8k51
To install Flash zip in cwm or twrp
Personally I use smartassv2 (more smooth than default dynamic which is more battery friendly ! )
1.2GHz OC
And some init.ds to make UI more smoother...which you can find here
You guys should check mkaluza wikis in github too . Lots of useful info there, especially this:
https://github.com/mkaluza/project-zen/wiki/Janice-performance-settings
and Dynamic governor related wiki:
https://github.com/mkaluza/project-zen/wiki/Dynamic-governor
To all
some more info about MK stock kernel
Ram available for user was 647 MB for me ( 650 i n latest ! )
multitasking and app loading was exceptionally better !
to newbies plz don't blindly follow cocore commands/ init.d here bcz there are some changes here..[B].if you don't understand or used to with kernel commands and things , I advised you to stay way from this kernel for little while till final build comes[/B]
you can go for it now
and keep one thing in mind nandroid back up created by phillz recovery won't work with simple CWM ( atleast it didn't work for me) though it works with phillz
so if you use this kernel and you need to take backup... flash cocore and do it ...or use temporary CWM
Some discussion
1st one here is about 1st build...so if you wasn't aware of it you can skip this one and go to review directly
hastalafiesta said:
Try to extract 4.1.2 ramdisk and put it in /efs, then flash mkaluza kernel.
I have followed this simple step to make it bootable on cm 10.1.
You can find the guide to extract it on mkaluza thread.
Click to expand...
Click to collapse
it won't work like that in stock 4.1.2 but
anyway @PolishVodka made one more build and it booted ..i tested it...there are some minor bugs in it which i reported and he will make final build and publish it... ( though i didn't get reply yet... may be this is because of time difference and when i reported there should be night
here is copy of my final review which i send to him
PSS : you got my reply about kernel booting right ?
Click to expand...
Click to collapse
Yes, yes I got your previous message.
No problem I can wait till tomorrow for your review. Thank you.
Click to expand...
Click to collapse
good stuff 1st
performance is exceptionally good ...i mean very very good especially with smartassv2
battery life is decent with smartassv2 & dynamic
no random reboot at all with OC @1.2
overall very stable
now some bugs
i alreay told yesterday about faint horizontal lines ( though they are not hurting much but still if they can be removed it'll be great ) & Jumpy UI
now one weird bug and it must be fixed ...is when we rotate screen it flickers very badly and turn offs this problem is lesser in smartassv2 & excessive in dynamic
see videos below
smartassv2
dynamic
you can see smartass v2 can open COC without waking screen while in dynamic i have to wake it ( actually screen doesn't look it self but it turns off so to wake it i hve to lock it and unlock it again ) ...and while seeing such Turned off scrren in complete Dark i can see screen on/off faintly which means process of loading is there but don't know why screeb offs
one more video...i'm not sure you can see it properly but whole track of tamplerun 2 is little bit jumpy
i'm hoping you can fix this bugs and make more smoother...you can ask cocafe for help in both of these or you can check his github for help to make UI smooth ( see master branch bcz in refresh version UI is not that smooth )
and don't abandon this kernel without fixing because it has really good potential , support this kernel as long as you can
and finally you should change default governor to smartassv2.. it's more resopnsive than dynamic , better performance and not much battery drain ... Newbies will like it more and experience user can chance if they want to use Dynamic and see difference by them self
Finally Thanks for this kernel
Click to expand...
Click to collapse
buffer overflow said:
Yes, is working but without boot animation.i chose Pegasusqplus and Sioplus. UPDATE:CRT Off animation not working even if it is checked.
Click to expand...
Click to collapse
isaak said:
Maybe you were using a custom boot animation?
Then there is no kernel support.
Click to expand...
Click to collapse
stock boot animation was working for me
yah it doesn't support CRT but i don't care. and IMO this feature is now worth to waste time
Cassiusss said:
Have you noticed that with Mk Kernel on JB, the screen seems to be a bit brighter than usual?
Click to expand...
Click to collapse
yah it's more brighter this is because you are comparing it with cocore not stock kernel ...in cococre auto brightness was lowered !
.
@PolishVodka please put something on github, or at least tell us what have you changed in the kernel, if we collaborate we could have a bugless kernel! @ChronoMonochrome can you help us to fix the errors mentioned in the op?
jineshpatel30 said:
it won't work like that in stock 4.1.2
Click to expand...
Click to collapse
This is not true.
