Database Develop

Want to update ics

Yes i want to update to ICS. I have previously tried but ended in bootloop.
My current configuration is.
Firmware: 2.3.5
Baseband 19000XXJVT
Kernel: 2.6.35.7-19000XXJVT-CL617736
[email protected] #Semaphore_1.9.1bm
Can i just go into CWM and install

It depends which ICS Rom you want to use, theres Team Hacksung's ICS Port or One Cosmic's, imo TeamHacksungs one is the better choice, its easier to flash and to me, its slightly faster and more things in the Rom are working, if you want to flash team HackSung's one then just create a backup and flash over your current Rom if you want to use One Cosmics port, then you need to flash it over a Cyanogen Mod base Rom, simply flash a CM7 Rom, factory wipe, then flash the ICS Rom over it
(Be sure to hit the thanks button below the message if i helped)

samy.3660 said:
Yes i want to update to ICS. I have previously tried but ended in bootloop.
My current configuration is.
Firmware: 2.3.5
Baseband 19000XXJVT
Kernel: 2.6.35.7-19000XXJVT-CL617736
[email protected] #Semaphore_1.9.1bm
Can i just go into CWM and install
Click to expand...
Click to collapse
in my expirience onecosmics is better, pure speed, no FCs great battery life and almost everything works.
http://forum.xda-developers.com/showthread.php?t=1398223

kiantrel said:
in my expirience onecosmics is better, pure speed, no FCs great battery life and almost everything works.
http://forum.xda-developers.com/showthread.php?t=1398223
Click to expand...
Click to collapse
+1
Though I can't say much about battery life.. still to test it properly....

i installed Onecosmic's ICS Port Android 4.0.3 RC1 but wi-fi doesn't seem to work any suggestion?

samy.3660 said:
Yes i want to update to ICS. I have previously tried but ended in bootloop.
My current configuration is.
Firmware: 2.3.5
Baseband 19000XXJVT
Kernel: 2.6.35.7-19000XXJVT-CL617736
[email protected] #Semaphore_1.9.1bm
Can i just go into CWM and install
Click to expand...
Click to collapse
Follow this Video Guide for flashing ICS

kkhvicha said:
i installed Onecosmic's ICS Port Android 4.0.3 RC1 but wi-fi doesn't seem to work any suggestion?
Click to expand...
Click to collapse
try changing your modem.. if that doesn't work then flash again..

[Q]Kernel ?

Hi, I would like to know what is kernel, and what would it change in the phone, performance and display, i'm a gamer, so i would like a good kernel for games like asphalt 6, FL Commando and And NOVA 6, and how to install it, i'm using Zeus 6.32n
thanks a lot
Sent from my LG-P970 using xda premium. If I Helped You, Hit The Thanks Boutton. Jesus !!

I must admit that p970 is not so hard developed yet and as far as im concerned, we havent got any custom kernel for stock-based rom like Zeus. However, Diana kernel (which is used in newest version of Zeus v.36) is best for performance and battery life. As long as someone wont make a miracle, its only-one custom kernel for stock based ROMs.
In addition, it has overclocking and is tweaked for performance, so why do you need other kernel? Try installing newest version of zeus ROM and test if you are pleased with results.

Similar question: So if i install the newest zeus i already have a new kernel on the phone or do i still need to update the kernel? I now have Zeus v7.03 and the kernel version: 2.6.35. Any help is appreciated! Thx
Hbohd said:
I must admit that p970 is not so hard developed yet and as far as im concerned, we havent got any custom kernel for stock-based rom like Zeus. However, Diana kernel (which is used in newest version of Zeus v.36) is best for performance and battery life. As long as someone wont make a miracle, its only-one custom kernel for stock based ROMs.
In addition, it has overclocking and is tweaked for performance, so why do you need other kernel? Try installing newest version of zeus ROM and test if you are pleased with results.
Click to expand...
Click to collapse

rooney_10 said:
Similar question: So if i install the newest zeus i already have a new kernel on the phone or do i still need to update the kernel? I now have Zeus v7.03 and the kernel version: 2.6.35. Any help is appreciated! Thx
Click to expand...
Click to collapse
If you install a newer Zeus Version 6.33 and up you have a different kernel that can use lower and higher frequencies. 2.6.35 is the basic linux kernel, alle Diana kernels have that number too. Up too diana kernel 2.3 it seems to be very stable, after 2.3 the kernels are all betas up till now and well beta is still experimental, for some it works well, for others maybe not. If you install Zeus 7.02 or .03 it comes with a beta kernel, but I'm rather sure you can still install the stable Diana kernel 2.3 after you installed Zeus 7.02 or .03.
BTW all that can be read in http://forum.xda-developers.com/showthread.php?t=1454274 , but OK it might take some time to go read that all, but before you ask more questions maybe you should at least try to read some of that thread (first page and maybe about last 3 weeks).