Official Mk Kernel works with no problem on stock 4.1.2. I've used JB-4.1-stock-CoCore-cwm-6.0.3.4.boot.cpio.gz ramdisk, renamed to boot.cpio.gz and placed in the efs folder. Then installed the kernel 5.4.0 no swap.
jineshpatel30 said:
it's more brighter this is because you are comparing it with cocore not stock kernel ...in cococre auto brightness was lowered!
Click to expand...
Click to collapse
I'm comparing it with stock kernel... and it's brighter. I have no doubts.
Boot animation working for me too.
Camera opening makes the screen tearing. (on both PolishVodka and official versions)
Cassiusss said:
This is not true.
Official Mk Kernel works with no problem on stock 4.1.2. I've used JB-4.1-stock-CoCore-cwm-6.0.3.4.boot.cpio.gz ramdisk, renamed to boot.cpio.gz and placed in the efs folder. Then installed the kernel 5.4.0 no swap.
Click to expand...
Click to collapse
i was talking about 1st release by PolishVodka. not any other official build
and official versson wasn't suppose to be used with stock rom..it may work but there is chance you end up with something bad
I'm comparing it with stock kernel... and it's brighter. I have no doubts.
Boot animation working for me too.
Camera opening makes the screen tearing. (on both PolishVodka and official versions)
Click to expand...
Click to collapse
if you have no doubt then check with some brightness and illumination test app and you will see stock & this kernel have same brightness level !
Not only camera opening any rotation to screen makes it tears most of times ...
& this thread is not about official MK if you still using it have some problem then you should report it in official thread
@jineshpatel30 : How much free ram you have ?
Force said:
@jineshpatel30 : How much free ram you have ?
Click to expand...
Click to collapse
647 MB...i wrote is in OP as well
Why ?
jineshpatel30 said:
i was talking about 1st release by PolishVodka. not any other official build
Click to expand...
Click to collapse
You have answered to Reinkaros here http://forum.xda-developers.com/showpost.php?p=59215110&postcount=804 and Hastalafiesta here http://forum.xda-developers.com/showpost.php?p=59255043&postcount=821
They have suggested to use official MK Kernel but you instead have tried to use the ramdisk with the first release of PolishVodka... so that's why your phone failed to boot. First release of PolishVodka will never boot. And that's why he released a second version.
And this second version seems to be nothing else than the official Mk Kernel with included stock ramdisk and some more zram.
Both official and PolishVodka versions act the same.
Ah, and that brightness levels are the same means nothing if the screen is still brighter...
Anyway now i'm using PolishVodka version and i'll be glad to help.
jineshpatel30 said:
647 MB...i wrote is in OP as well
Why ?
Click to expand...
Click to collapse
Sorry,i didn't see it. 647mb free ram ?! I think i never had more than 320-350 free ram and now is double. That's a big change. Did you try to open 2 games or open a game and a chat app or browser? The other app in background close?
647 MB is total ram, not free ram.
I fix screen tearing and flickering in my Kernel using this commit by mkaluza. Hope it works for PolishVodka :good:
display-s6e63m0: revert "remove DDR_50_OPP requirements for screen on"
Force said:
Sorry,i didn't see it. 647mb free ram ?! I think i never had more than 320-350 free ram and now is double. That's a big change. Did you try to open 2 games or open a game and a chat app or browser? The other app in background close?
Click to expand...
Click to collapse
Oh i though you asked about how much ram is there for user to use sorry
Cassiusss said:
You have answered to Reinkaros here http://forum.xda-developers.com/showpost.php?p=59215110&postcount=804 and Hastalafiesta here http://forum.xda-developers.com/showpost.php?p=59255043&postcount=821
They have suggested to use official MK Kernel but you instead have tried to use the ramdisk with the first release of PolishVodka... so that's why your phone failed to boot. First release of PolishVodka will never boot. And that's why he released a second version.
And this second version seems to be nothing else than the official Mk Kernel with included stock ramdisk and some more zram.
Both official and PolishVodka versions act the same.
Ah, and that brightness levels are the same means nothing if the screen is still brighter...
Anyway now i'm using PolishVodka version and i'll be glad to help.
Click to expand...
Click to collapse
Gald that you ate willing to help
Zram enabled in polishvodka verson ?
I don't think so
Epirex said:
I fix screen tearing and flickering in my Kernel using this commit by mkaluza. Hope it works for PolishVodka :good:
display-s6e63m0: revert "remove DDR_50_OPP requirements for screen on"
Click to expand...
Click to collapse
@PolishVodka
Check this...