SaschaKH said:
If you install a newer Zeus Version 6.33 and up you have a different kernel that can use lower and higher frequencies. 2.6.35 is the basic linux kernel, alle Diana kernels have that number too. Up too diana kernel 2.3 it seems to be very stable, after 2.3 the kernels are all betas up till now and well beta is still experimental, for some it works well, for others maybe not. If you install Zeus 7.02 or .03 it comes with a beta kernel, but I'm rather sure you can still install the stable Diana kernel 2.3 after you installed Zeus 7.02 or .03.
BTW all that can be read in http://forum.xda-developers.com/showthread.php?t=1454274 , but OK it might take some time to go read that all, but before you ask more questions maybe you should at least try to read some of that thread (first page and maybe about last 3 weeks).
Click to expand...
Click to collapse
Thx for the information! I did read some of the thread, but as you said it will take some time to read the whole thing

Problems booting to install Roms

Because some roms are left hanging in the beginning and not booting, my phone is a Huawei U9000 X6, I tested several of the forum but none work properly, now I have Android v2.3.7 and want to do the upgrade to 4.0.
In advance thank you very much.

TheMasterMindGT said:
Because some roms are left hanging in the beginning and not booting, my phone is a Huawei U9000 X6, I tested several of the forum but none work properly, now I have Android v2.3.7 and want to do the upgrade to 4.0.
In advance thank you very much.
Click to expand...
Click to collapse
You gotta remember this ;-
You need kernel 2.6.35.7 for all ICS (Ice Cream Sandwich) Roms
You need kernel 2.6.32.9 for most GB (Ginger Bread) Roms
Android RC3 runs on 2.6.35.7
I think you should flash RC3 via SUT. Flashing RC3 gives you a stable OS and automatically gives you Clockworkmod so you can boot into recovery and flash any ics rom directly after this or any 2.6.35.7 based GB Rom
For some reason though, on neither kernels, this -http://forum.xda-developers.com/showthread.php?t=1619837 boots for me.
The indicator of wrong kernel is Blue screen on bootup

nachiketa.ramesh said:
You gotta remember this ;-
You need kernel 2.6.35.7 for all ICS (Ice Cream Sandwich) Roms
You need kernel 2.6.35.2 for most GB (Ginger Bread) Roms
Android RC3 runs on 2.6.35.7
I think you should flash RC3 via SUT. Flashing RC3 gives you a stable OS andautomatically gives you Clockworkmod so you can boot into recovery and flash any ics rom directly after this or any 2.6.35.7 based GB Rom
For some reason though, on neither kernels, this -http://forum.xda-developers.com/showthread.php?t=1619837 boots for me.
The indicator of wrong kernel is Blue screen on bootup
Click to expand...
Click to collapse
thank you very much for your valuable help, the problem I think is the kernel that I have now:
kernel: 2.6.32.9.
is there any way I can change the current kernel??

TheMasterMindGT said:
thank you very much for your valuable help, the problem I think is the kernel that I have now:
kernel: 2.6.32.9.
is there any way I can change the current kernel??
Click to expand...
Click to collapse
Flashing RC3 automatically gives you the ics kernel.
You can also use CK Kernel 0.4d in dev threads and flash via cwm but it will not work with your current rom

nachiketa.ramesh said:
Flashing RC3 automatically gives you the ics kernel.
You can also use CK Kernel 0.4d in dev threads and flash via cwm but it will not work with your current rom
Click to expand...
Click to collapse
thank you very much by observation I will look for files on the issues.

Here are the links you can refer to
RC3-
http://forum.xda-developers.com/showthread.php?t=1446449
CK Kernel 0.4d
http://forum.xda-developers.com/showthread.php?t=1728461

Help From .35 kernel to .32 kernel possible?
Hi i just wanted to ask since im on .35 kernel and using an ICS based rom CM9/AOKP ROM, how will i be able to go back to .32 kernel any links where i can get it and how to do it? i want to go back to MIUI .2.4.13 by free radical? thanks

endlesone said:
Hi i just wanted to ask since im on .35 kernel and using an ICS based rom CM9/AOKP ROM, how will i be able to go back to .32 kernel any links where i can get it and how to do it? i want to go back to MIUI .2.4.13 by free radical? thanks
Click to expand...
Click to collapse
Possible
Flash RC 1 through SUT LR
then Flash MIUI by FR
enjoy

RC1 from Andro id v3.3 rc1?
vivekb said:
Possible
Flash RC 1 through SUT LR
then Flash MIUI by FR
enjoy
Click to expand...
Click to collapse
by RC 1 you mean FB0G-Andro-ID_V3.3-RC1.7z
thanks

endlesone said:
by RC 1 you mean FB0G-Andro-ID_V3.3-RC1.7z
thanks
Click to expand...
Click to collapse
Yes. That should do the trick.
As an alternative, you can still flash GB stock from your manufacturer (most likely .32 kernel).