Force said:
Sorry,i didn't see it. 647mb free ram ?! I think i never had more than 320-350 free ram and now is double. That's a big change. Did you try to open 2 games or open a game and a chat app or browser? The other app in background close?
Click to expand...
Click to collapse
You got very very excited boy !!!!
You guys should check mkaluza wikis in github too . Lots of useful stuff there, especially this:
https://github.com/mkaluza/project-zen/wiki/Janice-performance-settings
and Dynamic governor related wiki:
https://github.com/mkaluza/project-zen/wiki/Dynamic-governor
Reinkaos said:
You guys should check mkaluza wikis in github too . Lots of useful stuff there, especially this:
https://github.com/mkaluza/project-zen/wiki/Janice-performance-settings
and Dynamic governor related wiki:
https://github.com/mkaluza/project-zen/wiki/Dynamic-governor
Click to expand...
Click to collapse
Added to OP
hastalafiesta said:
@ChronoMonochrome can you help us to fix the errors mentioned in the op?
Click to expand...
Click to collapse
Why asking me? I'm not a stock user and don't have janice too. Never had mentioned bugs. I can only suggest to use Interactive/ZenX to make some games lagless.
P.s. original thread of the tweak for increased RAM http://forum.xda-developers.com/gal...jb-kk-lp-ram-repartition-to-691-1-mb-t3043437 .
ChronoMonochrome said:
Why asking me? I'm not a stock user and don't have janice too. Never had mentioned bugs. I can only suggest to use Interactive/ZenX to make some games lagless.
P.s. original thread of the tweak for increased RAM http://forum.xda-developers.com/gal...jb-kk-lp-ram-repartition-to-691-1-mb-t3043437 .
Click to expand...
Click to collapse
Just because I know you have a great knowledge about kernel and so I thought about asking you.:good:
hastalafiesta said:
Just because I know you have a great knowledge about kernel and so I thought about asking you.:good:
Click to expand...
Click to collapse
Just wanted to say that mentioned bugs maybe not a kernel fault. It's difficult to advice anything especially because it's just reports about lagginess in some games. I'm not a hard gamer too. Maybe you can compare same things on various ROMs.
ChronoMonochrome said:
Just wanted to say that mentioned bugs maybe not a kernel fault. It's difficult to advice anything especially because it's just reports about lagginess in some games. I'm not a hard gamer too. Maybe you can compare same things on various ROMs.
Click to expand...
Click to collapse
Well i'm also not hard gamer..and i gave the examples where bugs was most clear
I took Dolphin browser to show screen tearing while rotation
Then COC for screen goes off during loading ( perhaps this happes in landscape apps only )
And finally TR2 to show jumpyness
But these bug weren't only in this things specifics...one can see jumpy UI in setting also , screen tearing in other apps like one person said in camera on/off
So it's not just about game and rom related bcz with same Rom and cocore any of given bugs is not there !
Anyway i didn't get any reply from PolishVodka since last build so may be he's too busy or may be this is it for this kernel !
@hastalafiesta
If you have some knowledge about kernel and you wants to continue you should start it from MK kernel Github bcz @Cassiusss was able to boot it directly on stock by boot.cipo.gz and you can ask PolishVodka if you stuck on boot , about how to fix it
Mod Edit : Link Removed.
Issues :
Issues you report; daily drivers working!!
Fixed :
None yet
Builds :
Build 1 : 21/01/2019 (testing)
Announcements :
Build 1 21/01/2019 : LineageOs-v16.0 [Build 1] uploaded.
Please report bugs if found any.
Click to expand...
Click to collapse
A small amount of token would be appreciated as an encouragement.
Click to expand...
Click to collapse
Please Hit Thanks if you found this useful. It costs nothing.
Click to expand...
Click to collapse
You can buy me a Coffee at my PayPal, if you found this helpful.
Click to expand...
Click to collapse
Ui is laggy
hi, thanks for this rom, installed on A510F successfully.
ui is a little laggy but the rom is usable everyday
This ROM can run on A710, and it works fine. I used your files on GitHub to fix bugs, and now it works perfect.:good: Thank you bunnyy
Hi Bunny,
Congratulations for this first version!
You did a great job.
In fact I have not found any triple crashes, any kind of problems with third-party apps, no spontaneous reboot, no jamming and / or blocking.