=)
k1chy said:
Yes. That should do the trick.
As an alternative, you can still flash GB stock from your manufacturer (most likely .32 kernel).
Click to expand...
Click to collapse
thanks for the reply.

After spending all night struggling with installing the kernel achieves install this ROM but I use the touch screen, anyone know what I can do???
rom is:
http://forum.xda-developers.com/showthread.php?t=1798814

[PRO][KERNEL] Riyal-based kernel with better touchscreen precision & SE logo

Hi, this is my first kernel, this based on the latest Ultima ICS kernel from riyal, with two minor tweaks
-now touchscreen reponse while swiping is 4px instead of 9px, so no more bumpy movements while draging items
-official "Sony Ericsson" boot logo
Information about the touchscreen problem (if you have not noticed it):
http://talk.sonymobile.com/thread/40474
the problem is present in latest FXP (but probably not in next's) and also in stock kernel ICS
The solutions was 99% done by nicklas lof, here:
http://review.cyanogenmod.com/#/c/22164/
Works in Stock ICS, 431 and 587, it should work with FXP releases too
Installation:
Flash kernel using fastboot
Flash original Riyal wifi Modules using CWM
Riyals kernel thread is here
I do not deserve any credits on this, I just moved a line in code to compile and changed logo. :good:

What is Stock ICS 538? or you mean 587

the recovery are same or did u update it too ?

I have to install the img with fastboot ... And I have everything right???

Thanks for this kernel. will give it try one of these days

New Kernel for PRO [MK16a/i]
Thanks dafsoftware :good:
So just to clarify. Everything is the same as Ultima ICS Kernel v1.4 with the changes you made for the touchscreen precision and SE-X logo. The WiFi modules to flash are also of the v1.4 too right?
I'll try this when you confirm my query, as I am running on the Stock ICS MK16a 4.1.B.0.587 (US) build. I'll try to post any issues that I come across after flashing
[email protected]
MK16a Rooted, BL Unlocked
Kernel: LuPuS-PRo-v3-LiNaRo
Stock ICS ROM .587
BB 77

[email protected] said:
Thanks dafsoftware :good:
So just to clarify. Everything is the same as Ultima ICS Kernel v1.4 with the changes you made for the touchscreen precision and SE-X logo. The WiFi modules to flash are also of the v1.4 too right?
I'll try this when you confirm my query, as I am running on the Stock ICS MK16a 4.1.B.0.587 (US) build. I'll try to post any issues that I come across after flashing
[email protected]
MK16a Rooted, BL Unlocked
Kernel: LuPuS-PRo-v3-LiNaRo
Stock ICS ROM .587
BB 77
Click to expand...
Click to collapse
You are right, this is based in Ultima ICS v1.4, in fact Riyal already has this in his sourcecode, so next's versión should already have this fix, you have to use v1.4 modules

lawong said:
the recovery are same or did u update it too ?
Click to expand...
Click to collapse
Recovery is the same

josejuangr said:
I have to install the img with fastboot ... And I have everything right???
Click to expand...
Click to collapse
After you flash the kernel you have to flash latest wifi modules from riyal, using CWM

Why now 4px? Was Gingerbread not 2px?

paul5425 said:
Why now 4px? Was Gingerbread not 2px?
Click to expand...
Click to collapse
I think GB was 2px, but with the current driver is quite hard to tap on links at 2px, I will compile one at 2px if you want to try

I use this kernel with stock ICS 587 and my phone gets freeze every time I unplug from charger and PC.
Anyone has the same problem?

Can you please update stock kernel to use this fix.
Or give some link to add recovery to stock kernel.
Thanks,
Rajesh

rajeshjamnadas said:
Can you please update stock kernel to use this fix.
Or give some link to add recovery to stock kernel.
Thanks,
Rajesh
Click to expand...
Click to collapse
This is based on latest riyal changes, I think it has voltages messed up, so I will have to build it from stock kernel someday. I dont know how to add recovery to it.