Obviously there is still work on the front of the optimization, in fact the UI laggy in practically every sector, consumption is as anomalous (even if they are not bad to be the first version) and the recharge has problems of overheating, in addition to do not indicate if it is a fast or slow charge
I hope you will continue to develop and that every month you will update the security patches, and maybe one day you will also grow into making it a LOS Official (as it was for dotOS).
hi
bunny the rom is very good .but only one request
please add indian volte file ..
On stock geekbench multi core score is 3600
On this rom or any other,multi core
score is very smaller And this is 1600
Please repair optimilazation
Sorry for my bad english ?
Thanks
rusiu559 said:
On stock geekbench multi core score is 3600
On this rom or any other,multi core
score is very smaller And this is 1600
Please repair optimilazation
Sorry for my bad english ?
Click to expand...
Click to collapse
Try this,. This one is for A710, you need flash A510 boot.img and modify the device information.
https://mega.nz/#!Lchmla7C!nLfT--xu9aK1BlJLBNrbX-G9OwUNaBTVtkflS2HE_EE
When a new build comes out, can I just flash the new build over the old build without wiping everything? (TLDR= Dirty Flash Update/New Build?)
Installed yesterday on french A510F.
No problem until now except in configuration wizard if I choose to configure via data instead of WiFi.
Thank you!
Can't find a way to root in order to restore my Titanium backups, is there a way that works? (I've tried these zip: SuperSu v2.82, addonsu arm 16.0 unofficial, magisk v18.0)
Great man! All the best hope you make it stable soon
This ROM on A710FD?
I am bit confused. Is this ROM can be installed on A710FD? Are the partitions of A5 and A7 same?
DF11GB said:
This ROM can run on A710, and it works fine. I used your files on GitHub to fix bugs, and now it works perfect.:good: Thank you bunnyy
Click to expand...
Click to collapse
darenhoff said:
I am bit confused. Is this ROM can be installed on A710FD? Are the partitions of A5 and A7 same?
Click to expand...
Click to collapse
Yes, it can be installed on all a710 devices ,and I'm trying to port it for a7108 and a5108. I can tell you how to install it on a710, but can't give you the zip. Because some files are from GitHub. The partitions of a510 and a710 are totally the same, except a5108 and a7108.
Really looks good idea
Hi! Can you please elaborate a bit.
The link you have provided (filename probably in chineese) is a boot image.
So, on my A7 (2016), after TWRP(which my device already has), this boot image is to be flashed - is that right? Or ROM is to be flashed then reflash this boot image? and then gapps?
Are you using this device and ROM? I am worried because not a single ROM based on 8.1 for this device is working 100%. Every ROM has its own problems and benefits.
Thanks and Regards
Any developer, if can confirm above, please.
DF11GB said:
Try this,. This one is for A710, you need flash A510 boot.img and modify the device information.
https://mega.nz/#!Lchmla7C!nLfT--xu9aK1BlJLBNrbX-G9OwUNaBTVtkflS2HE_EE
Click to expand...
Click to collapse
darenhoff said:
Hi! Can you please elaborate a bit.
The link you have provided (filename probably in chineese) is a boot image.
So, on my A7 (2016), after TWRP(which my device already has), this boot image is to be flashed - is that right? Or ROM is to be flashed then reflash this boot image? and then gapps?
Are you using this device and ROM? I am worried because not a single ROM based on 8.1 for this device is working 100%. Every ROM has its own problems and benefits.
Thanks and Regards
Any developer, if can confirm above, please.
Click to expand...
Click to collapse
You can flash this zip any time. Before flash this one, you need flash the ROM, and then flash the vendor of a710 (You can find it on bunnyy's GitHub). Without doing that, you can't use camera.
I have a a710k, and I'm using this ROM.
@bunnyy: are you following this
This thread is for A5 devices, so I hope your uploades are for A5 (2016). But somebody saying it can be flashed on A7 (2016).
Is it correct? OR it may brick a7
bunnyy said:
Issues :
Issues you report; daily drivers working!!
Fixed :
None yet
Builds :
Build 1 : 21/01/2019 (testing)
Announcements :
Build 1 21/01/2019 : LineageOs-v16.0 [Build 1] uploaded.
Click to expand...
Click to collapse
Work ota update ?
DF11GB said:
You can flash this zip any time. Before flash this one, you need flash the ROM, and then flash the vendor of a710 (You can find it on bunnyy's GitHub). Without doing that, you can't use camera.
I have a a710k, and I'm using this ROM.
Click to expand...
Click to collapse
You said you installed this on A7 2016 device, does it run smoothly with no problems? Can you share us the step by step procedure? Will it also be installed on my A710Y device?Thanks