I am, but not exactly when disconnecting the charger, only when its charging and very randomly, I think the source I am using has a messed up voltage table, I need to find the original voltage tables to fix it.

dafsoftware said:
I am, but not exactly when disconnecting the charger, only when its charging and very randomly, I think the source I am using has a messed up voltage table, I need to find the original voltage tables to fix it.
Click to expand...
Click to collapse
omg so nice plzz make it bugfree and everybody will be happy! Currently using this in combi with ics Miui. Thanks alot bro for ur work!
If u need any donation or help i will be there.
hopefully u will add more things if u have the time:good::good::good::laugh:

xperiap said:
omg so nice plzz make it bugfree and everybody will be happy! Currently using this in combi with ics Miui. Thanks alot bro for ur work!
If u need any donation or help i will be there.
hopefully u will add more things if u have the time:good::good::good::laugh:
Click to expand...
Click to collapse
+1
great kernel, thanks for your work.
also flashed it with MIUI ICS, feels smoother and fast.
thanks again.

dafsoftware said:
I think GB was 2px, but with the current driver is quite hard to tap on links at 2px, I will compile one at 2px if you want to try
Click to expand...
Click to collapse
OK - after reading more it sounds like there has been some structural change to the driver model (something that needs fixed at a deeper level). Anyway, it would be great if you could additionally provide us with a ROM set at 2px just so we can see for ourselves.

Ext4
Does this kernel support the Ext4 partition? Great kernel by the way...
Edit : and.... Swap partition?

Even better than that, I notice that the Touch Move app has a "tune" mode which allows the user to tune the sensitivity themself. It's currently only compatible with a couple of GSII custom kernels:
http://tegrak2x.blogspot.co.uk/2011/10/touch-move-tune-compatible-kernels.html?m=1
It would be interesting to see if we could get Touch Move Tune working on Xperia devices too.
Sent from my MK16i using xda app-developers app

(development)(kernel 3.x )help reqd.(13/3/14)

Help required by team duos-chaos in development of kernel 3.x for galaxy y duos to port ics and make it bug less mote stable and give more to device
Having trouble as its not booting maybe somthing is missing or dont know whats the problem
3.x kernel config. File of the kernel being developed by duos-chaos team
https://drive.google.com/file/d/0B1eijLv0CgrVN1ZlOHRwZkk2Rkk/edit?usp=sharing
Samsung stock config.
https://drive.google.com/file/d/0B1eijLv0CgrVX0E1bmpnaEZhelU/edit?usp=sharing
Team members
Xeon.zolt
Raw99
Akash
i am so perfect at sleeping i can do it with my eyes closed
sent from -
xeonzlot.blogspot.com

Kernel source used https://android.googlesource.com/kernel/samsung.git/+/android-samsung-3.0-ics-mr1
i am so perfect at sleeping i can do it with my eyes closed
sent from -
xeonzlot.blogspot.com

why develop kernel 3.xx when you can port bieltv kernel for ICS?
kernel 3.xx requirment are android 4.4. kit kat and above

nikos5800 said:
why develop kernel 3.xx when you can port bieltv kernel for ICS?
kernel 3.xx requirment are android 4.4. kit kat and above
Click to expand...
Click to collapse
You can run android 4.4.x with modified 2.6.xx.x kernel.
Sent from my highly pimped Galaxy Pocket.
1. Love doesn't need any reason.
2. Wanna speed up 3G (not 4G LTE)?
Here it is:
http://forum.xda-developers.com/showthread.php?t=2586876
3. My blog
4. Press the thanks button if I really helped/assisted you.

If we modify a kernel or port it . It might be buggy and we just wanted a non buggy or a good thing
Ics can be run on 2.x with modification and 3.x with normal one its just like running a new sports with cycle wheels on patched kernel
i am so perfect at sleeping i can do it with my eyes closed
sent from -
xeonzlot.blogspot.com

3.x is made for ics....building a new kernel is better than porting other ....it will less buggy and stable though.....beil is wrking for galaxy y .... so we are making our own one.....more stable than others

Akash sky said:
3.x is made for ics....building a new kernel is better than porting other ....it will less buggy and stable though.....beil is wrking for galaxy y .... so we are making our own one.....more stable than others
Click to expand...
Click to collapse
Nope. we can boot ics with 2.6.35.7
its just ramdisk thing.
3.xx is needed for 4.4
we can boot others with 2.6.xx with lil mods in sources and ramdisk

Galaxy Ace booted android 4.4 on 2.6.x kernel

Ashutos1997 said:
Galaxy Ace booted android 4.4 on 2.6.x kernel
Click to expand...
Click to collapse
thats great... btw 3.xx is nothing but modded 2.xx afaik

Nachiket.Namjoshi said:
thats great... btw 3.xx is nothing but modded 2.xx afaik
Click to expand...
Click to collapse
ok den mr.hero can you mode 2.xx kernel for cm9 or you will give me example of beil

so tell the modes required for 2.x kernel
i am so perfect at sleeping i can do it with my eyes closed
sent from -
xeonzlot.blogspot.com